Hi all
My I9505, has turned quite weird today... I tried flashing it with latest NEE firmware, but it failed:
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> aboot.mbn
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
And on the handset I get in red writing:
STAT: [224, 1440]
SW REV. CHECK FAIL : fused : 2 , Binary : 1
I can only flash it with:
I9505XXUAMDE_I9505OXXAMD8_NEE
When entering recovery I sometimes get:
"No command" instead of the windows where it sets CSC, sometimes it sets CSC normally
When I try to reset flash counter I get
could not find triangle and counter data
I have also tried flashing with PIT, but that didn't help either...
Any help??
Kind regards
Ratata82 said:
Hi all
My I9505, has turned quite weird today... I tried flashing it with latest NEE firmware, but it failed:
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> aboot.mbn
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
And on the handset I get in red writing:
STAT: [224, 1440]
SW REV. CHECK FAIL : fused : 2 , Binary : 1
I can only flash it with:
I9505XXUAMDE_I9505OXXAMD8_NEE
When entering recovery I sometimes get:
"No command" instead of the windows where it sets CSC, sometimes it sets CSC normally
When I try to reset flash counter I get
could not find triangle and counter data
I have also tried flashing with PIT, but that didn't help either...
Any help??
Kind regards
Click to expand...
Click to collapse
read this
Odin troubleshooting: If Odin accidentally gives you "fail" try the following:
- Repeat procedure.
- Make sure that all actions of Kies are disabled from task manager.
- Change usb port.
- Try another usb cable (make sure it is the original).
- Try another Odin version.
- Uninstall and re-install driver.
- Use pit file.
- Try another computer.
Click to expand...
Click to collapse
samersh72 said:
read this
Click to expand...
Click to collapse
I have already tried all the steps, many times... This is just driving me insane
Ratata82 said:
I have already tried all the steps, many times... This is just driving me insane
Click to expand...
Click to collapse
it is something to do with bootloader
read this http://teamuscellular.com/Forum/topic/4963-★☞-support-touchwizstock-deodexed-jflteuscr970vxuamf5-☜★/?p=77401 post #51
and this http://forum.xda-developers.com/showpost.php?p=43619724&postcount=479
samersh72 said:
it is something to do with bootloader
read this http://teamuscellular.com/Forum/topic/4963-★☞-support-touchwizstock-deodexed-jflteuscr970vxuamf5-☜★/?p=77401 post #51
and this http://forum.xda-developers.com/showpost.php?p=43619724&postcount=479
Click to expand...
Click to collapse
But then I should be able to upgrade it, it fails with every single rom except the oldest. But looks like you are right
Fixed:
The problem was infact the new KNOX secure bootloader. I just upgradet it to I9505XXUDMH8_I9505OXXDMHA_BTU, and that fixed it.
Hopefully we will soon see a bootloader downgrade for new KNOX security Samsung handsets, nothing is unbreakable
Best regards
Please Explain
Ratata82 said:
Fixed:
The problem was infact the new KNOX secure bootloader. I just upgradet it to I9505XXUDMH8_I9505OXXDMHA_BTU, and that fixed it.
Hopefully we will soon see a bootloader downgrade for new KNOX security Samsung handsets, nothing is unbreakable
Best regards
Click to expand...
Click to collapse
can you please explain, how did you fix it. I am facing the same problem :crying:
You can't downgrade which means flash a previous android version
So just flash the newest android version and you'll be ok
Related
Ive been desperately trying to return to stock to unroot my phone for 2 days to no avail.
Holding the power button takes me to the Samsung bootloop.
I used Odin 1.85 to flash a HOME.tar.md5 file getting this message:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
In download mode it says the following:
ODIN MODE
Product Name:GT-i19505
Current binary: Custom
System status: Custom
Knox Kernel lock: 0x0
Knox warranty void: 0x1
CSB-CONFIG-LSB: 0x30 (have no idea what this is)
Write protection: Enable
eMMC Burst mode: enabled
START [224, 1440]
Any ideas?
poninaine said:
Ive been desperately trying to return to stock to unroot my phone for 2 days to no avail.
