Hello,
I have installed Magldr 1.3 + NANRDOID MDJ 2.6 ..
I am unable to go to the boot from ad sd option ... As in if i have to update any .zip file .. and I choose the option for ad sd boot .. it will get stuck in GO GO GO screen ..
Please help me ..
I have used task 29 and installed everything again ..
NOTE : I have installed a new sd card and updated the recover_250 file also.
Thanks ...
Have you installed a CWM 1.3 partition? You need to flash a partition from here to provide you with CWM Recovery. I know you say you have a recover_250 file, but is it the latest version?
To go to CWM you need to select the AD Recovery option not Boot AD SD.
ClydeB1 said:
Have you installed a CWM 1.3 partition? You need to flash a partition from here to provide you with CWM Recovery. I know you say you have a recover_250 file, but is it the latest version?
To go to CWM you need to select the AD Recovery option not Boot AD SD.
Click to expand...
Click to collapse
Thank you for the reply.
Yes i have installed the latest version1.3 only and I am talking about going into the option for BOOT AD SD .... I want to install another ROM ...
and when i click the BOOT AD SD option .. it will get stuck in the GO GO GO screen ...
I hope i am able to explain my situation ...
When i go to BOOT AD SD option in MAGLDR V1.13 .. it says ..
SD KERNEL OPEN FAILED
Its working now
Thank you
ajsam4u said:
Its working now
Thank you
Click to expand...
Click to collapse
how did you solve this problem because am having the same problems, pls help me out.
mikeysho said:
how did you solve this problem because am having the same problems, pls help me out.
Click to expand...
Click to collapse
If you are using magldr 1.13 with cwm 1.3 partitions you no longer go to Boot AD SD. To enter CWM you need to go to AD Recovery on magldr menu.
I had the same problem.
but now i have another problem which recovery should i take? 150 250 400???
greetz
nummrt47 said:
I had the same problem.
but now i have another problem which recovery should i take? 150 250 400???
greetz
Click to expand...
Click to collapse
This depends on what ROM you want to install using CWM. A large ROM like a Desire HD build requires more then a light ROM with only the essentials baked in. If you really aren't sure what to flash just check the guide accompanied with the ROM.
does this mean that I have to install CWM every time i want to install another ROM??
nummrt47 said:
does this mean that I have to install CWM every time i want to install another ROM??
Click to expand...
Click to collapse
Technically, no. Not unless the partition layouts for the different ROM's you are trying are different and in turn they require you to run DAF (which re-partitions your NAND storage).
If they are the same then your partition layout won't be changed and your recovery partition, which is where CWM resides, won't be affected at all when switching ROM's.
but i could also install the biggest one(400) and everything would work because I can't have a too small partition???
could that work??
Related
I have a problem I can't understant how the new maglar recovery can be used? Someone please help me it is posible to have dandiest's desire z rom ( wich is daf) and cwm recovery at the same time?
sp33dy_gtx said:
I have a problem I can't understant how the new maglar recovery can be used? Someone please help me it is posible to have dandiest's desire z rom ( wich is daf) and cwm recovery at the same time?
Click to expand...
Click to collapse
You have to partition your SD card (gparted/ubuntu...)
1st: fat32 put the rom-zip into the root of this partition
2nd: ext4 1GB
3rd: ext4 400MB
4th: linux swap
Install CWR via MAGLDR like flashing a NAND rom (DAF etc...)
reboot, enter MAGLDR and goto boot AD SD - now U enter CWR
and then follow the steps as mentioned in the rom thread. (chose ZIP dfrom SD card... install... reboot...)
Good luck
It´s quite easy.
The above post will work UNLESS you use one of the cwm 1.3 partitions. Using cwm 1.3 puts the recovery files on NAND (so no need to copy files to the root of your sd card for recovery to work. In order to boot into Recovery you need to select AD Recovery instead of Boot AD SD
ClydeB1 said:
The above post will work UNLESS you use one of the cwm 1.3 partitions. Using cwm 1.3 puts the recovery files on NAND (so no need to copy files to the root of your sd card for recovery to work. In order to boot into Recovery you need to select AD Recovery instead of Boot AD SD
Click to expand...
Click to collapse
Sry, maybe I missunderstand the OP. Sounded for me like he has trouble to get installed DesireZ by using ClockWork AND trouble when installing Clockwork.
