[Q] HSPL help - Surround General

Hi, im new. I really want to flash the 7.8 rom that just came out but i have a few problems/questions.
1. I bought my device used, i dont know if it has ospl or not. PS when i go into bootloader mode i get a White screen that gives me option to restore to Factory settings and something else, im guessing thats for stock firmware? well ospl.
2. ¨WARNING TO ALL:
Do NOT use RSPL / HSPL with Mozart 4.XX and other RUU ROMS with MANGO.
All WP7F devices affected: MOZART, GOLD, SCHUBERT, MONDRIAN, SPARK!
It will damage your device. Not a joke¨
and
List of supported MIDs:
Gold: “PC92****”, “PC921000”
Mozart: “MOZA1000”, “PD67****”, “PD671000”, “PD671200”
Mondrian: “PD26****”, “PD261000”, “PD261100”
Si i have mango, just to be sure, i dont have ruu mango like it says up there right? it that a custom rom?
and my mid is pd26100, not pd261000. Does pd26**** include my mid? because it has 8 digits, mine has 7 digits.
can i do the hspl and get 7.8? thanks in advance

how come i nerver get replies..

i need to know if its already hacked or not

if i have spl on my bootloader screen

or should it say ospl?

ill be waiting

how can i access developer forums?

First of all, go into bootloader mode (power button + volume down!). Write ur SPL version here so we could help u. P.S: Ur MID is supported, cuz u can't see the last digit in the bootloader mode.

SlightlyOffensive said:
First of all, go into bootloader mode (power button + volume down!). Write ur SPL version here so we could help u. P.S: Ur MID is supported, cuz u can't see the last digit in the bootloader mode.
Click to expand...
Click to collapse
its spl 1.52.2250.4

CarloAguilar said:
its spl 1.52.2250.4
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1195647
Use this guide to install HSPL. Launch RSPL first, then install HSPL. After that go into bootloader again and check HSPL graph. It should be like HSPL-1.52.2250.4.
Then just launch ROMUpdateUtility in your ROM's folder.

Give us feedback about ur progress.

SlightlyOffensive said:
http://forum.xda-developers.com/showthread.php?t=1195647
Use this guide to install HSPL. Launch RSPL first, then install HSPL. After that go into bootloader again and check HSPL graph. It should be like HSPL-1.52.2250.4.
Then just launch ROMUpdateUtility in your ROM's folder.
Click to expand...
Click to collapse
Thanks you so much. by the way any good roms you might recommend? I was gonna install the 7.8 rom but someone told they dont recommend it

SlightlyOffensive said:
Give us feedback about ur progress.
Click to expand...
Click to collapse
I did it thanks. Well the hspl part. What i need to figure out if how to install the rom... Where is ruu?

I'm using Cerebellum 7.8 ROM (http://forum.xda-developers.com/showthread.php?t=2080612). It is full unlocked and stable. Download it and run romupdateutility.exe.

