Is there a way to root my cell with above firmware installed. Have not seen a way with this version or I missed it. Thanks Guys.
ROOTED mk2 but recovery through goomanager failed.
tailgunner9 said:
Is there a way to root my cell with above firmware installed. Have not seen a way with this version or I missed it. Thanks Guys.
Click to expand...
Click to collapse
Upgraded to 4.3. Its showed the MK2 band version. Then successfully rooted.
Later ran GOOMANAGER recovery app which crashed the whole thing to error message saying.
system software unauthorised by AT&T found. Ran the Kies later.
The status shows as "firmware upgrade encountered an issue, Please select recovery mode in Kies and try again.
Tried in Kies emergency recovery again and it fails and says. contact samsung customer service.
Tried Odin with Stock MDL but fails as below.
Odin message says :
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
pLS.hELP. The knox fuse says : knox warranty void 0x1
Appreciate all help.
tailgunner9 said:
Is there a way to root my cell with above firmware installed. Have not seen a way with this version or I missed it. Thanks Guys.
Click to expand...
Click to collapse
Just use Saferoot: http://www.droidviews.com/root-verizon-galaxy-s4-sch-i545-on-android-4-3-vruemk2/
sweetpoi098 said:
Upgraded to 4.3. Its showed the MK2 band version. Then successfully rooted.
Later ran GOOMANAGER recovery app which crashed the whole thing to error message saying.
system software unauthorised by AT&T found. Ran the Kies later.
The status shows as "firmware upgrade encountered an issue, Please select recovery mode in Kies and try again.
Tried in Kies emergency recovery again and it fails and says. contact samsung customer service.
Tried Odin with Stock MDL but fails as below.
Odin message says :
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
pLS.hELP. The knox fuse says : knox warranty void 0x1
Appreciate all help.
Click to expand...
Click to collapse
You can't have custom recovery on our phone past MDL. Using goomanager set your knox flag, and you can't change that back as of yet. You also can't ODIN back to any previous version. You need to read more before trying anything else because all this information is around here. You have to follow the MJ6-MJ9 instructions to recover that has been linked many times in help threads and others.
I am sure I am not the only one that had this issue but I am on this firmware but could not get motochopper to work. finally ran SafeRoot in Admin mode and it worked. So stoked now. Cant wait to flash Gummy ROM!
Greybush31 said:
I am sure I am not the only one that had this issue but I am on this firmware but could not get motochopper to work. finally ran SafeRoot in Admin mode and it worked. So stoked now. Cant wait to flash Gummy ROM!
Click to expand...
Click to collapse
Motochopper has been confirmed not working on any firmware past MDL. You can't run Gummy. The loki exploit to let us run custom kernels was patched. Do more reading before you brick again, and check out the General section for a nice list of what you can do on MK2/with Safestrap.
Thanks. That's what I have been doing. I am just tired of touchwiz. I like the raw android better, like my Nexus 10.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
Greybush31 said:
Thanks. That's what I have been doing. I am just tired of touchwiz. I like the raw android better, like my Nexus 10.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
Click to expand...
Click to collapse
If you want something that looks more like AOSP (raw android) then you can flash version 3.6 of Foxhound ROM from the international S4. I'm running it on stock and it's very nice. I chose the essential option in the AROMA installer but the full install might work also.
Hi all, im desperate for help here!!
I flashed Dr Ketans Rom to my Note 4 a couple of days ago but decided to try to go back to stock today due to a bug with my email. Anyway, a long story short, my phone failed the flashing process with odin whilst trying to flas the latest stock firmware from sammobile and then my phone refused to start up again.
I now get a screen telling me the firmware up grade process went wrong but I cant even reboot into recovery to install anything else.
I have tried flashing both TWRP and Philz recovery but both just flash the title screen on and off but never load up.
I have tried 2 firmware versions from sammobile and both end in fail, it seems like I cant flash any firmwares with odin which is a right pain because I cant get to recovery to install a zip file....
Please help, Im sooooo stuck!
Edit - this is the log from Odin if it helps anyone... Ive now tried software 4.4.4 also but nothing works.
<ID:0/003> Odin engine v(ID:3.1101)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> __XmitData_Write
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I downgraded from that ROM (I'm guessing it was the S7 Edge ROM) to KK 4.4.4 a few days ago.
I think your problem is, that you haven't reinstalled the correct Bootloader and Modem files before you went back to KK.
I used the ones found here http://forum.xda-developers.com/note-4/general/downgrade-official-mm-to-kitkat-t3383885
And everything worked.
