Related
So many to choose from and i don't have any experience other then Virtuous Picasso 1.1.0. that is the only one i've flashed. Does it hurt your tabby installing new roms constantly over and over again. Just seems like something at some point would get corrupted or something. I don't know.....lol This is very new to me.
What rom is everyone using.
I was wondering the excact same thing,maybe everyone's waiting for an acer 3.2 update.I'm on virtuous picasso 1.1 also,I was hoping for a vp update as that rom seems pretty good so far.Anyone know when we'll see anything as good or are there better that you guys use like taboonay,etc? Thanks.
you will ALWAYS get different answers to this question. It all depends on how you use your tablet. Your best option is try them out and see for yourself. Load the ROM use it for a day try a kernel see what fits your needs, don't rely on other peoples answers.
joegreen1967 said:
I was wondering the excact same thing,maybe everyone's waiting for an acer 3.2 update.I'm on virtuous picasso 1.1 also,I was hoping for a vp update as that rom seems pretty good so far.Anyone know when we'll see anything as good or are there better that you guys use like taboonay,etc? Thanks.
Click to expand...
Click to collapse
Hey question for you since your using the same rom. Does your Tablet turn off at night by itself. I used my tablet all day and at night I charge it while i sleep. When i wake up in the middle of the night i unplug the tabby if the power button is white meaning peak charge and then go back to sleep. when i get up in the morning the tablet is turned completely off and the battery is around 90%.........i don't get it. does yours do this?
I'm on Taboonay and loving it...
Currently using Taboonay 3 and richardtrip's 3.3 kernel.
Loving the speed and stability. Good power usage despite being OC'd to 1.5ghz. Had to apply patches to get Netflix going and still having ALL cameras intact.
Needed alt wpa supplicant file to enable adhoc networking...
... But yeah. Good ROM. I'd highly recommend it.
Some people were having issurs with the install, but I followed the instructions CAREFULLY and had zero issues...
Good luck!
Achristocat said:
Currently using Taboonay 3 and richardtrip's 3.3 kernel.
Loving the speed and stability. Good power usage despite being OC'd to 1.5ghz. Had to apply patches to get Netflix going and still having ALL cameras intact.
Needed alt wpa supplicant file to enable adhoc networking...
... But yeah. Good ROM. I'd highly recommend it.
Some people were having issurs with the install, but I followed the instructions CAREFULLY and had zero issues...
Good luck!
Click to expand...
Click to collapse
+ 1 on this.
It's the best rom i've ran. Stability and performance, least amount of bugs. highly recommend.
Sent from my A500 using XDA Premium App
Can you give me links. I don't get the whole kernel thing.........i flashed a rom because it was like wipe and flash....lol how do i flash a rom and a seperate kernel.......
do you have links to the rom your using and then the kernel so i can check out the instructions and get the right one.
Did you mean Taboonay 2.0 and richardtrip's 3.3 kernel?
JiggaGeazY said:
Did you mean Taboonay 2.0 and richardtrip's 3.3 kernel?
Click to expand...
Click to collapse
That's what he meant. I'm also running the same combo and I love it.
prophetic said:
That's what he meant. I'm also running the same combo and I love it.
Click to expand...
Click to collapse
so how do you install a kernel? Do i go through the same process wipe all, flash taboonay 2.0 rom reboot into recovery and then just flash the new kernel the sameway i flashed the rom without the wipe and stuff?
I'm running Taboonay and richardtrips kernel but I found that when I intstalled the latest version youtube wouldn't work. So i reinsatlled the earlier version of the kernel and now youtube works fine. Bit starnge but a few others had the same problem. I'm also haveing problems with the keyboatrd on the site here. No matter which keyboa$d i use the back/delete button doesn't work hence all the typos here
Not sureif this is a kernel/rom/site issue?
