Database Users

[Q] [Help] Can't get any Os on my Leo :(

I followed this guide:
w w w.jayceooi.com/2011/01/07/how-to-install-nand-android-on-htc-hd2-with-clockworkmod-recovery-video
and now i dont have any OS on my htc, it just sais
booting android from nand
and it keeps getting stuck at Go Go GO!!
help me!

hallamartin said:
I followed this guide:
w w w.jayceooi.com/2011/01/07/how-to-install-nand-android-on-htc-hd2-with-clockworkmod-recovery-video
and now i dont have any OS on my htc, it just sais
booting android from nand
and it keeps getting stuck at Go Go GO!!
help me!
Click to expand...
Click to collapse
I would get another ROM and reflash it, whether it's a ZIP ROM (CWM) or a NAND ROM via DFT.

it would be awsome if you could send me a link to a good rom? android or windows? realy need this to work

hallamartin said:
it would be awsome if you could send me a link to a good rom? android or windows? realy need this to work
Click to expand...
Click to collapse
Well there's lots of good roms out there... they are all very easy to flash back and forth from. I hate to say which one is "better" than another as that is purely subjective and everyone has a differing opinion. However, it seems a lot of people really like Sergios, MDJ's and CMYXLGO's ROMs. As a start you may want to check out one of those... Here is a link to the main Android NAND forum.

I have
•HSPL3 ~ SPL-2.08.HSPL
•Radio that support 576 RAM
•DFT MAGLDR Bootloader
•ClockworkMod Recovery
Installed.
Can you send a link to a rom that supports clockwork? i dont realy care witch one just one that works. am e newbie in this just got the phone yesterday, and now i kinda afraid i cant fix it :/ :/

hallamartin said:
I have
•HSPL3 ~ SPL-2.08.HSPL
•Radio that support 576 RAM
•DFT MAGLDR Bootloader
•ClockworkMod Recovery
Installed.
Can you send a link to a rom that supports clockwork? i dont realy care witch one just one that works. am e newbie in this just got the phone yesterday, and now i kinda afraid i cant fix it :/ :/
Click to expand...
Click to collapse
If it turns on and will boot to the bootloader, it's fixable So don't worry that much! Try out Sergio's ROM. It supports CWM. If you do use that one be sure to back up your SD card as you have to repartition it.
The steps to install it are:
Code:
HD2 COREDROID Desire HD V1
1. Extract downloaded zip to a folder of your choice
2. Copy contents of copy_to_sd_root (initrd.gz and zImage) to the root of your sd card
3. Boot into magldr and select USB Flasher option while phone is connected to PC
4. Run DAF.exe included in the zip and follow onscreen instructions.
5. After complete devise will reboot in magldr chose "Boot AD SD" option
6. Device will boot into Clockwork Recovery
7. Select advanced
8. Select Partition SD card (remember too backup all valuable data you have on SD Card)
9. Selet (minimum 512M)(maximum 1024M) Chose what fits best for you Recomended size 1024M
10.Select Swap 0M
11.Wait for the process too finish (do not restart device stay in ClockWork recovery)
12.Connect the Device into USB
13.select mounts and storage
14.select mount USB storage
15.Copy contents of copy_to_sd_root (initrd.gz, zImage) to the root of your sd card
16.Copy CoreDroid_HD_HD2_v*.zip to the root of your sd card
17.Press back key after finish
18.Press back key once more
19.Select install zip from sdcard
20.Select choose zip from sdcard
21.Select CoreDroid_HD_HD2_v* file and then confirm
22.Wait for it too finish
23.After flash options pop up again Press back Key
24.select reboot system now
25.Let it boot wait about +-10Min Enjoy

I haven't really examined the guide you followed that much, but make sure you have installed a recent version of Magldr (i.e. the one you can download in the official Magldr thread in the WinMo subforum, version 1.11 to be precise). The first version(s) have been notorious for the Gogogo! bug persistently affecting some users.
Just a fyi, ignore this if you already have this v1.11

I got the aMagldr V1.11
The rom you sendt me doesnt work, it stopps here:
Run DAF.exe included in the zip and follow onscreen instructions.
i allredy installed a Daf.exe can that be the problem?

hallamartin said:
i allredy installed a Daf.exe can that be the problem?
Click to expand...
Click to collapse
No, because it's not really an installer, but a flasher. I'm not really an expert on the CWM issues, but it seems to me like formatting your SD card(do a full format, not the quick one) might help you, since it's quite probably your SD card being the *****.
It may not help you, but if you've got a few minutes I'd say give it a shot. Don't forget to backup important SD (NAND isn't affected) first of course!
Oh, and there's also this small chance that your CWM download is corrupt. Not sure if that would give the gogogo error though.

Sorry for being a complete newb, but how do i do the hard format?
but do i need the DAF.exe to install the rom?

