Database Users

Radio Stack Upgrading Failed

I've upgraded my wallaby radio stack from 4.16 to 4.21 and it was failed. Now , I can't use the phone function. What should I do ? please help....

Stay at this topic:
http://forum.xda-developers.com/viewtopic.php?p=111577
or do a search after GSM Error....
Stefan

the lonk you've given asked me for username and password. And it didn't accept my xda-developers' username and password.

irsan_donald said:
the lonk you've given asked me for username and password. And it didn't accept my xda-developers' username and password.
Click to expand...
Click to collapse
But it should be your normal acoount data.... :?:
Here it comes in plain text:
How to fix GSM Error Problem ....
1. Download the XDA-Developers ROM Version 1.1
2. Install the ROM on your Device via SD-Card and bootloader.
3. The phone should start up and give you the screen allignment and the whole menu!
4.
Download an Upgrade for your device. This depends ont the model you are using. Check the sticker at the back of your device.
* If it is a PW10A-Model download RSU Version 4.16
* If it is a PW10B-Model download RSU Version 6.24.20
5. Extract the downloaded ZIP-File and copy all files to the /Windows directory of your device.
6. Copy the RSUpgrade.exe additional to the /windows/startup directory.
7. Make an soft reset of your device.
8. Maybe the upgrade will stop again at 1%, this may occur when you have an empty battery.
9. Place your device in the cradle. Run Active Sync on your device.
10. The RSU Upgrade will run in the background.
11. Wait for about 10 Minutes. The upgrade should complete in the background....
Afterwards all should work again...
Good luck....

the dialog box ask me for :
1.user id on remote host :
2.password on remote host :
3.account on remote host :
I need the 4.16 version. Can I use it in Indonesia ??

I turn on my device , and it is white blank.
I get in to the boot loader, then this message appeared :
"WALLABY
Boot Loader
v5.15
GSM ERROR"
I pressed the ACTION key, then this message appeared :
"GSM turn ON
Please Wait
f a i l !!"
What should I do ??

sos

Dear All,
Is it possible to unlock the SIM on universal
Is tit possible to change the language on the phone from french to English
Can you please guide me on how to do the above as I dont speak french
Is it possible to save the current settings on the phone if the above fails
as the operator sayzs that the warrantz on the phone is void if the language is changed or the SIM is unlocked
My current configuration
operatpor 7.113.5.132
Rom version 1.13.51 FRE
Rom Date 22-09-2005
Radio 1.03.00
Protocol Version 42.36.P8
Ext rom 1.13.132 FRE

I can help you change language from french to english.
Doesn't your Universal have a place where you can download the french ROM? If not, it is still possible to backup the french ROM. A little complicated, but i'm sure i can walk you thru the process.
Regarding the unlocking, i don't think it is possible at the moments. The geniuses are working on it but as of now, you can have it unlocked thru your provider. Just pay the fee (which i think is around 20-30€)

Dear Jorgee,
I would appreciatte if you can walk me htrough the language change, I have tried the provider which is orange switherland, that the lock is definite
A Bellah

First step is to tell me which ROM you would like? O2, Qtek, Imate or T-Mobile?
and i assume you would like it in english?
Just tell me what ROM you need and i will walk you thru it

Dear Jorge
My current configuration
operatpor 7.113.5.132
Rom version 1.13.51 FRE
Rom Date 22-09-2005
Radio 1.03.00
Protocol Version 42.36.P8
Ext rom 1.13.132 FRE
and I want to change into english

Which of the following ROM's would you like?
O2
QTEK
IMATE
Take note, flashing the ROM/Changing the language doesnt get rid of the SIM Lock

