Database Users

Really weird I9505

Hi all
My I9505, has turned quite weird today... I tried flashing it with latest NEE firmware, but it failed:
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> aboot.mbn
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
And on the handset I get in red writing:
STAT: [224, 1440]
SW REV. CHECK FAIL : fused : 2 , Binary : 1
I can only flash it with:
I9505XXUAMDE_I9505OXXAMD8_NEE
When entering recovery I sometimes get:
"No command" instead of the windows where it sets CSC, sometimes it sets CSC normally
When I try to reset flash counter I get
could not find triangle and counter data
I have also tried flashing with PIT, but that didn't help either...
Any help??
Kind regards

Ratata82 said:
Hi all
My I9505, has turned quite weird today... I tried flashing it with latest NEE firmware, but it failed:
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> aboot.mbn
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
And on the handset I get in red writing:
STAT: [224, 1440]
SW REV. CHECK FAIL : fused : 2 , Binary : 1
I can only flash it with:
I9505XXUAMDE_I9505OXXAMD8_NEE
When entering recovery I sometimes get:
"No command" instead of the windows where it sets CSC, sometimes it sets CSC normally
When I try to reset flash counter I get
could not find triangle and counter data
I have also tried flashing with PIT, but that didn't help either...
Any help??
Kind regards
Click to expand...
Click to collapse
read this
Odin troubleshooting: If Odin accidentally gives you "fail" try the following:
- Repeat procedure.
- Make sure that all actions of Kies are disabled from task manager.
- Change usb port.
- Try another usb cable (make sure it is the original).
- Try another Odin version.
- Uninstall and re-install driver.
- Use pit file.
- Try another computer.
Click to expand...
Click to collapse

samersh72 said:
read this
Click to expand...
Click to collapse
I have already tried all the steps, many times... This is just driving me insane

Ratata82 said:
I have already tried all the steps, many times... This is just driving me insane
Click to expand...
Click to collapse
it is something to do with bootloader
read this http://teamuscellular.com/Forum/topic/4963-★☞-support-touchwizstock-deodexed-jflteuscr970vxuamf5-☜★/?p=77401 post #51
and this http://forum.xda-developers.com/showpost.php?p=43619724&postcount=479

samersh72 said:
it is something to do with bootloader
read this http://teamuscellular.com/Forum/topic/4963-★☞-support-touchwizstock-deodexed-jflteuscr970vxuamf5-☜★/?p=77401 post #51
and this http://forum.xda-developers.com/showpost.php?p=43619724&postcount=479
Click to expand...
Click to collapse
But then I should be able to upgrade it, it fails with every single rom except the oldest. But looks like you are right

Fixed:
The problem was infact the new KNOX secure bootloader. I just upgradet it to I9505XXUDMH8_I9505OXXDMHA_BTU, and that fixed it.
Hopefully we will soon see a bootloader downgrade for new KNOX security Samsung handsets, nothing is unbreakable
Best regards

Please Explain
Ratata82 said:
Fixed:
The problem was infact the new KNOX secure bootloader. I just upgradet it to I9505XXUDMH8_I9505OXXDMHA_BTU, and that fixed it.
Hopefully we will soon see a bootloader downgrade for new KNOX security Samsung handsets, nothing is unbreakable
Best regards
Click to expand...
Click to collapse
can you please explain, how did you fix it. I am facing the same problem :crying:

You can't downgrade which means flash a previous android version
So just flash the newest android version and you'll be ok

Nand write started - fail

Hi, i have a big problem. Everytime when i flash something in odin i have FAIL.
Today i want to flash stock MGA. After a few seconds... fail.
Here log from odin 3.07:
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Removed!!
I can't go into recovery.
I can go into download mode.
I think i tried everything..
PLEASE HELP BECAUSE I NEED MY PHONE ON TOMMOROW.
sorry for my bad english

Any help ??

kapiszon53 said:
Any help ??
Click to expand...
Click to collapse
Odin troubleshooting: If Odin accidentally gives you "fail" try the following:
- Repeat procedure.
- Make sure that all actions of Kies are disabled from task manager.
- Change usb port.
- Try another usb cable (make sure it is the original).
- Try another Odin version.
- Uninstall and re-install driver.
- Try another computer.

