Database Users

Radio Stack Upgrading Failed

I've upgraded my wallaby radio stack from 4.16 to 4.21 and it was failed. Now , I can't use the phone function. What should I do ? please help....

Stay at this topic:
http://forum.xda-developers.com/viewtopic.php?p=111577
or do a search after GSM Error....
Stefan

the lonk you've given asked me for username and password. And it didn't accept my xda-developers' username and password.

irsan_donald said:
the lonk you've given asked me for username and password. And it didn't accept my xda-developers' username and password.
Click to expand...
Click to collapse
But it should be your normal acoount data.... :?:
Here it comes in plain text:
How to fix GSM Error Problem ....
1. Download the XDA-Developers ROM Version 1.1
2. Install the ROM on your Device via SD-Card and bootloader.
3. The phone should start up and give you the screen allignment and the whole menu!
4.
Download an Upgrade for your device. This depends ont the model you are using. Check the sticker at the back of your device.
* If it is a PW10A-Model download RSU Version 4.16
* If it is a PW10B-Model download RSU Version 6.24.20
5. Extract the downloaded ZIP-File and copy all files to the /Windows directory of your device.
6. Copy the RSUpgrade.exe additional to the /windows/startup directory.
7. Make an soft reset of your device.
8. Maybe the upgrade will stop again at 1%, this may occur when you have an empty battery.
9. Place your device in the cradle. Run Active Sync on your device.
10. The RSU Upgrade will run in the background.
11. Wait for about 10 Minutes. The upgrade should complete in the background....
Afterwards all should work again...
Good luck....

the dialog box ask me for :
1.user id on remote host :
2.password on remote host :
3.account on remote host :
I need the 4.16 version. Can I use it in Indonesia ??

I turn on my device , and it is white blank.
I get in to the boot loader, then this message appeared :
"WALLABY
Boot Loader
v5.15
GSM ERROR"
I pressed the ACTION key, then this message appeared :
"GSM turn ON
Please Wait
f a i l !!"
What should I do ??

Error 262 when trying a Radio or ROM upgrade

I've tried searching, but I can't find anything of use. Could someone please tell me how to remedy this?

In the end I had to uninstall ActiveSync and reinstall it. I also had to hard-reset my TyTn, but everything worked out in the end after about four hours of mayhem.

It sounds like ActiveSync went on holiday. I think there was a post somewhere regarding this that was along the tune of unplugging the phone from the USB, switch ports and/or computers, rebooting the computer (and while you do this, take the battery out of the phone), login back into the computer, put the battery back into the phone, restart ActiveSync. Also, make sure the power is stable. I'd use a laptop so in case the power goes up, the computer would stay on (and a lot of people had issues with Vista (*snicker*)). Something along these lines but I would try to get more verification of that.
Were you trying to upgrade the RADIO or just the OS ROM?
Personally, I'd recommend using mtty to install the OS.
If it is the latter, I'd follow the wiki and do the mtty route (faster and virtually no choice to brick your phone).

trapper said:
I've tried searching, but I can't find anything of use. Could someone please tell me how to remedy this?
Click to expand...
Click to collapse
hi i have exact the sameproblem, how have u fix it?
whats the problem 262 exactly?
have u a link, i dont know how to insall with mtty
i try evrithing but i cant flasha new rom
O2 XDA trion Super-CID
ROM: Original O2 Rom -> XDALive 0.10 -> XALive German (now with error 262)
ROM-Datum: 07/26/06 -> 01/04/07
ROM-Version: 1.25.207.2 GER -> 3.22.110.1
Radio-Version: 1.16.00.00 -> 1.16.00.00
Trion Version: HT648 Herm100
IPL: 1.00
SPL: 1.04

