I need to flash my Moto Defy Phone Using RSD lite
BUt i have to wipe data and cash . The problem is I cant access Stock recovery to wipe both of them ..
And my phone wont boot but stuck at Android Word .... So what's the solution please ??
If you can't get into stock recovery, flash stock rom first to recover it.
Did your flash finished with "finish/pass", or it's "please manually power your phone"?
You don't need to wipe your phone to flash it with RSDLite, everything will be wiped during flashing.
Sorry for bad english...
Sent from France to the best forum ever using my awesome Nexus 4
baxtandroid said:
You don't need to wipe your phone to flash it with RSDLite, everything will be wiped during flashing.
Sorry for bad english...
Sent from France to the best forum ever using my awesome Nexus 4
Click to expand...
Click to collapse
Its not true allways. Sometime u got bootloop. Wipe cache and delvic or factory reset is the only solution in such case
Sent from my MB525 using Tapatalk 2
Related
I tried to install the MAK DROID ROM and everything went well, but it hangs at the boot screen, which appears GT-S5300B.
PLEASE HELP ME.
Reflash it....
And wipe data and cache again
Sent from my GT-S5360 using xda premium
How?
You can do a step by step of how to do this?
Install fresh stock
Boot in cwm recovery
Wipe data and cache
Flash your rom
After it finishes wipe data and cache again
Cross your fingers and wait till it vibrates
Sent from my GT-S5360 using xda premium
Sorry, i am a beginner in the android world (and in the english too)
You can give me a "FRESH STOCK" for my S5300B?
Thanks for the help.
alcides2 said:
Sorry, i am a beginner in the android world (and in the english too)
You can give me a "FRESH STOCK" for my S5300B?
Thanks for the help.
Click to expand...
Click to collapse
Stock= stock firmware...
Which is provided by samsung...
Sent from my GT-S5360 using xda premium
Solution
These are the ways you can do
1 open CWM recovery
2 Wipe Data , Wipe Cache , Advance>Wipe Dalvik cache
3 flash the ROM again
Press thanks if I helped
I try download the stock rom, and i have 2 archives
GT-S5300L_Kernel.tar
GT-S5300L_Platform.tar
What i do now???
(i read many threads relating my issue but they were not same, they was little difference in the problem. and i also tried there solutions but no improvement. so i decided to ask in a thread)
i was using defy+ with CM7 rom.
I installed this rom on my defy+
http://forum.xda-developers.com/showthread.php?t=2044797
first it booted and was working but after rebooting it resulted in boot loop .
( it shows Motorola sign then shows rom animation within few seconds is resumes rom animation and it keeps repeating animation.)
i waited for it an hour but is didn't go well.
then i tried restoring my old rom using CWM but i was unable to restore it is also resulted in same...
then i tried installing sdf using rsd but i have no improvement....
Now i can only go to bootloader version 09.1 and i says battery is low , can't program . i put the charger for whole night but i still says battery low can't program
can you please help me solving this problem
After installing that Rom you needed to enter boot menu and format data to ext4. Now, if you're unable to flash any sbf due to low battery then refer here: http://forum.xda-developers.com/showthread.php?t=892026
Or if you have access to another defy then use its battery and flash the sbf. Wipe data from stock recovery if you run into any issues after sbf flash
As stated below dalvik cache should be wiped, and data is automatically wiped when you format it to ext4 as stated above
Sent from my MB526 using xda premium
thekguy said:
After installing that Rom you needed to enter boot menu and format data to ext4. Now, if you're unable to flash any sbf due to low battery then refer here: http://forum.xda-developers.com/showthread.php?t=892026
Or if you have access to another defy then use its battery and flash the sbf. Wipe data from stock recovery of you run into any issues after sbf flash
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
Or in other words you need to wipe data/cache and dalvik BEFORE and AFTER flashing the custom ROM (neagan or other). For now charge the battery and do the sbf flash. Pay attention at the "optional" indications. It better to do it.
CWM is missing
using your link i can solve the problem
but i dont have CWM so i cant wipe delvik data/cach
i only have bootloader
i only can go to bootloader and can't do any thing else. because CWM is removed.
tell me if you have any information about to do something using bootloader..