Taboonay 2.0 using richardtrips 3.4 kernel (3.4 addressed h.264 playback and overclocking stability)
stock 3.1
Rooted via IconiaRoot - Richardtrip's kernel installed - max cpu set to 1504, min 256 - switch my Setcpu app between "ondemand" (when i have plenty of battery) and "conservative" (when my battery is low).
is taboonay built on original iconia stock or some other rom? or total original honeycomb (if there's a such a thing)
jamesnmandy said:
Taboonay 2.0 using richardtrips 3.4 kernel (3.4 addressed h.264 playback and overclocking stability)
Click to expand...
Click to collapse
nexgenasian said:
is taboonay built on original iconia stock or some other rom? or total original honeycomb (if there's a such a thing)
Click to expand...
Click to collapse
I would check the taboonay thread but afaik the a501 is the only one we have a 3.2 rom to work from. So if i remember correctly it is based off of a a501
I am running HV 1.1 with HV 3.4 kernel, OC'd to 1.4Ghz. I find this combo stable and fast. My quadrant score is 4124 and I have no WiFi or YouTube issues. YouTube would not work when I was running the HV 3.3 kernel with the HV 1.1. I wonder what quadrant scores other people are getting with their ROM/kernel combos?
I re-flashed with Taboonay v.2.0/Richardtrips v.3.3 Kernel and it fixed every problem i was having. Best ROM/kernel combo ever! Super smooth, zero lag and amazing battery life!. Overclocked to 1.4ghz and getting better gaming performance then i was before as well! Awesome!
My Quadrant Standard Score at 1.4ghz is ( 3952 ) but i'm a hell-of-a-lot cooler then you! LOL
JiggaGeazY said:
I re-flashed with Taboonay v.2.0/Richardtrips v.3.3 Kernel and it fixed every problem i was having. Best ROM/kernel combo ever! Super smooth, zero lag and amazing battery life!. Overclocked to 1.4ghz and getting better gaming performance then i was before as well! Awesome!
My Quadrant Standard Score at 1.4ghz is ( 3952 ) but i'm a hell-of-a-lot cooler then you! LOL
Click to expand...
Click to collapse
I'm jealous. I keep getting random disconnects with all acer firmware 3.2 roms. I hope with the acer pushing out the new update today it'll fix that issue in the custom roms.
Sent from my PG86100 using Tapatalk
JiggaGeazY said:
I re-flashed with Taboonay v.2.0/Richardtrips v.3.3 Kernel and it fixed every problem i was having. Best ROM/kernel combo ever! Super smooth, zero lag and amazing battery life!. Overclocked to 1.4ghz and getting better gaming performance then i was before as well! Awesome!
My Quadrant Standard Score at 1.4ghz is ( 3952 ) but i'm a hell-of-a-lot cooler then you! LOL
Click to expand...
Click to collapse
You should update your kernel to 3.4. Its even better.
Sent from my A500 using xda premium
Just updated! Haven't noticed any difference in the way i use my tabby but still such a nice smooth combo!
JiggaGeazY said:
Just updated! Haven't noticed any difference in the way i use my tabby but still such a nice smooth combo!
Click to expand...
Click to collapse
Youtube hd was choppy before, and if you did a lot of benchmarking it would throttle back the cpu. Both addressed in 3.4
I have moved from CM7 to Hombase 5.4, and found that setcpu no longer seems to do anything. on CM7 it worked as i had hoped, underclocking the phone when i was doing low intensity stuff like texting, and pushing it up to full power for videos etc. now it does nothing but tell me core temps, which are always high as its always running at 1Ghz.
Can anyone explain how to get it back to underclocking?
Many Thanks
Try a different kernel.
Sent from my CM860
ishamm said:
I have moved from CM7 to Hombase 5.4, and found that setcpu no longer seems to do anything. on CM7 it worked as i had hoped, underclocking the phone when i was doing low intensity stuff like texting, and pushing it up to full power for videos etc. now it does nothing but tell me core temps, which are always high as its always running at 1Ghz.
