SM-N9005 recovery/root problems - Galaxy Note 3 Q&A, Help & Troubleshooting

Hello guys, I've tried to flash a CWM recovery on my SM-N9005 via Odin v3.07 and I always have a problem with that.. I run my phone in download mode, connect it to my laptop, and try to flash but this is the result in Odin log:
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
And result on my phone in download mode is:
Error: Secure Check Fail : aboot
I had the same problem when I try to root this phone with Odin, I dont know what to do with that and I'm thinking that you can help me
I know that my English is not very good but you have to understand that because I'm from Poland and I'm still learning it

When you are in Odin do you see that it actually shows that there's a successful connection? I mean look at the white status box at left hand side, does it say 'connected'?

ithehappy said:
When you are in Odin do you see that it actually shows that there's a successful connection? I mean look at the white status box at left hand side, does it say 'connected'?
Click to expand...
Click to collapse
Yes it is, maybe I should add thay I can Flash brand stock on that phone, I have that problem when I try to download any Type of recovery / root files and other like this.

Related

Really weird I9505

Hi all
My I9505, has turned quite weird today... I tried flashing it with latest NEE firmware, but it failed:
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> aboot.mbn
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
And on the handset I get in red writing:
STAT: [224, 1440]
SW REV. CHECK FAIL : fused : 2 , Binary : 1
I can only flash it with:
I9505XXUAMDE_I9505OXXAMD8_NEE
When entering recovery I sometimes get:
"No command" instead of the windows where it sets CSC, sometimes it sets CSC normally
When I try to reset flash counter I get
could not find triangle and counter data
I have also tried flashing with PIT, but that didn't help either...
Any help??
Kind regards
Ratata82 said:
Hi all
My I9505, has turned quite weird today... I tried flashing it with latest NEE firmware, but it failed:
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> aboot.mbn
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
And on the handset I get in red writing:
STAT: [224, 1440]
SW REV. CHECK FAIL : fused : 2 , Binary : 1
I can only flash it with:
I9505XXUAMDE_I9505OXXAMD8_NEE
When entering recovery I sometimes get:
"No command" instead of the windows where it sets CSC, sometimes it sets CSC normally
When I try to reset flash counter I get
could not find triangle and counter data
I have also tried flashing with PIT, but that didn't help either...
Any help??
Kind regards
Click to expand...
Click to collapse
read this
Odin troubleshooting: If Odin accidentally gives you "fail" try the following:
- Repeat procedure.
- Make sure that all actions of Kies are disabled from task manager.
- Change usb port.
- Try another usb cable (make sure it is the original).
- Try another Odin version.
- Uninstall and re-install driver.
- Use pit file.
- Try another computer.
Click to expand...
Click to collapse
samersh72 said:
read this
Click to expand...
Click to collapse
I have already tried all the steps, many times... This is just driving me insane
Ratata82 said:
I have already tried all the steps, many times... This is just driving me insane
Click to expand...
Click to collapse
it is something to do with bootloader
read this http://teamuscellular.com/Forum/topic/4963-★☞-support-touchwizstock-deodexed-jflteuscr970vxuamf5-☜★/?p=77401 post #51
and this http://forum.xda-developers.com/showpost.php?p=43619724&postcount=479
samersh72 said:
it is something to do with bootloader
read this http://teamuscellular.com/Forum/topic/4963-★☞-support-touchwizstock-deodexed-jflteuscr970vxuamf5-☜★/?p=77401 post #51
and this http://forum.xda-developers.com/showpost.php?p=43619724&postcount=479
Click to expand...
Click to collapse
But then I should be able to upgrade it, it fails with every single rom except the oldest. But looks like you are right
Fixed:
The problem was infact the new KNOX secure bootloader. I just upgradet it to I9505XXUDMH8_I9505OXXDMHA_BTU, and that fixed it.
Hopefully we will soon see a bootloader downgrade for new KNOX security Samsung handsets, nothing is unbreakable
Best regards
Please Explain
Ratata82 said:
Fixed:
The problem was infact the new KNOX secure bootloader. I just upgradet it to I9505XXUDMH8_I9505OXXDMHA_BTU, and that fixed it.
Hopefully we will soon see a bootloader downgrade for new KNOX security Samsung handsets, nothing is unbreakable
Best regards
Click to expand...
Click to collapse
can you please explain, how did you fix it. I am facing the same problem :crying:
You can't downgrade which means flash a previous android version
So just flash the newest android version and you'll be ok