Related

Hspl2:critical error

hey guys trying to flash my first WM(US T-MO HD2) phone but its not working out.i followed every procedure given by MSKIP but i keep getting this message after pressing next on HSPL2_RUN: "CRITICAL ERROR,FLOW:00000003,ERROR CODE:00000004,DESCRIPTION:BAD MODEL ID".i turned off antivirus and restarted my windows 7 then connected my device with WINDOWS MOBILE DEVICE CENTER v.6.1 and then executed the HSPL2_RUN but didnt work out.bootloader screen shows up at the bottom saying usb and the phone didnt brick it just stayed in bootloader till i took the battary out and restarted the phone.what am i doing wrong please correct me.thank u
pretty sure thats the wrong hspl2.
Use teh link in my sig to get hspl1024 and compare it to the one you have,
I agree sounds like the wrong hspl. When you actually flash it the hspl should be 2.08.0000 not 2.0.0000 as the unlocker provides 2 options.
lwrdrchvy2 said:
I agree sounds like the wrong hspl. When you actually flash it the hspl should be 2.08.0000 not 2.0.0000 as the unlocker provides 2 options.
Click to expand...
Click to collapse
or did you mean to say "When you actually flash it the hspl should be 2.08.hspl not 2.08.0000 as the unlocker provides 2 options."
I was referring to the actual ruu, when the window displays on your pc it needs to be the 2.08.000 hspl, once the phone is unlocked the spl line will read 2.08.hspl like you stated.
thanx guys i will try SAMSAMUAL's HSPL2_1024_RUN and c if it goes through.thanx
thank u SAMSAMUEL that was the right HSPL.thanks to u and other i've finally succcessfully flashed my first WM phone.
all credit goes to Bepe, Cotulla and the DFT whos genius gave us HSPL
hspl1024
@samsamuel -
im very new to this and am pressuming i need hspl1024 for my t-mobile htc hd2. i tried looking in your signature but couldnt find it. is it hspl3 that u mean?
trying to get hspl so that i can switch the os to andorid.
it would be great if you could help and email me at [email protected]
thanks again
zorawar said:
@samsamuel -
im very new to this and am pressuming i need hspl1024 for my t-mobile htc hd2. i tried looking in your signature but couldnt find it. is it hspl3 that u mean?
trying to get hspl so that i can switch the os to andorid.
it would be great if you could help and email me at [email protected]
thanks again
Click to expand...
Click to collapse
hspl3 is just an updated hspl1024, updated to support more model id's. You can use either. hspl1024 is on page 99 of the HSPL thread, however yes, you can use hspl3 in my sig. choose 2.08.hspl not 2.08.0000(0000 is stock)
When you say so you can switch to android, you dont mean the youtube vid and connected site with the 'android beta OS installer' do you? which says you need hspl 1.42.hspl? cos thats a fake.
Please People...I really need help here..My phone make me crazy...
I try to flash my EU HTC HD2 with Android Nand rom and i have problem with that so i decide to put everithing on default with stock rom...
I download it and try but all the time error 290, and i read and read and somebody said that i need to have 1.42.HSPL (in that moment mine was 2.08. HSPL) ...so i do that with the HSPL2_Run and all procedure to back my hd2 to STOCK was faild again...
So i decide to turn beck HSPL to 2.08.HSPL and install some CustomRUU but from that point i have the same
CRITICAL ERROR
FLOW:00000003
ERROR CODE:00000004
DESCRIPTION:BAD MODEL ID....
I use HSPL2_RUN and HSPL4...and it was working...but now just error...What happend? What can i do?
How that can work in one moment and in another not... :-/
Forward Thankful...
In bootloader, what does the top line of text say?
same problem as Camsy..
in top right of bootloader i've RUUNBH, and after this there's 8g8g8g8 SS-BC.
Now i've loaded hspl.3.03 but i want to downgrade at hspl2 cause hspl3 is not compatible with my hd2.

