Related
Please tell me how to upgrade from
MAGLDR 1.11 to MAGLDR 1.13.
Thanks
Sent from my HTC HD2 using XDA App
Sent from my HTC HD2 using XDA App
Is it hard? No.
Download 1.13
Put your phone bootloader (tricolor screen)
Connect to pc
Run romupdate exe
Read onscreen guides, make choice
Done
Enjoy your new MAGLDR
Sent from my HTC HD2 using Tapatalk
Im doing that but on romupdate shows me error because my phone is not sync with mobile device centar, but that is imposimble because phone is flashed with android
Sent from my HTC HD2 using XDA App
boki_thegame said:
Im doing that but on romupdate shows me error because my phone is not sync with mobile device centar, but that is imposimble because phone is flashed with android
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
me too have the same problem
I solved that. First you need to install HTC Sync for all HTC Android Phones (i cant post hyperlinks if you want i will send you link via DM ) and after you will can to upgrade MAGLDR
You don't need to install anything, just turn off phone, then turn back on holding down volume down button until you see tri-colour bootloader.
At the bottom you will see the word serial then plug into PC, thenafter a few seconds you'll see it change to usb, then flash 1.13.
Hope this helps
Sent from my HTC HD2 using XDA App
You don't need ActiveSync.
The ROM Update Utility .exe will recognize and skip to step starting with the tricolored screen (hold vol down and power on). Ie. it will recognize your phone from there on.
You can do this to update anything from NAND Rom, Radio, MAGLDR etc. once you are no longer tied to Windows Mobile (activesync). The ROM updater skips those steps.
Did it just now.
does it erase the setup you have on your phone? or can you just upgrade with no issues?
I'm interested, too, if there's any data loss.
I read somewhere something that after upgrade the android needs to be flashed again.
builtboosted said:
does it erase the setup you have on your phone? or can you just upgrade with no issues?
Click to expand...
Click to collapse
Shivan149 said:
I'm interested, too, if there's any data loss.
I read somewhere something that after upgrade the android needs to be flashed again.
Click to expand...
Click to collapse
No, flashing from 1.11 to 1.13 does not result in data loss (normally - to be safe I'd suggest taking a backup though)
ClydeB1 said:
No, flashing from 1.11 to 1.13 does not result in data loss (normally - to be safe I'd suggest taking a backup though)
Click to expand...
Click to collapse
Thanks! So I can update without much work after the update.
Shivan149 said:
Thanks! So I can update without much work after the update.
Click to expand...
Click to collapse
So I did it and no problems!
does updating MAGLDR 1.11 to 1.13 make u lose ur warenty. And does someone know when there is gonna be a new MAGLDR 1.14(?) on the market and will this be better then 1.13?
warranty? I think you can reverse and go back to stock for warranty. you already lose your warranty once you flash hspl anyways.
Sent from my HTC HD2 using Tapatalk
magldr 1.11 to 1.13
I'm trying to update from magldr 1.11 to 1.13 but every time I run the ROM update utility I get "Error [260]: Connection" & "the Update Utility cannot connect to your PDA phone." I have the tri-color bootloader screen, as well as USB on it. I'm already running a NAND Froyo build, just trying to switch to Gingerbread. I've tried searching this forum & the web for help without any success. Any help would be appreciated, thanks!
Angelo
HI there so i bought a used HD2 wich came with ICS installed when it arrived i turned it on and loaded MAGLDR then it tried to load Android but got stuck at the GO GO GO! line. As i dont have any drivers installed and Windows doesnt recognize the HD2 in MAGLDR i cant flash a new rom. I wanted to do a Task 29 but that requires drivers too.
So my question is how do i perform a full wipe so i can get a working rom since the phone turns on, shows the TMobile splash screen then goes into Magldr and tries to boot android immediately then get sutck in GO GO GO!.
hold power button until magldr menu appear
in ad recovery you can wipe anything
Pentuni said:
HI there so i bought a used HD2 wich came with ICS installed when it arrived i turned it on and loaded MAGLDR then it tried to load Android but got stuck at the GO GO GO! line. As i dont have any drivers installed and Windows doesnt recognize the HD2 in MAGLDR i cant flash a new rom. I wanted to do a Task 29 but that requires drivers too.
So my question is how do i perform a full wipe so i can get a working rom since the phone turns on, shows the TMobile splash screen then goes into Magldr and tries to boot android immediately then get sutck in GO GO GO!.
Click to expand...
