well I have defy green lense... I just flash miui pikachu edition, It was working fine then last night I'd just flash another JB ROM that was working fine... but when I again try to flash pikachu ROM it was stuck on motorola M logo no blue LED turn on ....after that I flash a fixed sbf "4.5.3-109-fixed.sbf" this one....
the problem is same no blue LED turn on ... Please let me know how I can get CMW again .. step by step procedure needed. Thanks!
Note: I was using GB kernel 3.4.7
Your 2ndinit got wiped, hence no blue LED. If you can boot into the stock ROM, you need to root it and install 2ndinit apk(just search for 2ndinit defy on Google) and install your custom recovery again. After this you will get the blue LED again
Sent from my MB526 using xda premium
thekguy said:
Your 2ndinit got wiped, hence no blue LED. If you can boot into the stock ROM, you need to root it and install 2ndinit apk(just search for 2ndinit defy on Google) and install your custom recovery again. After this you will get the blue LED again
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
I cant boot into stock ROM, phone stuck on motorola M logo..... Can I flash full sbf again, coz I was on fixed GB sbf?
slhysf said:
I cant boot into stock ROM, phone stuck on motorola M logo..... Can I flash full sbf again, coz I was on fixed GB sbf?
Click to expand...
Click to collapse
Get into stock recovery by keeping volume down pressed when powering the phone.
When you see a triangle with excl. mark press volume down and up at the same time
Wipe data and cache
If above doesn't work flash proper full sbf and repeat the procedure
You're stuck on red logo as you have not wiped data from stock recovery, and instructions are /\
Sent from my MB526 using xda premium
Related
Hello guys !
I have a problem, i have an european (french) motorola milestone 2, i have this stock firmware "MILS2_U6_4.1-22" and i have rooted the phone with DoomLorD and i have install droidbootstrap, go into recovery of the droidbootstrap, flashed bootmenu 0.86, go into custom recovery with bootmenu, flash cyanogen mod (http://forum.xda-developers.com/showthread.php?t=1239778), did a wipe data and cache, reboot the phone, have picture (rayman's rabbit and blue logo motorola) and have black screen after this picture, can't go in boot menu (haven't got a blue led). Somebody can help me ?
PS : Sorry for my english.
Hold camera+vol down to boot into bootloader and then flash stock SBF (http://and-developers.com/sbf:milestone2) via RSDLite.
I have already done, so i can't put cyanogen 7.1 v1.3 in my phone ? May be it's the bootmenu ? I set i to default boot to normal, help me please.
It should be set to boot via 2nd-init. You need to flash fixed-sbf from the CM7 post. There should be a link for that in the same post or thread.
edit: I am guessing you are on Official GB.
Sent from my MotoA953 using XDA App
Yes i'm on official gingerbread, it's a problem ?
I have tried to put the default boot on 2nd-init and i have no boot already (black screen after the rabbit and motorola logo)
What can i do ??
Flash fixed-sbf using RSDLite. That's the complete install process for GB CM7 on GB kernel.
After applying the zip file you have to apply fixed-sbf from Endless7's CM7 thread. And if it does not boot after that try a data wipe.
Sent from my MotoA953 using XDA App
Thank's a lot, i have not flashed the fixed sbf after flashing the zip file (cyanogen), after flashed the fixed sbf the phone reboot corectly, thank's !
I am running cm10 JB 526 Red.
I rebooted my phone and instead on 2ndinit another bootloader was there (android BootMenu v0.6.1) no matter what i try to do it wont boot past google logo now.
Where do i start?
Wipe data from stock recovery
Sent from my MB526 using xda premium
(i read many threads relating my issue but they were not same, they was little difference in the problem. and i also tried there solutions but no improvement. so i decided to ask in a thread)
i was using defy+ with CM7 rom.
I installed this rom on my defy+
http://forum.xda-developers.com/showthread.php?t=2044797
first it booted and was working but after rebooting it resulted in boot loop .
( it shows Motorola sign then shows rom animation within few seconds is resumes rom animation and it keeps repeating animation.)
i waited for it an hour but is didn't go well.
then i tried restoring my old rom using CWM but i was unable to restore it is also resulted in same...
then i tried installing sdf using rsd but i have no improvement....
Now i can only go to bootloader version 09.1 and i says battery is low , can't program . i put the charger for whole night but i still says battery low can't program
can you please help me solving this problem
After installing that Rom you needed to enter boot menu and format data to ext4. Now, if you're unable to flash any sbf due to low battery then refer here: http://forum.xda-developers.com/showthread.php?t=892026
Or if you have access to another defy then use its battery and flash the sbf. Wipe data from stock recovery if you run into any issues after sbf flash
As stated below dalvik cache should be wiped, and data is automatically wiped when you format it to ext4 as stated above
Sent from my MB526 using xda premium
thekguy said:
After installing that Rom you needed to enter boot menu and format data to ext4. Now, if you're unable to flash any sbf due to low battery then refer here: http://forum.xda-developers.com/showthread.php?t=892026
Or if you have access to another defy then use its battery and flash the sbf. Wipe data from stock recovery of you run into any issues after sbf flash
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
Or in other words you need to wipe data/cache and dalvik BEFORE and AFTER flashing the custom ROM (neagan or other). For now charge the battery and do the sbf flash. Pay attention at the "optional" indications. It better to do it.
CWM is missing
using your link i can solve the problem
but i dont have CWM so i cant wipe delvik data/cach
i only have bootloader
i only can go to bootloader and can't do any thing else. because CWM is removed.
tell me if you have any information about to do something using bootloader..
