Feel Free to post and give feedback ^_^
Also feel free to Vote the thread ^_^
Q&A is in Post 2
_____________________________________
Hi Everyone, Arrow here and this is my guide to find what is the best aosp setup for your evo or android. It is true when people say "every phone is different." However there is an average of people that get similar results. At the moment people have different interest such as some people want performance and some want to improve their battery life. Of course certain people want both but only some get both.
*Remember what i put here is an average and may be different on your evo*
AOSP GB ROM'S: Ok so to start off, these are aosp roms still being updated as of now.
CyanogenMod 7 (CM7) - The most famous aosp rom out there, all or almost all other aosp roms are based off of this rom. This rom has a stable rom and experimental nightly builds. Anyone will tell you that you can't go wrong by choosing this rom. and believe me you will enjoy it.
CyanogenMod 7 Thread
Miui - This rom has the longest battery life and is very customizable. This rom is based off of CM7 and is an excelent rom. However unlike CM7 this rom does not have 4g so if you are willing to sacrifice 4g then believe me this is your rom.
Miui Thread
Gingerbread Evo Deck - Ok so although CM7 is amazing decks gb rom has said to be the exact same thing but giving off better battery life. other then that it is pretty much the same thing with some minor tweaks and some bloat ware removed.
Gingerbread-Evo-Deck's Thread
Xplod E4G - Team Nocturnal designed this rom and it is pretty much CM7 with the Sony Launcher + their apps. This rom will give your phone a nice cool feel that other people don't have. If you like a lot of eye candy then get this rom because it is CM7 just with a different look and feel.
Team Nocturnals Xplod E4G RLS1.2
teh roxxorz said:
using Xplod: there's a 50/50 chance the new tiamat kernels [4.0.7+] may not boot, in that case, they should use 3.3.7.
Click to expand...
Click to collapse
ICS(mod7) - Team Blaze designed this rom and you can consider this rom like Xplod E4G, a rom just like CM7 with some minor tweaks but with a different look and feel. None the less this rom has something very special this is the closest rom to being like ICS (Ice Cream Sandwich). I 100% support this rom because they are doing the best they can to make this rom look and run as smooth as ICS. so if you want to look like your ahead of the game definitely get this rom.
ICS(mod7) Thread
AOSP GB Kernels: These are three kernels that i know of, if you know of more please let me know and i will add them.
Tiamat 4.1.0 - This is the latest kernel made by Tiamat and this is the only aosp kernel still being updated. This kernel on average gives people great performance but lacks on battery life. The main Governor for this kernel is SmartassV2 which is a balanced governor, good to turn on your phone and good to use on a normal day to day bases. For this kernel i do recommend using this governor. It does have SBC and Non-SBC kernels. *Side Note* (Some people say Tiamat 3.3.7 works better for them and is also known as the LEE Kernel because it was awesome like Bruce Lee and looks like Lee backwards [337])
Tiamat Website I also put the Zips in the Attachment (At The Bottom)
Savaged-Zen - This kernel is no longer being updated, however it is still amazing this kernel seems to be Tiamat's competition. Where Tiamat lacks on battery Savaged-Zen does not. However it's performance is not as good as Tiamat. This Kernel comes in two version BFS (Brain F***ed Scheduler) and CFS (Completely Fair Scheduler). BFS is said to give better performance and CFS is the normal kernel. This kernel only comes with SBC however you may download "SVZ Manager" which will allow you to turn SBC on or off. The main governor for this kernel i believe is on demand However i use smartass and a lot of people us InteractiveX.
Savaged-Zen CFS sbc I also put the Zips in the Attachment (At The Bottom)
Savaged-Zen BFS sbc in attachments (At The Bottom)
SVZ Manager I also put the Zips in the Attachment (At The Bottom)
GoDm0de - This Kernel was made by toastcfh and is no longer being updated. It is non-sbc and in my opinion definitely the best non-sbc kernel. This Kernel has insane battery life and a pretty good performance. If you do not want to use an sbc kernel i recommend for you to 100% use this kernel. The Governor for this kernel is set on on demand (i think) however i got the best battery/performance using Interactive.
GoDm0dE Kernel I also put the Zips in the Attachment (At The Bottom)
AOSP ICS ROM'S:
ICS rom by: the_Plattypus and it is still in Alpha testing. however the development for this rom is moving really fast so hopefully a beta will come soon.
EVO 4g Ice Cream Sandwich from source
ICS-evo-deck: This Rom is by kushdeck, After testing out Decks ICS Pre-Alpha 4 & 7 rom i conclude that although it is a alpha it can easily be used as a day to day rom. extremely fast and very snappy. only thing that i found not working was the camera. (Now on Alpha5)
[ROM][ICS][1-11-12][WIP] ics-deck-evo [alpha5]
All Decks ICS Pre-Alphas
All Decks ICS Gapps
AOSP ICS Kernels:
Jaredthegreat ICS - jared has the most advanced ics rom which is in beta 2 but does not have a working camera to check this rom go here:
[ROM's] -ICS- 4.0.1-4.0.3>[AOSP]<--~B.2.0~
Will post them when they are released!!!
Rom Manager/Kernel Manager:
Rom Manager: This is an app from the android market and is extremely useful for pretty much anything. you can back up your rom, you may go into boot loader and you can check if certain roms such as "CM7 Nightlies" have been updated. However people do prefer Amon Ra for flashing, which is another plus of Rom Manager it allows you to flash alternative recovery, which will flash Amon Ra for you.
Kernel Manager: This app was working before but has stopped now, however if it does start working again what it had was pretty much all the kernels that you needed for any rom. this app would allow you to flash a new kernel immediately by going to the kernel you want to flash.
Reserved
Q&A:
Q: What is SBC?
A: SBC stands for super battery charger. SBC is trickle charging, It stops your battery from dropping from 100% to 90% right when you take it off the charger. Some say that it harms your battery but i haven't seen any harm and plus it only costs $5 to get a new battery on Amazon.
Q: How to set up and flash your roms and kernels?
A: well my friend "Crossrocker" made a guide for this with everything you need. so just click to go to his thread. [GUIDE||Oct/23]Best AOSP(CM7|Decks|MIUI) configuration.
Q: What is the difference between governors?
A: This Thread by "RJackson" explains it all:SetCPU governors (explained)
But if you're too lazy to click it here they are:
As explaind by RJackson:
ondemand - Available in most kernels, and the default governor in most kernels. When the CPU load reaches a certain point (see "up threshold" in Advanced Settings), ondemand will rapidly scale the CPU up to meet demand, then gradually scale the CPU down when it isn't needed. - SetCPU website
conservative - Available in some kernels. It is similar to the ondemand governor, but will scale the CPU up more gradually to better fit demand. Conservative provides a less responsive experience than ondemand, but can save battery. - SetCPU website
performance - Available in most kernels. It will keep the CPU running at the "max" set value at all times. This is a bit more efficient than simply setting "max" and "min" to the same value and using ondemand because the system will not waste resources scanning for the CPU load. This governor is recommended for stable benchmarking. - SetCPU website
powersave - Available in some kernels. It will keep the CPU running at the "min" set value at all times. - SetCPU website
userspace
A method for controlling the CPU speed that isn't currently used by SetCPU. For best results, do not use the userspace governor. - SetCPU website
Interactive - The 'interactive' governor has a different approach. Instead of sampling the cpu
at a specified rate, the governor will scale the cpu frequency up when coming
out of idle. When the cpu comes out of idle, a timer is configured to fire
within 1-2 ticks. If the cpu is 100% busy from exiting idle to when the timer
fires then we assume the cpu is underpowered and ramp to MAX speed.
