Database Users

Stuck at bootscreen! (Solved)

9
Hey all,
A friend of mine tried to install android on his HD2.
After installing HSPL it worked fine.
But after flashing MAGLDR the phone gets stuck at the HTC bootscreen.
And I cant get the phone connected to activesync
What did I try:
1. Hard Reset
2. Using a stock rom RUU (ruu_signed.nbh)to flash like this:
a)Formatting the sd card to fat32(16GB)
b)Putting ruu_signed.nbh on the sd card and renaming it to leoimg.nbh.
(I tried the Unbranded and the NLD RUU)
c)Turning phone on with vol down.
After the thrid step (c) I get on a screen that says "Loading..." but after 30 minuts nothing happen.
Anyone! What do I need to do?
Greetz,
Michka
BTW i got my ruu_signed.nbh files from the %temp% folder of the RUU installer.exe
This is what he gets on the tripel color screen.
PB81100 HX-BC
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40

The SD card should be freshly formatted, FAT32 format.
It´s not easy to find out what went wrong with MAGLDR.
Did you use the latest version, 1.13?
What HSPL and what Radio ROM version were on the device?
And finally, do you still get into the bootloader screen (vol. down + power),
what does it say in there?

tictac0566 said:
The SD card should be freshly formatted, FAT32 format.
It´s not easy to find out what went wrong with MAGLDR.
Did you use the latest version, 1.13?
What HSPL and what Radio ROM version were on the device?
And finally, do you still get into the bootloader screen (vol. down + power),
what does it say in there?
Click to expand...
Click to collapse
Yes i used the latesd version o MAGLDR,
HSPL 3
Radio dont remember
Yes i can get in the bootloaderscreen.

Well, then please provide as much information as possible.
It´s really hard or even impossible to help without more information.
It´s a bit like: My car is broken. What should I do?
"A stock ROM" is very tight information...
For your reference, flashing through SD card deletes HSPL, that´s why I asked
what the bootscreen information says...

tictac0566 said:
Well, then please provide as much information as possible.
It´s really hard or even impossible to help without more information.
It´s a bit like: My car is broken. What should I do?
"A stock ROM" is very tight information...
For your reference, flashing through SD card deletes HSPL, that´s why I asked
what the bootscreen information says...
Click to expand...
Click to collapse
Oke if someone could help me I will provide some info tomorrow.
(I need to ask my friend cus i havent got the phone in my possesion)

This is what he gets on the tripel color screen.
PB81100 HX-BC
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
Sent from my HTC Wildfire using XDA App

Bump
Sent from my HTC Wildfire using XDA App

See, the information you posted is helpful indeed.
You still have SPL 2.08.0000 on your device instead of 2.08.HSPL. On the other hand, I still don´t know what your original ROM was.
Please try to re-install with HSPL3.exe, and please make sure to install the correct Radio ROM in case you don´t have it yet, should be 2.15.50.14.
Both items are required to run MAGLDR properly.
If your attempt to flash a stock ROM failed, then something else was wrong.

There are known problems flashing with 8GB, or greater, SD Cards.
Put the phone into Bootloader Mode and then connect to the PC.
Run HSPL3 and select 2.08.HSPL
Put the phone into Bootloader Mode and then connect to the PC.
Download and flash the RADIO 2.15.50.14.
Put the phone into Bootloader Mode and then connect to the PC.
Now you are ready to go through the MAGLDR instructions and NANDRIOD flashing.

fred_up said:
There are known problems flashing with 8GB, or greater, SD Cards.
Put the phone into Bootloader Mode and then connect to the PC.
Run HSPL3 and select 2.08.HSPL
Put the phone into Bootloader Mode and then connect to the PC.
Download and flash the RADIO 2.15.50.14.
Put the phone into Bootloader Mode and then connect to the PC.
Now you are ready to go through the MAGLDR instructions and NANDRIOD flashing.
Click to expand...
Click to collapse
Thanks for adding that hint, I keep forgetting this very fact.
I do have the 2GB card which came with the device ready for flashing purposes... it was even my Goldcard at very early stages.