Can anyone explain how to get it back to underclocking?
Many Thanks
Click to expand...
Click to collapse
This is a known issue with the OC faux kernel. I was running into the same problem with his enhanced stock kernel after using webtop. After reflashing the enhanced stock 0.2.0 it would still get stuck at max 1Ghz after using webtop, but a reboot would get the underclocking working again.
I only tried the webtop hack to see if I could get it working. I haven't gone back into it at all so I don't know if this is something that will reoccur. Although I will say that with my day to day use I have not run into any clocking issues since.
Thanks, is there a page somewhere which details which kernels do what and which would work with my rom?
Sent from my MB860 using xda premium
ishamm said:
Thanks, is there a page somewhere which details which kernels do what and which would work with my rom?
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
This is the page for faux's kernels. As far as details, start reading and searching through that thread as well as the threads for any ROMS you are using. 99% of the time people will either have the same problem (and possible fix), the other 1% of the time they will identify a bug (i.e. maxed out CPU).
Keep in mind faux does have different kernels for Froyo, GB, and CM7.
For some reason even if I move the slider from 1300my to 1000, when I touch the screen with at least 3 fingers for a few seconds it pegs out at 1300. I read our cpu's are daisy chained so to speak
so the 2nd core kicks in when needed. I tried cpu tuner and it gives the option to powersave and only use one core or if you choose performance it will allow Both cores. Just might be setcpu isn't designed fully for our dual core setup.
thanks for the link to kernels, but i cant find one for HomBase, or a Kernel only download on the homebase thread. i have the Version2, which has some blur, but only the 1.0Ghz clock kernel. where could i get the 1.3GHz download by itself, to see if that might help, as its the one CM7 had iirc
Thanks
ishamm said:
thanks for the link to kernels, but i cant find one for HomBase, or a Kernel only download on the homebase thread. i have the Version2, which has some blur, but only the 1.0Ghz clock kernel. where could i get the 1.3GHz download by itself, to see if that might help, as its the one CM7 had iirc
Thanks
Click to expand...
Click to collapse
Get the 1.3 from the faux thread that I linked to. They're in the very first post...
CM7 is the only ROM that has its own custom faux kernel. For all other ROMS just match the kernel to the build the ROM is based off of (Froyo or GB). If you're using V.2 of Homebase then use the GB one.
Update: Also, there are other kernels out there. I was only using faux's as an example since you were using CM7 and Homebase.
thanks, ive now got the 1.3Ghz kernel installed successfuly, but it still seems like setcpu will not underclock. i dont know if its normal, but the "Scaling" option is greyed out, and i cant get access to the Advanced tab. is there something im doing wrong in setcpu itself?
thanks again
ishamm said:
thanks, ive now got the 1.3Ghz kernel installed successfuly, but it still seems like setcpu will not underclock. i dont know if its normal, but the "Scaling" option is greyed out, and i cant get access to the Advanced tab. is there something im doing wrong in setcpu itself?
thanks again
Click to expand...
Click to collapse
Lack of underclocking is a known issue with the latest OC kernel. I'm unclear whether it's actually a bug with the kernel or with setCPU not supporting dual core devices. But yeah, there's a problem with it right now. I'm on the stock enhanced, and other than the webtop issue I mentioned above, it works fine.
Scaling/advanced are not available, this is something that is determined by the kernel you are using not the app.
ok so if i understand you right i would be best off using the stock enhanced kernel (for now), as it will underclock fine?
ishamm said:
ok so if i understand you right i would be best off using the stock enhanced kernel (for now), as it will underclock fine?
Click to expand...
Click to collapse
It's working perfectly for me, except after webtop use (which I don't normally use).
