Database Users

Can I install MAGLDR through SD card?

Similar to running Leoimg.nbh through boot screen...is it possible or does it require a pc?

Hi,
I have the same question since I broke my USB on the phone. (This is not covered by the warrenty)
I also like to know if it is posible if I can update HSPL.
Radio is posible and Rom by clockworks too.
Basicly I also like to know how the ROM organisation is and what is where in the rom and how the boot order is in the device.
Thanks.

anyone?
10 chars

No - you need a USB connection to a PC.

USB Port Damaged
Hi,
I would really like to install magldr but my USB port is damaged. Does anybody know if anybody is developing a version of magldr that can be installed from the SD card. I already have hspl 2.08.
Thanks in Advance!

j45p41 said:
Hi,
I would really like to install magldr but my USB port is damaged. Does anybody know if anybody is developing a version of magldr that can be installed from the SD card. I already have hspl 2.08.
Thanks in Advance!
Click to expand...
Click to collapse
I have not heard of anyone working on a way to to do this and franckly I don't beleive it will ever be possible. The reason I say this is bootloader only recognizes the file name loeimg.nbh when it searches for a ROM on the SD card. This type of file the .nbh is a file extension spacific for HTC devices runnin Windows Mobile and Andriod. the .nbh is a HTC Hermes ROM image wich is a ROM update utility. So you see it is spacificaly for used with ROMs and MAGLDR is a different type of bootloader not a ROM. There for the regular bootloader will not allow it to be flashed cause it does not meet predifined specifications for bootloader to flash it even if you added the .nbh extension to it. You would have to modifiy the original bootloader to achive this and I don't think you can modifiy it in this manner. You can not even come up with a seperate bootloader for it as any other bootloader has to run in sequence after the original bootloader just like MAGLDR does. So I very highly doubt that flashing MAGLDR will ever be possible, sorry friends.

I am also looking for a solution
My USB post is damaged by a high voltage from my car charger..

Ok guys I may have been completely wrong with my last post. I just yesterday flashed MAGLDR to my HD2 for the first time just to gain some hands on experience with it. I noticed yesteday that when you flash MAGLDR it uses a ROM update utility to flash it to the HD2. I also noticed that when you extract the files for MAGLDR this is this is what you get.
DAF
DAF
EnterBootloader
ErrorBattery.fig
ErrorUSB.fig
magldr.nbh
modelID.fig
rapitool
ROMUpdateUtility.cfg
ROMUpdateUtility
RUUGetInfo
RUUResource.dll
Notice the magldr.nbh file? This is the file the ROM update utility flashes when you flash MAGLDR. It also removes the current ROM on your HD2 when you flash MAGLDR. So knowing what I know about flashing a ROM or Radio from SD card, and now knowing this information on MAGLDR. I think it might be possible to flash MAGLDR via SD card. I mean it seems to me all you would have to do is rename the magldr.nbh file to leoimg.nbh. Then copy it to the root of your SD card and flash it like a ROM or radio from SD card. I have not personally tried it yet cause I have not had time to back up my wife's SD card and reformat it yet. I have to use hers because she has a 2GB card and I have the 16GB. But if anyone else would like to test my theory feel free, but I hold no responsability if you decide to try this and it goes bad.

Ok, I did find out you can install magldr by updating through SD like T-Macgnolia mentioned, CWM you can just put in the root of the SD and then works correct. The next problem I have is the partitioning CWM uses. Everywhere I looked I only see that the partitioning is done by USB flashing, Is there a posabilety to partitioning different?

telegraph0000 said:
Similar to running Leoimg.nbh through boot screen...is it possible or does it require a pc?
Click to expand...
Click to collapse
YESSSS
i've now flash it :
1. the flash by USB is not goes done
2. I've copied the magldr.nbh onto an 2GB SD
3. I've flash MAGLDR by SD
Hi
OrsoNerOne

thanks for the tip!
So is cwm magldr a special version of magldr?
I tried renaming version 1.3 and renaming to leoimg.nbh but it gets stuck on grey screen displaying -loading......
Should partition my sd first? Do I use any partitioning software, if so?
Thanks t-magnolia for the possibility of doing this!
Sent from my HTC HD2 using XDA App

j45p41 said:
thanks for the tip!
So is cwm magldr a special version of magldr?
I tried renaming version 1.3 and renaming to leoimg.nbh but it gets stuck on grey screen displaying -loading......
Should partition my sd first? Do I use any partitioning software, if so?
Thanks t-magnolia for the possibility of doing this!
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
No CWM is a recovery program much like native.Android devices have. It allows you to flash a Android ROM with the. zip file on your SD card just like a native Android device it also allows you to flash updates via your SD card and make a Nand Droid back up of your Android before flashingva update or new ROM and then use that back up to restore your settings apps and all once you have flashed the update or ROM. You can also use it to do a system recovery (this is like a hard reset for Win No) of your Android ROM if the need arises.
MAGLDR is a custom bootloader that allows you to flash Android or WP7 to a HTC HD2. Just as the bootloader for Win Mo starts up and allows Win Mo to boot, note you do not see the bootloader like you do MAGLDR but trust me bootloader runs first on boot up of Win No. MAGLDR also allows you to do a system recovery but CWM does it more like a native Android device would. MAGLDR is a very powerful and functional bootloader that can do way more than the Win Mo bootloader, but it just can not boot Win Mo yet lol kinda funny isn't it. Anyway read the CWM and MAGLDR threads they will teach you alot. Check my sig for links to both.
One more thing MAGLDR and CWM allows you to have access to your SD card as a mass storage device. MAGLDR has a Mass Storage option and CWM has a mount SD option. Oh and by the way you do not want to partition your SD card. You want it freshly formatted with fat 32 if at all possible, of course make a back up of hour intuit SD card before formatting it.
Thanks for the thanks but I did not make flashing MAGLDR and CWM via SD card. This was done by the rest devs that created these programs. I just happen to notice that it is posinle because the used .nbh files for both of them. Now this was either out of necesiety or out of some good pre planning of the devs. But the .nbh file is a file specific to HTC devices so you all desire Wichita one it was lol.