Dear Jorge,
Which ever you think is best out of all the three you have listed.
ANother question if I may, Would this affect the phone configurations by orange
Thanks

abellah30 said:
Dear Jorge,
Which ever you think is best out of all the three you have listed.
ANother question if I may, Would this affect the phone configurations by orange
Thanks
Click to expand...
Click to collapse
I guess if you want the fastest or newest? The fastest in MY opinion is the QTEK because it has few customizations. The newest I believe is O2 ROM
Regarding Phone configurations of Orange, the configurations are set thru a .CAB file which is stored in Extended ROM. All you have to do before changing ROM is to backup the extended ROM, then Flash the device to english, then run the CAB file that has the Orange customizations.
If you can give me a list of the files in your Extended ROM, i'll do my best to explain what each file does

Dear Jorge,
I guess I will use the same as youy which I thinkl would be the qtek.
Ok where do i get the programme to back upo the extended rom
Thanks

Backing up extended rom, have to install Total Commander. Then in total commander, type \EXTENDED_ROM which will show you the contents of the extended ROM. Just copy to the SD card and save in your computer, that's how you backup extended ROM
For backing up the OS ROM, refer to this thread as it was BUZZ that helped me find out what to do.
Its : http://www.buzzdev.net/index.php?op...=view&id=8573&catid=33&limit=15&limitstart=15
Just download the file at the bottom of this page (page 2) then continue on to page 3 and 4 which explains how to do it. Just PM me regarding where you are already and I will walk you thru the rest as I have already done the procedure

Hello Jorgee,
I got to this stage and created the file on the desktop but I tried to run the command in dos but I got an error message
Where can I download the qtek rom from
Thanks
A.Bellah

abellah30 said:
Hello Jorgee,
I got to this stage and created the file on the desktop but I tried to run the command in dos but I got an error message
Where can I download the qtek rom from
Thanks
A.Bellah
Click to expand...
Click to collapse
What command did you enter that caused you to get an error message?
go here ftp://xda:xdaftp.xda-developers.com/Uploads/Universal/Shipped ROMs and download UNI_Qtek_WWE_11364_151_10300_Ship.exe for the English ROM.
are you sure you don't want to backup your ROM first?
Just drop me a message if you get lost.

dos command
i want to back it up first but I am getting the folowing error on the dos command
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\> pdocread 0x0 0x3FA0000 QTEK.RAW
'pdocread' is not recognized as an internal or external command,
operable program or batch file.

Did you install EnableRapi on the PPC first before doing this?
THen you have to disable the USB connect option of ActiveSync,
Then enter Bootloader mode on yor universal,
then connect it to the computer,
then run the pdocread
is this what you did?

no I followed the articel your refered me to, I ran the enable rapi, then connected to the usb and then ran the programme.
I also tryed to download the qtek system but the link you gave me does not let me acess the site

you have to put xda:xda in the link as this is the username and password. Or use an ftp program to access the site, this might be easier

I put it in the bootloader state and still the same message

I put it in the bootloader state and still the same message, but the message on the article you refered me toi says not to do so, I have tried both methods and cantr seem to be able to get it done

Sorry, but i don't know what to say. Are you using the original cable?

Re: [AOSPA 4.2.2 JDQ39] PARANOIDANDROID 3.1 (Mar07 RE-UP) | PIE QS-TOGGLE, Bat %
Jorgee said:
First step is to tell me which ROM you would like? O2, Qtek, Imate or T-Mobile?
and i assume you would like it in english?
Just tell me what ROM you need and i will walk you thru it
Click to expand...
Click to collapse
Did you do a clean install and latest gapps?
Sent from my Nexus 4