Oke thx for the replies.
I will try it tonight!
Greetz,
Michka
Sent from my HTC Wildfire using XDA App

Thank you guys.
The problem was hspl.
Because of the sd card (i think) hspl wasnt flashed right. So i couldnt install a radio or get magldr working. Now i reinstalled hspl and i can do anything.
So what i did in short:
1. Reinstalled hspl 3.00 with a 2gb sd.
2. Flashed the right radio.
3. So now magldr was working
4. Flashed the nld stock rom(to be 100% sure everyting works).
5. Reflashed magldr 1.03 again.
6. Flashed an android disre hd rom (standard nand rom doesnt seem to work).
7. We are happy everything works.
Thx again!
Sent from my HTC Wildfire using XDA App

[Q] New in upgrade mobile, what do I do?

Hi all,
I'm brand new in the art of updating mobiles.
I would like to update my HD2 to andriod but have no idea of how I do it. I have looked at a lot of threads but it seems that I need ot know a lot about my phone before I can start!!
Can anyone help me how and where to start?! What do I need to install and how do I install it :/
My phone data:
OS version 5.2.2.1913 (21913.5.0.94)
Manila version 2.5.20181527.0
ROM version 3.14.403.2 (04666) DAN
ROM date 10/4/10
Radio version 2.15.50.14
Protocol version 15.42.50.11.U
When I press volume down and start my phone it say
PB81100 HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
Best regards,
Peter

Knowledge is power my friend and d answers u seek are but a click away...All u have 2 do is read, read n do more reading...follow all instructions written by devs to d letter as they were written for a reason...Wat reason?...
Avoiding errors or turning your beloved HD2 into an "Expensive Paper-Weight"....Getting android onto ur device is quite easy, u just have 2 put in d time 2 understand certain terms n how d needed softwares work...So summary?...Start reading from here. When u have properly familiarized urself with flashing then visit the HD2 android development section n check out several builds available...u must make a choice urself as we wouldn't know wat u lyk...so feel free 2 test as many as u can.
P.S. Its crucial u first perform a HSPL (2.08 HSPL) on ur fone before doing ANYTHING else.

The post above isn't really helpful. He's obviously read a lot already lol.
I know getting in to flashing and stuff on the HD2 is very confusing at the start, but once you learn it once you learn it forever.
Basically first off, you need to flash HSPL 2.08 to your phone. To do so download 'HSPL4' from these forums and flash that. Just search for it and you'll find it. It'll have instructions on how to install it on the thread which is very easy.
Just boot to SPL and connect to USB and run the .exe file inside of HSPL4 and choose 2.08.HSPL from the drop down menu.
After this you need to flash the newest radio which is 2.15.50.14. There's a sticky in all the HD2 development threads that have all the radio's. Just look in the WinMo or Android section and it'll be stickied. You basically then open the file you downloaded with the radio in it, boot to HSPL (you've just flashed HSPL over SPL) and run the RomUpdateUtility and just click on all the next and update buttons on the window that'll pop up and it will install. Obviously you need your USB cable plugged in for this too.
After that, you need to flash MAGLDR. I can't get links at the moment but you should easily be able to get a link to the MAGLDR thread and download it. After you've downloaded it to your PC, it's basically the exact same procedure as flashing a radio. Bootloader > USB connected to phone > open RomUpdateUtilty and follow instructions and flash. After this finishes installing you're basically done and all you need to do is flash your Android ROM. Just go in to the NAND Development section and chose a ROM to start from.
Another option is to flash Clockworkmod Recovery after MAGLDR.
You simply flash that by going in to MAGLDR (keep holding power/end key while phone is booting) and go to USB Flasher using your volume buttons then going in to it by the call button. Then opening the .DAF file on your PC and following the instructions and clicking next. Obviously again with your USB cable plugged in too. This is how you flash ROM's/Clockwork.
Any other problems I'd be more than happy to help with.
Just to mention too - the HD2 is very difficult to brick so don't worry about bricking your phone as I don't think there's actually a way to do it other than flashing the wrong radio if you have a TMoUS HD2 and you flash a .51 radio which you won't do as I've told you the correct radio to flash.

from the info he posted about his phone, it seems it already has the latest radio installed (2.15.50.14) I'm guessing that he's got a phone from somewhere in EU since the TMOUS came with the 2.08.50 radio, unless I'm mistaken, and there are some later models of the US hd2 that have the 2.15 radio, but anyways if the info is correct then he doesn't need to worry about the radio, he needs :
HSPL4> 2.08hspl http://forum.xda-developers.com/showpost.php?p=11499585&postcount=3
Task 29 http://forum.xda-developers.com/showthread.php?t=644781
MGLDR http://forum.xda-developers.com/showthread.php?t=893618
Clockworkmod Recovery http://forum.xda-developers.com/showthread.php?t=898913
any more info go here http://forum.xda-developers.com/showthread.php?t=905841
and his rom of choice. I'm sure with this info he can get to where he wants to go, good luck!