Holding the power button takes me to the Samsung bootloop.
I used Odin 1.85 to flash a HOME.tar.md5 file getting this message:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
In download mode it says the following:
ODIN MODE
Product Name:GT-i19505
Current binary: Custom
System status: Custom
Knox Kernel lock: 0x0
Knox warranty void: 0x1
CSB-CONFIG-LSB: 0x30 (have no idea what this is)
Write protection: Enable
eMMC Burst mode: enabled
START [224, 1440]
Any ideas?
Click to expand...
Click to collapse
are you putting it in download mode
http://galaxys4root.com/galaxy-s4-tutorials/how-to-unroot-galaxy-s4-and-remove-root-completely/
jaythenut said:
are you putting it in download mode
http://galaxys4root.com/galaxy-s4-tutorials/how-to-unroot-galaxy-s4-and-remove-root-completely/
Click to expand...
Click to collapse
Yes, I specifically wrote down what it said on the top left side in download mode,too.
poninaine said:
Yes, I specifically wrote down what it said on the top left side in download mode,too.
Click to expand...
Click to collapse
Did you:
Use the cable that came with your device.
Use the usb ports in the back of your computer. Don't use a hub.
Try on a different computer.
Get firmware from sammobile.com
These are all things that you should check. Also, I've had Odin fail a number of times and the for whatever reason decide to work. It can be finicky.
jd1639 said:
Did you:
Use the cable that came with your device.
Use the usb ports in the back of your computer. Don't use a hub.
Try on a different computer.
Get firmware from sammobile.com
These are all things that you should check. Also, I've had Odin fail a number of times and the for whatever reason decide to work. It can be finicky.
Click to expand...
Click to collapse
I also found certain versions of Odin didn't work with some ROMS. When I tried using a 3.1x version of Odin to root my I9505G, it didn't setup properly, but using the 3.07 version did.
jd1639 said:
Did you:
Use the cable that came with your device.
Use the usb ports in the back of your computer. Don't use a hub.
Try on a different computer.
Get firmware from sammobile.com
These are all things that you should check. Also, I've had Odin fail a number of times and the for whatever reason decide to work. It can be finicky.
Click to expand...
Click to collapse
Yes I have tried all of those things. I also downloaded all the Odin versions and tried them. Unfortunately all of them failed. Is there any idea of what the failure in the original post means?
poninaine said:
Yes I have tried all of those things. I also downloaded all the Odin versions and tried them. Unfortunately all of them failed. Is there any idea of what the failure in the original post means?
Click to expand...
Click to collapse
In the last fail the box on the bottom left side said "Leave CS" what does this mean?
poninaine said:
Yes I have tried all of those things. I also downloaded all the Odin versions and tried them. Unfortunately all of them failed. Is there any idea of what the failure in the original post means?
Click to expand...
Click to collapse
Do you know what firmware you were on? And what country and carrier are you.
jd1639 said:
Do you know what firmware you were on? And what country and carrier are you.
Click to expand...
Click to collapse
You mean now or before the root? And my country is Estonia which has no stock .tar file anywhere on the internet. I read somewhere that you can just use a random countrys one and change the csc later so I decided to do that.
poninaine said:
You mean now or before the root? And my country is Estonia which has no stock .tar file anywhere on the internet. I read somewhere that you can just use a random countrys one and change the csc later so I decided to do that.
Click to expand...
Click to collapse
Yes, before root.
I even tried re-partition. Still failed instantly.
jd1639 said:
Yes, before root.
Click to expand...
Click to collapse
Before root I was on the stock Android 4.2.2. The first time I flashed anything it was the new leaked 4.3 which worked just fine.
Then I flashed CM 10.1 and it worked but the problems started when I wanted to get back to stock.
poninaine said:
I even tried re-partition. Still failed instantly.
Click to expand...
Click to collapse
I'm pretty sure it's the firmware version you're flashing that's the problem. If you know what it was before you rooted I'd look for the same version.
I have a similar problem
Hello there,
I have a similar problem but in odin it is a success but then i get stuck at boot.