RUU error codes
For what it's worth ... the following is from a README.doc in a Dopod ROM:
-> ERROR [202, 204] : CONNECTION
This error message will appear when the device is not connected to ActiveSync correctly. Make sure you properly connect the device to the PC through ActiveSync before running RUU.
-> ERROR [206] : MEMORY ALLOCATION
-> ERROR [280] : UPDATE ERROR
When you see any of these error messages, close other running programs on the computer and run RUU again.
-> ERROR [208] : FILE OPEN
-> ERROR [210] : FILE READ
These error messages indicate that RUU lacks certain important files and cannot continue with the update. Please get the complete RUU package again.
-> ERROR [212] : FILE CREATE
-> ERROR [214] : FILE WRITE
-> ERROR [222, 224] : DEVICE NOT RESPONDING
These error messages will appear when remote access control has failed. Check the ActiveSync connection and try running RUU again.
-> ERROR [220] : MAIN BATTERY POWER
This error message will appear when the device’s battery power is not sufficient. Although RUU will instruct you to plug in the AC adapter, it still has to make sure that your device has enough power to upgrade the radio. (Even when you plug in the AC adapter, the device is unable to charge the battery when it is upgrading the radio).
-> ERROR [238] : FILE READ
This error message may appear when, for some unknown reason, the ROM image on the phone is corrupt. Download the whole RUU and try again.
-> ERROR [240] : FILE OPEN
When this error message appears, check whether the downloaded image is placed in the directory of RUU. If, for some unknown reason, you find that the ROM image is not located in the RUU folder, you have to download the RUU and retry again.
-> ERROR [242] : INVALID LANGUAGE
-> ERROR [244] : INVALID MODEL ID
-> ERROR [294] : INVALID VENDER ID
-> ERROR [296] : UPGRADE ONLY
One of these error messages will appear when you use the wrong RUU to do the upgrade. RUU will check if the Model ID and Language ID are compatible with the device. Make sure you use the appropriate RUU tool to upgrade.
-> ERROR [246] : DEVICE NOT RESPONDING
This error message indicates that RUU cannot start the update process. Please contact your service provider for assistance.
-> ERROR [248~260] : UPDATE ERROR
This error occurs when there is an “open port error” before upgrading the CE ROM image.
Solution: You can reset the device and run RUU again. If you still encounter an “OPEN PORT ERROR” again, reset your computer and try again.
-> ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process.
Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue.
Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode.
-> ERROR [264, 274] : CONNECTION
-> ERROR [302~318] : UPDATE ERROR
-> ERROR [320~328] : INVALID COMMAND
These errors seldom occur. However, if one of these errors occur, it could not be recovered and the device had to be sent back to the customer service center. In this case, you have to flash a new ROM code.
-> ERROR [300] : INVALID UPDATE TOOL
This error message will appear when you use the incorrect RUU version to upgrade.
-> ERROR [330] : ROM IMAGE ERROR
This error message will appear when you use the incorrect RUU to upgrade and the image file size is larger than the Flash ROM size. In this case, download the correct RUU version to upgrade.

thx but
-> ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process.
Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue.
Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode.
i have soft-reset my device, The update process does'nt continue
i have hard-reset my device, The update process does'nt continue
i try original rom The update process does'nt continue

Try uninstalling and reinstalling ActiveSync. Fixed mine a treat.

Hi,
I get the same issue - no connection through activesync at all. I have tried 4.2, 4.5 and I have even tried to get a connection using mtty but it doesnt offer usb as a connection.
I have even tried putting the update file (using the proper procedure) on an SD card and booting up the device.
I simply cant get XDA live 0.10 to connect with USB to my PC. Tried reboots, reinstalls, soft and hard resets... everything.
Is this a matter of repeating the uninstall/reinstall of activesync or is it better to keep soft resetting the device???
I am lost.
Tar

Sorted it....
Uninstalled Activesync, rebooted and took the battery out of the device for 15 mins.
Then reconnected the battery. Then (without any Activesync installed) I plugged the device into my pc via USB. It picked up the device and installed some drivers in the background.
To check to see if I had a connection I ran mtty which gave me the ////usb connection as an option - thus confirming the device was being recognised.
I then reinstalled Activesync 4.5 and rebooted the PC to find that I could now connect with the hermes.
THANK GOD !!! I have more grey hair however...

I am trying to update my Hermes' rom but i am getting this error no matter what computer I use, what activesync, vista, XP doesnt help.
Is it necessary that I hard reset the device?
Please help me get through this ERROR 262! I've been reading alot of posts and no luck!!
THANKS!!

