Database Users

Spl 1.42.0000

Where do i find it?
Searched for a long time

Why do you need it?
You can't get it on it's own, you need to flash a stock ROM using the SD card method to get the stock SPL on. If you turn off your phone, hold down the vol down button and turn it on you go into the bootloader - what SPL version is listed in there?
(to get out of the bootloader, take the battery out for 5 seconds and put it back in)

my spl: 1.66.0000
i have updated my hd2 rom once (original update).

You'll need to get a 1.48 ROM and flash back to that using the sd card method to get back to SPL 1.42. Then you can put HSPL on the phone and upgrade again using the activesync method and you'll be ok.
You can get the 1.48 ROM here, just put in your serial number:
http://www.htc.com/nl/SupportDownload.aspx?p_id=297&cat=2&dl_id=804
Then follow these notes:
Flashing Via MicroSD Card
NOTE (PLEASE READ): If you flash a Stock Rom via microSD Card then it will overwrite your HardSPL with a stock SPL included in the nbh file. Therefore if you flash a v2.01 or later Rom (with SPL2.*) you will NOT be able to reinstall HardSPL onto your device and could end up bricking it. This does not apply to custom roms as they do not include an SPL. BE CAREFUL!!
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the LEO Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the .nbh file to LEOIMG.nbh
4. Copy the LEOIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Reset the device while pressing the volume down button to enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.

Wiki and Sticky....
Hey There,
Look to the WIKI and STICKY
All you need is there.... yeah with a real video for beginners...
Grtz,
PS MOD close this....

thnx i know how to get it done now!

Thank you EddyOS, i will also try this since i get "invalid vendor ID" when doing it via USB cable. Hope it works
EDIT: Dang, didnt work "Loading ... Not Allow" + back to bootloader

Help
Hi,
I need to find SPL 1.42.0000 for my leo, swedish.
The link in the previous post didnt work for my SerialNo =(

you can't get just the SPL - you need to flash the stock ROM for your region.
and the link wouldn't work as it was the Dutch HTC site - try here:
http://www.htc.com/se/supportdownloadlist.aspx?p_id=297&act=sd&cat=all

Taken from my Rom Flashing guide:
2. FLASH HARDSPL2 (REQUIRED!! DO THIS BEFORE ANYTHING ELSE)
The Original HardSPL Thread is *HERE*
IMPORTANT: To install/uninstall this HSPL there must be any SPL version from this list on your device:
SPL 1.42.0000, SPL 1.42.HSPL, SPL 1.62.0000, SPL 1.66.0000, SPL 1.66.HSPL,
SPL 2.07.0000, SPL 2.08.0000 SPL, 2.08.HSPL
NOTE: If you have Vista or Windows 7, update WMDC to v6.1 *HERE* first
NOTE: Turn OFF any AntiVirus Program first as it WILL interefere with the flash (there is NO harmful code in the program)
Flashing via ActiveSync with USB Lead (thanks to Bepe)
1. Download HardSPL package from *HERE* and extract to an empty folder
2. Synch Phone with PC in Windows Mobile!!! It has to be connected to activesync or WMDC via USB cable
3. Run HSPL2_RUN.exe from your pc and read all the text carefully
4. When finished click next in the HardSPL program
5. The program will now check the usb connection and enter the bootloader screen (tri colour)
6. NEW: YOU CAN NOW CHOOSE WHICH VERSION OF SPL OR HARDSPL YOU WANT TO FLASH TO YOUR PHONE!!
7. Select your desired HardSPL and click NEXT.
8. HardSPL will now be flashed to your phone.
5. When its finished the HardSPL program will pop up a box saying "successfully Done".
6. Click ok to terminate program and reboot the phone.
7. Congrats, you just flashed HardSPL.

EddyOS said:
you can't get just the SPL - you need to flash the stock ROM for your region.
and the link wouldn't work as it was the Dutch HTC site - try here:
http://www.htc.com/se/supportdownloadlist.aspx?p_id=297&act=sd&cat=all
Click to expand...
Click to collapse
You can flash just the SPL now
Mark.

