Database Users

[Q] [Help] Can't get any Os on my Leo :(

I followed this guide:
w w w.jayceooi.com/2011/01/07/how-to-install-nand-android-on-htc-hd2-with-clockworkmod-recovery-video
and now i dont have any OS on my htc, it just sais
booting android from nand
and it keeps getting stuck at Go Go GO!!
help me!

hallamartin said:
I followed this guide:
w w w.jayceooi.com/2011/01/07/how-to-install-nand-android-on-htc-hd2-with-clockworkmod-recovery-video
and now i dont have any OS on my htc, it just sais
booting android from nand
and it keeps getting stuck at Go Go GO!!
help me!
Click to expand...
Click to collapse
I would get another ROM and reflash it, whether it's a ZIP ROM (CWM) or a NAND ROM via DFT.

it would be awsome if you could send me a link to a good rom? android or windows? realy need this to work

hallamartin said:
it would be awsome if you could send me a link to a good rom? android or windows? realy need this to work
Click to expand...
Click to collapse
Well there's lots of good roms out there... they are all very easy to flash back and forth from. I hate to say which one is "better" than another as that is purely subjective and everyone has a differing opinion. However, it seems a lot of people really like Sergios, MDJ's and CMYXLGO's ROMs. As a start you may want to check out one of those... Here is a link to the main Android NAND forum.

I have
•HSPL3 ~ SPL-2.08.HSPL
•Radio that support 576 RAM
•DFT MAGLDR Bootloader
•ClockworkMod Recovery
Installed.
Can you send a link to a rom that supports clockwork? i dont realy care witch one just one that works. am e newbie in this just got the phone yesterday, and now i kinda afraid i cant fix it :/ :/

hallamartin said:
I have
•HSPL3 ~ SPL-2.08.HSPL
•Radio that support 576 RAM
•DFT MAGLDR Bootloader
•ClockworkMod Recovery
Installed.
Can you send a link to a rom that supports clockwork? i dont realy care witch one just one that works. am e newbie in this just got the phone yesterday, and now i kinda afraid i cant fix it :/ :/
Click to expand...
Click to collapse
If it turns on and will boot to the bootloader, it's fixable So don't worry that much! Try out Sergio's ROM. It supports CWM. If you do use that one be sure to back up your SD card as you have to repartition it.
The steps to install it are:
Code:
HD2 COREDROID Desire HD V1
1. Extract downloaded zip to a folder of your choice
2. Copy contents of copy_to_sd_root (initrd.gz and zImage) to the root of your sd card
3. Boot into magldr and select USB Flasher option while phone is connected to PC
4. Run DAF.exe included in the zip and follow onscreen instructions.
5. After complete devise will reboot in magldr chose "Boot AD SD" option
6. Device will boot into Clockwork Recovery
7. Select advanced
8. Select Partition SD card (remember too backup all valuable data you have on SD Card)
9. Selet (minimum 512M)(maximum 1024M) Chose what fits best for you Recomended size 1024M
10.Select Swap 0M
11.Wait for the process too finish (do not restart device stay in ClockWork recovery)
12.Connect the Device into USB
13.select mounts and storage
14.select mount USB storage
15.Copy contents of copy_to_sd_root (initrd.gz, zImage) to the root of your sd card
16.Copy CoreDroid_HD_HD2_v*.zip to the root of your sd card
17.Press back key after finish
18.Press back key once more
19.Select install zip from sdcard
20.Select choose zip from sdcard
21.Select CoreDroid_HD_HD2_v* file and then confirm
22.Wait for it too finish
23.After flash options pop up again Press back Key
24.select reboot system now
25.Let it boot wait about +-10Min Enjoy

I haven't really examined the guide you followed that much, but make sure you have installed a recent version of Magldr (i.e. the one you can download in the official Magldr thread in the WinMo subforum, version 1.11 to be precise). The first version(s) have been notorious for the Gogogo! bug persistently affecting some users.
Just a fyi, ignore this if you already have this v1.11

I got the aMagldr V1.11
The rom you sendt me doesnt work, it stopps here:
Run DAF.exe included in the zip and follow onscreen instructions.
i allredy installed a Daf.exe can that be the problem?

hallamartin said:
i allredy installed a Daf.exe can that be the problem?
Click to expand...
Click to collapse
No, because it's not really an installer, but a flasher. I'm not really an expert on the CWM issues, but it seems to me like formatting your SD card(do a full format, not the quick one) might help you, since it's quite probably your SD card being the *****.
It may not help you, but if you've got a few minutes I'd say give it a shot. Don't forget to backup important SD (NAND isn't affected) first of course!
Oh, and there's also this small chance that your CWM download is corrupt. Not sure if that would give the gogogo error though.

