Database Users

[TUT]MAGLDR Help[TUT]

Okay, everyone having problems seems to be steming from the same issues. One of the biggest seems to be: not reading. I read through about 22 pages, and kept seeing the same questions, most that had been answered.
Before you do anything, boot up winmo. Make sure you are at 2.80 HSPL. If you are not, download and flash it. Next make sure the winmo rom you have supports the 576mb rom. Most wont say if they do. If you arent 100% sure, search for one and flash it. I was using a dexter build, and everything worked flawless for me.
Once everything is in place, load up the winmo rom, and connect the phone to your cpu and activate winmo sync. After downloading MAGLDR to your cpu desktop, make sure the phone is still connected and in sync mode. Run DAF.exe. Let the program run through. After successful install, it will reboot into MAGLDR.
The volume rocker is up/down. Send/Green=Select/Enter. Home=Back. To load up your old android sd build go to settings and tell MAGLDR where the build is located. Note: There is an issue with loading sd builds, so most will not run correctly, if at all.
Now its time to install an Android NAND build. I used DFT's stock android build. Download it. Disconnect phone from cpu. Run the #4 option in MAGLDR by using the volume key and send/green. Run the rom update utility on the pc. When its says searching for usb, plug in the phone, and installation should continue. When its done, it should reboot and load into NAND Android.
If anything fails, start from square one. Install a stock shipped winmo rom. This will overwrite nand and HSPL. So your old NAND Android rom will be replaced, as well as your old HSPL. Re-flash the HSPL3 and continue.
Things to take note of: MAGLDR installs after the second nand check. Meaning you can change the first splash screen, not the others. I'm on US TMO HTC HD2 1024, and everything works perfectly. If you have robot voice, activate and deavtivate speaker phone, it should work. If not, reboot phone, and let it sit for about 10 minutes and it should work fine. AFter installation to retuen to MAGLDR hold the power button when turning the device on. Most importantly: READ. People arent answering your questions because they have probably already been asked and answered multiple times.
Also, see MAGLDR.nbh's posts (http://forum.xda-developers.com/showpost.php?p=5848003&postcount=19) about MTTY and task29. It seems to have helped alot of people having more cpu os dependant issues.

This wont help people with the stuck on go go go problem.
I fix however is being worked on.

bazgee said:
This wont help people with the stuck on go go go problem.
I fix however is being worked on.
Click to expand...
Click to collapse
Depends on which go go go problem it is. And if you follow the steps correctly, it should. But it should help alot of the people who have no idea where to start.

lamario said:
Before you do anything, boot up winmo. Make sure you are at 2.80 HSPL. If you are not, download and flash it.
Click to expand...
Click to collapse
I understand you're trying to help people, but at least try not to feed them wrong information with typos and what not.
2.08 HSPL, not 2.80.
You're going to have new flashers pulling out their hair looking for a non existent HSPL.

lamario said:
Once everything is in place, load up the winmo rom, and connect the phone to your cpu and activate winmo sync. After downloading MAGLDR to your cpu desktop, make sure the phone is still connected and in sync mode. Run DAF.exe. Let the program run through. After successful install, it will reboot into MAGLDR.
Click to expand...
Click to collapse
not daf.exe... but ROMUpdateUtility.exe
And there are some issues to fix... the bootloop... for example!

My HD2 won't boot after installing MAGLDR, what should I do ? It's stuck at boot screen.

magldr.nbh said:
battery out.
back in.
hold down volume down and power button (red/end/power).
release power.
connect to computer in tri-colour hsplCOTULLA bootloader screen/mode.
use mtty drivers just like task 29 with signature enforcement off (see mtty thread etc etc etc).
do task 29 here first (see mtty thread also).
--- then once clean ---
run romupdateutility from magldr archive whilst in tri-color screen (as if you skipped task 29)...
re-flash magldr.
goto usb-flasher in magldr menu.
connect usb.
run DAF.EXE.
Click to expand...
Click to collapse
what can i do about the Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (723)?