Spl 1.42.0000000000
Could someone Just send us the link to where this stupid SPL 1.42.00000 that everyone needs for it to work is? We can't find it anywhere????
Where is it?
We not how to load it we need the file!!!!

[email protected] said:
Could someone Just send us the link to where this stupid SPL 1.42.00000 that everyone needs for it to work is? We can't find it anywhere????
Where is it?
We not how to load it we need the file!!!!
Click to expand...
Click to collapse
you are showing your ignorance by getting all demanding, if you had read anything, you would know that spl is part of all official roms.it is not a file in its own right.
the only reason you would be looking for it is if you have a telstra, cos hspl2 works on any spl. in which case you need the 1.49 telstra rom, flash it from sd card and it will downgrade your spl to 1.42
if you don't have a telstra, then you are looking for something you don't need.

i cannot seem to flash my phone! D: it's irritating me greatly...
allow me to tap out my phone for you.
rgb screen:
PB81120 SS-B3
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
i can't flash roms till it's hspl-ed.
hspl2 says i have a bad model number?
i have the US TMO HD2, 512 rom, not 1gb rom.
pretty sure it's only 512, cause with OS running, i check about system, it says i have 4hundred and something avail.
i've tried everything.
i can't even locate a copy of 1.66 rom so i can install 1.42 spl, cause htc says my model number isn't suitable for the rom i try to download.
basically, i'm F%$KED. and i need helps.
please, respond! i just wanna hack this POS winmo 6.5 shiz to something cooler.. D:

ijoshv2 said:
i cannot seem to flash my phone! D: it's irritating me greatly...
allow me to tap out my phone for you.
rgb screen:
PB81120 SS-B3
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
i can't flash roms till it's hspl-ed.
hspl2 says i have a bad model number?
i have the US TMO HD2, 512 rom, not 1gb rom.
pretty sure it's only 512, cause with OS running, i check about system, it says i have 4hundred and something avail.
i've tried everything.
i can't even locate a copy of 1.66 rom so i can install 1.42 spl, cause htc says my model number isn't suitable for the rom i try to download.
basically, i'm F%$KED. and i need helps.
please, respond! i just wanna hack this POS winmo 6.5 shiz to something cooler.. D:
Click to expand...
Click to collapse
Maybe this posting here will help you to get answers to your questions...

htc hd 2
is not working for mi my freind , it just get the color on the phone and them the program say error , can you help me my SPL-2.08.0000

walasquin55 said:
is not working for mi my freind , it just get the color on the phone and them the program say error , can you help me my SPL-2.08.0000
Click to expand...
Click to collapse
do you have a tmous phone? in which case you need hspl1024 (see my sig)
if not, try different usb ports, especially try to use one around teh back of the computer
also, dont forget to right click hspl and 'run as administrator'

nO it does not work that way!
Would be a lot easyer if you just gave us the file 1.42.0000.nbh so we could add it to our SDcard and flash it without it locking or not working! Please I beg you send us over the 1.422.0000 file all by itself!
PLEASE!!!!

tictac0566 said:
Maybe this posting here will help you to get answers to your questions...
Click to expand...
Click to collapse
I have the same problem and so does everyone else, they no the files don't work and they won;'t give us the EXACT 1.42.0000.nbh file so we can SD card flash it!
It would be so simple!!!!!!

ok then
samsamuel said:
you are showing your ignorance by getting all demanding, if you had read anything, you would know that spl is part of all official roms.it is not a file in its own right.
the only reason you would be looking for it is if you have a telstra, cos hspl2 works on any spl. in which case you need the 1.49 telstra rom, flash it from sd card and it will downgrade your spl to 1.42
if you don't have a telstra, then you are looking for something you don't need.
Click to expand...
Click to collapse
How come someone sent over a SPL 2.08.0000 which mine used to be 2.10.0000 and that worked just fine, why wouldn't sending over a file 1.42.0000 just like they did with the 2.08.0000 do the same... IT WOULD!

