Related
Just got an HD2,coming from my Hermes.
It's like going from a 19" monitor to a 32" monitor
Not new to flashing as I've been doing it for years on my Hermes,radios and roms.
New to the HD2 obviously so I need to get some things clear before I proceed.
Flashed HSPL 2.08 already.
I believe I need this version so that I can run android and win7?
Flashed my 1st rom,an energy one.
All is well except I'm not really keen on win 6.5 anymore.
Although most of my cabs work which is great
I want to try win7 and android.
Android
3 versions?
nand=runs from the phone?
magldr=?
SD=runs from the SD card?
Win7
Not quite sure as I've not read that far yet
Is flashing win7 same as flashing a win6.5 or do I need to do something extra?
Dual boot is working with HD2 or not?
Gen.Y DualBOOT v1.0.6.0 says no in the initial post.....
"Just to clear up the most asked question in this thread, this app will NOT work with the HTC HD2, because there is no android distro available yet for that platform (SnapDragon)"
....but that was over a year ago.
Anything else I need to know?
Your right on it all, magldr you install from the tri colour screen, its where Android is installed from on the nand, then you will need clock work mod, this is basically Android recovery, you can create back ups of your roms and also install Android roms directly from SD,
Win 6.5 is the past
I've not really done much with win7 Android is the way forward,
Gingerbread is the latest version of Android.
Look for clk versions in the Android nand thread
Clk = clockwork
Probably get started with
http://forum.xda-developers.com/showthread.php?t=769026
I've been on Android for a while now, the last time I dual booted I ran Win 6.5 from nand then I loaded android from SD
I'm using miui its a total re write and everything is themeable but is get used to Android first
Anything else
Sent from my HTC HD2 using Tapatalk
Hd2 toolkit
http://forum.xda-developers.com/showthread.php?t=1090783
That will help, you will need to update your "leo_radio" aswell
Sent from my HTC HD2 using Tapatalk
Miui is here
http://forum.xda-developers.com/showthread.php?t=1117787
Sent from my HTC HD2 using Tapatalk
Thanks for all them
Not too sure how to 'flash' to an android?
or to load the cLK?
they come as disk image files (.img)
They come as .zip files.
Find the clk thread and learn how to install it, then you simply put the. Zip file on your SD and load clk then install Android from the zip
Sent from my HTC HD2 using Tapatalk
Ok
I'm going to use the Hd2 toolkit,this also cLK's my device.
Why does it need to partition my device and what's a good size?
I seem to have ran into some bother with fastboot command when doing cLK for dummies.
I'm getting.......
'fastboot' is not recognized as an internal or external command,
operable program or batch file.
It partitions some of your SD to ext4 to make more internal memory for apps
I was about to write you a walk-through but I've stole this instead follow it step by step
Sent from my HTC HD2 using Tapatalk
langthang;12431253]How to flash ROM:
HD2 NAND Toolkit - Toolkit for HD2 Users (From ksubedi)
Use MAGLDR
1. Your phone need HSPL 2.08.HSPL first
2. Flash DFT_LEO_MAGLDR113_DAF
Link download MAGLDR113
- Go to Bootloader
- Connect your phone to PC
- Run ROMUpdateUtility.exe and follow guide step by step
- Phone auto reboot and goto MAGLDR113 menu
- Done
3. Flash Recovery
Link download newest Recovery 3.0.2.4: thanks seadersn
http://www.mediafire.com/?f81pamq6fbjmtw5
- Goto MAGLDR113 menu
- Choose USB Flasher (use Volume down/Volume up button, then press Call button)
- Connect your phone to PC
- Run DAF.exe and follow guide step by step
- Phone auto reboot and go to MAGLDR113 menu
- Choose AD Recovery to go Recovery Menu
4. Wipe full data and Advance - Dalvik cache on Recovery Menu is recommand
- If you update from previous version, only need wipe cache/dalvik cache and all your data will saved
5. Flash ROM use Recovery
- Choose Install zip file from SD card
- Follow the guide
- Press Call button (Green button) to accept - Reject button (Red button) to Cancel
6. Reboot and see your result
Use cLK
Follow the guide in here:
http://forum.xda-developers.com/showthread.php?t=901305
Very easy way to prepare flash ROM use Tools here:
http://forum.xda-developers.com/showthread.php?t=1090783
How to enable Data2EXT in MIUI GINGER ROM (Thanks droidzone about these scripts):
Note: This feature require high speed SD card (Class 6 or higher) for best performance, the slower SD card work but the ROM is slow down
1.Partition your SD card
- Format SD card
- Create EXT Partition. There is the easy way to create EXT Partition by CWM Recovery:
+ Goto Recovery Menu
+ Cho Advanced -->Partition SD Card
+ Choose EXT size (Maximum is 2048Mb) and Swap size (Recommand is 128Mb)
+ Waiting until Done
2. Install Data2EXT feature:
- Install your ROM by CMW Recovery
- Install the A2SD Killer scripts file (attach file bellow)
- Reboot once after running the A2SD Killer and setup everything but don't install anything.