Sorry for being a complete newb, but how do i do the hard format?
but do i need the DAF.exe to install the rom?

You'd have to format in Windows (which I assume is the OS you're running), which now that I think of it may be a bit of a problem. I don't think you can mount your SD card with Magldr, which means that you'd have to use an external card reader. If you don't have that, you'd have to reflash WinMo to format, but since that's quite some more work for something that I can't even guarantee to be a solution you might wanna hold on to other suggestions.
DAF.exe is the tool which flashes CWM to your phone. Some other tools and/or ROMS use the same name for their flasher though.

after this one :
8. Select Partition SD card (remember too backup all valuable data you have on SD Card)
9. Selet (minimum 512M)(maximum 1024M) Chose what fits best for you Recomended size 1024M
10.Select Swap 0M
i can't do **** i cant open the device in windows. is there no way i can just system recover the whole device? or do i have to rom it?..
realy need this to be working, prefer android but windows is okey

StephanV said:
You'd have to format in Windows (which I assume is the OS you're running), which now that I think of it may be a bit of a problem. I don't think you can mount your SD card with Magldr, which means that you'd have to use an external card reader. If you don't have that, you'd have to reflash WinMo to format, but since that's quite some more work for something that I can't even guarantee to be a solution you might wanna hold on to other suggestions.
Click to expand...
Click to collapse
dosn't seem like there is allot of things i can do? i just hope i didnt brick it...
i cant send it to repair like this?

hallamartin said:
dosn't seem like there is allot of things i can do? i just hope i didnt brick it...
i cant send it to repair like this?
Click to expand...
Click to collapse
It sure is no brick, as long as you can boot into bootloader (turn on phone while keeping volume down pressed) there's no problem at all. No need to return it either.
If you feel really desperate try the WinMo thing, you've got nothing to lose except for about 30 minutes of your time.

winmo thing? is there any guide?
if i download a format program i can format the sd card..

1. Flash WinMo, this should be no problem in bootloader
2. I think it's possible to format your SD card within WinMo. I've never used WinMo actually so I can't give instructions on that.
If you can't find it or if it isn't possible, mount your SD card so you can see it in Windows. Backup data if necessary. Then right click on it (in Windows), and choose format, then disable quick format which should be selected by default. After the format you should have a clean SD card.
4. Flash Magldr again, following instructions in the official Magldr thread. Download a new copy off xda, to eliminate the possibity of just having had a corrupt download.
6. Flash CWM, following instructions in the official CWM thread.
7. Flash ROM.
Edit: I used WinMo where I meant the mobile OS, and Windows where I meant the pc OS.

I did format the SD card, nothing new just that CWM disapeard.
Now its loading with aMagldr v1.11
And i Have Spl-2.08. Hspl 8g Xe
Can anyone send me a link to a good Win 6.5 rom and anykind of guide?

I Can't install any NAND on my HTC HD2

hi together,
i have many problems with my HD2, i have try to install a nand over MAGLDR v1.13 + DAF but when i try to install it with ROMUpdateUtility.exe it loads and i can click update, but then nothing happens only 0% nothing more.
I try it then with another tutorial that told me to install a radio first, but the same problem it loads 4% and told me that i have a wrong version or handy or somtehing.
Can someone Help me or told me hhow i can install it on another way?

you run daf.exe not the file you are running

heima77 said:
hi together,
i have many problems with my HD2, i have try to install a nand over MAGLDR v1.13 + DAF but when i try to install it with ROMUpdateUtility.exe it loads and i can click update, but then nothing happens only 0% nothing more.
I try it then with another tutorial that told me to install a radio first, but the same problem it loads 4% and told me that i have a wrong version or handy or somtehing.
Can someone Help me or told me hhow i can install it on another way?
Click to expand...
Click to collapse
You Need to start Over ..
I Would Task29 - then follow the directions here ..
Has everything you need ..
http://forum.xda-developers.com/showthread.php?t=981811

heima77 said:
nothing happens only 0% nothing more.
Click to expand...
Click to collapse
Wrong / missing hspl. Check in bootloader.
Hspl4, 2.08.hspl

thank you i have update the hspl to 2.08 and installed MAGLDR and i have installed an old Android, i want a newer one but my problem ist, the most NAND versions have only and unpacked version of android and i dont understand how i can install them with the DAF.exe because there is no system.img or something or what do i wrong?
i want to install one of this 2 versions:
http://forum.xda-developers.com/showthread.php?t=908528
http://forum.xda-developers.com/showthread.php?t=918899
or can you told me another good android 2.3 nand that i can easy install?
important for me is that there is no freeze and a good battery life and that i can install apps.
another question how can i use the micro sd card?
thanks a lot