Woops my bad, didn't even read the OP info part. Well done for posting the links though as I can't at the moment.
Also about clockwork, make sure the you have the right clockwork partition for the ROM or else you'll get stuck on a boot-loop. You'll usually find the partition info in the ROM thread and then you just edit the flash.cfg file found in your clockwork folder using notepad.

Hi
Thanks a lot for all your help, it made it a lot easier for me to start )
I have now installed
HSPL4> 2.08hspl http://forum.xda-developers.com/show...85&postcount=3
I didnt do this (radio update, since as I understood I already had the right one!!??, Yes the phone is from Denmark)
Task 29 http://forum.xda-developers.com/showthread.php?t=644781
Then I downloaded MGLDR and run the ROMUpdateUtility
MGLDR http://forum.xda-developers.com/showthread.php?t=893618
BUT it say that it may take upto 10 minutes, it take below 1 minute for me... the statusbar at the host computer goes from 0 to 100% fast and the same on the phone and after that the phone restart and show "HTC" in green with white background... then it simply stops.......
What have I done wrong and how can I solve it?!
Thanks in advance for all your input.
Best regards,
Peter

PeterSvendsen said:
Hi
Thanks a lot for all your help, it made it a lot easier for me to start )
I have now installed
HSPL4> 2.08hspl http://forum.xda-developers.com/show...85&postcount=3
I didnt do this (radio update, since as I understood I already had the right one!!??, Yes the phone is from Denmark)
Task 29 http://forum.xda-developers.com/showthread.php?t=644781
Then I downloaded MGLDR and run the ROMUpdateUtility
MGLDR http://forum.xda-developers.com/showthread.php?t=893618
BUT it say that it may take upto 10 minutes, it take below 1 minute for me... the statusbar at the host computer goes from 0 to 100% fast and the same on the phone and after that the phone restart and show "HTC" in green with white background... then it simply stops.......
What have I done wrong and how can I solve it?!
Thanks in advance for all your input.
Best regards,
Peter
Click to expand...
Click to collapse
Sometime wrong radio can cause that issue.
Make sure that the radio is 2.15.xxx.xxx.
Now, you should go into bootloader and try to flash the radio, and then restart doing task 29, flashing MAGLDR.
If you succeed, your phone will automatically bring you into MAGLDR screen.
From there you can flash Android or WP7
Good luck

I now downloaded my "old" radio version 2.15.50.14
http://forum.xda-developers.com/showthread.php?t=611787
It seems to complete.. didnt jump from 0% to 100% in 1 sec..... so thats good
Then the task29 seems to work as well since my ROM is clean!!
BUT agian when I romupdate MGLDR it start and complete very fast... goes from 0 to 100% within a few sec...
http://forum.xda-developers.com/showthread.php?t=893618
and agian stops at the HTC startup screen.....

As extra information I can say that when I try to install MGLDR the RomUpdate state that the current image version is... blank
and that I can install Image Version 2.00.000.0
And then when I start it takes a few sec.....

What OS do you use on your PC? If it's Vista/Windows 7, you may need to run as administrator, if you haven't done so already
Sent from my HTC HD2 using XDA App

I'm using WinXP as OS

I'm using WindowsXP as OS.
I have not had any problem using the programs so far.. so I guess I have all the right rights!
UPDATE:
Can it be a problem with the SD card if there are no connection or a defect card?
I get exactly the same behavior if I remove the SD card from the phone!

PeterSvendsen said:
I'm using WindowsXP as OS.
I have not had any problem using the programs so far.. so I guess I have all the right rights!
UPDATE:
Can it be a problem with the SD card if there are no connection or a defect card?
I get exactly the same behavior if I remove the SD card from the phone!
Click to expand...
Click to collapse
Hmmm...You r flashing MAGLDR 1.13? Try flashing witout ur sd card & sim card present...if dat still doesn't work then try another pc, possibly one with Windows 7 (though it works on xp)...Task 29 always.

Loading Stock Rom

OK, so i am trying to load the stock rom back on my old HD2 to send back to t-mobile.
My phone has a broken flex cable going to the bottom buttons so i cannot hit the power button.
I downloaded the stock rom from t-mobile and have it both on sd card and on computer.
I can boot the phone to the point where it wants me to load the rom from SD card, i just cannot hit the power button to accept.
So i tried to do it from the computer. when i do, it just hangs at 8%.
Does anyone have any idea how I can put stock rom back on it?