- Reboot to recovery once again and install the Data2SD Installer (attach file bellow)
- Reboot again and see result
ReInstall Data2EXT procedure:
http://forum.xda-developers.com/showpost.php?p=12999815&postcount=1744[/QUOTE]
Sent from my HTC HD2 using Tapatalk
Sent from my HTC HD2 using Tapatalk
Just can't seem to be able to install the recovery image.
Not getting past fastboot commands in windows
Going to try through android sdk...........
Have you installed windows drivers? And ran as admin?
Sent from my HTC HD2 using Tapatalk
whynot66 said:
Have you installed windows drivers? And ran as admin?
Sent from my HTC HD2 using Tapatalk
Click to expand...
Click to collapse
yes
placed the fastboot.exe and AdbWinApi.dll in the folder and it just sits there saying 'waiting for device'.
When you boot your hd2 into magldr then you scroll to "usb flasher" whilst usb is connected to pc? What happens, does windows recognise the device? Does it install drivers?
Sent from my HTC HD2 using Tapatalk
Download this http://www.mediafire.com/?f81pamq6fbjmtw5
Don't change anything in the folder just boot magldr click usb flasher connect usb and run daf.exe
Sent from my HTC HD2 using Tapatalk
whynot66 said:
When you boot your hd2 into magldr then you scroll to "usb flasher" whilst usb is connected to pc? What happens, does windows recognise the device? Does it install drivers?
Sent from my HTC HD2 using Tapatalk
Click to expand...
Click to collapse
Went down the cLK route.
whynot66 said:
Download this http://www.mediafire.com/?f81pamq6fbjmtw5
Don't change anything in the folder just boot magldr click usb flasher connect usb and run daf.exe
Sent from my HTC HD2 using Tapatalk
Click to expand...
Click to collapse
I'll try that,thanks.
Ok both went well but not sure how to flash a magldr?
One says enter usb flasher and then run daf.exe in the rom but I don't see that in the rom I downloaded....CM7-v2.1.0-MAGLDR-CWM.zip
phone is sat in the magldr boot screen?
tried putting the rom onto the sd card with usb mass storage which went ok.
fails to flash when using boot AD Sd
load zimage
sd kernal open failed
it's a zip file?
__________________________________
Ok found another post that explains things a bit better,let's see what happens.......
The daf thing is old, now almost 99% of the ROMs use ClockworkMod. When you're on MAGLDR screen, using the volume rockers, go to USB flasher and select it by pressing the call button. Run the Android Toolkit and choose MAGLDR repartion, and select 150mb partition size from the left panel then click "Repartition" . After it finishs, go to magldr and choose "Android Recovery" or something similar, it will get you in an orange texted screen (CWM) . put the file you downloaded on your sd card and choose flash zip file, then choose it and let it do its thing .
kawazaki said:
The daf thing is old, now almost 99% of the ROMs use ClockworkMod. When you're on MAGLDR screen, using the volume rockers, go to USB flasher and select it by pressing the call button. Run the Android Toolkit and choose MAGLDR repartion, and select 150mb partition size from the left panel then click "Repartition" . After it finishs, go to magldr and choose "Android Recovery" or something similar, it will get you in an orange texted screen (CWM) . put the file you downloaded on your sd card and choose flash zip file, then choose it and let it do its thing .