PPC-Warrior said:
I am trying to update my Hermes' rom but i am getting this error no matter what computer I use, what activesync, vista, XP doesnt help
Click to expand...
Click to collapse
A little more information about what exactly you are trying to do to upgrade your ROM goes a long way. Which ROM are you trying to install? How? To which device? etc...
Is it necessary that I hard reset the device?
Click to expand...
Click to collapse
No, it is not necessary (EDIT: But the upgrading will "hard reset" your device. Everything will be lost)
Please help me get through this ERROR 262! I've been reading alot of posts and no luck!!
Click to expand...
Click to collapse
Error 262 usually means that the connection between the update program and the device has been lost. I've seen this happening when for some reason the installation of the device drivers after the SSPL loads takes too long. Try rebooting the computer, make sure that no other programs are running, ensure that you get a good activesync connection (green) and then try again. See if it works.
Your computer has Windows XP right?

mfabre said:
A little more information about what exactly you are trying to do to upgrade your ROM goes a long way. Which ROM are you trying to install? How? To which device? etc...
No, it is not necessary (EDIT: But the upgrading will "hard reset" your device. Everything will be lost)
Error 262 usually means that the connection between the update program and the device has been lost. I've seen this happening when for some reason the installation of the device drivers after the SSPL loads takes too long. Try rebooting the computer, make sure that no other programs are running, ensure that you get a good activesync connection (green) and then try again. See if it works.
Your computer has Windows XP right?
Click to expand...
Click to collapse
A quick search suggests that if the pc is fine then the device is bricked (possibly a 2c brick).

I couldn't update the device to LVSW or even SPL V6 with the USB connection Alone.
I've resolved this problem by running the exe from SSPL-HERM.zip downloaded from this forum which put me into bootloader. Then I connect to USB and updated the device with LVSW Successfully! I am not entirely sure why but I'm relieved. Thanks all!

PPC-Warrior said:
I am not entirely sure why but I'm relieved. Thanks all!
Click to expand...
Click to collapse
Glad you solved it... I still believe that you had a problem with USB drivers timing out in the switchover from activesync to the RUU. Enjoy the new ROM!!!

I have the same problem
look:
RUUWrapper.exe that i try always in the end Fail with Error 262
i dont know what to do
With all thease i have made on phone i have it right now in this state
ROM version :02.10.GR
ROM date :04/17/07
Radio version :NONE
Protocol version:NONE
Can someone tell me how i can <<install>> radio and protocol varsion?
Is there any other way than RUUWrapper to flash it?(Whit this tool it always stay on 0% and fails)I have also try HTC Hermes SIM & CID Unlock - v3a whit no luck....
i have also try with the SD card but i always cant start flashing 0% and stay there...
with mtty.exe and info 7 and info 8 i have this:
Cmd>info 7
HTC Integrated Re-Flash Utility, Common Base Version : 1.51d
Device Name: HERM100, Bootloader Version : 2.10.Olipro
Built at: Apr 22 2007 13:32:26
Copyright (c) 1998-2007 Modified By Olipro - Hard-SPL
CPU ID=0x41129200
Main CPLD version=0x5
Upper CPLD version=0x4
Main Board version=0x5
Cmd>info 8
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is BAD block !!!
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block
Partition[0], type=0x20, start=0x2, total=0x18FE
Partition[1], type=0x23, start=0x1900, total=0x1800
Partition[2], type=0x25, start=0x3100, total=0x18400
Partition[3], type=0x4, start=0x1B500, total=0x1F300
CE Total Length(with sector info) = 0x377A800
CE CheckSum Length(without sector info) = 0x36A0000
Can this fixed [Block 0x6(6) is BAD block !!!]
I have also try:
Cmd>task 32
Level = 0
and when i prees Cmd>task 2a nothing happens.......
All the test that i have done fails when it go to flash the gsm rom....
what is the problem?the mobile rom is corrupt?

I had this same problem... Changing the usb -port in my pc seemed o take care of the whole issue for me. Yes and im running XP.

I'm facing the same Radio issue... CRC check gives Error... And I'm unable to upgrade it to anything, it stop on 0% then gives 262 error... Tried to dlash the original rom and it stop on 13%...
Also, I tried on another PC with the same results, uninstall, reinstall ActiveSync did nothing...
So, please help help help...