[Q] Flashing via ODIN (9506)

Hello, i have searched the forums for a flashable firmware upgrade from 4.2.2 to 4.3 for my sgs4 (i9506) and can't find it anywhere, could someone please locate me to the correct directions or atleast tell me something working? Thanks
mattish.91 said:
Hello, i have searched the forums for a flashable firmware upgrade from 4.2.2 to 4.3 for my sgs4 (i9506) and can't find it anywhere, could someone please locate me to the correct directions or atleast tell me something working? Thanks
Click to expand...
Click to collapse
Check sammobile.com then firmware for ur phone. Have a nice day
Sent from my Phone.
Edit: or here http://www.sammobile.com/firmwares/2/
Repulsa said:
Check sammobile.com then firmware for ur phone. Have a nice day
Sent from my Phone.
Click to expand...
Click to collapse
I just flashed the "I9506XXUBML5_I9506FTMBML1_I9506XXUBMK7_HOME.tar.md5" and i get "failed" and now i can't acces my phone, only download mode... please help
mattish.91 said:
I just flashed the "I9506XXUBML5_I9506FTMBML1_I9506XXUBMK7_HOME.tar.md5" and i get "failed" and now i can't acces my phone, only download mode... please help
Click to expand...
Click to collapse
Download odin 3.09 then select PDA, and find the file you download now connect the one cable to your PC and press power+volume down to your phone until u reach download mode and connect the other cable to your phone and click start.
Edit: Dont root your device you might Void your warranty after updating.
mattish.91 said:
Hello, i have searched the forums for a flashable firmware upgrade from 4.2.2 to 4.3 for my sgs4 (i9506) and can't find it anywhere, could someone please locate me to the correct directions or atleast tell me something working? Thanks
Click to expand...
Click to collapse
What u flashed is only for France Orange branded. They dont have 4.3 for others still
Repulsa said:
Download odin 3.09 then select PDA, and find the file you download now connect the one cable to your PC and press power+volume down to your phone until u reach download mode and connect the other cable to your phone and click start.
Edit: Dont root your device you might Void your warranty after updating.
Click to expand...
Click to collapse
Read this .. http://forum.xda-developers.com/showthread.php?t=2582135&page=2
---------- Post added at 02:12 AM ---------- Previous post was at 02:12 AM ----------
mattish.91 said:
I just flashed the "I9506XXUBML5_I9506FTMBML1_I9506XXUBMK7_HOME.tar.md5" and i get "failed" and now i can't acces my phone, only download mode... please help
Click to expand...
Click to collapse
Read this..... http://forum.xda-developers.com/showthread.php?t=2582135&page=2
If you do really want to upgrade after you read the upper report i can help you cause Odin and Heimdall are no more supported and you cant downgrade anymore to 4.2.2
So think about it twice
And please read here too http://forum.xda-developers.com/showpost.php?p=45666586&postcount=1 ^^
I got 5 buttons in odin and no one says "PDA" i know it's not "PIT" and the other ones are "BL, AP, CP, CSC" i guess it should be "AP" since that button is in the same place as "PDA" should be, and i still get failed when using Heimdall, i have also tried to download root, but since the download speed is so damn low from that site i cant get it... what am i doing wrong?
This is what i get:
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
xenix96 said:
Read this .. http://forum.xda-developers.com/showthread.php?t=2582135&page=2
---------- Post added at 02:12 AM ---------- Previous post was at 02:12 AM ----------
Read this..... http://forum.xda-developers.com/showthread.php?t=2582135&page=2
If you do really want to upgrade after you read the upper report i can help you cause Odin and Heimdall are no more supported and you cant downgrade anymore to 4.2.2
So think about it twice
And please read here too http://forum.xda-developers.com/showpost.php?p=45666586&postcount=1 ^^
Click to expand...
Click to collapse
Hey mate Read this :Edit: Dont root your device you might Void your warranty after updating < its a warning
mattish.91 said:
I got 5 buttons in odin and no one says "PDA" i know it's not "PIT" and the other ones are "BL, AP, CP, CSC" i guess it should be "AP" since that button is in the same place as "PDA" should be, and i still get failed when using Heimdall, i have also tried to download root, but since the download speed is so damn low from that site i cant get it... what am i doing wrong?