You'd have to format in Windows (which I assume is the OS you're running), which now that I think of it may be a bit of a problem. I don't think you can mount your SD card with Magldr, which means that you'd have to use an external card reader. If you don't have that, you'd have to reflash WinMo to format, but since that's quite some more work for something that I can't even guarantee to be a solution you might wanna hold on to other suggestions.
DAF.exe is the tool which flashes CWM to your phone. Some other tools and/or ROMS use the same name for their flasher though.

after this one :
8. Select Partition SD card (remember too backup all valuable data you have on SD Card)
9. Selet (minimum 512M)(maximum 1024M) Chose what fits best for you Recomended size 1024M
10.Select Swap 0M
i can't do **** i cant open the device in windows. is there no way i can just system recover the whole device? or do i have to rom it?..
realy need this to be working, prefer android but windows is okey

StephanV said:
You'd have to format in Windows (which I assume is the OS you're running), which now that I think of it may be a bit of a problem. I don't think you can mount your SD card with Magldr, which means that you'd have to use an external card reader. If you don't have that, you'd have to reflash WinMo to format, but since that's quite some more work for something that I can't even guarantee to be a solution you might wanna hold on to other suggestions.
Click to expand...
Click to collapse
dosn't seem like there is allot of things i can do? i just hope i didnt brick it...
i cant send it to repair like this?

hallamartin said:
dosn't seem like there is allot of things i can do? i just hope i didnt brick it...
i cant send it to repair like this?
Click to expand...
Click to collapse
It sure is no brick, as long as you can boot into bootloader (turn on phone while keeping volume down pressed) there's no problem at all. No need to return it either.
If you feel really desperate try the WinMo thing, you've got nothing to lose except for about 30 minutes of your time.

winmo thing? is there any guide?
if i download a format program i can format the sd card..

1. Flash WinMo, this should be no problem in bootloader
2. I think it's possible to format your SD card within WinMo. I've never used WinMo actually so I can't give instructions on that.
If you can't find it or if it isn't possible, mount your SD card so you can see it in Windows. Backup data if necessary. Then right click on it (in Windows), and choose format, then disable quick format which should be selected by default. After the format you should have a clean SD card.
4. Flash Magldr again, following instructions in the official Magldr thread. Download a new copy off xda, to eliminate the possibity of just having had a corrupt download.
6. Flash CWM, following instructions in the official CWM thread.
7. Flash ROM.
Edit: I used WinMo where I meant the mobile OS, and Windows where I meant the pc OS.

I did format the SD card, nothing new just that CWM disapeard.
Now its loading with aMagldr v1.11
And i Have Spl-2.08. Hspl 8g Xe
Can anyone send me a link to a good Win 6.5 rom and anykind of guide?

Stops after GO GO GO at first boot

Hi
I have tried to install android on my phone and after a few attempts I finally got to the step where to install Android which works fine.
But after first boot it is written that it may take upto 20 minutes.... I have tried with different kernels with same results.... it simply stops after GO GO GO then it comes to the android screen and nothing happens... I have tried to let it be for 5 hours... still no reaction!
What I do is to copy the .zip file to my SD card and go to to the boot menu and coose "Install from zip file on SD card".
Any good ideas how to solve it?

PeterSvendsen said:
Hi
I have tried to install android on my phone and after a few attempts I finally got to the step where to install Android which works fine.
But after first boot it is written that it may take upto 20 minutes.... I have tried with different kernels with same results.... it simply stops after GO GO GO then it comes to the android screen and nothing happens... I have tried to let it be for 5 hours... still no reaction!
What I do is to copy the .zip file to my SD card and go to to the boot menu and coose "Install from zip file on SD card".
Any good ideas how to solve it?
Click to expand...
Click to collapse
You need to provide more details for folks around here to reply. Ie:
1. Which model are you using - LEO512 or LEO1024
2. Which MAGLDR was flashed. Version 1.13? Because earlier version had the freeze at GOGOGO! problem.
3. Which android build did you use (DAF build type or CWR type?)
Only then we can even start to suggest what to do to help you
Wait....Are you using builds that requires SDCards to be partitioned? If yes, did you partition as required?

PeterSvendsen said:
Hi
I have tried to install android on my phone and after a few attempts I finally got to the step where to install Android which works fine.
But after first boot it is written that it may take upto 20 minutes.... I have tried with different kernels with same results.... it simply stops after GO GO GO then it comes to the android screen and nothing happens... I have tried to let it be for 5 hours... still no reaction!
What I do is to copy the .zip file to my SD card and go to to the boot menu and coose "Install from zip file on SD card".
Any good ideas how to solve it?
Click to expand...
Click to collapse
Mate,
I experience that too. I think not all ROM can be successfully boot.
My suggestions is either try reflashing or find another ROM that works for your HD2.
Cheers

silverwind said:
Mate,
I experience that too. I think not all ROM can be successfully boot.
My suggestions is either try reflashing or find another ROM that works for your HD2.
Cheers
Click to expand...
Click to collapse
Thats odd.... I only know that the experience may vary across different units (ie: wake-up lag, power drain, etc). Never have i heard that not all builds can be successfully booted. I still think the problems has to do with settings (i.e.: config.txt, NAND partition layout, SD Card partition size and formats etc).
If you have a prob with the builds, please specify clearly which version and your configurations. Only then folks here can advice accordingly....

can't hurt...
task 29, WM6.5 rom installation, magdlr installation then flash the rom again
make shure you created ext partition on SD if required for making work the ROM (check its trhead)....

