I recently flashed the newest Trinity Kernel on my Nexus 7. I still have the stock ROM. I tried to tweak the CPU settings with ROM Toolbox and the most I can overclock is 1400mhz. Why can't I overclock to 1600? Is it because of the stock ROM? I'm looking into Glazed Jelly Bean as a custom ROM but I'm not sure I want or need to use a custom ROM at this point.
Any suggestions?
Because he dropped the Max. You probably flashed A111 correct? That's a TSVZ meaning it is slightly over clocked and undervolted kernel meant for battery not for performance.
Sent from my Nexus 7 using Xparent White Tapatalk 2
U2Bono269 said:
I recently flashed the newest Trinity Kernel on my Nexus 7. I still have the stock ROM. I tried to tweak the CPU settings with ROM Toolbox and the most I can overclock is 1400mhz. Why can't I overclock to 1600? Is it because of the stock ROM? I'm looking into Glazed Jelly Bean as a custom ROM but I'm not sure I want or need to use a custom ROM at this point.
Any suggestions?
Click to expand...
Click to collapse
try a96, its one of my faves. it has a max of 1700mhz http://goo.gl/mLUCZ
Mildly on topic question ... do you notice any imporvments with overclocking? My first experience with overclocking as on my Hero, and then Galaxy S1, but this N7 just feels so fast i cant see overclocking making it any smoother? lol
thanks
myke66 said:
Mildly on topic question ... do you notice any imporvments with overclocking? My first experience with overclocking as on my Hero, and then Galaxy S1, but this N7 just feels so fast i cant see overclocking making it any smoother? lol
thanks
Click to expand...
Click to collapse
yes. its noticeable, but not like on the older devices.
simms22 said:
yes. its noticeable, but not like on the older devices.
Click to expand...
Click to collapse
Nice, ill have to look into rooting sometime soon.
Ok, I got the a96 and I've flashed it...
Is there a detailed changelog for each version? The a111 said it was a 1600mhz kernel so I don't understand why it was dropped down to 1400. That's where my confusion was.
I did notice some increase in speed at 1400. I was having some stuttering issues with Dead Trigger and Minecraft PE, and they were less with the 1400. I've got it running at 1600 now but I don't know what it will do to the battery or how well it will perform. I'll find out later. I've run through the battery pretty quickly today, but I was tinkering with it A LOT so it's not accurate.
What kind of tweaks could I do using Rom Toolbox that would help me maximize my battery while overclocking to 1.6?
Dont over clock.. i dont even see a need to. I use the ondemand gov which stutters a little but using interactive clears that up. Also using the CFQ IO as it is the stock IO used. Its stock so its gotta be good . Also you should turn F-Sync off that helps quite a bit. Also you could toggle auto hotplug and make it only run two cores while gaming and then turn it back on when finished so that way it will hotplug cores as it sees necessary. You could also up the voltages a little bit, some CPU's dont like the lower voltage and that will cause stuttering and glitching just up them by 25mV and see if it clears if not try another 25mV.
I will try those things, but I really want to play with overclocking and learn what happens. This is my first Android device so I'm experimenting and playing around.
But I have one more question...I've overclocked to 1.5...I found 1.6 to be the same as 1.5. But it seems that after an hour or so, it resets to 1.3. in ROMToolbox. Why is this?
Don't use rom toolbox. Use the Trinity app. It sticks just fine for me. Besides you support the dev to make better kernels.
Sent From My Toro+ via White Tapatalk
simms22 said:
try a96, its one of my faves. it has a max of 1700mhz http://goo.gl/mLUCZ
Click to expand...
Click to collapse
i **** my pants a little when it says "system succesfully corrupted, please freak out now"
MRsf27 said:
i **** my pants a little when it says "system succesfully corrupted, please freak out now"
Click to expand...
Click to collapse
Lol its a joke... its the updater-script you can make it say anything... :laugh:
MRsf27 said:
i **** my pants a little when it says "system succesfully corrupted, please freak out now"
Click to expand...