This is what i get:
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Bro Please remember if you update your phone to newest 4.3, there is no more chance for you to downgrade your system , and if you root/custom your phone / you will Void your Warranty , just like they said on i9506 thread to wait until someone make a custom rom in order NOT to void that warranty for your phone.
Repulsa said:
Hey mate Read this :Edit: Dont root your device you might Void your warranty after updating < its a warning
Bro Please remember if you update your phone to newest 4.3, there is no more chance for you to downgrade your system , and if you root/custom your phone / you will Void your Warranty , just like they said on i9506 thread to wait until someone make a custom rom in order NOT to void that warranty for your phone.
Click to expand...
Click to collapse
Yea. i got that, but now i can't use the phone so how do i reset it? kies doesnt work, and i can't find a proper 4.2.2 that i can flash with odin, root is not required atm...
mattish.91 said:
Yea. i got that, but now i can't use the phone so how do i reset it? kies doesnt work, and i can't find a proper 4.2.2 that i can flash with odin, root is not required atm...
Click to expand...
Click to collapse
Hello again , try here http://www.sammobile.com/firmwares/1/?model=GT-I9506&pcode=EVR#firmware Hope it helps and choose your country.
Repulsa said:
Hello again , try here http://www.sammobile.com/firmwares/1/?model=GT-I9506&pcode=EVR#firmware Hope it helps and choose your country.
Click to expand...
Click to collapse
Still can't download from those sources since they are too slow, can someone upload it somewhere else please? im allways getting interupted download...
mattish.91 said:
Still can't download from those sources since they are too slow, can someone upload it somewhere else please? im allways getting interupted download...
Click to expand...
Click to collapse
I cant try to download the file i have a 50/50 mbps and make a mirror for you but i need to know what file are you tring to download baseband, country , Carrier and such. have a nice day.
Repulsa said:
I cant try to download the file i have a 50/50 mbps and make a mirror for you but i need to know what file are you tring to download baseband, country , Carrier and such. have a nice day.
Click to expand...
Click to collapse
This is the file: http://samsung-updates.com/details/18144/Galaxy_S4_LTE-A/S800/GT-I9506/HTS/I9506XXUAMJ2.html the source is your's Thanks you'r awesome!
mattish.91 said:
I got 5 buttons in odin and no one says "PDA" i know it's not "PIT" and the other ones are "BL, AP, CP, CSC" i guess it should be "AP" since that button is in the same place as "PDA" should be, and i still get failed when using Heimdall, i have also tried to download root, but since the download speed is so damn low from that site i cant get it... what am i doing wrong?
This is what i get:
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Yes, AP is correct. Try a different data cable.
Enviado desde mi GT-P7510 usando Tapatalk 2
mattish.91 said:
This is the file: http://samsung-updates.com/details/18144/Galaxy_S4_LTE-A/S800/GT-I9506/HTS/I9506XXUAMJ2.html the source is your's Thanks you'r awesome!
Click to expand...
Click to collapse
Hello again here is the 4.2.2 firmware for your GT-I9506 , Make sure to Follow the instruction. and hoping to fix your problem, Have a nice day.
Gt-19506 4.2.2 Firmware https://mega.co.nz/#!XV4wRZ6b!LEDB9WuyI9SLUjqDsPrlBhTRSo9z1Sz6uWRCiq74qE8
Instructions For Flashing Firmware:
- Extract (unzip) the firmware file
- Download Odin3 v3.09 (From https://mega.co.nz/#!UdRRyCAT!H4FyVxYynNWvXqRNmnpMGQRCP-dG3uykgP2pT4rh8Ek)
- Extract Odin .ZIP file
- Open Odin3 v3.09
- Restart phone in download mode (Press and hold Power + Volume down buttons) in order to reach download mode.
- Connect phone and wait until you get a blue sign in Odin
- Add I9506XXUAMJ2_I9506HTSAMJ2_I9506XXUAMI1_HOME.tar.md 5 to AP
- Make sure re-partition is NOT ticked
- Click start button, and wait a few minutes.
-Your phone should automatically reboot after completion
