Hello guys !
I have a problem, i have an european (french) motorola milestone 2, i have this stock firmware "MILS2_U6_4.1-22" and i have rooted the phone with DoomLorD and i have install droidbootstrap, go into recovery of the droidbootstrap, flashed bootmenu 0.86, go into custom recovery with bootmenu, flash cyanogen mod (http://forum.xda-developers.com/showthread.php?t=1239778), did a wipe data and cache, reboot the phone, have picture (rayman's rabbit and blue logo motorola) and have black screen after this picture, can't go in boot menu (haven't got a blue led). Somebody can help me ?
PS : Sorry for my english.
Hold camera+vol down to boot into bootloader and then flash stock SBF (http://and-developers.com/sbf:milestone2) via RSDLite.
I have already done, so i can't put cyanogen 7.1 v1.3 in my phone ? May be it's the bootmenu ? I set i to default boot to normal, help me please.
It should be set to boot via 2nd-init. You need to flash fixed-sbf from the CM7 post. There should be a link for that in the same post or thread.
edit: I am guessing you are on Official GB.
Sent from my MotoA953 using XDA App
Yes i'm on official gingerbread, it's a problem ?
I have tried to put the default boot on 2nd-init and i have no boot already (black screen after the rabbit and motorola logo)
What can i do ??
Flash fixed-sbf using RSDLite. That's the complete install process for GB CM7 on GB kernel.
After applying the zip file you have to apply fixed-sbf from Endless7's CM7 thread. And if it does not boot after that try a data wipe.
Sent from my MotoA953 using XDA App
Thank's a lot, i have not flashed the fixed sbf after flashing the zip file (cyanogen), after flashed the fixed sbf the phone reboot corectly, thank's !
Related
hello,
is it possible to switch from cm7.1-nightly to ms2ginger easily?
(cm7.1 is android v. 2.3.7 with kernel 2.32.9)
regards
Yes you can do that easily. The ms2Ginger thread has enough information on how to do that. I have switched twice from Cm7 to ms2g and vice versa.
In a nut shell just restore the manseoid back up of ms2g system, data, boot , dev tree and recovery. Before you do this just take nandroid backup of your current cm 7, which can be useful to switch back at later time if needed.
Sent from my MB526 using XDA App
ok. after installing ms2ginger it seem to be not my flavour.
i tryed to install cm72 (120131.05331-nightly) by epsylon. now, the device boots up, lights blue and green up and nothing more happens..
what can i do? (got backup but want a fresh install)
regards
now, when i push the poweron button, nothing happens..
the led lits up, when usb plugged in.. but thats all..
help?
_xo said:
now, when i push the poweron button, nothing happens..
the led lits up, when usb plugged in.. but thats all..
help?
Click to expand...
Click to collapse
CM7.2 is for Defy+ which uses GB kernel.
You can either flash CM7 kernel if it works, otherwise go to advance restore and restore boot and devtree from MS2 nandroid.
hey guyz need some help here.i own a defy+. i dont noe why but when i tried to install the walter9 MS2Ginger over the CM7.2,i got the bootloader err msg and the phone wouldnt startup.then i flashed the 2.3.6 sbf file via rsdlite and phn was back to its original working condition.then i rooted it again and then again tried MS2Ginger but after installation in recovery it asks for reboot.and after reboot, i got the same error saying
the same thing again
Bootloader
09.10
Err:A5,70,00,0023
again had to flash to original sbf
need help
coolgame said:
hey guyz need some help here.i own a defy+. i dont noe why but when i tried to install the walter9 MS2Ginger over the CM7.2,i got the bootloader err msg and the phone wouldnt startup.then i flashed the 2.3.6 sbf file via rsdlite and phn was back to its original working condition.then i rooted it again and then again tried MS2Ginger but after installation in recovery it asks for reboot.and after reboot, i got the same error saying
the same thing again
Bootloader
09.10
Err:A5,70,00,0023
again had to flash to original sbf
need help
Click to expand...