To flash the file as a success, remove your device then flash again. By looking at your info, it says you have samsung knox which is a bummer (i'm in the same boat), you'll have to flash the same stock firmware as you did last time
Let me know how you get on mate
LimitedStreak said:
Hello there,
I have a similar problem but in odin it is a success but then i get stuck at boot.
To flash the file as a success, remove your device then flash again. By looking at your info, it says you have samsung knox which is a bummer (i'm in the same boat), you'll have to flash the same stock firmware as you did last time
Let me know how you get on mate
Click to expand...
Click to collapse
If Odin is successful but you get stuck at boot, do a factory reset in the stock recovery and it'll get you past the boot loop.
Would that delete my internal sd card folders etc?
---------- Post added at 10:12 PM ---------- Previous post was at 10:04 PM ----------
jd1639 said:
If Odin is successful but you get stuck at boot, do a factory reset in the stock recovery and it'll get you past the boot loop.
Click to expand...
Click to collapse
Would that delete my internal sd cards folders, prictures etc?
What if I flash another recovery then try wiping?
LimitedStreak said:
Hello there,
I have a similar problem but in odin it is a success but then i get stuck at boot.
To flash the file as a success, remove your device then flash again. By looking at your info, it says you have samsung knox which is a bummer (i'm in the same boat), you'll have to flash the same stock firmware as you did last time
Let me know how you get on mate
Click to expand...
Click to collapse
What do you mean I have Samsung Knox? I dont know how to find the same stock firmware as I dont know what I exactly need. As in if I need the exact same as it was when I bought it then I probably wont have no luck because my countrys csc firmware is nowhere for download.
I just realised - Im probably a huge idiot - I just checked the store site from where I bought my phone and it says the OS version is 4.2 not 4.2.2. Im going to try that but does every site only has 4.2.2!
Hello, I accidentally deleted my systems folder. I was trying to overwrite one file but apparently it deleted my entire system folder, now I cannot use recovery. If I try to go into recovery mode i get "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again."
I tried downloading Kies and updating it through that but I then get the error "the device's version cannot be updated." I have updated KIES to the newest firmware and still get the error.
I have tried adb pushing but my device is unrecognized and does not fully connect to my computer (Kies will just be stuck at "Connecting...")
I have tried installing a stock rom back with odin (ran as administrator), but odin gives me the error:
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
So it seems I have tried pretty much everything so far with no avail, may someone please help me? I am really stressed out and confused at all these errors.
titaniums4 said:
Hello, I accidentally deleted my systems folder. I was trying to overwrite one file but apparently it deleted my entire system folder, now I cannot use recovery. If I try to go into recovery mode i get "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again."
I tried downloading Kies and updating it through that but I then get the error "the device's version cannot be updated." I have updated KIES to the newest firmware and still get the error.
I have tried adb pushing but my device is unrecognized and does not fully connect to my computer (Kies will just be stuck at "Connecting...")
I have tried installing a stock rom back with odin (ran as administrator), but odin gives me the error:
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
So it seems I have tried pretty much everything so far with no avail, may someone please help me? I am really stressed out and confused at all these errors.
Click to expand...
Click to collapse
I managed to fix this! WOW was this such a headache!
after a long time researching, I found out the 4.4.2 update has some sort of updated bootloader that will not let you install older firmware. So I downloaded the 4.4.2 stock rom from www sammobile com
After you download that, i ran it with odin 1.09 and it installed.
My phone went into some weird loop where the samsung logo would come out for 1 second then my phone would vibrate every 2 seconds and not turn on... great another wall...
After more research i found out it could have been a power button issue, luckily it wasnt this, someone had mentioned that if you go into download mode and hold down the power button until your phone reboots you can get out of this "glitch". So this got me out of the glitch and my s4 started up normally!
Right now I am back to stock, I hope this helps out anyone who encounters something similar!
titaniums4 said:
Hello, I accidentally deleted my systems folder. I was trying to overwrite one file but apparently it deleted my entire system folder, now I cannot use recovery. If I try to go into recovery mode i get "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again."
I tried downloading Kies and updating it through that but I then get the error "the device's version cannot be updated." I have updated KIES to the newest firmware and still get the error.