Do a fresh installation(Format SD->Task 29->Flash Radio->Flash MAGLDR->Flash CWM->Flash ROM from zip using AD recovery option in MAGLDR.. Maybe you are using an incompatible radio?

if i have this problem, i flash windows back (LEOIMG.nbh is always on my sdcard).
this will help me.
after one "no-function"-flash dont try an other flash by the same config like the config before.

I think that problem is in kernel . you trying kernel for new desire, use for N1.

tidus18 said:
You need to provide more details for folks around here to reply. Ie:
1. Which model are you using - LEO512 or LEO1024
2. Which MAGLDR was flashed. Version 1.13? Because earlier version had the freeze at GOGOGO! problem.
3. Which android build did you use (DAF build type or CWR type?)
Only then we can even start to suggest what to do to help you
Wait....Are you using builds that requires SDCards to be partitioned? If yes, did you partition as required?
Click to expand...
Click to collapse
Hi
I have no idea if it is a 1024 or 512! How do I find out?
I use MAGLDR 1.13
I have tried to install
RAFDROID HD 4.0.2|Fastest Full DesHD|DATA2EXT|[Rafpigna 1.8 OC]
[LEO512][LEO1024]CMYLXGOs Stock Desire HD(2)[RUU1.84][RAFPIGNA 1.9OC]
and more
All with same result
I have tried to do the sd partition... .actually with 2 diffent cards but I have never been able to have 2 partitions.... I alway ends up with 1 partition on 2Gb
---
Do a fresh installation(Format SD->Task 29->Flash Radio->Flash MAGLDR->Flash CWM->Flash ROM from zip using AD recovery option in MAGLDR.. Maybe you are using an incompatible radio?
---
I tried that as well with same results
Do you recomment a specific android?
I'm totally new in this and only want a android on my phone )

tidus18 said:
Thats odd.... I only know that the experience may vary across different units (ie: wake-up lag, power drain, etc). Never have i heard that not all builds can be successfully booted. I still think the problems has to do with settings (i.e.: config.txt, NAND partition layout, SD Card partition size and formats etc).
If you have a prob with the builds, please specify clearly which version and your configurations. Only then folks here can advice accordingly....
Click to expand...
Click to collapse
I m trying to say that so many ROMs are available here.
Dont spend your time to long only to one ROM
Unless it is your favorite ROM (Chef)
Cheers...

i guess you did a ROM flash through clockworkmod? if so, did you flash the correct partition sizes (sense roms need often about 400mb /system partition). If not you need to find the 400mb clockwork recovery in this forum.
If you flashed a rom via DAF, please disregard this.
also please post in the correct forum (Q and A would be correct for this topic i believe)

joshman99 said:
i guess you did a ROM flash through clockworkmod? if so, did you flash the correct partition sizes (sense roms need often about 400mb /system partition). If not you need to find the 400mb clockwork recovery in this forum.
If you flashed a rom via DAF, please disregard this.
also please post in the correct forum (Q and A would be correct for this topic i believe)
Click to expand...
Click to collapse
Hi
I have tried to do it by DAF (reports size to big?!) and clockworkmod I have also tried with
Sorry about the trong forum, you're absolutly correct...
Update
I have now bought a new sd micro card to make a correct partition.. but I experience exactly the same... error I cant..
With program do you recomment?

PeterSvendsen said:
Hi
I have tried to do it by DAF (reports size to big?!) and clockworkmod I have also tried with
Sorry about the trong forum, you're absolutly correct...
Update
I have now bought a new sd micro card to make a correct partition.. but I experience exactly the same... error I cant..
With program do you recomment?
Click to expand...
Click to collapse
check this thread http://forum.xda-developers.com/showthread.php?t=981811 task 29 is reccommended do u have red and green call buttons on ur hd 2 or rather t mobile on top of ur screen
than we can help u accordingly
remember a wrong cwm partition might be responsible for bootloop
go for hyperdroidv10 rom it s amazing and use 135 or 150 cwm partition

shhbz said:
check this thread http://forum.xda-developers.com/showthread.php?t=981811 task 29 is reccommended do u have red and green call buttons on ur hd 2 or rather t mobile on top of ur screen
than we can help u accordingly
remember a wrong cwm partition might be responsible for bootloop
go for hyperdroidv10 rom it s amazing and use 135 or 150 cwm partition
Click to expand...
Click to collapse
use panasnic sd fromatter and frmat
http://forum.xda-developers.com/showthread.php?t=905089
or use mini partition tool
cwm is the best method to install android rom
sorry wrong quote

shhbz said:
check this thread http://forum.xda-developers.com/showthread.php?t=981811 task 29 is reccommended do u have red and green call buttons on ur hd 2 or rather t mobile on top of ur screen
than we can help u accordingly
remember a wrong cwm partition might be responsible for bootloop
go for hyperdroidv10 rom it s amazing and use 135 or 150 cwm partition
Click to expand...
Click to collapse
I have done a task29 several times already.
---
.... or rather t mobile on top of ur screen
---
I'm not sure what you ask me about. But no on my phone my call buttons is black and gray
By using panasonic formatter I only format... but the card is on 8Gb so guess I need to make a partition.
Mini partition tool doesnt work correct it report errors as soon as I ftry to format etx3