Click to collapse
Are you installing MS2G 2.1? and Did you follow the complete restore of nandroid backup, - system, data, boot, devtree and recovery?
yup i did twice.
coolgame said:
hey guyz need some help here.i own a defy+. i dont noe why but when i tried to install the walter9 MS2Ginger over the CM7.2,i got the bootloader err msg and the phone wouldnt startup.then i flashed the 2.3.6 sbf file via rsdlite and phn was back to its original working condition.then i rooted it again and then again tried MS2Ginger but after installation in recovery it asks for reboot.and after reboot, i got the same error saying
the same thing again
Bootloader
09.10
Err:A5,70,00,0023
again had to flash to original sbf
need help
Click to expand...
Click to collapse
I am searching for the instructions too:
http://forum.xda-developers.com/showthread.php?t=1468867&page=2
Will work the ms2ginger with cg version 6?
Anyone?
I had managed to get working, with instruction in the ms2ginger topic
To begin:
Put the Nandroid backup folder MS2Ginger on the SDCard in this folder: /sdcard/clockworkmod/backup
Root your DEFY and Install BOOTMENU - CWM (2ndInit-Installer 2.0.apk - install 1.0.7) or use this SndInitDefy_2.0.apk
REBOOT
run 2nd-init (voldown on blue LED)
wipe data and cache in "Stable/Custom - Recovery"
Go to "Recovery"
Go to "Latest Recovery"
Go to "Backup and Restore"
Go to "Restore" (system+data)
reboot.
Booting up can take a while, max is about 10 minutes.
THEN(if you want to try also the 3.0)
wipe data/cache/dalvik; Do an advanced recovery and only restore system and data from 3.0NG.
Hi, i have defy+ (mb526)
android version: 2.3.7
kernell: 2.6.32.9-gb08c3c8
cyanogenMod-7.1..0-jordan
Gingerbread GWK74
I want to flash CM 7.2 (http://forum.xda-developers.com/showthread.php?t=1445259) but after flash rom, I stuck on boot logo, i wait 30minut, reboot, wait, reboot... but without succes.
You must delete the user data of your previous rom first. Go to CWM Recovery and choose 'wipe data/factory reset'. This will remove all your user data (apps, app data, settings etc.) so you should have a backup if you want to keep the data!
i try this, but without succes. I'am still on boot logo (google) :-(
Dobre den,
There is something wrong in your phone setting : the kernel you mention in your first post (2.6.32.9-gb08c3c8) is a Froyo kernel and your phone (MB526) has a GB bootloader who only accept GB kernel...
So I think the best for you is to flash a full GB SBF via RSDLite before flashing the CM 7.2 Defy+.
Nashle...;-)
This has happened to me... A LOT. the way i fixed it was to redownload CM7 from the pc, because something went wrong the first time.
mankymoo said:
This has happened to me... A LOT. the way i fixed it was to redownload CM7 from the pc, because something went wrong the first time.
Click to expand...
Click to collapse
Your phone is a Defy or a Defy+ ? because I'm not sure you help a lot with this kind of answers.
Thanx, after flash ful SBF GB via RSDlite, everything is OK
I have q defy, however the filestructure is almost exactly the same and a fresh install of anything is the key (usually) to fix any problem... therefore I tend to ask them to do that before anything else
Sent from my MB525 using XDA App
stuck on bootlogo
i have defy+ (stock 2.3.6 - 4.5.1-134_DFP-1321)
rooted & flashed Quarx's 3 Mach ICS CM9 nightly..
i tried to update that but i guess i flashed some wrong zip in recovery & phone showed some bootloader error..
so i flashed full sbf via RSDlite to return to my stock rom..after flashing is complete, rsdlite reboots my phone, phone is stuck on motorola bootlogo & rsdlite shows "please manually powerup this phone"..still connected to usb..even when i disconnect phone from usb, phone keeps rebooting & stuck on bootlogo..
update
clearing data/cache in stock recovery solved the problem..back on CM9
well I have defy green lense... I just flash miui pikachu edition, It was working fine then last night I'd just flash another JB ROM that was working fine... but when I again try to flash pikachu ROM it was stuck on motorola M logo no blue LED turn on ....after that I flash a fixed sbf "4.5.3-109-fixed.sbf" this one....
the problem is same no blue LED turn on ... Please let me know how I can get CMW again .. step by step procedure needed. Thanks!
