I have moved from CM7 to Hombase 5.4, and found that setcpu no longer seems to do anything. on CM7 it worked as i had hoped, underclocking the phone when i was doing low intensity stuff like texting, and pushing it up to full power for videos etc. now it does nothing but tell me core temps, which are always high as its always running at 1Ghz.
Can anyone explain how to get it back to underclocking?
Many Thanks
Try a different kernel.
Sent from my CM860
ishamm said:
I have moved from CM7 to Hombase 5.4, and found that setcpu no longer seems to do anything. on CM7 it worked as i had hoped, underclocking the phone when i was doing low intensity stuff like texting, and pushing it up to full power for videos etc. now it does nothing but tell me core temps, which are always high as its always running at 1Ghz.
Can anyone explain how to get it back to underclocking?
Many Thanks
Click to expand...
Click to collapse
This is a known issue with the OC faux kernel. I was running into the same problem with his enhanced stock kernel after using webtop. After reflashing the enhanced stock 0.2.0 it would still get stuck at max 1Ghz after using webtop, but a reboot would get the underclocking working again.
I only tried the webtop hack to see if I could get it working. I haven't gone back into it at all so I don't know if this is something that will reoccur. Although I will say that with my day to day use I have not run into any clocking issues since.
Thanks, is there a page somewhere which details which kernels do what and which would work with my rom?
Sent from my MB860 using xda premium
ishamm said:
Thanks, is there a page somewhere which details which kernels do what and which would work with my rom?
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
This is the page for faux's kernels. As far as details, start reading and searching through that thread as well as the threads for any ROMS you are using. 99% of the time people will either have the same problem (and possible fix), the other 1% of the time they will identify a bug (i.e. maxed out CPU).
Keep in mind faux does have different kernels for Froyo, GB, and CM7.
For some reason even if I move the slider from 1300my to 1000, when I touch the screen with at least 3 fingers for a few seconds it pegs out at 1300. I read our cpu's are daisy chained so to speak
so the 2nd core kicks in when needed. I tried cpu tuner and it gives the option to powersave and only use one core or if you choose performance it will allow Both cores. Just might be setcpu isn't designed fully for our dual core setup.
thanks for the link to kernels, but i cant find one for HomBase, or a Kernel only download on the homebase thread. i have the Version2, which has some blur, but only the 1.0Ghz clock kernel. where could i get the 1.3GHz download by itself, to see if that might help, as its the one CM7 had iirc
Thanks
ishamm said:
thanks for the link to kernels, but i cant find one for HomBase, or a Kernel only download on the homebase thread. i have the Version2, which has some blur, but only the 1.0Ghz clock kernel. where could i get the 1.3GHz download by itself, to see if that might help, as its the one CM7 had iirc
Thanks
Click to expand...
Click to collapse
Get the 1.3 from the faux thread that I linked to. They're in the very first post...
CM7 is the only ROM that has its own custom faux kernel. For all other ROMS just match the kernel to the build the ROM is based off of (Froyo or GB). If you're using V.2 of Homebase then use the GB one.
Update: Also, there are other kernels out there. I was only using faux's as an example since you were using CM7 and Homebase.
thanks, ive now got the 1.3Ghz kernel installed successfuly, but it still seems like setcpu will not underclock. i dont know if its normal, but the "Scaling" option is greyed out, and i cant get access to the Advanced tab. is there something im doing wrong in setcpu itself?
thanks again
ishamm said:
thanks, ive now got the 1.3Ghz kernel installed successfuly, but it still seems like setcpu will not underclock. i dont know if its normal, but the "Scaling" option is greyed out, and i cant get access to the Advanced tab. is there something im doing wrong in setcpu itself?
thanks again
Click to expand...
Click to collapse
Lack of underclocking is a known issue with the latest OC kernel. I'm unclear whether it's actually a bug with the kernel or with setCPU not supporting dual core devices. But yeah, there's a problem with it right now. I'm on the stock enhanced, and other than the webtop issue I mentioned above, it works fine.
Scaling/advanced are not available, this is something that is determined by the kernel you are using not the app.
ok so if i understand you right i would be best off using the stock enhanced kernel (for now), as it will underclock fine?
ishamm said:
ok so if i understand you right i would be best off using the stock enhanced kernel (for now), as it will underclock fine?
Click to expand...
Click to collapse
It's working perfectly for me, except after webtop use (which I don't normally use).