If your phone has T-mobile on top and buttons are colored red & grees - its LEO1024.
If all grey without any logo on its case/housing - then its LEO512/EURO model.
difference is the NAND size. LEO1024 has 1GB and LEO512 has 512MB.
Peter,
I'll quickly write the outline here, hopefully it helps. But detailed guide on each subject has been posted numerous times here. Please look for them.
Outline to get RAFDROID up and running (Based on your post, im assuming yours is LEO512)
1. Flash MAGLDR 1.13 (this involves entering tricolor screen and flashing like good'ol WM6.5)
2. From MAGLDR, choose USB Flasher mode (Option 4 i think...) and flash Clockwork Mod Recovery with 400MB layout. (this is important, wrong layout will cause bootloop and androd will not boot)
3. Assuming you have 2GB microSD card - Use a memcard reader and connect it to your PC. Dont use mass-storage option from MAGLDR. Launch Minitool Partition and create 1GB FAT32 Primary partiton followed by 1GB EXT3 with 4096 block size primary partition. This process is not as complicated as it may sound
4. Put the downloaded RAFDROID CWR zip file into the FAT32 partition. (When the partitioning is complete, windows will only see 1GB in your microSD. The 2nd 1GB EXT3 partition will only be available to android, so dont worry about it)
5.Once done, pop you microsd in your LEO, and choose Recovery option from menu. Once you enter the recovery menu, choose Install from ZIP file and choose the RAFDROID zip file that you have just put in.
6. Wait, and choose reboot. Whole process should be about 20 min.
7. Enjoy your android
Guys, please add anything if i missed out any steps

PeterSvendsen said:
I have done a task29 several times already.
---
.... or rather t mobile on top of ur screen
---
I'm not sure what you ask me about. But no on my phone my call buttons is black and gray
By using panasonic formatter I only format... but the card is on 8Gb so guess I need to make a partition.
Mini partition tool doesnt work correct it report errors as soon as I ftry to format etx3
Click to expand...
Click to collapse
ok if u have performed task 29
install stock rom having spl 2.08 or less
install hspl 2.08
install malgdr 1.13
install cwm depending on the rom u want to use (it must be mention in the thread which one to go for)
transfer the zip file from pc to mmc card by mounting the card orelse use card reader to transfer the files
go into malgdr option and install from zip
note:create 1024 ext3 or ext4 leaving the rest in fat format
http://forum.xda-developers.com/showthread.php?t=905089 (the best way to parttition)
or http://forum.xda-developers.com/showthread.php?t=910000
or http://forum.xda-developers.com/showthread.php?t=905145
or http://www.youtube.com/watch?v=9d7qhBpCJQc&feature=player_embedded
this is the best method to format your card in order of your requirement
do these steps of formating before instaling cwm or before doing any other steps
and 1 more thing u have a 512 leo euro hd 2 so read these guides here
http://forum.xda-developers.com/showthread.php?t=609477
u wil get all information for stock rom /correct radio and every stuff in the above thread
hope your probelem gets solved this time if u need any more help let me know
remeber if you have hspl 3.03 u cant install android so use stock rom with spl 2.08 and install hspl 2.08 later
i wouls suggest to use hyperdroid http://forum.xda-developers.com/showthread.php?t=918899 as its the best after MDJ built
great battery,speed,smooth,etc no errors but if you want to try froyo built than you are checking the right thread

[Q] Just a little help from my friends

Just got an HD2,coming from my Hermes.
It's like going from a 19" monitor to a 32" monitor
Not new to flashing as I've been doing it for years on my Hermes,radios and roms.
New to the HD2 obviously so I need to get some things clear before I proceed.
Flashed HSPL 2.08 already.
I believe I need this version so that I can run android and win7?
Flashed my 1st rom,an energy one.
All is well except I'm not really keen on win 6.5 anymore.
Although most of my cabs work which is great
I want to try win7 and android.
Android
3 versions?
nand=runs from the phone?
magldr=?
SD=runs from the SD card?
Win7
Not quite sure as I've not read that far yet
Is flashing win7 same as flashing a win6.5 or do I need to do something extra?
Dual boot is working with HD2 or not?
Gen.Y DualBOOT v1.0.6.0 says no in the initial post.....
"Just to clear up the most asked question in this thread, this app will NOT work with the HTC HD2, because there is no android distro available yet for that platform (SnapDragon)"
....but that was over a year ago.
Anything else I need to know?