T-Macgnolia said:
No CWM is a recovery program much like native.Android devices have. It allows you to flash a Android ROM with the. zip file on your SD card just like a native Android device it also allows you to flash updates via your SD card and make a Nand Droid back up of your Android before flashingva update or new ROM and then use that back up to restore your settings apps and all once you have flashed the update or ROM. You can also use it to do a system recovery (this is like a hard reset for Win No) of your Android ROM if the need arises.
MAGLDR is a custom bootloader that allows you to flash Android or WP7 to a HTC HD2. Just as the bootloader for Win Mo starts up and allows Win Mo to boot, note you do not see the bootloader like you do MAGLDR but trust me bootloader runs first on boot up of Win No. MAGLDR also allows you to do a system recovery but CWM does it more like a native Android device would. MAGLDR is a very powerful and functional bootloader that can do way more than the Win Mo bootloader, but it just can not boot Win Mo yet lol kinda funny isn't it. Anyway read the CWM and MAGLDR threads they will teach you alot. Check my sig for links to both.
One more thing MAGLDR and CWM allows you to have access to your SD card as a mass storage device. MAGLDR has a Mass Storage option and CWM has a mount SD option. Oh and by the way you do not want to partition your SD card. You want it freshly formatted with fat 32 if at all possible, of course make a back up of hour intuit SD card before formatting it.
Thanks for the thanks but I did not make flashing MAGLDR and CWM via SD card. This was done by the rest devs that created these programs. I just happen to notice that it is posinle because the used .nbh files for both of them. Now this was either out of necesiety or out of some good pre planning of the devs. But the .nbh file is a file specific to HTC devices so you all desire Wichita one it was lol.
Click to expand...
Click to collapse
Hello t-magnolia,
So my .situation is that I have hsol 2.08 and my usb port won't work at all. I don't have magldr installed and am still booting android via winmo.
So if I want to install a nand based rom, what should the steps be please?
I have tried renaming magldr.nbh to leoimg.nbh and put it in the root of my sd. However, it goes.into a grey screen and displays 'loading.........' In blue text and just hangs.

j45p41 said:
Hello t-magnolia,
So my .situation is that I have hsol 2.08 and my usb port won't work at all. I don't have magldr installed and am still booting android via winmo.
So if I want to install a nand based rom, what should the steps be please?
I have tried renaming magldr.nbh to leoimg.nbh and put it in the root of my sd. However, it goes.into a grey screen and displays 'loading.........' In blue text and just hangs.
Click to expand...
Click to collapse
Your problem is either you need to reformat your SD card with Fat 32 or you are using to large GB SD card. I hate to be the bearer of bad news but even if you get MAGLDR on your HD2 you still will npot be able to Flash a NAND Android ROM with out a working USB. Yes you can flash a NAND Android ROM via SD card using Clock Work Mod Recovery(CWM) but you still have to have a functioning USB port to flash CWM to your HD2. Sorry my friend but you will have to get your change your mainboard to get a working USB port befor you can go NAND Android with your HD2.

Haven't read the whole thread but once you've flashed MAGLDR it would be useless as you need a USB connection to flash CWM or a ROM.
Sent from my HTC Vision using XDA App

Skellyyy said:
Haven't read the whole thread but once you've flashed MAGLDR it would be useless as you need a USB connection to flash CWM or a ROM.
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
If you install CWM you can flash the ROM via install zip from sdcard/choose zip from sdcard/said XXXX ROM

T-Macgnolia said:
If you install CWM you can flash the ROM via install zip from sdcard/choose zip from sdcard/said XXXX ROM
Click to expand...
Click to collapse
But you can't flash CWM without going to USB Flasher in MAGLDR and well... you know.
Sent from my HTC Vision using XDA App

T-Macgnolia said:
If you install CWM you can flash the ROM via install zip from sdcard/choose zip from sdcard/said XXXX ROM
Click to expand...
Click to collapse
Thanks for the explanation. I guess the sd alternative will have to do! At least there seems to be support for this still.

You also have CLK thesedays but personally i still use CVM.

Do you know if there will be a version of clk with integrated cwm?