I'm still having the same issues regardless of weather I choose power save or performance it will not underclock, and those are the only governors I get the option of :s
Sent from my MB860 using xda premium
Related
I'm still more or less a noob to the whole android customization, even though I tried out a lot of different roms on my saphire (MT3G). I recently upgraded to th MyTouch 4G, and immediately found a root method to install a custom rom. I tried several different roms for this device as well over the, last few weeks, and found that the ICE GLACIER 1.1.6 runs the most stable, and closest to the original. So my question is this: I have also been looking into overclock kernels as of late only to find that all the ones I try with my rom are either incompatible or cause frequent freezes, crashes, or restarts. Is there a kernel out here I have missed that will run smoothly with my rom? I have already looked trough some of the forums here and tried both versions of the faux kernel, and all the rest I have seen that aren't CM specific. Anyone can point me in the right direction would be greatly appreciated.
Sent from Iced out Glacier (MT4G) v. 1.1.6
Gorilla's OC kernel that TeamSilence put in Ice-Glacier is a very strong and stable OC kernel. if I remember correctly that kernel will go up to 1708 or 1709 if you have SetCPU.
I am using set cpu, but even the kernel that comes with the rom freezes my phone up, or causes force closes and restarts out of the blue.
Sent from Iced out Glacier (MT4G) v. 1.1.6
powduh09 said:
I am using set cpu, but even the kernel that comes with the rom freezes my phone up, or causes force closes and restarts out of the blue.
Sent from Iced out Glacier (MT4G) v. 1.1.6
Click to expand...
Click to collapse
If you're OCing to 1.7GHz, that may not be the kernel's fault. Every CPU is different, some can't overclock as high as others. Here's a nifty thread on the subject.
Very true, just like the MT3G-Slide mine could go well into the 900's before it would lockup but my wife's can only hit 844 any higher and it locks
jdkoren said:
If you're OCing to 1.7GHz, that may not be the kernel's fault. Every CPU is different, some can't overclock as high as others. Here's a nifty thread on the subject.
Click to expand...
Click to collapse
Thanks for the info. I love my MT4G as is, so overclocking isn't really a big issue, after reading this article, I am begining to wander if it is even a good idea. I was only curious to find out the problem because I never had such troubles overclocking my saphire (MT3G)
Edit: have reduced settings to 1497600mhz. Going to play around a little bit and see what my best settings are. As of now, this settings have outlasted all others. Thanks to those who responded. And HAIL to the devs who spend their time creating all these roms, so noobs like myself can easily make their devices unique!¡!¡!¡!¡!
Sent from my HTC Glacier using XDA App
Try Faux's kernel with smartass gov. Set at default to 1.1ghz. He makes great kernels and is very active updating and making them better.
I've been flashing his kernels like crazy. As the famous tiger says......there grrrrrreat!
Sent from my HTC Glacier using XDA App
Vinsane said:
Try Faux's kernel with smartass gov. Set at default to 1.1ghz. He makes great kernels and is very active updating and making them better.
I've been flashing his kernels like crazy. As the famous tiger says......there grrrrrreat!
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
Does the kernel affect battery life given the same clock speed? What I mean is if I am using CM7 RC1 with whatever Kernel it came with... and I change to the Faux kernel and keep the same clock speed will I see diff. battery life?
Are there any kernels that are tuned for better battery life?
Thanks,
RA
Vinsane said:
Try Faux's kernel with smartass gov. Set at default to 1.1ghz. He makes great kernels and is very active updating and making them better.
I've been flashing his kernels like crazy. As the famous tiger says......there grrrrrreat!
Click to expand...
Click to collapse
I'm running on the kernel that came with Ice Glacier now, thanks to a hard crash around midnight last night. I've been set at 1497mhz since I restored. No freezes, acceptable battery temps, and blazing response time. Now I only wander if one of the kernels allow a little better fine tuning, because if I try to change this one it only has two more setting, one in the 1600s and then max, both of which cause my phone to go crazy...
Sent from my HTC Glacier using XDA App
radamo said:
Are there any kernels that are tuned for better battery life?
Click to expand...
Click to collapse
I don't know for certain, but I would think it matters more if the kernel is undervolted or not. Assuming the same usage patterns and CPU clock settings/profiles, the kernel that utilizes less voltage would preserve more battery, would it not? (Anyone with experience on the subject wanna chime in?)
jdkoren said:
If you're OCing to 1.7GHz, that may not be the kernel's fault. Every CPU is different, some can't overclock as high as others. Here's a nifty thread on the subject.
Click to expand...
Click to collapse
I would like to say thanks for your help on this, been set to 1497mhz for almost 24hrs now with no force closes freezes or out of the blue restarts
Sent from my HTC Glacier using XDA App
Hello all!