[Q] HELP!!! I might have bricked this phone trying to flash a stock rom via SD

Hi all,
I would really appreciate if someone can help me reverse this process. I have an HD2 that i need to restore it back to factory ROM/condition and return it to US T-Mobile. I previously have WP7 on nand, Android on SD, Radio 2.15, with Mgldr 1.13 with HSPL 3.
I followed the procedure for flashing through SD as it will remove the HSPL. So i downloaded the ROM from TmoUS website, renamed the file to LEOIMG.nbh, and put it on a 4gb class 2 (FAT32) card. Enter bootloader mode by holding down volume/power button. Then it said loading and ask if I want to write over the image, select yes ... then it start the process. Though, half way through i receive the error message! Now when i turn the phone on i can't get past the bootloader mode. Just the error message even when I try to flash again via SD (the process doesnt even start - just said "loading" then "not allow" error message). When i get it plugged in to flash via desktop, the device is not recognized by the update utility. I'm not sure what could have gone wrong .. but any help or tips to reverse this process is greatly appreciated.
Thanks guys!!

What does it say in bootloader now?

If i just power it on I get the blank screen that said "error installing rom" with the triangle and the exclamation mark in the middle. If I boot into bootloader mode it will first get to the screen where it said "loading" then shortly it will say "error" and "not allow" then take me back to the bootloader mode. though, I noticed that the SPL is now 3.03 instead of 2.08 .. but other than that, I couldnt find a way to flash it by SD or USB. Any suggestion on this? Thanks for your help Macgnolia!

Sounds like it flashed the correct SPL and may be failing on the ROM flash, it sounds like it may be flashing the correct radio too.
What I would do is keep your phone completely off for about 3 hours, then turn it back on into bootloader, then try the flash again.
It might have some random overheat thing going on or something. Since you're back to stock SPL, go ahead and flash via RUU instead of SD and see if that does anything, it should let you since it's a stock ROM you're flashing.

Yeah I am with Orangekid here it might help to let your HD2 rest for a while so the internal temp is reduced as it my be some kind of freak heat issue right now. The HD2 hates heat incase you did not know this. I would still like to know what the top line of your bootloader says so we will know if you have the right device I.D. and that you are not one of the unlucky people to get a their device I.D. mysteriously screwed up by a stock ROM flash.

I'm at work and can't really play with it but definitely I will try it again jz to see if its the heat issue. Also, you think it could be the issue with the card by any chance? I was reading on flashing with SD and there were some conflicting opinions about the class and format for SD. And this is my wifes hd2 .. she'll probably freak out .. hehehe ... Thanks guys '-)
Sent from my HTC HD2 using XDA App

qdochemistry said:
I'm at work and can't really play with it but definitely I will try it again jz to see if its the heat issue. Also, you think it could be the issue with the card by any chance? I was reading on flashing with SD and there were some conflicting opinions about the class and format for SD. And this is my wifes hd2 .. she'll probably freak out .. hehehe ... Thanks guys '-)
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
card shouldn't matter as long as it's 8gb or less from my experience. Once it's off for a few hours just try to reflash stock via RUU and see what happens.
And yeah, go ahead and load up bootloader first to see what the top line says.

I just tested it again .. same problem! at the top right corner it says "RUUNBH" then the series of lines in the red portion of the screen as follows:
PB81120 SS-B3
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
Upgrade ROM code error
Please try again
and if I just power it on it goes to the error message .. then "loading" screen .. then "error" .. then "not allow" .. then back to bootloader mode but the third line now say MicroP-Wrong Platform (0x0)
any suggestion guys??