lamario said:
Okay, everyone having problems seems to be steming from the same issues. One of the biggest seems to be: not reading. I read through about 22 pages, and kept seeing the same questions, most that had been answered.
Before you do anything, boot up winmo. Make sure you are at 2.80 HSPL. If you are not, download and flash it. Next make sure the winmo rom you have supports the 576mb rom. Most wont say if they do. If you arent 100% sure, search for one and flash it. I was using a dexter build, and everything worked flawless for me.
Once everything is in place, load up the winmo rom, and connect the phone to your cpu and activate winmo sync. After downloading MAGLDR to your cpu desktop, make sure the phone is still connected and in sync mode. Run DAF.exe. Let the program run through. After successful install, it will reboot into MAGLDR.
The volume rocker is up/down. Send/Green=Select/Enter. Home=Back. To load up your old android sd build go to settings and tell MAGLDR where the build is located. Note: There is an issue with loading sd builds, so most will not run correctly, if at all.
Now its time to install an Android NAND build. I used DFT's stock android build. Download it. Disconnect phone from cpu. Run the #4 option in MAGLDR by using the volume key and send/green. Run the rom update utility on the pc. When its says searching for usb, plug in the phone, and installation should continue. When its done, it should reboot and load into NAND Android.
If anything fails, start from square one. Install a stock shipped winmo rom. This will overwrite nand and HSPL. So your old NAND Android rom will be replaced, as well as your old HSPL. Re-flash the HSPL3 and continue.
Things to take note of: MAGLDR installs after the second nand check. Meaning you can change the first splash screen, not the others. I'm on US TMO HTC HD2 1024, and everything works perfectly. If you have robot voice, activate and deavtivate speaker phone, it should work. If not, reboot phone, and let it sit for about 10 minutes and it should work fine. AFter installation to retuen to MAGLDR hold the power button when turning the device on. Most importantly: READ. People arent answering your questions because they have probably already been asked and answered multiple times.
Also, see MAGLDR.nbh's posts (http://forum.xda-developers.com/showpost.php?p=5848003&postcount=19) about MTTY and task29. It seems to have helped alot of people having more cpu os dependant issues.
Click to expand...
Click to collapse
Make sure that you run all programs on CPU as "administrator".
Sent from my HTC HD2 using XDA App

Installed and running perfectly. Thanks a lot. My phone feels like it was always meant to be an Android phone, a high end one at that.

magldr.nbh said:
NO. He is correct.
you do ruu to do magldr after/via hspl.
then sync with magldr and DAF.EXE
Thanks senior.
Click to expand...
Click to collapse
Sorry Member... but the "TUT" is incorrect... He didn't say to do run magldr... sorry... but if he try to help is correct, but also he need to say step by step...

sorry off topic but when i go to boot from sd android for ps3 jb it boots up but screen does not respond plz help

Hi, my HD2 doesn't boot to MAGLDR menu. I have tried task 29 and installing MAGLDR 1.0/ 1.1. After installing MAGLDR my phone reboots to "O2 Welcome" screen (the first screen i see on my phone after reboot) had stucks there. I have HSPL 2.08 install and can install cooked roms without any issues.
I am on O2 UK.
Many Thanks.

USB init failed Info: .\RSPL\RSPL.cpp (723)
Hi gang,
I keep on receiving this inane error message: USB init failed
Info: .\RSPL\RSPL.cpp (723).
I have downloaded and loaded hspl3, magldr 1.11 and dft android.
I have done these 3 steps to no avail.
1. hspl3
2. magldr
3. dft android
I'm not desperate by any means -- more so curious and I favor Android over Win Mo.
What are my odds of someone composing a thorough walkthrough? I figure i'm missing something or doing something out of step.
Please assist XDA community. =)

sameog said:
Hi gang,
I keep on receiving this inane error message: USB init failed
Info: .\RSPL\RSPL.cpp (723).
I have downloaded and loaded hspl3, magldr 1.11 and dft android.
I have done these 3 steps to no avail.
1. hspl3
2. magldr
3. dft android
I'm not desperate by any means -- more so curious and I favor Android over Win Mo.
What are my odds of someone composing a thorough walkthrough? I figure i'm missing something or doing something out of step.
Please assist XDA community. =)
Click to expand...
Click to collapse
Are you running xp? Go to Activesync and uncheck "allow usb connections". Reconnect phone, run daf.exe as administrator.

ViK210 said:
Hi, my HD2 doesn't boot to MAGLDR menu. I have tried task 29 and installing MAGLDR 1.0/ 1.1. After installing MAGLDR my phone reboots to "O2 Welcome" screen (the first screen i see on my phone after reboot) had stucks there. I have HSPL 2.08 install and can install cooked roms without any issues.
I am on O2 UK.
Many Thanks.
Click to expand...
Click to collapse
Its working now. I have updated the radio to 2.15.50.14 and everything is good. Its a must have ROM. Thanks everyone.

caedanne said:
Sorry Member... but the "TUT" is incorrect... He didn't say to do run magldr... sorry... but if he try to help is correct, but also he need to say step by step...
Click to expand...
Click to collapse
If I'm doing it wrong, then do it right yourself. Make a tutorial and put it up. It will phase mine out. I never said it was step by step, I just wanted to post something to help the people who were having problems, if you arent having problems why is my short tutorial giving you such grief?
jpack1983 said:
sorry off topic but when i go to boot from sd android for ps3 jb it boots up but screen does not respond plz help
Click to expand...
Click to collapse
I havent had much luck with booting sd builds, sorry I couldnt be of more assistance.
sameog said:
Hi gang,
I keep on receiving this inane error message: USB init failed
Info: .\RSPL\RSPL.cpp (723).
I have downloaded and loaded hspl3, magldr 1.11 and dft android.
I have done these 3 steps to no avail.
1. hspl3
2. magldr
3. dft android
I'm not desperate by any means -- more so curious and I favor Android over Win Mo.
What are my odds of someone composing a thorough walkthrough? I figure i'm missing something or doing something out of step.
Please assist XDA community. =)
Click to expand...
Click to collapse
Start everything from begining and try again. Flash stock shipped winmo rom to revert phone, then upgrade to hspl3 then continue through.