Click to expand...
Click to collapse
Thanks for that
I'd just found that out.
Running Android now.
Thank guys I'm a flashaholic now
How do I get my music etc onto my SD card without booting into magldr?
Just plug the wire in whilst I'm android, you'll get a notification slide the top down and mount it
Sent from my HTC HD2 using Tapatalk
Hi,
I am trying to install this rom:
http://forum.xda-developers.com/showthread.php?t=1326217
I recently bought a new sd card from 1 gb to 16 gb as I like Sense roms.
My procedure is as follows:
step1) task 29:
turn off phone
turn on holding volume down-so you'll go to bootloader screen
be sure you see 'usb' in screen (not 'serial')
in nand toolkit click task29 and choose proper options in each screen.
step2) flashing radio:
in phone go to bootloader screen again
in nand toolkit at bottom click browse an find your radio.nbh in pc then click install RUU(when it comes to 96% it will wait for a while its normal)
step3) flashing mgldr:
in phone go to bootloader screen
in toolkit click install mgldr(at bottom)
4) now in mgldr go to usb flasher.be sure you see usb flasher.....usb in screen
in nand toolkit choose mgldr repartition (at left top)
choose 400mb partition size(at left)
write 4 instead of 45 as cache size
click repartition at right bottom.so you'll have repartitioned your nand.
5) mgldr menu go to ad recovery-advanced-partition sd card-1024-0
(so you'll have an sd-ext partition of 1gb which is necessary for this and many other roms)
then in mgldr menu (you can go to this menu by rebooting or pulling out battery) go ad recovery-mounts and storage-mount usb storage-when pc sees phone, send rom to phone
6) mgldr menu-ad recovery-install zip from sd-choose zip from sd-find your rom and choose with call button-after installation is complete reboot phone-after approximately 20 minutes the phone will be ready.
Where am I going wrong?
So?
Where are you stuck ? (What is the problem ?)
Marvlesz said:
So?
Where are you stuck ? (What is the problem ?)
Click to expand...
Click to collapse
After doing all that, I get a message saying " kernal missing" or something along those lines.
Is the above procedure correct ?
Why dont you try all of your steps mentioned except 2 & 5?? A new radio does not need to be flashed every time. Also the systemshouldcreate its own partion upon boot.
Sent from my Transformer TF101 using xda premium
Wait step 5 is wrong. Mass storage within magldr is glitched. You need to use a card writer to put your rom onto your sd card. Sorry i didn'tcatch that at first. Also you still should not have to flash a new radio everytime.
Sent from my Transformer TF101 using xda premium
kylew1212 said:
Wait step 5 is wrong. Mass storage within magldr is glitched. You need to use a card writer to put your rom onto your sd card. Sorry i didn'tcatch that at first. Also you still should not have to flash a new radio everytime.
Sent from my Transformer TF101 using xda premium
Click to expand...
Click to collapse
Do you know why it would give the message when turning on "Kernal missing"
xda_apprentice said:
Do you know why it would give the message when turning on "Kernal missing"
Click to expand...
Click to collapse
Its something about transferring data, I'm not certain exactly what. I would assume the file isn't transferred right over magldr interface and somehow parts of the rom become not right for lack of better terms. I read once to not transfer files using magldr because 1.13 is glitched. I'm not 100% sure what it is. Just try a card reader and see if that helps. Unless your dual booting I prefer clk .
Sent from my HTC HD2 using xda premium
What exactly does it do turning on? Kernal missing .. does it boot loop, freeze or restart?
Sent from my HTC HD2 using xda premium
Step 5.5 ... in cwm - mounts and storage (or something) - mount SD card - copy over your rom.