Note: I was using GB kernel 3.4.7
Your 2ndinit got wiped, hence no blue LED. If you can boot into the stock ROM, you need to root it and install 2ndinit apk(just search for 2ndinit defy on Google) and install your custom recovery again. After this you will get the blue LED again
Sent from my MB526 using xda premium
thekguy said:
Your 2ndinit got wiped, hence no blue LED. If you can boot into the stock ROM, you need to root it and install 2ndinit apk(just search for 2ndinit defy on Google) and install your custom recovery again. After this you will get the blue LED again
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
I cant boot into stock ROM, phone stuck on motorola M logo..... Can I flash full sbf again, coz I was on fixed GB sbf?
slhysf said:
I cant boot into stock ROM, phone stuck on motorola M logo..... Can I flash full sbf again, coz I was on fixed GB sbf?
Click to expand...
Click to collapse
Get into stock recovery by keeping volume down pressed when powering the phone.
When you see a triangle with excl. mark press volume down and up at the same time
Wipe data and cache
If above doesn't work flash proper full sbf and repeat the procedure
You're stuck on red logo as you have not wiped data from stock recovery, and instructions are /\
Sent from my MB526 using xda premium
Hello guys, unfortunately my defy + with CM 10.1 does not work since I installed TWRP Recovery 2.6.3.0, I also lost the ClockworkMod recovery, and so I can not restore my copy CM 10.1, the phone is not charging (it is now only 25 %) ask for help.
If your phone don't boot
Charge battery with external charger
Flash .sbf firmware
Wipe data in stock recovery....
Reboot
Root
Install recovery
Restore nandroid
Be happy again
If it's boot
Copy system/bootmenu folder from
extracted nightly .zip file (last you've uesed and paste it on the rigth place using adb or rootexplorer
Sent from my MB525 red , froyo 2.2.2 german blurless service.sbf, as stock rom
thanks Bone for the answer, what is the right place to copy system / bootmenu?
I could try with the TWRP Recovery file manager
If you're have working twrp you can flash cwm recovery.zip or flash rom which contains cwm recovery
Sent from my MB525 red , froyo 2.2.2 german blurless service.sbf, as stock rom
thanks bone, I flashed CM 11 with TWRP recovery and everything went well, I'll try this rom and then after I will do a restore of the CM10
you can not completely kill our defy as our bootloader is locked...
iAjayIND said:
you can not completely kill our defy as our bootloader is locked...
Click to expand...
Click to collapse
It is hard to kill but it's possible....
Throw in from 10m to asphalt ground,,
Over roll it with an airplain
Pull usb cable during sbf flash in the moment when rsd flashes the bootloader partition
Cheers
Sent from my MB525 red , froyo 2.2.2 german blurless service.sbf, as stock rom
mb 525 not powering after flashing.. i am only getting white light while connecting usb cable..please help any solution
Hi!
My defy green lens was on cm7.
I wanted to go to cm11...
However now my phone does not boot and i want to flash. I don't know much about this things so I red forums. Now I want to know which sbf file i must download.
Thank you and Sorry for my bad english
Sent from my Nexus 4 using XDA Free mobile app
First follow the instructions in this guide listed in "Common Problems/Questions" section.
This is what helped me:
Method 1:
Download this SBF and Flash it
Do a factory reset
Root your Phone
Download 2nd Init 1.4.2 and Install ClockworkMod Recovery
Download and install this Nandroid Backup << File is Back, thanks Ichibanme again!>>
Enter Recovery, Wipe Data/Cache
After wiping, turn off your phone
Turn it on and get immediately into Bootloader mode
Flash this Fixed SBF
Delete Data/Cache again and reboot.
Then follow this guide [GUIDE][FAQ][Android 4.4 KitKat] Installing & Customizing CM11 or SlimKat
another possibility for non BL7 stock
- or you can flash this sbf
or this sbf which are both froyo stock
- root it using this one on Windows
- install cwm with 2nd Init 2.3 apk
- and at least flash twrp 2.6.3.0 which is necessary to get cm 11 boot because of SElinux support
!!! after flashing twrp u need to reboot to recovery again and flash rom right away !!! otherwise it won't boot
this helped me to get rid of it