[ROM] Windows Mobile 6.1 for HTC ELF/ELFin

VERY IMPORTANT TO NOTE:
This custom ROM is built for installation onto both the ELFs and ELFins.
DO NOT FLASH IT TO ANY OTHER DEVICES! I will not be responsible for any damage to your device.
FOR FIRST TIME CUSTOM ROM UPGRADERS:
1. Copy the Cert_SPCS.CAB and EnableRapi.CAB from the zip folder to your device's Storage Card.
2. Install the two cabs to your Device memory and do a soft reset.
3. Restart your PC or laptop (Optional)
USING THE INTEGRATED ROM UPDATE UTILITY WITH USPL CID UNLOCKER:
(ATTENTION: REMOVE YOUR 4GB, 6GB or 8GB mircoSDHC CARD WHEN FLASHING THIS ROM!)
1. Turn off your computer's Anti-Virus software if you can.
2. Activesync your device to your PC using USB port.
3. When the connection is completed (after synchronisation), double-click on [START] batch file to begin the integrated ROM Updating Utility.
4. Now follow closely the instructions that appear on the computer screen.
5. Press [ENTER] to accept at each prompt to continue the process.
6. After Step 2/3 of USPL CID Unlocker, the device screen will turns "blank white" and your activesync icon gray (in Windows XP only).
Congratulations! You have successfully CID unlocked your device. Press [ENTER] to proceed NOW!
(NB: If you failed to see the "blank white" screen, then your CID unlocking has failed.
Restart your installation process from Step No.1)
7. Your device will now proceed to update your rom. Select and hit [NEXT] at each prompt to continue.
8. When the rom updating is completed at 100%, your device will restart automatically.
9. Congratz! You have successfully upgraded to a new rom.
Enjoy!
__________________________________________________________________________________________________
I did this had no problems with my htc elf/elfin/touch over the moon with it!!!
REMEMBER: all of your installed applications will be swiped of with this ROM.
Also have fun with your upgraded windows mobile 6.1 HTC ELF!!!
__________________________________________________________________________________________________
Whiplash1995.
Cheers
WM6.1
for
ELF
__________________________________________________________________________________________________
please tell me if there is any problems post a reply...
forgot to menchion download the full thing at > http://thepiratebay.org/torrent/4277382/Windows_Mobile_6.1__en_for_HTC_Touch
DO NOT BE A NOOB FOLOW THE ON SCREEN INSTRUCTIONS!!!!!!!!!!
__________________________________________________________________________________________________

'Start' batch file does nothing.
Tried opening it directly from a command prompt, but still nothing, except it opens another dos box.
Thoughts ?

The 'start' batch file fails because the first command is 'cd RUU'. but there is not a folder called RUU.
Then it tries to rename two files which also do not exist. Hence it never actually arrives at the exe file to unlock & install the ROM.
Can this work if you simply run the exe file without renaming & changing folders ?

Hi, and thanks for that script...
The .bat works well for me but while updating the rom, I've got an 270 error... 'The images files is corrupted please check your update utility'
does any one had the same issue on his phone? Do you think I just need to download it again? (concidering that the zip file uncompressed normaly, I assume it works well...)
Thanks for your answers...

upgrading MDA Touch
please i need your Help.
I have download the" touch essential V3.5 Manilla" on my PC. But i don´t know how to send it to my MDA.
Activsyc is working.
Where kann i fine the cert_CAB?
I have also unpacked the V3.5 manilla, but there is no way to run it in the MDA how should i do this.
many thanks

My 2 cents...
If I were you I wouldn't rely on a torrent posted by a junior member (age 12) and rather download the ROM posted by Football on Rapidshare => See his post HERE <=.
I've been using it from day 1 without any problem...

gruikdadude...
gruikdadude... I understand were you are coming from but I have been very carefull on what i look for and actually this torrent file was uploaded by someone on xda developers so i am saying the update worked fine for me so why shouldnt it for you so before you start criticising a me for posting something that is just to assure htc touch owners that there is a reliable WM6.1 upgrade is there anything wrong with this......... NO!!! so before you criticise think twice !!!bell end!!!
__________________________________________________ ________________________________________________
Whiplash1995.
Cheers
WM6.1
for
ELF
________________________________________________ __________________________________________________

r there any direct download links?
as i prefer not to download through torrents...torrents downloading over here sux...

whiplash1995 said:
so before you criticise think twice !!!bell end!!!
Click to expand...
Click to collapse
Not criticizing you at all: just warning xda members that downloading any posted ROM can be harmful for their PPC...
EOF

Can you plz. give us link for zip file instead of the ttornet one
thanks in advance

can you tell me the diffrences between this rom and the original 6,1 rom? i see no manilla2d, but more differences?

hi i tried the whole procedure , but i get the ERROR[270]: Image file is currupted, can anyone help regarding this error, how to get the uncurrupted version?