This will show your SD on the PC, and unlike the magldr USB storage the cwm one works. No card reader necessary.
samsamuel said:
Step 5.5 ... in cwm - mounts and storage (or something) - mount SD card - copy over your rom.
This will show your SD on the PC, and unlike the magldr USB storage the cwm one works. No card reader necessary.
Click to expand...
Click to collapse
I normally just mount and copy it over and that copies it over.
But the problem is after flashing, when magldr starts I get a message in the lines of "Kernel missing" and it stops.
Does my steps differ to anything you would suggest?
xda_apprentice said:
I normally just mount and copy it over and that copies it over.
But the problem is after flashing, when magldr starts I get a message in the lines of "Kernel missing" and it stops.
Does my steps differ to anything you would suggest?
Click to expand...
Click to collapse
So it never gets past magldr?
Sent from my HTC HD2 using xda premium
xda_apprentice said:
I normally just mount and copy it over and that copies it over.
But the problem is after flashing, when magldr starts I get a message in the lines of "Kernel missing" and it stops.
Does my steps differ to anything you would suggest?
Click to expand...
Click to collapse
Just follow your steps minus the radio flashing as you only have to do this once (which I'm sure you have already done since you have been using custom roms). Then instead of using MAGLDR to transfer the rom, boot into CWR first and then using mounts and storage, transfer it there. It sounds like MAGLDR is corrupting the file transfer (as it usually does).
Just start over with task29 then skip the radio flashing and adjust your steps to transferring the rom over through CWR.
chrisrj28 said:
Just follow your steps minus the radio flashing as you only have to do this once (which I'm sure you have already done since you have been using custom roms). Then instead of using MAGLDR to transfer the rom, boot into CWR first and then using mounts and storage, transfer it there. It sounds like MAGLDR is corrupting the file transfer (as it usually does).
Just start over with task29 then skip the radio flashing and adjust your steps to transferring the rom over through CWR.
Click to expand...
Click to collapse
Hey Chrisrj28 (it's been sometime
I see what you mean! Or I could just copy it using sd adapter.
Thanks guys will try that out !
So I want to try out some SD ROMs for the HD2, as there's just so many to try. With Windows Mobile, you could boot into SD Android using Haret.exe. I'm wondering, is there a way [ via an app or Terminal or something] to boot into an SD ROM from NAND Android? I know the usual way to do it is from MAGDLR, but I have the issue with my end call button messing up my screen's responsiveness, so I'd like to avoid using MAGDLR if possible. Thanks for any help
sorry. deleted
ElectroBeijing said:
So I want to try out some SD ROMs for the HD2, as there's just so many to try. With Windows Mobile, you could boot into SD Android using Haret.exe. I'm wondering, is there a way [ via an app or Terminal or something] to boot into an SD ROM from NAND Android? I know the usual way to do it is from MAGDLR, but I have the issue with my end call button messing up my screen's responsiveness, so I'd like to avoid using MAGDLR if possible. Thanks for any help
Click to expand...
Click to collapse
Unfortunately no, if you are using a Nand rom then MAGLDR is the only way. The file selection process is exclusive to WinMo
chrisrj28 said:
Unfortunately no, if you are using a Nand rom then MAGLDR is the only way. The file selection process is exclusive to WinMo
Click to expand...
Click to collapse
Awwww
But my screen became altogether unresponsive, so I'm getting it replaced and will be able to easily boot between SD and NAND without the worry like before. Just this time I'll be very careful with the use of my buttons!
hi there,
i tried to install clockwork recovery as well as tried to partition system partition through hd2 toolkit but i get the following error:
'Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (736)
i hav disabled the checkbox of allo usb connection in window mobile device center.
i run everything using administrator. i use compatibility and administrator mode of xp sp2 in rapitool.exe and EnterBootloader.exe.but still getting the same error usb init failed 736
please help me..waiting for ur kind response,
thanks sameer.
Does it say USB on phone?
And what does it say in device manager on pc
Sent from my NexusHD2 using xda premium
shanman-2 said:
Does it say USB on phone?
And what does it say in device manager on pc
Sent from my NexusHD2 using xda premium
Click to expand...