HTC HD2 - Install ROM problems

Hi,
I want to install this NAND ROM called HD2_NDT_MIUI_GINGER_DEVELOPMENT_V25.2SE_MAGLDR_Hon eycomb:
http://forum.xda-developers.com/showthread.php?t=1010498
How do I install it? I mean, it downloads in .rar file and there are 4 files (boot, data, META-INF and system)
How do I install this? I have installed before but that was much easier using dap.exe

xda_apprentice said:
Hi,
I want to install this NAND ROM called HD2_NDT_MIUI_GINGER_DEVELOPMENT_V25.2SE_MAGLDR_Hon eycomb:
http://forum.xda-developers.com/showthread.php?t=1010498
How do I install it? I mean, it downloads in .rar file and there are 4 files (boot, data, META-INF and system)
How do I install this? I have installed before but that was much easier using dap.exe
Click to expand...
Click to collapse
i think it is in zip format not rar.dont unzip it. just put zip file to sd.
give some information, do you have mgldr, is this your first rom etc.

mutil said:
i think it is in zip format not rar.dont unzip it. just put zip file to sd.
give some information, do you have mgldr, is this your first rom etc.
Click to expand...
Click to collapse
Thanks for the reply.
I have installed a ROM before but that was using RUU and just flashed and connected to USB. I didn't like the Android ROM so I reinstalled Windows 6.5 back to Stock.
I wanted to install this on NAND. How would I do this?

xda_apprentice said:
Thanks for the reply.
I have installed a ROM before but that was using RUU and just flashed and connected to USB. I didn't like the Android ROM so I reinstalled Windows 6.5 back to Stock.
I wanted to install this on NAND. How would I do this?
Click to expand...
Click to collapse
you can do it with a tool:http://forum.xda-developers.com/showthread.php?t=1090783
1)first get the recommended radio:2.15.50.14
2)download and install the nand tool kit
3)be sure you have hspl 2.08
4) go to bootloader screen(tri-color screen)
5)connect phone to pc ,see 'usb' at bottom
6)in toolkit click task29
7)go to bootloader again
8)in toolkit at bottom click browse and find your radio(2.15.50.14) click install ruu
9)go bootloader again
10)click install mgldr
11)in toolkit at left choose 150 and write 5 instead of 45
12)in mgldr menu go to usb flasher. be sure you see usb flasher....usb. if not change usb port etc.
13)in toolkit click repartition. be sure at left top mgldr repartition is chosen.
14) this operation will wipe your sd !!!when it finishes,in mgldr go ad recovery-advanced-partition sd card-1024-0 (so you'll have 1 gb sd-ext partition)
15) in mgldr-ad recovery-mounts and storage-mount usb storage-when pc sees phone send your downloaded rom.zip to sd
16)in mgldr: ad recovery-install zip from sd-choose zip from sd-find your rom.zip and choose it with call button.
17)after installation is complete reboot

you can also use these tutorials:
use the first one until you get mgldr (dont go beyond),then go the second
http://forum.xda-developers.com/showthread.php?t=893948
http://forum.xda-developers.com/showthread.php?t=1044830

mutil said:
you can also use these tutorials:
use the first one until you get mgldr (dont go beyond),then go the second
http://forum.xda-developers.com/showthread.php?t=893948
http://forum.xda-developers.com/showthread.php?t=1044830
Click to expand...
Click to collapse
Thanks for the reply.
When I first did a ROM change I was having a heart attack as didn't want to brick the phone.
Thanks for the instructions but if I am honest, I don't I could go through with that. Do you know of where I can download ROMs that come with RUU files? Like the Custom ROMs from HTC site?

If you flashed a ROM before, you are familiar with mgldr. If you flash mgldr there are only a few steps to flash a cwm ROM. Dont be so afraid. The possibility of breaking of phone is very low.
For ruu roms you should look at older ROM threads.
Sent from my Desire HD using XDA Premium App

mutil said:
If you flashed a ROM before, you are familiar with mgldr. If you flash mgldr there are only a few steps to flash a cwm ROM. Dont be so afraid. The possibility of breaking of phone is very low.
For ruu roms you should look at older ROM threads.
Sent from my Desire HD using XDA Premium App
Click to expand...
Click to collapse
Thanks for the reply.
I tried to look for a video to do the second stage but couldn't find it. Do know where I can?

xda_apprentice said:
Thanks for the reply.
I tried to look for a video to do the second stage but couldn't find it. Do know where I can?
Click to expand...
Click to collapse
there is a tool to perform many steps, it has a video tutorial too.many people are happy with it:
http://forum.xda-developers.com/showthread.php?t=1090783

mutil said:
there is a tool to perform many steps, it has a video tutorial too.many people are happy with it:
http://forum.xda-developers.com/showthread.php?t=1090783
Click to expand...
Click to collapse
Thanks for your reply and appreciate your help.
Is is easier to drag it to SD card via Windows Mobile Device Centre? If so, will it slow down performance?

xda_apprentice said:
Thanks for your reply and appreciate your help.
Is is easier to drag it to SD card via Windows Mobile Device Centre? If so, will it slow down performance?
Click to expand...
Click to collapse
do you mean using an sd rom dual booting with winmo?

mutil said:
do you mean using an sd rom dual booting with winmo?
Click to expand...
Click to collapse
Yes that's what I meant. Is it easier?