Since this rom is giving a lot of people problems, why not just use one of the verified good roms from the Elf Upgrading subforum?

[Q] hw6915 wm6.1 rom

Ok..so first of all thanks for clicking on my thread.I hope somebody can help me flash a rom.I can't post the link because I'm new....I added a text file with the link(yes, it's on xda)
Post #9 describes a process of flashing this rom.
My device: HW6915 vG.39 G4(flash chip)
I am having trouble with this step pdocwrite spl -n0 -b 0x20000 0 0x80000.
Yes I know what the bootloader is and I know how to get into it.So after I connect the device via usb(while in BL mode) i run the command mentioned above.The problem is that nothing happens(screenshot included),it just stays at the same command and does not progress at all.CPU usage is little to none.And if I do try to flash the rom anyway the progress bar on sable_RUU gets stuck at 1% and after a few minutes gives an error.I tried this on XP 32 and on 7 64.
Yes, this is my first post, so take it easy.
Thanks for any help.

hello. i have the same problem but my sable ruu progress bar freezes at 51% and then pop up error:201. help?

For you it's stuck at 51% because you also flashed the bootloader(CEBL.nbf).I chose not to as it's optional.Even so I'm still stuck on the original problem.
Anybody know the answer to this?

my problem is identical. i am also having trouble with pdocwrite spl -n0 -b 0x20000 0 0x80000.after i run the command nothing happens,it just stays at the same command and does not progress at all as in your case. then when i run sable_ruu it freezes at 51%

did you try...
did you try opening the command prompt as administrator?
Code:
1. Click on start
2. Type command
3. Then either right click and then pick run as administrator or just CTRL + SHIFT + Click
If that doesn't work you can try disabling UAC by clicking start, typing UAC pick the first option then dragging the slider to the bottom and restart computer

You need to write SPL when phone is on and connected with ActiveSync, not in bootloader.

Spiaatie said:
You need to write SPL when phone is on and connected with ActiveSync, not in bootloader.
Click to expand...
Click to collapse
Ok it works thanks guys for all the help.
Will report back to your thread and tell you about my findings
Thanks,appreciate it

Thanks from me too. On the first look wm 6.1 runs faster than 5.0 and gps does not work (igo 2006 plus-can not find gps com port).

my suspicions on gps is it might be driver related in asset viewer (Settings/System/MyCPL 7) under GPS it used to state whether it was on or off in WM5 but now it says N/A

jambongo said:
my suspicions on gps is it might be driver related in asset viewer (Settings/System/MyCPL 7) under GPS it used to state whether it was on or off in WM5 but now it says N/A
Click to expand...
Click to collapse
Yes the driver is indeed missing as this is ported from a hp without gps(i guess so anyway).First clue is that it doesn't include any base navigational software.
Second igo 8 reports ''gps driver not found''

n can you! help???
you seem to know how to proceed to tryin' roms on you hw6915;
......i don't!
can u help me, i'm really a newbie on this!!!
i wish there was an "upgrade your ipaq verson for dummies" or somthing!!
i got the hp ipaq hw6915, an usb connector, Internet access!! anything else?

