Database Users

gsm dead after RSU - please help

I've got XDA phone from O2 (UK) - PW10A1, boot loader 5.15, rom 3.17.03 . I tried to perform Radio Stack Upgrade but unfortunately it stops flashing at 1% every time I boot. What can I do to make my phone alive again? I've got SD card and programmer, usb craddle. I still can connect to xda with active sync. Please help.

spako said:
I've got XDA phone from O2 (UK) - PW10A1, boot loader 5.15, rom 3.17.03 . I tried to perform Radio Stack Upgrade but unfortunately it stops flashing at 1% every time I boot. What can I do to make my phone alive again? I've got SD card and programmer, usb craddle. I still can connect to xda with active sync. Please help.
Click to expand...
Click to collapse
Try to Connect it to the cradle and try to access your file using Active Sync Explorer button, then delete the file RsUpgrade.lnk or any related file from the \windows\StarUp folder it will stop upgrading. if you phone still dead please tell me what version you're trying to upgrade, and I will give you instruction of how to bring it back alive.
QTEK 1010
RU 4.00.11 ENG
RSU 4.21 :twisted: :twisted: :twisted:

spako said:
I've got XDA phone from O2 (UK) - PW10A1, boot loader 5.15, rom 3.17.03 . I tried to perform Radio Stack Upgrade but unfortunately it stops flashing at 1% every time I boot. What can I do to make my phone alive again? I've got SD card and programmer, usb craddle. I still can connect to xda with active sync. Please help.
Click to expand...
Click to collapse
What radio stack were you trying to upgrade to?

rpc said:
Qman said:
Try to Connect it to the cradle and try to access your file using Active Sync Explorer button, then delete the file RsUpgrade.lnk or any related file from the \windows\StarUp folder it will stop upgrading. if you phone still dead please tell me what version you're trying to upgrade, and I will give you instruction of how to bring it back alive.
Click to expand...
Click to collapse
When I delete the link POGRAMME B.lnk from \Windows\StartUp folder and soft reset the phone there is no flashing at start up indeed but I still have non working gsm part of the palmtop. When I try to manually run the PROGRAMM B (RSU) the flashing stops at 1% and I can see the displayed message "Flash Failed! Press OK to restart your device.". Do you have any suggestions how to flash RSU (gsm part)?
Click to expand...
Click to collapse

Qman said:
What radio stack were you trying to upgrade to?
Click to expand...
Click to collapse
I've downloaded the upgrades from O2 (UK) provider's site:
Radio_Unit_Upgrade_v31703.exe for RUU
and
RSUv1.15(GPRS_421_ENG_O2).exe for RSU.
I already have upgraded OS part of my PDA to 3.17.03 but still have non working GSM part of phone. Please help.

Re: GSM dead after RSU - please help
spako said:
When I delete the link POGRAMME B.lnk from \Windows\Startup folder and soft reset the phone there is no flashing at start up indeed but I still have non working GSM part of the palmtop. When I try to manually run the PROGRAMM B (RSU) the flashing stops at 1% and I can see the displayed message "Flash Failed! Press OK to restart your device.". Do you have any suggestions how to flash RSU (GSM part)?
Click to expand...
Click to collapse
When say manually ran programm B does this mean that you
located and copied RS Upgrade.exe, RSUpgrade.cp64
,monitor_ul_bs.map and monitor_ul_bs.m0 to your devices windows folder then ran RS Upgrade.exe to start the radio upgrade?

Re: GSM dead after RSU - please help
[quote="QmanWhen say manually ran programm B does this mean that you located and copied RS Upgrade.exe, RSUpgrade.cp64
,monitor_ul_bs.map and monitor_ul_bs.m0 to your devices windows folder then ran RS Upgrade.exe to start the radio upgrade?[/quote]
No. I've installed PROGRAMME B onto my PC than I run the installation program which copied all the files to my PDA. After faulty flashing which ended at 1% I removed the .lnk file from StartUp folder and after soft reboot I ran the PROGRAMME B manually from Windows directory. Is it wrong? Should I copy all the needed files using ActiveSync Explorer? In the RSUpgrade.sa.CAB file I can see files with extensions .001 - 005 and .099. Let me know how should I do that.