Do it from stock recovery, data wipe and cache wipe
Sent from my MB526 using xda premium
From stock recovery (bootloader) you will format as ext3 but is better to format in ext4 and that can be done from custom recovery. For that you have to install 2init and run it.
He's unable to boot...boot loop was before battery issue
Sent from my MB526 using xda premium
thekguy said:
He's unable to boot...
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
Yes because of low battery. Software solution is ... after charging.
where is stock recovery??
how to boot in stock recovery??? sorry I dont know if there any stock recovery is existed...... ( i tried different buttons while Motorola sign but i got nothing except bootloader and download mod)
tell me i think i can do it using stock recovery
because there is no problem in bootloader. even i am able to flash new SDF.
it makes trouble in loading ROM....
what do you think?
battery is working now
thekguy said:
He's unable to boot...boot loop was before battery issue
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
i solved this problem using universal charger. i pulled off the battery and put in universal charger and charged it for two hours.
stock recovery?
now i just need to know how to boot in stock recovery???
AW: [Q] Defy+ not loading any rom.
There is a beginner guide anywhere in xda/defy sektion
You should read it
MB525 red lense
stock recovery?
i just need to now how to go into stock recovery?
How do I enter Recovery Mode?!: With the Phone off press VOLUME DOWN then, while still pressed, power up the phone and leave VOL key pressed until you see a Yellow triangle, once you see this you are in Recovery now press Vol Up and Vol Down at the same time (if you are in Froyo) and the menu will appear, if you are on Éclair the menu should appear without having to press anything.
copy/paste from this thread.
thanks
Thanks bros
I recovered my phone and i is running with CM7 and i am not gonna try CM10 again until it comes with all bug fixes..
thanks again for your help..
this is what i've done,
i flashed a dfp-125 sbf on my mb526.
all worked well, even when i restored apps with titanium backup,
what i missed is only an rtl fix, so i enter the custom recovery the yellow one, and wiped cache and dalvik and then install my rtl that i found.
my phone didnt come up from m logo so i did a factory reset from the custom and tried and nothing.
then from stock recovery and now it wont come uponly the white led.
every sbf that i tried is giving my passd but wont turn on te device.
is there any hope for my?
Flash a more recent sbf. As a last resort try dfp231, which should get your phone to atleast the red Motorola logo. Then wipe data and cache from stock recovery
Sent from my MB526 using Tapatalk 2
thekguy said:
Flash a more recent sbf. As a last resort try dfp231, which should get your phone to atleast the red Motorola logo. Then wipe data and cache from stock recovery
Sent from my MB526 using Tapatalk 2
Click to expand...
Click to collapse
tnx
tried that, i flashed an asian sbf becoz of the rtl, i found hebrew on it.
now i have a rooted sbf+hebrew with all my apps on it.
its what i wanted the first place!
if i want to make it a fixed sbf for hebrew and upload it to this foum, how do i do it?
i want to help the others
You can make a fixed sbf by making a system.img of your current setup, and using the sbf tools to replace the existing one with yours. Search for those tools, and read up the guide
Sent from my MB526 using Tapatalk 2
hey guys, i finally need some help with my phone before i'll totally destroy it.
i was on cm-10-20130709-NIGHTLY-mb526 and installed the newest blechdose kernel, 30.08 i think.
it worked pretty well until i had some very random freeze while using the browser.
rebooting turned into a bootloop, i tried to wipe cache and dalvik then, after another reboot it took me to this "optimizing apps" thing, where it stuck again on "starting apps".
i managed how to get into custom recovery and did a system wipe, i thought thats the same as factory reset, but it turned out that it wasnt..
so the situation now is, that the phone is stuck on the standard boot logo after turning on, i cannot get into custom recovery anymore, just stock recovery works.
whats the best workaround for this ?
thanks for helping!
Sbf flash is the only thing which will revive your phone
Sent from my MB526 using Tapatalk 2
thekguy said:
Sbf flash is the only thing which will revive your phone
Sent from my MB526 using Tapatalk 2
Click to expand...
