Releasing my kernel ver10 which has NO OVERCLOCKING but has Undervolting. I'm pretty happy with the speed of Tegra 2 and I think there are a few advantages in keeping our speed in stock. Advantages IMO are as follows
1. Better Battery life
2. Less heat
3. Stability (unless it is too undervolted)
Update 4/25/11
Releasing PimpMyGtab and My latest kernel ver 11 with no Overclocking, just stock Speeds..Underclock using PimpMyGtab
Here is the link on how to use PimpMyGtab
http://forum.xda-developers.com/showthread.php?t=1018411
** If you get a scaling_governor error upon starting PimpmyGtab. It means you need to set your governor by going to Terminal and typing echo powersave > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor or by installing CPU Master and choosing powersave in governor.
BIG THANKS TO CPASJUSTE for the app and kernel codes.
BTW, If you like my work, don't hesitate to buy me a beer
If you ike PimpMyGtab, make sure you buy PimpMyCPU (Source) from the market by Cpasjuste
Thanks.
Nice. I'm not a fan of overclocking, however undervolting DOES interest me. As soon as I get an opportunity, I may try this out.
Curious, what's the stock voltage?
OK, LMK how it goes.
Phoenix84118 said:
Nice. I'm not a fan of overclocking, however undervolting DOES interest me. As soon as I get an opportunity, I may try this out.
Curious, what's the stock voltage?
Click to expand...
Click to collapse
stock - 750mv - 1000mv
Well I tried it out real quick, it works well (haven't verified battery life changes), but I had some questions:
Is there anyway to set the voltages explicitly? SetCPU didn't work with it (couldn't even change the freq or scaling governor).
I forgot your kernel doesn't support mounting the internal SD over USB. Is that something that will be fixed soon (assuming it's actually broken)?
I won't have my tab for a few weeks, sending it in for warranty replacement. So I won't be able to do further testing.
Thanks for the great work!
Hello clemsyn,
Try it out and battery life is soooooo gooood ... lot better than the OC 1.5GHZ one, of cause it run slower, but it's where i came to ask, if you could release one with the same voltage but for 1.2Ghz (which i guess it's stock speed)?
Many thanks for your hard work
y2k-inc said:
Hello clemsyn,
Try it out and battery life is soooooo gooood ... lot better than the OC 1.5GHZ one, of cause it run slower, but it's where i came to ask, if you could release one with the same voltage but for 1.2Ghz (which i guess it's stock speed)?
Many thanks for your hard work
Click to expand...
Click to collapse
Will do, just busy with life at the moment
y2k-inc said:
Hello clemsyn,
Try it out and battery life is soooooo gooood ... lot better than the OC 1.5GHZ one, of cause it run slower, but it's where i came to ask, if you could release one with the same voltage but for 1.2Ghz (which i guess it's stock speed)?
Many thanks for your hard work
Click to expand...
Click to collapse
OK here it is...this is basically stock voltage with OC to 1.2 ghz.
Thanks. Right now I'm tryingout the 700-900. Quadrant dropped from 2350 to 2150 going from ver9 to the UV.
I've been using the original kernel posted in this thread for a little while now. It has some strange slowdowns when the tablet first boots (from being powered off), but after that it runs great. Have not had any freezes, so it seems stable. Quadrant scores are ~ 2300.
clemsyn said:
OK here it is...this is basically stock voltage with OC to 1.2 ghz.
Click to expand...
Click to collapse
Thanks clemsys for this OC, but got FC every time i run Quadrant ... anyway back to version 10 uv for now
Hmmm, for some reason my pad won't run any of your Ginger undervolted offerings (can't get past my splash screen). But I'm very happy with Ginger9... Thanks!
dschach said:
Thanks. Right now I'm tryingout the 700-900. Quadrant dropped from 2350 to 2150 going from ver9 to the UV.
Click to expand...
Click to collapse
While the quadrant is down a little, I can't really tell any difference in performance when using the tablet. If the battery life improves then I will stick with this one.
sorry if this has been answered before, but the undervolted
kernel still has cifs support?
(just to check, you need clockworkmod to install this, right?)
albright said:
sorry if this has been answered before, but the undervolted
kernel still has cifs support?
(just to check, you need clockworkmod to install this, right?)
Click to expand...
Click to collapse
Yes it does and cwm is required to install
thanks soo much for this. I've been wanting to undervolt but the overclocking for me was a deal breaker. 1ghz is fast enough for any android app imo. Gonna try this soon!!!!!
clemsyn said:
OK here it is...this is basically stock voltage with OC to 1.2 ghz.
Click to expand...
Click to collapse
This one is perfect for me, and for some reason I am able to use quadrant for once... beer is on it's way...