oussahoo said:
you seem to know how to proceed to tryin' roms on you hw6915;
......i don't!
can u help me, i'm really a newbie on this!!!
i wish there was an "upgrade your ipaq verson for dummies" or somthing!!
i got the hp ipaq hw6915, an usb connector, Internet access!! anything else?
Click to expand...
Click to collapse
Beware dude this is higly experimental.There is no GPS for example.The rom is wm6.1.This is just for people who want to test and no it obviously not official.All files can be found at the link in the TEXT file I attached to my first post.
1.Connect your device to activesync(suggest a hard reset first,however it's optional)
2.Extract SPL vG.39.7z anywhere you want.
3.Run ''Command prompt'' (if using vista/7 RUN AS ADMINISTRATOR)
4.Enter this command pdocwrite spl -n0 -b 0x20000 0 0x80000 (WAIT UNTIL IT FINISHES).This command replaces a file in the ROM which allows you to flash ''non-original roms'' basically software CID unlocking which allows flashing of ''cooked roms''
5.You will get warnings on your hp regarding a dll file(itsutils.dll) PRESS YES
6.Put your device in bootloader mode.[hold the two buttons next to the joystick(the round thingy) and shortly tap the reset button with your stylus
7.Open activesync,go to connections and untick allow USB connections
8.Extract 6915_ENG.7z and run Sable_RUU
9.Press on the big ''Upgrade button''
10.There will be a progress bar, when it's done it should say something like '' Update finished !!''
11.Go back to activesync and re-tick allow USB connections
I wrote this for everybody who's got trouble flashing roms on their hw69xx.Yep I had this problem too.
This detailed enough?

jambongo said:
did you try opening the command prompt as administrator?
Code:
1. Click on start
2. Type command
3. Then either right click and then pick run as administrator or just CTRL + SHIFT + Click
If that doesn't work you can try disabling UAC by clicking start, typing UAC pick the first option then dragging the slider to the bottom and restart computer
Click to expand...
Click to collapse
A question ....
but it happens to me the same error in XP and not out of the 1% resulting in the error 201
Can you help me!

hi
I have the hw6915
to me the procedure doesn't go
he/she writes me "client_initialize Fail Error 601"
a question: what I write on the Command Pront
thanks

for further information
the cell doesn't connect him to activesync
it is jammed on screens her/it USB - LOGO HP INVENT and in low vG.39
THANKS

@spiaatie
mine is in bootloader
however it doesn't connect him with Activesync
what do I have to do?
which procedure do I have to do?
thanks

can't program ipaq 6945
When ever I push upgrade button, it just hangs and afer a while I get the message:
client_getosver Fail !! Error :501
I'm using it on windows XP,
could someone help me!!!
Thanks!

rra_pn said:
client_getosver Fail !! Error :501
Click to expand...
Click to collapse
Did you install SPL?

Yes, I did de pdcowrite on command prompt, then it gave me the warning on my ipaq and then it finished.
After that I unticked the allow usb connections on active sync
then I press the two buttons next to the joystick and press the reset
I run sable
and then it does what i Posted
Thanks!

Help on upgrading HTC P3300

Hi all.
I have been reading in the forum for hours and hours, without beeing able to find an easy way (that I understand) on how to upgrade.
I am an old (retired) man, and not stupid (I hope) but have a slight consentration problem.
I want to upgrade from WM5.0 to Windows Mobile 6.1
(+Opera Mini, support for 8GB SDHC and TomTom 7)
I have: a HTC P3300 ARTE100
IPL 1.12.0001
SPL 1.12.0000
GSM 02.67.90
OS 1.12.0.0
ROM version: 1.12.405.1 WWE
ROM date: 9/12/06
Radio version: 02.67.90
Protocol version: 4.1.13.28
ExtROM version: 1.12.405.101
The device is not locked (I belive) because I can use any SIM I want in the phone.
I have tried to flash to SPL 1.11.cmon, but ended up with SPL 1.11.0000
So I downloaded and installed HTC_1.12.405.01_026790_WWE_SHIP This put my phone back to original, (SPL 1.12.0000)
Synced and copied enablerapi.cab and Cert_SPCS.cab Disconnected, and ran both of them.
I tried to run start_uspl.exe, but it will only try to update from current rom ver. 1.12.405.1 to ver.9.99
And after a while I get a message on my P3300:
Unable to open log file....
tiny_console_init done
And ROM ver. is back to SPL 1.12.0000
Suggestions anyone?

ok pm me and i will walk you though.
first update to the newest version of active sync thought.
next make sure your device is fully charged.
next back up all data from your device. flashing a new rom will erase all data.
next cid unlock read the first post and download the attachments
http://forum.xda-developers.com/showthread.php?t=308242
after you have done this pm me.
as for opera just download one of the many prepacked opera cabs. here is a link to one that should work. http://forum.xda-developers.com/attachment.php?attachmentid=281464&d=1266292843
to my limited knowledge of sdhc support and the p3300 all of the cooked roms have sdhc support cooked in. so when you get a newer rom on your phone sdhc should work.