Once in magldr u need to choose usb flasher and then connect ur fone with ur computer and click daf.exe it should do it on its own
Sent from my HTC HD2 Gingerbread using XDA App

thx, what im not understand, where must i put the folder: META-INF boot and system?
when the DAF.exe runes it says it cant load the readme.txt and when im click next there comes more erros i think it cant find the .img type file?

I think you are totally confused with files.better do some tutorial reading and start all afresh
Sent from my HTC HD2 Gingerbread using XDA App

im reading the tutorials but im not really understand why it dont work, now i have try the MDJs cya... but the same problem with the daf.exe here the error message:
An error has occurred
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (736)
Error Description: EnterBootloader missing
Info: .\RSPL\BootLoader.cpp (176)
what must i dooo?

The problem is that the roms u r flashing needs recovery mod..after flashing magloder u need to flash recoverymod 400mb file system via usb flasher and then format ur sd card according to to description in the rafpignas thread..once done wiyh all that copy paste the whole zip folder on sd card dont extract anything and then follow the steps on rafpignas thread to install via recovery
Sent from my HTC HD2 Gingerbread using XDA App

thank you now i found the right clockwork flash its very easy thank you very much.
post can be closed

Glad u found it ur welcome
Sent from my HTC HD2 Gingerbread using XDA App

arzin said:
The problem is that the roms u r flashing needs recovery mod..after flashing magloder u need to flash recoverymod 400mb file system via usb flasher and then format ur sd card according to to description in the rafpignas thread..once done wiyh all that copy paste the whole zip folder on sd card dont extract anything and then follow the steps on rafpignas thread to install via recovery
Sent from my HTC HD2 Gingerbread using XDA App
Click to expand...
Click to collapse
im at this point now but im stuck on how to get the zip onto my sd card
i tried magldr mass storage but it wont copy over completely
someone please help

jonsson4000 said:
im at this point now but im stuck on how to get the zip onto my sd card
i tried magldr mass storage but it wont copy over completely
someone please help
Click to expand...
Click to collapse
I've heard that Magdlr has some problems corrupting larger file transfers. Personally, I've never experienced it with v1.13. You can try using a microSD adapter and transfer it directly from your computer to the SDcard, from then on, transfer files in Android before you decide to flash.

h.nocturna said:
I've heard that Magdlr has some problems corrupting larger file transfers. Personally, I've never experienced it with v1.13. You can try using a microSD adapter and transfer it directly from your computer to the SDcard, from then on, transfer files in Android before you decide to flash.
Click to expand...
Click to collapse
thats what i usually do but since i started from square one and formatted my sd card i have nothing

jonsson4000 said:
thats what i usually do but since i started from square one and formatted my sd card i have nothing
Click to expand...
Click to collapse
Flash CWM, then use the USB Mass Storage function from the partitions menu as another method.

h.nocturna said:
Flash CWM, then use the USB Mass Storage function from the partitions menu as another method.
Click to expand...
Click to collapse
figured out how to do it through clockwork thanks for your help

missing hspl

Noob help I've read tons and haven't seen this HD2 nand problem

I was in the process of installing ( NexusHD2-Gingerbread_V2.7_NAND_(Android-2.3.4)_update.zip) I tried posting in the other thread but can't since I don't have enough posts.
Anyhow I went through all the steps on the gingerbread installation page ( http://forum.xda-developers.com/showthread.php?t=905060 ) and everything was going well until I hit the flash stage.
When I'm in (magldr v1.13) Magldr at #8 "AD recovery" (already did the wipe) the next steps says to "install zip from sdcard"
The problem is I didn't put the zip file on my sd card because no where did read that it had to be done. I thought that was the thing with NAND was you didn't need to use your sd card.
Now my phone just boots into magldr. Does anyone know how I can install from the file on my desktop instead of off my sd card? or do I need to reinstall win-mobile and start over?
Thanks for any help...