So let me conculde if I want to use this rom http://forum.xda-developers.com/showthread.php?t=913597 I cant I must use a rom with zip no? to be clear. thx guys
sp33dy_gtx said:
So let me conculde if I want to use this rom http://forum.xda-developers.com/showthread.php?t=913597 I cant I must use a rom with zip no? to be clear. thx guys
Click to expand...
Click to collapse
Try and follow this I found by searching for clockwork mod in the thread.
http://forum.xda-developers.com/showpost.php?p=10717996&postcount=603
Hi for all,
now I'm using a WP7 ROM called HD2O© v1.14. I have already installed a Hard SPL 2.08, Radio 2.15 and Magldr 1.13.
And I want to flash this prety looking ROM from imilka developer ...
Code:
http://forum.xda-developers.com/showthread.php?t=919148
Can I do that? Do I need something else? Or just boot to Maglfr, flash CWM and then ,,install zip from sd card,,. Please help me with this. Thanks a lot!
Yes.
Download this
Then read the instructions in your roms thread and then partition your sd card accordingly then flash rom.
THaltof said:
Hi for all,
now I'm using a WP7 ROM called HD2O© v1.14. I have already installed a Hard SPL 2.08, Radio 2.15 and Magldr 1.13.
And I want to flash this prety looking ROM from imilka developer ...
Code:
http://forum.xda-developers.com/showthread.php?t=919148
Can I do that? Do I need something else? Or just boot to Maglfr, flash CWM and then ,,install zip from sd card,,. Please help me with this. Thanks a lot!
Click to expand...
Click to collapse
Hi,
Firstly what LEO do you have(512 or 1024)
Backup your data before starting.
Get THIS TOOL
Set to Magldr repartition>Your size according to [OP]135M (or 150M) system partition layout for EU
350M system partition layout for TMOUS
Then repartition.
Go to ad recovery>wipe data,cache partition,dalvik(advanced).
Go to install zip from sd card,choose imilka's
reboot
enjoy
EDIT:
LOL SNAP
You got me. Both I don't know which version of HD2 I have How can I check it and what is the diference between 512 and 1024?
I'm from czech republic and I'm so sorry but I don't understand you. Both I need a video tutorial This could be a hope for me
EDIT: This ROM what I want is NAND so I don't need a cLK Partitioning right? And I have I think EU version so I don't need nothing. Just go to 5. USB Flasher in Magldr and flash CWM. Then just go to AD Recovery and flash MY ROM. Is this right or not?
UP
THaltof said:
You got me. Both I don't know which version of HD2 I have How can I check it and what is the diference between 512 and 1024?
I'm from czech republic and I'm so sorry but I don't understand you. Both I need a video tutorial This could be a hope for me
EDIT: This ROM what I want is NAND so I don't need a cLK Partitioning right? And I have I think EU version so I don't need nothing. Just go to 5. USB Flasher in Magldr and flash CWM. Then just go to AD Recovery and flash MY ROM. Is this right or not?
Click to expand...
Click to collapse
Hi,
try this
Thank you
THaltof said:
Thank you
Click to expand...
Click to collapse
Sorry,but I am not sure what you want...
I have a problem Please could anyonehelp me? I flashed CWM 1,3 with 150MB repartition and ther through CWM I flashed this ROM.
http://forum.xda-developers.com/showthread.php?t=919148
Everything goes well. But now when all is done, my phone don't want to boot up. Only HTC boot logo is showing Could you tell me why? What's wrong?
Anyone won't to helpme?
THaltof said:
Anyone won't to helpme?
Click to expand...
Click to collapse
Did you :
Go to ad recovery>wipe data,cache partition,dalvik(advanced) before you flashed rom?
Also maybe try cwm 135M.
Yes I did it. And I also tried CWM 400MB but the same issue. I don't understand this. I used this tutorial in my language
http://wmmania.cz/clanky/navody/jak-nahrat-android-do-htc-hd2/
THaltof said:
Yes I did it. And I also tried CWM 400MB but the same issue. I don't understand this. I used this tutorial in my language
http://wmmania.cz/clanky/navody/jak-nahrat-android-do-htc-hd2/
Click to expand...
Click to collapse
Ok,
Backup your sd card onto your pc.