Click to collapse
ha!
youre not the first
Overclocking past 1.4 Ghz doesn't result in any major usability improvements. I've gone up to 1.7 Ghz and the only thing it does is make my tablet really warm and unstable. All you really need for improving system performance is I/O tweaks to speed up app and page loading, and a little bit of GPU overclocking to help with the transitional effects.
and, to be honest, depending which trinity kernel im using, im using either 1100 or 1150mhz mostly. on a111 im using 1100mhz and on a96 i used 1150mhz. with those speeds everything is still fast but a bit better on battery
Overclocking
If you want a little more information about the the overclocking if you havent already you might want to check out http://forum.xda-developers.com/showthread.php?t=1788759 its the official thread of the trinity kernel for grouper.
Related
So, I can only run my phone at a MAX 1.3 GHZ without it crashing..
How can I run it at 1.26 without it crashing?
I am running Kings Kernel #11CFS
with Virus Sense Rom RC3
Is there some setting I need to chang? or use a different kernel..
why would you want too ? i would imagine that would kill the battery and make the phone very warm ?
Not all CPU's are created equal. If yours is crashing a lot at that frequency, chances are that yours will almost never run stable.
you could try using conservative scaling but it still probably wont be stable. most evo's cannot handle it.
Heat is your enemy. I suggest you try my hardware mod to really crank up the freq.
Overclocking
I just rooted my phone and I downloaded setcpu and I want to overclock it, but the max that i get is 998. And was wondering how can i get it at 1.267GHz. Im new to the android. Can someone please help.
The stock kernel does not allow over clocking, you'll have to try out a kernel from the development section, I recommend the newest Kingz.
Hey... I think this thing makes phone calls too!
1ktmeadows said:
I just rooted my phone and I downloaded setcpu and I want to overclock it, but the max that i get is 998. And was wondering how can i get it at 1.267GHz. Im new to the android. Can someone please help.
Click to expand...
Click to collapse
Download a kernel that supports OC.
I tinkered around with OC'ing a few months ago I could never get it over 10xx without crashing. I just learned to live without setcpu.
I agree with voodoo there's really no benefit, unless you like pulling the battery. I didn't notice any better performance or speed while overclocking.
nukedukem said:
Heat is your enemy. I suggest you try my hardware mod to really crank up the freq.
Click to expand...
Click to collapse
Lol... [op]is there a particular reason why you want it that high? In all honesty there is no benefit to this.
sent from my VooDoo phone...
VOODOOTRIP said:
Lol... [op]is there a particular reason why you want it that high? In all honesty there is no benefit to this.
sent from my VooDoo phone...
Click to expand...
Click to collapse
Indeedj this will cause ecen more battery drainage and additional heat that might damage the phone
Sent from the iPhone Assassin
Mine is running very stable at 1.26Ghz and great battery life. Running BakedSnack 1.8 along with kernel #6. I'm using Overclock Widget instead of SetCpu as SetCpu was causing lagging response on my EVO.
I dont need 1.26 GHZ
I just wanted to Know why my phone wasnt running stable at 1.26 even thoug it said it was capable of doing it..
Hey
nukedukem said:
Heat is your enemy. I suggest you try my hardware mod to really crank up the freq.
Click to expand...
Click to collapse
That looks pretty sweet.. is that real though?? if so what did you do?
ins0dus said:
That looks pretty sweet.. is that real though?? if so what did you do?
Click to expand...
Click to collapse
Love the cooler pic,lol. Might have to steal that one.
Sent from my PC36100 using XDA App
I always wondered when we'll start seeing little fans in our phones, or heat sinks on the back.
bender1077 said:
Click to expand...