-You can now disconnect your phone from computer .
- If you encounter any issues with the firmware (Any FC, Bootloop etc)
- Boot into recovery mode (power+vol up)
- Choose to wipe/factory reset. (THIS WILL ERASE ALL OF YOUR DATA INCLUDING YOUR INTERNAL SD CARD!)
- Then choose reboot and you should be good to go!
Repulsa said:
Hello again here is the 4.2.2 firmware for your GT-I9506 , Make sure to Follow the instruction. and hoping to fix your problem, Have a nice day.
Gt-19506 4.2.2 Firmware https://mega.co.nz/#!XV4wRZ6b!LEDB9WuyI9SLUjqDsPrlBhTRSo9z1Sz6uWRCiq74qE8
Instructions For Flashing Firmware:
- Extract (unzip) the firmware file
- Download Odin3 v3.09 (From https://mega.co.nz/#!UdRRyCAT!H4FyVxYynNWvXqRNmnpMGQRCP-dG3uykgP2pT4rh8Ek)
- Extract Odin .ZIP file
- Open Odin3 v3.09
- Restart phone in download mode (Press and hold Power + Volume down buttons) in order to reach download mode.
- Connect phone and wait until you get a blue sign in Odin
- Add I9506XXUAMJ2_I9506HTSAMJ2_I9506XXUAMI1_HOME.tar.md 5 to AP
- Make sure re-partition is NOT ticked
- Click start button, and wait a few minutes.
-Your phone should automatically reboot after completion
-You can now disconnect your phone from computer .
- If you encounter any issues with the firmware (Any FC, Bootloop etc)
- Boot into recovery mode (power+vol up)
- Choose to wipe/factory reset. (THIS WILL ERASE ALL OF YOUR DATA INCLUDING YOUR INTERNAL SD CARD!)
- Then choose reboot and you should be good to go!
Click to expand...
Click to collapse
This is my result:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9506XXUAMJ2_I9506HTSAMJ2_I9506XXUAMI1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
so this wasn't working, any idea? xD
mattish.91 said:
This is my result:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9506XXUAMJ2_I9506HTSAMJ2_I9506XXUAMI1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
so this wasn't working, any idea? xD
Click to expand...
Click to collapse
You are trying to flash a stock 4.2.2 over a 4.3 knox bootloader!!!! If course you will get error!!!!
Since you have 4.3 knox bootlader, you only can flash stock 4.3 roms. Download the last update for your model from sammobile and reflash again with same process.
Enviado desde mi GT-I9500 usando Tapatalk 2
jaswinky said:
You are trying to flash a stock 4.2.2 over a 4.3 knox bootloader!!!! If course you will get error!!!!
Since you have 4.3 knox bootlader, you only can flash stock 4.3 roms. Download the last update for your model from sammobile and reflash again with same process.
Enviado desde mi GT-I9500 usando Tapatalk 2
Click to expand...
Click to collapse
im sorry, im totally lost and confused, what am i missing, there is only one 4.3 rom that is flashable throu odin and thats the french version and that should work in Sweden aswell, when i flash that rom i'm still getting that error, should i try to flash root before continuing? incase yes, which one? Im really grateful for all your help.
mattish.91 said:
im sorry, im totally lost and confused, what am i missing, there is only one 4.3 rom that is flashable throu odin and thats the french version and that should work in Sweden aswell, when i flash that rom i'm still getting that error, should i try to flash root before continuing? incase yes, which one? Im really grateful for all your help.
Click to expand...
Click to collapse
hello again , i did not know that you have a the newest bootloader for your phone and yet you requested a 4.2.2 anyways since your Knox void warranty is not 0x1 yet go ahead and send it back for repair , im sure they will fix this problem, since you did not void your warranty yet that's the best solution i can give you. or wait to someone here on xda know's how to fix this issue. have a nice day.
Repulsa said:
hello again , i did not know that you have a the newest bootloader for your phone and yet you requested a 4.2.2 anyways since your Knox void warranty is not 0x1 yet go ahead and send it back for repair , im sure they will fix this problem, since you did not void your warranty yet that's the best solution i can give you. or wait to someone here on xda know's how to fix this issue. have a nice day.
Click to expand...
Click to collapse
The problem is solvet simply flashed root, the only thing not working (so far) is keyboard xD and it is running 4.3