Of course it is easier. It needs no extra operation such as hspl task 29 etc. But sense roms are slower with sd method. I recommend americandroid or miui roms. Go to sd thread, download americandroid unrar it. Find Android folder in it. Put Android folder to sd card. In winmo with file explorer go to the folder. First click ctrl, then click haret. Flashing may take up to 30 minutes.
Sent from my Desire HD using XDA Premium App

mutil said:
you can do it with a tool:http://forum.xda-developers.com/showthread.php?t=1090783
1)first get the recommended radio:2.15.50.14
2)download and install the nand tool kit
3)be sure you have hspl 2.08
4) go to bootloader screen(tri-color screen)
5)connect phone to pc ,see 'usb' at bottom
6)in toolkit click task29
7)go to bootloader again
8)in toolkit at bottom click browse and find your radio(2.15.50.14) click install ruu
9)go bootloader again
10)click install mgldr
11)in toolkit at left choose 150 and write 5 instead of 45
12)in mgldr menu go to usb flasher. be sure you see usb flasher....usb. if not change usb port etc.
13)in toolkit click repartition. be sure at left top mgldr repartition is chosen.
14) this operation will wipe your sd !!!when it finishes,in mgldr go ad recovery-advanced-partition sd card-1024-0 (so you'll have 1 gb sd-ext partition)
15) in mgldr-ad recovery-mounts and storage-mount usb storage-when pc sees phone send your downloaded rom.zip to sd
16)in mgldr: ad recovery-install zip from sd-choose zip from sd-find your rom.zip and choose it with call button.
17)after installation is complete reboot
Click to expand...
Click to collapse
I am confused about this step -
14) this operation will wipe your sd !!!when it finishes,in mgldr go ad recovery-advanced-partition sd card-1024-0 (so you'll have 1 gb sd-ext partition)
If this Nand why is the sd needed?
If you can, is there a complete video to this?

xda_apprentice said:
I am confused about this step -
14) this operation will wipe your sd !!!when it finishes,in mgldr go ad recovery-advanced-partition sd card-1024-0 (so you'll have 1 gb sd-ext partition)
If this Nand why is the sd needed?
If you can, is there a complete video to this?
Click to expand...
Click to collapse
if you have an eu-hd2 the phone's internal storage isn't enough, so sd-ext partition is a kind of trick to increase internal storage. this is a partition that is seen by android but not by windows.
you can google youtube for videos about flashing mgldr 1.13. but at my first time i mostly used written sources in xda (i think i referred links of mskip's tutorials)
dont be so afraid, hd2 is a strong machine.
i'll try to look at your questions often. just start your operation

mutil said:
if you have an eu-hd2 the phone's internal storage isn't enough, so sd-ext partition is a kind of trick to increase internal storage. this is a partition that is seen by android but not by windows.
you can google youtube for videos about flashing mgldr 1.13. but at my first time i mostly used written sources in xda (i think i referred links of mskip's tutorials)
dont be so afraid, hd2 is a strong machine.
i'll try to look at your questions often. just start your operation
Click to expand...
Click to collapse
Thanks for your reply. Without a step by step video I am unable to this. I find it all confusing

Rom Issues Please Help

Hi,
I am trying to install this rom:
http://forum.xda-developers.com/showthread.php?t=1326217
I recently bought a new sd card from 1 gb to 16 gb as I like Sense roms.
My procedure is as follows:
step1) task 29:
turn off phone
turn on holding volume down-so you'll go to bootloader screen
be sure you see 'usb' in screen (not 'serial')
in nand toolkit click task29 and choose proper options in each screen.
step2) flashing radio:
in phone go to bootloader screen again
in nand toolkit at bottom click browse an find your radio.nbh in pc then click install RUU(when it comes to 96% it will wait for a while its normal)
step3) flashing mgldr:
in phone go to bootloader screen
in toolkit click install mgldr(at bottom)
4) now in mgldr go to usb flasher.be sure you see usb flasher.....usb in screen
in nand toolkit choose mgldr repartition (at left top)
choose 400mb partition size(at left)
write 4 instead of 45 as cache size
click repartition at right bottom.so you'll have repartitioned your nand.
5) mgldr menu go to ad recovery-advanced-partition sd card-1024-0
(so you'll have an sd-ext partition of 1gb which is necessary for this and many other roms)
then in mgldr menu (you can go to this menu by rebooting or pulling out battery) go ad recovery-mounts and storage-mount usb storage-when pc sees phone, send rom to phone
6) mgldr menu-ad recovery-install zip from sd-choose zip from sd-find your rom and choose with call button-after installation is complete reboot phone-after approximately 20 minutes the phone will be ready.
Where am I going wrong?

So?
Where are you stuck ? (What is the problem ?)

Marvlesz said:
So?
Where are you stuck ? (What is the problem ?)
Click to expand...
Click to collapse
After doing all that, I get a message saying " kernal missing" or something along those lines.
Is the above procedure correct ?