Spothra said:
I was in the process of installing ( NexusHD2-Gingerbread_V2.7_NAND_(Android-2.3.4)_update.zip) I tried posting in the other thread but can't since I don't have enough posts.
Anyhow I went through all the steps on the gingerbread installation page ( http://forum.xda-developers.com/showthread.php?t=905060 ) and everything was going well until I hit the flash stage.
When I'm in (magldr v1.13) Magldr at #8 "AD recovery" (already did the wipe) the next steps says to "install zip from sdcard"
The problem is I didn't put the zip file on my sd card because no where did read that it had to be done. I thought that was the thing with NAND was you didn't need to use your sd card.
Now my phone just boots into magldr. Does anyone know how I can install from the file on my desktop instead of off my sd card? or do I need to reinstall win-mobile and start over?
Thanks for any help...
Click to expand...
Click to collapse
Just click on the guide link in my SIG, it tells you how to copy the file to your SD card with MAGLDR or CWM
Look for option #4 of MAGLDR or Mounts and Storage in Clockwork Mod Recovery.

I'll try that thank you...

Thanks a million for the assist. It took a few times trying, the connection kept failing but on the fourth try it fully transferred the file and it's been easy sailing since then...

[Q] installing nan on hd2 PLEASE HELP NEEDED!

hi all i'm trying to install a nand build with magldr everything works fine and i follow the right steps untill i say to cwm load zip file from sd.
tried several roms with unpacking the intrd file with unrar/winzip/7zip
nothing works because my phone doesn't see the file
also tried to install the rom with and without system ,meta info,boot
only boot,only initrd.
tried everything only thing that did work was an old android build through the daf method.
who can help me and give me detaild clue's to let my phone work with a nandr build.
please help me!!!!

ikkeenjij36 said:
hi all i'm trying to install a nand build with magldr everything works fine and i follow the right steps untill i say to cwm load zip file from sd.
tried several roms with unpacking the intrd file with unrar/winzip/7zip
nothing works because my phone doesn't see the file
also tried to install the rom with and without system ,meta info,boot
only boot,only initrd.
tried everything only thing that did work was an old android build through the daf method.
who can help me and give me detaild clue's to let my phone work with a nandr build.
please help me!!!!
Click to expand...
Click to collapse
Hi,
I notice in your sig ,3.03 HSPL.
You should try with 2.08 HSPL.
The other thing is when you download the ROM,it comes as a zip file.DO NOT extract it.Just place it on the root of your sd card.
Before starting anything,BACKUP YOUR DATA.
Download THIS TOOL (Don't forget to thank him for his work)
Flash radio...download HERE Enter bootloader:hold down volume button when you power on phone.When you are on tri-color screen,insert cable to usb.When screen changes from "serial"to "usb",proceed.
Open HD2 Installer:
Task 29 (Enter bootloader:as above)
HSPL 2.08 HSPL (Enter bootloader:as above)
MAGLDR (Enter bootloader:as above)
(when magldr has loaded,power on and enter by holding power button until you see magldr screen.)
Repartition according to ROM requirements.(via number 5 usb flasher)
(when this is done,Go to ad recovery>advanced>Partition SD Card.1024m with 0 swap)Remember: ALL data on your SD Card will be erased!(Therefore,back it up)
Then go to ad recovery and wipe data,cache partition,and dalvik(advanced).
Then go to install zip from sd card
Choose zip from sd card (which you should have placed on the root of your sd card,using a card reader)
After installation,reboot.
Give it time.
Some ROMS take 15-20 minutes to install.

ikkeenjij36 said:
hi all i'm trying to install a nand build with magldr everything works fine and i follow the right steps untill i say to cwm load zip file from sd.
tried several roms with unpacking the intrd file with unrar/winzip/7zip
nothing works because my phone doesn't see the file
also tried to install the rom with and without system ,meta info,boot
only boot,only initrd.
tried everything only thing that did work was an old android build through the daf method.
who can help me and give me detaild clue's to let my phone work with a nandr build.
please help me!!!!
Click to expand...
Click to collapse
Why the hell are you asking for help when you obviously havent even bothered to read a god damn thing?
Where did it tell you to extract the zip file??????
Please stop creating topic before even reading the simplest of instructions in the rom thread or any for the guides or stick topics, all your doing is cluttering up the forum for people who bother to look for the info.