I thought it might have been that the download rom was corrupted .. went to tmo and download another one .. I tried to flash again .. get from bootloader mode .. then to loading mode .. and just stuck there ..

qdochemistry said:
I thought it might have been that the download rom was corrupted .. went to tmo and download another one .. I tried to flash again .. get from bootloader mode .. then to loading mode .. and just stuck there ..
Click to expand...
Click to collapse
Have you try with different micro sd card?
battery pin check, whether it is bent.
Battery capacity should at least 50%
Did you rename the RUU_signed.nbh to leoimg.nbh?
When you transfer it to sd card, did you using card reader?
Anything is possible. Please take a look of the above check list

I'd be tempted to try a full change of spl, use hspl4 to drop spl from 3.03.0000 down to 2.08.0000 or 2.10.0000, then try first the 2.13 rom and then the 3.14 rom over USB again.

samsamuel said:
I'd be tempted to try a full change of spl, use hspl4 to drop spl from 3.03.0000 down to 2.08.0000 or 2.10.0000, then try first the 2.13 rom and then the 3.14 rom over USB again.
Click to expand...
Click to collapse
Done!! THANK YOU!!!!!
For some odd reasons, my laptop (win7 ultimate) always seems to have connection issues even with chevron for wp7. I plugged it in to my wife's laptop (vista ultimate) and it connects. I was reading your comment on a similar issue in another thread and along with your suggestion here .. I figured it must be HSPL issue. I first used HSPL4 to reinstall 2.08 and immediately mgldr popped up. Then i flash the Tmo stock ROM over it. Then use HSPL4 to flash over (twice) with 3.03 (the one without the HSPL).
It took away the Energy boot screen, now I'm on 3.14 with 2.15 radio. I checked bootloader and it saids the following:
PB81120 SS-B3
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
Which is a problem because I checked on the refurbished device they sent and it has SPL 2.10. And so, I put HSPL 3.03 back on there to flash via SD again. Now i run into the same problem I orginally did .. about 20% into the update process and it stops and said update error. Could this be something obvious that I'm doing wrong? and also is there a way to get spl 2.10 without SD flash??
Thanks bud
Edit: I did it again a couple times via SD and it worked! I checked bootloader and it said spl 2.10 so I guess everything is back to stock now. I guess I'm gonna throw it back in the box and send it off. Thank you everyone for the fast reply and for all the help on this issue ... you guys are awesome! Thanks

[Q] HELP ASAP!!! Software Update Failed and won't read SD Card:(((:((

Before I succesfully flashed Custom Windows Rom and had Android in my SD card root folder. I also flashed HSPL and MAGLDR113 and CWM Recovery v3.2 trying to install Nexus. But I couldn't copy the Nexus...rar file cause I didn't locate the file on the computer.
So I decided to flash back to original ROM for my HD2.
I copied LEOIMG.nbh to SD card but then it said "File cannot be located" so basically it partially copied and when I rebooted my phone and it showed white screen with a message of an update. I cancelled update but nothing happened it just came back to the same message and tried to update software but it failed.
So now I stuck in tri-color bootloader with a message:
SS-B3
SPL-2.10.0000 8G XE
MicroP(LED) 0x05
MicroP(Touch) 0x40
I doesn't even read the card any more so I CANT DO ANYTHING!!
What's weird too when I checked SPL version it was 2.08 but now it's 2.10.
WTF is going on? Can anybody tell me? Is it fixable at all?(((

Ok this is what I would do, I would back up my SD card on my computer. Then I would do a full reformat of my SD card with Fat 32. then re download the Windows Mobile stock ROM for your HD2 and copy it to the re formatted SD card. I would only have the ROM on my SD card and then put it in my HD2 and boot it up into bootloader.
The ROM you tried to flash is what changed your SPL to 2.10.0000. Cause the SPL flashes before the ROM does. So that means it was something wrong with the ROM and it could not flash it.