Why dont you try all of your steps mentioned except 2 & 5?? A new radio does not need to be flashed every time. Also the systemshouldcreate its own partion upon boot.
Sent from my Transformer TF101 using xda premium

Wait step 5 is wrong. Mass storage within magldr is glitched. You need to use a card writer to put your rom onto your sd card. Sorry i didn'tcatch that at first. Also you still should not have to flash a new radio everytime.
Sent from my Transformer TF101 using xda premium

kylew1212 said:
Wait step 5 is wrong. Mass storage within magldr is glitched. You need to use a card writer to put your rom onto your sd card. Sorry i didn'tcatch that at first. Also you still should not have to flash a new radio everytime.
Sent from my Transformer TF101 using xda premium
Click to expand...
Click to collapse
Do you know why it would give the message when turning on "Kernal missing"

xda_apprentice said:
Do you know why it would give the message when turning on "Kernal missing"
Click to expand...
Click to collapse
Its something about transferring data, I'm not certain exactly what. I would assume the file isn't transferred right over magldr interface and somehow parts of the rom become not right for lack of better terms. I read once to not transfer files using magldr because 1.13 is glitched. I'm not 100% sure what it is. Just try a card reader and see if that helps. Unless your dual booting I prefer clk .
Sent from my HTC HD2 using xda premium

What exactly does it do turning on? Kernal missing .. does it boot loop, freeze or restart?
Sent from my HTC HD2 using xda premium

Step 5.5 ... in cwm - mounts and storage (or something) - mount SD card - copy over your rom.
This will show your SD on the PC, and unlike the magldr USB storage the cwm one works. No card reader necessary.

samsamuel said:
Step 5.5 ... in cwm - mounts and storage (or something) - mount SD card - copy over your rom.
This will show your SD on the PC, and unlike the magldr USB storage the cwm one works. No card reader necessary.
Click to expand...
Click to collapse
I normally just mount and copy it over and that copies it over.
But the problem is after flashing, when magldr starts I get a message in the lines of "Kernel missing" and it stops.
Does my steps differ to anything you would suggest?

xda_apprentice said:
I normally just mount and copy it over and that copies it over.
But the problem is after flashing, when magldr starts I get a message in the lines of "Kernel missing" and it stops.
Does my steps differ to anything you would suggest?
Click to expand...
Click to collapse
So it never gets past magldr?
Sent from my HTC HD2 using xda premium

xda_apprentice said:
I normally just mount and copy it over and that copies it over.
But the problem is after flashing, when magldr starts I get a message in the lines of "Kernel missing" and it stops.
Does my steps differ to anything you would suggest?
Click to expand...
Click to collapse
Just follow your steps minus the radio flashing as you only have to do this once (which I'm sure you have already done since you have been using custom roms). Then instead of using MAGLDR to transfer the rom, boot into CWR first and then using mounts and storage, transfer it there. It sounds like MAGLDR is corrupting the file transfer (as it usually does).
Just start over with task29 then skip the radio flashing and adjust your steps to transferring the rom over through CWR.

chrisrj28 said:
Just follow your steps minus the radio flashing as you only have to do this once (which I'm sure you have already done since you have been using custom roms). Then instead of using MAGLDR to transfer the rom, boot into CWR first and then using mounts and storage, transfer it there. It sounds like MAGLDR is corrupting the file transfer (as it usually does).
Just start over with task29 then skip the radio flashing and adjust your steps to transferring the rom over through CWR.
Click to expand...
Click to collapse
Hey Chrisrj28 (it's been sometime
I see what you mean! Or I could just copy it using sd adapter.
Thanks guys will try that out !

after working sevral days i need help

hello guys i had NexusHD2-Gingerbread_V3.2a_NAND_(Android-2.3.7) on my htc hd2 then i wanted to use this rom
so after installing MAGLDR113 and CWR 5.0.2.6 i rebooted and created partition then i pressed mount and storage and pressed mount usb storage copied the the file name "NexusHD2-Gingerbread_V3.2a_NAND_(Android-2.3.7).zip" onto sd card and when i pressed choose zip from sd card and tried to install this it gave me error
"finding package, opening package, cant open /sdcard/"romname", installation aborted"
so i seaarched and i rename to update.zip still got the same error ,if i change it to "update" only it does not show up.
so somwhere i read to extract thee files and place in sdcard root and choos boot from ad sd , so i did that ,it loaded htc hd2 image on bottom it says NDT series by langthang" and it is stuck there not moving forward...i know i am doing something wrong i searched alot i tried to get back on "NexusHD2-Gingerbread_V3.2a_NAND_(Android-2.3.7)" it also gives the same error saying cant open bla bla i downloaded winmo went into bootloader tried to install winmo but it gets stuck on 0% please help i read tons of posts i searched alot after doing everything i came to get help from you
edit:i tried to restore and it says md5 mismatch
thanx

If you mounted sd card in CWM do not press back button!
Sd is still mounted...so press call button or restart your phone, boot into CWM and try again to flash your rom.