Fixed - I9505 - kernel is not seandroid enforcing - Reboot & Hangs ! Easy !

S4 I9505
Problem:
Start up screen top left corner shows:
kernel is not seandroid enforcing
Hangs up or Reboots.
I updated my S4 to Version: I9505XXUEMKE
Then I used Odin to Flash a Root with Stock recovery & SU, something went WRONG!
Knox is now 0x1, which should not have happened, but what can I say.
BaM, I got the Reboots & Hang ups.
But, I still could get into Recovery & Download Mode!
SO HERE IS THE FIX:
1. Download, Odin 3 - THx 2 - daerragh
--- I used Ver.: Odin 3.07
2. Download, http://www.sammobile.com/firmwares/2/
--- Register
--- And download your Firmware, if you know which you had before it crashed choose that one otherwise Upgrade to latest.
--- For me it was the latest version - I9505XXUEMKE ---- THx 2 -- Repulsa for the tip.
3. Start Odin 3.07 --- [Should it "FAIL" Read note at the Bottom #6].
--- Make sure - Auto Reboot & F. Reset Time are checked - Nothing else.
--- Click on PDA choose your Firmware file in my case "I9505XXUEMKE"
--- this can take a minute or two, WAIT, the PDA will check mark itself.
4. To start Turn off your phone completely ! Now hold following buttons to get into Download Mode,
--- Volume Down
--- Home
--- and last Power
--- S4 will enter into DL Mode
Seeing you have already tried to root you phone, you should have you Samsung USB drivers.
5. Press Start
--- This will take time, after it Reboot itself,
--- remove the USB Cabel & wait
--- at least 5 minutes don't remember how long, I came back after 5 Minutes and it was done,
---------- so then if everything went well for you, have fun :good: .
6. FAIL
--- Should it Fail while uploading to your phone,
--- A. Remove Battery
--- B. Remove USB cabel
--- C. Restart.
--- Should it Fail again (which happend to me), then Do A. B. C. again.
--- and this time Touch your screen about every minute.
I Know that sounds weird, but it worked for me maybe something to do with "Stand by? no clue".
If this has help you in anyway please hit that :good: Thanks Bottun
I AM NOT RESPONSIBLE for anything happening to your phone as a result of you flashing this Rom.
[Help Please] TMO-S4- Kernel is not seandroid enforcing
Hello,
Let me start off by saying, I'm a complete newbie when it comes to rooting (Infact - It took me a few days to even convince myself to do this) and I did look around for several guilds on how to remove this error (Downloaded Odin - Got Stock TAR.MD5) But I still get this error on my phone when I start the phone, it wouldn't be much of a probelm, except it hangs for a while and then restarts.) It also gets stuck for a long time at the T-Mobile load screen. The Wifi Wont turn on their... Please Help.
Galaxy S4: SGH-M919
T-Mobile...
I'm not an expert in Android OS but I think this is not an error. It is more of a notification that the STOCK KERNEL has been change to a CUSTOM one.
eclpsues said:
I'm not an expert in Android OS but I think this is not an error. It is more of a notification that the STOCK KERNEL has been change to a CUSTOM one.
Click to expand...
Click to collapse
You are right :highfive:
Hi guys