Just upgraded my wife from the MyTouch 3G Slide to the G2 as she has to have a keyboard and we were on our 5th replacement Slide. So, as she is not the geek that I am, she will not be constantly flashing new ROMs and such. However, I am going to at least install the latest CM and I am looking for kernel suggestions. I already have root, s-off, new hboot, and all that, I'm just waiting for CM7 to finish downloading.
I started using Android with the G1 and constantly updating Radios, as well as ROMs and I currently use a Samsung Vibrant running a TeamWhiskey ROM. It's stable as anything, I like the theme, and CM7 still has some broken stuff on the Vibrant. I'm glad to see that Eugene recently picked up a G2 as he made some bad ass kernels and ROMs for the Vibrant.
So, let's here those kernel recommendations and why you recommend them.
Thanks!
Well am currently using mexdroidmod and their kernel is pretty awesome because its fast and stable. My best advice is to test the diffrent kernel and read through the tread, see what people say about it. All the kernels I have tried are all awesome so you should try them
Sent from my HTC Vision using XDA Premium App
pershoot's kernel. great batt life and OCing
Umaro's kernel has been rock solid for me and has tons of features as well. You can OC all the way to 1.9 Ghz if you so please and it has smartass.
well considering your wife isn't much of a techie.. i say you should go with pershoots kernel because he's always releasing updates and i've never had a problem with any of them. the battery life is excellent if you use the right radio (.17 and .30 have been good to me), but you need to experiment with this though. the phone runs beautifully, just make sure you use superwipe+ to format/wipe so you don't end up with gps issues like many people have had, good luck!
I've run umaro, eugene, pershoot, flippy, pyro, etc etc... aaand I've decided that the provided kernel is pretty much good to go. yeah, there are some little trinkety things with a few of the above kernels that the standard CM7 kernel doesn't support... but honestly, they're worthless to a user who just wants to turn the phone on and have it work.
set her up with the stock kernel @ 245-1017 (I haven't found a reason yet to ditch the ondemand governor, it seems to work best with CM7) and a vanilla gingerbread launcher and she'll be blown away.. that's my $.02
Like said above, CM kernel is great. I've tried most or even all available kernels for CM and finaly decided to stick with original one. It's stable and supports OC (up to 1.5GHz) "out of box", so really, I see no single reason to use the other ones.
Sent from my HTC Vision using XDA App
AllWin said:
Like said above, CM kernel is great. I've tried most or even all available kernels for CM and finaly decided to stick with original one. It's stable and supports OC (up to 1.5GHz) "out of box", so really, I see no single reason to use the other ones.
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
I'm also thinking about changing the kernal, but only for smartass. Does smartass offer that much of an increase on battery life or anything else? Also, when you OC, do you use SetCPU or just CyanogenMod Settings?
slapshot30 said:
I'm also thinking about changing the kernal, but only for smartass. Does smartass offer that much of an increase on battery life or anything else? Also, when you OC, do you use SetCPU or just CyanogenMod Settings?
Click to expand...
Click to collapse
not at all pooping on any of the guys who swear by smartass/other governors, but the change in battery life is almost unnoticable for me.. the change in performance however can be pretty apparent.
here's my problem with "battery saving" governors:
in order to save battery, these governors are supposed to be more intelligent about which frequencies they select once a task is called... well, that's all well and dandy, but the problem is that the majority of battery-hogging apps (ie streaming music/video, gaming, browsing for a long time, being on the phone, etc) are still going to be battery hogs with or without a fancy governor. the governor isn't capable of making an app that needs a lot of processing power run well at a lower frequency, it can only try to be more selective about which frequencies it uses in order to attempt to save battery life.
additionally, most people use their phones like this: phone is idle (ie screen off), and a call arrives. call ends, phone is back to idle. texting a few people, back to idle. playing a game for 15 minutes, back to idle.
is it really logical to assume that these short bursts of activity are going to benefit at all from a fancy shmancy governor? I doubt it.
I still swear by ondemand or interactive (both work well for me) thru built-in settings if possible (ie cyanogen performance settings). second choice would be setcpu with no profiles (unless you're overclocking heavily, then you should at least have a temp warning profile). at this point, screen-off profiles don't do a damn bit of good, because pretty much every kernel we have for the vision is going to scale down during inactivity.
Feel Free to post and give feedback ^_^
Also feel free to Vote the thread ^_^
Q&A is in Post 2
_____________________________________
Hi Everyone, Arrow here and this is my guide to find what is the best aosp setup for your evo or android. It is true when people say "every phone is different." However there is an average of people that get similar results. At the moment people have different interest such as some people want performance and some want to improve their battery life. Of course certain people want both but only some get both.
*Remember what i put here is an average and may be different on your evo*
AOSP GB ROM'S: Ok so to start off, these are aosp roms still being updated as of now.