What I did was, download the files and download the 4.4.4. firmware from SamMobile (the one I used is this (a BTU link, which is for the UK):
Code:
http://www.sammobile.com/firmwares/download/39930/N910FXXU1ANK4_N910FBTU1ANK2_BTU/
Direct link: http://dl.sammobile.com/OlFYQy8rLD1ULys8RzcnTUVYLzE9JkUpKyVXKDE8PFoOARlJUyA5RStXVEc1UlNHTVFaQ1NJEgkJHQBNSVpeQEZRXUM./N910FXXU1ANK4_N910FBTU1ANK2_BTU.zip
Then wipe your current setup in TWRP.
Reboot the download mode.
Install the Bootloader and Modem files in Odin.
Install the KK firmware in Odin.
Reboot and install TWRP in Odin.
Then either restore a previous KK backup or start from a clean slate.
0-0-0 said:
I downgraded from that ROM (I'm guessing it was the S7 Edge ROM) to KK 4.4.4 a few days ago.
I think your problem is, that you haven't reinstalled the correct Bootloader and Modem files before you went back to KK.
I used the ones found here http://forum.xda-developers.com/note-4/general/downgrade-official-mm-to-kitkat-t3383885
And everything worked.
What I did was, download the files and download the 4.4.4. firmware from SamMobile (the one I used is this (a BTU link, which is for the UK):
Code:
http://www.sammobile.com/firmwares/download/39930/N910FXXU1ANK4_N910FBTU1ANK2_BTU/
Direct link: http://dl.sammobile.com/OlFYQy8rLD1ULys8RzcnTUVYLzE9JkUpKyVXKDE8PFoOARlJUyA5RStXVEc1UlNHTVFaQ1NJEgkJHQBNSVpeQEZRXUM./N910FXXU1ANK4_N910FBTU1ANK2_BTU.zip
Then wipe your current setup in TWRP.
Reboot the download mode.
Install the Bootloader and Modem files in Odin.
Install the KK firmware in Odin.
Reboot and install TWRP in Odin.
Then either restore a previous KK backup or start from a clean slate.
Click to expand...
Click to collapse
Thanks very much for your reply!
My problem now is that I cant reboot into any recovery (it sends the phone into a bootloop) and now Odin doesn't recognise my phone. Ive tried 2 versions of Odin and 3 cables all with no luck, strange as it used to connect fine.
sudburys said:
Thanks very much for your reply!
My problem now is that I cant reboot into any recovery (it sends the phone into a bootloop) and now Odin doesn't recognise my phone. Ive tried 2 versions of Odin and 3 cables all with no luck, strange as it used to connect fine.
Click to expand...
Click to collapse
No problem, at least it bumped your thread.
I'm sorry, I don't know the answer to your questions.
All I can suggest is taking it to a phone shop/service centre to have it reset. I appreciate that isn't always possible.
Hopefully, someone will help.
0-0-0 said:
No problem, at least it bumped your thread.
I'm sorry, I don't know the answer to your questions.
All I can suggest is taking it to a phone shop/service centre to have it reset. I appreciate that isn't always possible.
Hopefully, someone will help.
Click to expand...
Click to collapse
No probs...
Thanks for the try anyway
Hi,
I need some assistance. I have an S4 (SC-04E) and it has TWRP custom recovery loaded in it. My colleague accidentally clicked wipe system from TWRP and it wasn't able to boot at all. So I thought I'd flash the stock firmware in order to resolve the problem. However, when I flash stock firmware on ODIN, it fails and gives me an error:
<ID:0/012> Initialzation..
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> aboot.mbn
<ID:0/012> NAND Write Start!!
<ID:0/012> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
How do I resolve this? The original firmware was 5.0.1 and I tried flashing both 4.4.4 as well as 5.0.1, but both have failed. I googled the error and I was unable to get relevant results. I downloaded the stock firmware from sammobile. Any idea what I can do for this issue?
Your phone doesn't boot because your friend wiped the Operating System from it. The recovery should boot and flashing any custom ROM through it should make it work again.
Regarding your Odin problem, make sure you have done the following:
Used a different USB cable
Used a different USB port
Used a different Odin version
Tried another Windows
Tried a completely different PC.
All of the above can affect the outcome of flashing with Odin.