PPC-Warrior said:
I am trying to update my Hermes' rom but i am getting this error no matter what computer I use, what activesync, vista, XP doesnt help.
Is it necessary that I hard reset the device?
Please help me get through this ERROR 262! I've been reading alot of posts and no luck!!
THANKS!!
Click to expand...
Click to collapse
Reinstalling Activesync seems to have done it for me. Didn't change USB port. I also uninstalled a bunch of Apple products (iTunes, iPod reset, Bonjour, Apple Update Utility) without restarting the PC.

Fixed it:
Solution here:
http://forum.xda-developers.com/showthread.php?t=529628

error [262]
I might be stating the obvious but for newbies like me here if you do not follow the process and do not start by installing and running RaphaelHardSPL-Unsigned_190_1_3.exe first you will also get error [262]. It might be obvious to most of everybody around here but I can see how somebody new might get confused and skip this important first step! Good luck to all!

[Q] HP 6965 chinese to english. HELP ME please!

Hey all I'm fairly new here and I just got a iPaq 6965 shipped to me from Taiwan, unfortunately it is all in chinese and I can't read it so I need it in english.
Someone please tell me how i can change the language as I can't read anything or function my phone. I already searched and I'm confused by the whole 'rom' ordeal and I saw a thread stating that downloading these roms could harm your phone so I'm not sure what to do. Please help me!
thanks!

If your Flash chip type is G4, you can use ENG V1.21UK rom to update, I have uploaded the rom to Yahoo.com mail box.
I have changed my 6965 CHT ver to ENG ver successfully.
You can login yahoo mail box by using [email protected] as id and 69656965 as password.
Pls note not to delete the rom as others might need it too.
Flsah method:
1. Sync your mobil with PC by ActiveSync4.5 or up
2. Double click the downloaded update rom programme.
3. Click upgrade button and wait for 8-10 minutes
4. Done.

3circles said:
If your Flash chip type is G4, you can use ENG V1.21UK rom to update, I have uploaded the rom to Yahoo.com mail box.
I have changed my 6965 CHT ver to ENG ver successfully.
You can login yahoo mail box by using [email protected] as id and 69656965 as password.
Pls note not to delete the rom as others might need it too.
Flsah method:
1. Sync your mobil with PC by ActiveSync4.5 or up
2. Double click the downloaded update rom programme.
3. Click upgrade button and wait for 8-10 minutes
4. Done.
Click to expand...
Click to collapse
Report from Nod32:
6.9.2008 г. 13:50 ч. HTTP filter file
_ttp://us.mg2.mail.yahoo.com/dc/CG_Cookie.swf
SWF/Exploit.CVE-2007-0071 trojan connection terminated - quarantined
Threat was detected upon access to web by the application: C:\Program Files\Internet Explorer\iexplore.exe.

False alert I think, http://us.mg2.mail.yahoo.com/dc/CG_Cookie.swf is from yahoo site, impossible a threat! For sure your C:\Program Files\Internet Explorer\iexplore.exe will access to web while surfing on internet!

thanks!I got it!

NOR to EN
Working fine!!!
SUPER

Hi I tried to install the rom update. It errors out saying Client_GetOSVer fail !! Error: 501 and my phone is stuck the screen shows vG39. What do I do?? Thanks for the help

super_mario12345 said:
Hi I tried to install the rom update. It errors out saying Client_GetOSVer fail !! Error: 501 and my phone is stuck the screen shows vG39. What do I do?? Thanks for the help
Click to expand...
Click to collapse
1: hold down the 2 function buttons on either side of the joystick (NOT the call answer and call kill buttons, between them )
2: while holding the buttons down, use the pen and press the reset button at the bottom of the phone.
You should now have a bootloader screen, with an HP logo, and SERIAL or USB line of text at the top, and a G.39 version text at the bottom of the screen....
Activsync need not be connected at this stage, just your USB cradle or cable....
3: Download and extract the _Sable___G3_DEVICE_ONLY_hw6915-1.21uk.rar file from above... remember to delete the files from folder - CEBL.nbf, RadioFS.nbf, RadioOS.nbf..
4: run the sableRUU.exe ... this will now install the CE OS in english....
See: http://forum.xda-developers.com/showthread.php?t=429358
it will work.