CyanogenMod 7 (CM7) - The most famous aosp rom out there, all or almost all other aosp roms are based off of this rom. This rom has a stable rom and experimental nightly builds. Anyone will tell you that you can't go wrong by choosing this rom. and believe me you will enjoy it.
CyanogenMod 7 Thread
Miui - This rom has the longest battery life and is very customizable. This rom is based off of CM7 and is an excelent rom. However unlike CM7 this rom does not have 4g so if you are willing to sacrifice 4g then believe me this is your rom.
Miui Thread
Gingerbread Evo Deck - Ok so although CM7 is amazing decks gb rom has said to be the exact same thing but giving off better battery life. other then that it is pretty much the same thing with some minor tweaks and some bloat ware removed.
Gingerbread-Evo-Deck's Thread
Xplod E4G - Team Nocturnal designed this rom and it is pretty much CM7 with the Sony Launcher + their apps. This rom will give your phone a nice cool feel that other people don't have. If you like a lot of eye candy then get this rom because it is CM7 just with a different look and feel.
Team Nocturnals Xplod E4G RLS1.2
teh roxxorz said:
using Xplod: there's a 50/50 chance the new tiamat kernels [4.0.7+] may not boot, in that case, they should use 3.3.7.
Click to expand...
Click to collapse
ICS(mod7) - Team Blaze designed this rom and you can consider this rom like Xplod E4G, a rom just like CM7 with some minor tweaks but with a different look and feel. None the less this rom has something very special this is the closest rom to being like ICS (Ice Cream Sandwich). I 100% support this rom because they are doing the best they can to make this rom look and run as smooth as ICS. so if you want to look like your ahead of the game definitely get this rom.
ICS(mod7) Thread
AOSP GB Kernels: These are three kernels that i know of, if you know of more please let me know and i will add them.
Tiamat 4.1.0 - This is the latest kernel made by Tiamat and this is the only aosp kernel still being updated. This kernel on average gives people great performance but lacks on battery life. The main Governor for this kernel is SmartassV2 which is a balanced governor, good to turn on your phone and good to use on a normal day to day bases. For this kernel i do recommend using this governor. It does have SBC and Non-SBC kernels. *Side Note* (Some people say Tiamat 3.3.7 works better for them and is also known as the LEE Kernel because it was awesome like Bruce Lee and looks like Lee backwards [337])
Tiamat Website I also put the Zips in the Attachment (At The Bottom)
Savaged-Zen - This kernel is no longer being updated, however it is still amazing this kernel seems to be Tiamat's competition. Where Tiamat lacks on battery Savaged-Zen does not. However it's performance is not as good as Tiamat. This Kernel comes in two version BFS (Brain F***ed Scheduler) and CFS (Completely Fair Scheduler). BFS is said to give better performance and CFS is the normal kernel. This kernel only comes with SBC however you may download "SVZ Manager" which will allow you to turn SBC on or off. The main governor for this kernel i believe is on demand However i use smartass and a lot of people us InteractiveX.
Savaged-Zen CFS sbc I also put the Zips in the Attachment (At The Bottom)
Savaged-Zen BFS sbc in attachments (At The Bottom)
SVZ Manager I also put the Zips in the Attachment (At The Bottom)
GoDm0de - This Kernel was made by toastcfh and is no longer being updated. It is non-sbc and in my opinion definitely the best non-sbc kernel. This Kernel has insane battery life and a pretty good performance. If you do not want to use an sbc kernel i recommend for you to 100% use this kernel. The Governor for this kernel is set on on demand (i think) however i got the best battery/performance using Interactive.
GoDm0dE Kernel I also put the Zips in the Attachment (At The Bottom)
AOSP ICS ROM'S:
ICS rom by: the_Plattypus and it is still in Alpha testing. however the development for this rom is moving really fast so hopefully a beta will come soon.
EVO 4g Ice Cream Sandwich from source
ICS-evo-deck: This Rom is by kushdeck, After testing out Decks ICS Pre-Alpha 4 & 7 rom i conclude that although it is a alpha it can easily be used as a day to day rom. extremely fast and very snappy. only thing that i found not working was the camera. (Now on Alpha5)
[ROM][ICS][1-11-12][WIP] ics-deck-evo [alpha5]
All Decks ICS Pre-Alphas
All Decks ICS Gapps
AOSP ICS Kernels:
Jaredthegreat ICS - jared has the most advanced ics rom which is in beta 2 but does not have a working camera to check this rom go here:
[ROM's] -ICS- 4.0.1-4.0.3>[AOSP]<--~B.2.0~
Will post them when they are released!!!