Click to collapse
how can i do that? via stock recovery or rsdlite?
i'm trying to get rsd lite to work right now
.jano said:
how can i do that? via stock recovery or rsdlite?
i'm trying to get rsd lite to work right now
Click to expand...
Click to collapse
You need to wipe data and cache through stock recovery and then flash sbf using rsdlite.
thanks for your help its working again
I just want to share my experience after a bad flash and no way to recover.
I was still able to get to TWRP. I had flashed a Rom and it went bad. Long story short. No Loki causing boot into fastboot screen.
Tried using flash tools to restore stock with kdz. No good kept stopping at 49% because it was not the expected firmware.
The fix.
Wipe system in recovery then try again. With system wiped. The firmware matches and installs as expected.
Just wanted to share my experience. Maybe it will help someone else with the same problem.
Brian
Sent from my LG-D801 using Tapatalk
THANK YOU!!
I registered specifically so I could post here.
I was looking for ages trying to find a fix. Always getting stuck at that 49%. Back to normal now!
Thanks alot
cambuchan said:
I registered specifically so I could post here.
I was looking for ages trying to find a fix. Always getting stuck at that 49%. Back to normal now!
Thanks alot
Click to expand...
Click to collapse
Glad it was if help for you!
Sent from my LG-D801 using Tapatalk
What fixed it for my friend was "format data," as in internal storage as well.
Thank you!
h
cheami said:
What fixed it for my friend was "format data," as in internal storage as well.
Thank you!
Click to expand...
Click to collapse
Hi, sorry for my english , I'm french
I wanted to flash a custom rom on my LG G2 D802 .
I wanted the Paranoid Android (PA +) with 4.3 JellyBean .
So I made the
Backup
Wipe data / factory reset
Wipe cache partition
Wipe dalvik Cache
After I
Choose zip ( custom ROM ) from sd card
Then I
Reboot System Now
And turn on my laptop, I get an error message saying
[640 ] started Fastboot Mode
[ 690] udc start ()
I realized I had to flash AOSP kernel before changing to a ROM paranoid . But my kernel is blocked and so I have to go back to the stock ROM
When I did this tutorial using lg tools , flashing stops at 49% with an error message .
I also saw that I could access the recovery mod by following this link http://forum.xda-developers.com/showthread.php?t=2565904(but I saw that I could not otherwise reboot my phone after it was bricking ) and therefore flash my stock Rom which I had made the backup . But I do not know if the ROM has been saved and if it remained in my files after the Wipes.
If it is not there, is that in buying a micro USB ====> HUSB adapter, I could install a stock ROM from a USB key ? Or is there a way I can put files from my computer to my laptop which has no port micro sd?
And is what I could with my kernel "blocked " ?
Thank you very much
harryleplusfort said:
Hi, sorry for my english , I'm french
I wanted to flash a custom rom on my LG G2 D802 .
I wanted the Paranoid Android (PA +) with 4.3 JellyBean .
So I made the
Backup
Wipe data / factory reset
Wipe cache partition
Wipe dalvik Cache
After I
Choose zip ( custom ROM ) from sd card
Then I
Reboot System Now
And turn on my laptop, I get an error message saying
[640 ] started Fastboot Mode
[ 690] udc start ()
I realized I had to flash AOSP kernel before changing to a ROM paranoid . But my kernel is blocked and so I have to go back to the stock ROM
When I did this tutorial using lg tools , flashing stops at 49% with an error message .
I also saw that I could access the recovery mod by following this link http://forum.xda-developers.com/showthread.php?t=2565904(but I saw that I could not otherwise reboot my phone after it was bricking ) and therefore flash my stock Rom which I had made the backup . But I do not know if the ROM has been saved and if it remained in my files after the Wipes.
If it is not there, is that in buying a micro USB ====> HUSB adapter, I could install a stock ROM from a USB key ? Or is there a way I can put files from my computer to my laptop which has no port micro sd?
And is what I could with my kernel "blocked " ?
Thank you very much
Click to expand...
Click to collapse
It sounds like you have access to recovery, so you can use adb to push or pull files from your phone. Your backup should still be on your phone, as long as you didn't wipe the internal storage.