You need to re-format your sd card using XP or G-Parted Live(google).
Go to recovery >advanced>partition sd card ...you want 1024M + 0 swap
Then try everything again.
Ok i will try this. And which CWM can I flash. 150MB or 400MB. I think that 150MB is enought.
THaltof said:
Ok i will try this. And which CWM can I flash. 150MB or 400MB. I think that 150MB is enought.
Click to expand...
Click to collapse
Start with 135M as stated in [OP]
I couldn't find this version I applied 150MB and now I'm in CWM and doing Partitioning SD Card... Now it's complete. Now I must add my ROM to sd card because I formated it. And then I will apply this ROM. We will see
....INSTALLING....
THaltof said:
I couldn't find this version I applied 150MB and now I'm in CWM and doing Partitioning SD Card... Now it's complete. Now I must add my ROM to sd card because I formated it. And then I will apply this ROM. We will see
Click to expand...
Click to collapse
Here you go.
Next problem. Now I see on screen only:
Unpacking SD-EXT files....
Now it takes about 3min. It isn't normal It's slashed
EDIT// Change Now flashing continues. Now It's done. REBOOT
EDIT 2//Next change. Now HTC quuetly briliant animation show's up. Still booting
It's working. But for first boot it's a too slow. It's normal?
THaltof said:
Next problem. Now I see on screen only:
Unpacking SD-EXT files....
Now it takes about 3min. It isn't normal It's slashed
EDIT// Change Now flashing continues. Now It's done. REBOOT
EDIT 2//Next change. Now HTC quuetly briliant animation show's up. Still booting
Click to expand...
Click to collapse
It can take 10-20 minutes
So I decided to flash Clockwork Mod Recovery I had version 3.0.1.9 and I wanted 3
.0.2.5 I went into ROM Manager and flashed to that version. But now when I go into AD Recovery it says ERROR: Invalid boot image header and goes back to MAGLDR. Can someone help me fix this and get the most recent version of Clockwork Mod on my HD2. Thanks! Kind of a newbie sorry!
error
i have had the same problem what is did went here and re download the ROM manager 3.025 or what you were using before the error once you do that is i should work again but you mite have to install your ROM again i had to but when you download and flash it with the daf file just make sure you find the one that was working before you flash it you don't what to get the same thing again hope that help if not let me know good luck
starblade18 said:
So I decided to flash Clockwork Mod Recovery I had version 3.0.1.9 and I wanted 3
.0.2.5 I went into ROM Manager and flashed to that version. But now when I go into AD Recovery it says ERROR: Invalid boot image header and goes back to MAGLDR. Can someone help me fix this and get the most recent version of Clockwork Mod on my HD2. Thanks! Kind of a newbie sorry!
Click to expand...
Click to collapse
rko2010 said:
i have had the same problem what is did went here and re download the ROM manager 3.025 or what you were using before the error once you do that is i should work again but you mite have to install your ROM again i had to but when you download and flash it with the daf file just make sure you find the one that was working before you flash it you don't what to get the same thing again hope that help if not let me know good luck
Click to expand...
Click to collapse
Hi,
ROM Manager ONLY works with cLK,NOT magldr.
Use THIS TOOL (Don't forget to thank him)
to re-install magldr
Magdlr is still installed, just Option 8 does not work. Will this reinstall MAGDLR and Clockwork Mod?
starblade18 said:
Magdlr is still installed, just Option 8 does not work. Will this reinstall MAGDLR and Clockwork Mod?
Click to expand...
Click to collapse
Hi,
To install CWM,use the installer...
Top line,magldr update recovery,choose the size of the partition you want for your new ROM and click update in bottom left hand corner.
It didn't work. Said no space left on the device
starblade18 said:
It didn't work. Said no space left on the device
Click to expand...
Click to collapse
Hi,
No memory left means the last version of recovery you installed was smaller than the current one. You need to completely repartition MAGLDR in order to install new version in that case.
Is there an average partition size and cache size? I need to choose?
starblade18 said:
Is there an average partition size and cache size? I need to choose?
Click to expand...
Click to collapse
Hi,
I think you should start the process again from the beginning.
Task 29
Install magldr
Install CWM by using the partition you want for your new ROM.So look at the [OP] of your new ROM, get the CWM partition and flash that.