Khan_ said:
hello guys i had NexusHD2-Gingerbread_V3.2a_NAND_(Android-2.3.7) on my htc hd2 then i wanted to use this rom
so after installing MAGLDR113 and CWR 5.0.2.6 i rebooted and created partition then i pressed mount and storage and pressed mount usb storage copied the the file name "NexusHD2-Gingerbread_V3.2a_NAND_(Android-2.3.7).zip" onto sd card and when i pressed choose zip from sd card and tried to install this it gave me error
"finding package, opening package, cant open /sdcard/"romname", installation aborted"
Click to expand...
Click to collapse
corrupted download? interrupted transfer? always try copying across / downloading it again before you do anything else.
so i seaarched and i rename to update.zip still got the same error ,if i change it to "update" only it does not show up.
so somwhere i read to extract thee files and place in sdcard root and choos boot from ad sd , so i did that ,it loaded htc hd2 image on bottom it says NDT series by langthang" and it is stuck there not moving forward...
Click to expand...
Click to collapse
its a nand build so not sure it would cope with simply unpacking onto the sd card, i 'think' (i dont know, no clue about teh technicals) you have to alter something in teh init, but thats why i expect it isnt loading.
i know i am doing something wrong i searched alot i tried to get back on "NexusHD2-Gingerbread_V3.2a_NAND_(Android-2.3.7)" it also gives the same error saying cant open bla bla i downloaded winmo
Click to expand...
Click to collapse
which one? full filename please, also the version hd2 (regular, tmous) and its source, bought unlocked? branded from a provider? details are king when troubleshooting
went into bootloader tried to install winmo but it gets stuck on 0% please help i read tons of posts i searched alot after doing everything i came to get help from you
Click to expand...
Click to collapse
stuck at 0% usually points to the wrong rom for your phone, and/or no hspl installed. look in bootloader, whats teh spl line say?
edit:i tried to restore and it says md5 mismatch
Click to expand...
Click to collapse
theres a few threads about fixing md5 sums, read them yet?
thanx
Click to expand...
Click to collapse
i would suspect a dodgy sd card, but thats only a first general guess based on little information.

icke said:
If you mounted sd card in CWM do not press back button!
Sd is still mounted...so press call button or restart your phone, boot into CWM and try again to flash your rom.
Click to expand...
Click to collapse
did that no luck
samsamuel said:
corrupted download? interrupted transfer? always try copying across / downloading it again before you do anything else.its a nand build so not sure it would cope with simply unpacking onto the sd card, i 'think' (i dont know, no clue about teh technicals) you have to alter something in teh init, but thats why i expect it isnt loading.which one? full filename please, also the version hd2 (regular, tmous) and its source, bought unlocked? branded from a provider? details are king when troubleshootingstuck at 0% usually points to the wrong rom for your phone, and/or no hspl installed. look in bootloader, whats teh spl line say?
theres a few threads about fixing md5 sums, read them yet?
i would suspect a dodgy sd card, but thats only a first general guess based on little information.
Click to expand...
Click to collapse
ya as i said i did alot of search with no luck .
so finally i just installed
Code:
XXX.jayceooi.com/2011/01/14/how-to-install-windows-phone-7-on-htc-hd2-video/
but srsly i dont like but atleast it ws very simple to install,is there any way to install nand android just like this cuz i didnt find any
again thanx for replies guys

let me know if you still want to install nand android...i can guide you..and possibly fight with you till u install it successfully

I have written a guide that makes it super easy to install. If you still have problems just post in my thread or pm me
Sent from my HD2 using xda premium

It looks like a bad download.
But at first, check if your HSPL has version 2.08, and flash it, if it is other version.
Then check Radio version (2.15.50.14) and flash it, if it is other verion.
Do task29 and install afterwards magldr and recovery with right size for your rom.
Partiion you SD-Card like it should and wipe all you find (partition will delete all your data on sd-card).
Copy downloadet zip to sd card and install it.
These are only basic steps. More details you find here:
http://forum.xda-developers.com/showthread.php?t=905841
Have fun

gdsbalaji said:
let me know if you still want to install nand android...i can guide you..and possibly fight with you till u install it successfully
Click to expand...
Click to collapse
i really appreciate that bro ...yeah i really want android back on my hd2
kylew1212 said:
I have written a guide that makes it super easy to install. If you still have problems just post in my thread or pm me
Sent from my HD2 using xda premium
Click to expand...
Click to collapse
i ll look into it definitely.
Taco123 said:
It looks like a bad download.
But at first, check if your HSPL has version 2.08, and flash it, if it is other version.
Then check Radio version (2.15.50.14) and flash it, if it is other verion.
Do task29 and install afterwards magldr and recovery with right size for your rom.
Partiion you SD-Card like it should and wipe all you find (partition will delete all your data on sd-card).
Copy downloadet zip to sd card and install it.
These are only basic steps. More details you find here:
http://forum.xda-developers.com/showthread.php?t=905841
Have fun
Click to expand...
Click to collapse
HSPL version is 2.08 i dont know about that radio version but i tried installing radio from provided in "easyandroid by kevin" and it also got stuck on 0%.did task 29 installed magdlr 1.13 and CWR 3.2.0.0 (also tried the latest version of CWR 5.0.2.8 i think) formated sd card did a partition as well mounted usb storage from ad recovery rebooted it the again went to ad recovery and pressed choose from sd card it goves me that error "installation aborted.
just a quick question i have these roms on my computer
http://forum.xda-developers.com/showthread.php?t=905060
http://forum.xda-developers.com/showthread.php?t=1013852
what should be the neccesary steps to install these i read the both developers guides but there is something that i am missing...
i hv DFT windows 7 installed on my hd2 so what should i do to get android back.
what is Clk i did not installed that in my view was clk is same thing like magdlr so i skipped installing that n i had (hspl 2.08,magdlr 1.13 and cwr 3.2.0.0) only
is this the problem causing?
regards