WM6 upgrade fails,need help,will donate if problem is solved (please help)

After I read http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardUpgrade4
It says The WM6 does not work on PH20A2 (Harrier) (Audiovox PPC-6600 / PPC-6601 / XV6600)/ CDMA device! <-- that is my mistake
My mistake steps:
1. upgrade 2003 2nd edition to WM6 (I see 4 color strip with "NO GSM" at the bottom, stuck in there. The PPC will stop if I remove the battery for a few seconds and put battery back)
2. use mytt <-- may not hurt (I see 4 color strip with "NO GSM" at the bottom, stuck in there. The PPC will stop if I remove the battery for a few seconds and put battery back)
3. Do hard reset, format the PPC (stuck in white screen, then do soft reset. The PPC will ""NOT"" stop if I remove the battery for a few seconds and put battery back)

reflash
Have you tried re-flashing with the original ROM?

AbuGWM5 said:
Have you tried re-flashing with the original ROM?
Click to expand...
Click to collapse
What do you mean reflash?
Does it mean that Reinstall the WM6, or install other OS like WM5?
However,Without activesync how can I do that?
OR reflash mean formart?
I try to fomart my ppc, but stuck in the white screen

You got to revert back to WM 2003 SE with your original OS.

April 1 said:
You got to revert back to WM 2003 SE with your original OS.
Click to expand...
Click to collapse
I try to connect my phone under bootloader mode. However, both my computer and my notebook can not detect my Pocket PC.

king2004c said:
I try to connect my phone under bootloader mode. However, both my computer and my notebook can not detect my Pocket PC.
Click to expand...
Click to collapse
put you ppc into bootloader mode then put it into the craidle then go to startmenu on you computer
then go to computer then right ckick youll see properties click it
then system properties sould show click hardware then device manager
do you see windows CE USB Devices if you do then click it then you sould see microsoft USB Sync
if it dose then go here
http://wiki.xda-developers.com/index.php?pagename=BlueangelFAQhave

rickwyatt said:
put you ppc into bootloader mode then put it into the craidle then go to startmenu on you computer
then go to computer then right ckick youll see properties click it
then system properties sould show click hardware then device manager
do you see windows CE USB Devices if you do then click it then you sould see microsoft USB Sync
if it dose then go here
http://wiki.xda-developers.com/index.php?pagename=BlueangelFAQhave
Click to expand...
Click to collapse
I tried to upgrade my win2003 2nd edition in ppc 6600 to WM6, but it seems that WM6 won't work with ppc 6600. Then,
1. I download the WM5 rom from http://wiki.xda-developers.com/index.php?pagename=Helmi
2. Try to reflash the PPC
3. I see that the PPC response
4. Try to do the reset after finished upload rom
5. Four color strip screen & "NO gps" and "5.02... WWE"
6. Try to restart again, and wait, result is the same
7. Try to go to bootloader mode, use mtty, do "set 14 0", "task 28", "task 0", PPC still keep the same. I have tried all reset, hard reset, etc
8. *** Try to reflash the PPC again, I find out that there is no current ROM when the ROM upload program try to read my current PPC condition.
Btw, I post the question to the FAQ too

try to take out first SD Card and SIM CARD from your BA first before connect to your notebook/PC

king2004c said:
I tried to upgrade my win2003 2nd edition in ppc 6600 to WM6, but it seems that WM6 won't work with ppc 6600. Then,
1. I download the WM5 rom from http://wiki.xda-developers.com/index.php?pagename=Helmi
2. Try to reflash the PPC
3. I see that the PPC response
4. Try to do the reset after finished upload rom
5. Four color strip screen & "NO gps" and "5.02... WWE"
6. Try to restart again, and wait, result is the same
7. Try to go to bootloader mode, use mtty, do "set 14 0", "task 28", "task 0", PPC still keep the same. I have tried all reset, hard reset, etc
8. *** Try to reflash the PPC again, I find out that there is no current ROM when the ROM upload program try to read my current PPC condition.
Btw, I post the question to the FAQ too
Click to expand...
Click to collapse
You did very stupid thing, you have flashed GSM based rom to a CDMA device, the only thing you can do is to use WM2003SE, flash your device with its original or any CDMA (Harrier) based WM2003SE rom
Quick Howto:
Put your device in bootloader mode, put it on the cradle, start the upgrade including radio (the same version can be flashed on top of the previous one), this will fix your device, if it does not then after successful WM2003SE upgrade do the MTTY "set 14 0", "task 28", "task 0".
Keep me posted if you have problem
P.S.
WM5 and WM6 does not work on Harrier (CDMA Blueangel) device, i hope my instructions to help you to have at least usable device