Then you can go straight to installing the ROM.
Hello every one. im using hyperdroid cm7 rom, i just flashed it two weeks ago with the MAGLDR 1.13 and the clock work mod v1.3_150MB but now im having a problem with clock work mod recovery and that is when i try to load the clock work mod recovery it says "invalid image" something like that and it dosent load the clock work mod recovery and goes back to the MAGLDR1.13 menu so how i should deal with it should i re-flash the clock work mod 1.3_150mb recovery? and if i do this will i have any problem with the rom or will lose any thing? please help me and thanks in advance to all.....
Wow 40 views not a single reply i think i asked a wrong question....
I would reinstall CWM. Be sure to install the CWM recommended by the Rom's chef as they can be different partition size. You should not loose your data by reflashing CWM. I believe the partition you are looking for 150M. Here is a link: http://www.multiupload.com/41E9UMRO45
Yea re flashing cwm will wipe all the nand partitions because they are all re created empty. If you have been using an ext partition you can save the contents of that, I.e your installed apps, , and if the rom you were on put the whole data part there you can maybe save your data too, tho I suspect you will have to bite the bullet and start from scratch.
samsamuel said:
Yea re flashing cwm will wipe all the nand partitions because they are all re created empty. If you have been using an ext partition you can save the contents of that, I.e your installed apps, , and if the rom you were on put the whole data part there you can maybe save your data too, tho I suspect you will have to bite the bullet and start from scratch.
Click to expand...
Click to collapse
sam thx but my question i dont have an ext partition for the apps so if i re flash the 150 partition of cwm will i lose roms data and will i have to reinstall the rom again? and by doing this is there any chance bricking the hd2? what should i do please recomand.
michdj00 said:
I would reinstall CWM. Be sure to install the CWM recommended by the Rom's chef as they can be different partition size. You should not loose your data by reflashing CWM. I believe the partition you are looking for 150M. Here is a link.....
michdj ya i was recommended to use the 150 partition but im afraid to reflashing it what if i lose all the rom data and brick my hd2.....
Click to expand...
Click to collapse
I do not really understand your problem...
Why do you go into CWM if you already loaded the ROM and using it successfully?
What do you want to do??
To get to CWM, go to Magldr select option 5 I believe (Recovery) press GREEN (call) button and you'll get CWM menu.
Does that answer your question?
Recovery is option 8.
I assume the issue was created be cause you tried ROM Manager with MAGLDR, it will mess up your phone. (use ROM Manager only with cLK Bootloader)
thanks
Tester30 said:
I do not really understand your problem...
Why do you go into CWM if you already loaded the ROM and using it successfully?
What do you want to do??
To get to CWM, go to Magldr select option 5 I believe (Recovery) press GREEN (call) button and you'll get CWM menu.
Does that answer your question?
Click to expand...
Click to collapse
tester30 basically i needed to update a fix for the rom and it has to be done by loading into the cwm so when i got the fix from the rom thread i tried to load the cwm and i face the problem....
thanks
Marvlesz said:
Recovery is option 8.
I assume the issue was created be cause you tried ROM Manager with MAGLDR, it will mess up your phone. (use ROM Manager only with cLK Bootloader)
Click to expand...
Click to collapse
Marvlesz i think u r very right actually i did a the "fix permission" in the rom manager and also pressed "backup rom" in the rom manager menu.I did it because in the rom manager it sayas clearly that backup using clock work mode so i thought of doing that what should i do now please help me out
sandb said:
Marvlesz i think u r very right actually i did a the "fix permission" in the rom manager and also pressed "backup rom" in the rom manager menu.I did it because in the rom manager it sayas clearly that backup using clock work mode so i thought of doing that what should i do now please help me out
Click to expand...
Click to collapse
it would be better you flashed mgldr and cwm partition and install the rom again.
mutil said:
it would be better you flashed mgldr and cwm partition and install the rom again.
Click to expand...