Wont go past splash vegan 5.11. Installed it via cwm then whiped Calvin and cache partition. Any ideas?
extensive said:
Wont go past splash vegan 5.11. Installed it via cwm then whiped Calvin and cache partition. Any ideas?
Click to expand...
Click to collapse
Seems like your tegra can't take the underclocked settings.
Well that sucks
Related
just curious really as my phone never gets warm or anything running at 768mhz the battery life is also pretty good.
hey,
i don´t think so, because in the worst case your phone will take damage. But this ~770 mhz are about 250 more then before. Im happy with this xDDD
that is true haha, i just dont see it doing much harm if the phone will run stable higher at the same voltage or the tiniest bit higher
No, that's the limit of the MSM7225. (Achieved by adjusting the PLL to its max, any higher will overrun the limits of the chip, and cause it to most likely fail)
i would like to know, if its very bad for the phone, if you let it permanently run with full speed. Ok, if it will get very hot.. thats clear, but is it bad if you have the 77mhz and it is for example in silent mode, or when you listen to some music. Should you ever take some possible speed away, if its not need? (thx)
The hardware life will probably be reduced. By how much, it cannot be said definitively, but, I am pretty sure that by the time the hardware fails because of overclocking, the phone will have been retired long back.
What you are requesting (Dynamically changing speed) is exactly what Speed Governors (Performance, Internative, OnDemand etc) do. If you are on CM7, use Smartass Governor, because it's the "smartest". If not, then use Interactive governor.
i use ginger yoshi... and sometimes it sais that the sd was removed. Could overclock be a reason for this?
I dont think so. I got the same issue once, and formatting the SDCard fixed it.
ok i will try it thanks
3xeno said:
The hardware life will probably be reduced. By how much, it cannot be said definitively, but, I am pretty sure that by the time the hardware fails because of overclocking, the phone will have been retired long back.
What you are requesting (Dynamically changing speed) is exactly what Speed Governors (Performance, Internative, OnDemand etc) do. If you are on CM7, use Smartass Governor, because it's the "smartest". If not, then use Interactive governor.
Click to expand...
Click to collapse
I have a sense rom on the wildfire, so I will try Interactive Governor. Do I still need SetCPU in order to use it?
KhurramF said:
I have a sense rom on the wildfire, so I will try Interactive Governor. Do I still need SetCPU in order to use it?
Click to expand...
Click to collapse
To use overclocking and governers on sense roms, oc kernel and application like setcpu are must. Setcpu has governers too.
Sent from my HTC Wildfire using XDA App
bharatgaddameedi said:
To use overclocking and governers on sense roms, oc kernel and application like setcpu are must. Setcpu has governers too.
Click to expand...
Click to collapse
Even if it a custom rom? I am using JokerDroid 4.2.
KhurramF said:
Even if it a custom rom? I am using JokerDroid 4.2.
Click to expand...
Click to collapse
Depends whether the rom has inbuilt oc kernel or not.
Haven't used the jokerdroid. But I think it has...
Sent from my HTC Wildfire using XDA App
bharatgaddameedi said:
Depends whether the rom has inbuilt oc kernel or not.
Haven't used the jokerdroid. But I think it has...
Click to expand...
Click to collapse
Looked at JokerDroid's thread and it says about version 4.2
■ Kernel : nFinity Kernel
■ Build Number : 2.37.415.1
■ CPU Overclock : 710 Mhz
Click to expand...
Click to collapse
So this means it has an oc kernel?
KhurramF said:
Looked at JokerDroid's thread and it says about version 4.2
So this means it has an oc kernel?
Click to expand...
Click to collapse
Yes, it does, and it is overclocked to 710 MHz, by default.
Hey everyone...I tell ya, I sure am enjoying all these awesome custom roms and kernels. Great job to all the developers here, putting in the blood, sweat, and tears for the advancement of the community, thank you so much. One feature that I saw in a Xoom build was the GPU overclocked, and while I'm sure it won't interest everyone, and there is probably only little gain to be had from it, I would love to have the option to oc the CPU and the GPU for the highest performance possible...please. Well I think that covers it unless someone else shares my desire to see this feature. Thanks for all your work and consideration XDA and have a great day.
if ur CPU OC than GPU too
Apparently not so on the Motorola Xoom as there are two versions of Tiamat 1.4.4... with and without GPU OC. Tiamat 1.4.4 Full Throttle
cq842000 said:
Apparently not so on the Motorola Xoom as there are two versions of Tiamat 1.4.4... with and without GPU OC. Tiamat 1.4.4 Full Throttle
Click to expand...