If the cpu was not 100% busy, then the governor evaluates the cpu load over the
last 'min_sample_rate' (default 50000 uS) to determine the cpu speed to ramp down
to.
As explained by MDJ:
SMARTASS GOVERNOR - is based on the concept of the interactive governor.
I have always agreed that in theory the way interactive works - by taking over the idle loop - is very attractive. I have never managed to tweak it so it would behave decently in real life. Smartass is a complete rewrite of the code plus more. I think its a success. Performance is on par with the "old" minmax and I think smartass is a bit more responsive. Battery life is hard to quantify precisely but it does spend much more time at the lower frequencies.
Smartass will also cap the max frequency when sleeping to 245Mhz (or if your min frequency is higher than 245 - why?! - it will cap it to your min frequency). Lets take for example the 998/245 kernel, it will sleep at 245. No need for sleep profiles any more![/QUOTE]
As explained by teh roxxorz:
Lagfree - like the performance governor. It will scale the cpu to higher frequencies when needed, but not to 100% like performance, so you'll get a lil better battery out of it
SmartassV2 - A smarter smartass governor. Code was re-managed/removed to make it more optimized, and have better scaling performances
InteractiveX - a better interactive governor I believe; low scale cpu settings, for texting, browsing, ect, nothing intensive. I wouldn't use it for emulators, ect.
Q: Do you need PRL/Profile/Radio updates? Do you need to go back to sense based to do these still?
A: No you don't have to go back to sense to do these and you don't have to do these because Rom's will come with what you need. None the less if you would like to update your radios here is a thread by "Calkulin" where he keeps the latest radios updated: [ Radios ][ 9-5 ] All EVO Radio, WiMAX, PRI, NV & HBoot versions
Q: Does HDMI mirroring work on these roms?
A: As of this moment Miui and CM7 both have HDMI mirroring working, and sense all the other ones are cm7 with some tweaks they as well have HDMI working however from what i have read the only one that has not had problems with HDMI is Decks Gingerbread Rom
Q: Are all other major features (4G (except for Miui), bluetooth, front & rear camera, GPS, apps such as Netflix, Skype, Google Voice, Sprint Visual voicemail) all working at least as well as on a Sense or stock ROM?
A: Yes everything is working, however on CM7 and i presume on some others you also have to flash a gps fix which you can get from this thread: [GUIDE||Oct/23]Best AOSP(CM7|Decks|MIUI) configuration. and the Voicemail seems to have some issues for some people but works flawlessly on Decks with it's gapps + Voicemail which you may also get from this thread: [GUIDE||Oct/23]Best AOSP(CM7|Decks|MIUI) configuration.
Q:My wifi is connecting/disconnecting after a second, what should i do?
A: This answer was given to me by "teh roxxorz." This has nothing to do with your rom or kernel, do this:
Back up everything into Titanium Backup
Boot into recovery
wipe cache, Dalvik, and pretty much everything
reflash your rom,kernel and gapps (or if you would like to check out some other roms and kernels just click on the link in my sig)
once you've set up your phone download Titanium Backup from the market
in titanium backup restore all your apps ONLY!!! (don't get apps w/ data - only get apps, and do not get system data)
after this your wifi should be working just fine
Q: I am having wake issues?
A: Here is a Guide made by JBabey[FIX] Wake Issue (Android OS) - Combination of Radio/PRI/NV/Wimax/GPS !Solved!
Q: Can i make my 3g speed faster?
A: Yes, This answer was given to me by teh roxxorz:
You need to flash a sprint sense rom. I emphasize sprint because it won't work on the sense 3.5 roms, as they're all ports of other non sprint roms.
1. Flash sense rom
2. Obtain your msl, download msl reader from market, use it, write it down
3. type in ##3282# , input your msl (you can get this from the app msl reader)
4. Click edit mode > advanced
5. Scroll down to HHTD proxy port and address
6. Change the proxy port to 0 and proxychange the address to 0.0.0.
Q: How can I fix my GPS?
A: This answer was given to me by teh roxxorz:
- flash a sense rom
- open up the dialer
- Type ##GPSCLRX# or ##4772579#
- Your enter your MSL at the prompt
- Your phone will soon reboot > done
Q: Is there a guide like this but for sense roms?
A: Yes if you are looking for a sense guide rather than aosp then check out this thread by tropicalbrit
Q: What is your setup at the moment?
A: Rom - Decks 4.0.3 Pre-Alpha 7 ICS Rom
Kernel - Stock
Governor - Conservative
CPU Max/Min Frequency - 729/128
IncrediControl (app) - (-100) [I get to (-100) by first doing (-75) and leaving it there for 3 days and then I do another (-25)]
Car-o-Dope (CoD) setup
Nice setup. Thanks
Sent from my PC36100 using xda premium
Steven 1 said:
Nice setup. Thanks
Sent from my PC36100 using xda premium
Click to expand...
Click to collapse
and thank you for such a quick reply ^_^
Not too bad. Good thing on steering them to tiamat. Lemme know if you need anything.
teh roxxorz said:
Not too bad. Good thing on steering them to tiamat. Lemme know if you need anything.
Click to expand...
Click to collapse
lol i was about to message you to check out this thread, but actually i do need something. do you happen to know a description of: lagfree, smartassV2, and interactiveX? or at least where i can get one?
Green_Arrow said:
lol i was about to message you to check out this thread, but actually i do need something. do you happen to know a description of: lagfree, smartassV2, and interactiveX? or at least where i can get one?
Click to expand...
Click to collapse
Lagfree - like the performance governor. It will scale the cpu to higher frequencies when needed, but not to 100% like performance, so you'll get a lil better battery out of it
SmartassV2 - A smarter smartass governor. Code was re-managed/removed to make it more optimized, and have better scaling performances
InteractiveX - a better interactive governor I believe; low scale cpu settings, for texting, browsing, ect, nothing intensive. I wouldn't use it for emulators, ect.
Also, you should also disclose to people using Xplod: there's a 50/50 chance the new tiamat kernels [4.0.7+] may not boot, in that case, they should use 3.3.7.