Click to collapse
i guess i have to do it.thanks for the info multi.
hi
i'm new to android and to xda, my first experience was with NexusHD2-Gingerbread V3.3a native sd, i read about flash zip files from recovery to update the rom, i go to ad recovery and found nothing there, so i instal MAGLDR_CWM_Recovery_v3.2.0.0_for_NexusHD2_135M, and flash update as i want, but now i can't boot automaticly to nexus, its stop on maglder menu and load after choose boot adsd , any idea to make it boot normally ?
e_m_e2000 said:
hi
i'm new to android and to xda, my first experience was with NexusHD2-Gingerbread V3.3a native sd, i read about flash zip files from recovery to update the rom, i go to ad recovery and found nothing there, so i instal MAGLDR_CWM_Recovery_v3.2.0.0_for_NexusHD2_135M, and flash update as i want, but now i can't boot automaticly to nexus, its stop on maglder menu and load after choose boot adsd , any idea to make it boot normally ?
Click to expand...
Click to collapse
if i re install magldr it will replace the missing file or what ?
i need your advice please:
how can i avoid like this problem ?
use hd2 toolkit. repartition phone using it, it will automatically install recovery so you can use ad recovery in magldr.
search for hd2 toolkit
gilbert32 said:
use hd2 toolkit. repartition phone using it, it will automatically install recovery so you can use ad recovery in magldr.
search for hd2 toolkit
Click to expand...
Click to collapse
thanks for your reply gibert32
i already using hd2 tookit to wipe and flash magldr, but i don't partition my phone.
i install Rom using native SD, so i make two partition on my SD card, using (recovery_4EXT2.2.7_leo_sd) to do that.
but i install ( MAGLDR_CWM_Recovery_v3.2.0.0_for_NexusHD2_135M ) to update my Rom.
did you mean that if i install recovery i partition phone ?
for nand install: in hd2 toolkit, you just choose partition size for magldr, click repartition and toolkit will repartition AND install recovery.
another problem
gilbert32 said:
for nand install: in hd2 toolkit, you just choose partition size for magldr, click repartition and toolkit will repartition AND install recovery.
Click to expand...
Click to collapse
Dear gilbert
i use ( NexusHD2-Gingerbread V3.3a )native SD, it is so stable and fast Rom, but it can't read arabic language
it seems like that ( ا ل س ل ا م ع ل ي ك م )
it must be ( السلام عليكم )
Rom link :
https://sites.google.com/site/nexushd2android/nexushd2-gingerbread/v3-3
i try tytung add on : RTL_farsi_arabic_support_NexusHD2_V3.2a_ByTamer-signed.zip
i don't know if i install this Rom on nand and flash this add on solve my problem ?
but still have the same problem.
can you please help me to solve this problem
e_m_e2000 said:
Dear gilbert
i use ( NexusHD2-Gingerbread V3.3a )native SD, it is so stable and fast Rom, but it can't read arabic language
it seems like that ( ا ل س ل ا م ع ل ي ك م )
it must be ( السلام عليكم )
Rom link :
https://sites.google.com/site/nexushd2android/nexushd2-gingerbread/v3-3
i try tytung add on : RTL_farsi_arabic_support_NexusHD2_V3.2a_ByTamer-signed.zip
i don't know if i install this Rom on nand and flash this add on solve my problem ?
but still have the same problem.
can you please help me to solve this problem
Click to expand...
Click to collapse
i will upload the patch for nativeSD. just wait. modifying and testing... @e_m_e2000 EDIT: finished. i tested and it worked. please try it
you are the best
gilbert32 said:
i will upload the patch for nativeSD. just wait. modifying and testing... @e_m_e2000 EDIT: finished. i tested and it worked. please try it
Click to expand...
Click to collapse
Mr.gilbert thanks so much for your help, your patch works for me and now i can read Arabic will:laugh:
but i think i make somthing mistake, as my mobile can't boot automatically, it give me nand kernal open faild , its happen when i flash CWM_Recovery_v3.2.0.0_for_NexusHD2 .
i used 4EXT recovery to flash rom,when i need to flash any zip file for update ( your great patch ) i go to ad recovery but nothing there ?
my question now: how can i flash zip file while using native SD Rom ?
thanks again for your help
e_m_e2000 said:
Mr.gilbert thanks so much for your help, your patch works for me and now i can read Arabic will:laugh:
but i think i make somthing mistake, as my mobile can't boot automatically, it give me nand kernal open faild , its happen when i flash CWM_Recovery_v3.2.0.0_for_NexusHD2 .
i used 4EXT recovery to flash rom,when i need to flash any zip file for update ( your great patch ) i go to ad recovery but nothing there ?
my question now: how can i flash zip file while using native SD Rom ?
thanks again for your help
Click to expand...