Hello every one, i am here to ask help for a special case, if is there someone with the knowlege in XDA to help mein this, i got a friend who has his s7 edge from at&t one day not working anymore it got stuck in boot loop, he never try to root or nothing he is a normal simple phone user. so now i am trying to help him but i dont know which firmware the phone had, i cant put developer options , the usb debugging nothing etc, i try to start in recovery mode but it get stuck in blue letters that say recover booting and never boot into recovery, the only thing the phone do now is get into download mode, and the pc recognize it and odin too, i have read every single thread i think to flash every single stock rom available and none has work i try diferent pc´s, cables, usb port, odin version etc. the most common error i got all times by odin was this one
ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i am noob in this things i barely know a little readding all the threads i have put so much effort on this without success ,
can someone guide me please i will apreciate it
Darkboss10 said:
Hello every one, i am here to ask help for a special case, if is there someone with the knowlege in XDA to help mein this, i got a friend who has his s7 edge from at&t one day not working anymore it got stuck in boot loop, he never try to root or nothing he is a normal simple phone user. so now i am trying to help him but i dont know which firmware the phone had, i cant put developer options , the usb debugging nothing etc, i try to start in recovery mode but it get stuck in blue letters that say recover booting and never boot into recovery, the only thing the phone do now is get into download mode, and the pc recognize it and odin too, i have read every single thread i think to flash every single stock rom available and none has work i try diferent pc´s, cables, usb port, odin version etc. the most common error i got all times by odin was this one
ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i am noob in this things i barely know a little readding all the threads i have put so much effort on this without success ,
can someone guide me please i will apreciate it
Click to expand...
Click to collapse
Remove PIT file and try again.
From Edge of Galaxy Seven
Darkboss10 said:
Hello every one, i am here to ask help for a special case, if is there someone with the knowlege in XDA to help mein this, i got a friend who has his s7 edge from at&t one day not working anymore it got stuck in boot loop, he never try to root or nothing he is a normal simple phone user. so now i am trying to help him but i dont know which firmware the phone had, i cant put developer options , the usb debugging nothing etc, i try to start in recovery mode but it get stuck in blue letters that say recover booting and never boot into recovery, the only thing the phone do now is get into download mode, and the pc recognize it and odin too, i have read every single thread i think to flash every single stock rom available and none has work i try diferent pc´s, cables, usb port, odin version etc. the most common error i got all times by odin was this one
ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i am noob in this things i barely know a little readding all the threads i have put so much effort on this without success ,
can someone guide me please i will apreciate it
Click to expand...
Click to collapse
Not knowing WHAT you are flashing, makes it a little harder to determine what is going wrong.
Go HERE and flash this in Download Mode. This is the latest Stock 935A ROM, This will wipe Everything on the device, and it'll be like it came brand new
norbarb said:
Remove PIT file and try again.
From Edge of Galaxy Seven
Click to expand...
Click to collapse
which is the pit file, sorry for dumb question
Darkboss10 said:
which is the pit file, sorry for dumb question
Click to expand...
Click to collapse
If I remember correctly you need to uncheck PIT in odin and this should help. BTW. What are you trying to flash?
From Edge of Galaxy Seven
I have try the stock rom version 935a...pf2 . And any other stock rom i have found for the 935a seeing which will work .
Darkboss10 said:
I have try the stock rom version 935a...pf2 . And any other stock rom i have found for the 935a seeing which will work .
Click to expand...
Click to collapse
If you are currently on a ROM that has v4 boot loader's, part of your problem may be that you are trying to flash a rom with v2, v3 bootloaders
Sent from my SM-G935T using XDA-Developers Legacy app
so i do better go with the v4 bootloader and i will check if the pit file is uncheck, what should i put on the re-partition case of odin active or inactive?
by the way thanks for your help
kangi26 said:
If you are currently on a ROM that has v4 boot loader's, part of your problem may be that you are trying to flash a rom with v2, v3 bootloaders
Sent from my SM-G935T using XDA-Developers Legacy app
Click to expand...
Click to collapse
hey i did exactly as you told me , and for first time i guess i have an advance, i still get an error but at least a new error , check it out maybe you know what it is
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> emmc_appsboot.mbn
<ID:0/005> lksecapp.mbn
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
any idea what can be?
i try to flash the G935a...PI2 rom bot without the CSC which i guess is the pit file right?
When you try to get the device into Recovery, it will appear like it isn't doing it or looks like an "No Command" error and it can take a couple of min to actually get into Recovery.
I would boot into Recovery again, let it sit for a few min. My bet is that it will eventually get into Recovery. Once it does, do a Factory reset, and then reboot into Download Mode, open Odin connect the device to your PC and install all 4 of the items from the Stock ROM thread, don't mess with any of the settings in Odin, just populate the slots with the BL, AP, CP and CSC
kangi26 said:
When you try to get the device into Recovery, it will appear like it isn't doing it or looks like an "No Command" error and it can take a couple of min to actually get into Recovery.