And any reason you were gona message me?
teh roxxorz said:
Lagfree - like the performance governor. It will scale the cpu to higher frequencies when needed, but not to 100% like performance, so you'll get a lil better battery out of it
SmartassV2 - A smarter smartass governor. Code was re-managed/removed to make it more optimized, and have better scaling performances
InteractiveX - a better interactive governor I believe; low scale cpu settings, for texting, browsing, ect, nothing intensive. I wouldn't use it for emulators, ect.
Also, you should also disclose to people using Xplod: there's a 50/50 chance the new tiamat kernels [4.0.7+] may not boot, in that case, they should use 3.3.7.
And any reason you were gona message me?
Click to expand...
Click to collapse
pretty much so you can check it out and see if it was good, you seem to post everywhere i do and you seem to know a lot.
Green_Arrow said:
pretty much so you can check it out and see if it was good, you seem to post everywhere i do and you seem to know a lot.
Click to expand...
Click to collapse
Maybe there's a case of a stalker?! [kidding]
Though glad I could help. And thank you.
teh roxxorz said:
Maybe there's a case of a stalker?! [kidding]
Though glad I could help. And thank you.
Click to expand...
Click to collapse
No problem ^_^
Green_Arrow said:
No problem ^_^
Click to expand...
Click to collapse
Tis all good.
has anyone tried that ICS(mod7) rom?
Helpful threads for the win, thanks mr arrow
Sent from my PC36100 using xda premium
Nice helpful thread , I like that you attached the kernels seeing that a lot of people these days are always asking for links to them.
linsalata28 said:
Nice helpful thread , I like that you attached the kernels seeing that a lot of people these days are always asking for links to them.
Click to expand...
Click to collapse
thank you, and yea it was a pain for me to find them just to attach them lol
Toney Starks said:
Helpful threads for the win, thanks mr arrow
Sent from my PC36100 using xda premium
Click to expand...
Click to collapse
no problem ^_^
Green_Arrow said:
no problem ^_^
Click to expand...
Click to collapse
You could have asked I keep all of them just incase.
Edit: I quoted the wrong post lol.
I was talking about the kernels.
cnstarz said:
has anyone tried that ICS(mod7) rom?
Click to expand...
Click to collapse
i actually did, it runs really smooth and i believe atm everything is working. if there is anything wrong with it, then it was something cm7 did because it is the same thing with a few tweaks and a different look.
linsalata28 said:
You could have asked I keep all of them just incase.
Edit: I quoted the wrong post lol.
I was talking about the kernels.
Click to expand...
Click to collapse
oh lol i was like huh , and well now i know lol
Hi,
Thanks for guide... I am considering changing from
my stock rooted ROM, so very timely for me!
Some features that you don't mention or summarize
that may help me and others.
PRL/Profile/Radio updates? I believe you need to
go back to sense based to do these still? [yuk]
HDMI mirroring?
Are all other major features (4G (except for Miui),
bluetooth, front & rear camera, GPS, apps such as
Netflix, Skype, Google Voice, Sprint Visual voicemail)
all working at least as well as on a Sense or stock ROM?
Thanks in Advance,
Peter
Related
I'm torn between the two kernel's. Through your own experience, which kernel is better for performance and which for battery life? with the cm7 stock kernel i can get around 2700 in quadrant at 1.5ghz but i heard people were getting scores in the 3000's with the faux kernel?
Any help would be greatly appreciated!
P.S. why do i seem to get lower scores on performance governor than ondemand?
Faux is what I use. Don't base your phone on quadrant. Its like cake. Looks delucous.. but the cake is a lie.
Its a general idea of a phones performance.. not the end all be all.
Both work well... but faux has newer wifi drivers that greatly increase range and performance.
Sent from my HTC Glacier using XDA App
xdmds said:
I'm torn between the two kernel's. Through your own experience, which kernel is better for performance and which for battery life? with the cm7 stock kernel i can get around 2700 in quadrant at 1.5ghz but i heard people were getting scores in the 3000's with the faux kernel?
Any help would be greatly appreciated!
P.S. why do i seem to get lower scores on performance governor than ondemand?
Click to expand...
Click to collapse
as stated above Quadrant Standard is just a starting point. It lead nothing to the true facts of how well a phone preforms.
Couple of things to consider.
1) Zinx has created CM7 around the kernel that is installed with the ROM. If you need help you will get more help directly from the developer using their kernels, This goes for any ROM.
2) If you opt'd into the feedback program you will be doing so with false information. You'll be giving feedback based on "product a" when in all honesty your using "product b"
3) overclocking the phone is not always the best thing to do. Sure it's nice to show off and say "hey looky what i can do" but when the rubber meets the road their is no real benefit other than cooking the battery. And keep in mind what happens to things when they get hot, they expand. And when you are pumping that much extra into and out of a processor they will expand which will wear and tear on the motherboard and solder joints.
Personally i'd just keep the stock kernel @ keep it at most 1017 unless you plan on showing off, then moving back ASAP. and for what it's worth i typically run my MyTouch @ 768Mhz.
neid, 2 questions!
1. I want to underclock to 768 as well (never messed with CPU settings before) on CM7 RC3 using the system built in setting not set cpu, have you seen any performance degradation?
2. when I revert back to stock from my nandroid, would the CPU be throttled back to default settings or will it stay at 768?
Thanks
kpdadroid said:
neid, 2 questions!
1. I want to underclock to 768 as well (never messed with CPU settings before) on CM7 RC3 using the system built in setting not set cpu, have you seen any performance degradation?
2. when I revert back to stock from my nandroid, would the CPU be throttled back to default settings or will it stay at 768?
Thanks
Click to expand...
Click to collapse
1) on my phone, i use 768Mhz day in and day out, Fruit Ninja, Angry birds, Browser, dialer, navigating the phone in general everything performs EXTREMELY well. I've not had any complaints. just go to settings > cyanogen > performance > CPU > max > 768. Since Cyanogen is a lightweight ROM it doesn't have to push though all the bloat that MySense brings so we can scale it back and still get good results.
i personally do not care for Quadrant scores. but i know some people live by them so i've attacthed a 768Mhrz and a 1016Mhrz Quad score. The names will be the set speed.
2) the CPU speed will revert back to what ever you have it set as on that ROM. So if you left it 1017 in your Nanadroid it'll be 1017 when you flash the restore.
Hello all!
Just upgraded my wife from the MyTouch 3G Slide to the G2 as she has to have a keyboard and we were on our 5th replacement Slide. So, as she is not the geek that I am, she will not be constantly flashing new ROMs and such. However, I am going to at least install the latest CM and I am looking for kernel suggestions. I already have root, s-off, new hboot, and all that, I'm just waiting for CM7 to finish downloading.
I started using Android with the G1 and constantly updating Radios, as well as ROMs and I currently use a Samsung Vibrant running a TeamWhiskey ROM. It's stable as anything, I like the theme, and CM7 still has some broken stuff on the Vibrant. I'm glad to see that Eugene recently picked up a G2 as he made some bad ass kernels and ROMs for the Vibrant.
So, let's here those kernel recommendations and why you recommend them.
Thanks!