Click to collapse
ahahahahaha
I agree with most ppl in that this phone is wicked fast as it is and its just not worth the risk/reward
HTC EVO4G A.K.A. Usain Bolt
Linpack: 34-35 MFLOPS Avg
Quadrant: 1500+
Kernel: King's #6 BFS
FPS2D: 54-55 FPS
ROM: Fresh 3.3
PRI: 1.77
I totally agree that heat is the undesired side effect of the overclocking of the Evo. I had been running mine at 1.152MHz and the noticed a couple of different colored spots on the screen especially during boot up with the bright white splash screen. This was caused by the excess heat from the CPU. I had my screen replaced due to dust under the glass and it is perfect, so no more overclocking for me.
Releasing my kernel ver10 which has NO OVERCLOCKING but has Undervolting. I'm pretty happy with the speed of Tegra 2 and I think there are a few advantages in keeping our speed in stock. Advantages IMO are as follows
1. Better Battery life
2. Less heat
3. Stability (unless it is too undervolted)
Update 4/25/11
Releasing PimpMyGtab and My latest kernel ver 11 with no Overclocking, just stock Speeds..Underclock using PimpMyGtab
Here is the link on how to use PimpMyGtab
http://forum.xda-developers.com/showthread.php?t=1018411
** If you get a scaling_governor error upon starting PimpmyGtab. It means you need to set your governor by going to Terminal and typing echo powersave > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor or by installing CPU Master and choosing powersave in governor.
BIG THANKS TO CPASJUSTE for the app and kernel codes.
BTW, If you like my work, don't hesitate to buy me a beer
If you ike PimpMyGtab, make sure you buy PimpMyCPU (Source) from the market by Cpasjuste
Thanks.
Nice. I'm not a fan of overclocking, however undervolting DOES interest me. As soon as I get an opportunity, I may try this out.
Curious, what's the stock voltage?
OK, LMK how it goes.
Phoenix84118 said:
Nice. I'm not a fan of overclocking, however undervolting DOES interest me. As soon as I get an opportunity, I may try this out.
Curious, what's the stock voltage?
Click to expand...
Click to collapse
stock - 750mv - 1000mv
Well I tried it out real quick, it works well (haven't verified battery life changes), but I had some questions:
Is there anyway to set the voltages explicitly? SetCPU didn't work with it (couldn't even change the freq or scaling governor).
I forgot your kernel doesn't support mounting the internal SD over USB. Is that something that will be fixed soon (assuming it's actually broken)?
I won't have my tab for a few weeks, sending it in for warranty replacement. So I won't be able to do further testing.
Thanks for the great work!
Hello clemsyn,
Try it out and battery life is soooooo gooood ... lot better than the OC 1.5GHZ one, of cause it run slower, but it's where i came to ask, if you could release one with the same voltage but for 1.2Ghz (which i guess it's stock speed)?
Many thanks for your hard work
y2k-inc said:
Hello clemsyn,
Try it out and battery life is soooooo gooood ... lot better than the OC 1.5GHZ one, of cause it run slower, but it's where i came to ask, if you could release one with the same voltage but for 1.2Ghz (which i guess it's stock speed)?
Many thanks for your hard work
Click to expand...
Click to collapse
Will do, just busy with life at the moment
y2k-inc said:
Hello clemsyn,
Try it out and battery life is soooooo gooood ... lot better than the OC 1.5GHZ one, of cause it run slower, but it's where i came to ask, if you could release one with the same voltage but for 1.2Ghz (which i guess it's stock speed)?
Many thanks for your hard work
Click to expand...
Click to collapse
OK here it is...this is basically stock voltage with OC to 1.2 ghz.
Thanks. Right now I'm tryingout the 700-900. Quadrant dropped from 2350 to 2150 going from ver9 to the UV.
I've been using the original kernel posted in this thread for a little while now. It has some strange slowdowns when the tablet first boots (from being powered off), but after that it runs great. Have not had any freezes, so it seems stable. Quadrant scores are ~ 2300.
clemsyn said:
OK here it is...this is basically stock voltage with OC to 1.2 ghz.
Click to expand...