I'm still having the same issues regardless of weather I choose power save or performance it will not underclock, and those are the only governors I get the option of :s
Sent from my MB860 using xda premium
Hey hackers,
I need to pick a rom for my TF101. My tablet has been running a little slow and a little choppy, so I'm thinking it's the rom. I'm currently running cm10. I'm thinking Revolver or Revolution would be the best for performance and speed - would one of these be a good choice?
eaglesbaby said:
Hey hackers,
I need to pick a rom for my TF101. My tablet has been running a little slow and a little choppy, so I'm thinking it's the rom. I'm currently running cm10. I'm thinking Revolver or Revolution would be the best for performance and speed - would one of these be a good choice?
Click to expand...
Click to collapse
Well ive flashed them all lol and CM10 is by a long way the fastest (equal with JB AOSP but more stable) both Revolver and Revolution are about the same as far performance goes, I prefer Revolver for ICS roms but is still much less performance the cm10. Ive found CM10 to be a little choppy with the stock launcher, Apex is much better might be worth trying that before flashing another rom.
Thanks for the tip about the launcher and other roms. Tried apex - it was awful, actually I'll let you know what happens with some other roms.
Revolver ICS runs great but CM10 is improving everyday.
Sent from my HTC Droid Incredible
Which CM10 rom are you running? There's a few out now and not all run the same. If it's the RaymanFX CM10 then I'd be suprised you're having performance issues.
Speaking of which, did you overclock at all? A little boost to the CPU speed can make a world of difference. Depending on your tablet, however, you may experience some crashing if you push it too hard. 1.2 to 1.4 GHz seems to be the sweet spot for most people.
AnTuTu CPU Master (Free) is what I use. I've set it to 1600Mhz with smartassV2 scaling and the sio I/O scheduler. My tablet reacts to overclocking very well though so your mileage may vary.
grgmre said:
Which CM10 rom are you running? There's a few out now and not all run the same. If it's the RaymanFX CM10 then I'd be suprised you're having performance issues.
Speaking of which, did you overclock at all? A little boost to the CPU speed can make a world of difference. Depending on your tablet, however, you may experience some crashing if you push it too hard. 1.2 to 1.4 GHz seems to be the sweet spot for most people.
AnTuTu CPU Master (Free) is what I use. I've set it to 1600Mhz with smartassV2 scaling and the sio I/O scheduler. My tablet reacts to overclocking very well though so your mileage may vary.
Click to expand...
Click to collapse
I was running a nightly version. I switched to Revolver - it's much smoother. I woud say it's running perfectly but I don't want to jinx myself.
eaglesbaby said:
I was running a nightly version. I switched to Revolver - it's much smoother. I woud say it's running perfectly but I don't want to jinx myself.
Click to expand...
Click to collapse
There's your problem with cm10 lol you need to give RaymanFX's cm10 a try. Ive gone from Revolver to RaymanFX's cm10 and the performance increase is amazing.
Is the download link up? I only see the kernel. Do i need to flash the kernel separately? I'm a little confused.
Sent from my Transformer TF101 using Tapatalk 2
eaglesbaby said:
Is the download link up? I only see the kernel. Do i need to flash the kernel separately? I'm a little confused.
Sent from my Transformer TF101 using Tapatalk 2
Click to expand...
Click to collapse
Yeah heres the link: (http://goo.im/devs/RaymanFX/downloads/CyanogenMod-10/cm_tf101-b2.zip) it comes with a kernel but you can alternatively flash the K.A.T kernel that fixes a few issues with JB roms, I haven't tho
Thanks so much.
Sent from my Transformer TF101 using Tapatalk 2
i agree i tryed the raymans cm 10 v1 and 2.. fast.. smooth..then i tryed v6 from him.. and it seemed to lag.. maybe ill try it again..and that link is v2.. try the v6
i only left that rom cuz of 2 widgets that i like alot wont work.. a wifi widget.. and asus clock/weather widget... im such a noob
eaglesbaby said:
Hey hackers,
I need to pick a rom for my TF101. My tablet has been running a little slow and a little choppy, so I'm thinking it's the rom. I'm currently running cm10. I'm thinking Revolver or Revolution would be the best for performance and speed - would one of these be a good choice?