Rom Manager/Kernel Manager:
Rom Manager: This is an app from the android market and is extremely useful for pretty much anything. you can back up your rom, you may go into boot loader and you can check if certain roms such as "CM7 Nightlies" have been updated. However people do prefer Amon Ra for flashing, which is another plus of Rom Manager it allows you to flash alternative recovery, which will flash Amon Ra for you.
Kernel Manager: This app was working before but has stopped now, however if it does start working again what it had was pretty much all the kernels that you needed for any rom. this app would allow you to flash a new kernel immediately by going to the kernel you want to flash.
Reserved
Q&A:
Q: What is SBC?
A: SBC stands for super battery charger. SBC is trickle charging, It stops your battery from dropping from 100% to 90% right when you take it off the charger. Some say that it harms your battery but i haven't seen any harm and plus it only costs $5 to get a new battery on Amazon.
Q: How to set up and flash your roms and kernels?
A: well my friend "Crossrocker" made a guide for this with everything you need. so just click to go to his thread. [GUIDE||Oct/23]Best AOSP(CM7|Decks|MIUI) configuration.
Q: What is the difference between governors?
A: This Thread by "RJackson" explains it all:SetCPU governors (explained)
But if you're too lazy to click it here they are:
As explaind by RJackson:
ondemand - Available in most kernels, and the default governor in most kernels. When the CPU load reaches a certain point (see "up threshold" in Advanced Settings), ondemand will rapidly scale the CPU up to meet demand, then gradually scale the CPU down when it isn't needed. - SetCPU website
conservative - Available in some kernels. It is similar to the ondemand governor, but will scale the CPU up more gradually to better fit demand. Conservative provides a less responsive experience than ondemand, but can save battery. - SetCPU website
performance - Available in most kernels. It will keep the CPU running at the "max" set value at all times. This is a bit more efficient than simply setting "max" and "min" to the same value and using ondemand because the system will not waste resources scanning for the CPU load. This governor is recommended for stable benchmarking. - SetCPU website
powersave - Available in some kernels. It will keep the CPU running at the "min" set value at all times. - SetCPU website
userspace
A method for controlling the CPU speed that isn't currently used by SetCPU. For best results, do not use the userspace governor. - SetCPU website
Interactive - The 'interactive' governor has a different approach. Instead of sampling the cpu
at a specified rate, the governor will scale the cpu frequency up when coming
out of idle. When the cpu comes out of idle, a timer is configured to fire
within 1-2 ticks. If the cpu is 100% busy from exiting idle to when the timer
fires then we assume the cpu is underpowered and ramp to MAX speed.
If the cpu was not 100% busy, then the governor evaluates the cpu load over the
last 'min_sample_rate' (default 50000 uS) to determine the cpu speed to ramp down
to.
As explained by MDJ:
SMARTASS GOVERNOR - is based on the concept of the interactive governor.
I have always agreed that in theory the way interactive works - by taking over the idle loop - is very attractive. I have never managed to tweak it so it would behave decently in real life. Smartass is a complete rewrite of the code plus more. I think its a success. Performance is on par with the "old" minmax and I think smartass is a bit more responsive. Battery life is hard to quantify precisely but it does spend much more time at the lower frequencies.
Smartass will also cap the max frequency when sleeping to 245Mhz (or if your min frequency is higher than 245 - why?! - it will cap it to your min frequency). Lets take for example the 998/245 kernel, it will sleep at 245. No need for sleep profiles any more![/QUOTE]
As explained by teh roxxorz:
Lagfree - like the performance governor. It will scale the cpu to higher frequencies when needed, but not to 100% like performance, so you'll get a lil better battery out of it
SmartassV2 - A smarter smartass governor. Code was re-managed/removed to make it more optimized, and have better scaling performances
InteractiveX - a better interactive governor I believe; low scale cpu settings, for texting, browsing, ect, nothing intensive. I wouldn't use it for emulators, ect.
Q: Do you need PRL/Profile/Radio updates? Do you need to go back to sense based to do these still?
A: No you don't have to go back to sense to do these and you don't have to do these because Rom's will come with what you need. None the less if you would like to update your radios here is a thread by "Calkulin" where he keeps the latest radios updated: [ Radios ][ 9-5 ] All EVO Radio, WiMAX, PRI, NV & HBoot versions
Q: Does HDMI mirroring work on these roms?
A: As of this moment Miui and CM7 both have HDMI mirroring working, and sense all the other ones are cm7 with some tweaks they as well have HDMI working however from what i have read the only one that has not had problems with HDMI is Decks Gingerbread Rom
Q: Are all other major features (4G (except for Miui), bluetooth, front & rear camera, GPS, apps such as Netflix, Skype, Google Voice, Sprint Visual voicemail) all working at least as well as on a Sense or stock ROM?