Help with HSPL

Hi there,
I've bought my HTC Leo 1 week ago and I want to install Android on it. I'm following the steps of this post but it's a little hard if you haven't flash a cell phone ever
The thing is that my cell phone has SPL 3.03.0000, but I need HSPL 1,2 or 3, So I need to downgrade the SPL to use the right HSPL.
Does anyone know how to downgrade the SPL? If I understood right I need to flash a new ROM of win mo 6.5 in my cell phone with the right spl, but I don't know where to find it.
Thanks!
Search for HSPL2 or HSPL3.
You actually need HSPL4 AFAIK. Just search for HSPL4 then download etc. Then go in to bootloader and run the .exe found in the file you've downloaded. Click through the steps and you'll get to a screen with a drop down menu, choose 2.08.HSPL from the menu. Then just click next and it'll flash.
Sent from my HTC Vision using XDA App
Skellyyy said:
You actually need HSPL4 AFAIK. Just search for HSPL4 then download etc. Then go in to bootloader and run the .exe found in the file you've downloaded. Click through the steps and you'll get to a screen with a drop down menu, choose 2.08.HSPL from the menu. Then just click next and it'll flash.
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
then I need HSPL4. I just saw this post and it says "Android / WP7 / MAGLDR don't support HSPL3.03/OSPL3.03. You need HSPL2.08 to run Android / WP7 / MAGLDR." So, among all the HSPL releases, the only one that doesn't work is the 3.03? If that's right the HSPL4 should work, I'll give it a try
Oh, I just see this post and it says "You must have hspl 2 or 3 for android to run well please use HSPL GUIDE" . Is there any problem with HSPL4 of the guide is old?
It won't matter. All HSPL4 does is flash 2.08.HSPL to bootloaders that have SPL 3 and up as the older versions are compatible with older SPL's (bootloader).
Sent from my HTC Vision using XDA App
Well, I have another problem now
I'm following this steps to put HSPL4:
2. Synch Phone with PC in Windows Mobile!!! It has to be connected to activesync or WMDC via USB cable
3. Run HSPL4.exe from your pc and read all the text carefully
4. When finished reading click next in the HardSPL program
I connect my phone to the PC, and the Windows Mobile center pops out, but when I go to the ActiveSync on my phone it says that I should install the ActiveSync software in my pc (I don't know why but I can't install ActiveSync on my pc, it says that my software is uncompatible (Windows 7, 64 bit), I read that WMDC is used in W7 instead of ActiveSync). So I executed the HSPL4 (phone conected) and wait 5 minutes, and it didn't find the USB conection of my phone with my pc :/
Anyone had this problem or know any alternative? :/
Thanks!
Done, I use the "NOTE: You can also install HARDSPL by entering Bootloader mode manually, then running the HSPL4.exe program once you see 'USB' at the bottom of the tri-colour screen.". I didn't saw it
Haha I was just about to say that. It's actually better if you run it straight from HSPL.
So are you all flashed now or what?
Skellyyy said:
Haha I was just about to say that. It's actually better if you run it straight from HSPL.
So are you all flashed now or what?
Click to expand...
Click to collapse
I just flashed it and now I have to install the Radio, but I have the same problem (in the steps it says that I need to be connected by activeSync)
I think I will try again from the Bootloader mode manually, what do you say?
Edit: In this post says that the radio have to be installed before the rom, but in this one it says the opposite.
(I'm a little lost )
Install everything from the bootloader. They;ll all flash correctly from there.
Install the radio before the ROM. Make sure you flash 2.15.50.14 then flash MAGLDR and flash away!
mm, I downloaded the radio 2.15.50.14 but when I execute the CustomRUU and the phone is conected in Bootloader mode it doesn't recognize the phone :S
I can't figure out any solution... what a thing...
PD: Now it shows SPL-3.03.HSP in the bootloader screen, so that's ok
Actually no that's the reason why its not okay. You flashed the wrong HSPL. Just go back to bootloader, open up HSPL4 and when you get to a drop down menu chose 2.08.HSPL from the menu. That's the one you need. Flash that, then reflash the radio and it will flash properly.
Sent from my HTC Vision using XDA App
i don't know
christian.patella said:
i don't know
Click to expand...
Click to collapse
Thank you for the useful post...
Sent from my HTC Vision using XDA App
Oh, I've just realized one thing.. In this post says:
★STEP 2★
Prepare your device
windows rom - windows rom has been linked with issues within the android builds so for the first time im going to compile a list of working roms here that have no issues within android
i have been using ChuckyROM GTX + CHT 1.8.5 - 23128 from the start of android development and have yet to have an issue below is a list of other roms and links that are working well with android :-
BARE BONES WM ROM FOR ANDROID BY NRGZ28
[ROM][WWE]★★★Astraios Roms★★★[REG/BUUF/GTX][23569][22nd July]
ELEGANCIA ROM Series™
ChuckyROM GTX + CHT 1.8.5 - 23128 ~ 2.10.1
¸¸.·´¯`·.¸¸.- Energy -.¸¸.·´¯ | 21911||23129 * Sense 2018
★★★ PLEASE LEAVE LINKS AND INFORM ME OF ANY ROMS YOU HAVE TRIED AND HAD NO ISSSUES ★★★
FOR INFORMATION ON HOW TO FLASH A ROM PLEASE GO TO FLASHING GUIDE.
That means I have to install another windows rom before the android one?
PD: When I installed the HSPL 3.03.0000 (by mistake) and then the 3.03.HSPL, in both cases it shows ''We hacked it!'', but I just install the 2.08.HSPL and it didn't show anything, it just said ''Succesfully done'', is that ok? . Edit: The phone displays the right version of SPL, i'll try with the custumRUU in a moment
I'm waiting for the answer I'm afraid of running the customruu without haven't changed the WM Rom (That step is't very clear for me )
If you have 2.08.HSPL on your phone all you need to do now is flash MAGLDR from the RUU. You don't need a custom WinMo ROM if you have the correct radio etc. as MAGLDR will over-write WinMo anyway.
So basically if your phone is saying 2.08.HSPL just go back to the bootloader and flash the MAGLDR RUU.
Help please
dami_rz said:
Help please
Click to expand...
Click to collapse
I have.