Hold your volume down button down while you power,on your HD2. When you see the multicolor bootloader screen come up connect your USB cable to the HD2 and computer. Wait for the Serial in the white bar of bootloader to change to USB then run the RUU for the T-Mobile ROM. After you have flashed the ROM download HSPL 4 (linked in my sig) and run it but select SPL 3.03.0000 when it asks what version you want to flash. When you are done runningvthe HSPL utility boot into bootloader again to make sure you have SPL -3.03.0000. If you do and you should ypu are good for warranty.

T-Macgnolia said:
Hold your volume down button down while you power,on your HD2. When you see the multicolor bootloader screen come up connect your USB cable to the HD2 and computer. Wait for the Serial in the white bar of bootloader to change to USB then run the RUU for the T-Mobile ROM. After you have flashed the ROM download HSPL 4 (linked in my sig) and run it but select SPL 3.03.0000 when it asks what version you want to flash. When you are done runningvthe HSPL utility boot into bootloader again to make sure you have SPL -3.03.0000. If you do and you should ypu are good for warranty.
Click to expand...
Click to collapse
This is what i am doing, but it just hangs at 8% no matter what..

bnd10706 said:
This is what i am doing, but it just hangs at 8% no matter what..
Click to expand...
Click to collapse
Which one the ROM or HSPL?

T-Macgnolia said:
Which one the ROM or HSPL?
Click to expand...
Click to collapse
I am trying to load the rom first. I cant boot anything. it just says update failed when i try to boot

bnd10706 said:
I am trying to load the rom first. I cant boot anything. it just says update failed when i try to boot
Click to expand...
Click to collapse
Have you tried flashing via SD card? Here is a guide on how to do this.
Also I recomend you flash HSL first as it might help.

How do i flash HPSL first? I cant get the phone into sync with it?

bnd10706 said:
How do i flash HPSL first? I cant get the phone into sync with it?
Click to expand...
Click to collapse
You don't have to have to be synced through ActiveSync you use HTC USB sync. Click on my guide linked in my sig and follow the instructions there on how to flash HSPL you will see what I mean.

I reloaded HPSL 2.08 and then tried to install the stock firmware via usb and it still hangs at 8%. I wonder if i try to install a different version?
I cannot boot from SD since my bottom keys dont work. I cannot click the call button to accept.

bnd10706 said:
I reloaded HPSL 2.08 and then tried to install the stock firmware via usb and it still hangs at 8%. I wonder if i try to install a different version?
I cannot boot from SD since my bottom keys dont work. I cannot click the call button to accept.
Click to expand...
Click to collapse
Don't you understand? You don't need the stock ROM, once you have the stock SPL you -should- be fine. Go to the tri-Color screen and download HSPL4 on your PC and run it and choose 3.03.0000 (not HSPL) and click next and it should flash. If you've done that then you're ready to send it off for warranty. No need for stock ROM. Just change the HSPL to SPL again which TMagnolia and I just told you how to do.

Oh yeah and you can easily get to the tri-color by plugging the USB in and holding the Vol down button.

Skellyyy said:
Don't you understand? You don't need the stock ROM, once you have the stock SPL you -should- be fine. Go to the tri-Color screen and download HSPL4 on your PC and run it and choose 3.03.0000 (not HSPL) and click next and it should flash. If you've done that then you're ready to send it off for warranty. No need for stock ROM. Just change the HSPL to SPL again which TMagnolia and I just told you how to do.
Click to expand...
Click to collapse
Awesome! Thank you, no I was not understanding...very new at this. Thank you!

Quick question to add... there is no rom on there at all now....do i need to install one for warrenty?

The green square still says "upgrade rom code error" please try again

They won't power the phone on to see if theres a ROM and if they do it'll boot to SPL in which case I'd say they'd flash a stock ROM. What green box?

Skellyyy said:
Don't you understand? You don't need the stock ROM, once you have the stock SPL you -should- be fine. Go to the tri-Color screen and download HSPL4 on your PC and run it and choose 3.03.0000 (not HSPL) and click next and it should flash. If you've done that then you're ready to send it off for warranty. No need for stock ROM. Just change the HSPL to SPL again which TMagnolia and I just told you how to do.
Click to expand...
Click to collapse
I think they do not have a stock ROM on the HD2 and I was stupid and did not realize they probably already had HSPL on thier HD2. So they are not good to go for warranty just yet.
At the OP try right clicking on the RUU and select run as administrator. Also try different USB ports too that might help.