A: Yes everything is working, however on CM7 and i presume on some others you also have to flash a gps fix which you can get from this thread: [GUIDE||Oct/23]Best AOSP(CM7|Decks|MIUI) configuration. and the Voicemail seems to have some issues for some people but works flawlessly on Decks with it's gapps + Voicemail which you may also get from this thread: [GUIDE||Oct/23]Best AOSP(CM7|Decks|MIUI) configuration.
Q:My wifi is connecting/disconnecting after a second, what should i do?
A: This answer was given to me by "teh roxxorz." This has nothing to do with your rom or kernel, do this:
Back up everything into Titanium Backup
Boot into recovery
wipe cache, Dalvik, and pretty much everything
reflash your rom,kernel and gapps (or if you would like to check out some other roms and kernels just click on the link in my sig)
once you've set up your phone download Titanium Backup from the market
in titanium backup restore all your apps ONLY!!! (don't get apps w/ data - only get apps, and do not get system data)
after this your wifi should be working just fine
Q: I am having wake issues?
A: Here is a Guide made by JBabey[FIX] Wake Issue (Android OS) - Combination of Radio/PRI/NV/Wimax/GPS !Solved!
Q: Can i make my 3g speed faster?
A: Yes, This answer was given to me by teh roxxorz:
You need to flash a sprint sense rom. I emphasize sprint because it won't work on the sense 3.5 roms, as they're all ports of other non sprint roms.
1. Flash sense rom
2. Obtain your msl, download msl reader from market, use it, write it down
3. type in ##3282# , input your msl (you can get this from the app msl reader)
4. Click edit mode > advanced
5. Scroll down to HHTD proxy port and address
6. Change the proxy port to 0 and proxychange the address to 0.0.0.
Q: How can I fix my GPS?
A: This answer was given to me by teh roxxorz:
- flash a sense rom
- open up the dialer
- Type ##GPSCLRX# or ##4772579#
- Your enter your MSL at the prompt
- Your phone will soon reboot > done
Q: Is there a guide like this but for sense roms?
A: Yes if you are looking for a sense guide rather than aosp then check out this thread by tropicalbrit
Q: What is your setup at the moment?
A: Rom - Decks 4.0.3 Pre-Alpha 7 ICS Rom
Kernel - Stock
Governor - Conservative
CPU Max/Min Frequency - 729/128
IncrediControl (app) - (-100) [I get to (-100) by first doing (-75) and leaving it there for 3 days and then I do another (-25)]
Car-o-Dope (CoD) setup
Nice setup. Thanks
Sent from my PC36100 using xda premium
Steven 1 said:
Nice setup. Thanks
Sent from my PC36100 using xda premium
Click to expand...
Click to collapse
and thank you for such a quick reply ^_^
Not too bad. Good thing on steering them to tiamat. Lemme know if you need anything.
teh roxxorz said:
Not too bad. Good thing on steering them to tiamat. Lemme know if you need anything.
Click to expand...
Click to collapse
lol i was about to message you to check out this thread, but actually i do need something. do you happen to know a description of: lagfree, smartassV2, and interactiveX? or at least where i can get one?
Green_Arrow said:
lol i was about to message you to check out this thread, but actually i do need something. do you happen to know a description of: lagfree, smartassV2, and interactiveX? or at least where i can get one?
Click to expand...
Click to collapse
Lagfree - like the performance governor. It will scale the cpu to higher frequencies when needed, but not to 100% like performance, so you'll get a lil better battery out of it
SmartassV2 - A smarter smartass governor. Code was re-managed/removed to make it more optimized, and have better scaling performances
InteractiveX - a better interactive governor I believe; low scale cpu settings, for texting, browsing, ect, nothing intensive. I wouldn't use it for emulators, ect.
Also, you should also disclose to people using Xplod: there's a 50/50 chance the new tiamat kernels [4.0.7+] may not boot, in that case, they should use 3.3.7.
And any reason you were gona message me?
teh roxxorz said:
Lagfree - like the performance governor. It will scale the cpu to higher frequencies when needed, but not to 100% like performance, so you'll get a lil better battery out of it
SmartassV2 - A smarter smartass governor. Code was re-managed/removed to make it more optimized, and have better scaling performances
InteractiveX - a better interactive governor I believe; low scale cpu settings, for texting, browsing, ect, nothing intensive. I wouldn't use it for emulators, ect.
Also, you should also disclose to people using Xplod: there's a 50/50 chance the new tiamat kernels [4.0.7+] may not boot, in that case, they should use 3.3.7.