Click to collapse
oc-ing the gpu doesnt get you anything... gpu is default 200mhz 2d with 300mhz in 3d and it can be uped to 250mhz 2d and 400mhz 3d but it cant be software controlled and it will eat more power...
and no oc-ing the cpu doesn't oc the gpu, its a separate part of the tegra2 processor
Hey Thor, thanks for joining the conversation. Based on what youve seen so far, how well are the tegra GPU cores being utilized? Suffice to say I've pulled off insane desktop GPU overclocks that showed almost nill gain with drivers that werent mature in which the GPU cores werent being loaded past 50% . I realize that the tegra is a horse of a different color, but isnt it still affected by the specific driver optimizations, hence the THD enhancements? Just out of curiosity as I very much trust your experience. I am still interested in trying it with definitive comparisons to follow...well about as definitive as synthetic benchmarks can be anyway.
I just saw that you have a new beta... Yay. I cant wait to give it a whirl.
I have been over locked for a little while. Max I have done is 1506 but it tends to be slightly unstable. I run 1400 now and haven't had any issues. biggest difference I notice is home screen transitions load fast and don't lag and programs load much quicker. there doesnt seem to be any games that will push the CPU hard so I don't notice much of a difference there.
.
specd_out said:
I have been over locked for a little while. Max I have done is 1506 but it tends to be slightly unstable. I run 1400 now and haven't had any issues. biggest difference I notice is home screen transitions load fast and don't lag and programs load much quicker. there doesnt seem to be any games that will push the CPU hard so I don't notice much of a difference there.
.
Click to expand...
Click to collapse
I've had 1600mhz going strong with no instability, benchmark after benchmark, the only issue I've had is the device shutting down when left alone for too long, but I consider that a useful standard function. Otherwise 1600 performance has been rock solid. I decided to take it upon myself to take this girl apart' clean the CPU off, remove the thermal pad, and apply some as5....though the chip didnt really run very hot to begin with. Now until I have the option to go for 1800mhz, I'd like to see where the max threshold is for cpu/gpu oc.
I have mine overclocked also at 1600.. Runs very stable at this speed and benchmarks not too bad:
http://imageshack.us/photo/my-images/20/device20110712225412.png/
I have had higher speeds, but very unstable...
thor2002ro said:
oc-ing the gpu doesnt get you anything... gpu is default 200mhz 2d with 300mhz in 3d and it can be uped to 250mhz 2d and 400mhz 3d but it cant be software controlled and it will eat more power...
and no oc-ing the cpu doesn't oc the gpu, its a separate part of the tegra2 processor
Click to expand...
Click to collapse
Can only the 3D Clocks be altered without touching 2D? If yes can you make such a version of the ........... that "nobody" knows anything about?
Trinnity66 said:
I have mine overclocked also at 1600.. Runs very stable at this speed and benchmarks not too bad:
http://imageshack.us/photo/my-images/20/device20110712225412.png/
I have had higher speeds, but very unstable...
Click to expand...
Click to collapse
Very nice quadrant score man, I used to score alot higher until I updated to stock 3.1+ updates. It seems like the higher my OS version number gets, the lower my synthetic performance gets overall.
cq842000 said:
I've had 1600mhz going strong with no instability, benchmark after benchmark, the only issue I've had is the device shutting down when left alone for too long, but I consider that a useful standard function. Otherwise 1600 performance has been rock solid. I decided to take it upon myself to take this girl apart' clean the CPU off, remove the thermal pad, and apply some as5....though the chip didnt really run very hot to begin with. Now until I have the option to go for 1800mhz, I'd like to see where the max threshold is for cpu/gpu oc.
Click to expand...
Click to collapse
that's what mine did. it would reboot while sleeping. sometimes it would be 3 or 4 times in an hour.
Trinnity66 said:
I have mine overclocked also at 1600.. Runs very stable at this speed and benchmarks not too bad:
I have had higher speeds, but very unstable...
Click to expand...
Click to collapse
Wow!
Umm, what rom do you guys run for this? I'm on rooted and CWMd stock 3.1 rom. Can't find a OC kernel for it. Only one I can find is for ASUS based roms. I prefer to keep stock rom if it's possible.
ME: Asus A500 Iconia USA wifi only. HC 3.1
nexgenasian said:
Wow!
Umm, what rom do you guys run for this? I'm on rooted and CWMd stock 3.1 rom. Can't find a OC kernel for it. Only one I can find is for ASUS based roms. I prefer to keep stock rom if it's possible.
ME: Asus A500 Iconia USA wifi only. HC 3.1
Click to expand...
Click to collapse
You should try richardtrip's kernel. His kernel is keep updating Very good performance and stability.
thats the kernel i am using o/c 1400 works very well. you can find it in the development thread.
ardatdat said:
You should try richardtrip's kernel. His kernel is keep updating Very good performance and stability.