Client_GetOSVer fail !! Error: 501
Hi I tried delete the files from folder - CEBL.nbf, RadioFS.nbf, RadioOS.nbf.
The folder have this file.:
1). EnterBL Application
2). GetDevic Application
3). CEOS.nbf
4). Sable_RUU, when I run Sable_RUU get this errors out saying Client_GetOSVer fail !! Error: 501 and my phone is stuck the screen shows USB HP Logo and vG39
And I cant hard reset, the small reset bottom are broken
How do I get it back??
Thx and cheers..

Freezing
sorry for wrong post

3circles said:
If your Flash chip type is G4, you can use ENG V1.21UK rom to update, I have uploaded the rom to Yahoo.com mail box.
I have changed my 6965 CHT ver to ENG ver successfully.
You can login yahoo mail box by using [email protected] as id and 69656965 as password.
Pls note not to delete the rom as others might need it too.
Flsah method:
1. Sync your mobil with PC by ActiveSync4.5 or up
2. Double click the downloaded update rom programme.
3. Click upgrade button and wait for 8-10 minutes
4. Done.
Click to expand...
Click to collapse
MMANYYYYYYYYYYYYYYYYY THNAKSSSS 3circles u are the mannn

after this update will the phone be fully functional ? Including GSM ? On some other thread it said to remove some files from the update before flashing.

[Q] Dell Venue Pro; Update failed, recover not successfull

Hello there,
my "new" Venue Pro arrived yesterday and i just started to test it.
It had a very old firmware, not even mango ... so i startet updates by zune.
After the third update (for wlan problems, i think it was the "latest" wp7 update) i get an error .... so i restartet the phone an tried again, no success.
I read a lot, not even the microsot update tool could help. So i startet the recover in zune over settings, updates.
The update startet and now i always get an error by 61%. I read a lot again, i even tried to backup it from another comuter (copied image %appdata%\Microsoft\Microsoft Phone Update) but the same problem.
So, my "new" phone doesent start any more ... it just loads to the bootloader ...
I tried to get any offiziel firmware to flash the device to "standard" but i seams hat MS dont want this.
I knew a little bit about flashing WM6 devices (HSPL & custom fw) but with WP7 devices i dont really understand what to do in this situation.
I hope you can help me! Can i download the dell firmeware someware to recover the phone? maybe someone have a "personal recover firmware" for me?
Thx

If your device can load into download mode (that you called "bootloader") it can be restored to 7004 T-mobile branded version and later update to 7720 via Zune. This is only one available firmware on the public.
Look at this thread: http://forum.xda-developers.com/showthread.php?t=1411300

THX!
I will try ... downloading ...

So, i downloaded VenuePro_flash_GLEOS2A_US_TMO_SIGNED_SWV0105_LP0030_RV001_RETAIL.ffu and thought, everthing is getting fine.
But i had no idea how i can install this!
I´m reading hours and hours, tried to use UpdateWP.exe (crash on 2 computers, where NO MS Support tools are installed), Windows_Phone_7_Backupv1.9, MangoB2-ZuneClient, Zune 4.7 .... no success.
Could sombody please tell me, how i can install this on Windows 7 x64? I dont know what to do ...

I get this message when i try to updatewp it;
Unhandled Exception: System.TypeInitializationException: The type initializer fo
r 'wm7update.Program' threw an exception. ---> System.IO.FileLoadException: Coul
d not load file or assembly 'Microsoft.WindowsMobile.DeviceUpdate, Version=7.0.0
.0, Culture=neutral, PublicKeyToken=ddd0da4d3e678217' or one of its dependencies
. The located assembly's manifest definition does not match the assembly referen
ce. (Exception from HRESULT: 0x80131040)
File name: 'Microsoft.WindowsMobile.DeviceUpdate, Version=7.0.0.0, Culture=neutr
al, PublicKeyToken=ddd0da4d3e678217'
at wm7update.Program..cctor()
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\M
icrosoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure lo
gging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fus
ion!EnableLog].
--- End of inner exception stack trace ---
at wm7update.Program.Main(String[] args)
See also here: http://forums.create.msdn.com/forums/p/85864/516966.aspx
As i said before, there is no (more) Microsoft Update Software on my computer and on the second there never was it.
Mybe i could handle it with the "MangoB2 Updater" .... but i cant download this anywhere.
I really have no luck :-(