xplode said:
You did very stupid thing, you have flashed GSM based rom to a CDMA device, the only thing you can do is to use WM2003SE, flash your device with its original or any CDMA (Harrier) based WM2003SE rom
Quick Howto:
Put your device in bootloader mode, put it on the cradle, start the upgrade including radio (the same version can be flashed on top of the previous one), this will fix your device, if it does not then after successful WM2003SE upgrade do the MTTY "set 14 0", "task 28", "task 0".
Keep me posted if you have problem
P.S.
WM5 and WM6 does not work on Harrier (CDMA Blueangel) device, i hope my instructions to help you to have at least usable device
Click to expand...
Click to collapse
I can reboot my device now, but the bluetooth does not work (all other main function seem works OK). I hope there is some solution that help me to fix the bluetooth becuase I have a external bluetooth gps receiver which I need to use it with my ppc all the time. Please help

king2004c said:
I can reboot my device now, but the bluetooth does not work (all other main function seem works OK). I hope there is some solution that help me to fix the bluetooth becuase I have a external bluetooth gps receiver which I need to use it with my ppc all the time. Please help
Click to expand...
Click to collapse
Please understand what xplode wrote to you, you can not use the GSM ROM on your device, so dont try to check bluetooth etc, go back and reflash your device with the original ROM following what explode said above. Dont you want to save your device?

April 1 said:
Please understand what xplode wrote to you, you can not use the GSM ROM on your device, so dont try to check bluetooth etc, go back and reflash your device with the original ROM following what explode said above. Dont you want to save your device?
Click to expand...
Click to collapse
I have already find a CDMA rom. Now the only problem in my phone is bluetooth

Well describe the exact problem, BT does not turn on at all, or maybe it returns error of some kind?
Please be more specific

xplode said:
Well describe the exact problem, BT does not turn on at all, or maybe it returns error of some kind?
Please be more specific
Click to expand...
Click to collapse
So far, I can use the phone without any problem. Previously, I tried to upgrade my phone because I want to use bluetooth headset to listen music. That can only be done in WM5 or later. Now I reinstall my CDMA version of WM2003. I find out that the bluetooth does not work due to expire of lincese key. Does anyone have any suggestion how I can over come it? I just want my phone back to exact a few day ago. Thanks
thanks

lincese
Someone has posted the attached file and said that it can fix BT license expired error. I have not tried it myself since I dont face such prob, so use it on your own risk.
To use it - extract archive to your PocketPC and run EXE file.

meehaa said:
Someone has posted the attached file and said that it can fix BT license expired error. I have not tried it myself since I dont face such prob, so use it on your own risk.
To use it - extract archive to your PocketPC and run EXE file.
Click to expand...
Click to collapse
Thanks, but does not work on my PPC6600

Error 260 on SVP M3100 HERM100

Hi, I hope someone out there can shed some light onto this problem. This is what I have: Orange SVP M3100; Operator: 14.123.1.614; ROM Ver.: 1.23.61.4; ROM Date: 07/13/06; Radio Ver.: 1.06.00.00; Protocol Ver.: 32.37.7010.01H.
I've downloaded and successfully (I think) flashed Hard-SPL-V7.
Bootloader used to read: HERM100; IPL-1.01; SPL-1.04.
Bootloader now reads: HERM100; IPL-1.04; HERM100; SPL-210.Olipro.
The phone still works and syncs. properly, but when I try running SPV_M3100ROMUpdate_0407, it eventually returns Error 260 (Update utility cannot connect to your PDA Phone.) This happens in Vista Ultimate and in XP Pro.
The program will go as fare as identifying the current image as Ver.: 1.23.61.4 and suggests to replace it with image Ver.: 2.11.61.1 however, when I click on OK, it puts the phone into Bootloader mode, disconnects the USB connection and unable to reconnect again. After this I have to do a soft reset and everything goes back to normal.
I'd very much appreciate any ideas to help me get around this conundrum. Many thanks.