And any reason you were gona message me?
Click to expand...
Click to collapse
pretty much so you can check it out and see if it was good, you seem to post everywhere i do and you seem to know a lot.
Green_Arrow said:
pretty much so you can check it out and see if it was good, you seem to post everywhere i do and you seem to know a lot.
Click to expand...
Click to collapse
Maybe there's a case of a stalker?! [kidding]
Though glad I could help. And thank you.
teh roxxorz said:
Maybe there's a case of a stalker?! [kidding]
Though glad I could help. And thank you.
Click to expand...
Click to collapse
No problem ^_^
Green_Arrow said:
No problem ^_^
Click to expand...
Click to collapse
Tis all good.
has anyone tried that ICS(mod7) rom?
Helpful threads for the win, thanks mr arrow
Sent from my PC36100 using xda premium
Nice helpful thread , I like that you attached the kernels seeing that a lot of people these days are always asking for links to them.
linsalata28 said:
Nice helpful thread , I like that you attached the kernels seeing that a lot of people these days are always asking for links to them.
Click to expand...
Click to collapse
thank you, and yea it was a pain for me to find them just to attach them lol
Toney Starks said:
Helpful threads for the win, thanks mr arrow
Sent from my PC36100 using xda premium
Click to expand...
Click to collapse
no problem ^_^
Green_Arrow said:
no problem ^_^
Click to expand...
Click to collapse
You could have asked I keep all of them just incase.
Edit: I quoted the wrong post lol.
I was talking about the kernels.
cnstarz said:
has anyone tried that ICS(mod7) rom?
Click to expand...
Click to collapse
i actually did, it runs really smooth and i believe atm everything is working. if there is anything wrong with it, then it was something cm7 did because it is the same thing with a few tweaks and a different look.
linsalata28 said:
You could have asked I keep all of them just incase.
Edit: I quoted the wrong post lol.
I was talking about the kernels.
Click to expand...
Click to collapse
oh lol i was like huh , and well now i know lol
Hi,
Thanks for guide... I am considering changing from
my stock rooted ROM, so very timely for me!
Some features that you don't mention or summarize
that may help me and others.
PRL/Profile/Radio updates? I believe you need to
go back to sense based to do these still? [yuk]
HDMI mirroring?
Are all other major features (4G (except for Miui),
bluetooth, front & rear camera, GPS, apps such as
Netflix, Skype, Google Voice, Sprint Visual voicemail)
all working at least as well as on a Sense or stock ROM?
Thanks in Advance,
Peter
I've done a bit of reading and don't seem to be able to identify a kernel that works fully with webtops.
There are 2 current issues:
1. Status bar on webtops do not work with popular kernels
2. CPU speed locks at 1ghz when in webtop
I know for a fact this is an issue with Faux's kernels and it is typically there on Clemsyn's kernels. Are there any kernels out right now that may provide some of the performance and battery life tweaks of Faux's codes w/ a working webtop?
I recently purchased the $50 lapdock and am interested in trying to get everything working. I may even give up Faux kernels to go back to stock =(
I have a stock ROM with Clemsyn's timing tweaked kernel. I have tried webtop with the multimedia dock (not the lapdock...backordered like most others), and I've noticed that both cores peg at the 1.4 GHz max and the phone could heat a small room. Like others have reported, after I quit webtop, the processors are still pegged at 1.4GHz, and almost 100% utilization. I get poor performance after that until I reboot the phone. Not very nice.
The main reason I wanted to go with an alternate kernel is more for UC and UV. Right now I have Battery Saver set to the max, which seems to UC me to 608 MHz most of the time and I don't really see any performance issues. I know stock doesn't give OC and I don't even think it does UV. Don't know about UC.
I haven't paid attention to the status bar issue...I've only used webtop so far just to check it out...but with the lapdock I plan to use it more (coupled with the full Ubuntu mod).
clenynsns uv better than any other lkernal
Sent from my MB860 using xda premium
You can use kholk's kernel, and i think it works perfectly with webtop
Sent from my MB860 using xda premium
Edit - Nevermind
Sent from my MB860 using Tapatalk
On my lapdock/webtop now and can confirm that everything appears to be working well with Kholk's kernel.
After seeing the suggestion here, I tried it and am both speedy and stable using the 1.5 GHz version with everything undervolted -75. Got some freezes in Webtop if I opened more than a few Firefox tabs when I UVed -100
Glad this kernel is webtop compatible. It helps a pretty good bit. Definitely makes being without MIUI/CM7 more tolerable.
never mind. I am dumb.
The latest faux kernel also works with webtop now.