[Q] HELP: Have I bricked my HD2 by installing MAGLDR1.13?

Hi everyone! After checking the forum on possible quirks that can be encountered when installing MAGLDR I hope someone can help me with the following:
I am trying to install Android on the HD2 via full-NAND-flash (i.e. directly via USB without SD card). I read tons of webpages and I believe I understood the necessary steps. Check the SPL; Install Hspl; Install MAGLDR; etc.
I tried to install MAGLDR 1.13 and everything went nice and quick: 100% complete on the phone; 100% complete on the PC; click on finish; phone reboot .......... and now the HD2 does not go past the green-on-white HTC splash screen. No boot.
I can still acess the colour-striped bootloader, which reacts if I connect the USB cable. No more.
What have I done wrong? Can it be recovered?
Thanks in advance for any suggestion.

You need to do a bit more reading (it's fundamental). Flashing MAGLDR is only the first step in getting Android on NAND. Next, you'll need to flash CWM and if you're going to install Android, you are going to have to have an SD card.
It's clear you read enough to get as far as you have. I suggest doing a bit more.
Start here:
http://forum.xda-developers.com/showthread.php?t=905841

Thanks but I don't think I can do much more at this point. The phone seems to be stuck (see my initial post). Cheers,

Did you try holding the Red power button down while the phone was powering up? That should take you into the Magldr menu.
Also, since you say you can get into the bootloader, have you tried reflashing Magldr?

Yes, I did. However, in the flash window, where you should see you are going from ROM version X to ROM version Y, this information does not show. The flash process seems to go through normally but then the situation is the same one.
The bootloader I can access is the normal one, with the red-green-blue stripes: it shows:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x30
On the bottom it reads "serial" and if I connect the USB cable it changes to "USB".

Do a task 29.
Flash radio 2.15
reflash magldr
Hope this helps

yz.hd said:
Flash radio 2.15
Click to expand...
Click to collapse
I think this is the case sensitive for the OP explained symptoms.
Flash 2.15 or any Radio Rom that supports 576MB.

I have used Task29+radio 2.15.50.14, the doloop file repackaged by shadrac.....
So in principle the radio should be the correct one.
Shall I try with the separate flashes? Would you please let me have the links to download them?
(beginning to despair.....)
Thanks

Use HD2 Toolkit to re-flash MAGLDR 1.13... easiest and most comprehensive tools.. If u still stuck, re-install WM ROM (better custom ROM since u want to install AD NAND) this w keep ur HSPL. Once u are back to WM, repeat the whole cycle use the kit (pls confirm ur Radio 2.xx.50.xx (above 2.07.50.xx) and not the .51.
gd luck

Norton 360 doesn't like the HD2 tkit...
Any idea why Norton 360 discards the download telling me the HD2 Toolkit is a threat? That's odd...... the download link comes from this very site.
Anyone else with the same experience? Cheers!

[Q] Flashing Problem

Hi all,
I would like to ask someone who are willing to lend me a hand.
Here comes the problem:
1. I wanna flash a NAND Android into my HD2 (not Tmous)
2. I have already flashed with HSPL2 with selection of 2.08 HSPL.
3. It went through to Windows Mobile again, nothing goes wrong untill when I am trying to flash with Magldr Bootloader with ROM Update Utility.
4. It went through again, after that the phone reboot itself and it should be displaying Magldr bootloader instead of HTC green logo stuck at the WHITE SCREEN.
5. I've tried several ways to solve it including soft-reset but still nothing happen with the same problem which is the green HTC logo stuck at the white screen.
6. Even Hard-reset with factory default reset I have tried, the process went through, but still the same problem again (YOU GUYS KNOW WHAT I MEANT).
7. So, I tried another LeoAdvanceRUU.exe which @HD2Owner had posted few months ago, the flashing process worked through but it stucked at the 0% with HTC logo at BLACK screen.
8. I kept on trying with another ROM or Radio Flashing again, again and again and it is still stucked at 0% !!! (GOSH !! I'm going to be crazy)
I really hope someone can help me out of this as I am very appreciate to those who are willing to help me. I need the phone to deal with my daily usage, please the 'PRO's out there.. ><
Thanks in advance.
P/S: The Tri-Color mode showed PB8100 - SS-BC

Did bootloader show 'SPL2.08HSPL' (or something along those lines)?