@TheAtheist thnx for your support great to be helped
in answer did read other topics and instructions and even had help from dev and he didn't now what the f**k goes wrong.
@malybru thnx for your support and help tried all the things you said and haven't changed my sig but have radio 2.18 on my phone with hspl2.08
when i put the zip fil in my root en through cwm go to install zip file from sd card he doesn't see any zip or other file so thath is my problem.after doing all you said my phone says now E:failed ro mount /sdcard(no such file or directory)
E:can't mount /sdcard
any advice?

ikkeenjij36 said:
@TheAtheist thnx for your support great to be helped
in answer did read other topics and instructions and even had help from dev and he didn't now what the f**k goes wrong.
@malybru thnx for your support and help tried all the things you said and haven't changed my sig but have radio 2.18 on my phone with hspl2.08
when i put the zip fil in my root en through cwm go to install zip file from sd card he doesn't see any zip or other file so thath is my problem.
any advice?
Click to expand...
Click to collapse
Use a different sdcard or try properly formatting it. Use Panasonic sdformatter full+overwrite and size adjustment on.
Also task29 your device then re-install magldr.
Also you saif you read topics but you didn't read them properly otherwise you wouldn't be trying to extract the cwm zip file folders.

used panasonic all you said but device says still can't mount sd card and i'm not in position to put in ohter sd card all shop's are closed here?
can still flash the old rom with darkforces method
and my sd card is recosnisged with that build .
is this sdcard prob after all thiss trouble?
herefor (last week)device did see my sd card

ikkeenjij36 said:
used panasonic all you said but device says still can't mount sd card and i'm not in position to put in ohter sd card all shop's are closed here?
can still flash the old rom with darkforces method
and my sd card is recosnisged with that build .
is this sdcard prob after all thiss trouble?
herefor (last week)device did see my sd card
Click to expand...
Click to collapse
Hi,
I read somewhere that when the sd card cannot be recognised,it might be something to do with the VERSION of recovery you have.
Try to use the toolkit to DOWNGRADE recovery and see if that is successful...

[Q] bricked phone? cLK screen only with messages?

Hi,
I am not very experienced with android installation and after trying few times now the phone is maybe bricked?
I only have cLK black screen with some lines of text (such as MsDOS prompt).
How can I fix it?
I would like to install either Windows 7 or Android 4.04.
Which one is better/faster?
But first I need to fix the phone if possible?

hrcoprco said:
Hi,
I am not very experienced with android installation and after trying few times now the phone is maybe bricked?
I only have cLK black screen with some lines of text (such as MsDOS prompt).
How can I fix it?
I would like to install either Windows 7 or Android 4.04.
Which one is better/faster?
But first I need to fix the phone if possible?
Click to expand...
Click to collapse
The screen you see with the text is just clk it self. Because you do not have a ROM for clk to boot you are seeing this screen. Click on the HD2 guid in my link and it will walk you through how to instll Clockwork Mod Recovery so you can flash a ROM. Or ypou can use the HD2 NAND Toolkit to flash Clockwork Mod Recovery. Or you can also just download the latest version of clk that is also linked in my guide also as it already has Clockwork Mod Recovery included with it.

Thanks for help and info.
I guess this is the link you are referring to:
http://forum.xda-developers.com/showthread.php?t=1021837
?
There are so many options, I have no idea where to start? What is the most simple solution? And how do I put Android on it?
Also, I am not sure if my battery is about 30% full, is it possible to charge it before I proceed. The red light does not come on.
Thanks

Hi
If you want to change your ROM with one another like Android NAND ROM or Windows 6.5 ROM, then use this steps.
For NAND Android ROM; You must flollow this sequence;
first check your device if it is 2.08.HSPL, and format your sdcard ext3 or ext4 and 1gb primary (which one you must use is pointed out by your Android chief). Copy new Android ROM into your sdcard's FAT32 (it must be primary again) section. insert it into your HTC device.
1. do task29
2. install radio rom 2.15.50.14
3. install magldr 1.13
4. do recovery 5.0.2.6
5. do clear cache and dalvik cache.
6. Choose your android ROM .zip file on sdcard, load and enjoy...
For Windows 6.5 Follow this sequence;
Choose a proper win 6.5 ROM for you and, check your device if it is 2.08.HSPL, Format your sdcard like FAT 32 primary partition. insert it into your HTC device.
1. do Task29
2. Install Radio ROM 2.15.50.14
3. Run LeoCustomRUU.exe like "Run as Administrator" which Windows 6.5 rom you chose to use.
HD2Toolkit ; it contains Task29, Magldr, Recovery, Clk and HSPL tools.
www.mediafire.com/?2qz0xa7xfxney47
Radio ROM 2.15.50.14;
www.mediafire.com/?1th8o158r2t6dba
Or more simple one
-Take any "RUU_signed.nbh" from an original win 6.5 ROM and copy it to your SD card.
- Rename to "leoimg.nbh"
- Reset your device while pressing the volume down button.
regards...