A friend and I tried to update my rooted Samsung S4 i9505 to the official kitkat version. Had the unofficial one before. Unfortunatly we didn't turn on the usb debugging and there wasn't enough space on my memory card. After removing the data from the sd card it still didn't work (usb debuging?). My friend then tried to install a custom rom of some sort (I'm the noob here. He has some skills). No whenever I try to start my cell up the message KERNAL IS NOT SEANDROID ENFORCING pops up in the top left corner. Can I turn on the usb debugging from the pc? What should I do?
Thanks
illias9 said:
Hi guys
A friend and I tried to update my rooted Samsung S4 i9505 to the official kitkat version. Had the unofficial one before. Unfortunatly we didn't turn on the usb debugging and there wasn't enough space on my memory card. After removing the data from the sd card it still didn't work (usb debuging?). My friend then tried to install a custom rom of some sort (I'm the noob here. He has some skills). No whenever I try to start my cell up the message KERNAL IS NOT SEANDROID ENFORCING pops up in the top left corner. Can I turn on the usb debugging from the pc? What should I do?
Thanks
Click to expand...
Click to collapse
I tried to install the Gummy Rom but I got the same problem. It gets stuck in the rebooting or something. It wont pass the samsung start screen. What should I do?
Tried all of the above and no go.
Hi i have CM on my Australia XSA Samsung 19505 and i am trying to get it back to stock though when i try to flash it in Odin it fails all the time i cant get into recovery though i am able to access download mode.
I am using Odin 3.09 with the correct stock rom for my device and when i run it i get this error message
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMK9_I9505XSAEMK3_I9505XXUEMK9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sbl1.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> sbl2.mbn
<ID:0/007> sbl3.mbn
<ID:0/007> rpm.mbn
<ID:0/007> aboot.mbn
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And on my device is error message
start [224,1440]
sw rev check fail fused 4 binary 3.
I also have the "kernel is not seandroid enforcing" message.
When i restart my device i get an error message "Firmware upgrade encountered an issue please select recovery mode in kies and try again"
I have tried to use Kies both versions and it doesn't work, The only way to get it to work is flash CWM which allows me back into my device.
Any ideas on how to get back to stock Thanks?
Natza09 said:
Hi i have CM on my Australia XSA Samsung 19505 and i am trying to get it back to stock though when i try to flash it in Odin it fails all the time i cant get into recovery though i am able to access download mode.
I am using Odin 3.09 with the correct stock rom for my device and when i run it i get this error message
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMK9_I9505XSAEMK3_I9505XXUEMK9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sbl1.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> sbl2.mbn
<ID:0/007> sbl3.mbn
<ID:0/007> rpm.mbn
<ID:0/007> aboot.mbn
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And on my device is error message
start [224,1440]
sw rev check fail fused 4 binary 3.
I also have the "kernel is not seandroid enforcing" message.
When i restart my device i get an error message "Firmware upgrade encountered an issue please select recovery mode in kies and try again"
I have tried to use Kies both versions and it doesn't work, The only way to get it to work is flash CWM which allows me back into my device.
Any ideas on how to get back to stock Thanks?