Your right on it all, magldr you install from the tri colour screen, its where Android is installed from on the nand, then you will need clock work mod, this is basically Android recovery, you can create back ups of your roms and also install Android roms directly from SD,
Win 6.5 is the past
I've not really done much with win7 Android is the way forward,
Gingerbread is the latest version of Android.
Look for clk versions in the Android nand thread
Clk = clockwork
Probably get started with
http://forum.xda-developers.com/showthread.php?t=769026
I've been on Android for a while now, the last time I dual booted I ran Win 6.5 from nand then I loaded android from SD
I'm using miui its a total re write and everything is themeable but is get used to Android first
Anything else
Sent from my HTC HD2 using Tapatalk

Hd2 toolkit
http://forum.xda-developers.com/showthread.php?t=1090783
That will help, you will need to update your "leo_radio" aswell
Sent from my HTC HD2 using Tapatalk

Miui is here
http://forum.xda-developers.com/showthread.php?t=1117787
Sent from my HTC HD2 using Tapatalk

Thanks for all them
Not too sure how to 'flash' to an android?
or to load the cLK?
they come as disk image files (.img)

They come as .zip files.
Find the clk thread and learn how to install it, then you simply put the. Zip file on your SD and load clk then install Android from the zip
Sent from my HTC HD2 using Tapatalk

Ok
I'm going to use the Hd2 toolkit,this also cLK's my device.
Why does it need to partition my device and what's a good size?
I seem to have ran into some bother with fastboot command when doing cLK for dummies.
I'm getting.......
'fastboot' is not recognized as an internal or external command,
operable program or batch file.

It partitions some of your SD to ext4 to make more internal memory for apps
I was about to write you a walk-through but I've stole this instead follow it step by step
Sent from my HTC HD2 using Tapatalk

langthang;12431253]How to flash ROM:
HD2 NAND Toolkit - Toolkit for HD2 Users (From ksubedi)
Use MAGLDR
1. Your phone need HSPL 2.08.HSPL first
2. Flash DFT_LEO_MAGLDR113_DAF
Link download MAGLDR113
- Go to Bootloader
- Connect your phone to PC
- Run ROMUpdateUtility.exe and follow guide step by step
- Phone auto reboot and goto MAGLDR113 menu
- Done
3. Flash Recovery
Link download newest Recovery 3.0.2.4: thanks seadersn
http://www.mediafire.com/?f81pamq6fbjmtw5
- Goto MAGLDR113 menu
- Choose USB Flasher (use Volume down/Volume up button, then press Call button)
- Connect your phone to PC
- Run DAF.exe and follow guide step by step
- Phone auto reboot and go to MAGLDR113 menu
- Choose AD Recovery to go Recovery Menu
4. Wipe full data and Advance - Dalvik cache on Recovery Menu is recommand
- If you update from previous version, only need wipe cache/dalvik cache and all your data will saved
5. Flash ROM use Recovery
- Choose Install zip file from SD card
- Follow the guide
- Press Call button (Green button) to accept - Reject button (Red button) to Cancel
6. Reboot and see your result
Use cLK
Follow the guide in here:
http://forum.xda-developers.com/showthread.php?t=901305
Very easy way to prepare flash ROM use Tools here:
http://forum.xda-developers.com/showthread.php?t=1090783
How to enable Data2EXT in MIUI GINGER ROM (Thanks droidzone about these scripts):
Note: This feature require high speed SD card (Class 6 or higher) for best performance, the slower SD card work but the ROM is slow down
1.Partition your SD card
- Format SD card
- Create EXT Partition. There is the easy way to create EXT Partition by CWM Recovery:
+ Goto Recovery Menu
+ Cho Advanced -->Partition SD Card
+ Choose EXT size (Maximum is 2048Mb) and Swap size (Recommand is 128Mb)
+ Waiting until Done
2. Install Data2EXT feature:
- Install your ROM by CMW Recovery
- Install the A2SD Killer scripts file (attach file bellow)
- Reboot once after running the A2SD Killer and setup everything but don't install anything.
- Reboot to recovery once again and install the Data2SD Installer (attach file bellow)
- Reboot again and see result
ReInstall Data2EXT procedure:
http://forum.xda-developers.com/showpost.php?p=12999815&postcount=1744[/QUOTE]
Sent from my HTC HD2 using Tapatalk
Sent from my HTC HD2 using Tapatalk

Just can't seem to be able to install the recovery image.
Not getting past fastboot commands in windows
Going to try through android sdk...........

Have you installed windows drivers? And ran as admin?
Sent from my HTC HD2 using Tapatalk

whynot66 said:
Have you installed windows drivers? And ran as admin?
Sent from my HTC HD2 using Tapatalk
Click to expand...
Click to collapse
yes
placed the fastboot.exe and AdbWinApi.dll in the folder and it just sits there saying 'waiting for device'.