Well am currently using mexdroidmod and their kernel is pretty awesome because its fast and stable. My best advice is to test the diffrent kernel and read through the tread, see what people say about it. All the kernels I have tried are all awesome so you should try them
Sent from my HTC Vision using XDA Premium App
pershoot's kernel. great batt life and OCing
Umaro's kernel has been rock solid for me and has tons of features as well. You can OC all the way to 1.9 Ghz if you so please and it has smartass.
well considering your wife isn't much of a techie.. i say you should go with pershoots kernel because he's always releasing updates and i've never had a problem with any of them. the battery life is excellent if you use the right radio (.17 and .30 have been good to me), but you need to experiment with this though. the phone runs beautifully, just make sure you use superwipe+ to format/wipe so you don't end up with gps issues like many people have had, good luck!
I've run umaro, eugene, pershoot, flippy, pyro, etc etc... aaand I've decided that the provided kernel is pretty much good to go. yeah, there are some little trinkety things with a few of the above kernels that the standard CM7 kernel doesn't support... but honestly, they're worthless to a user who just wants to turn the phone on and have it work.
set her up with the stock kernel @ 245-1017 (I haven't found a reason yet to ditch the ondemand governor, it seems to work best with CM7) and a vanilla gingerbread launcher and she'll be blown away.. that's my $.02
Like said above, CM kernel is great. I've tried most or even all available kernels for CM and finaly decided to stick with original one. It's stable and supports OC (up to 1.5GHz) "out of box", so really, I see no single reason to use the other ones.
Sent from my HTC Vision using XDA App
AllWin said:
Like said above, CM kernel is great. I've tried most or even all available kernels for CM and finaly decided to stick with original one. It's stable and supports OC (up to 1.5GHz) "out of box", so really, I see no single reason to use the other ones.
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
I'm also thinking about changing the kernal, but only for smartass. Does smartass offer that much of an increase on battery life or anything else? Also, when you OC, do you use SetCPU or just CyanogenMod Settings?
slapshot30 said:
I'm also thinking about changing the kernal, but only for smartass. Does smartass offer that much of an increase on battery life or anything else? Also, when you OC, do you use SetCPU or just CyanogenMod Settings?
Click to expand...
Click to collapse
not at all pooping on any of the guys who swear by smartass/other governors, but the change in battery life is almost unnoticable for me.. the change in performance however can be pretty apparent.
here's my problem with "battery saving" governors:
in order to save battery, these governors are supposed to be more intelligent about which frequencies they select once a task is called... well, that's all well and dandy, but the problem is that the majority of battery-hogging apps (ie streaming music/video, gaming, browsing for a long time, being on the phone, etc) are still going to be battery hogs with or without a fancy governor. the governor isn't capable of making an app that needs a lot of processing power run well at a lower frequency, it can only try to be more selective about which frequencies it uses in order to attempt to save battery life.
additionally, most people use their phones like this: phone is idle (ie screen off), and a call arrives. call ends, phone is back to idle. texting a few people, back to idle. playing a game for 15 minutes, back to idle.
is it really logical to assume that these short bursts of activity are going to benefit at all from a fancy shmancy governor? I doubt it.
I still swear by ondemand or interactive (both work well for me) thru built-in settings if possible (ie cyanogen performance settings). second choice would be setcpu with no profiles (unless you're overclocking heavily, then you should at least have a temp warning profile). at this point, screen-off profiles don't do a damn bit of good, because pretty much every kernel we have for the vision is going to scale down during inactivity.
I have moved from CM7 to Hombase 5.4, and found that setcpu no longer seems to do anything. on CM7 it worked as i had hoped, underclocking the phone when i was doing low intensity stuff like texting, and pushing it up to full power for videos etc. now it does nothing but tell me core temps, which are always high as its always running at 1Ghz.
Can anyone explain how to get it back to underclocking?
Many Thanks
Try a different kernel.
Sent from my CM860
ishamm said:
I have moved from CM7 to Hombase 5.4, and found that setcpu no longer seems to do anything. on CM7 it worked as i had hoped, underclocking the phone when i was doing low intensity stuff like texting, and pushing it up to full power for videos etc. now it does nothing but tell me core temps, which are always high as its always running at 1Ghz.
Can anyone explain how to get it back to underclocking?
Many Thanks
Click to expand...
Click to collapse
This is a known issue with the OC faux kernel. I was running into the same problem with his enhanced stock kernel after using webtop. After reflashing the enhanced stock 0.2.0 it would still get stuck at max 1Ghz after using webtop, but a reboot would get the underclocking working again.
I only tried the webtop hack to see if I could get it working. I haven't gone back into it at all so I don't know if this is something that will reoccur. Although I will say that with my day to day use I have not run into any clocking issues since.
Thanks, is there a page somewhere which details which kernels do what and which would work with my rom?
Sent from my MB860 using xda premium
ishamm said:
Thanks, is there a page somewhere which details which kernels do what and which would work with my rom?
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
This is the page for faux's kernels. As far as details, start reading and searching through that thread as well as the threads for any ROMS you are using. 99% of the time people will either have the same problem (and possible fix), the other 1% of the time they will identify a bug (i.e. maxed out CPU).
Keep in mind faux does have different kernels for Froyo, GB, and CM7.
For some reason even if I move the slider from 1300my to 1000, when I touch the screen with at least 3 fingers for a few seconds it pegs out at 1300. I read our cpu's are daisy chained so to speak
so the 2nd core kicks in when needed. I tried cpu tuner and it gives the option to powersave and only use one core or if you choose performance it will allow Both cores. Just might be setcpu isn't designed fully for our dual core setup.
thanks for the link to kernels, but i cant find one for HomBase, or a Kernel only download on the homebase thread. i have the Version2, which has some blur, but only the 1.0Ghz clock kernel. where could i get the 1.3GHz download by itself, to see if that might help, as its the one CM7 had iirc
Thanks
ishamm said:
thanks for the link to kernels, but i cant find one for HomBase, or a Kernel only download on the homebase thread. i have the Version2, which has some blur, but only the 1.0Ghz clock kernel. where could i get the 1.3GHz download by itself, to see if that might help, as its the one CM7 had iirc
Thanks
Click to expand...
Click to collapse
Get the 1.3 from the faux thread that I linked to. They're in the very first post...
CM7 is the only ROM that has its own custom faux kernel. For all other ROMS just match the kernel to the build the ROM is based off of (Froyo or GB). If you're using V.2 of Homebase then use the GB one.
Update: Also, there are other kernels out there. I was only using faux's as an example since you were using CM7 and Homebase.
thanks, ive now got the 1.3Ghz kernel installed successfuly, but it still seems like setcpu will not underclock. i dont know if its normal, but the "Scaling" option is greyed out, and i cant get access to the Advanced tab. is there something im doing wrong in setcpu itself?
thanks again
ishamm said:
thanks, ive now got the 1.3Ghz kernel installed successfuly, but it still seems like setcpu will not underclock. i dont know if its normal, but the "Scaling" option is greyed out, and i cant get access to the Advanced tab. is there something im doing wrong in setcpu itself?
thanks again
Click to expand...