Loading Stock Rom

OK, so i am trying to load the stock rom back on my old HD2 to send back to t-mobile.
My phone has a broken flex cable going to the bottom buttons so i cannot hit the power button.
I downloaded the stock rom from t-mobile and have it both on sd card and on computer.
I can boot the phone to the point where it wants me to load the rom from SD card, i just cannot hit the power button to accept.
So i tried to do it from the computer. when i do, it just hangs at 8%.
Does anyone have any idea how I can put stock rom back on it?
Hold your volume down button down while you power,on your HD2. When you see the multicolor bootloader screen come up connect your USB cable to the HD2 and computer. Wait for the Serial in the white bar of bootloader to change to USB then run the RUU for the T-Mobile ROM. After you have flashed the ROM download HSPL 4 (linked in my sig) and run it but select SPL 3.03.0000 when it asks what version you want to flash. When you are done runningvthe HSPL utility boot into bootloader again to make sure you have SPL -3.03.0000. If you do and you should ypu are good for warranty.
T-Macgnolia said:
Hold your volume down button down while you power,on your HD2. When you see the multicolor bootloader screen come up connect your USB cable to the HD2 and computer. Wait for the Serial in the white bar of bootloader to change to USB then run the RUU for the T-Mobile ROM. After you have flashed the ROM download HSPL 4 (linked in my sig) and run it but select SPL 3.03.0000 when it asks what version you want to flash. When you are done runningvthe HSPL utility boot into bootloader again to make sure you have SPL -3.03.0000. If you do and you should ypu are good for warranty.
Click to expand...
Click to collapse
This is what i am doing, but it just hangs at 8% no matter what..
bnd10706 said:
This is what i am doing, but it just hangs at 8% no matter what..
Click to expand...
Click to collapse
Which one the ROM or HSPL?
T-Macgnolia said:
Which one the ROM or HSPL?
Click to expand...
Click to collapse
I am trying to load the rom first. I cant boot anything. it just says update failed when i try to boot
bnd10706 said:
I am trying to load the rom first. I cant boot anything. it just says update failed when i try to boot
Click to expand...
Click to collapse
Have you tried flashing via SD card? Here is a guide on how to do this.
Also I recomend you flash HSL first as it might help.
How do i flash HPSL first? I cant get the phone into sync with it?
bnd10706 said:
How do i flash HPSL first? I cant get the phone into sync with it?
Click to expand...
Click to collapse
You don't have to have to be synced through ActiveSync you use HTC USB sync. Click on my guide linked in my sig and follow the instructions there on how to flash HSPL you will see what I mean.
I reloaded HPSL 2.08 and then tried to install the stock firmware via usb and it still hangs at 8%. I wonder if i try to install a different version?
I cannot boot from SD since my bottom keys dont work. I cannot click the call button to accept.
bnd10706 said:
I reloaded HPSL 2.08 and then tried to install the stock firmware via usb and it still hangs at 8%. I wonder if i try to install a different version?
I cannot boot from SD since my bottom keys dont work. I cannot click the call button to accept.
Click to expand...
Click to collapse
Don't you understand? You don't need the stock ROM, once you have the stock SPL you -should- be fine. Go to the tri-Color screen and download HSPL4 on your PC and run it and choose 3.03.0000 (not HSPL) and click next and it should flash. If you've done that then you're ready to send it off for warranty. No need for stock ROM. Just change the HSPL to SPL again which TMagnolia and I just told you how to do.