Click to expand...
Click to collapse
Use a different usb port. Always use the ports on the back of your pc not the ones on the front.
Lennyz1988 said:
Use a different usb port. Always use the ports on the back of your pc not the ones on the front.
Click to expand...
Click to collapse
Thanks Lennyz for the reply, I tried the back usb 2.0 and 3.0 and both failed with the same error message as originally posted. Can i just restore the kernel some how and will that fix the issue?
Natza09 said:
Thanks Lennyz for the reply, I tried the back usb 2.0 and 3.0 and both failed with the same error message as originally posted. Can i just restore the kernel some how and will that fix the issue?
Click to expand...
Click to collapse
I think I know what you did. You try to flash an older stock firmware on to your device. Pick a newer firmware because downgrading is not possible.
Lennyz1988 said:
I think I know what you did. You try to flash an older stock firmware on to your device. Pick a newer firmware because downgrading is not possible.
Click to expand...
Click to collapse
I have tried to flash several Roms that are 4.4 and that are compatible with my device using clock work mod and it doesn't work as i keep getting a Status 7 error which i have found a possible fix for here in the forum i will attempt to resolve and report back.
---------- Post added at 11:40 PM ---------- Previous post was at 11:05 PM ----------
Natza09 said:
I have tried to flash several Roms that are 4.4 and that are compatible with my device using clock work mod and it doesn't work as i keep getting a Status 7 error which i have found a possible fix for here in the forum i will attempt to resolve and report back.
Click to expand...
Click to collapse
Ok so i put TWTP back on and i was able to install Goldeneye Rom 4.4.2, Which is working great. However when i reboot im still getting the Kernel is not seandroid enforcing message in red. As i can not restore to stock Rom as Australia XSA 4.4 isn't out yet is there any other way to get rid of this message. Thanks again.
did anyone tried this ??
Natza09 said:
Hi i have CM on my Australia XSA Samsung 19505 and i am trying to get it back to stock though when i try to flash it in Odin it fails all the time i cant get into recovery though i am able to access download mode.
I am using Odin 3.09 with the correct stock rom for my device and when i run it i get this error message
I have tried to use Kies both versions and it doesn't work, The only way to get it to work is flash CWM which allows me back into my device.
Any ideas on how to get back to stock Thanks?
Click to expand...
Click to collapse
iuts coz you are trying to downgrade the aboot file which is associated with know security check .. u have to flash the same or upgrade
franny23dmt said:
iuts coz you are trying to downgrade the aboot file which is associated with know security check .. u have to flash the same or upgrade
Click to expand...
Click to collapse
Yeah its all sorted now as version 4.4.2 has been officially released as stock on my Samsung S4, So back to "factory" now and no more message. Off to ebay it goes and Hello HTC One M8 .
Hi,
I'll Install WizCyan custom Rom on My GT-I9505 by TWRP mode. Its not a Error its a Premission That are allow when we use other roms.
●Press Volume Up and Volume Down Key at same
time and Hold it. This methode is use to Force Start your Rom