Click to collapse
Lack of underclocking is a known issue with the latest OC kernel. I'm unclear whether it's actually a bug with the kernel or with setCPU not supporting dual core devices. But yeah, there's a problem with it right now. I'm on the stock enhanced, and other than the webtop issue I mentioned above, it works fine.
Scaling/advanced are not available, this is something that is determined by the kernel you are using not the app.
ok so if i understand you right i would be best off using the stock enhanced kernel (for now), as it will underclock fine?
ishamm said:
ok so if i understand you right i would be best off using the stock enhanced kernel (for now), as it will underclock fine?
Click to expand...
Click to collapse
It's working perfectly for me, except after webtop use (which I don't normally use).
I'm still having the same issues regardless of weather I choose power save or performance it will not underclock, and those are the only governors I get the option of :s
Sent from my MB860 using xda premium
which kernel out there is the best right now? in battery life and speed
theres only one that fits best battery and fastest.. trinity kernel.
I like Trinity but Motley also did very well for me.
Sent from my Nexus 7 using Tapatalk 2
simms22 said:
theres only that fits best battery and fastest.. trinity kernel.
Click to expand...
Click to collapse
This^ look at it this way. The nexus allready has great performance, it will handle any game you throw at it. (Unless not optimized for tegra 3) so wht else do you need? A kernel that gives amazing battery life. And what kernel is that..... \l/ TRINITY \l/
Sent from my Nexus 7 using xda premium
TRINITY without a doubt!!! Fast as hell and almost unbelievable battery life!
Sent from my Trinity powered Nexus 7 using Xparent Blue Tapatalk 2
Trinity IMHO....
Sent from my Nexus 7 using xda premium
battery right now..
speed..
Ill say motley. I tried trinity kernel. Its good. But I getbetter performance,stability, and battery life with motley. All these battery screen shots really mean nothing. Why? Because none show real heavy use. I can easily get the same stats or better with light to moderate use. Show me some stats showing 8-10+ hrs of screen on time. With some heavy app or game usge. Anyone can use device for a few hours. Then leave it in deep sleep and show the same or better stats.
I've tried all the kernels out so far. They are all good. Its a matter of personal preference of features you want. Some pack things others don't. MOTLEY 'S ATM is the only linaro based kernel. So its using new additions/components. Better optimized. Benchmarks are cool but its real world performance that matters most.
I'm running stock rom with motley latest linaro based kernel with Zram, then CPU overclock @ 1.624ghz and gpu overclock @ 520mhz. I'm also undervolted -75mV across the board. So my temps stay low. Which equates to my device running at a higher performance speed longer.
The best thing about stock rom is I can measly flash different kernels and not have to worry about flashing a rom and setting my apps n all THST all over again. I can flash a kernel with no wipes and be good. Plus stock rom is the most stable ATM. Can't lie though, I am anxious to flash some roms. THST paranoid Android one looks really good. Along with the pure linaro based rom. That's the great thing about choices.
Its not a matter of who has the best kernel. Its more about what you looking for in features and personalizing your device to cater to our needs.
Asking who has the best kernel is like asking who is the best developer on xda. I don't think that's fair to the developers as they ALL work hard on roms or kernels. Forget the popularity contests.
THEY ALL THE BEST lol. Some are just more seasoned than others. Which is OK. I love the fact we have variety of things to choose from. I've been impressed with trinity kernel, based on scores I've been seeing. But I'm also impressed with faux kernel and its a more straight forward one with lots of new Linux commits and additions. All the kernels have a personality of their own. I love the fact that twrp makes it very easy n simple to try out any kernel I want for nexus7. No matter who makes it. Every developer has its followers. You also have people who like to try out different setups.
Choice is a good thing! That's what I love about Android.
I've got to say for me trinity is the best kernel for the Nexus 7, updated daily and great communication with the dev makes this an awesome kernel. The trinity toolbox app is the icing on the cake.
demandarin said:
Ill say motley. I tried trinity kernel. Its good. But I getbetter performance,stability, and battery life with motley. All these battery screen shots really mean nothing. Why? Because none show real heavy use. I can easily get the same stats or better with light to moderate use. Show me some stats showing 8-10+ hrs of screen on time. With some heavy app or game usge. Anyone can use device for a few hours. Then leave it in deep sleep and show the same or better stats.
I've tried all the kernels out so far. They are all good. Its a matter of personal preference of features you want. Some pack things others don't. MOTLEY 'S ATM is the only linaro based kernel. So its using new additions/components. Better optimized. Benchmarks are cool but its real world performance that matters most.
I'm running stock rom with motley latest linaro based kernel with Zram, then CPU overclock @ 1.624ghz and gpu overclock @ 520mhz. I'm also undervolted -75mV across the board. So my temps stay low. Which equates to my device running at a higher performance speed longer.
The best thing about stock rom is I can measly flash different kernels and not have to worry about flashing a rom and setting my apps n all THST all over again. I can flash a kernel with no wipes and be good. Plus stock rom is the most stable ATM. Can't lie though, I am anxious to flash some roms. THST paranoid Android one looks really good. Along with the pure linaro based rom. That's the great thing about choices.
Its not a matter of who has the best kernel. Its more about what you looking for in features and personalizing your device to cater to our needs.
Asking who has the best kernel is like asking who is the best developer on xda. I don't think that's fair to the developers as they ALL work hard on roms or kernels. Forget the popularity contests.
THEY ALL THE BEST lol. Some are just more seasoned than others. Which is OK. I love the fact we have variety of things to choose from. I've been impressed with trinity kernel, based on scores I've been seeing. But I'm also impressed with faux kernel and its a more straight forward one with lots of new Linux commits and additions. All the kernels have a personality of their own. I love the fact that twrp makes it very easy n simple to try out any kernel I want for nexus7. No matter who makes it. Every developer has its followers. You also have people who like to try out different setups.
Choice is a good thing! That's what I love about Android.
Click to expand...
Click to collapse
1. trinity kernel has been using linaro since april of 2011, on the nexus s, the gnex, and now the nexus 7.
2. zram is a placibo. theres nothing there
3. stock rom is good, but i prefer a pure aosp build. no, they are not the same.
4. and the last two paragraphs are the absolute truth.
5. really, you should try them all, let your device tell you which kernel it likes the best
simms22 said:
1. trinity kernel has been using linaro since april of 2011, on the nexus s, the gnex, and now the nexus 7.
2. zram is a placibo. theres nothing there
3. stock rom is good, but i prefer a pure aosp build. no, they are not the same.
4. and the last two paragraphs are the absolute truth.
5. really, you should try them all, let your device tell you which kernel it likes the best
Click to expand...