Do not panic yet. You have different versionsof zune or updatewp /missing files
Deinstall everything related to zune.DONT TOUCH EVERYTHING RELATED TO MS SUPPORT TOOLS, IF ITS INSTALLED IT DOESNT INFLUE ON PROCESS!!!
Install Net framework 3.5, 4;
Install Zune(take it from zune.net);
Install wp7 updatetool from zip attached here here http://forum.xda-developers.com/showthread.php?t=1306415 with proper x64 file.
Follow those steps after connecting device in download mode:
Extract command prompt to C:\program files\zune\
go to directory to “C:\program files\zune\ and run Command prompt. Type in : “UpdateWp /list” and your phone should show up there.
If your phone is listed (it should be) and your download is done and extracted, copy the VenuePro_flash_GLEOS2A_US_TMO_SIGNED_SWV0105_LP003 0_RV001_RETAIL.ffu file over to the” C:\program files\zune\” directory.
Type in: “updatewp /ffu VenuePro_flash_GLEOS2A_US_TMO_SIGNED_SWV0105_LP003 0_RV001_RETAIL.ffu” enter, update should start.

YES IT WORKS!
Great, now i can start my dell venue pro again and even updating is functional.
But why can´t i change the display language? I tought i´m able to change the display language in this roms? In all WP7 phones (in germany) i could change the language at the first start (and after a reset).
*argh!*
On this site i found language packs, but that is a little bit ... argh?!
http://forum.xda-developers.com/showthread.php?t=1306415

so it´s over ... i send the phone back ...
Thank u very much 4 helping.

Dell Venue Pro..I think I have a demo model

I got a Venue Pro yesterday. I purchased it on eBay. Hooked it up to perform updates and I couldn't. I constantly get error code 80070002
I have tried it now on two PCs on two different networks, one running Win 7 and the other running Win 8. I have looked on the net but can't really find anything helpful.
Anyway, never having had the phone before I found it odd that it came with a call and message history. Even after I reset the phone it still has a history, pictures of people from Facebook with pictures that are obviously professional shots. All messages are from people each other how great their new Windows phone is.
Also, if I don't use the phone for a couple of minutes it starts a phone demo video/slide show. I am now thinking I have a demo OS even though I can make calls and surf the net. Current OS is 7.0.7004.0
What can I do to totally wipe this phone and start from blank?
Thanks

You'll probably have to follow the instructions in "How to unbrick a Dell Venue Pro." No way to change a demo ROM into a retail ROM. You need to flash the retail ROM and start over.

If you still have the original rom installed on it, could you:
run the emapp tool and write down the contents of what it has?
As far as dell is concerned, I dont believe they normally make demo specific roms.
But that is in reference to their android devices and MS might have had them make an exception for the VP (and it's WP7)

TheManii has a thread over here where he's collecting this data.
Dial ##634# to enter the hidden Engineering Mobile menu.
http://forum.xda-developers.com/showthread.php?t=1479233

Thanks to all who replied. I got it fixed. It was indeed some weird demo ROM or setting but its all cleared up now. I used the unbricking thread listed here
http://forum.xda-developers.com/showthread.php?t=1411300
and downloaded the ROM from here
https://skydrive.live.com/?cid=4da87ed18e0bf92d&resid=4DA87ED18E0BF92D!7216&id=4DA87ED18E0BF92D!7216
I got the UpdateWP too from here
http://forum.xda-developers.com/showthread.php?t=1262471
Only thing to note is to extract the UpdateWP folder and put both files in to the Zune directory on your PC.
After that everything went relatively smoothly. It took 2 or 3 tries to get the Retail ROM to take and from there the phone updated perfectly until Mango. It failed but I just disconnected USB and reconnected and it ran the update.
Thanks again