Sorry guys, it sounds to complicated to me.
How do I format those partitions?
Any software?
do I do it from PC?
my phone is not working at present
I would like to install latest android though.
Regards

http://www.youtube.com/watch?v=PLxiKkmXHVQ&feature=related
Yes you can do it from your PC. Please watch this video. It will give you some instruction.
Or read this one, cause more easy..
http://forum.xda-developers.com/wiki/SD_card_partitioning
This is the link what you want;
http://www.partitionwizard.com/download.html
**Download "Home" edition.
And please use "Thanks" button.
Regardss.

powerofthink said:
http://www.youtube.com/watch?v=PLxiKkmXHVQ&feature=related
Yes you can do it from your PC. Please watch this video. It will give you some instruction.
Or read this one, cause more easy..
http://forum.xda-developers.com/wiki/SD_card_partitioning
This is the link what you want;
http://www.partitionwizard.com/download.html
**Download "Home" edition.
And please use "Thanks" button.
Regardss.
Click to expand...
Click to collapse
Will do that now, it seems easier now.
What to I do in order to install latest android?
Step by step if possible?
Regards

Which Android ROM do you have in hand? Did you look for any android ROM, or which one do you want?
Some steps depends on your ROM which you have chosen.
I am still using an old Android ROM. You must choose a ROM firstly.

First off all the SD card partitioning is not needed to get Android running on your HD2. No offense to powerofthink but they are making this way more complicated than it has to be. The only real thing you need to be sure of is that your SD card is formatted with Fat 32, But most SD cards come formatted this way.
Now download clk 1.5 by Rick_1995, from his clk thread. This version already has Clockwork Mod Recovery included in it so you will have CWM when you flash this file. You flash it just like you flashed the other versionn of clk you flashed before.
Next download the ROM of your choice. Then boot into CWM by holding down the home button while you boot your HD2 up. When you see CWM appear on the screen use the volume buttons to scroll down to "Mounts and storage" and press the send button. Next connect your device to your computer via USB cable and then scroll down to "-mount USB storage" and press the send button. This will allow you to transfer your ROM's .zip file to your SD card by allowing your computer to mount your SD card as a removable. Go to the Windows Start Menu and click on computer and you should see your SD card listed as a removable drive, click on it then copy and past your ROM .zip file to your SD card. Once you have your ROM transferred to your SD card go back to your device and go back to the main menu of CWM by pressing the back button on your device. This will on mount your SD card from your computer. Next scroll down to "-install zip from sdcard" in the main menu of CWM and press the send buttonn. Then scroll down to "-choose zip from sdcard" and press the send button. Now scroll down until you see the .zip file for your ROM and select it by pressing the send button. Select yes in the next menu and let the ROM install. After the ROM is done installing use the back button to go back to the main menu of CWM and select reboot now. Then just let yopur device boot all the way up to the lock screen of the ROM and unlock it and go through the setup.
It is no need to partion when you use clk because clk does all the partitioning for you, unlike MAGLDR which you have to manually re partition manually when you change ROMs.

well I would like to install latest 4.04 ice cream sandwich, but modded for speed if possible?
my card is formatted in fat32 8gig.
Any links for that sort of ROM including procedure for beginners?
I am even more confused now
cheers

I can not do anything.
When I try to either use MAGLDR or cLK, phone responds more and less, but when it comes to progress bar it stays at 0% all the time regardless what procedure I want to do.
e.g.
Starting To Perform MAGLDR Installation
Setting Up Environment for MAGLDR
Starting Installation in 3
Starting Installation in 2
Starting Installation in 1
Checking phone for information!
Starting MAGLDR Installation, Check progress on Phone screen.
Is it a problem that I have cLK installed from before, in cLK progress is also at 0%.
I tried to use official Windows ROM 6.5 from HTC page but does not work too.
Did I brick the phone?