[Q] secure chek fail : recovery, can´t flash anything

Hi guys I'm having problems trying to root my note 3, in fact i can't flash anything with odin.
It is a n900w8 from Telcel, with 4.4.2 stock rom.
I tried flashing to root it and tried to flash a custom recovery and nothing.
this is what odin shows:
<ID:0/009> recovery.img
<ID:0/009> NAND Write Start!!
<ID:0/009> FAIL! (Auth)
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and in the phone it shows in red letters : Secure check fail : recovery
I already checked the reactivation lock, and it isn´t checked.
Do you have an idea of what could it be?
If you need another info pleas tell me, i would appreciate any help thanks
1. Reinstall the Samsung's drivers.
2. Try other USB cable/port.
3. Take a look if you are flashing the latest firmware for your device. Latest is: HERE.
Joku1981 said:
1. Reinstall the Samsung's drivers.
2. Try other USB cable/port.
3. Take a look if you are flashing the latest firmware for your device. Latest is: .
Click to expand...
Click to collapse
thanks for the answer but i didn´t work , I can flash that rom but only that. I tried to flash the root and the same error.

Note 4 problems

Hello all.
I'm having multiple problems with my Note 4.
Model is SM-N910F and the problems are:
Does not boot to OS
OS Flash works but does not do final stuff on the phone
When installing OS, it will just spit out failed to mount /efc (Invalid argument)
Tried Kies recovery, that fails too
Custom recovery does not work.
Is it safe to say that this device is officially dead and i should get a new phone?
JantsoP said:
Hello all.
I'm having multiple problems with my Note 4.
Model is SM-N910F and the problems are:
Does not boot to OS
OS Flash works but does not do final stuff on the phone
When installing OS, it will just spit out failed to mount /efc (Invalid argument)
Tried Kies recovery, that fails too
Custom recovery does not work.
Is it safe to say that this device is officially dead and i should get a new phone?
Click to expand...
Click to collapse
Flash 4files repair firmware with PIT file then do factory reset.
Get from link below
https://www.androidfilehost.com/?fid=24407100847294341
Extract thr file you will get 5 files ( BL/AP/CP/CSC/PIT
)
UPLOAD ALL FILES IN ODIN CORRECTLY AND GO TO ODIN OPTIONS CHECK "NAND ERASEALL".
HIT START
ONCE ODIN SHOWS PASS GO TO STOCK RECOVERY MAKE FACTORY RESET THEN REBOOT.
If this does not work then your eMMc chip need to replace from motherboard.
Hope this will help.
Trex888 said:
Flash 4files repair firmware with PIT file then do factory reset.
Get from link below
https://www.androidfilehost.com/?fid=24407100847294341
Extract thr file you will get 5 files ( BL/AP/CP/CSC/PIT
)
UPLOAD ALL FILES IN ODIN CORRECTLY AND GO TO ODIN OPTIONS CHECK "NAND ERASEALL".
HIT START
ONCE ODIN SHOWS PASS GO TO STOCK RECOVERY MAKE FACTORY RESET THEN REBOOT.
If this does not work then your eMMc chip need to replace from motherboard.
Hope this will help.
Click to expand...
Click to collapse
Hey Trex888.
ODIN fails with this message:
Code:
<ID:0/003> Receive Response from boot-loader
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> FAIL! (Write)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
So the eMMc chip is dead and needs to be replaced?
JantsoP said:
Hey Trex888.
ODIN fails with this message:
Code:
<ID:0/003> Receive Response from boot-loader
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> FAIL! (Write)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
So the eMMc chip is dead and needs to be replaced?
Click to expand...
Click to collapse
Try odin version 3.10.
Try restart your pc.
Make sure all files inserted correctly in odin.
Try different usb cable.
Do a factory reset from recovery before start flashing.
Trex888 said:
Try odin version 3.10.
Try restart your pc.
Make sure all files inserted correctly in odin.
Try different usb cable.
Do a factory reset from recovery before start flashing.
Click to expand...
Click to collapse
Did all that and no joy. Anything else i could try or should i just give up and get a new one?
JantsoP said:
Did all that and no joy. Anything else i could try or should i just give up and get a new one?
Click to expand...
Click to collapse
This method sounds weird but give it a try not kidding i am serious
Put your phone in a plastic airpack bag in freezer without battery for 2 or 3 hours or better if whole night then take out immediately go to download mode and flash stock firmware.
Dozens of note 4 users ware able to recover by this crazy method You can read more about this down below.
https://forum.xda-developers.com/note-4/snapdragon-dev/note-4-debrick-img-t3488114
Trex888 said:
This method sounds weird but give it a try not kidding i am serious
Put your phone in a plastic airpack bag in freezer without battery for 2 or 3 hours or better if whole night then take out immediately go to download mode and flash stock firmware.
Dozens of note 4 users ware able to recover by this crazy method You can read more about this down below.
https://forum.xda-developers.com/note-4/snapdragon-dev/note-4-debrick-img-t3488114
Click to expand...
Click to collapse
Now that sounds weird
Will try it

Categories

Resources