After change computer everything works fine. THX

i've used a different PC, reinstalled the USB drivers and repeated the process many times but still it doesn't work
i've a GT-I9500

[Q] soft bricked!

hi all, a friend bringed to me his gt-9505 ( italian ), the phone was rooted and has a custom rom ( slimbean), yesterday he flash the new bootloader and modem with odin to flash the omega v24, than the flash failed in recovery ( twrp), the nand restore failed too! my skills on samsung modding are not high! after i read that the new bootloader doesn't allow the downgrade, so i try to flash the stock 4.4.2 on odin, it says:
ID:0/004> NAND Write Start!!
<ID:0/004> sbl2.mbn
<ID:0/004> __Xmit Write fail
<ID:0/004> XmitData Fail..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
any suggest? actually the phone is stuck on:
firmware upgrade encounterd an issue. please select recovery mode in kies and try again!
thank you in advance

uzzo85 said:
hi all, a friend bringed to me his gt-9505 ( italian ), the phone was rooted and has a custom rom ( slimbean), yesterday he flash the new bootloader and modem with odin to flash the omega v24, than the flash failed in recovery ( twrp), the nand restore failed too! my skills on samsung modding are not high! after i read that the new bootloader doesn't allow the downgrade, so i try to flash the stock 4.4.2 on odin, it says:
ID:0/004> NAND Write Start!!
<ID:0/004> sbl2.mbn
<ID:0/004> __Xmit Write fail
<ID:0/004> XmitData Fail..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
any suggest? actually the phone is stuck on:
firmware upgrade encounterd an issue. please select recovery mode in kies and try again!
thank you in advance
Click to expand...
Click to collapse
Hello there try a different Cable/Ports mate and then ,Pull your battery out and put it back and press and hold power+voludown in order to reach downloadmode and reflash the stock rom once again. make sure kies 3 is closed.

uzzo85 said:
hi all, a friend bringed to me his gt-9505 ( italian ), the phone was rooted and has a custom rom ( slimbean), yesterday he flash the new bootloader and modem with odin to flash the omega v24, than the flash failed in recovery ( twrp), the nand restore failed too! my skills on samsung modding are not high! after i read that the new bootloader doesn't allow the downgrade, so i try to flash the stock 4.4.2 on odin, it says:
ID:0/004> NAND Write Start!!
<ID:0/004> sbl2.mbn
<ID:0/004> __Xmit Write fail
<ID:0/004> XmitData Fail..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
any suggest? actually the phone is stuck on:
firmware upgrade encounterd an issue. please select recovery mode in kies and try again!
thank you in advance
Click to expand...
Click to collapse
This person fixed it: HERE

Repulsa said:
Hello there try a different Cable/Ports mate and then ,Pull your battery out and put it back and press and hold power+voludown in order to reach downloadmode and reflash the stock rom once again. make sure kies 3 is closed.
Click to expand...
Click to collapse
it works by changing usb ports! installed on odin latest stock 4.4.2 italian brand vodafone! thank you dude

uzzo85 said:
it works by changing usb ports! installed on odin latest stock 4.4.2 italian brand vodafone! thank you dude
Click to expand...
Click to collapse
Glad that help mate . have a nice day.

[Q] Flash ROM error

I'm trying to install GENNXT PREROOTED ROM FOR GRAND 2 V-1.3
but every time i got this error.
VIA ODIN:
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Also, on the phone screen it says
SECURE CHECK FAIL: sbl1
Then, i try install STOCK ROM clear and STOCK and works..
Does anyone have any idea of how to fix this? Any help would be greatly appreciated.

