this is what i've done,
i flashed a dfp-125 sbf on my mb526.
all worked well, even when i restored apps with titanium backup,
what i missed is only an rtl fix, so i enter the custom recovery the yellow one, and wiped cache and dalvik and then install my rtl that i found.
my phone didnt come up from m logo so i did a factory reset from the custom and tried and nothing.
then from stock recovery and now it wont come uponly the white led.
every sbf that i tried is giving my passd but wont turn on te device.
is there any hope for my?
Flash a more recent sbf. As a last resort try dfp231, which should get your phone to atleast the red Motorola logo. Then wipe data and cache from stock recovery
Sent from my MB526 using Tapatalk 2
thekguy said:
Flash a more recent sbf. As a last resort try dfp231, which should get your phone to atleast the red Motorola logo. Then wipe data and cache from stock recovery
Sent from my MB526 using Tapatalk 2
Click to expand...
Click to collapse
tnx
tried that, i flashed an asian sbf becoz of the rtl, i found hebrew on it.
now i have a rooted sbf+hebrew with all my apps on it.
its what i wanted the first place!
if i want to make it a fixed sbf for hebrew and upload it to this foum, how do i do it?
i want to help the others
You can make a fixed sbf by making a system.img of your current setup, and using the sbf tools to replace the existing one with yours. Search for those tools, and read up the guide
Sent from my MB526 using Tapatalk 2
Related
i firstly had an unsucessful flash by installing ics cm9,on miui then i was stuck on bootlooop but to get my phone working again i flashed china sbf 2.2
but it was stuck der olso so i flashed JORDN_U3_97.21.51 eclair
it started working normally but ....
now when i rooted nd installed custom recovery via systemrecovery.apk
it all worked well...but when i tried to install cm7.11 by quarks its suck on the motorola logo with that bee what to do help!!!
i cant stay on this eclair its baaad!!
(i was on miui before all this adventure took place ,i used to flash my phone without any worry until this haapppend help me plzz anyone)
See if this guide helps. Use the cee Froyo.
@zorua
can i install cm7.11 after cee froyo?
without any probs?
where do i put the nandroid of cee froyo?
d.o.doubleg said:
where do i put the nandroid of cee froyo?
Click to expand...
Click to collapse
clockworkmod/backup on sd card.
Also, yes you can install CM7 after installing cee froyo.
Have you installed 2nd init on eclair?
sir but ive used goapks system recovery nd installedd the custom recovery as on cee's froyo what 2 do now?
d.o.doubleg said:
sir but ive used goapks system recovery nd installedd the custom recovery as on cee's froyo what 2 do now?
Click to expand...
Click to collapse
If you are using goapkrev recovery, then the backup goes into sdcard/goapkrev/backup
If the folder doesn't exist, make it.
thanks it worked thanks mate!
dude
1 more question can i install the custom recovery from system recovery.aqk
and install cm7.1.110 normally as i used to do or i need to flash the chinese sbf again?THANKS!!
On cee froyo, install 2nd init and then you can flash cm7 using that.
Sent from my MB526 using XDA App
sir 1 more noob question i forgot to flash gapps can i do it using sndinit
will it be stuck again?
sir its not working i installed 2ndinit thru sndinit nd then installed cm7 and gapps iy all went smooth but wheen it booted nd came upon dat touch the android to start it starts restarting from dat cm7 animation again and again i donno wat to do
can i flash the sea froyo(chinese froyo)again and start from the stock?
Yes you can flash gapps again but remember to clear the cache after you flash it.
EDIT: Try clearing data and cache from clockworkmod again. Also, disable the overclock module from 2nd init and see if it works after that.
Sent from my MB525 using XDA App
can i flash sea froyo (as said chinese froyo) from rsd lite?
Why do you want to flash froyo again? Did you try what I said in my previous post?
can u tell me d whole procedure step by step in detail ive tried a lot last time u tell me dis
whenever i'm trying to touch that android logo my phone restarts from that cm7 logo
whattodo
plz help anyone please!