Click to collapse
Thing with zram is, its not for getting higher benchmark scores or immediate performance. Its more so for heavy multitasking. Is been proven to help. The placebo is on people who think its supposed to provide some immediate result. If someone is a heavy multitasker on their device, then zram would benefit them. If you not much of a multitasker, then zram will show no Bendix for you.
You are right though, about trying out different kernels and such. Pure aosp rom sounds good. I just hate having to reset up my apps n stuff. I know titanium good for that but me personally, I'm waiting for roms to mature more and have most things, of not everything working. All roms so far seem to have something not working yet. Which is fine. Nature of the beast.
I think I might give trinity kernel another try. I did buy the tkt app. But never used it in conjunction with the kernel. I bought it just for the automatic script it runs..lol plus to show support. I heard tkt app works best with trinity kernel plus allows you to tweak features only in trinity kernel.
Ill download the latest build Trinity has and see what's up. Performance and better battery life is always a good thing. Its gpu is overclocked to 520mhz also?
Trinity HANDS DOWN its been 3 hours on sleep and ITS still at 100%! + the ridiculous speed along with the power saving features. I may be new to the Nexus 7 scene but this is hands down to godly .
demandarin said:
Thing with zram is, its not for getting higher benchmark scores or immediate performance. Its more so for heavy multitasking. Is been proven to help. The placebo is on people who think its supposed to provide some immediate result. If someone is a heavy multitasker on their device, then zram would benefit them. If you not much of a multitasker, then zram will show no Bendix for you.
You are right though, about trying out different kernels and such. Pure aosp rom sounds good. I just hate having to reset up my apps n stuff. I know titanium good for that but me personally, I'm waiting for roms to mature more and have most things, of not everything working. All roms so far seem to have something not working yet. Which is fine. Nature of the beast.
I think I might give trinity kernel another try. I did buy the tkt app. But never used it in conjunction with the kernel. I bought it just for the automatic script it runs..lol plus to show support. I heard tkt app works best with trinity kernel plus allows you to tweak features only in trinity kernel.
Ill download the latest build Trinity has and see what's up. Performance and better battery life is always a good thing. Its gpu is overclocked to 520mhz also?
Click to expand...
Click to collapse
im not sure if gpus oc...but when u underclock..theres absolutely no performance difference..and saves battery too! 102mhz-1100mhz on demand/deadline..god like battery life. 4 hours screen time...still 45% left...shouldve been more if i didnt flash roms in between battery life. also under clocked, gta 3 and cs portable runs great and smooth still.
thanks to simms, I tried out trinity again. I flashed the latest builds. ran some benchmarks. for some reason, my device doesn't like the highest speed on benchmarks. it kept rebooting during them. so I stayed at 1.5ghz. governor I used was performance and on demand. for scheduler I ran with deadline. i forced cpu online and put fysnc on faster, thanks to TKT app. on quadrant, I was more concerned with seeing if I could achieve those crazy high I/O scores. which I did. my overall score was good but I've gotten higher on motley. it could be higher on this kernel if I get the 1.6ghz+ speed to stick. I was more impressed with my rl sqlite benchmark test. scored 18 seconds overall. which blows away the competition.
so I'm impressed with latest version of kernel. definitely better than the older build I ran of it from before. some things I've noticed though. where is the ability to undervolt at? no option in tkt app and the voltages tab disappeared from system tuner. also, this build gpu isn't overclocked. or might be better for me to say its definitely not running at 520mhz. I could tell this by the fps from quadrant. its running 59-60fps. on motley with 520mhz gpu I get 70-80+fps. just some things I noticed. not necessarily drawbacks. kernel runs very good. just got to figure how to make higher speed stick. since I can't seem to adjust voltages on this build, I can't increase voltage or undervolt it. if this can be done on trinity kernel, let me know how. its not showing voltages in tkt app or system tuner.
overall very good kernel. will run it for a while to see how battery life is. I will likely underclock it like above poster mentioned for best battery life. I noticed nexus 7 still runs great underclocked. no lag.,no matter what kernel I'm using.
I've attached screenshots of my benches on latest trinity overclocked @ 1.5ghz. I know my device can take 1.6ghz cuz on motley I can run the speed fine, even through benches. so have to see why its not taking on trinity kernel. maybe voltage needs to be increased.
so it doesnt matter if trinity is still in experimental? its that good? i guess ill try that one out
demandarin said:
thanks to simms, I tried out trinity again. I flashed the latest builds. ran some benchmarks. for some reason, my device doesn't like the highest speed on benchmarks. it kept rebooting during them. so I stayed at 1.5ghz. governor I used was performance and on demand. for scheduler I ran with deadline. i forced cpu online and put fysnc on faster, thanks to TKT app. on quadrant, I was more concerned with seeing if I could achieve those crazy high I/O scores. which I did. my overall score was good but I've gotten higher on motley. it could be higher on this kernel if I get the 1.6ghz+ speed to stick. I was more impressed with my rl sqlite benchmark test. scored 18 seconds overall. which blows away the competition.
so I'm impressed with latest version of kernel. definitely better than the older build I ran of it from before. some things I've noticed though. where is the ability to undervolt at? no option in tkt app and the voltages tab disappeared from system tuner. also, this build gpu isn't overclocked. or might be better for me to say its definitely not running at 520mhz. I could tell this by the fps from quadrant. its running 59-60fps. on motley with 520mhz gpu I get 70-80+fps. just some things I noticed. not necessarily drawbacks. kernel runs very good. just got to figure how to make higher speed stick. since I can't seem to adjust voltages on this build, I can't increase voltage or undervolt it. if this can be done on trinity kernel, let me know how. its not showing voltages in tkt app or system tuner.
overall very good kernel. will run it for a while to see how battery life is. I will likely underclock it like above poster mentioned for best battery life. I noticed nexus 7 still runs great underclocked. no lag.,no matter what kernel I'm using.
I've attached screenshots of my benches on latest trinity overclocked @ 1.5ghz. I know my device can take 1.6ghz cuz on motley I can run the speed fine, even through benches. so have to see why its not taking on trinity kernel. maybe voltage needs to be increased.
Click to expand...
Click to collapse
there are more features that are going to be added, theyre being added all the time. ask gnex owners how the options grew(same app btw, different devices running trinity see different features in the app. so you purchase it once, and use it on multi devices. btw, voltage adjustment will be added, remember how new development is on the n7. also, if other developers added the options into their kernels, theyed be able to use those features with their kernels
---------- Post added at 09:20 PM ---------- Previous post was at 09:11 PM ----------
azoller1 said:
so it doesnt matter if trinity is still in experimental? its that good? i guess ill try that one out
Click to expand...
Click to collapse
thats just trinitys method of rotating the kernels.. starts off in experimental(every kernel is tested to boot and run before it every appears here), then it graduates to prerelease if it makes the cut, and then if you guys like it it makes its way to release. its just that trinity development is so new here that there isnt a prerelease yet
jarjar124 said:
im not sure if gpus oc...but when u underclock..theres absolutely no performance difference..and saves battery too! 102mhz-1100mhz on demand/deadline..god like battery life. 4 hours screen time...still 45% left...shouldve been more if i didnt flash roms in between battery life. also under clocked, gta 3 and cs portable runs great and smooth still.