Click to expand...
Click to collapse
V7 CM10 seems to work well for me.
TeamEOS is my ROM of choice.
Sent from my Galaxy Nexus using Tapatalk 2
Newest Team EOS with Kat Kernal overclocked to 1400mhz is very smooth for me.
EOS with Elite kernel.
IT has best benchmark so far .
eaglesbaby said:
Hey hackers,
I need to pick a rom for my TF101. My tablet has been running a little slow and a little choppy, so I'm thinking it's the rom. I'm currently running cm10. I'm thinking Revolver or Revolution would be the best for performance and speed - would one of these be a good choice?
Click to expand...
Click to collapse
Reinstall CM10. It should be blazing fast already.
I use rayman's Cm10 V7 (V6 was fine too) + KatKernel 70 and it is super fast
f4kill said:
I use rayman's Cm10 V7 (V6 was fine too) + KatKernel 70 and it is super fast
Click to expand...
Click to collapse
Where are you getting v7 from? V6 only online for me.
Sent from my Galaxy S3 using Xda Premium. Long live the Galaxy S!
If you dont mind running nightliess ... RaymanFX's CM10.1 OC @ 1.6Ghz, not having any issues on my part running the nightlies, stable version is coming soon
I recently flashed the newest Trinity Kernel on my Nexus 7. I still have the stock ROM. I tried to tweak the CPU settings with ROM Toolbox and the most I can overclock is 1400mhz. Why can't I overclock to 1600? Is it because of the stock ROM? I'm looking into Glazed Jelly Bean as a custom ROM but I'm not sure I want or need to use a custom ROM at this point.
Any suggestions?
Because he dropped the Max. You probably flashed A111 correct? That's a TSVZ meaning it is slightly over clocked and undervolted kernel meant for battery not for performance.
Sent from my Nexus 7 using Xparent White Tapatalk 2
U2Bono269 said:
I recently flashed the newest Trinity Kernel on my Nexus 7. I still have the stock ROM. I tried to tweak the CPU settings with ROM Toolbox and the most I can overclock is 1400mhz. Why can't I overclock to 1600? Is it because of the stock ROM? I'm looking into Glazed Jelly Bean as a custom ROM but I'm not sure I want or need to use a custom ROM at this point.
Any suggestions?
Click to expand...
Click to collapse
try a96, its one of my faves. it has a max of 1700mhz http://goo.gl/mLUCZ
Mildly on topic question ... do you notice any imporvments with overclocking? My first experience with overclocking as on my Hero, and then Galaxy S1, but this N7 just feels so fast i cant see overclocking making it any smoother? lol
thanks
myke66 said:
Mildly on topic question ... do you notice any imporvments with overclocking? My first experience with overclocking as on my Hero, and then Galaxy S1, but this N7 just feels so fast i cant see overclocking making it any smoother? lol
thanks
Click to expand...
Click to collapse
yes. its noticeable, but not like on the older devices.
simms22 said:
yes. its noticeable, but not like on the older devices.
Click to expand...
Click to collapse
Nice, ill have to look into rooting sometime soon.
Ok, I got the a96 and I've flashed it...
Is there a detailed changelog for each version? The a111 said it was a 1600mhz kernel so I don't understand why it was dropped down to 1400. That's where my confusion was.
I did notice some increase in speed at 1400. I was having some stuttering issues with Dead Trigger and Minecraft PE, and they were less with the 1400. I've got it running at 1600 now but I don't know what it will do to the battery or how well it will perform. I'll find out later. I've run through the battery pretty quickly today, but I was tinkering with it A LOT so it's not accurate.
What kind of tweaks could I do using Rom Toolbox that would help me maximize my battery while overclocking to 1.6?