When you boot your hd2 into magldr then you scroll to "usb flasher" whilst usb is connected to pc? What happens, does windows recognise the device? Does it install drivers?
Sent from my HTC HD2 using Tapatalk

Download this http://www.mediafire.com/?f81pamq6fbjmtw5
Don't change anything in the folder just boot magldr click usb flasher connect usb and run daf.exe
Sent from my HTC HD2 using Tapatalk

whynot66 said:
When you boot your hd2 into magldr then you scroll to "usb flasher" whilst usb is connected to pc? What happens, does windows recognise the device? Does it install drivers?
Sent from my HTC HD2 using Tapatalk
Click to expand...
Click to collapse
Went down the cLK route.
whynot66 said:
Download this http://www.mediafire.com/?f81pamq6fbjmtw5
Don't change anything in the folder just boot magldr click usb flasher connect usb and run daf.exe
Sent from my HTC HD2 using Tapatalk
Click to expand...
Click to collapse
I'll try that,thanks.

Ok both went well but not sure how to flash a magldr?
One says enter usb flasher and then run daf.exe in the rom but I don't see that in the rom I downloaded....CM7-v2.1.0-MAGLDR-CWM.zip
phone is sat in the magldr boot screen?
tried putting the rom onto the sd card with usb mass storage which went ok.
fails to flash when using boot AD Sd
load zimage
sd kernal open failed
it's a zip file?
__________________________________
Ok found another post that explains things a bit better,let's see what happens.......

The daf thing is old, now almost 99% of the ROMs use ClockworkMod. When you're on MAGLDR screen, using the volume rockers, go to USB flasher and select it by pressing the call button. Run the Android Toolkit and choose MAGLDR repartion, and select 150mb partition size from the left panel then click "Repartition" . After it finishs, go to magldr and choose "Android Recovery" or something similar, it will get you in an orange texted screen (CWM) . put the file you downloaded on your sd card and choose flash zip file, then choose it and let it do its thing .

kawazaki said:
The daf thing is old, now almost 99% of the ROMs use ClockworkMod. When you're on MAGLDR screen, using the volume rockers, go to USB flasher and select it by pressing the call button. Run the Android Toolkit and choose MAGLDR repartion, and select 150mb partition size from the left panel then click "Repartition" . After it finishs, go to magldr and choose "Android Recovery" or something similar, it will get you in an orange texted screen (CWM) . put the file you downloaded on your sd card and choose flash zip file, then choose it and let it do its thing .
Click to expand...
Click to collapse
Thanks for that
I'd just found that out.
Running Android now.

Thank guys I'm a flashaholic now
How do I get my music etc onto my SD card without booting into magldr?

Just plug the wire in whilst I'm android, you'll get a notification slide the top down and mount it
Sent from my HTC HD2 using Tapatalk

after working sevral days i need help

hello guys i had NexusHD2-Gingerbread_V3.2a_NAND_(Android-2.3.7) on my htc hd2 then i wanted to use this rom
so after installing MAGLDR113 and CWR 5.0.2.6 i rebooted and created partition then i pressed mount and storage and pressed mount usb storage copied the the file name "NexusHD2-Gingerbread_V3.2a_NAND_(Android-2.3.7).zip" onto sd card and when i pressed choose zip from sd card and tried to install this it gave me error
"finding package, opening package, cant open /sdcard/"romname", installation aborted"
so i seaarched and i rename to update.zip still got the same error ,if i change it to "update" only it does not show up.
so somwhere i read to extract thee files and place in sdcard root and choos boot from ad sd , so i did that ,it loaded htc hd2 image on bottom it says NDT series by langthang" and it is stuck there not moving forward...i know i am doing something wrong i searched alot i tried to get back on "NexusHD2-Gingerbread_V3.2a_NAND_(Android-2.3.7)" it also gives the same error saying cant open bla bla i downloaded winmo went into bootloader tried to install winmo but it gets stuck on 0% please help i read tons of posts i searched alot after doing everything i came to get help from you
edit:i tried to restore and it says md5 mismatch
thanx

If you mounted sd card in CWM do not press back button!
Sd is still mounted...so press call button or restart your phone, boot into CWM and try again to flash your rom.