Same boat
edderspcs said:
Thanks to all who replied. I got it fixed. It was indeed some weird demo ROM or setting but its all cleared up now. I used the unbricking thread listed here
http://forum.xda-developers.com/showthread.php?t=1411300
and downloaded the ROM from here
https://skydrive.live.com/?cid=4da87ed18e0bf92d&resid=4DA87ED18E0BF92D!7216&id=4DA87ED18E0BF92D!7216
I got the UpdateWP too from here
http://forum.xda-developers.com/showthread.php?t=1262471
Only thing to note is to extract the UpdateWP folder and put both files in to the Zune directory on your PC.
After that everything went relatively smoothly. It took 2 or 3 tries to get the Retail ROM to take and from there the phone updated perfectly until Mango. It failed but I just disconnected USB and reconnected and it ran the update.
Thanks again
Click to expand...
Click to collapse
Hi, I just got a phone in the same conditions you have had mention(demo mode), and I thought I have done and taken the same steps to flash my device, but with not avail, the skydrive file has been removed, and I was wondering if you maybe still have them(the files) somewhere and if I could "borrow" them. I mean I think I have the right ROM and the UpgardeWp, but maybe they are the wrong ones, because is NOT working for me.
Thank you very much and I hope you have a fantastic evening.
Israel
*UPDATE* never mind, I was able to do a proper flash, and now I have a good working Windows Phone...
Israel

edderspcs said:
Thanks to all who replied. I got it fixed. It was indeed some weird demo ROM or setting but its all cleared up now. I used the unbricking thread listed here
http://forum.xda-developers.com/showthread.php?t=1411300
and downloaded the ROM from here
https://skydrive.live.com/?cid=4da87ed18e0bf92d&resid=4DA87ED18E0BF92D!7216&id=4DA87ED18E0BF92D!7216
I got the UpdateWP too from here
http://forum.xda-developers.com/showthread.php?t=1262471
Only thing to note is to extract the UpdateWP folder and put both files in to the Zune directory on your PC.
After that everything went relatively smoothly. It took 2 or 3 tries to get the Retail ROM to take and from there the phone updated perfectly until Mango. It failed but I just disconnected USB and reconnected and it ran the update.
Thanks again
Click to expand...
Click to collapse
Hi
I am trying to do the same thing. But when I click the sky drive link to download the rom , there is nothing there. It asks me to login to windows live and thats it. Do you still have this rom downloaded and can you email it to me? OR where can I find this rom? Plz help.

In the middle of the "how to unbrick your dell venue pro" the rom is posted, on some russian download site.
http://forum.xda-developers.com/showpost.php?p=22415484&postcount=35
That file is hosted on my skydrive, and it is still available. It may be asking you to log in to your windows live account to access it. Not sure.

I got it ! Thank you so much!!!!!!!!!!!!!!!!!!!!!!!!!!!!

edderspcs said:
Thanks to all who replied. I got it fixed. It was indeed some weird demo ROM or setting but its all cleared up now. I used the unbricking thread listed here
http://forum.xda-developers.com/showthread.php?t=1411300
and downloaded the ROM from here
https://skydrive.live.com/?cid=4da87ed18e0bf92d&resid=4DA87ED18E0BF92D!7216&id=4DA87ED18E0BF92D!7216
I got the UpdateWP too from here
http://forum.xda-developers.com/showthread.php?t=1262471
Only thing to note is to extract the UpdateWP folder and put both files in to the Zune directory on your PC.
After that everything went relatively smoothly. It took 2 or 3 tries to get the Retail ROM to take and from there the phone updated perfectly until Mango. It failed but I just disconnected USB and reconnected and it ran the update.
Thanks again
Click to expand...
Click to collapse
hi All,
i got a working DVP after doing all steps mentioned in "How to unbrick DVP" after that when i connect my phone to Zune i am getting below error and i am not able to do anything with my phone (data tranfer,update, app install etc), please help meif you can:
ERROR: "RESTORATION ERROR" An error prevented the restoration of your phone to its previous verion.
ERROR CODE: C101002E
i have performed everything that is posted in XDA-developer about this error and when i tried to update/restore/backup from command promt using .cab file i got below error:
Id: \\?\usb#vid_045e&pid_0710#0a1846cd-8203-1781-bc2a-de1974852ebc#
{ca3d7387-f67b-11da-bbec-8000600fe800}
SN: cd46180a - 03828117 - bc2ade19 - 74852ebc
Name: Venue Pro
KITLName: QSD8XXX82BDB791
Manufacturer: DELL
ModelId: 1
Model: Venue Pro
MobileOperator:
Version: 07.00.07004.00-00000