I recently flashed the newest Trinity Kernel on my Nexus 7. I still have the stock ROM. I tried to tweak the CPU settings with ROM Toolbox and the most I can overclock is 1400mhz. Why can't I overclock to 1600? Is it because of the stock ROM? I'm looking into Glazed Jelly Bean as a custom ROM but I'm not sure I want or need to use a custom ROM at this point.
Any suggestions?
Because he dropped the Max. You probably flashed A111 correct? That's a TSVZ meaning it is slightly over clocked and undervolted kernel meant for battery not for performance.
Sent from my Nexus 7 using Xparent White Tapatalk 2
U2Bono269 said:
I recently flashed the newest Trinity Kernel on my Nexus 7. I still have the stock ROM. I tried to tweak the CPU settings with ROM Toolbox and the most I can overclock is 1400mhz. Why can't I overclock to 1600? Is it because of the stock ROM? I'm looking into Glazed Jelly Bean as a custom ROM but I'm not sure I want or need to use a custom ROM at this point.
Any suggestions?
Click to expand...
Click to collapse
try a96, its one of my faves. it has a max of 1700mhz http://goo.gl/mLUCZ
Mildly on topic question ... do you notice any imporvments with overclocking? My first experience with overclocking as on my Hero, and then Galaxy S1, but this N7 just feels so fast i cant see overclocking making it any smoother? lol
thanks
myke66 said:
Mildly on topic question ... do you notice any imporvments with overclocking? My first experience with overclocking as on my Hero, and then Galaxy S1, but this N7 just feels so fast i cant see overclocking making it any smoother? lol
thanks
Click to expand...
Click to collapse
yes. its noticeable, but not like on the older devices.
simms22 said:
yes. its noticeable, but not like on the older devices.
Click to expand...
Click to collapse
Nice, ill have to look into rooting sometime soon.
Ok, I got the a96 and I've flashed it...
Is there a detailed changelog for each version? The a111 said it was a 1600mhz kernel so I don't understand why it was dropped down to 1400. That's where my confusion was.
I did notice some increase in speed at 1400. I was having some stuttering issues with Dead Trigger and Minecraft PE, and they were less with the 1400. I've got it running at 1600 now but I don't know what it will do to the battery or how well it will perform. I'll find out later. I've run through the battery pretty quickly today, but I was tinkering with it A LOT so it's not accurate.
What kind of tweaks could I do using Rom Toolbox that would help me maximize my battery while overclocking to 1.6?
Dont over clock.. i dont even see a need to. I use the ondemand gov which stutters a little but using interactive clears that up. Also using the CFQ IO as it is the stock IO used. Its stock so its gotta be good . Also you should turn F-Sync off that helps quite a bit. Also you could toggle auto hotplug and make it only run two cores while gaming and then turn it back on when finished so that way it will hotplug cores as it sees necessary. You could also up the voltages a little bit, some CPU's dont like the lower voltage and that will cause stuttering and glitching just up them by 25mV and see if it clears if not try another 25mV.
I will try those things, but I really want to play with overclocking and learn what happens. This is my first Android device so I'm experimenting and playing around.
But I have one more question...I've overclocked to 1.5...I found 1.6 to be the same as 1.5. But it seems that after an hour or so, it resets to 1.3. in ROMToolbox. Why is this?
Don't use rom toolbox. Use the Trinity app. It sticks just fine for me. Besides you support the dev to make better kernels.
Sent From My Toro+ via White Tapatalk
simms22 said:
try a96, its one of my faves. it has a max of 1700mhz http://goo.gl/mLUCZ
Click to expand...
Click to collapse
i **** my pants a little when it says "system succesfully corrupted, please freak out now"
MRsf27 said:
i **** my pants a little when it says "system succesfully corrupted, please freak out now"
Click to expand...
Click to collapse
Lol its a joke... its the updater-script you can make it say anything... :laugh:
MRsf27 said:
i **** my pants a little when it says "system succesfully corrupted, please freak out now"
Click to expand...
Click to collapse
ha!
youre not the first
Overclocking past 1.4 Ghz doesn't result in any major usability improvements. I've gone up to 1.7 Ghz and the only thing it does is make my tablet really warm and unstable. All you really need for improving system performance is I/O tweaks to speed up app and page loading, and a little bit of GPU overclocking to help with the transitional effects.
and, to be honest, depending which trinity kernel im using, im using either 1100 or 1150mhz mostly. on a111 im using 1100mhz and on a96 i used 1150mhz. with those speeds everything is still fast but a bit better on battery
Overclocking
If you want a little more information about the the overclocking if you havent already you might want to check out http://forum.xda-developers.com/showthread.php?t=1788759 its the official thread of the trinity kernel for grouper.