Check if you have selected the corresponding files correctly
THANKS IS NOT SOMETHING TO SAVE, IT'S SOMETHING TO GIVE OUT

mobihack said:
Check if you have selected the corresponding files correctly
THANKS IS NOT SOMETHING TO SAVE, IT'S SOMETHING TO GIVE OUT
Click to expand...
Click to collapse
Yes, I've checked correct file, and re-downloaded tree times keep issue.
Btw, Thx for reply bro

3 times
Can you compress it for me using kgb man and wait I will check for help
EDIT:
So I checked on my buddy google. Many s4 users face this problem. This is because they have knox enabled boot loader. So they couldn't downgrade firmware. I think that's the problem with us too.
Gennxt rom is based on C3 but most phones now have D1 or E1
Source: http://forum.xda-developers.com/showthread.php?t=2641393

Note 4 problems

Hello all.
I'm having multiple problems with my Note 4.
Model is SM-N910F and the problems are:
Does not boot to OS
OS Flash works but does not do final stuff on the phone
When installing OS, it will just spit out failed to mount /efc (Invalid argument)
Tried Kies recovery, that fails too
Custom recovery does not work.
Is it safe to say that this device is officially dead and i should get a new phone?

JantsoP said:
Hello all.
I'm having multiple problems with my Note 4.
Model is SM-N910F and the problems are:
Does not boot to OS
OS Flash works but does not do final stuff on the phone
When installing OS, it will just spit out failed to mount /efc (Invalid argument)
Tried Kies recovery, that fails too
Custom recovery does not work.
Is it safe to say that this device is officially dead and i should get a new phone?
Click to expand...
Click to collapse
Flash 4files repair firmware with PIT file then do factory reset.
Get from link below
https://www.androidfilehost.com/?fid=24407100847294341
Extract thr file you will get 5 files ( BL/AP/CP/CSC/PIT
)
UPLOAD ALL FILES IN ODIN CORRECTLY AND GO TO ODIN OPTIONS CHECK "NAND ERASEALL".
HIT START
ONCE ODIN SHOWS PASS GO TO STOCK RECOVERY MAKE FACTORY RESET THEN REBOOT.
If this does not work then your eMMc chip need to replace from motherboard.
Hope this will help.

Trex888 said:
Flash 4files repair firmware with PIT file then do factory reset.
Get from link below
https://www.androidfilehost.com/?fid=24407100847294341
Extract thr file you will get 5 files ( BL/AP/CP/CSC/PIT
)
UPLOAD ALL FILES IN ODIN CORRECTLY AND GO TO ODIN OPTIONS CHECK "NAND ERASEALL".
HIT START
ONCE ODIN SHOWS PASS GO TO STOCK RECOVERY MAKE FACTORY RESET THEN REBOOT.
If this does not work then your eMMc chip need to replace from motherboard.
Hope this will help.
Click to expand...
Click to collapse
Hey Trex888.
ODIN fails with this message:
Code:
<ID:0/003> Receive Response from boot-loader
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> FAIL! (Write)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
So the eMMc chip is dead and needs to be replaced?

JantsoP said:
Hey Trex888.
ODIN fails with this message:
Code:
<ID:0/003> Receive Response from boot-loader
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> FAIL! (Write)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
So the eMMc chip is dead and needs to be replaced?
Click to expand...
Click to collapse
Try odin version 3.10.
Try restart your pc.
Make sure all files inserted correctly in odin.
Try different usb cable.
Do a factory reset from recovery before start flashing.

Trex888 said:
Try odin version 3.10.
Try restart your pc.
Make sure all files inserted correctly in odin.
Try different usb cable.
Do a factory reset from recovery before start flashing.
Click to expand...
Click to collapse
Did all that and no joy. Anything else i could try or should i just give up and get a new one?

JantsoP said:
Did all that and no joy. Anything else i could try or should i just give up and get a new one?
Click to expand...
Click to collapse
This method sounds weird but give it a try not kidding i am serious
Put your phone in a plastic airpack bag in freezer without battery for 2 or 3 hours or better if whole night then take out immediately go to download mode and flash stock firmware.
Dozens of note 4 users ware able to recover by this crazy method You can read more about this down below.
https://forum.xda-developers.com/note-4/snapdragon-dev/note-4-debrick-img-t3488114

Trex888 said:
This method sounds weird but give it a try not kidding i am serious
Put your phone in a plastic airpack bag in freezer without battery for 2 or 3 hours or better if whole night then take out immediately go to download mode and flash stock firmware.
Dozens of note 4 users ware able to recover by this crazy method You can read more about this down below.
https://forum.xda-developers.com/note-4/snapdragon-dev/note-4-debrick-img-t3488114
Click to expand...
Click to collapse
Now that sounds weird
Will try it