Arggggh
I can use any SIM in my phone. Is CID unlock really neccesary?
I downloaded pof's Artemis_USPL and ran it, but it seems nothing was changed.
I too wants to change the ROM ver. from 1.12.405.1 to ver. 9.99
And the link to: HTC P3300 WWE factory rom - is dead.
But I found HTC_1.12.405.01_026790_WWE_SHIP another place.
I have also found and downloaded AndreW82_WM6.1_21056_Lite_v1.4_WWE.nbh
But am afraid to try to install it since my ROM is not ver. 1.11.cmon.
Here is what I have tried so far:
Downloaded Artemis_USPL
Synced and copied enablerapi.cab and Cert_SPCS.cab
Disconnected, and ran both of them.
Booted and Synced.
Started start_uspl
(wich opened a dos window)
After 10....20.... and so on, phone softbooted.
Message on phone:
UNABLE TO OPEN LOG FILE
TINY_CONSOLE_INIT DONE
PDA Phone ROM Update Utility 3.0.3.1 stardet automatically on PC.
Checked: I understand... and clicked Next
Checked an confirmed preparation steps, and Next
New window:
Current version 1.12.405.1
Select from below UPDATE the current ROM version.
clicked on Update
Program then wants to update to version 9.99
Clicked on Next
New window:
This will take approx 10 min, - Next
Phone screen changes to red green blue, runs a bar up to 100%, and the softboots.
Takes about 10 sec, not 10 min.
Error message pops up on PC:
Error 270
Image file is corrupt.
EXIT
Disconnected anf booted phone.
SPL is still the same (SPL 1.12.0000)
___________
Trying again:
Synced
Ran EnableRapi.cab and Cert_SPSC.cab
Did not boot or disconnect, but started start_uspl.exe
10...20... and so on
70% phone-screen goes white
PDA Phone Update Utility 3.0.3.1 pops up on PC.
No reaction on phone, Hard reset.
SPL is the same (1.12.0000)

...
mini z
soft reset when the ruu window opens..
when dos window closes..
ok, now for my question..
my spl is 1.11.cmon so cid is already done and has been for a year, i have flashed several roms so i am not a noob at flashing..
the connection from my pc to artemis dsconnected during flash and now in bootloader.. it wont flash from sd..
i know how to use the mtty commands coz iv used it before, but cant remember how to get it to select USB from the 'port' menu..
*how do you get it to select usb?
i know how to use mtty but cant remember

Ai... I'm sorry man, I've never flashed an Artemis before and I don't have the tools to do it either. Maybe you should ask in #xda-dev on IRC?

...
I.m doing something wrong, but don't know what.
Phone on - connecting USB - phone syncs.
Start start_uspl.exe - at 100% screen goes white.
Softresetting - waiting for sync - then confirming on PDA Phone Update Utility.
(The uspl.zip i got from raving_nanza)
After it has finnished, phone boots - and I still have USPL ver. 1.12.0000

raving_nanza said:
ok, now for my question..
*how do you get it to select usb?
Click to expand...
Click to collapse
PC:
Active sync > File > Connection Settings > Allow USB connections, and select a port. (e.g. COM2)
Phone:
Phone > Settings > Connections > USB to PC > Enable
Then:
Phone > Programs > Active Sync > Menu > Connections > Sync PC's with this connection > Select USB.