I have tried adb pushing but my device is unrecognized and does not fully connect to my computer (Kies will just be stuck at "Connecting...")
I have tried installing a stock rom back with odin (ran as administrator), but odin gives me the error:
Initialzation..
Get PIT for mapping..
Firmware update start..
sbl2.mbn
NAND Write Start!!
sbl3.mbn
rpm.mbn
aboot.mbn
FAIL! (Auth)
All threads completed. (succeed 0 / failed 1)
So it seems I have tried pretty much everything so far with no avail, may someone please help me? I am really stressed out and confused at all these errors.
Click to expand...
Click to collapse
I think u should download new firmware from sammobile (because sometimes some firmware corrupted) and try different pc for reflash stock...
Sent from my GT-I9500 using XDA Premium 4 mobile app
fleming.patel said:
I think u should download new firmware from sammobile (because sometimes some firmware corrupted) and try different pc for reflash stock...
Sent from my GT-I9500 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
thanks for the reply, however i already fixed this!
titaniums4 said:
I managed to fix this! WOW was this such a headache!
after a long time researching, I found out the 4.4.2 update has some sort of updated bootloader that will not let you install older firmware. So I downloaded the 4.4.2 stock rom from www sammobile com
After you download that, i ran it with odin 1.09 and it installed.
My phone went into some weird loop where the samsung logo would come out for 1 second then my phone would vibrate every 2 seconds and not turn on... great another wall...
After more research i found out it could have been a power button issue, luckily it wasn't this, someone had mentioned that if you go into download mode and hold down the power button until your phone reboots you can get out of this "glitch". So this got me out of the glitch and my s4 started up normally!
Right now I am back to stock, I hope this helps out anyone who encounters something similar!
Click to expand...
Click to collapse
Hey I am also in a similar difficulty. > http://forum.xda-developers.com/galaxy-s4/help/help-firmware-upgrade-encountered-issue-t2821045
Basically read this above, and tell me what you think I should do. One thing I forgot to add is that when I try to flash a Official Firmware via ODIN, my S4 doesn't really do anything then ODIN would say FAILED, and it would have no affect on my S4 because it just stays on the firmware upgrade encountered an issue part.
Hi guys I'm having problems trying to root my note 3, in fact i can't flash anything with odin.
It is a n900w8 from Telcel, with 4.4.2 stock rom.
I tried flashing to root it and tried to flash a custom recovery and nothing.
this is what odin shows:
<ID:0/009> recovery.img
<ID:0/009> NAND Write Start!!
<ID:0/009> FAIL! (Auth)
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and in the phone it shows in red letters : Secure check fail : recovery
I already checked the reactivation lock, and it isn´t checked.
Do you have an idea of what could it be?
If you need another info pleas tell me, i would appreciate any help thanks
1. Reinstall the Samsung's drivers.
2. Try other USB cable/port.
3. Take a look if you are flashing the latest firmware for your device. Latest is: HERE.
Joku1981 said:
1. Reinstall the Samsung's drivers.
2. Try other USB cable/port.
3. Take a look if you are flashing the latest firmware for your device. Latest is: .
Click to expand...
Click to collapse
thanks for the answer but i didn´t work , I can flash that rom but only that. I tried to flash the root and the same error.
So i download my stock firmware off samsfirmware and tried to go back using odin but i always get Successful 0 Failed 1, can anyone help me please,?
LukeyyPalmerHD said:
So i download my stock firmware off samsfirmware and tried to go back using odin but i always get Successful 0 Failed 1, can anyone help me please,?
Click to expand...
Click to collapse
Hi mate ,
Please more info , what phone , what stock rom you had , what custom rom you had ( if so) , what stock rom are you trying to flash, what odin are you using , full odin log......
MAX 404 said:
Hi mate ,
Please more info , what phone , what stock rom you had , what custom rom you had ( if so) , what stock rom are you trying to flash, what odin are you using , full odin log......
Click to expand...
Click to collapse
Hi!