Nigeldg said:
Did bootloader show 'SPL2.08HSPL' (or something along those lines)?
Click to expand...
Click to collapse
Yes !! It does showed..coz its already HSPL-ed..but i stil duno what is happening..

you havent yet flashed a correct radio. Non tmous radios (..51.. radios) wont allow magldr to start
enter bootloader
flash 2.15.50 radio
magldr will now start

I dont drink either LOL

samsamuel said:
you havent yet flashed a correct radio. Non tmous radios (..51.. radios) wont allow magldr to start
enter bootloader
flash 2.15.50 radio
magldr will now start
Click to expand...
Click to collapse
erm, I also tried to Flash the Radio ROM, but it will stucked at HTC logo with Black Screen and also 0% wont move either..

In that case double check the spl version in bootloader. Quite often people flash "2.08.0000" by mistake instead of "2.08.hspl"
(You did instal hspl before trying the radio, right? Radios news hspl too)

samsamuel said:
In that case double check the spl version in bootloader. Quite often people flash "2.08.0000" by mistake instead of "2.08.hspl"
(You did instal hspl before trying the radio, right? Radios news hspl too)
Click to expand...
Click to collapse
yea i did install the HSPL before flashing the radio and it is done with 2.08 HSPL
but what do u mean by Radios news HSPL?
when I am flashing the radio in the bootloader, I used the common flashing technique which is using the CustomRUU with the RUU_Signed.nbh file which contains Radio 2.14.50 and then the only the problem came out.
by means every ROM that I am trying to flash, It will still stuck at 0% Black Screen with HTC logo..

oops, radios NEED hspl , lol, darned predictive txt!
ok, so sounds more like usb timeout,
enter bootloader, connect usb, count to 5, run customruu.
If that still wont work, you can flash radios from sd, just like roms. Put teh ruu_signed.nbh onto sd card, renamed leoimg.nbh, reboot into bootloader, phone will see the .nbh and flash it.

samsamuel said:
oops, radios NEED hspl , lol, darned predictive txt!
ok, so sounds more like usb timeout,
enter bootloader, connect usb, count to 5, run customruu.
If that still wont work, you can flash radios from sd, just like roms. Put teh ruu_signed.nbh onto sd card, renamed leoimg.nbh, reboot into bootloader, phone will see the .nbh and flash it.
Click to expand...
Click to collapse
erm, is the flashing will do it automatically itself ?? because I am still not able to boot into whatever OS yet. And do i need to connect the USB when the leoimg.nbh flashing if its working itself ??

no, no usb needed, put the leoimg on the sd card, card into phone, power on phone holding voldown, bootloader finds the leoimg on the card and starts the flashing process.

eXcMichael said:
erm, is the flashing will do it automatically itself ?? because I am still not able to boot into whatever OS yet. And do i need to connect the USB when the leoimg.nbh flashing if its working itself ??
Click to expand...
Click to collapse
OK THAT'S WORKING @samsamuel !!!!!
THANKS ALOT !!!
I also assume the Radio was not flashed but i just cannot find a way to do the flash, and my troubleshooting was correct.
THANKS ALOT especially @samsauel and other devs' assistance. Highly Appreciate for what you guys contributed.. really THANK YOU, ITS NOW RUNNING Hyperdroid GBX ~
Thread can be closed and for further reference.

Look for HD2 nand toolkit 4.1 on XDA developers
It's a all in one utility hand HD2.
You can also try the we site addictive tips.com , they step by step tutorials.

[Q] HTC HD2 bricked, can load bootloader cant install any ROM

HI everyone,
This is the first time for me posting a thread here...thanks in advance.
Well I have a HTC HD2 that is a friends of mines. He was trying to change the radio so it could work in another country and managed to brick the phone. He got tired of trying to fix the phone so he gave it to me. I have tried fixing it with a tool kit I downloaded in another thread here. I managed to get it to boot butt it wouldn't get past T-Mobile screen...I kept on messing with it trying to install a ROM and different radios but non will work and wont turn on anymore but still is able to be recognize but PC(not mobile media center) and the last thing I did was task29. It stopped at 99%...still can load bootloader 3 colors but having a harder time getting the phone recognize by PC. Can anyone help me before I get into a deeper hole? If your need any more detail please ask me...btw the phone is running SPL- 3.03 HSPL in boot loader.