Dont over clock.. i dont even see a need to. I use the ondemand gov which stutters a little but using interactive clears that up. Also using the CFQ IO as it is the stock IO used. Its stock so its gotta be good . Also you should turn F-Sync off that helps quite a bit. Also you could toggle auto hotplug and make it only run two cores while gaming and then turn it back on when finished so that way it will hotplug cores as it sees necessary. You could also up the voltages a little bit, some CPU's dont like the lower voltage and that will cause stuttering and glitching just up them by 25mV and see if it clears if not try another 25mV.
I will try those things, but I really want to play with overclocking and learn what happens. This is my first Android device so I'm experimenting and playing around.
But I have one more question...I've overclocked to 1.5...I found 1.6 to be the same as 1.5. But it seems that after an hour or so, it resets to 1.3. in ROMToolbox. Why is this?
Don't use rom toolbox. Use the Trinity app. It sticks just fine for me. Besides you support the dev to make better kernels.
Sent From My Toro+ via White Tapatalk
simms22 said:
try a96, its one of my faves. it has a max of 1700mhz http://goo.gl/mLUCZ
Click to expand...
Click to collapse
i **** my pants a little when it says "system succesfully corrupted, please freak out now"
MRsf27 said:
i **** my pants a little when it says "system succesfully corrupted, please freak out now"
Click to expand...
Click to collapse
Lol its a joke... its the updater-script you can make it say anything... :laugh:
MRsf27 said:
i **** my pants a little when it says "system succesfully corrupted, please freak out now"
Click to expand...
Click to collapse
ha!
youre not the first
Overclocking past 1.4 Ghz doesn't result in any major usability improvements. I've gone up to 1.7 Ghz and the only thing it does is make my tablet really warm and unstable. All you really need for improving system performance is I/O tweaks to speed up app and page loading, and a little bit of GPU overclocking to help with the transitional effects.
and, to be honest, depending which trinity kernel im using, im using either 1100 or 1150mhz mostly. on a111 im using 1100mhz and on a96 i used 1150mhz. with those speeds everything is still fast but a bit better on battery
Overclocking
If you want a little more information about the the overclocking if you havent already you might want to check out http://forum.xda-developers.com/showthread.php?t=1788759 its the official thread of the trinity kernel for grouper.
Hi guys,
I have a problem with my nexus s (i9023).
I've pretty much tried all the ROMs available on XDA. Every time I try to do with any overclocking kernel, but after some use the phone crashes and restarts.
The processor of the nexus s does not support overclocks?
FYI over clocking does cause your phone to restart or crash
Sent from my Nexus S using xda premium
Increase your voltage.
Sent from my Nexus S 4G using xda premium
Have you tried matr1x? It was stabile for me when i overclocked!
4I-I said:
Have you tried matr1x? It was stabile for me when i overclocked!
Click to expand...
Click to collapse
Yeah ... My i9023 also can handle 1200 with matrix without raising voltages and with no reboot whatsoever .
Unfortunately for us (and really nice for him, because he moved to N4 ) .. The matrix is discontinued..
Ps: check out the kernel in the hellybean thread . it has live oc working as well. :thumbup:
raducux said:
Yeah ... My i9023 also can handle 1200 with matrix without raising voltages and with no reboot whatsoever .
Unfortunately for us (and really nice for him, because he moved to N4 ) .. The matrix is discontinued..
Ps: check out the kernel in the hellybean thread . it has live oc working as well. :thumbup:
Click to expand...
Click to collapse
which kernel should I install? bfs or cfs? Thanks
Inviato dal mio Nexus S con Tapatalk 2
fedpisano said:
Hi guys,
I have a problem with my nexus s (i9023).
I've pretty much tried all the ROMs available on XDA. Every time I try to do with any overclocking kernel, but after some use the phone crashes and restarts.
The processor of the nexus s does not support overclocks?
Click to expand...
Click to collapse
For some reason my phone (also i9023) can only handle 1320mhz OC.
Other steps (1200, 1400, 1096, etc..) cause reboots.
Try using matrix cfs then OC to 1320mhz.