put device into bootloader and try flashing from there, otherwise try sd card

OK, I could not flash from Bootloader either; same error message.
Extracted the SVP_M3100ROMUpdate_0407.exe onto the SD card.
Ended up with the following files: EnterBL.exe; GetDeviceData.exe; README.doc; ROMUpdateUt.exe; RUU.dll; RUUUI.dll; RUU_signed.nbh.
None of the above files will run on the PDA. What do I do next? Sorry for being such a novice and thanks again.

commnet said:
None of the above files will run on the PDA. What do I do next? Sorry for being such a novice and thanks again.
Click to expand...
Click to collapse
Correct, the files are not run from the device.
The hermes wiki has the directions for flashing from an SD card, go check it out.

Thanks for that jdc. I found the information you have suggested and here is what I did so fare:
-Formatted the SD card.
-Renamed the ROM image file to HERMING.nbh
-Inserted the SD card with the renamed image file into the phone.
-Restarted the phone and confirmed that it was reading from the card.
-Put the phone into Bootloader mode by pressing PWR+OK+Reset.
The multi-colour Bootloader screen comes up and nothing else happens. I'd tried pressing the PWR button just in case, but it had no effect.
Any more ideas? THANKS!

SPV m3100 upgrade - error 260 - connection drops when allowing enterBL.exe to run on
Hi - am going through the same process to upgrade my SPV m3100.
I've followed Mr Vanx's guides to the letter - ROM update from 1.23.61.4 to Hard-SPL-2.1 - as soon as i click 'yes' on the phone to allow enter.BL.exe to run - the connection between phone and laptop immediately drops.
I've tried using different USB ports as suggested in different threads = but to no avail
Am running Vista Home Premium.
I'm a novice so sorry for sounding stupid - any help would be really appreciated.

I had the same error until I disabled the phone lock. Worked ok after that

I had this problem for awhile, and I'm using Vista. I can't remember the problem to explain it, but I did one of 3 things to fix it.
1. Follow Mr Vanx's Vista Guide. The most important part is downloading his attached drivers and getting Vista to detect your phone as an "HTC USB Device" or "HTC USB Sync" or something like that.
2. Then I would recommend installing the official ATT Rom, you can download it off of HTC's website.
3. Install Schaps Advanced Config cab, and disable "security warnings"
After this done, you should be able to install a cooked rom from here.

S.O.S.......can't connect to PC

Hey folks,
I can't get my unit so show up in my PC....i have installed activesync. The unit charges but thats about it.
Can anyone help me out here?..I would really appreciate any ideas...
thanks

it would be help for others to help you if you state what rom you have loaded original or cooked. If you have installed hardspl and then downloaded a cooked rom from here or somewhere else then you might have advanced networking selected in the rom to switch it off and allow active sync to recognise it simply click start > settings > connections > usb to pc and untick it.
If its an original rom then you will have to state what it is that you have installed also state what software you have loaded on to it ,as some software to play silly buggers with active sync

Hello!
i've got the same Problem as the Threadstarter...
Ive loaded the following ROM:
http://forum.xda-developers.com/showthread.php?t=458456
http://www.4shared.com/file/90040149/a7472809/GoldenGlobe_Black_GER_V10.html
(german version ;D)
now, i flashed successfully, (i believe without hardspl, as i wanted to flash hardspl it caused an error while flashing, so i tried without it.. (chosen Secure SPL in the flash-tool) )
After flash, the phone rebooted, and it didn't connect anymore -.-
the advanced networking also is switched off...
maybe i have to flash another one with the sd-card method...