Mini-Z said:
PC:
Active sync > File > Connection Settings > Allow USB connections, and select a port. (e.g. COM2)
Phone:
Phone > Settings > Connections > USB to PC > Enable
Then:
Phone > Programs > Active Sync > Menu > Connections > Sync PC's with this connection > Select USB.
Click to expand...
Click to collapse
cheers dude..
try this..

raving_nanza said:
try this..
ruu_signed.rar
Click to expand...
Click to collapse
Hi
Tought I should not try to install the .nbh file if USPL was not 1.11.cmon.
Btw:
One of the first steps is to take out the SD-card. Is that what I am doing wrong?
(Should I copy the AndreW82xxxx.nbh to my SD, and have it installed when I run the uspl/RUU?)

...
this is 1.11.cmon.. just try it..

...
take out sd card..
dont flash andrews rom..
do uspl with the one ive just uploaded on this thread..

raving_nanza said:
take out sd card..
dont flash andrews rom..
do uspl with the one ive just uploaded on this thread..
Click to expand...
Click to collapse
This is obviously where I miss something.
the RUU_signed is a .nbh file.
So how do I start it?
Should I use activesync and put it on the phone and some how start it from there?
Or should I put it in the same folder as the uspl cmon, and then run the uspl?
Or is there another trick that I have missed?

put it in the uspl folder and overwrite the one inside..
then do uspl..

raving_nanza said:
put it in the uspl folder and overwrite the one inside..
then do uspl..
Click to expand...
Click to collapse
"Error 270 Update error"
"The image file is corrupted. Please check uour update utility."
(I am using XP sp3.)
(But this time it at least tried to update from 1.12.0000 to 1.11.nosize)
I also tried renaming the ruu_signed to arteimg.nbh
Seems my phone has some kind of lock on the SPL 1.12.0000.
Can it be write-protected in some way?
And if so, how can I "unlock" the write protection?

I.m doing something wrong, but don't know what.
Phone on - connecting USB - phone syncs.
Start start_uspl.exe - at 100% screen goes white.
Softresetting - waiting for sync - then confirming on PDA Phone Update Utility.
(The uspl.zip i got from raving_nanza)
After it has finnished, phone boots - and I still have USPL ver. 1.12.0000
Click to expand...
Click to collapse
I've made several attempts to install 1.11.cmon, none was succesfull.
Two days ago performed another try, but this time without SR. and it worked

q123456 said:
I've made several attempts to install 1.11.cmon, none was succesfull.
Two days ago performed another try, but this time without SR. and it worked
Click to expand...
Click to collapse
Asuming SR means SoftReset - I tried, but it did not help.
Same Error (270)
So I tried again, and again.
Cert_SPCS.cab and enablerapi.cab without disconnecting nor syncing the phone.
Then start_uspl.exe, and on white screen I just started (or rather continued with) the RUU.
WOOHOO - on 3. attempt my SPL changed to 1.11.cmon
So, if you read this post, and have the same problem as I had, here is how to do it:
Download attached file, unzip it, and read the install.txt

...
1.1.cmon is 1.11.cmon
dont forget to thank POF
glad you done your spl now, which rom you gonna use, i suggest the andreW82 rom or the babbelut rom..

andreW82 +1
I glad, you did it, Mini-Z

raving_nanza said:
1.1.cmon is 1.11.cmon
dont forget to thank POF
Click to expand...
Click to collapse
1.1.cmon was the name of the zip you sent, but OK, I have changed it now.
CREDS for pof is added to install.txt

raving_nanza said:
glad you done your spl now, which rom you gonna use, i suggest the andreW82 rom or the babbelut rom..
Click to expand...
Click to collapse
I have a slight consentration problem, so I forgot that I am only half way.
I have downloaded a couple of .nbh files (AndreW82, Touch 4.02, Tom Black v5.0).
I have not yet decided wich one to use.
I want to install TomTom7 and Opera Lite + support for 8GB SDHC.
Now I just have to figure out how to install one of the .nbh files.