to the rescue !!
Jaimelebrone said:
HI everyone,
This is the first time for me posting a thread here...thanks in advance.
Well I have a HTC HD2 that is a friends of mines. He was trying to change the radio so it could work in another country and managed to brick the phone. He got tired of trying to fix the phone so he gave it to me. I have tried fixing it with a tool kit I downloaded in another thread here. I managed to get it to boot butt it wouldn't get past T-Mobile screen...I kept on messing with it trying to install a ROM and different radios but non will work and wont turn on anymore but still is able to be recognize but PC(not mobile media center) and the last thing I did was tasIt29. It stopped at 99%...still can load bootloader 3 colors but having a harder time getting the phone recognize by PC. Can anyone help me before I get into a deeper hole? If your need any more detail please ask me...btw the phone is running SPL- 3.03 HSPL in boot loader.
Click to expand...
Click to collapse
your friend shouldnt have flashed the radio without proper info !!
radio is the only thing which bricks the device !!!
dont worry we'll try to sort something out !!
firstly start with flashing a proper radio !!
http://forum.xda-developers.com/showthread.php?t=611787
download the radio 2.15.50.14 from this thread and flash it !!
NOTE : if you cant flash radio from ur pc, via nbh installer or the toolkit, you can flash it from a memory card !!
just format a normal memory card, put the radio on the card, rename the radio file to LEOIMG.nbh and get to the bootloader screen !!
follow the instructions from there and flash the radio !!
secondly if you want android or wp7-7.5 on ur device !! hspl 3.03 wont work !!
so install hspl 2.08 for that !!
for winmo6.5 3.03 is ok !!
do a task 29 once and flash any rom or magldr(for android or wp7-7.5)!!
good luck .....

thanks for quick reply
I am trying to do what you instructed me.

Didn't work
I tried it on the PC and it sadly stopped @ 96%, now it wont turn on volume down+power. Battery was charged and i didn't turn off. It displayed error 262. as soon as I can I will try it on sd card. Thanks though.

I was not able to install the radio but did in fact get to task29 successfully and MAGLDR Version-1.13. Now my phone is stuck in the Stick together screen. Can anyone help me from here what should I do. thanks I will be waiting for a responce.

Do you still need help cos its really easy to unbrick your phone and I say this because once I flashed 5 different roms in 2 hours or less and my phone wouldn't even turn on and when it did it would get stuck on the tmObile splash screen and restart but I fixed it and now I'm running the best Rom out there lol... reply to this thread and I'll tell you what to do
Sent from my HTC HD2 using xda premium

The thing is that I can't get any ROM's to finish installing...in the SD card the power button does not work...and in the computer the fartest I gotten was 99% but always stops and gives me error ussualy Error 262. Ireally don't know what to do. MY friend said he took it to an Asian Guy...I noticed that the battery S/N does not match the phone...can this have an effect...I haven't been able to flash any ROMS successfully not even the debranded stock. I flashed several phones and installed many different custom firmwares but this phone has been a real challenge...I'm over 2 weeks in...Thanks for the help thus far you guys are the best...

leoimg.nbh won't start to install
Hi everyone,
I have a severe problem with my HTC HD2 after installing a NAND version of android which did not work very well, than wanting to reinstall winmob 6.5 (vodafone) it startet "loading" the leoimg.nbh from the SD-card, but than stayed in this status neverending. So I interrupted (was that the mistake?? :-( }. Now I'm able to start MAGLDR 1.13, am also able to install another NAND version, but with every version I get the message: problem with android.xxx and so on.
I can start the bootloader modus (SPL-2.08.HSPL 8G XE), also connect by USB, but if I try to reload any leoimg.nbh from SD card - it does nothing, just stays in the bootloader modus.
Did I destroy any hardware by interrupting the non functioning "loading"?
Please help, if you can, what I could do now to get a functioning NAND android again!
Many thanks in advance!!!

freak just try the task 29 and u might return everything to normal condition
and for future never interrupt the installation process as u can brick ur device
for the main topic, i can say that ur device is fully bricked and the only way is taking it to the service center or try flashing directly into the hardware, but thats dangerous and requires professional skills

Plz help!
bigtobitobs said:
Do you still need help cos its really easy to unbrick your phone and I say this because once I flashed 5 different roms in 2 hours or less and my phone wouldn't even turn on and when it did it would get stuck on the tmObile splash screen and restart but I fixed it and now I'm running the best Rom out there lol... reply to this thread and I'll tell you what to do
Sent from my HTC HD2 using xda premium
Click to expand...
Click to collapse
Please can you help me.. I did the same thing.. it kept getting stuck at 0% and then i had to wait like an hour and then i tried again.. now its completely dead!
Please tell me what to do..
Thanks

