Database Users

odin flash philz_touch_6.15.4-jflteatt.tar.md5 failing

for the life of me i can't get it to work. keeps failing. i've tried odin3 3.04, 3.06, 3.09 without success. both philz_touch_6.09 and philz_touch_6.15.4-jflteatt.tar.md5
att galaxy s4 i337 unrooted
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.15.4-jflteatt.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> recovery.img
<ID:0/010> NAND Write Start!!
<ID:0/010>
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

What is your bootloader version? If it is higher than MDL, I think you are out of luck.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app

Unsure. Can you tell from the following ??
Sent from my SAMSUNG-SGH-I337 using xda app-developers app

egiblock said:
Unsure. Can you tell from the following ??
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Looks like you are on nb1. You can't use custom recovery. All you can do is downgrade to mk2 and use safestrap
Sent from my GT-I9505G using Tapatalk

well that isn't going to be much fun right now..
thanks for the info

[Q] How bad is my soft brick?

I have posted to this thread before and am very thankful for the help provided.
Now, I have been doing LOTS of reading on unbricking a soft bricked GS4 from AT&T but have no luck.
I have read that unbricking a soft bricked phone is usually a piece of cake, but I guess I'm just really unlucky :crying:
I have tried many methods, from wiping data in recovery, flashing stock roms, and so on, but haven't really succeeded with any method.
Just now, I wiped/formatted the cache and data in recovery one more time, made sure my battery was at 100%, and flashed a
stock firmware in Odin 3.09 using this guide: http://forum.xda-developers.com/showthread.php?t=2265477
The end result was as follows:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have no idea what I'm doing wrong. Can anyone tell from the messages above?
Thanks a lot for any help!​

Your phone is higher than the amdl bootloader. You will need to try the mk2 or higher tar package. I think they might be linked in the general section.
Sent from my Nexus 7 using XDA Premium 4 mobile app

Red_81 said:
Your phone is higher than the amdl bootloader. You will need to try the mk2 or higher tar package. I think they might be linked in the general section.
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
So flashing an MK2 or NB1 tar in Odin should fix it?

Yep. Remember you will be back to full stock, no root.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app

[q] at&t s4 nc1 help

Ok so im not sure this is where to post this but I'll give it a try. I had a rooted galaxy s4 running NC1 update. I wanted to unroot it and set it back to stock so i can give it to a family member. I followed a guide that told me to flash the NB1 firmware and update to NC1, so i put the phone in download mode and opened ODIN and selected the NB1 tar file, right after i started it there was some text going on on the left of the screen, and after it said something like "boot.img" (I'm not sure what it exactly said but it started with boot.something) it gave an error and odin said it failed. I tried starting the phone up and it said that the firmware update was interrupted and to plug it into kies. I tried following the emergeny firmware update and it wouldn't go through. On the top left of the screen on my S4 it says:
ODIN MODE
PRODUCT NAME: SGH-I337
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRENTY VOID: 0x0
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: Enabled
eMMC BURST MODE: enabled
If anyone can help I would be eternally gratefull, I'm not very android savy yet and i have absolutly no idea on how to fix this.
-Rob

Put the phone in download mode and re-attempt the NB1 flash through Odin. As long as the download mode exists, the phone can be recovered.

jmjoyas said:
Put the phone in download mode and re-attempt the NB1 flash through Odin. As long as the download mode exists, the phone can be recovered.
Click to expand...
Click to collapse
Can you provide me a link to the correct file i should try flashing to it? I do not know if it would make a difference but it was running 4.4.2.

Robbyzbot said:
Can you provide me a link to the correct file i should try flashing to it? I do not know if it would make a difference but it was running 4.4.2.
Click to expand...
Click to collapse
Re flash to NB1 firmware using Odin. The you're back to stock not rooted.
Sent from my SGH-I337 using XDA Free mobile app

thebestiam said:
Re flash to NB1 firmware using Odin. The you're back to stock not rooted.
Sent from my SGH-I337 using XDA Free mobile app
Click to expand...
Click to collapse
I want to get back to stock, do you have a link to the file i should flash?