Click to expand...
Click to collapse
I've underclocked mines to 1.1ghz also. battery doesn't want to budge from 100% so far..lol. it's barley sipping battery. the UI and browser is fluid n smooth at this underclock. which is a good thing. the real test will come once I play nova3 shortly. if it plays lag free on this lower speed then underclocking is a winner. I set my governor to interactive though. you get better battery life than ondemand. using deadline also. with fsync set to faster.
simms22 said:
there are more features that are going to be added, theyre being added all the time. ask gnex owners how the options grew(same app btw, different devices running trinity see different features in the app. so you purchase it once, and use it on multi devices. btw, voltage adjustment will be added, remember how new development is on the n7. also, if other developers added the options into their kernels, theyed be able to use those features with their kernels
---------- Post added at 09:20 PM ---------- Previous post was at 09:11 PM ----------
thats just trinitys method of rotating the kernels.. starts off in experimental(every kernel is tested to boot and run before it every appears here), then it graduates to prerelease if it makes the cut, and then if you guys like it it makes its way to release. its just that trinity development is so new here that there isnt a prerelease yet
Click to expand...
Click to collapse
I understand nexus 7 is still infancy, developement wise. its cool. just wondering if those features were included since the option disappeared. I could undervolt or increase voltage on motley kernel. the tkt app would let me do it on THST kernel as the section shows for it. but I like using system tuner for undervolting when I was on motleys kernel. can't wait to see what new features get added. plus once I get my new phone, hopefully there'll be a trinity kernel out for it so I can use tkt app with it. the build is very good.
demandarin said:
thanks to simms, I tried out trinity again. I flashed the latest builds. ran some benchmarks. for some reason, my device doesn't like the highest speed on benchmarks. it kept rebooting during them. so I stayed at 1.5ghz. governor I used was performance and on demand. for scheduler I ran with deadline. i forced cpu online and put fysnc on faster, thanks to TKT app. on quadrant, I was more concerned with seeing if I could achieve those crazy high I/O scores. which I did. my overall score was good but I've gotten higher on motley. it could be higher on this kernel if I get the 1.6ghz+ speed to stick. I was more impressed with my rl sqlite benchmark test. scored 18 seconds overall. which blows away the competition.
so I'm impressed with latest version of kernel. definitely better than the older build I ran of it from before. some things I've noticed though. where is the ability to undervolt at? no option in tkt app and the voltages tab disappeared from system tuner. also, this build gpu isn't overclocked. or might be better for me to say its definitely not running at 520mhz. I could tell this by the fps from quadrant. its running 59-60fps. on motley with 520mhz gpu I get 70-80+fps. just some things I noticed. not necessarily drawbacks. kernel runs very good. just got to figure how to make higher speed stick. since I can't seem to adjust voltages on this build, I can't increase voltage or undervolt it. if this can be done on trinity kernel, let me know how. its not showing voltages in tkt app or system tuner.
overall very good kernel. will run it for a while to see how battery life is. I will likely underclock it like above poster mentioned for best battery life. I noticed nexus 7 still runs great underclocked. no lag.,no matter what kernel I'm using.
I've attached screenshots of my benches on latest trinity overclocked @ 1.5ghz. I know my device can take 1.6ghz cuz on motley I can run the speed fine, even through benches. so have to see why its not taking on trinity kernel. maybe voltage needs to be increased.
Click to expand...
Click to collapse
Interesting, 70-80fps, more than the panel.
You were interested in battery in an earlier post, this is me feeling meh and couching most of Sunday.
EDIT: Yes, emailing, tapatalk, browsing for laptop and not finding any, reading news in Pulse and flipboard, tweetcaster and testing slice(s?), gtalk, not heavy usage obviously. Screen wasn't on unless The Seven was used though.
Sent from my Nexus 7 using Tapatalk 2
morfic said:
Interesting, 70-80fps, more than the panel.
You were interested in battery in an earlier post, this is me feeling meh and couching most of Sunday.
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
what is this?? 7hrs screen time and 30%??
jarjar124 said:
what is this?? 7hrs screen time and 30%??
Click to expand...
Click to collapse
Expect no less.
Hi,
Is the cloudy kernel the best for pure performance in terms of lag? Not looking for battery or other performance enhancements.
Is cloudy kernel 1.5 the latest ( just to make sure i have a backup kernel to re-install just on case)?
Is the tweak on hidden menu for HIGH TEMPERATURE still relevant with these kernels?
I am running with ondemand governor.
And just to make sure:
- to install a new kernel i just boot to recovery and flash the kernel without any wipes, right?
- i have xposed and some G2 tweaks running, i don't need to disable/reset or anything?
Thanks for your help! I am still learning.
Nico.
bloof said:
Hi,
Is the cloudy kernel the best for pure performance in terms of lag? Not looking for battery or other performance enhancements.
Is cloudy kernel 1.5 the latest ( just to make sure i have a backup kernel to re-install just on case)?
Is the tweak on hidden menu for HIGH TEMPERATURE still relevant with these kernels?
I am running with ondemand governor.
And just to make sure:
- to install a new kernel i just boot to recovery and flash the kernel without any wipes, right?
- i have xposed and some G2 tweaks running, i don't need to disable/reset or anything?
Thanks for your help! I am still learning.
Nico.
Click to expand...
Click to collapse
Hello Nico.
I'm hoping that I can assist you with this topic.
First off, regarding the kernel you have plenty of choices. There are two, however, that I'd recommend.
1. Dorimanx Kernel. That kernel is absolutely amazing with LOTS of tweaks, thermal protection, ad-blocker, allows overclocking to 2.8Ghz and much much more. I can't list all the features because they are so many. But there's one thing in particular - it's fast. Dorimanx has created a hybrid kernel from 3.4.xxx and 3.10.y source codes. This is my go-to kernel.
2. Bruce Kernel. It's a modified stock kernel with Bruce's own tweaks. It's fast, very battery friendly but lacks customisation. It also doesn't have thermal protection or any thermal throttling.
Now to your other questions:
Yes, Cloudy 1.5 should be the latest.
I wouldn't mess with the ROM thermal protection found in hidden menu. The gain in speed is most likely negligible but you make your phone more prone to heat damage.
Ondemand governor is great for smoothness, but you'll have a ton of options if you decide to use dorimanx. I use alucard because it's the sweet spot between amazing battery performance and smoothness.
You can install a new kernel without any wipes. Kernel doesn't interfere with ROM as such and you don't have to disable anything. A Kernel is basically what makes software and hardware work together.
I hope this helps!
vPro97 said:
Hello Nico.
I'm hoping that I can assist you with this topic.
First off, regarding the kernel you have plenty of choices. There are two, however, that I'd recommend.