First of all; This steps can solve your problem. But first of all(don't forget to check 2.08.HSL) try to use "Task29" and if it is success, load Radio ROM 2.15.50.14, and load original Winmo 6.5 ROM (Tmous or EU which phone do you use).
If you are stuck somewhere, then;
Download an original ROM for your HTC device from HTC webside.
- Format your SD card like FAT32 primary.
- Take "RUU_signed.nbh" from an original ROM and copy it to your SD card.
- Rename to "leoimg.nbh"
- Reset your device while pressing the volume down button.
Radio ROM 2.15.50.14;
Radio ROM 2.15.50.14
HD2 Toolkit 4.2.0.1; ( contains task 29, magldr and recovery and also HSPL)
HD2 Toolkit 4.2.0.1

it's revived!
powerofthink said:
First of all; This steps can solve your problem. But first of all(don't forget to check 2.08.HSL) try to use "Task29" and if it is success, load Radio ROM 2.15.50.14, and load original Winmo 6.5 ROM (Tmous or EU which phone do you use).
If you are stuck somewhere, then;
Download an original ROM for your HTC device from HTC webside.
- Format your SD card like FAT32 primary.
- Take "RUU_signed.nbh" from an original ROM and copy it to your SD card.
- Rename to "leoimg.nbh"
- Reset your device while pressing the volume down button.
After several attempts to switch on the phone it finally turned on so I immediately installed stock ROM and it didn't get stuck on 0%.. it worked!!
Do you think I should perform a task 29 now or I can just proceed with installing a new radio and then installing a new ROM?
Thanks again mate!
Apparently I need to install SPL 2.08 before trying to install HSPL and then run android.. anyone know where I can find it?
Nevermind figured everything out Thanks anyway
Click to expand...
Click to collapse

If you want to change your ROM with one another like Android NAND ROM or Windows 6.5 ROM, then use this procedures.
For NAND Android ROM; You must flollow this sequence;
first check your device if it is 2.08.HSPL, and format your sdcard ext3 or ext4 and 1gb (which one you must use is pointed out by your Android chief). Copy new Android ROM into your sdcard's FAT32 section. insert it into your HTC device.
1. do task29
2. instal radio rom 2.15.50.14
3. install magldr 1.13
4. do recovery 5.0.2.6
5. do clear cache and dalvik cache.
6. Choose your android ROM .zip file on sdcard, load and enjoy...
For Windows 6.5 Follow this sequence;
first check your device if it is 2.08.HSPL, Format your sdcard like FAT 32 primary partition. insert it into your HTC device.
1. do Task29
2. Install Radio ROM 2.15.50.14
3. Run LeoCustomRUU.exe like "Run as Administrator" which Windows 6.5 rom you chose to use.
Radio ROM 2.15.50.14;
Radio ROM 2.15.50.14
HD2 Toolkit 4.2.0.1; ( contains task 29, magldr and recovery and also HSPL)
HD2 Toolkit 4.2.0.1

ActiveSync
Hi..
I am new here...
I would like to ask about my htc hd2..
I ve installed android 2.3 and yesterday i tried to update to android 4.0 but something went wrong and now my phone can't load anything...
when i tried to install ROM, it shows phone is not connected...
My ActiveSync also doesn't detect my phone... I can't enter to phone settings coz the phone won't load...
Any ideas ?
Thanks...

Zerocool_uia said:
Hi..
I am new here...
I would like to ask about my htc hd2..
I ve installed android 2.3 and yesterday i tried to update to android 4.0 but something went wrong and now my phone can't load anything...
when i tried to install ROM, it shows phone is not connected...
My ActiveSync also doesn't detect my phone... I can't enter to phone settings coz the phone won't load...
Any ideas ?
Thanks...
Click to expand...
Click to collapse
Are you booting into bootloader and connecting the device to your computer so you can get the HTC Sync connection. Just boot into bootloader by holding the volume down button down and poewering on your device. Connect it to your computer via USB and when you see Serial in the white bar of boo5tloader change to USB you have the HTC Sync connection and can flash your device.

I face a very odd problem with my HD2 EU. After years of 2 different versions of Android on nand I decided to reset it to stock(Vol down+power with leoimg.nbh in root of a FAT32 formatted microsd). When I get in bootloader mode there seem to be 2 instances of bootloader. The first 3 colour screen with all the right wordings lasts a second or two then I get a second 3 colour screen with the same wordings. With my Verbatim 8Gb class4 microsd formatted FAT32 and leoimg.nbh (obtained from the original RUU_Leo_HTC_ITA_1.66.408.1_Radio_15.32.50.07U_2.07.51.22_2_Signed_LEO_Ship.exe) in the root directory, the device does not recognize the file and it's not possible to restore the phone to stock, but I can only get into usb connection.
Being able to get in usb mode with the various versions of HSPL (1-2-3-4) I can still change the bootloader. With the HD2 Android toolkit 4.2.0.1 I can install cLK, Magldr, do a Task29 and repartition.
When I use the RUU installer I can install the RUU_signed.nbh that I used to get the leoimg.nbh BUT when I do it, and it does finish gracefully, on the screen that states the currently installed image THE INDICATION OF SUCH AN IMAGE IS BLANK whilst the name of the image to install is the one I am flashing.If I reflash the same image AGAIN (so I know what's on the device) the info of the installed image is never displayed.So after trying the various bootloaders HSPL and SPL and getting the same result you are my only resort.
Has anybody experienced such a problem? It is as if the the bootloader goes through a script that then starts a second "identical" bootloader (I understand that I may seem crazy) that is not capable of recognizing a leoimg.nbh. All my buttons are still working so it's definitely not a button problem. Therefore in a nutshell the question is: if I can't get the device to recognize a leoimg.nbh is there any other way to make it do so, given that I can communicate via usb without problems ?