Or marmite 7.2.1, increase all voltages by +25mv then OC to 1320mhz.
raducux said:
Yeah ... My i9023 also can handle 1200 with matrix without raising voltages and with no reboot whatsoever .
Unfortunately for us (and really nice for him, because he moved to N4 ) .. The matrix is discontinued..
Ps: check out the kernel in the hellybean thread . it has live oc working as well. :thumbup:
Click to expand...
Click to collapse
Please point me to the Nexus S discontinuing..
My phone easily handles 1200mhz... 1320mhz works well too but under heavy load I'll get a reboot... 1400mhz def needs raised voltages... I've clocked that high before but I don't think the phone runs as smooth at that setting... Might be too much for the processor... This was using various kernels... Currently on Matr1x CFS 24.0 cm @ 1200mhz running fine!
Sent from my Nexus S 4G using Tapatalk 2
Try trinity kernel also. I could go upto 1.4ghz with ease in that.
Sent from my Nexus S
seibott said:
Try trinity kernel also. I could go upto 1.4ghz with ease in that.
Sent from my Nexus S
Click to expand...
Click to collapse
Some kernels are undervolted... So it makes it less stable... I'm on cm10.1 right now with the included kernel and it seems to be running at 1400MHz just fine...
Sent from my Nexus S 4G using Tapatalk 2
I use marmite 7.2 but still no could not find a way to make it stable @ 1096mhz .. I just need the GPU clock to be stable so that I get a smooth gaming experience as well . Plus I cant revert back to matrix as its JB 4.1.1/4.1.2 and not 4.2.1 ... Anyone was able to make a i9023 stable @ 1096mhz ??
ReVo_007 said:
I use marmite 7.2 but still no could not find a way to make it stable @ 1096mhz .. I just need the GPU clock to be stable so that I get a smooth gaming experience as well . Plus I cant revert back to matrix as its JB 4.1.1/4.1.2 and not 4.2.1 ... Anyone was able to make a i9023 stable @ 1096mhz ??
Click to expand...
Click to collapse
I'm more or less stable at 1096 running BB6 ROM and marmite 7.2. Sometimes it gets slow with heavy usage and needs a reboot.
the1dynasty said:
Some kernels are undervolted... So it makes it less stable... I'm on cm10.1 right now with the included kernel and it seems to be running at 1400MHz just fine...
Sent from my Nexus S 4G using Tapatalk 2
Click to expand...
Click to collapse
+1 for that! same setup same experience.
running liveoc at 110% only on 1.0Ghz step with +25mv over the default voltage. running smooth!
ej8989 said:
For some reason my phone (also i9023) can only handle 1320mhz OC.
Other steps (1200, 1400, 1096, etc..) cause reboots.
Try using matrix cfs then OC to 1320mhz.
Or marmite 7.2.1, increase all voltages by +25mv then OC to 1320mhz.
Click to expand...
Click to collapse
Same with my i9023, 1320mhz works great on my setup of CM 10,1, Matrix 7.2.3 kernel. Stock voltages.
I've been trying for a long time to find truly stable voltages for either 1096 (marmite) or 1200 (air kernel), but irrespective of my mVs I can never get beyond two days of uptime before I experience a freeze. All overclocks seem to work at the default volts set by each developer but there's this latent instability I can't do anything about. Starting to think this is just the nature of the beast and very few NS users actually have CPUs capable of long-term OC stability.
Still, a few extra FPS in the launcher and a slightly smoother Temple Run probably don't justify an OC anyway.
i use marmite overclock 1-2 days ...all ok here
I can run [email protected] for as long as I want. Even 1320 with 25 volts increased. Never had issues.
Sent from my Nexus S
Well dang.
Maybe I just have an anaemic ARM chip.
That being said, I've really only ever experienced the symptoms of an unstable overclock when my battery's been close to empty. I suppose that might cause the voltage to dip and my phone to freeze. Might try 1096 again using 7.3.