Click to collapse
good to know u want to start from scratch...u ll never know wats been put it that device... ....here is wat you can do
i had put out these steps in another thread to help out a fellow XDAian... try
files you need: (if you need pm me)
-task29
-Radio Leo 2.15.50.14
-DFT_LEO_MAGLDR113_DAF
-Recovery_150M_system_5M_cache
-rom zip (dont alter/extract zip if you done know wat to do with this)
do these: (from your current WP7 rom)
-restart device
-get into tricolor bootloader
-plug usb...hd2 should say 'USB'
-do a task 29
-get into bootloader again
-plug usb...hd2 should say 'USB'
-install radio by running 'CustomRUU.exe'
-get into tricolor bootloader
-plug usb...hd2 should say 'USB'
-run DAF.exe for installing MAGLDR
-reboot
-get into MAGLDR by holing power/end key while booting
-go to 'usb flasher' in the menu and press green/call button
-plug usb...hd2 should say 'USB'
-wait till it say 'wait usb...usb'
-get into your recovery folder
-run daf.exe
-reboot post completion
-get into MAGLDR by holing power/end key while booting
-get into ad-recovery
-get into mount storage
-activate usb mass storage
-now put the rom zip files into sd card
-press power to get back to recovery menu
-select install rom from sdcard
-choose rom file
-select install
this should typically install nandroid into your hd2...
if you face any issues, share the step and the error scenario/msg
I tried to get task29 but my PC doesn't recognize the hd2 even on bootloader.
Sent from my MB860 using xda premium
Edit: So i managed to get the drivers and got the phone recognized, so i performed task 29, worked perfectly. Followed the steps but when i try to install a radio it fails and gets stuck at 96%. I tried flashing the radio several times but no luck... What am i doing wrong?
It's better if you download the drivers because it's useful for later needs...
Best regards
Sam Razzy...
Sent from my HD2 using xda premium
Pentuni said:
Edit: So i managed to get the drivers and got the phone recognized, so i performed task 29, worked perfectly. Followed the steps but when i try to install a radio it fails and gets stuck at 96%. I tried flashing the radio several times but no luck... What am i doing wrong?
Click to expand...
Click to collapse
can u provide more details....actually as much details on the hd2 (eu/us), hspl, radio version, your process on how u tried etc...we will help you solve this.
gdsbalaji said:
can u provide more details....actually as much details on the hd2 (eu/us), hspl, radio version, your process on how u tried etc...we will help you solve this.
Click to expand...
Click to collapse
Their is a guide in my signature, its got basically everything you need to know. If you have problems post on there or pm me. I will gladly help.
Sent from my HD2 using xda premium
gdsbalaji said:
can u provide more details....actually as much details on the hd2 (eu/us), hspl, radio version, your process on how u tried etc...we will help you solve this.
Click to expand...
Click to collapse
I have the T Mobile US version, HSPL SPL-2.08.HSPL 8G XE COtullaHSPL 0x05 0x50(what it says on tricolor bootloader). The radio i tried to install is 2.15.50.14.
I got the drivers, my PC finally got a connection with the HD2 so i performed a task29 and wiped the phone then i followed your guide tried to install the radio but the process with CustomRUU.exe got stuck at 96% and said there was an error "this update utility can not be used on your device." and now the phone shows an Update Fail screen without a radio i cant install MAGLDr then install WP7 on it so what can i do?
kylew1212 said:
Their is a guide in my signature, its got basically everything you need to know. If you have problems post on there or pm me. I will gladly help.
Sent from my HD2 using xda premium
Click to expand...
Click to collapse
Thank you i read your guide. So can i instal clK without a radio? Also can i install ICS beta10 or Windows Phone 7 with cLK and witout going through the radio installation?
Another thing... the came with almost no battery and i cant charge the phone with the update failed screen i saw that i need at least 50% of battery but i dont think the phone has that much.
Pentuni said:
Thank you i read your guide. So can i instal clK without a radio? Also can i install ICS beta10 or Windows Phone 7 with cLK and witout going through the radio installation?
Another thing... the came with almost no battery and i cant charge the phone with the update failed screen i saw that i need at least 50% of battery but i dont think the phone has that much.
Click to expand...
Click to collapse
Okay sorry I should've explained more..
yes you have to have a radio.
Yes you can install ics beta 10 with clk.
No you cannot install wp7 with clk magldr is required for that.