help me HTC HD2 shuck on "t mobile logo"

hello
my HTC HD2 shuck on t-mobile (stick together)pink logo
i try to hard reset/soft reset but not done.
so i try to update,then download
RUU_Leo_S_hTC_Asia_India_3.14.720.3_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
run that but at last when progress bar coming always stay on "0%"
i try with sd card too but stop on "loading...."
when it come in tri-colour there show this info..
Code:
PB81100 SS-B3
SPL-2.10.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
how to make properly update it?
where is wrong??
please need BIG help.

is this ROM for your Tmobile phone? I think this is for EU version.
Use this one and if it is works, press thanks button
http://forum.xda-developers.com/showthread.php?t=655653

different region ROM ?
Can you try to installing region specific ROM instead of Asia/India version. I faced similar problem last week as I bought phone in Europe (WWE version) but I was trying to update using Asia/India version.
Also, have you ever used HSPL on your phone?

Boot the device into boot loader and connect it to your computer via USB and flash HSPL 3.03 to it. Then run the RUU again.

T-Macgnolia said:
Boot the device into boot loader and connect it to your computer via USB and flash HSPL 3.03 to it. Then run the RUU again.
Click to expand...
Click to collapse
dear sir,
thanks for reply,
I do as u say.1st make HSPL 3.03 via HSPL4. now updating start but sometime 5%,
sometime 13%,sometime 32% go then error.
what is wrong?

Run RUU file with right click and choose "Run as Administrator",
or
some of your USB device like mouse may be deny your htc device
or
is your usb cable good, are you touching your usb cable during installation?

sattar_00977 said:
dear sir,
thanks for reply,
I do as u say.1st make HSPL 3.03 via HSPL4. now updating start but sometime 5%,
sometime 13%,sometime 32% go then error.
what is wrong?
Click to expand...
Click to collapse
As powerthink posted above me, right click on the RUU and run it as administrator. Also just keep trying it for a while and maybe it will finish the flash. If it just will not finish the flash and keeps giving you errors. Then you can try flashing from SD card, and if that does not work you can try a earlier ROM version.

T-Macgnolia said:
As powerthink posted above me, right click on the RUU and run it as administrator. Also just keep trying it for a while and maybe it will finish the flash. If it just will not finish the flash and keeps giving you errors. Then you can try flashing from SD card, and if that does not work you can try a earlier ROM version.
Click to expand...
Click to collapse
hello sir
i try via sdcard flashing.
I put (RUU_Leo_HTC_GER_1.66.407.1_Radio_15.32.50.07U_2.07.51.22_2_Signed_LEO_Ship)
update compate. but now no power on/no bootlodermode
how to recover?

sattar_00977 said:
hello sir
i try via sdcard flashing.
I put (RUU_Leo_HTC_GER_1.66.407.1_Radio_15.32.50.07U_2.07.51.22_2_Signed_LEO_Ship)
update compate. but now no power on/no bootlodermode
how to recover?
Click to expand...
Click to collapse
Please tell me you do not have a TMOUS HD2? If you do I am very sorry but you hard bricked your HD2. Do you see the 51 I highlighted in the radio version of the RUU you posted? You can not flash a radio with a 51 in it to a TMOUS or you will brick the device. I really wished you would have posted that before you flashed or at least clicked on my guide linked in my sig as I descuss this at the very top of my guide. I am truly sorry friend. The only thing you can do now is have the device JTAGed to fix it. If you want I can give you the contact info on someone that does this for around 40 USD plus shipping and handling.

Does your battery have charge? Did you charge it enough?
Try to use "Reset" button instead of "power" button and "Volume" button together.

powerofthink said:
Does your battery have charge? Did you charge it enough?
Try to use "Reset" button instead of "power" button and "Volume" button together.
Click to expand...
Click to collapse
Sorry powerthink, I hate it as much as anybody else. But it sounds like sattar_00977 has a TMOUS because no bootloader after a complete flash and the ROM had radio version 2.0 7.51.22_2 in it sounds like a bricked TMOUS to me.

powerofthink said:
Does your battery have charge? Did you charge it enough?
Try to use "Reset" button instead of "power" button and "Volume" button together.
Click to expand...
Click to collapse
yes sir battery is fully charged.
Try to use "Reset" button instead of "power" button and "Volume" button together
but not happeaning any thing.

How does one find if its a TMOUS mobile or a non-TMOUS mobile?