Khan_ said:
hello guys i had NexusHD2-Gingerbread_V3.2a_NAND_(Android-2.3.7) on my htc hd2 then i wanted to use this rom
so after installing MAGLDR113 and CWR 5.0.2.6 i rebooted and created partition then i pressed mount and storage and pressed mount usb storage copied the the file name "NexusHD2-Gingerbread_V3.2a_NAND_(Android-2.3.7).zip" onto sd card and when i pressed choose zip from sd card and tried to install this it gave me error
"finding package, opening package, cant open /sdcard/"romname", installation aborted"
Click to expand...
Click to collapse
corrupted download? interrupted transfer? always try copying across / downloading it again before you do anything else.
so i seaarched and i rename to update.zip still got the same error ,if i change it to "update" only it does not show up.
so somwhere i read to extract thee files and place in sdcard root and choos boot from ad sd , so i did that ,it loaded htc hd2 image on bottom it says NDT series by langthang" and it is stuck there not moving forward...
Click to expand...
Click to collapse
its a nand build so not sure it would cope with simply unpacking onto the sd card, i 'think' (i dont know, no clue about teh technicals) you have to alter something in teh init, but thats why i expect it isnt loading.
i know i am doing something wrong i searched alot i tried to get back on "NexusHD2-Gingerbread_V3.2a_NAND_(Android-2.3.7)" it also gives the same error saying cant open bla bla i downloaded winmo
Click to expand...
Click to collapse
which one? full filename please, also the version hd2 (regular, tmous) and its source, bought unlocked? branded from a provider? details are king when troubleshooting
went into bootloader tried to install winmo but it gets stuck on 0% please help i read tons of posts i searched alot after doing everything i came to get help from you
Click to expand...
Click to collapse
stuck at 0% usually points to the wrong rom for your phone, and/or no hspl installed. look in bootloader, whats teh spl line say?
edit:i tried to restore and it says md5 mismatch
Click to expand...
Click to collapse
theres a few threads about fixing md5 sums, read them yet?
thanx
Click to expand...
Click to collapse
i would suspect a dodgy sd card, but thats only a first general guess based on little information.

icke said:
If you mounted sd card in CWM do not press back button!
Sd is still mounted...so press call button or restart your phone, boot into CWM and try again to flash your rom.
Click to expand...
Click to collapse
did that no luck
samsamuel said:
corrupted download? interrupted transfer? always try copying across / downloading it again before you do anything else.its a nand build so not sure it would cope with simply unpacking onto the sd card, i 'think' (i dont know, no clue about teh technicals) you have to alter something in teh init, but thats why i expect it isnt loading.which one? full filename please, also the version hd2 (regular, tmous) and its source, bought unlocked? branded from a provider? details are king when troubleshootingstuck at 0% usually points to the wrong rom for your phone, and/or no hspl installed. look in bootloader, whats teh spl line say?
theres a few threads about fixing md5 sums, read them yet?
i would suspect a dodgy sd card, but thats only a first general guess based on little information.
Click to expand...
Click to collapse
ya as i said i did alot of search with no luck .
so finally i just installed
Code:
XXX.jayceooi.com/2011/01/14/how-to-install-windows-phone-7-on-htc-hd2-video/
but srsly i dont like but atleast it ws very simple to install,is there any way to install nand android just like this cuz i didnt find any
again thanx for replies guys

let me know if you still want to install nand android...i can guide you..and possibly fight with you till u install it successfully

I have written a guide that makes it super easy to install. If you still have problems just post in my thread or pm me
Sent from my HD2 using xda premium

It looks like a bad download.
But at first, check if your HSPL has version 2.08, and flash it, if it is other version.
Then check Radio version (2.15.50.14) and flash it, if it is other verion.
Do task29 and install afterwards magldr and recovery with right size for your rom.
Partiion you SD-Card like it should and wipe all you find (partition will delete all your data on sd-card).
Copy downloadet zip to sd card and install it.
These are only basic steps. More details you find here:
http://forum.xda-developers.com/showthread.php?t=905841
Have fun

gdsbalaji said:
let me know if you still want to install nand android...i can guide you..and possibly fight with you till u install it successfully
Click to expand...
Click to collapse
i really appreciate that bro ...yeah i really want android back on my hd2
kylew1212 said:
I have written a guide that makes it super easy to install. If you still have problems just post in my thread or pm me
Sent from my HD2 using xda premium
Click to expand...
Click to collapse
i ll look into it definitely.
Taco123 said:
It looks like a bad download.
But at first, check if your HSPL has version 2.08, and flash it, if it is other version.
Then check Radio version (2.15.50.14) and flash it, if it is other verion.
Do task29 and install afterwards magldr and recovery with right size for your rom.
Partiion you SD-Card like it should and wipe all you find (partition will delete all your data on sd-card).
Copy downloadet zip to sd card and install it.
These are only basic steps. More details you find here:
http://forum.xda-developers.com/showthread.php?t=905841
Have fun
Click to expand...
Click to collapse
HSPL version is 2.08 i dont know about that radio version but i tried installing radio from provided in "easyandroid by kevin" and it also got stuck on 0%.did task 29 installed magdlr 1.13 and CWR 3.2.0.0 (also tried the latest version of CWR 5.0.2.8 i think) formated sd card did a partition as well mounted usb storage from ad recovery rebooted it the again went to ad recovery and pressed choose from sd card it goves me that error "installation aborted.
just a quick question i have these roms on my computer
http://forum.xda-developers.com/showthread.php?t=905060
http://forum.xda-developers.com/showthread.php?t=1013852
what should be the neccesary steps to install these i read the both developers guides but there is something that i am missing...
i hv DFT windows 7 installed on my hd2 so what should i do to get android back.
what is Clk i did not installed that in my view was clk is same thing like magdlr so i skipped installing that n i had (hspl 2.08,magdlr 1.13 and cwr 3.2.0.0) only
is this the problem causing?
regards