1. Dorimanx Kernel. That kernel is absolutely amazing with LOTS of tweaks, thermal protection, ad-blocker, allows overclocking to 2.8Ghz and much much more. I can't list all the features because they are so many. But there's one thing in particular - it's fast. Dorimanx has created a hybrid kernel from 3.4.xxx and 3.10.y source codes. This is my go-to kernel.
Click to expand...
Click to collapse
Thanks a lot for your answers, these are exactly what I was looking for.
I just flashed Dorimanx, and without knowing too much on how to tweak it (more on that later), it is really smooth. I am keeping it!
vPro97 said:
I wouldn't mess with the ROM thermal protection found in hidden menu. The gain in speed is most likely negligible but you make your phone more prone to heat damage.
Click to expand...
Click to collapse
OK, great to know, it is so often repeated online that I used to have it. It is now off, absolutely no noticeable difference!
vPro97 said:
You can install a new kernel without any wipes. Kernel doesn't interfere with ROM as such and you don't have to disable anything. A Kernel is basically what makes software and hardware work together.
I hope this helps!
Click to expand...
Click to collapse
Thanks. Flashed perfectly, twice (I had trickster mod on and wasn't sure what it reset at boot, so uninstalled it and re-installed Dorimanx.)
Got 1040/2900 on geekbench even if that is not really what I care about. I had 950/2750 before, not that much noticeable difference in %.
vPro97 said:
Ondemand governor is great for smoothness, but you'll have a ton of options if you decide to use dorimanx. I use alucard because it's the sweet spot between amazing battery performance and smoothness.
Click to expand...
Click to collapse
OK, we're onto kernel tweaks , I have a few questions:
I discovered that I had STweaks installed, so let's use that.
1) Apart from governor alucard, what other settings should I apply? You mention thermal controls. I expect the defaults of STweaks are OK? If not, what should I do?
2) I found a GPU governor, should I do something there to have better performance?
3) my real goal is to achieve super smoothness when interacting with the phone, I don't play high CPU 3D games or anything like that. I want the phone to react instantly when I press somewhere or open something or press home or recent apps. Any advice? I modified touch boost frequency...
4) if I "reset settings to default" in STweaks, will it reset to Dorimanx' installed default as I just installed the kernel?
5) so that I don't bother anyone anymore, is there a manual about all these tweaks in Dorimanx/STweaks?
Thanks again so much!
Hey bud, I dont know if u found out the answers to these questions but I can share my information with u as I see nobody answered it
1)
2)
3) I'll tell u the best settings for smoothness but also with great battery life All questions ll be answered in one answer :
Make governers Alucard
Touchboost:1.9
Powesave Switch: Performance mode
Power Efficent Worqueues : Unticked
Cpu Tweaks:ticked
Max Cpu 0,1,2,3 freq:2572800
MAx screen off freq :Max Allowed
________________________-
Alucard Hotplug
Hotplug always active
2 cores boost
4 cores max online
2 cores min cpu online
___________________
gpu min 100
max 533
__________________
I/O read ahead 2048
row row
____________________
cron all on
___________________
Logcat Logger always disabled
_____________________
And from developer settings of ur ROM, make window animation, transition animation and animation duration scale 0.5x
If u re not dependant on xposed module, then use ARTruntime(faster)
4) Yes, all settings ll be restored to original Dorimanx settings.
5) I havent seen any yet
This is all I can say, let me know about results
Darius129 said:
Hey bud, I dont know if u found out the answers to these questions but I can share my information with u as I see nobody answered it
1)
2)
3) I'll tell u the best settings for smoothness but also with great battery life All questions ll be answered in one answer :
Make governers Alucard
Touchboost:1.9
Powesave Switch: Performance mode
Power Efficent Worqueues : Unticked
Cpu Tweaks:ticked
Max Cpu 0,1,2,3 freq:2572800
MAx screen off freq :Max Allowed
________________________-
Alucard Hotplug
Hotplug always active
2 cores boost
4 cores max online
2 cores min cpu online
___________________
gpu min 100
max 533
__________________
I/O read ahead 2048
row row
____________________
cron all on
___________________
Logcat Logger always disabled
_____________________
And from developer settings of ur ROM, make window animation, transition animation and animation duration scale 0.5x
If u re not dependant on xposed module, then use ARTruntime(faster)
4) Yes, all settings ll be restored to original Dorimanx settings.
5) I havent seen any yet
This is all I can say, let me know about results
Click to expand...
Click to collapse
Hey there. Thanks a lot for your answers, despite the thread being so old.
I actually learned a lot since i posted that
I use 2x intelliactive, 2x alucard, alicard HP, max freq 2.3, 2.3, 1.9, 1.9, gpu 100-533, i/0 read 1024, dirty tatios 5%/10%
Your settings look interesting, you sure you get great battery life? With 2 cores min? I am going to try
No mate, I said that's settings for u, u said u don't care about battery, so I tried to give u the best settings I can come up with for performance, I myself use 3 cores max, all 2,3 ghz 1 core boost, Alucard on-demand Alucard. 1024. 100 320 GPU. It's pretty smooth with art. But if I wouldn't care about battery, I would do the settings I told u. Hehe
Darius129 said:
No mate, I said that's settings for u, u said u don't care about battery, so I tried to give u the best settings I can come up with for performance, I myself use 3 cores max, all 2,3 ghz 1 core boost, Alucard on-demand Alucard. 1024. 100 320 GPU. It's pretty smooth with art. But if I wouldn't care about battery, I would do the settings I told u. Hehe
Click to expand...
Click to collapse
no worries!
I learned to care more about battery I realized that it is really smooth anyway. I have a lot of SOT daily (movies, etc) and realized that using performance settings just drains too quickly and is not needed.
I do put animations to x0.5 (transition animation to OFF).
What I am really struggling with is home redraws... A bit better now, but they used to be 1000x times a day.
I would run with ART but it takes a lot more memory, and with my 16 GB I don't have enough memory left when running ART.
Buddy, I am on 16 too. I had 8.5 hours sot with art and cloudy 2.1!! I use nova launcher and I am happier with it can give it a try
Darius129 said:
Buddy, I am on 16 too. I had 8.5 hours sot with art and cloudy 2.1!! I use nova launcher and I am happier with it can give it a try
Click to expand...
Click to collapse
I have a few very large apps (navigon, games,...) they take 2-3 GB.
I al so have movies, remaining is only 1.3 GB.
If i want to backup ROM i need to delete obb files, etc. With ART i will have nothing left!
Tried niva but didn't like it. Will try apex again maybe, but i really like the look of G3 home.
Hmm, I see. I didnt know that internal memory and has a thing to do ART, I just made it ART and everything was ok. Launcher is a matter of taste I guess. For lg launcher, I read that there are some hidden settings to lock it in RAM, so that it doesnt redraw that often, maybe u can take a look for that. Hope to share more information for better experience with our phones
@bloof I forgot to tell, I also like how g3 theme looks, and I use a g3 theme with my nova launcher. If pm me ur gmail, can send u my screenshots