here are steps for ya
files you need: (if you need pm me)
-task29
-Radio Leo 2.15.50.14
-DFT_LEO_MAGLDR113_DAF
-Recovery_150M_system_5M_cache
-rom zip (dont alter/extract zip if you done know wat to do with this)
do these: (from your current WP7 rom)
-restart device
-get into tricolor bootloader
-plug usb...hd2 should say 'USB'
-do a task 29
-get into bootloader again
-plug usb...hd2 should say 'USB'
-install radio by running 'CustomRUU.exe'
-get into tricolor bootloader
-plug usb...hd2 should say 'USB'
-run DAF.exe for installing MAGLDR
-reboot
-get into MAGLDR by holing power/end key while booting
-go to 'usb flasher' in the menu and press green/call button
-plug usb...hd2 should say 'USB'
-wait till it say 'wait usb...usb'
-get into your recovery folder
-run daf.exe
-reboot post completion
-get into MAGLDR by holing power/end key while booting
-get into ad-recovery
-get into mount storage
-activate usb mass storage
-now put the rom zip files into sd card
-press power to get back to recovery menu
-select install rom from sdcard
-choose rom file
-select install
this should typically install nandroid into your hd2...
if you face any issues, share the step and the error scenario/msg

gdsbalaji said:
here are steps for ya
files you need: (if you need pm me)
-task29
-Radio Leo 2.15.50.14
-DFT_LEO_MAGLDR113_DAF
-Recovery_150M_system_5M_cache
-rom zip (dont alter/extract zip if you done know wat to do with this)
do these: (from your current WP7 rom)
-restart device
-get into tricolor bootloader
-plug usb...hd2 should say 'USB'
-do a task 29
-get into bootloader again
-plug usb...hd2 should say 'USB'
-install radio by running 'CustomRUU.exe'
-get into tricolor bootloader
-plug usb...hd2 should say 'USB'
-run DAF.exe for installing MAGLDR
-reboot
-get into MAGLDR by holing power/end key while booting
-go to 'usb flasher' in the menu and press green/call button
-plug usb...hd2 should say 'USB'
-wait till it say 'wait usb...usb'
-get into your recovery folder
-run daf.exe
-reboot post completion
-get into MAGLDR by holing power/end key while booting
-get into ad-recovery
-get into mount storage
-activate usb mass storage
-now put the rom zip files into sd card
-press power to get back to recovery menu
-select install rom from sdcard
-choose rom file
-select install
this should typically install nandroid into your hd2...
if you face any issues, share the step and the error scenario/msg
Click to expand...
Click to collapse
i used to get stuck on 0% while installing radio...i am at office so i downloaded these files again(image attatched) .i will try to install when i get back to home with your instruction given and will post what ever result i get.

Khan_ said:
i used to get stuck on 0% while installing radio...i am at office so i downloaded these files(image attatched) .i will try to install when i get back to home with your instruction given and will post what ever result i get.
Click to expand...
Click to collapse
good luck.

gdsbalaji said:
good luck.
Click to expand...
Click to collapse
everything worked smooth untill the final test
i mounted usb storage copied HD2_NDT_GINGER_2.3.7_CM7.2_BASED_V35.0_MAGLDR clicked power button selected install zip from sd card then selected choose zip from sd card selected HD2_NDT_GINGER_2.3.7_CM7.2_BASED_V35.0_MAGLDR and selected Yes .
it says
installing :/sdcard/HD2_NDT_GINGER_2.3.7_CM7.2_BASED_V35.0_MAGLDR
Finding update package
Opening Update Package
E:cant open /sdcard.HD2_NDT_GINGER_2.3.7_CM7.2_BASED_V35.0_MAGLDR
(bad)
installation aborted
same old issue what i was getting.
edit:it was the sd card ...i changed the sd card copied rom and installed it smoothly thanks a ton bud i really appreciate the help u gave .God bless ya

Glad it worked dude...hv fun
Sent from my HTC HD2 using XDA App

[Q] bricked phone? cLK screen only with messages?

Hi,
I am not very experienced with android installation and after trying few times now the phone is maybe bricked?
I only have cLK black screen with some lines of text (such as MsDOS prompt).
How can I fix it?
I would like to install either Windows 7 or Android 4.04.
Which one is better/faster?
But first I need to fix the phone if possible?

hrcoprco said:
Hi,
I am not very experienced with android installation and after trying few times now the phone is maybe bricked?
I only have cLK black screen with some lines of text (such as MsDOS prompt).
How can I fix it?
I would like to install either Windows 7 or Android 4.04.
Which one is better/faster?
But first I need to fix the phone if possible?
Click to expand...
Click to collapse
The screen you see with the text is just clk it self. Because you do not have a ROM for clk to boot you are seeing this screen. Click on the HD2 guid in my link and it will walk you through how to instll Clockwork Mod Recovery so you can flash a ROM. Or ypou can use the HD2 NAND Toolkit to flash Clockwork Mod Recovery. Or you can also just download the latest version of clk that is also linked in my guide also as it already has Clockwork Mod Recovery included with it.