Click to collapse
well, nand kernel open failed is because you don't have nand android. just in magldr find the setting to choose ad sd as default os. then reboot should work correctly.
you can't flash zips in roms. this is why they are flashed from recovery. if ad recovery shows nothing, then recovery is not correctly installed. partition your phone with hd2 toolkit and ad recovery should work.
btw, this is not "my" patch. it's the same patch tytung has in the rom's OP, but i only modded it to work on nativeSD. and the first time i tried it i accidently deleted the rom from my phone
gilbert32 said:
well, nand kernel open failed is because you don't have nand android. just in magldr find the setting to choose ad sd as default os. then reboot should work correctly.
you can't flash zips in roms. this is why they are flashed from recovery. if ad recovery shows nothing, then recovery is not correctly installed. partition your phone with hd2 toolkit and ad recovery should work.
btw, this is not "my" patch. it's the same patch tytung has in the rom's OP, but i only modded it to work on nativeSD. and the first time i tried it i accidently deleted the rom from my phone
Click to expand...
Click to collapse
thanks for your help
it means that when i flash ( MAGLDR_CWM_Recovery_v3.2.0.0_for_NexusHD2_135M ) to flash zip file i was right ?
is cwm recovery partition my phone automatically ?
sorry for my bad experience, why i partition my phone while running native SD ?
you don't need to just boot via sd in magldr the recovery (4ext) and flash nativeSD rom to nativeSD and boot rom from ad sd too. there's no need to partition your phone
gilbert32 said:
you don't need to just boot via sd in magldr the recovery (4ext) and flash nativeSD rom to nativeSD and boot rom from ad sd too. there's no need to partition your phone
Click to expand...
Click to collapse
Mr gilbert
i format my SD card and make 2 partition ( fat32 + EXT4) and copy 4EXT recovery to my SD, used took it to wipe - flash maglder and Rom, No problem at all, but when i try to flash zip file such as arabic patch, restart my phone - magldr menu - ad recovery ..... nothing load
where is the problem ?
@e_m_e2000 omg. just go to settings in magldr, set ad sd location to 4ext recovery. now boot ad sd. it will boot 4ext recovery. use THIS recovery to flash any zip to native sd, because you haven't partitionned your phone and DON"T have AD RECOVERY. so ad recovery will not work UNLESS you repartition using hd2 toolbox.
just boot 4ext with ad sd menu, flash the fix and reboot. in magldr re-set ad sd back to nativeSD folder to boot the rom.
each time you want to flash a zip, you must use 4ext recovery. ad recovery cannot work without partitionning
gilbert32 said:
@e_m_e2000 omg. just go to settings in magldr, set ad sd location to 4ext recovery. now boot ad sd. it will boot 4ext recovery. use THIS recovery to flash any zip to native sd, because you haven't partitionned your phone and DON"T have AD RECOVERY. so ad recovery will not work UNLESS you repartition using hd2 toolbox.
just boot 4ext with ad sd menu, flash the fix and reboot. in magldr re-set ad sd back to nativeSD folder to boot the rom.
each time you want to flash a zip, you must use 4ext recovery. ad recovery cannot work without partitionning
Click to expand...
Click to collapse
thank you very much, sorry for my bad experience
after i flash cwm i can flash any zip file, you advise me to leave that or re flash that Rom and follow your steps for flash Arabic patch
well you can install an android rom after repartitionning on your phone.
if you repartition, you will be able to use ad recovery instead of 4ext recovery on sd.
if you repartition, booting ad sd will boot your rom. no need to reflash it or the fix.
you can after repartitionning install this rom using dataonext, your apps and settings should be preserved, but you will need to reflash the ORIGINAL arabic patch, not the one i provided for nativeSD
gilbert32 said:
well you can install an android rom after repartitionning on your phone.
if you repartition, you will be able to use ad recovery instead of 4ext recovery on sd.
if you repartition, booting ad sd will boot your rom. no need to reflash it or the fix.
you can after repartitionning install this rom using dataonext, your apps and settings should be preserved, but you will need to reflash the ORIGINAL arabic patch, not the one i provided for nativeSD
Click to expand...
Click to collapse
thank you, Great man