Click to collapse
Thanks clemsys for this OC, but got FC every time i run Quadrant ... anyway back to version 10 uv for now
Hmmm, for some reason my pad won't run any of your Ginger undervolted offerings (can't get past my splash screen). But I'm very happy with Ginger9... Thanks!
dschach said:
Thanks. Right now I'm tryingout the 700-900. Quadrant dropped from 2350 to 2150 going from ver9 to the UV.
Click to expand...
Click to collapse
While the quadrant is down a little, I can't really tell any difference in performance when using the tablet. If the battery life improves then I will stick with this one.
sorry if this has been answered before, but the undervolted
kernel still has cifs support?
(just to check, you need clockworkmod to install this, right?)
albright said:
sorry if this has been answered before, but the undervolted
kernel still has cifs support?
(just to check, you need clockworkmod to install this, right?)
Click to expand...
Click to collapse
Yes it does and cwm is required to install
thanks soo much for this. I've been wanting to undervolt but the overclocking for me was a deal breaker. 1ghz is fast enough for any android app imo. Gonna try this soon!!!!!
clemsyn said:
OK here it is...this is basically stock voltage with OC to 1.2 ghz.
Click to expand...
Click to collapse
This one is perfect for me, and for some reason I am able to use quadrant for once... beer is on it's way...
Wont go past splash vegan 5.11. Installed it via cwm then whiped Calvin and cache partition. Any ideas?
extensive said:
Wont go past splash vegan 5.11. Installed it via cwm then whiped Calvin and cache partition. Any ideas?
Click to expand...
Click to collapse
Seems like your tegra can't take the underclocked settings.
Well that sucks
just curious really as my phone never gets warm or anything running at 768mhz the battery life is also pretty good.
hey,
i don´t think so, because in the worst case your phone will take damage. But this ~770 mhz are about 250 more then before. Im happy with this xDDD
that is true haha, i just dont see it doing much harm if the phone will run stable higher at the same voltage or the tiniest bit higher
No, that's the limit of the MSM7225. (Achieved by adjusting the PLL to its max, any higher will overrun the limits of the chip, and cause it to most likely fail)
i would like to know, if its very bad for the phone, if you let it permanently run with full speed. Ok, if it will get very hot.. thats clear, but is it bad if you have the 77mhz and it is for example in silent mode, or when you listen to some music. Should you ever take some possible speed away, if its not need? (thx)
The hardware life will probably be reduced. By how much, it cannot be said definitively, but, I am pretty sure that by the time the hardware fails because of overclocking, the phone will have been retired long back.
What you are requesting (Dynamically changing speed) is exactly what Speed Governors (Performance, Internative, OnDemand etc) do. If you are on CM7, use Smartass Governor, because it's the "smartest". If not, then use Interactive governor.
i use ginger yoshi... and sometimes it sais that the sd was removed. Could overclock be a reason for this?
I dont think so. I got the same issue once, and formatting the SDCard fixed it.
ok i will try it thanks
3xeno said:
The hardware life will probably be reduced. By how much, it cannot be said definitively, but, I am pretty sure that by the time the hardware fails because of overclocking, the phone will have been retired long back.
What you are requesting (Dynamically changing speed) is exactly what Speed Governors (Performance, Internative, OnDemand etc) do. If you are on CM7, use Smartass Governor, because it's the "smartest". If not, then use Interactive governor.
Click to expand...
Click to collapse
I have a sense rom on the wildfire, so I will try Interactive Governor. Do I still need SetCPU in order to use it?
KhurramF said:
I have a sense rom on the wildfire, so I will try Interactive Governor. Do I still need SetCPU in order to use it?
Click to expand...
Click to collapse
To use overclocking and governers on sense roms, oc kernel and application like setcpu are must. Setcpu has governers too.
Sent from my HTC Wildfire using XDA App
bharatgaddameedi said:
To use overclocking and governers on sense roms, oc kernel and application like setcpu are must. Setcpu has governers too.