Robbyzbot said:
I want to get back to stock, do you have a link to the file i should flash?
Click to expand...
Click to collapse
In the general forum
http://forum.xda-developers.com/showthread.php?p=50912149
Sent from my Nexus 5 using XDA Free mobile app

jd1639 said:
In the general forum
http://forum.xda-developers.com/showthread.php?p=50912149
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Should i flash the stock odin tar or the rootable stock odin tar? Do i need the system dump file?

jd1639 said:
In the general forum
http://forum.xda-developers.com/showthread.php?p=50912149
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
I already downloaded that file and i just tried it again, here is what odin says:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_ATT_I337UCUFNB1_I337ATTFNB1_505595_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any ideas?

Robbyzbot said:
I already downloaded that file and i just tried it again, here is what odin says:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_ATT_I337UCUFNB1_I337ATTFNB1_505595_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any ideas?
Click to expand...
Click to collapse
Try different usb ports, the ones in the back of a pc. Odin can be finicky
Sent from my Nexus 5 using XDA Free mobile app

jd1639 said:
Try different usb ports, the ones in the back of a pc. Odin can be finicky
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Thank you so much that was my problem, my phone is fixed! You are a life saver!

Robbyzbot said:
Thank you so much that was my problem, my phone is fixed! You are a life saver!
Click to expand...
Click to collapse
no problem, glad you got it fixed
Sent from my Nexus 5 using XDA Free mobile app

Help! Can't revert back to stock!

Hellos,
I'm noob and recently rooted and installed a custom recovery my S4 in attempt to install Cyanogenmod. This was after the last update by At&t and the bootloader doesnt let the recovery (TWRP) boot. This was before I heard that Att added a boot loader. I have tried many methods to return to stock but all have failed because of the bootloader. Any way to remove and return to stock or perhaps unlock the bootloader?
I tried Odin with the correct firmware I needed. This is what I got.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337MUMUFNE3_I337MPCTFNF1_I337MUMUFNE3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can Anyone help?

If you have an AT&T i337 then Odin the nb1 tar file. See this http://forum.xda-developers.com/showthread.php?p=56453100
Sent from my Nexus 9 using XDA Free mobile app

jd1639 said:
If you have an AT&T i337 then Odin the nb1 tar file. See this http://forum.xda-developers.com/showthread.php?p=56453100
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
Sorry for being a noob but which one should I follow if I want to revert to factory? I have NL1.

systemglytch said:
Sorry for being a noob but which one should I follow if I want to revert to factory? I have NL1.
Click to expand...
Click to collapse
You need to flash the nb1 tar. Either is ok. Then ota back to nl1
Sent from my Nexus 9 using XDA Free mobile app

[q] i337 bootloader i9505 rom

When I go to ODIN mode my PRODUCT NAME IS I337. However when i go to the about section in settings it says I9505. The phone is from China and I have rooted it I want to install a rom on this (5.0 prefferably maybe stock). Please help out also when I try to OTA update it says AT&T and no new update while its on 4.3.
Please help

If its running a custom or none stock ROM the about section will show wrong. I would remove the battery see what it says and Odin that firmware from sammobile. Sounds like you have a i337 running international variant of the rom. If it does say i337 don't do anything above MDL.

n007w said:
When I go to ODIN mode my PRODUCT NAME IS I337. However when i go to the about section in settings it says I9505. The phone is from China and I have rooted it I want to install a rom on this (5.0 prefferably maybe stock). Please help out also when I try to OTA update it says AT&T and no new update while its on 4.3.
Please help
Click to expand...
Click to collapse
Whatever it says in download mode is probably true. Go to the system and install terminal emulator and type getprop ro.bootloader and reply with what it says (at least the last 3 characters)

DeadlySin9 said:
Whatever it says in download mode is probably true. Go to the system and install terminal emulator and type getprop ro.bootloader and reply with what it says (at least the last 3 characters)
Click to expand...
Click to collapse
bro I cant turn the phone on anymore when i turn it on it goes to SAMSUNG GALAXY S4 logo then turns off. I can get to download and stock recovery though. I done a /wipe data factory reset and /wipe cache partition. Could you please help me out maybe I can odin flash or..