here are steps for ya
files you need: (if you need pm me)
-task29
-Radio Leo 2.15.50.14
-DFT_LEO_MAGLDR113_DAF
-Recovery_150M_system_5M_cache
-rom zip (dont alter/extract zip if you done know wat to do with this)
do these: (from your current WP7 rom)
-restart device
-get into tricolor bootloader
-plug usb...hd2 should say 'USB'
-do a task 29
-get into bootloader again
-plug usb...hd2 should say 'USB'
-install radio by running 'CustomRUU.exe'
-get into tricolor bootloader
-plug usb...hd2 should say 'USB'
-run DAF.exe for installing MAGLDR
-reboot
-get into MAGLDR by holing power/end key while booting
-go to 'usb flasher' in the menu and press green/call button
-plug usb...hd2 should say 'USB'
-wait till it say 'wait usb...usb'
-get into your recovery folder
-run daf.exe
-reboot post completion
-get into MAGLDR by holing power/end key while booting
-get into ad-recovery
-get into mount storage
-activate usb mass storage
-now put the rom zip files into sd card
-press power to get back to recovery menu
-select install rom from sdcard
-choose rom file
-select install
this should typically install nandroid into your hd2...
if you face any issues, share the step and the error scenario/msg

gdsbalaji said:
here are steps for ya
files you need: (if you need pm me)
-task29
-Radio Leo 2.15.50.14
-DFT_LEO_MAGLDR113_DAF
-Recovery_150M_system_5M_cache
-rom zip (dont alter/extract zip if you done know wat to do with this)
do these: (from your current WP7 rom)
-restart device
-get into tricolor bootloader
-plug usb...hd2 should say 'USB'
-do a task 29
-get into bootloader again
-plug usb...hd2 should say 'USB'
-install radio by running 'CustomRUU.exe'
-get into tricolor bootloader
-plug usb...hd2 should say 'USB'
-run DAF.exe for installing MAGLDR
-reboot
-get into MAGLDR by holing power/end key while booting
-go to 'usb flasher' in the menu and press green/call button
-plug usb...hd2 should say 'USB'
-wait till it say 'wait usb...usb'
-get into your recovery folder
-run daf.exe
-reboot post completion
-get into MAGLDR by holing power/end key while booting
-get into ad-recovery
-get into mount storage
-activate usb mass storage
-now put the rom zip files into sd card
-press power to get back to recovery menu
-select install rom from sdcard
-choose rom file
-select install
this should typically install nandroid into your hd2...
if you face any issues, share the step and the error scenario/msg
Click to expand...
Click to collapse
i used to get stuck on 0% while installing radio...i am at office so i downloaded these files again(image attatched) .i will try to install when i get back to home with your instruction given and will post what ever result i get.

Khan_ said:
i used to get stuck on 0% while installing radio...i am at office so i downloaded these files(image attatched) .i will try to install when i get back to home with your instruction given and will post what ever result i get.
Click to expand...
Click to collapse
good luck.

gdsbalaji said:
good luck.
Click to expand...
Click to collapse
everything worked smooth untill the final test
i mounted usb storage copied HD2_NDT_GINGER_2.3.7_CM7.2_BASED_V35.0_MAGLDR clicked power button selected install zip from sd card then selected choose zip from sd card selected HD2_NDT_GINGER_2.3.7_CM7.2_BASED_V35.0_MAGLDR and selected Yes .
it says
installing :/sdcard/HD2_NDT_GINGER_2.3.7_CM7.2_BASED_V35.0_MAGLDR
Finding update package
Opening Update Package
E:cant open /sdcard.HD2_NDT_GINGER_2.3.7_CM7.2_BASED_V35.0_MAGLDR
(bad)
installation aborted
same old issue what i was getting.
edit:it was the sd card ...i changed the sd card copied rom and installed it smoothly thanks a ton bud i really appreciate the help u gave .God bless ya

Glad it worked dude...hv fun
Sent from my HTC HD2 using XDA App

[Q] Flash android FROM sd card

Hello.
I have an HD2 with windows Mo and a broken usb port. Is there any way to flash android FROM sd card like cooked winmo roms?

If you already have HSPL, you can. Flash a recent version of cLK (which comes with recovery built in to the nbh package) using the SD Card - Vol key method. This will remove WinMo from your phone. After that change the partition sizes in cLK, boot to recovery and flash your fav Android ROM from SD Card.

ph03n!x said:
If you already have HSPL, you can. Flash a recent version of cLK (which comes with recovery built in to the nbh package) using the SD Card - Vol key method. This will remove WinMo from your phone. After that change the partition sizes in cLK, boot to recovery and flash your fav Android ROM from SD Card.
Click to expand...
Click to collapse
is there any guide or a step - by step post how to do this?

Here, this guide is great (thanks to kylew1212, if you see him hit the thanks button)

Nikos! said:
is there any guide or a step - by step post how to do this?
Click to expand...
Click to collapse
If you speak german, you can find a great help there:
http://www.pocketpc.ch/htc-hd2-android/120754-mega-howto-sdb-nand-cwm-schritt-fuer-schritt-android-hd2-installieren.html