I would boot into Recovery again, let it sit for a few min. My bet is that it will eventually get into Recovery. Once it does, do a Factory reset, and then reboot into Download Mode, open Odin connect the device to your PC and install all 4 of the items from the Stock ROM thread, don't mess with any of the settings in Odin, just populate the slots with the BL, AP, CP and CSC
Click to expand...
Click to collapse
This is what i get . But it doesnt enter recovery at the end. It just shut off ....
Darkboss10 said:
This is what i get . But it doesnt enter recovery at the end. It just shut off ....
Click to expand...
Click to collapse
Looks like the device is just rebooting
Sent from my SM-G935T using XDA-Developers Legacy app
kangi26 said:
Looks like the device is just rebooting
Sent from my SM-G935T using XDA-Developers Legacy app
Click to expand...
Click to collapse
if you watch the top corner blue letters it says recovery booting....
Darkboss10 said:
if you watch the top corner blue letters it says recovery booting....
Click to expand...
Click to collapse
I'm at a loss man, I'm sorry. I haven't seen that before, I dont get the "Samsung" part when I enter Recovery
Darkboss10 said:
if you watch the top corner blue letters it says recovery booting....
Click to expand...
Click to collapse
Can you post screen from download mode?
From Edge of Galaxy Seven
norbarb said:
Can you post screen from download mode?
From Edge of Galaxy Seven
Click to expand...
Click to collapse
There you go . By the way i should mention the phone only turns on download mode when plugged.
Darkboss10 said:
There you go . By the way i should mention the phone only turns on download mode when plugged.
Click to expand...
Click to collapse
OK you got bootloader v2. Try to flash some older version of MM in download mode using odin
Like from here: http://forum.xda-developers.com/showthread.php?p=67601581
From Edge of Galaxy Seven
You need to start by using the latest Odin, 3.12.3 for installing the original ROM. If you try to unlock, you need to go get the PrinceComsy version. PrinceComsy won't work for in-bricking a device, and if you have any of the stock versions of the ROM, you need the 3.12.3 version.
norbarb said:
OK you got bootloader v2. Try to flash some older version of MM in download mode using odin
Like from here: http://forum.xda-developers.com/showthread.php?p=67601581
From Edge of Galaxy Seven
Click to expand...
Click to collapse
I try that . Now i got this error but only on the phone screen and odin is stuck at initialization .. any idea what could be
i download the venom stock rom and the odin file he suggest but that odin is v 3.11.2 , so that was the one that trows me the odin protocol error, i try the same rom but with the v 3.12.3 odin , and it start working but it says fail at the on the recovery image, do that has to do something with my problem that the phone can boot into recovery mode?
here are the logs
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> FAIL! (Erase)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
Hello everyone,
I'm following this forum for mounths but just had chance to register.
I tried to root my phone, then I think something went wrong. Turned on the phone and used for a while, but had a fingerprint sensor error. After that I reboot the phone, but while showing the Samsung logo, I got "only official released binaries are allowed to be flashed" top of the screen. And phone was automaticly turning off after that.
Then I put the phone download mode and tried to install official firmware. Odin was failed.
I tried to flash bootloader only, and fail neither.
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> cm.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I thought maybe the stock rom that I trying to install is older. But now I can't open the TWRP with the buttons for the wipe data. The Samsung Galaxy logo views, after that it turns off.
Trying to install twrp again, Odin gives me fail too. Now I can only open the download mode.
I need my phone today urgently for contact with my colleagues.
Please ask me for the missing informations and please help me ASAP.. Sorry for my bad and complicated English..
Try to flash an earlier Version of the bootloader maybe QF7.
I found the flashable odin archive at https://mega.nz/#!5Q4TATzQ!DT2OQO01KHfw7HsVNElZSfZ4DHoO9W99k3dJqfumMhg for s8 and at https://mega.nz/#!dMZ0zbDL!oYrcBh8DeOqMFeO9QObu8eNXVrjsajXICJ0o3MJPJ-o for s8+.
I also find a video for this issue at https://youtu.be/VTi3uBkpJic
Try this and reply back..
- ————————————
Or just try to flash the stock rom without the cm.bin/ bl firm.
memreb1801 said:
Try to flash an earlier Version of the bootloader maybe QF7.
I found the flashable odin archive at for s8+.
I also find a video for this issue at
Try this and reply back..
Click to expand...
Click to collapse
Thank you for helping but I tried these solutions allready. Now downloading another country's official rom from sammobile. I'm going to try this one but I have no hope
Good luck!!??
My solution did work. Download the latest firmware and install it with Odin. Thanks everyone anyway..