BehrendsTech said:
If its running a custom or none stock ROM the about section will show wrong. I would remove the battery see what it says and Odin that firmware from sammobile. Sounds like you have a i337 running international variant of the rom. If it does say i337 don't do anything above MDL.
Click to expand...
Click to collapse
I cant turn it on now read my reply to another user please

n007w said:
I cant turn it on now read my reply to another user please
Click to expand...
Click to collapse
I'd say just find and flash the NB1 ODIN tar file from the general section then. Either find the thread for it or check the [INDEX] thread.

The boot loop is a soft brick most of the time you'll need to Odin it to get it to boot. I'd try MDL if it boot loops still that means your on a newer version you'll need to flash the newer tar file.

DeadlySin9 said:
I'd say just find and flash the NB1 ODIN tar file from the general section then. Either find the thread for it or check the [INDEX] thread.
Click to expand...
Click to collapse
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I337UCUEMK2_1921628_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
After Uninstalling Kies
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I337UCUEMK2_1921628_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> recovery.img
<ID:0/004> persdata.img.ext4
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!

n007w said:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I337UCUEMK2_1921628_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
After Uninstalling Kies
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I337UCUEMK2_1921628_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> recovery.img
<ID:0/004> persdata.img.ext4
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
Click to expand...
Click to collapse
Flash the nb1 tar as suggested, http://forum.xda-developers.com/showthread.php?p=50912149
You're flashing mk2
Sent from my Nexus 5 using XDA Free mobile app

jd1639 said:
Flash the nb1 tar as suggested, http://forum.xda-developers.com/showthread.php?p=50912149
You're flashing mk2
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks will I need a PIT

n007w said:
Thanks will I need a PIT
Click to expand...
Click to collapse
No. Just flash the .tar.md5 file in the AP slot.
Sent from my Nexus 5 using XDA Free mobile app

jd1639 said:
Flash the nb1 tar as suggested, http://forum.xda-developers.com/showthread.php?p=50912149
You're flashing mk2
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
I was on Jellybean before will it be ok to flash nb1. Also I am waiting for the download

n007w said:
I was on Jellybean before will it be ok to flash nb1. Also I am waiting for the download
Click to expand...
Click to collapse
Yes, it'll update the bootloader too but you can still root nb1 and you'll still need to use safestrap as your custom recovery so no harm will be done.
Sent from my Nexus 5 using XDA Free mobile app

jd1639 said:
Yes, it'll update the bootloader too but you can still root nb1 and you'll still need to use safestrap as your custom recovery so no harm will be done.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks man you are the best you know even Samsung couldnt fix it. I cant thank you enough but one more favour, how can I get it to 5.0 lollipop theres no OTA update.

n007w said:
Thanks man you are the best you know even Samsung couldnt fix it. I cant thank you enough but one more favour, how can I get it to 5.0 lollipop theres no OTA update.
Click to expand...
Click to collapse
Give it some time and it should ota. The otas roll out in cycles so it might even be a day or two.
Sent from my Nexus 5 using XDA Free mobile app

jd1639 said:
Give it some time and it should ota. The otas roll out in cycles so it might even be a day or two.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
I am in the UK so I wont recieve an AT&T OTA so is there an Odin Flash for it

n007w said:
I am in the UK so I wont recieve an AT&T OTA so is there an Odin Flash for it
Click to expand...
Click to collapse
No, there is not at this point.
Sent from my Nexus 5 using XDA Free mobile app

jd1639 said:
No, there is not at this point.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Sincerely apologize for annoying you but can you give me a prediction of when it will be released.

n007w said:
Sincerely apologize for annoying you but can you give me a prediction of when it will be released.
Click to expand...
Click to collapse
I have no idea if our when it might be available. To can eye on this thread if it becomes available it'll be posted here, http://forum.xda-developers.com/showthread.php?p=53758227
Sent from my Nexus 9 using XDA Free mobile app

Bro, please help I managed to get the software etc. Now it turns off randomly sometimes