Yeeeeaaaaayyyy!
I fixed it, man!
What I've missed is to launch bootloader pressing down button, then it showed USB mode at the bottom, after that I could flash stock ROM to my HD2!!!
Now it's all good.
The only thing I wonder now: what HSPL should I flash?
Is HSPL 2.08 still ok?

zandulya said:
I fixed it, man!
What I've missed is to launch bootloader pressing down button, then it showed USB mode at the bottom, after that I could flash stock ROM to my HD2!!!
Now it's all good.
The only thing I wonder now: what HSPL should I flash?
Is HSPL 2.08 still ok?[/QUOTE
You must have flashed a official update for your HD2 so I would say yes cause you are still on official stock software. But I still suggest you do a little double checking to see that the ROM you have is a ROm that was released for your specific HD2.
Click to expand...
Click to collapse

Thanks!!
Yep, I don't remember what link I used but I put in my IMEI so it referred me to a particular rom!
Back on track now testing some new ROMs.
Do u have any suggestions for Android ROMs?

Hello to you all,
I have some sort of the same problem. First my original windows 6.5 did not start up any more. That made me look on the internet to see what options there where to fix it. After finding a lot of options I choosed to install android on my system. That worked for a long time but unfortunately it also hung itself up. As a reaction I tried a hard reset and it looks like that was fatal for my phone because I cannot install anything anymore. The only thing I can come in is bootloader menu but when I want to install anything, it stops before finishing.
Is there someone who can help me with this problem? By forehand thanks!
Kind regards,
Jaimy

[q] help htc hd2 stuck on bootloader screen

i have spent countless hours on this and still have no idea how to fix it..ive searched many threads but none have helped..
i have a htc hd2 and had it on android NAND and just yesterday booting the windows 7 phone onto it.. after it finished the phone rebooted and was stuck on the maglrd screen where it had usb flasher and tetris and all that.. soon i then realized that the maglrd had to be on version 1.3 in order to put windows 7 on it and i had version 1.1 from when i put android on it.. so it was stuck on that screen.. so then i read from a forum that to unistall maglrd and android NAND download a stock ROM for your device then run the setup while your phone is on the tri-colored bootloader screen.. so i downloaded RUU_Leo_1_5_TMOUS_2.10.531.0_Radio_Signed_15.34.50 .07U_2.08.50.08_2_Ship.exe and ran it while on the boot screen after it finished my phone rebooted but then it booted straight to the bootloader screen.. then i downloaded RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2. 15.50.14_LEO_S_Ship.exe and tried the same thing but no luck.. im still stuck.. on the screen it says
PB81120 ss-B3
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x50
maybe that helps.. i dont know what my radio thing is
i admit im a noob i just need HELP

You just got REAL lucky,,, PB81120 is a tmous, right? Red end key green send? Says t mobile below the earpiece?
If yes, then that second rom you flashed is the only non tmous rom that wont DESTROY the phone.
Do NOT flash any more stock roms that don't say TMOUS in the filename.
My suggestion, get tmous 3.14 rom and flash from SD card. Assuming that goes well, then flash hspl magldr etc.

Yeah it's a tmobile phone.. But how can I flash from the sd card when it doesn't even show up on my computer.. I can't select the USB drive mode on my phone for it to pull up on the comp unless there's another program I can use to explore my phone

ah right, no card reader?
well, id get the three shipped tmous roms (2.10 2.13 and 3.14, , you already have the 2.10) and try flashing them again, see if you can get any of them to boot. If you can't id suspect the stuck radio/spl problem, meaning something isn't flashing correctly (usually the radio), but the best way to see this is by sd card flashing, so if you have any access at all to an sd card reader (another phone, perhaps?) then sd card flashing will show you on screen each section as it flashes.
Don't be confused by hspl not being removed after a flash, it won't be. We'll come to that later.
Don't forget you need a 4gb or smaller sd card for flashing.
DO NOT use ANY non tmous stock roms, you will end up with a brick.
EDIT - actually, a good test for the stuck radio/spl problem is to try running hspl3 (or hspl4) and changing the spl to anything other than it currently is (2.08.hspl). If it seems to go OK, but nothing changes in the bootscreen, then that's the problem, but be aware that you could potentially end up with no HSPL installed and no way to re apply it, so if you can get your cands on an sd card reader, go for that first.