I have a Galaxy S4 i9505 - I bought the phone on a tesco contract so i am assuming the ROM would be the 02 one as they own tesco and i get the option between O2 PAY Monthly, 02 Pay As You GO and TESCO.
I'm trying to flash the 02 ROM (I9505XXUBMF8_I9505O2UBMG1_I9505XXUBMF8_HOME.tar)
I have tried using ODIN v1.85 and v3.09 but neither work
Log:
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl2.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> aboot.mbn
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
LukeyyPalmerHD said:
Hi!
I have a Galaxy S4 i9505 - I bought the phone on a tesco contract so i am assuming the ROM would be the 02 one as they own tesco and i get the option between O2 PAY Monthly, 02 Pay As You GO and TESCO.
I'm trying to flash the 02 ROM (I9505XXUBMF8_I9505O2UBMG1_I9505XXUBMF8_HOME.tar)
I have tried using ODIN v1.85 and v3.09 but neither work
Log:
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl2.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> aboot.mbn
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Hi mate ,
When i mention what stock rom i mean version number not from who ( carrier) aboot.mbn is the bootloader , if you try to flash a older bootloader than the one you have it will give you an error ( odin will not let you downgrade) , is that the latest stock rom for your phone/ carrier?
Just in case check that:
Odin troubleshooting: If Odin accidentally gives you "fail" try the following:
- Repeat procedure.
- Make sure that all actions of Kies are disabled from task manager.
- Change usb port.
- Try another usb cable (make sure it is the original).
- Try another Odin version.
- Uninstall and re-install driver.
- Use pit file.
- Try another computer.
http://forum.xda-developers.com/showthread.php?t=2265477
MAX 404 said:
Hi mate ,
When i mention what stock rom i mean version number not from who ( carrier) aboot.mbn is the bootloader , if you try to flash a older bootloader than the one you have it will give you an error ( odin will not let you downgrade) , is that the latest stock rom for your phone/ carrier?
Just in case check that:
Odin troubleshooting: If Odin accidentally gives you "fail" try the following:
- Repeat procedure.
- Make sure that all actions of Kies are disabled from task manager.
- Change usb port.
- Try another usb cable (make sure it is the original).
- Try another Odin version.
- Uninstall and re-install driver.
- Use pit file.
- Try another computer.
http://forum.xda-developers.com/showthread.php?t=2265477
Click to expand...
Click to collapse
I'm using the 4.2.2 ROM because im on 4.2.2, if i use 4.4.2 will it work?
LukeyyPalmerHD said:
I'm using the 4.2.2 ROM because im on 4.2.2, if i use 4.4.2 will it work?
Click to expand...
Click to collapse
Hi
You can use a stock 4.2.2 as long as you have a 4.2.2 bootloader that should be no problem , yes you can always upgrade (4.4.2)
MAX 404 said:
Hi
You can use a stock 4.2.2 as long as you have a 4.2.2 bootloader that should be no problem , yes you can always upgrade (4.4.2)
Click to expand...
Click to collapse
Hi, thanks for all the help, managed to fix it all and now im on lollipop
LukeyyPalmerHD said:
Hi, thanks for all the help, managed to fix it all and now im on lollipop
Click to expand...
Click to collapse
Great news mate!
Hello guys, I've tried to flash a CWM recovery on my SM-N9005 via Odin v3.07 and I always have a problem with that.. I run my phone in download mode, connect it to my laptop, and try to flash but this is the result in Odin log:
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
And result on my phone in download mode is:
Error: Secure Check Fail : aboot
I had the same problem when I try to root this phone with Odin, I dont know what to do with that and I'm thinking that you can help me
I know that my English is not very good but you have to understand that because I'm from Poland and I'm still learning it
When you are in Odin do you see that it actually shows that there's a successful connection? I mean look at the white status box at left hand side, does it say 'connected'?
ithehappy said:
When you are in Odin do you see that it actually shows that there's a successful connection? I mean look at the white status box at left hand side, does it say 'connected'?
Click to expand...
Click to collapse
Yes it is, maybe I should add thay I can Flash brand stock on that phone, I have that problem when I try to download any Type of recovery / root files and other like this.