xover§, talk about russian roulette...
Go to page 116, post 1160 of the Hard SPL thread in upgrading section. Instructions on how to install Hard SPL using the sd card method.
If you try to flash the Hermes without Hard SPL using the sd card method, be prepared for failure.....
Cheers...
As for active sync, have you upgraded your PC's .net framework to 3.5?

got vista.. no need for .net framework anymore xD, it's included... (and yes, the newest version..)
holy F**k...
this post (page 116, post 1160) is exact what i need xD thanks ...
[edit]
okay more people got the problem with the flash:
you can see it here:
http://forum.xda-developers.com/showthread.php?t=458456&page=121
hope there is a fix soon
[/edit]

Problems flashing hspl2_1024 **solved**

Hi all, I'm a total noob at this but I've read every possible thread about the Tmous 1024 HD2 concerning flashing hspl2_1024 and the error code that says failed usb connection.
My problem is a bit different from the others' problems but I'll try to be as thorough as I can.
Let me start off first by listing my phone and all of its "stats"
TMOUS HTC HD2
Ram - 576MB
Flash - 1024MB (I'm guessing that this is the ROM size)
OS version - 5.2.21889
Manila Version - 2.5.20121412.1
ROM version - 2.10.531.1 (82076) WWE
Radio Version - 2.08.50.08_2
SPL - 2.08.0000
I'm at the very beginning of the process (flashing the hspl). I've read mskips tutorial backwards and forwards several times.
The first problem is that WDMC doesnt pop-up when the phone syncs with the comp. Matter fact, the green WMDC screen has never shown up on my comp., not even when I go into the start menu and click WMDC (I've tried every usb port on the comp and have visited microsofts website and downloaded and installed their WMDC a few times). All that comes up when I click WMDC is the connection settings that says Device connected.
The second problem is that when i click the next screen on the hspl2 install window, I get an error window that says something about rapi.dll not being able to be found (i get that error twice and then it seems to resume installing).
Following that, I get the usb failed connection error (a couple minutes later) and hspl2_1024 closes down. My HD2 never goes to the tri-color bootloader screen. I've tried going into the bootloader screen prior to installing hspl2_1024 but that didnt work either.
I'm completely stumped and have searched this forum for the answers to no avail. I've done a hard reset and tried again, but that didnt work. The only thing I havent tried is putting the hspl2 on my sd card and doing it from there, which from what I've read over the past few days is basically considered a no no.
I need help and all help would be greatly appreciated.
Would have pictures but the forum wont allow me to post any.

Flashing TMO HD2
Back up all data on your phone before flashing.
This is what I did and worked.
Assuming you purchased the HD2 in the US from TMOBILE.
1. Change your sync settings on your phone to use Active Sync not the usb.
2. Plug in your device to your computer. Hopefully it recognizes your phone. (If it doesn't then you might need to re-install the windows mobile device center)
3. Once connected run HSPL2_1024. Follow instructions there and should connect. Your phone should have the RGB screen. HSPL program will prompt you which version you want to install. I used 1.0 as it was the only selection
4. When completed it should say something with "HACKED"
5. Reset your phone by taking out the battery for 5 seconds.
6. Once it's powered on it should connect through Windows Mobile Device Center.
7. Now it's time to flash your custom ROM. Hopefully you have the CustomRUU.exe file together with the nbh file.

Funkyrocemz said:
The first problem is that WDMC doesnt pop-up when the phone syncs with the comp. Matter fact, the green WMDC screen has never shown up on my comp., not even when I go into the start menu and click WMDC (I've tried every usb port on the comp and have visited microsofts website and downloaded and installed their WMDC a few times). All that comes up when I click WMDC is the connection settings that says Device connected.
Click to expand...
Click to collapse
Mine never comes up either,
click start and start typing 'windows mobile .....' in teh search box and you should see it come up in the list. (round green icon)
either right click that and choose pin to start menu or drag it to the desktop as a link, then you can start it manually. You should find that once you are using it, it starts to come up on its own 'most' of the time.

never mind it seems my computer is to blame... issue solved!