Click to collapse
hi
i changed ports and tried running hd2 toolkit using run as a administrator to partition it worked..the rom is installed and rebooted but after it rebooted it went to magldr ..how do i set it up so that it boots the rom which is installed automatically? any idea
i hav installed using NativeSD (SD-EXT)..i just have 4gb sd card..is it advisable to run through it or i have to install to nand... i have htc hd2 1024 usa.
how to change from native sd to nand only any idea? want to know..!!
please enlight me.
thanks sameer
Can't remember, long time since I used magldr, dodgy USB port!!
Boot "ad nand" or something like that...
Sent from my NexusHD2 using xda premium
_sameer_ said:
i hav installed using NativeSD (SD-EXT)..i just have 4gb sd card..is it advisable to run through it or i have to install to nand... i have htc hd2 1024 usa.
Click to expand...
Click to collapse
in magldr set the sd card source folder to point to the /nativesd folder on the sd card, and set the default boot mode to ad sd. (yes, even though its booting from the ext partition, it finds the initial files in the folder on the sd fat32 partition).
hi
hi ,
thanks everyone for helping me with ur kind response and support. i would like to ask how do u install applications directly to sd than phone memory..any idea..is it possible?
is there any way to update the rom directly through rom in the phone or hav to download it from xda rom page?
'
hav a nice weekend.
thanks sameer
_sameer_ said:
hi ,
thanks everyone for helping me with ur kind response and support. i would like to ask how do u install applications directly to sd than phone memory..any idea..is it possible?
is there any way to update the rom directly through rom in the phone or hav to download it from xda rom page?
'
hav a nice weekend.
thanks sameer
Click to expand...
Click to collapse
You have to download the updates from the xda.
And regarding the applications, do u want to install them on the sd-ext partition?
hi
adil1508 said:
You have to download the updates from the xda.
And regarding the applications, do u want to install them on the sd-ext partition?
Click to expand...
Click to collapse
hi im running on nand..but i wanted to install apps directly to sd card..have no sd card partition..is it possible?
thanks sameer
_sameer_ said:
hi im running on nand..but i wanted to install apps directly to sd card..have no sd card partition..is it possible?
thanks sameer
Click to expand...
Click to collapse
I suppose u can move them manually to the sd-card, or select the directory for installation as the sd-card ( i think this is done in the play store settings, i dont really remember ). But why do you want to install apps in the sd-card?
I suggest u make an ext partition of your sd card. WARNING!: this will wipe ur sd card clean, make a backup!.
The advantage of making a ext partition is that when u use roms with A2SD support, the ext partition on ur SD CARD acts as internal memory. So u have sort of increased ur internal memory
helle every one
how can i change recovery size in magldr (not clk) without pc on the phone(leo)?
any chance?
Sent from my HTC HD2 Leo using Tapatalk
What do you mean for Recovery Size? Partition size maybe...
BTW, I remember a Recovery which can be launched from SD, you just have to put the files on memory and from MALGRD select Option "Boot from SD", but don't know exactly if you will can repartitioning the internal memory...
thank you
i want to resize recovery size whitout pc such as system size(180-200-400&etc).and cache size(2-5-45&etc)
that means the size of recovery(system,cache,...) who rom cooker wants.
such(please use system 180 and cache 2)
im using nand option(not sd option rom) and i havent any pc to test other roms that needs to edit flash.cfc file and run daf.exe,iwant to change this options on phone (such as clk) in magldr boot loader or any thing that no need pc or clk
sorry for my bad english
excuseme sir
Sent from my HTC HD2 Leo using Tapatalk
I think you cannot do that. You need PC.
if you are running only android try clk 1.5... this way you can resize without pc...
lukes91 said:
if you are running only android try clk 1.5... this way you can resize without pc...
Click to expand...
Click to collapse
thank you for answer
im use nand android and sd build for usb otg option that force me to using magldr option.i think clk dont have any option to run nand with d2ext4 and sd(native sd is unuseable because roms on nand with d2ext4 and native sd get some bugs!!!).isit true?