Click to expand...
Click to collapse
Even if it a custom rom? I am using JokerDroid 4.2.
KhurramF said:
Even if it a custom rom? I am using JokerDroid 4.2.
Click to expand...
Click to collapse
Depends whether the rom has inbuilt oc kernel or not.
Haven't used the jokerdroid. But I think it has...
Sent from my HTC Wildfire using XDA App
bharatgaddameedi said:
Depends whether the rom has inbuilt oc kernel or not.
Haven't used the jokerdroid. But I think it has...
Click to expand...
Click to collapse
Looked at JokerDroid's thread and it says about version 4.2
■ Kernel : nFinity Kernel
■ Build Number : 2.37.415.1
■ CPU Overclock : 710 Mhz
Click to expand...
Click to collapse
So this means it has an oc kernel?
KhurramF said:
Looked at JokerDroid's thread and it says about version 4.2
So this means it has an oc kernel?
Click to expand...
Click to collapse
Yes, it does, and it is overclocked to 710 MHz, by default.
I have moved from CM7 to Hombase 5.4, and found that setcpu no longer seems to do anything. on CM7 it worked as i had hoped, underclocking the phone when i was doing low intensity stuff like texting, and pushing it up to full power for videos etc. now it does nothing but tell me core temps, which are always high as its always running at 1Ghz.
Can anyone explain how to get it back to underclocking?
Many Thanks
Try a different kernel.
Sent from my CM860
ishamm said:
I have moved from CM7 to Hombase 5.4, and found that setcpu no longer seems to do anything. on CM7 it worked as i had hoped, underclocking the phone when i was doing low intensity stuff like texting, and pushing it up to full power for videos etc. now it does nothing but tell me core temps, which are always high as its always running at 1Ghz.
Can anyone explain how to get it back to underclocking?
Many Thanks
Click to expand...
Click to collapse
This is a known issue with the OC faux kernel. I was running into the same problem with his enhanced stock kernel after using webtop. After reflashing the enhanced stock 0.2.0 it would still get stuck at max 1Ghz after using webtop, but a reboot would get the underclocking working again.
I only tried the webtop hack to see if I could get it working. I haven't gone back into it at all so I don't know if this is something that will reoccur. Although I will say that with my day to day use I have not run into any clocking issues since.
Thanks, is there a page somewhere which details which kernels do what and which would work with my rom?
Sent from my MB860 using xda premium
ishamm said:
Thanks, is there a page somewhere which details which kernels do what and which would work with my rom?
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
This is the page for faux's kernels. As far as details, start reading and searching through that thread as well as the threads for any ROMS you are using. 99% of the time people will either have the same problem (and possible fix), the other 1% of the time they will identify a bug (i.e. maxed out CPU).
Keep in mind faux does have different kernels for Froyo, GB, and CM7.
For some reason even if I move the slider from 1300my to 1000, when I touch the screen with at least 3 fingers for a few seconds it pegs out at 1300. I read our cpu's are daisy chained so to speak
so the 2nd core kicks in when needed. I tried cpu tuner and it gives the option to powersave and only use one core or if you choose performance it will allow Both cores. Just might be setcpu isn't designed fully for our dual core setup.
thanks for the link to kernels, but i cant find one for HomBase, or a Kernel only download on the homebase thread. i have the Version2, which has some blur, but only the 1.0Ghz clock kernel. where could i get the 1.3GHz download by itself, to see if that might help, as its the one CM7 had iirc
Thanks
ishamm said:
thanks for the link to kernels, but i cant find one for HomBase, or a Kernel only download on the homebase thread. i have the Version2, which has some blur, but only the 1.0Ghz clock kernel. where could i get the 1.3GHz download by itself, to see if that might help, as its the one CM7 had iirc
Thanks
Click to expand...
Click to collapse
Get the 1.3 from the faux thread that I linked to. They're in the very first post...