Are you blind or what? Did you try my suggestions in the other post? Did you try formatting data+cache from clockworkmod? Also, disable the overclock module from 2nd init
Sent from my MB525 using XDA App
i tried clearing them but it is still restarting at that cm7 loop.
what to do.
Download the nightly this time from tanguy.forumdoandroid.com and flash it again. Clear data and cache and see if it works now.
Sent from my MB525 using XDA App
well I have defy green lense... I just flash miui pikachu edition, It was working fine then last night I'd just flash another JB ROM that was working fine... but when I again try to flash pikachu ROM it was stuck on motorola M logo no blue LED turn on ....after that I flash a fixed sbf "4.5.3-109-fixed.sbf" this one....
the problem is same no blue LED turn on ... Please let me know how I can get CMW again .. step by step procedure needed. Thanks!
Note: I was using GB kernel 3.4.7
Your 2ndinit got wiped, hence no blue LED. If you can boot into the stock ROM, you need to root it and install 2ndinit apk(just search for 2ndinit defy on Google) and install your custom recovery again. After this you will get the blue LED again
Sent from my MB526 using xda premium
thekguy said:
Your 2ndinit got wiped, hence no blue LED. If you can boot into the stock ROM, you need to root it and install 2ndinit apk(just search for 2ndinit defy on Google) and install your custom recovery again. After this you will get the blue LED again
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
I cant boot into stock ROM, phone stuck on motorola M logo..... Can I flash full sbf again, coz I was on fixed GB sbf?
slhysf said:
I cant boot into stock ROM, phone stuck on motorola M logo..... Can I flash full sbf again, coz I was on fixed GB sbf?
Click to expand...
Click to collapse
Get into stock recovery by keeping volume down pressed when powering the phone.
When you see a triangle with excl. mark press volume down and up at the same time
Wipe data and cache
If above doesn't work flash proper full sbf and repeat the procedure
You're stuck on red logo as you have not wiped data from stock recovery, and instructions are /\
Sent from my MB526 using xda premium
(i read many threads relating my issue but they were not same, they was little difference in the problem. and i also tried there solutions but no improvement. so i decided to ask in a thread)
i was using defy+ with CM7 rom.
I installed this rom on my defy+
http://forum.xda-developers.com/showthread.php?t=2044797
first it booted and was working but after rebooting it resulted in boot loop .
( it shows Motorola sign then shows rom animation within few seconds is resumes rom animation and it keeps repeating animation.)
i waited for it an hour but is didn't go well.
then i tried restoring my old rom using CWM but i was unable to restore it is also resulted in same...
then i tried installing sdf using rsd but i have no improvement....
Now i can only go to bootloader version 09.1 and i says battery is low , can't program . i put the charger for whole night but i still says battery low can't program
can you please help me solving this problem
After installing that Rom you needed to enter boot menu and format data to ext4. Now, if you're unable to flash any sbf due to low battery then refer here: http://forum.xda-developers.com/showthread.php?t=892026
Or if you have access to another defy then use its battery and flash the sbf. Wipe data from stock recovery if you run into any issues after sbf flash
As stated below dalvik cache should be wiped, and data is automatically wiped when you format it to ext4 as stated above
Sent from my MB526 using xda premium
thekguy said:
After installing that Rom you needed to enter boot menu and format data to ext4. Now, if you're unable to flash any sbf due to low battery then refer here: http://forum.xda-developers.com/showthread.php?t=892026
Or if you have access to another defy then use its battery and flash the sbf. Wipe data from stock recovery of you run into any issues after sbf flash
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
Or in other words you need to wipe data/cache and dalvik BEFORE and AFTER flashing the custom ROM (neagan or other). For now charge the battery and do the sbf flash. Pay attention at the "optional" indications. It better to do it.
CWM is missing
using your link i can solve the problem
but i dont have CWM so i cant wipe delvik data/cach
i only have bootloader
i only can go to bootloader and can't do any thing else. because CWM is removed.
tell me if you have any information about to do something using bootloader..