thanks i already tried the tmous rom i already had with the 16gb sd card and also an 8gb.. i guess i need to buy another one.. i have a 3.14 rom but its not a tmous one.. where do i go to dowload them?
so first i need to get a 2gb sd card and try flashing with a tmous 2.10, 2.13, or 3.14 ROM before testing the stuck radio/spl problem correct?
maybe im just doing the flashing wrong.. first i extract the file using 7-zip .. then i rename the .nbh file to leoimg.nbh then i copy it to the sd card then unplug and turn on and let it run and press the reset button on the back when its finished.. and it says on the tri-colored screen that my the spl is 2.10.0000 now and underneath it now says MicroP(LED) and MicroP(TOUCH)

You need to use a 4Gb or smaller sd card to flash a rom using the sd card bootloader flashing method. Get your hands on one of those and you'll have no problem flashing a stock TMOUS rom.
Sent from my HTC HD2 using XDA App

qweasdzxcasd said:
maybe im just doing the flashing wrong.. first i extract the file using 7-zip .. then i rename the .nbh file to leoimg.nbh then i copy it to the sd card then unplug and turn on and let it run and press the reset button on the back when its finished.. and it says on the tri-colored screen that my the spl is 2.10.0000 now and underneath it now says MicroP(LED) and MicroP(TOUCH)
Click to expand...
Click to collapse
ok well that all looks ok, and your spl has changed from 2.08.hspl to 2.10.0000 .
Did you take note of the blue writing on the phone screen when you sd card flashed? looking out for ''rsa_radio fail'' or some such)

It says radio v2 ok. rcust ok. Boot loader ok. Splash ok. os ok. Configdata ok. Ruu wallpaper1 ok. Ruu wallpaper2 ok update complete update success .... And it still didn't work with a 2gb micro sd card and a tmous 3.14 rom
and how would I even change my hspl to 3 or 4 if my phone doesn't even show up on the computer.. It wouldn't connect to active sync

what if i plug in my phone and instead of flashing with the sd card just click on RomUtilityUpdate and let it run?

yep do that. You can flash from teh bootloader screen, doesnt have to connect to activesync, so long as it says USB in teh white bit of teh bootloader screen.

it's still not working.. I've tried 2.13 and 2.14 ... I'm about to try 2.10 .. But I doubt it'll work

Nope still nothing..

looks like a warranty issue then (assuming its still under warranty?) at least the spl is now warranty safe.

So what does that mean.. do i take it into the store then an they fix it?
won't they just tell me to go since i tampered with the system?

so long as the spl says 2.xx.0000 (the 0000 is the important bit) and you cant see anything like magldr, , , are there any obvious signs? it doesnt boot does it? (im on my pohone one handed, im not checking back thru the thread )

Right now it's 2.10.0000 an it still doesn't boot

Then there's no way anyone can tell you've been flashing. Anything a tech does to make it work will wipe any evidence.(unless they forensically examined it, which they don't)
Gotta be out of warranty by now tho? And if its a paid repair it doesn't matter if you've been flashing.

Oh i see.. and yes it's out of warranty.. i guess i'll just take it to the store then

They basically said the phone is no more.. but i was just talking it employees at the place so maybe i need to talk to a tech person or something..

bootloader problm
is there any software which can put my hd2 tmus into bootloader...as i cant get into boolder by holding vol down key....wat can ido....