T-Macgnolia said:
Sorry powerthink, I hate it as much as anybody else. But it sounds like sattar_00977 has a TMOUS because no bootloader after a complete flash and the ROM had radio version 2.0 7.51.22_2 in it sounds like a bricked TMOUS to me.
Click to expand...
Click to collapse
you are right sir it has (bricked TMOUS). i repair it. repair done. now it show bootloder mode. now it show
PB81100 SS-B3
SPL-2.10.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
Click to expand...
Click to collapse
so please help me which rom is perfect ? if possible link too give.
thanks.

sattar_00977 said:
you are right sir it has (bricked TMOUS). i repair it. repair done. now it show bootloder mode. now it show
so please help me which rom is perfect ? if possible link too give.
thanks.
Click to expand...
Click to collapse
Well first off I am glad you got your device back up and going, but I am curious how you did this, I mean when you JTAG a HD2 it puts HSPL 2.08 on it. Then you can load a ROM to the device. But you say you have SPL-2.10.0000. Did you already flash something to the device after JTAG?
Either way please do not flash a ROM with a radio version that has 51 in it like the last ROM you flashed. Also do not flash a radio version that is below 2.08.50.?? because evfen though they have a 50 in them. The radio versions below 2.08.50.?? or actually 51 radios because they were used in the TMOUS test toms.
Flash the 3.14.1 ROM from this thread, but do not ever flash the 2.01 through 2.09 ROMs from that thread. Also only flash Windows Mobile ROMs from this section of the Windows Mobile development forum.

Did you try last ROM (3.14.1) at following link?
http://forum.xda-developers.com/showthread.php?t=655653

powerofthink said:
Did you try last ROM (3.14.1) at following link?
http://forum.xda-developers.com/showthread.php?t=655653
Click to expand...
Click to collapse
Thanks sir last ROM (3.14.1) upgrade sucessfully but set still hang on "stick together" pink logo, i resetting, hard reset but same.
how to recover?

i am afraid your phone was bricked. but still, I have a little hope
If you still have time and have patience;
Change your HSPL to 2.08.HSPL,
Choose one of them;
1. install this Android ROM which i give you now. It is not only EU version but also TMOUS version. You can use it.
http://forum.xda-developers.com/showthread.php?t=733649
2. You can use this ROM. it is Windows 6.5 ROM for TMOUS.
http://forum.xda-developers.com/showthread.php?t=654504
NOTE : And you have to apply which one you prefer to use, please read this.http://forum.xda-developers.com/showpost.php?p=27266966&postcount=4

powerofthink said:
i am afraid your phone was bricked. but still, I have a little hope
If you still have time and have patience;
Change your HSPL to 2.08.HSPL,
Choose one of them;
1. install this Android ROM which i give you now. It is not only EU version but also TMOUS version. You can use it.
http://forum.xda-developers.com/showthread.php?t=733649
2. You can use this ROM. it is Windows 6.5 ROM for TMOUS.
http://forum.xda-developers.com/showthread.php?t=654504
NOTE : And you have to apply which one you prefer to use, please read this.http://forum.xda-developers.com/showpost.php?p=27266966&postcount=4
Click to expand...
Click to collapse
tnx sir i download
Energy_3.15.2012.SensationXL.LITE.VERSION
but it is zip file how to flash it? via sd card?
i install energy rom sucess but again com NGR logo.
i think i confused so u give direct link of rom please?

-Format your sdcard like FAT32 as primary.
-Copy "Energy_3.15.2012.SensationXL.LITE.VERSION.zip" file into sdcard.
-insert it into your HTC device.
-(on the 3-color screen)Check your HSPL 2.08.HSPL.(not 2.08.0000)
-(on the 3-color screen)do task29.
-(on the 3-color screen)install Radio 2.15.50.14.
-(on the 3-color screen)install Magldr 1.13.
-(on the magldr) choose option 5. "USB Flash" and you will see "USB Flash....USB" when connected your HTC to your computer,
-For repartition (Cwm Recovery) on left side of HD2 Toolkit, choose 400MB=System Partition and Cache Size=45MB (because your phone TMOUS) and Flash it(with "repartition" button).
-After reboot, on the magldr choose "AD Recovery" and it will go into Recovery mod.
-Then select 'install zip from sd card' in the menu,
-Go down to 'choose zip from sdcard' and select your Energy..zip file and follow steps on your device screen.
-When it ask you which model do you have like TMOUS or EU, please choose TMOUS. (as I remember, "Yes-TMOUS, No-EU", you will see 2 option.
-and wait appr. 5 to 10 minutes.
-if you don't have any problem in your machine, it will install it and when it's complete you will choose "reboot your device"
-thats all..
http://d-h.st/C9XEnergy_3.15.2012.SensationXL.LITE.VERSION.zip
http://d-h.st/geXEnergy_3.15.2012.SensationXL.zip