If your phone is getting close to running out of battery I would flash clk 1.5 via SD card and then charge the phone up
Sent from my HD2 using xda premium
Ok so i got the radio installled and proceeded with the process with magldr installed fine and i followed this guide to get WP7.
http://forum.xda-developers.com/showthread.php?t=1246040
After the installation the phone syas reboot now! but doesnt do anything i had to pull out the battery and now it wont boot. ts stuck in a blank magldr menu.
EDIT: I managed to get magldr to show something, it tries to boot WPH but says 1eFATAL HIT 1. Did i scre up the installation? If i hold the power button it keeps doing the same thing without showing the options menu how do i wipe the rom so i can flash a new one?
Edit 2: flashed wp7 again boots magldr then sticks on GO GO GO! again.
I'm having the same problem until today.
Did a task29, installed magldr, cwm, then a rom, radio is 2.15.50.14.
It can boot to CWM, it can reinstall the rom but it's gets stuck in the go go go after restarting.
Please help
TIA
I know how to use magldr, but not tons about it.. also I think you guys should post in the wp forums someone there may be better help
Sent from my HD2 using xda premium
Pentuni said:
Ok so i got the radio installled and proceeded with the process with magldr installed fine and i followed this guide to get WP7.
http://forum.xda-developers.com/showthread.php?t=1246040
After the installation the phone syas reboot now! but doesnt do anything i had to pull out the battery and now it wont boot. ts stuck in a blank magldr menu.
EDIT: I managed to get magldr to show something, it tries to boot WPH but says 1eFATAL HIT 1. Did i scre up the installation? If i hold the power button it keeps doing the same thing without showing the options menu how do i wipe the rom so i can flash a new one?
Edit 2: flashed wp7 again boots magldr then sticks on GO GO GO! again.
Click to expand...
Click to collapse
Its happened to me before. Make sure as soon as you flash magldr, thats you clear mbr on sd card and use last 24 nand, and you will be fine, otherwise you will stay stuck on go go go go
good luck!
Yep.. thats a problem for you, but also for me, i have HTC HD2 fully working, just replaced digitzier soon, WinMo just works flawless thought it sucks ballls, and whenever i try to do task 29 then install radio then install magldr then install cwm with the required partition, i get stuck on GO GO GO! ..
SO PRETTY MUCH I FLASHED HSPL3 SUCCESSFULLY I THEN PROCEEDED TO FLASH THE RADIO WITH THE HD2 TOOLKIT IT GAVE ME A FAIL SO I FLASHED THE Leo 2.15.50.14 RADIO IT GOES TO 100% BUT STILL GAVE ME AN ERROR SO I WENT ON AND MOVED FOEWARD AND INSTALLED MAGLDR AND IT FLASHED TO 100% BBBUUTT!! I HAVE A BLANK COTULLA RECOVERY SCREEEN ANY HELP WOULD BE GREATLY APPRECIATED
Just from my own experience any of the newer HD2s I haven't had to flash radio on them since the early ones...the stock radio is up to date. Maybe just task29 it, and start with hspl then magldr and so on
Sent from my HTC HD2 using xda app-developers app
Okay after i task 29 it should it reboot into the windows phone os ??? Cause all it does is vibrate 4 short times and then goes black
I'm sorry I can't say for sure....when your on the screen with 3 colors is the hspl there? And which radio version is showing? Maybe something wrong there? I just figured task29 and start fresh. If you scroll down a few threads in here there is a definitive radio thread and one forbade troubleshoot that mentions using the yellow reset button on the phone, maybe there is something there that can help atleast until someone who knows the issue comes along.
Sent from my HTC HD2 using xda app-developers app
YEAH the hspl is there 2.08 HSPL or something like that so i ran the task 29 and the phone went blank and then went in to the TMOBILE STICK TOGETHER splash screen and it hangs there which intially was what was wrong with the phone but ill try the yelloe reset button and see what happens
Yeah the task29 supposed to do that, from there I just flash magldr then partition then rom
Sent from my HTC HD2 using xda app-developers app
yeah i tried to task 29 then flash the magldr and im still getting the blank aMGLDR V1.13 Screen with no menu options
its just the title with nothing underneath the title just blank
I'm sorry stumped....probably something simple we are missing. Any chance you tried clk instead? I have zero experience with clk but I imagine its similiar in setup aspect.
Sent from my HTC HD2 using xda app-developers app
so i was able to get mgldr to load with the menu now when i try and enter ad recovery i get an AWESOME "1E FATAL HIT 1" whatever the hell that means
That fatal error code is mentioned in the thread with the yellow reset button.