Do it from stock recovery, data wipe and cache wipe
Sent from my MB526 using xda premium
From stock recovery (bootloader) you will format as ext3 but is better to format in ext4 and that can be done from custom recovery. For that you have to install 2init and run it.
He's unable to boot...boot loop was before battery issue
Sent from my MB526 using xda premium
thekguy said:
He's unable to boot...
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
Yes because of low battery. Software solution is ... after charging.
where is stock recovery??
how to boot in stock recovery??? sorry I dont know if there any stock recovery is existed...... ( i tried different buttons while Motorola sign but i got nothing except bootloader and download mod)
tell me i think i can do it using stock recovery
because there is no problem in bootloader. even i am able to flash new SDF.
it makes trouble in loading ROM....
what do you think?
battery is working now
thekguy said:
He's unable to boot...boot loop was before battery issue
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
i solved this problem using universal charger. i pulled off the battery and put in universal charger and charged it for two hours.
stock recovery?
now i just need to know how to boot in stock recovery???
AW: [Q] Defy+ not loading any rom.
There is a beginner guide anywhere in xda/defy sektion
You should read it
MB525 red lense
stock recovery?
i just need to now how to go into stock recovery?
How do I enter Recovery Mode?!: With the Phone off press VOLUME DOWN then, while still pressed, power up the phone and leave VOL key pressed until you see a Yellow triangle, once you see this you are in Recovery now press Vol Up and Vol Down at the same time (if you are in Froyo) and the menu will appear, if you are on Éclair the menu should appear without having to press anything.
copy/paste from this thread.
thanks
Thanks bros
I recovered my phone and i is running with CM7 and i am not gonna try CM10 again until it comes with all bug fixes..
thanks again for your help..
I need to flash my Moto Defy Phone Using RSD lite
BUt i have to wipe data and cash . The problem is I cant access Stock recovery to wipe both of them ..
And my phone wont boot but stuck at Android Word .... So what's the solution please ??
If you can't get into stock recovery, flash stock rom first to recover it.
Did your flash finished with "finish/pass", or it's "please manually power your phone"?
You don't need to wipe your phone to flash it with RSDLite, everything will be wiped during flashing.
Sorry for bad english...
Sent from France to the best forum ever using my awesome Nexus 4
baxtandroid said:
You don't need to wipe your phone to flash it with RSDLite, everything will be wiped during flashing.
Sorry for bad english...
Sent from France to the best forum ever using my awesome Nexus 4
Click to expand...
Click to collapse
Its not true allways. Sometime u got bootloop. Wipe cache and delvic or factory reset is the only solution in such case
Sent from my MB525 using Tapatalk 2
hey guys, i finally need some help with my phone before i'll totally destroy it.
i was on cm-10-20130709-NIGHTLY-mb526 and installed the newest blechdose kernel, 30.08 i think.
it worked pretty well until i had some very random freeze while using the browser.
rebooting turned into a bootloop, i tried to wipe cache and dalvik then, after another reboot it took me to this "optimizing apps" thing, where it stuck again on "starting apps".
i managed how to get into custom recovery and did a system wipe, i thought thats the same as factory reset, but it turned out that it wasnt..
so the situation now is, that the phone is stuck on the standard boot logo after turning on, i cannot get into custom recovery anymore, just stock recovery works.
whats the best workaround for this ?
thanks for helping!
Sbf flash is the only thing which will revive your phone
Sent from my MB526 using Tapatalk 2
thekguy said:
Sbf flash is the only thing which will revive your phone
Sent from my MB526 using Tapatalk 2
Click to expand...
Click to collapse
how can i do that? via stock recovery or rsdlite?
i'm trying to get rsd lite to work right now
.jano said:
how can i do that? via stock recovery or rsdlite?
i'm trying to get rsd lite to work right now
Click to expand...
Click to collapse
You need to wipe data and cache through stock recovery and then flash sbf using rsdlite.
thanks for your help its working again