[Q] Hd2 flashing problem

Hello everyone, I was trying to install new rom by using hd2 toolkit, first I did a task29 then I flashed radio. I mixed the steps and installed hspl, so after that I am not able to install anythink on my phone. First I tried installing Magdlr but it wouldn't passed 0%, then I tried task29 again and 0% again. Then I think the problem would be hd2 toolkit but no, I tried task29 standalone and no work, flashing a radio rom and no work. What can I do now? Thanks in advance..

ejjjjj said:
Hello everyone, I was trying to install new rom by using hd2 toolkit, first I did a task29 then I flashed radio. I mixed the steps and installed hspl, so after that I am not able to install anythink on my phone. First I tried installing Magdlr but it wouldn't passed 0%, then I tried task29 again and 0% again. Then I think the problem would be hd2 toolkit but no, I tried task29 standalone and no work, flashing a radio rom and no work. What can I do now? Thanks in advance..
Click to expand...
Click to collapse
Don't you read things carefully before doing something like this? If you had another phone, there's a chance you could have bricked it by doing something stupid like that.
Are you able to enter the bootloader? What SPL version does it show there? Have you tried flashing a stock ROM via the SD card?

First task29 was completed, then radio rom installed, and then hspl. All done by hd2 toolkit. After that I couldn't able to flash anythink like rom, task29 or else. So my phone only enters when i open it with volume button, else it only displays htc logo.
PB81100 SS-BC
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50

I even tried installing stock rom but still no good! It stucks at loading... screen, help me please!!

hi, check the link Below, does it show the same SPL?

nope, mine is SPL-2.08.0000, but I can change it with hspl4, but can't downgrade it!

ejjjjj said:
First task29 was completed, then radio rom installed, and then hspl. All done by hd2 toolkit. After that I couldn't able to flash anythink like rom, task29 or else. So my phone only enters when i open it with volume button, else it only displays htc logo.
PB81100 SS-BC
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
Click to expand...
Click to collapse
U mixed up the sequence mate, the guide says that 1st install HSPL then Task29 then Radio.
Did u still have connection between your phone and computer?
if not try hit reset button while holding down the volume key.

yep, i mixed it. i can reset it but without any rom update or any update (it won't pass 0%) it has no meaning to reset the phone. I have connection between computer via usb in bootloader mode only!

If u can connect the phone to your computer via boot loader that's a good new's mate. There's still hope to fix your phone.
So u currently has SPL 2.08 right?
and please check if u has radio ver 2.15.50.14?
if u has both of this and u still cannot install MAGDLR.
I used to has this problem. After i decided to switch to cLK it Fixed everything.
may be u should try too .
U can do it via HD2tool kit. by connect phone to your computer under bootloader mode (the red green white blue screen)
** Dont' for get to chosing cLK partition that's match your ROM requirement **
after install cLK then install Recovery then Flash the ROM.

thamlim said:
If u can connect the phone to your computer via boot loader that's a good new's mate. There's still hope to fix your phone.
So u currently has SPL 2.08 right?
and please check if u has radio ver 2.15.50.14?
if u has both of this and u still cannot install MAGDLR.
I used to has this problem. After i decided to switch to cLK it Fixed everything.
may be u should try too .
U can do it via HD2tool kit. by connect phone to your computer under bootloader mode (the red green white blue screen)
** Dont' for get to chosing cLK partition that's match your ROM requirement **
after install cLK then install Recovery then Flash the ROM.
Click to expand...
Click to collapse
Please, if you don't know exactly what you're talking about don't give out incorrect information. It is NOT possible to install cLK without HSPL, and thus the Task29 won't work either.
@OP, have you tried installing a stock ROM from the SD card? I'm not sure exactly how to do this (see, not giving incorrect info ) but if I'm not mistaken the procedure is to rename the stock ROM to a .zip extension, unzip it, copy RUU_signed.nbh to the SD card and rename it to LEOIMG.nbh, then enter the bootloader and follow the onscreen instructions. However, please check somewhere else that what I've said is correct as well. From here, you can just flash HSPL then MAGLDR, CWM and a zip ROM.

Problem solved, thanks for your answers!