I'd suggest pulling the important photos/videos/backup/files/etc from your phone to your computer, then wiping internal storage or wipe factory reset. Then hopefully it wont get stuck at 49%, as that is what I did for my friend's D801 to allow it to go back to stock 100%.
Exactly what i keep telling people with the same issue, Just do a full wipe in cwm/twrp before restoring to stock. the problem is allot of them can't get into recovery :silly:
Thanks for sharing! Will be useful someday
Sent from my LG G2 using Tapatalk
Posted this problem in another thread but haven't had an answer so hoping this one will help, have a vs980 with B firmware, rooted and was running cm11 Sat I installed rayglobe Rom ported to vs980 after running it for a few hours I decided to install twrp then I was gonna try phills recovery cause I was used to it, I installed freegee from the market and it ran a check and sshowed me the recoveries available for my phone, the short version is for some reason it read my phone version as the rayglobe 802 firmware and I hit install not realizing it wasn't. Reading vs980 now I have no recovery, flash tool does not work ( says wrong phone) rayglobe runs perfect but all maps dealong with root sees a 802 phone. Anyone have a idea how to fix this?
Sent from my LG-D802 using Tapatalk
quinejh said:
Posted this problem in another thread but haven't had an answer so hoping this one will help, have a vs980 with B firmware, rooted and was running cm11 Sat I installed rayglobe Rom ported to vs980 after running it for a few hours I decided to install twrp then I was gonna try phills recovery cause I was used to it, I installed freegee from the market and it ran a check and sshowed me the recoveries available for my phone, the short version is for some reason it read my phone version as the rayglobe 802 firmware and I hit install not realizing it wasn't. Reading vs980 now I have no recovery, flash tool does not work ( says wrong phone) rayglobe runs perfect but all maps dealong with root sees a 802 phone. Anyone have a idea how to fix this?
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
Edit your build.prop to the correct device and install the correct recovery
Sent from my LG-D802 using Tapatalk
No clue how to do that can u use Rom manager app to do that?
Sent from my LG-D802 using Tapatalk
quinejh said:
No clue how to do that can u use Rom manager app to do that?
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
Search is your friend, any app that can edit the build prop should work, please make a backup of your build prop. if you get it wrong your device will not boot.
Ok I found a thread on here about how to use file explorer to change the build prop it says there r 2 entries I need to change but my question is do I change it from d802 to vs980 or vs980b?
Sent from my LG-D802 using Tapatalk
leomd333 said:
Exactly what i keep telling people with the same issue, Just do a full wipe in cwm/twrp before restoring to stock. the problem is allot of them can't get into recovery :silly:
Click to expand...
Click to collapse
Well I could get into recovery but it did not fix the problem.
Please explain!
bri315317 said:
I just want to share my experience after a bad flash and no way to recover.
I was still able to get to TWRP. I had flashed a Rom and it went bad. Long story short. No Loki causing boot into fastboot screen.
Tried using flash tools to restore stock with kdz. No good kept stopping at 49% because it was not the expected firmware.
The fix.
Wipe system in recovery then try again. With system wiped. The firmware matches and installs as expected.
Just wanted to share my experience. Maybe it will help someone else with the same problem.
Brian
Sent from my LG-D801 using Tapatalk
Click to expand...
Click to collapse
I have same problem with my F320L. I will try your method but please explain bit more that how should i do?
In twrp, first hard reset and then do full wipe (all wipe except internal memory and do not format any thing) or describe the way please?
Thanks!
bri315317 said:
I just want to share my experience after a bad flash and no way to recover.
I was still able to get to TWRP. I had flashed a Rom and it went bad. Long story short. No Loki causing boot into fastboot screen.
Tried using flash tools to restore stock with kdz. No good kept stopping at 49% because it was not the expected firmware.
The fix.
Wipe system in recovery then try again. With system wiped. The firmware matches and installs as expected.
Just wanted to share my experience. Maybe it will help someone else with the same problem.
Brian
Sent from my LG-D801 using Tapatalk
Click to expand...
Click to collapse
When i go to recovery mode i only have function Factory reset...
Can you help me please ?