Djha said:
hi All,
i got a working DVP after doing all steps mentioned in "How to unbrick DVP" after that when i connect my phone to Zune i am getting below error and i am not able to do anything with my phone (data tranfer,update, app install etc), please help meif you can:
ERROR: "RESTORATION ERROR" An error prevented the restoration of your phone to its previous verion.
ERROR CODE: C101002E
Click to expand...
Click to collapse
First thing I'd do is do a soft reset if you just flashed the stock 7004 ROM.
Windows Phone > Settings > About > Reset your phone.
Then, just a guess -- go into Zune Desktop > Settings > Phone > Sync Options > [Forget this phone]
Then plug the phone again and see if it lets you set it up as a new device, with update check.
If this doesn't work, the next thing I'd try is moving to another Windows machine, installing a fresh copy of Zune Desktop, and seeing if it will let you update using that. You could also use a Windows installation in virtualization using virtualbox, or an installation on another partition if you are an advanced user.
Basic troubleshooting. Just floating ideas.

Nothing worked
Technosquid said:
First thing I'd do is do a soft reset if you just flashed the stock 7004 ROM.
Windows Phone > Settings > About > Reset your phone.
Then, just a guess -- go into Zune Desktop > Settings > Phone > Sync Options > [Forget this phone]
Then plug the phone again and see if it lets you set it up as a new device, with update check.
If this doesn't work, the next thing I'd try is moving to another Windows machine, installing a fresh copy of Zune Desktop, and seeing if it will let you update using that. You could also use a Windows installation in virtualization using virtualbox, or an installation on another partition if you are an advanced user.
Basic troubleshooting. Just floating ideas.
Click to expand...
Click to collapse
Thanks for your reply.
1. when i clicked on "Desktop > Settings > Phone > Sync Options >" it shows "connect a device" and i am not able to connect my phone becouse after error pop-up, there is only one option "close" and after click on close zune shows "no device connected".
2. i have already tried it on 2 PCs, suggest me other option please.

Djha said:
Thanks for your reply.
1. when i clicked on "Desktop > Settings > Phone > Sync Options >" it shows "connect a device" and i am not able to connect my phone becouse after error pop-up, there is only one option "close" and after click on close zune shows "no device connected".
2. i have already tried it on 2 PCs, suggest me other option please.
Click to expand...
Click to collapse
If you've also tried doing the soft reset as I mentioned, you may want to see if you can use the cab sender method to update to one of the nodo builds.
http://forum.xda-developers.com/showthread.php?t=1306415
A couple quick questions --
Was this your phone and had it been working previously, or was it in this "connect to PC screen" state when you got it?
Can you think of anything you might have done to cause it to stop working?
Is it the AT&T, T-Mobile, or EU/International version?
Did you use a non-english language cab?

Answers:
Technosquid said:
If you've also tried doing the soft reset as I mentioned, you may want to see if you can use the cab sender method to update to one of the nodo builds.
http://forum.xda-developers.com/showthread.php?t=1306415
A couple quick questions --
Was this your phone and had it been working previously, or was it in this "connect to PC screen" state when you got it?
Can you think of anything you might have done to cause it to stop working?
Is it the AT&T, T-Mobile, or EU/International version?
Did you use a non-english language cab?
Click to expand...
Click to collapse
1. yes, i tried a soft reset(resetting the phone from settings->about phone->reset phone) even also perform a soft reset without SD card and try to update from zune without SD card but still getting same restoration error.
i already tried all options cab sender, mangoforall 0.2 etc/ update and restore from command promt:
getting below error everytime whenever i tried to perform any thing from command promt(.bat) :
Error: Exception from HRESULT: 0x801812C0
Call stack:
at wm7update.Program.UpdateDevice(IDeviceInfo deviceInfo, List`1 updates, Upd
ateType type)
at wm7update.Program.Main(String[] args)
2. this is not my phone i got it in a non working state showing "SD card not working".. then i performed steps mentioned in "how to unbrick DVP". after that i got a working DVP.
3. It is a T-mobile DVP and sim unlock by unlock code provided by dell.
4. It is on 7004 Tmobile ffu no cab update til now, as i am not able to send any cab via cab sender.
Note: i don't have any previous back-up of this mobile and not sure wheather the SD card is original or not.