Oh yeah and you can easily get to the tri-color by plugging the USB in and holding the Vol down button.
Skellyyy said:
Don't you understand? You don't need the stock ROM, once you have the stock SPL you -should- be fine. Go to the tri-Color screen and download HSPL4 on your PC and run it and choose 3.03.0000 (not HSPL) and click next and it should flash. If you've done that then you're ready to send it off for warranty. No need for stock ROM. Just change the HSPL to SPL again which TMagnolia and I just told you how to do.
Click to expand...
Click to collapse
Awesome! Thank you, no I was not understanding...very new at this. Thank you!
Quick question to add... there is no rom on there at all now....do i need to install one for warrenty?
The green square still says "upgrade rom code error" please try again
They won't power the phone on to see if theres a ROM and if they do it'll boot to SPL in which case I'd say they'd flash a stock ROM. What green box?
Skellyyy said:
Don't you understand? You don't need the stock ROM, once you have the stock SPL you -should- be fine. Go to the tri-Color screen and download HSPL4 on your PC and run it and choose 3.03.0000 (not HSPL) and click next and it should flash. If you've done that then you're ready to send it off for warranty. No need for stock ROM. Just change the HSPL to SPL again which TMagnolia and I just told you how to do.
Click to expand...
Click to collapse
I think they do not have a stock ROM on the HD2 and I was stupid and did not realize they probably already had HSPL on thier HD2. So they are not good to go for warranty just yet.
At the OP try right clicking on the RUU and select run as administrator. Also try different USB ports too that might help.
Skellyyy said:
They won't power the phone on to see if theres a ROM and if they do it'll boot to SPL in which case I'd say they'd flash a stock ROM. What green box?
Click to expand...
Click to collapse
When you get the red green blue and white screen, the green section.
in the green section it says
Upgrade ROM code error
Please try again
If you just let the phone boot up, lit says "software update faild. please try again" on a black screen with triagle with a ! in it.
T-Macgnolia said:
I think they do not have a stock ROM on the HD2 and I was stupid and did not realize they probably already had HSPL on thier HD2. So they are not good to go for warranty just yet.
At the OP try right clicking on the RUU and select run as administrator. Also try different USB ports too that might help.
Click to expand...
Click to collapse
I am using the exe file that i downloaded off tmobiles site...is that what i should be using to flash?
Skellyyy said:
They won't power the phone on to see if theres a ROM and if they do it'll boot to SPL in which case I'd say they'd flash a stock ROM. What green box?
Click to expand...
Click to collapse
I would still try to get the stock ROM on the HD2 before sending it in cause I can assure you if they will turn the phome on and check the ROM and SPL. and if they have SPL 3.03.000 and not SPL 2.10.0000 they will say why iscthat cause it looks like they were tring to update the phone and sould not have SPL 3.03.0000. Then they will probably say they either did not preform the flash correctly or had un approved software on the phone and will not pass it as warranty.
bnd10706 said:
I am using the exe file that i downloaded off tmobiles site...is that what i should be using to flash?
Click to expand...
Click to collapse
Yes that is the RUU, right click it and select run as adminastrator, Skellyyy is right too you need to use the HSPL 4 Utility to reset your HSPL to SPL 3.03.0000 if you get the ROM to flash

How do i downgrade spl 3.03 to 2.08?