Do it from stock recovery, data wipe and cache wipe
Sent from my MB526 using xda premium
From stock recovery (bootloader) you will format as ext3 but is better to format in ext4 and that can be done from custom recovery. For that you have to install 2init and run it.
He's unable to boot...boot loop was before battery issue
Sent from my MB526 using xda premium
thekguy said:
He's unable to boot...
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
Yes because of low battery. Software solution is ... after charging.
where is stock recovery??
how to boot in stock recovery??? sorry I dont know if there any stock recovery is existed...... ( i tried different buttons while Motorola sign but i got nothing except bootloader and download mod)
tell me i think i can do it using stock recovery
because there is no problem in bootloader. even i am able to flash new SDF.
it makes trouble in loading ROM....
what do you think?
battery is working now
thekguy said:
He's unable to boot...boot loop was before battery issue
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
i solved this problem using universal charger. i pulled off the battery and put in universal charger and charged it for two hours.
stock recovery?
now i just need to know how to boot in stock recovery???
AW: [Q] Defy+ not loading any rom.
There is a beginner guide anywhere in xda/defy sektion
You should read it
MB525 red lense
stock recovery?
i just need to now how to go into stock recovery?
How do I enter Recovery Mode?!: With the Phone off press VOLUME DOWN then, while still pressed, power up the phone and leave VOL key pressed until you see a Yellow triangle, once you see this you are in Recovery now press Vol Up and Vol Down at the same time (if you are in Froyo) and the menu will appear, if you are on Éclair the menu should appear without having to press anything.
copy/paste from this thread.
thanks
Thanks bros
I recovered my phone and i is running with CM7 and i am not gonna try CM10 again until it comes with all bug fixes..
thanks again for your help..
I started using my milestone 2 from stock (Argentina) froyo, then updated to CM7, then after some time started using CM10.
Now after some time, I wished to revert to CM7. I rebooted into recovery and flashed CM7 and Gapps, but got stuck in red Motorola logo when booting up. What should I do? Follow the downgrade instructions posted here in xda?
Thanks in advance!
fischer22 said:
I started using my milestone 2 from stock (Argentina) froyo, then updated to CM7, then after some time started using CM10.
Now after some time, I wished to revert to CM7. I rebooted into recovery and flashed CM7 and Gapps, but got stuck in red Motorola logo when booting up. What should I do? Follow the downgrade instructions posted here in xda?
Thanks in advance!
Click to expand...
Click to collapse
Wipe data/factory reset in stock recovery.
Lean946 said:
Wipe data/factory reset in stock recovery.
Click to expand...
Click to collapse
You mean pressing X and power when booting? It doesnt work, I dont get the exclamation mark, only the red motorola logo.
If I press volume down when booting (blue led) I can access the android bootmenu, and from there custom recovery (clockworkmod).... but when I choose for example Stock recovery (from the android bootmenu) I get just the rred moto logo, nothing else...
Any ideas?
Thanks again.
fischer22 said:
I started using my milestone 2 from stock (Argentina) froyo, then updated to CM7, then after some time started using CM10.
Now after some time, I wished to revert to CM7. I rebooted into recovery and flashed CM7 and Gapps, but got stuck in red Motorola logo when booting up. What should I do? Follow the downgrade instructions posted here in xda?
Thanks in advance!
Click to expand...
Click to collapse
latest CM7 build does not contain kernel and you have wrong kernel. if your bl=2 you need to flash one of the previous builds and then latest or flash only this kernel. if your bl=3 you need revert to stock, then downgrade and flash rom (maybe kernel too). I tested it for bl2 and also bl3.
fischer22 said:
You mean pressing X and power when booting? It doesnt work, I dont get the exclamation mark, only the red motorola logo.
If I press volume down when booting (blue led) I can access the android bootmenu, and from there custom recovery (clockworkmod).... but when I choose for example Stock recovery (from the android bootmenu) I get just the rred moto logo, nothing else...
Any ideas?
Thanks again.
Click to expand...
Click to collapse
If you can get to the bootmenu you can go to the custom recovery and wipe data from there too.
oh yeah !!that all right
thank you !!
hackerc5 said:
thank you !!
Click to expand...
Click to collapse
You don't need to say "thank you", just click the Thanks button
this is what i've done,
i flashed a dfp-125 sbf on my mb526.
all worked well, even when i restored apps with titanium backup,
what i missed is only an rtl fix, so i enter the custom recovery the yellow one, and wiped cache and dalvik and then install my rtl that i found.
my phone didnt come up from m logo so i did a factory reset from the custom and tried and nothing.
then from stock recovery and now it wont come uponly the white led.
every sbf that i tried is giving my passd but wont turn on te device.
is there any hope for my?
Flash a more recent sbf. As a last resort try dfp231, which should get your phone to atleast the red Motorola logo. Then wipe data and cache from stock recovery
Sent from my MB526 using Tapatalk 2
thekguy said:
Flash a more recent sbf. As a last resort try dfp231, which should get your phone to atleast the red Motorola logo. Then wipe data and cache from stock recovery
Sent from my MB526 using Tapatalk 2
Click to expand...
Click to collapse
tnx
tried that, i flashed an asian sbf becoz of the rtl, i found hebrew on it.
now i have a rooted sbf+hebrew with all my apps on it.
its what i wanted the first place!
if i want to make it a fixed sbf for hebrew and upload it to this foum, how do i do it?
i want to help the others
You can make a fixed sbf by making a system.img of your current setup, and using the sbf tools to replace the existing one with yours. Search for those tools, and read up the guide
Sent from my MB526 using Tapatalk 2