Skellyyy said:
They won't power the phone on to see if theres a ROM and if they do it'll boot to SPL in which case I'd say they'd flash a stock ROM. What green box?
Click to expand...
Click to collapse
When you get the red green blue and white screen, the green section.
in the green section it says
Upgrade ROM code error
Please try again
If you just let the phone boot up, lit says "software update faild. please try again" on a black screen with triagle with a ! in it.

T-Macgnolia said:
I think they do not have a stock ROM on the HD2 and I was stupid and did not realize they probably already had HSPL on thier HD2. So they are not good to go for warranty just yet.
At the OP try right clicking on the RUU and select run as administrator. Also try different USB ports too that might help.
Click to expand...
Click to collapse
I am using the exe file that i downloaded off tmobiles site...is that what i should be using to flash?

Skellyyy said:
They won't power the phone on to see if theres a ROM and if they do it'll boot to SPL in which case I'd say they'd flash a stock ROM. What green box?
Click to expand...
Click to collapse
I would still try to get the stock ROM on the HD2 before sending it in cause I can assure you if they will turn the phome on and check the ROM and SPL. and if they have SPL 3.03.000 and not SPL 2.10.0000 they will say why iscthat cause it looks like they were tring to update the phone and sould not have SPL 3.03.0000. Then they will probably say they either did not preform the flash correctly or had un approved software on the phone and will not pass it as warranty.

bnd10706 said:
I am using the exe file that i downloaded off tmobiles site...is that what i should be using to flash?
Click to expand...
Click to collapse
Yes that is the RUU, right click it and select run as adminastrator, Skellyyy is right too you need to use the HSPL 4 Utility to reset your HSPL to SPL 3.03.0000 if you get the ROM to flash

[Q] HELP: Have I bricked my HD2 by installing MAGLDR1.13?

Hi everyone! After checking the forum on possible quirks that can be encountered when installing MAGLDR I hope someone can help me with the following:
I am trying to install Android on the HD2 via full-NAND-flash (i.e. directly via USB without SD card). I read tons of webpages and I believe I understood the necessary steps. Check the SPL; Install Hspl; Install MAGLDR; etc.
I tried to install MAGLDR 1.13 and everything went nice and quick: 100% complete on the phone; 100% complete on the PC; click on finish; phone reboot .......... and now the HD2 does not go past the green-on-white HTC splash screen. No boot.
I can still acess the colour-striped bootloader, which reacts if I connect the USB cable. No more.
What have I done wrong? Can it be recovered?
Thanks in advance for any suggestion.

You need to do a bit more reading (it's fundamental). Flashing MAGLDR is only the first step in getting Android on NAND. Next, you'll need to flash CWM and if you're going to install Android, you are going to have to have an SD card.
It's clear you read enough to get as far as you have. I suggest doing a bit more.
Start here:
http://forum.xda-developers.com/showthread.php?t=905841

Thanks but I don't think I can do much more at this point. The phone seems to be stuck (see my initial post). Cheers,

Did you try holding the Red power button down while the phone was powering up? That should take you into the Magldr menu.
Also, since you say you can get into the bootloader, have you tried reflashing Magldr?

Yes, I did. However, in the flash window, where you should see you are going from ROM version X to ROM version Y, this information does not show. The flash process seems to go through normally but then the situation is the same one.
The bootloader I can access is the normal one, with the red-green-blue stripes: it shows:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x30
On the bottom it reads "serial" and if I connect the USB cable it changes to "USB".

Do a task 29.
Flash radio 2.15
reflash magldr
Hope this helps

yz.hd said:
Flash radio 2.15
Click to expand...
Click to collapse
I think this is the case sensitive for the OP explained symptoms.
Flash 2.15 or any Radio Rom that supports 576MB.

I have used Task29+radio 2.15.50.14, the doloop file repackaged by shadrac.....
So in principle the radio should be the correct one.
Shall I try with the separate flashes? Would you please let me have the links to download them?
(beginning to despair.....)
Thanks

Use HD2 Toolkit to re-flash MAGLDR 1.13... easiest and most comprehensive tools.. If u still stuck, re-install WM ROM (better custom ROM since u want to install AD NAND) this w keep ur HSPL. Once u are back to WM, repeat the whole cycle use the kit (pls confirm ur Radio 2.xx.50.xx (above 2.07.50.xx) and not the .51.
gd luck

Norton 360 doesn't like the HD2 tkit...
Any idea why Norton 360 discards the download telling me the HD2 Toolkit is a threat? That's odd...... the download link comes from this very site.
Anyone else with the same experience? Cheers!