Hello XDA.
as you can see iam new to the forum. and i have been trying some basic SD roms. and kinda found out that i realy liked the miui roms.
So i was about to try to install [ROM] HTC HD2 Leo MIUI.us Presents MIUI 1.7.15 Pure English [AOSP]
But then i noticed in the Unlocking HD2 step that my phone isnt unlocked and its also running spl 3.03.
So what i need help with is.
how do i downgrade to 2.08? (witch is needed in the next step) so i can continue the steps...
my phone is a european htc hd2 (norway) and is still running stock wm 6.5.
All help appreasiated.
Bootloader
Hspl4
Choose 2.08.hspl
thanks for the respond.
but would it be possible to be litle more detailed?
edit:
When you say bootloader i assume you refering to MAGLDR...
No,bootloader is bootloader,magldr is magldr. Plenty of stickies hand holding you through all this,and countless hundreds single threads explaining it.
Download HSPL 4. Connect phone to PC via ActiveSync. Run HSPL4 on PC and choose HSPL 2.08. Wait a few seconds. Should see 'We Hacked it!' on phone. You can now go ahead and (try) to install android following the other steps.
worked like a a sharm.
think i touth this was way more advanced so. my head wasnt sett it was this easy to understand. .
Nigeldg said:
Download HSPL 4. Connect phone to PC via ActiveSync. Run HSPL4 on PC and choose HSPL 2.08. Wait a few seconds. Should see 'We Hacked it!' on phone. You can now go ahead and (try) to install android following the other steps.
Click to expand...
Click to collapse
Mate. Can i do this same step for my T-Mobile UK HTC HD2. Sorry I am total noob. I got lost in Download HPSL 4 and ActiveSync.
forget activesync, ,
get hspl4 (see my sig)
put phone in bootloader
connect usb
when 'serial' becomes 'usb' run hspl4
choose desired target spl/hspl
go
done.
ReshamG said:
Mate. Can i do this same step for my T-Mobile UK HTC HD2. Sorry I am total noob. I got lost in Download HPSL 4 and ActiveSync.
Click to expand...
Click to collapse
Yeah as Samsamuel said, ActiveSync is not really necessary it's just easier for most people to understand.
Before doing this I would recommend updating your ROM to the latest official stock ROM 3.14 (go to the settings and then software info to see this if my memory serves me correctly, haven't used WinMo in ages ) as this will have the latest radio and will save you from having to reflash it later.
Download HSPL4 package (just see samsamuel's link in his sig), turn the phone off then boot into bootloader by holding power and volume down buttons. Connect phone to PC via USB, run the HSPL installer, select HSPL 2.08 (make sure it's HSPL, not SPL, SPL 2.08 won't do any damage, but it won't help either ) and viola, it will be installed after a few seconds
i have spl 1.67 how to upgrade or downgrade?

help me HTC HD2 shuck on "t mobile logo"