Sent from my HTC HD2 Leo using Tapatalk
huiq3 said:
thank you for answer
im use nand android and sd build for usb otg option that force me to using magldr option.i think clk dont have any option to run nand with d2ext4 and sd(native sd is unuseable because roms on nand with d2ext4 and native sd get some bugs!!!).isit true?
Sent from my HTC HD2 Leo using Tapatalk
Click to expand...
Click to collapse
well, with clk hd2 becomes like a true android device, so you can run nand + ext4 sd data partition for sure; i don't know about the dual boot nand+sd (never tried), but i suppose you cant... hope i'm wrong
lukes91 said:
well, with clk hd2 becomes like a true android device, so you can run nand + ext4 sd data partition for sure; i don't know about the dual boot nand+sd (never tried), but i suppose you cant... hope i'm wrong
Click to expand...
Click to collapse
i know that clk is better than magldr
but i need(forced) dual boot for nand+ext4 and sd for otg option.when i use this(otg)in nand phone dont be charged,for charging i use sd build
thank you.
Sent from my HTC HD2 Leo using Tapatalk
huiq3 said:
i know that clk is better than magldr
but i need(forced) dual boot for nand+ext4 and sd for otg option.when i use this(otg)in nand phone dont be charged,for charging i use sd build
thank you.
Sent from my HTC HD2 Leo using Tapatalk
Click to expand...
Click to collapse
with clk you can charge your phone when it's off
lukes91 said:
with clk you can charge your phone when it's off
Click to expand...
Click to collapse
thank you but when phone turned off i lose incoming calls and massages and i cant make outgoing call & etc....
im using otg for small time but 6-7 times in day.for normal use and otg i have to use dual boot whitout losing any thing.
it means i cant use clk and havnt any way to resize partitons on phone.im forced to use pc for resizing
thank my brother
Sent from my HTC HD2 Leo using Tapatalk
huiq3 said:
thank you but when phone turned off i lose incoming calls and massages and i cant make outgoing call & etc....
im using otg for small time but 6-7 times in day.for normal use and otg i have to use dual boot whitout losing any thing.
it means i cant use clk and havnt any way to resize partitons on phone.im forced to use pc for resizing
thank my brother
Sent from my HTC HD2 Leo using Tapatalk
Click to expand...
Click to collapse
so i fear you have to use pc
lukes91 said:
so i fear you have to use pc
Click to expand...
Click to collapse
thanks,
in my country the time is 1:03am and i dont know how about yours!!!!im say good night and good morning and good time and.....for you .thanks alot for your answering and help.bye
Sent from my HTC HD2 Leo using Tapatalk
huiq3 said:
thanks,
in my country the time is 1:03am and i dont know how about yours!!!!im say good night and good morning and good time and.....for you .thanks alot for your answering and help.bye
Sent from my HTC HD2 Leo using Tapatalk
Click to expand...
Click to collapse
here is 10:40 pm good night to you too
huiq3 said:
thank you but when phone turned off i lose incoming calls and massages and i cant make outgoing call & etc....
im using otg for small time but 6-7 times in day.for normal use and otg i have to use dual boot whitout losing any thing.
it means i cant use clk and havnt any way to resize partitons on phone.im forced to use pc for resizing
thank my brother
Sent from my HTC HD2 Leo using Tapatalk
Click to expand...
Click to collapse
I am pretty sure you can use SD recovery from here, put twrp2 folder on your sd card and boot it via magldr ad sd, then you should be able to resize your nand partitions, remember to backup first
Robbie P said:
I am pretty sure you can use SD recovery from here, put twrp2 folder on your sd card and boot it via magldr ad sd, then you should be able to resize your nand partitions, remember to backup first
Click to expand...
Click to collapse
thanks brother
but i used this and cant find any option to change & delete
i m use twrp2 in boot recovery and in this metod and this recovery cant find recovery size
twrp sd & normal twrp tested
please help me when you(or others) find this function
Sent from my HTC HD2 Leo using Tapatalk