[Q] Hd2 flashing problem

Hello everyone, I was trying to install new rom by using hd2 toolkit, first I did a task29 then I flashed radio. I mixed the steps and installed hspl, so after that I am not able to install anythink on my phone. First I tried installing Magdlr but it wouldn't passed 0%, then I tried task29 again and 0% again. Then I think the problem would be hd2 toolkit but no, I tried task29 standalone and no work, flashing a radio rom and no work. What can I do now? Thanks in advance..

ejjjjj said:
Hello everyone, I was trying to install new rom by using hd2 toolkit, first I did a task29 then I flashed radio. I mixed the steps and installed hspl, so after that I am not able to install anythink on my phone. First I tried installing Magdlr but it wouldn't passed 0%, then I tried task29 again and 0% again. Then I think the problem would be hd2 toolkit but no, I tried task29 standalone and no work, flashing a radio rom and no work. What can I do now? Thanks in advance..
Click to expand...
Click to collapse
Don't you read things carefully before doing something like this? If you had another phone, there's a chance you could have bricked it by doing something stupid like that.
Are you able to enter the bootloader? What SPL version does it show there? Have you tried flashing a stock ROM via the SD card?

First task29 was completed, then radio rom installed, and then hspl. All done by hd2 toolkit. After that I couldn't able to flash anythink like rom, task29 or else. So my phone only enters when i open it with volume button, else it only displays htc logo.
PB81100 SS-BC
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50

I even tried installing stock rom but still no good! It stucks at loading... screen, help me please!!

hi, check the link Below, does it show the same SPL?

nope, mine is SPL-2.08.0000, but I can change it with hspl4, but can't downgrade it!

ejjjjj said:
First task29 was completed, then radio rom installed, and then hspl. All done by hd2 toolkit. After that I couldn't able to flash anythink like rom, task29 or else. So my phone only enters when i open it with volume button, else it only displays htc logo.
PB81100 SS-BC
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
Click to expand...
Click to collapse
U mixed up the sequence mate, the guide says that 1st install HSPL then Task29 then Radio.
Did u still have connection between your phone and computer?
if not try hit reset button while holding down the volume key.

yep, i mixed it. i can reset it but without any rom update or any update (it won't pass 0%) it has no meaning to reset the phone. I have connection between computer via usb in bootloader mode only!

If u can connect the phone to your computer via boot loader that's a good new's mate. There's still hope to fix your phone.
So u currently has SPL 2.08 right?
and please check if u has radio ver 2.15.50.14?
if u has both of this and u still cannot install MAGDLR.
I used to has this problem. After i decided to switch to cLK it Fixed everything.
may be u should try too .
U can do it via HD2tool kit. by connect phone to your computer under bootloader mode (the red green white blue screen)
** Dont' for get to chosing cLK partition that's match your ROM requirement **
after install cLK then install Recovery then Flash the ROM.

thamlim said:
If u can connect the phone to your computer via boot loader that's a good new's mate. There's still hope to fix your phone.
So u currently has SPL 2.08 right?
and please check if u has radio ver 2.15.50.14?
if u has both of this and u still cannot install MAGDLR.
I used to has this problem. After i decided to switch to cLK it Fixed everything.
may be u should try too .
U can do it via HD2tool kit. by connect phone to your computer under bootloader mode (the red green white blue screen)
** Dont' for get to chosing cLK partition that's match your ROM requirement **
after install cLK then install Recovery then Flash the ROM.
Click to expand...
Click to collapse
Please, if you don't know exactly what you're talking about don't give out incorrect information. It is NOT possible to install cLK without HSPL, and thus the Task29 won't work either.
@OP, have you tried installing a stock ROM from the SD card? I'm not sure exactly how to do this (see, not giving incorrect info ) but if I'm not mistaken the procedure is to rename the stock ROM to a .zip extension, unzip it, copy RUU_signed.nbh to the SD card and rename it to LEOIMG.nbh, then enter the bootloader and follow the onscreen instructions. However, please check somewhere else that what I've said is correct as well. From here, you can just flash HSPL then MAGLDR, CWM and a zip ROM.

Problem solved, thanks for your answers!