CM7 is the only ROM that has its own custom faux kernel. For all other ROMS just match the kernel to the build the ROM is based off of (Froyo or GB). If you're using V.2 of Homebase then use the GB one.
Update: Also, there are other kernels out there. I was only using faux's as an example since you were using CM7 and Homebase.
thanks, ive now got the 1.3Ghz kernel installed successfuly, but it still seems like setcpu will not underclock. i dont know if its normal, but the "Scaling" option is greyed out, and i cant get access to the Advanced tab. is there something im doing wrong in setcpu itself?
thanks again
ishamm said:
thanks, ive now got the 1.3Ghz kernel installed successfuly, but it still seems like setcpu will not underclock. i dont know if its normal, but the "Scaling" option is greyed out, and i cant get access to the Advanced tab. is there something im doing wrong in setcpu itself?
thanks again
Click to expand...
Click to collapse
Lack of underclocking is a known issue with the latest OC kernel. I'm unclear whether it's actually a bug with the kernel or with setCPU not supporting dual core devices. But yeah, there's a problem with it right now. I'm on the stock enhanced, and other than the webtop issue I mentioned above, it works fine.
Scaling/advanced are not available, this is something that is determined by the kernel you are using not the app.
ok so if i understand you right i would be best off using the stock enhanced kernel (for now), as it will underclock fine?
ishamm said:
ok so if i understand you right i would be best off using the stock enhanced kernel (for now), as it will underclock fine?
Click to expand...
Click to collapse
It's working perfectly for me, except after webtop use (which I don't normally use).
I'm still having the same issues regardless of weather I choose power save or performance it will not underclock, and those are the only governors I get the option of :s
Sent from my MB860 using xda premium
So I was wondering about the truth behind the risks of frying your cpu through overclocking or the chip itself degrading faster over time, and if there are such risks do they apply to a simple 2.5 ghz overclocking ?
There isn't any risk like that, unless you are using extremely high voltage, or are at terribly hot place.
I have tested all the overclockable kernels, and haven't found a single one which is steady at 2.6 or 2.8 GHz. Only Faux's kernel at 2490 MHz is stable.
Don't be scared, there's no risk.
PS: I personally use Performance governor by the way, so the CPU is always at max frequency, against all advice I keep using that for past three years, never had a problem, and you can understand where I live the temperature reaches extremely high in summer, so...
devilsdouble said:
There isn't any risk like that, unless you are using extremely high voltage, or are at terribly hot place.
I have tested all the overclockable kernels, and haven't found a single one which is steady at 2.6 or 2.8 GHz. Only Faux's kernel at 2490 MHz is stable.
Don't be scared, there's no risk.
PS: I personally use Performance governor by the way, so the CPU is always at max frequency, against all advice I keep using that for past three years, never had a problem, and you can understand where I live the temperature reaches extremely high in summer, so...
Click to expand...
Click to collapse
That's actually comforting I too am using fauxclock and I live in Egypt so the temperature gets pretty high here, but I'm constantly monitoring the cpu's temperature so I will give the 2.5 ghz overclock a try for a while and see how it goes.
MohamedOMostafa said:
That's actually comforting I too am using fauxclock and I live in Egypt so the temperature gets pretty high here, but I'm constantly monitoring the cpu's temperature so I will give the 2.5 ghz overclock a try for a while and see how it goes.
Click to expand...
Click to collapse
Yeah do that. Just to see if the OC is stable run that damn Antutu benchmark. If the device doesn't reboot/stuck then OC is stable
Best of luck.
devilsdouble said:
Yeah do that. Just to see if the OC is stable run that damn Antutu benchmark. If the device doesn't reboot/stuck then OC is stable
Best of luck.
Click to expand...
Click to collapse
That's the first thing I did actually
MohamedOMostafa said:
That's the first thing I did actually
Click to expand...
Click to collapse
Ha ha. Good. That's on Faux right? I got almost same score (44.7k) when I was checking.