hello
my HTC HD2 shuck on t-mobile (stick together)pink logo
i try to hard reset/soft reset but not done.
so i try to update,then download
RUU_Leo_S_hTC_Asia_India_3.14.720.3_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
run that but at last when progress bar coming always stay on "0%"
i try with sd card too but stop on "loading...."
when it come in tri-colour there show this info..
Code:
PB81100 SS-B3
SPL-2.10.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
how to make properly update it?
where is wrong??
please need BIG help.
is this ROM for your Tmobile phone? I think this is for EU version.
Use this one and if it is works, press thanks button
http://forum.xda-developers.com/showthread.php?t=655653
different region ROM ?
Can you try to installing region specific ROM instead of Asia/India version. I faced similar problem last week as I bought phone in Europe (WWE version) but I was trying to update using Asia/India version.
Also, have you ever used HSPL on your phone?
Boot the device into boot loader and connect it to your computer via USB and flash HSPL 3.03 to it. Then run the RUU again.
T-Macgnolia said:
Boot the device into boot loader and connect it to your computer via USB and flash HSPL 3.03 to it. Then run the RUU again.
Click to expand...
Click to collapse
dear sir,
thanks for reply,
I do as u say.1st make HSPL 3.03 via HSPL4. now updating start but sometime 5%,
sometime 13%,sometime 32% go then error.
what is wrong?
Run RUU file with right click and choose "Run as Administrator",
or
some of your USB device like mouse may be deny your htc device
or
is your usb cable good, are you touching your usb cable during installation?
sattar_00977 said:
dear sir,
thanks for reply,
I do as u say.1st make HSPL 3.03 via HSPL4. now updating start but sometime 5%,
sometime 13%,sometime 32% go then error.
what is wrong?
Click to expand...
Click to collapse
As powerthink posted above me, right click on the RUU and run it as administrator. Also just keep trying it for a while and maybe it will finish the flash. If it just will not finish the flash and keeps giving you errors. Then you can try flashing from SD card, and if that does not work you can try a earlier ROM version.
T-Macgnolia said:
As powerthink posted above me, right click on the RUU and run it as administrator. Also just keep trying it for a while and maybe it will finish the flash. If it just will not finish the flash and keeps giving you errors. Then you can try flashing from SD card, and if that does not work you can try a earlier ROM version.
Click to expand...
Click to collapse
hello sir
i try via sdcard flashing.
I put (RUU_Leo_HTC_GER_1.66.407.1_Radio_15.32.50.07U_2.07.51.22_2_Signed_LEO_Ship)
update compate. but now no power on/no bootlodermode
how to recover?
sattar_00977 said:
hello sir
i try via sdcard flashing.
I put (RUU_Leo_HTC_GER_1.66.407.1_Radio_15.32.50.07U_2.07.51.22_2_Signed_LEO_Ship)
update compate. but now no power on/no bootlodermode
how to recover?
Click to expand...
Click to collapse
Please tell me you do not have a TMOUS HD2? If you do I am very sorry but you hard bricked your HD2. Do you see the 51 I highlighted in the radio version of the RUU you posted? You can not flash a radio with a 51 in it to a TMOUS or you will brick the device. I really wished you would have posted that before you flashed or at least clicked on my guide linked in my sig as I descuss this at the very top of my guide. I am truly sorry friend. The only thing you can do now is have the device JTAGed to fix it. If you want I can give you the contact info on someone that does this for around 40 USD plus shipping and handling.
Does your battery have charge? Did you charge it enough?
Try to use "Reset" button instead of "power" button and "Volume" button together.
powerofthink said:
Does your battery have charge? Did you charge it enough?
Try to use "Reset" button instead of "power" button and "Volume" button together.
Click to expand...
Click to collapse
Sorry powerthink, I hate it as much as anybody else. But it sounds like sattar_00977 has a TMOUS because no bootloader after a complete flash and the ROM had radio version 2.0 7.51.22_2 in it sounds like a bricked TMOUS to me.
powerofthink said:
Does your battery have charge? Did you charge it enough?
Try to use "Reset" button instead of "power" button and "Volume" button together.
Click to expand...
Click to collapse
yes sir battery is fully charged.
Try to use "Reset" button instead of "power" button and "Volume" button together
but not happeaning any thing.
How does one find if its a TMOUS mobile or a non-TMOUS mobile?
T-Macgnolia said:
Sorry powerthink, I hate it as much as anybody else. But it sounds like sattar_00977 has a TMOUS because no bootloader after a complete flash and the ROM had radio version 2.0 7.51.22_2 in it sounds like a bricked TMOUS to me.
Click to expand...
Click to collapse
you are right sir it has (bricked TMOUS). i repair it. repair done. now it show bootloder mode. now it show
PB81100 SS-B3
SPL-2.10.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
Click to expand...
Click to collapse
so please help me which rom is perfect ? if possible link too give.
thanks.
sattar_00977 said:
you are right sir it has (bricked TMOUS). i repair it. repair done. now it show bootloder mode. now it show
so please help me which rom is perfect ? if possible link too give.
thanks.
Click to expand...
Click to collapse
Well first off I am glad you got your device back up and going, but I am curious how you did this, I mean when you JTAG a HD2 it puts HSPL 2.08 on it. Then you can load a ROM to the device. But you say you have SPL-2.10.0000. Did you already flash something to the device after JTAG?
Either way please do not flash a ROM with a radio version that has 51 in it like the last ROM you flashed. Also do not flash a radio version that is below 2.08.50.?? because evfen though they have a 50 in them. The radio versions below 2.08.50.?? or actually 51 radios because they were used in the TMOUS test toms.
Flash the 3.14.1 ROM from this thread, but do not ever flash the 2.01 through 2.09 ROMs from that thread. Also only flash Windows Mobile ROMs from this section of the Windows Mobile development forum.
Did you try last ROM (3.14.1) at following link?
http://forum.xda-developers.com/showthread.php?t=655653
powerofthink said:
Did you try last ROM (3.14.1) at following link?
http://forum.xda-developers.com/showthread.php?t=655653
Click to expand...
Click to collapse
Thanks sir last ROM (3.14.1) upgrade sucessfully but set still hang on "stick together" pink logo, i resetting, hard reset but same.
how to recover?
i am afraid your phone was bricked. but still, I have a little hope
If you still have time and have patience;
Change your HSPL to 2.08.HSPL,
Choose one of them;
1. install this Android ROM which i give you now. It is not only EU version but also TMOUS version. You can use it.
http://forum.xda-developers.com/showthread.php?t=733649
2. You can use this ROM. it is Windows 6.5 ROM for TMOUS.
http://forum.xda-developers.com/showthread.php?t=654504
NOTE : And you have to apply which one you prefer to use, please read this.http://forum.xda-developers.com/showpost.php?p=27266966&postcount=4
powerofthink said:
i am afraid your phone was bricked. but still, I have a little hope
If you still have time and have patience;
Change your HSPL to 2.08.HSPL,
Choose one of them;
1. install this Android ROM which i give you now. It is not only EU version but also TMOUS version. You can use it.
http://forum.xda-developers.com/showthread.php?t=733649
2. You can use this ROM. it is Windows 6.5 ROM for TMOUS.
http://forum.xda-developers.com/showthread.php?t=654504
NOTE : And you have to apply which one you prefer to use, please read this.http://forum.xda-developers.com/showpost.php?p=27266966&postcount=4
Click to expand...
Click to collapse
tnx sir i download
Energy_3.15.2012.SensationXL.LITE.VERSION
but it is zip file how to flash it? via sd card?
i install energy rom sucess but again com NGR logo.
i think i confused so u give direct link of rom please?
-Format your sdcard like FAT32 as primary.
-Copy "Energy_3.15.2012.SensationXL.LITE.VERSION.zip" file into sdcard.
-insert it into your HTC device.
-(on the 3-color screen)Check your HSPL 2.08.HSPL.(not 2.08.0000)
-(on the 3-color screen)do task29.
-(on the 3-color screen)install Radio 2.15.50.14.
-(on the 3-color screen)install Magldr 1.13.
-(on the magldr) choose option 5. "USB Flash" and you will see "USB Flash....USB" when connected your HTC to your computer,
-For repartition (Cwm Recovery) on left side of HD2 Toolkit, choose 400MB=System Partition and Cache Size=45MB (because your phone TMOUS) and Flash it(with "repartition" button).
-After reboot, on the magldr choose "AD Recovery" and it will go into Recovery mod.
-Then select 'install zip from sd card' in the menu,
-Go down to 'choose zip from sdcard' and select your Energy..zip file and follow steps on your device screen.
-When it ask you which model do you have like TMOUS or EU, please choose TMOUS. (as I remember, "Yes-TMOUS, No-EU", you will see 2 option.
-and wait appr. 5 to 10 minutes.
-if you don't have any problem in your machine, it will install it and when it's complete you will choose "reboot your device"
-thats all..
http://d-h.st/C9XEnergy_3.15.2012.SensationXL.LITE.VERSION.zip
http://d-h.st/geXEnergy_3.15.2012.SensationXL.zip

Categories

Resources