Sent from my HTC HD2 using xda app-developers app
Hi, I had "HD2_NDT_MIUI_GINGER_2.3.7_DEVELOPMENT_V48.0_MAGLDR" rom on my phone.I wanted change it to "MIUI.us-ICS-Leo-2.7.13-HWA".First I made task29, then i installed magldr but screen freezed on magldr menu. Then i made task29 again and installed clk 1.5 this time.After edit setting, i press recover but appeared error on screen. Then i tried winmo but it stopped on different percentages (2,15,30 ,...)
I used HSPL 3 & 4 but nothing happend.I couldnt go in recovery mode in both of magldr & clk mode.
And now my phone is dead. I couldnt make task29 sometimes. I couldnt install any version of android and winmo.
Please help me.
goldfly90 said:
Hi, I had "HD2_NDT_MIUI_GINGER_2.3.7_DEVELOPMENT_V48.0_MAGLDR" rom on my phone.I wanted change it to "MIUI.us-ICS-Leo-2.7.13-HWA".First I made task29, then i installed magldr but screen freezed on magldr menu. Then i made task29 again and installed clk 1.5 this time.After edit setting, i press recover but appeared error on screen. Then i tried winmo but it stopped on different percentages (2,15,30 ,...)
I used HSPL 3 & 4 but nothing happend.I couldnt go in recovery mode in both of magldr & clk mode.
And now my phone is dead. I couldnt make task29 sometimes. I couldnt install any version of android and winmo.
Please help me.
Click to expand...
Click to collapse
Isnt anyone to guide me?!!!!!!!!
Flashing and doing task29 multiple times are harmful for any ROM . Every ROM has a read write life.
Anyways, just download the winmo from HTC site for your mobile.
Go to the tri color screen, and connect your mobile . USB will be shown in your mobile once connected.(I hope you have necessary drivers installed...if not install windows mobile device centre.)
And flash the ROM. N be patient....it may take some time..10..15mins. Just wait.
Sent from my T-Mobile HTC HD2 using XDA Premium.
Hi i wanted to install android my HD2 bt the installation stuck on zero amd gives me error every yime at 0% when i start swipe i used MGLDR and HD2 toolkit bt samee problem. please help me i want to Flash android in it. it has currently a stock windows phone never updated
On tri Colur screen thes three appear with SPL 3.03
radio 2..15.50.1
MIcroP (led)
MicroP (touch)
Umm .. are you following a guide or something? Because you need HSPL 2.08 prior to flashing anything other than stock.
At last done got an idea in sleep so downgraded Hspl to 1.42 then used mgldr and then hspl upgraded to 2.08 and there it go boot loader
Sent from my NexusHD2 using xda app
cannot call
Hello,
first of all sorry if I'm posting in a wrong place.
I tried many native sd roms with Android on HD2 but each one has a huge problem. When I boot into Android I have to make a first call which lasts only 1 second and then it disconnects. This happens every time and eats my credit. I thought that installing a new rom will fix this problem, I am using BoxMax now, but the problem is even worse. Somebody calls me and it disconnects in few seconds. Anyone having same problems? Thanks a lot for help.
gozer1 said:
Hello,
first of all sorry if I'm posting in a wrong place.
I tried many native sd roms with Android on HD2 but each one has a huge problem. When I boot into Android I have to make a first call which lasts only 1 second and then it disconnects. This happens every time and eats my credit. I thought that installing a new rom will fix this problem, I am using BoxMax now, but the problem is even worse. Somebody calls me and it disconnects in few seconds. Anyone having same problems? Thanks a lot for help.
Click to expand...
Click to collapse
try a nand rom, not a nativeSD one... it's full of rom and guides around
RASHIDDDDD said:
Hi i wanted to install android my HD2 bt the installation stuck on zero amd gives me error every yime at 0% when i start swipe i used MGLDR and HD2 toolkit bt samee problem. please help me i want to Flash android in it. it has currently a stock windows phone never updated
On tri Colur screen thes three appear with SPL 3.03
radio 2..15.50.1
MIcroP (led)
MicroP (touch)
Click to expand...
Click to collapse
install HSPL
I m not able to install any thing. PC not recognized
Sent from my HTC HD2 using xda app-developers app
you need drivers to have hd2 recognized by windows in bootloader (tri colour) screen... install activesync or WMDC (x64 or x86 accordingly to your os)
Had fixed the problem with some thinking when downgrading to cotulla spl 1.42 then flashng hspl thn upgrading to 2.08
Sent from my NexusHD2 using xda app-developers app