Now if you want more then flash one of those 2.6 or 2.8 GHz kernels, and do the test, and message me if Antutu finishes the benchmark even once
devilsdouble said:
Ha ha. Good. That's on Faux right? I got almost same score (44.7k) when I was checking.
Now if you want more then flash one of those 2.6 or 2.8 GHz kernels, and do the test, and message me if Antutu finishes the benchmark even once
Click to expand...
Click to collapse
will do.
If you want higher you should try out Ultimate Kernel. Although it is removed from XDA, you can still find it on some foreign language site. It's the highest and most stable OC kernel I have used (3.0GHz).
Graffiti Exploit said:
If you want higher you should try out Ultimate Kernel. Although it is removed from XDA, you can still find it on some foreign language site. It's the highest and most stable OC kernel I have used (3.0GHz).
Click to expand...
Click to collapse
3.0 GHz
any benchmark screenshots ??
Graffiti Exploit said:
If you want higher you should try out Ultimate Kernel. Although it is removed from XDA, you can still find it on some foreign language site. It's the highest and most stable OC kernel I have used (3.0GHz).
Click to expand...
Click to collapse
Hmm, just found the topic, and it's mentioned that the topic was close due to non-compliance with the GNU GPLv2 and XDA forum rules, now what's the former thing?
Anyone has the latest version, if it's still updated outside XDA? Want to try it.
djak272 said:
3.0 GHz
any benchmark screenshots ??
Click to expand...
Click to collapse
Sorry cleaned up my screenshots folder as it was taking up a lot of space. Besides Antutu has been constantly getting updates so it may not be accurate.
devilsdouble said:
Hmm, just found the topic, and it's mentioned that the topic was close due to non-compliance with the GNU GPLv2 and XDA forum rules, now what's the former thing?
Anyone has the latest version, if it's still updated outside XDA? Want to try it.
Click to expand...
Click to collapse
I don't know if this is allowed but here it is.
v72
http://www.android-hilfe.de/custom-...ernel-kitkat-tw-only-ultimate-kernel-v72.html
v73
https://www.androidsource.club/foru...kernel-ultimate-kernel-v73-galaxy-note-3.html
Last one I used was v63. So do test it out more because I cannot vouch for the updates. But based from experience, I have never gotten an unstable update from that kernel.
Graffiti Exploit said:
Sorry cleaned up my screenshots folder as it was taking up a lot of space. Besides Antutu has been constantly getting updates so it may not be accurate.
I don't know if this is allowed but here it is.
v72
http://www.android-hilfe.de/custom-...ernel-kitkat-tw-only-ultimate-kernel-v72.html
v73
https://www.androidsource.club/foru...kernel-ultimate-kernel-v73-galaxy-note-3.html
Last one I used was v63. So do test it out more because I cannot vouch for the updates. But based from experience, I have never gotten an unstable update from that kernel.
Click to expand...
Click to collapse
Thanks a lot for the link mate. Downloaded and flashed v73, but I can't get it past the stock clock rate of 2265 MHz! I mean I have tried to set higher frequency than that in S Tweaks, even downloaded Trickstar, SetCPU, but the it'd just stuck at 2265 MHz! I can go lower than 2265 but not higher! Weird!
devilsdouble said:
Thanks a lot for the link mate. Downloaded and flashed v73, but I can't get it past the stock clock rate of 2265 MHz! I mean I have tried to set higher frequency than that in S Tweaks, even downloaded Trickstar, SetCPU, but the it'd just stuck at 2265 MHz! I can go lower than 2265 but not higher! Weird!
Click to expand...
Click to collapse
I think it comes with 2 apps for customization. You apply frequency on the first one and open the other and select apply changes. I'm not sure if it was this kernel or was it AEL. Lol. Anyways good luck. Maybe your ROM doesn't support a certain "stuff". I'm sorry but I really forgot about those terminologies. You can read up on the closed thread if you want. I'm sure you'll have a clue or on that link I gave you. *Google Translate ftw*