Thanks for help and info.
I guess this is the link you are referring to:
http://forum.xda-developers.com/showthread.php?t=1021837
?
There are so many options, I have no idea where to start? What is the most simple solution? And how do I put Android on it?
Also, I am not sure if my battery is about 30% full, is it possible to charge it before I proceed. The red light does not come on.
Thanks

Hi
If you want to change your ROM with one another like Android NAND ROM or Windows 6.5 ROM, then use this steps.
For NAND Android ROM; You must flollow this sequence;
first check your device if it is 2.08.HSPL, and format your sdcard ext3 or ext4 and 1gb primary (which one you must use is pointed out by your Android chief). Copy new Android ROM into your sdcard's FAT32 (it must be primary again) section. insert it into your HTC device.
1. do task29
2. install radio rom 2.15.50.14
3. install magldr 1.13
4. do recovery 5.0.2.6
5. do clear cache and dalvik cache.
6. Choose your android ROM .zip file on sdcard, load and enjoy...
For Windows 6.5 Follow this sequence;
Choose a proper win 6.5 ROM for you and, check your device if it is 2.08.HSPL, Format your sdcard like FAT 32 primary partition. insert it into your HTC device.
1. do Task29
2. Install Radio ROM 2.15.50.14
3. Run LeoCustomRUU.exe like "Run as Administrator" which Windows 6.5 rom you chose to use.
HD2Toolkit ; it contains Task29, Magldr, Recovery, Clk and HSPL tools.
www.mediafire.com/?2qz0xa7xfxney47
Radio ROM 2.15.50.14;
www.mediafire.com/?1th8o158r2t6dba
Or more simple one
-Take any "RUU_signed.nbh" from an original win 6.5 ROM and copy it to your SD card.
- Rename to "leoimg.nbh"
- Reset your device while pressing the volume down button.
regards...

Sorry guys, it sounds to complicated to me.
How do I format those partitions?
Any software?
do I do it from PC?
my phone is not working at present
I would like to install latest android though.
Regards

http://www.youtube.com/watch?v=PLxiKkmXHVQ&feature=related
Yes you can do it from your PC. Please watch this video. It will give you some instruction.
Or read this one, cause more easy..
http://forum.xda-developers.com/wiki/SD_card_partitioning
This is the link what you want;
http://www.partitionwizard.com/download.html
**Download "Home" edition.
And please use "Thanks" button.
Regardss.

powerofthink said:
http://www.youtube.com/watch?v=PLxiKkmXHVQ&feature=related
Yes you can do it from your PC. Please watch this video. It will give you some instruction.
Or read this one, cause more easy..
http://forum.xda-developers.com/wiki/SD_card_partitioning
This is the link what you want;
http://www.partitionwizard.com/download.html
**Download "Home" edition.
And please use "Thanks" button.
Regardss.
Click to expand...
Click to collapse
Will do that now, it seems easier now.
What to I do in order to install latest android?
Step by step if possible?
Regards

Which Android ROM do you have in hand? Did you look for any android ROM, or which one do you want?
Some steps depends on your ROM which you have chosen.
I am still using an old Android ROM. You must choose a ROM firstly.

First off all the SD card partitioning is not needed to get Android running on your HD2. No offense to powerofthink but they are making this way more complicated than it has to be. The only real thing you need to be sure of is that your SD card is formatted with Fat 32, But most SD cards come formatted this way.
Now download clk 1.5 by Rick_1995, from his clk thread. This version already has Clockwork Mod Recovery included in it so you will have CWM when you flash this file. You flash it just like you flashed the other versionn of clk you flashed before.
Next download the ROM of your choice. Then boot into CWM by holding down the home button while you boot your HD2 up. When you see CWM appear on the screen use the volume buttons to scroll down to "Mounts and storage" and press the send button. Next connect your device to your computer via USB cable and then scroll down to "-mount USB storage" and press the send button. This will allow you to transfer your ROM's .zip file to your SD card by allowing your computer to mount your SD card as a removable. Go to the Windows Start Menu and click on computer and you should see your SD card listed as a removable drive, click on it then copy and past your ROM .zip file to your SD card. Once you have your ROM transferred to your SD card go back to your device and go back to the main menu of CWM by pressing the back button on your device. This will on mount your SD card from your computer. Next scroll down to "-install zip from sdcard" in the main menu of CWM and press the send buttonn. Then scroll down to "-choose zip from sdcard" and press the send button. Now scroll down until you see the .zip file for your ROM and select it by pressing the send button. Select yes in the next menu and let the ROM install. After the ROM is done installing use the back button to go back to the main menu of CWM and select reboot now. Then just let yopur device boot all the way up to the lock screen of the ROM and unlock it and go through the setup.
It is no need to partion when you use clk because clk does all the partitioning for you, unlike MAGLDR which you have to manually re partition manually when you change ROMs.

well I would like to install latest 4.04 ice cream sandwich, but modded for speed if possible?
my card is formatted in fat32 8gig.
Any links for that sort of ROM including procedure for beginners?
I am even more confused now
cheers

I can not do anything.
When I try to either use MAGLDR or cLK, phone responds more and less, but when it comes to progress bar it stays at 0% all the time regardless what procedure I want to do.
e.g.
Starting To Perform MAGLDR Installation
Setting Up Environment for MAGLDR
Starting Installation in 3
Starting Installation in 2
Starting Installation in 1
Checking phone for information!
Starting MAGLDR Installation, Check progress on Phone screen.
Is it a problem that I have cLK installed from before, in cLK progress is also at 0%.
I tried to use official Windows ROM 6.5 from HTC page but does not work too.
Did I brick the phone?