Click to expand...
Click to collapse
Thanks! Works great. Do you feel the HoneyVillian rom runs faster with the v2.4 Kernel or about the same as stock Acer 3.1 HC rom with v2.4 Kernel?
So far I can keep stable at 1.5 after 2 hours of use. It's also slept for 30 mins and seems ok at that too.
Also what kind of Scaling do you guys use? Ondeman, Interactive? On my phone I use ondemand.
I recently flashed the newest Trinity Kernel on my Nexus 7. I still have the stock ROM. I tried to tweak the CPU settings with ROM Toolbox and the most I can overclock is 1400mhz. Why can't I overclock to 1600? Is it because of the stock ROM? I'm looking into Glazed Jelly Bean as a custom ROM but I'm not sure I want or need to use a custom ROM at this point.
Any suggestions?
Because he dropped the Max. You probably flashed A111 correct? That's a TSVZ meaning it is slightly over clocked and undervolted kernel meant for battery not for performance.
Sent from my Nexus 7 using Xparent White Tapatalk 2
U2Bono269 said:
I recently flashed the newest Trinity Kernel on my Nexus 7. I still have the stock ROM. I tried to tweak the CPU settings with ROM Toolbox and the most I can overclock is 1400mhz. Why can't I overclock to 1600? Is it because of the stock ROM? I'm looking into Glazed Jelly Bean as a custom ROM but I'm not sure I want or need to use a custom ROM at this point.
Any suggestions?
Click to expand...
Click to collapse
try a96, its one of my faves. it has a max of 1700mhz http://goo.gl/mLUCZ
Mildly on topic question ... do you notice any imporvments with overclocking? My first experience with overclocking as on my Hero, and then Galaxy S1, but this N7 just feels so fast i cant see overclocking making it any smoother? lol
thanks
myke66 said:
Mildly on topic question ... do you notice any imporvments with overclocking? My first experience with overclocking as on my Hero, and then Galaxy S1, but this N7 just feels so fast i cant see overclocking making it any smoother? lol
thanks
Click to expand...
Click to collapse
yes. its noticeable, but not like on the older devices.
simms22 said:
yes. its noticeable, but not like on the older devices.
Click to expand...
Click to collapse
Nice, ill have to look into rooting sometime soon.
Ok, I got the a96 and I've flashed it...
Is there a detailed changelog for each version? The a111 said it was a 1600mhz kernel so I don't understand why it was dropped down to 1400. That's where my confusion was.
I did notice some increase in speed at 1400. I was having some stuttering issues with Dead Trigger and Minecraft PE, and they were less with the 1400. I've got it running at 1600 now but I don't know what it will do to the battery or how well it will perform. I'll find out later. I've run through the battery pretty quickly today, but I was tinkering with it A LOT so it's not accurate.
What kind of tweaks could I do using Rom Toolbox that would help me maximize my battery while overclocking to 1.6?
Dont over clock.. i dont even see a need to. I use the ondemand gov which stutters a little but using interactive clears that up. Also using the CFQ IO as it is the stock IO used. Its stock so its gotta be good . Also you should turn F-Sync off that helps quite a bit. Also you could toggle auto hotplug and make it only run two cores while gaming and then turn it back on when finished so that way it will hotplug cores as it sees necessary. You could also up the voltages a little bit, some CPU's dont like the lower voltage and that will cause stuttering and glitching just up them by 25mV and see if it clears if not try another 25mV.
I will try those things, but I really want to play with overclocking and learn what happens. This is my first Android device so I'm experimenting and playing around.
But I have one more question...I've overclocked to 1.5...I found 1.6 to be the same as 1.5. But it seems that after an hour or so, it resets to 1.3. in ROMToolbox. Why is this?
Don't use rom toolbox. Use the Trinity app. It sticks just fine for me. Besides you support the dev to make better kernels.
Sent From My Toro+ via White Tapatalk
simms22 said:
try a96, its one of my faves. it has a max of 1700mhz http://goo.gl/mLUCZ
Click to expand...
Click to collapse
i **** my pants a little when it says "system succesfully corrupted, please freak out now"
MRsf27 said:
i **** my pants a little when it says "system succesfully corrupted, please freak out now"
Click to expand...
Click to collapse
Lol its a joke... its the updater-script you can make it say anything... :laugh:
MRsf27 said:
i **** my pants a little when it says "system succesfully corrupted, please freak out now"
Click to expand...
Click to collapse
ha!
youre not the first
Overclocking past 1.4 Ghz doesn't result in any major usability improvements. I've gone up to 1.7 Ghz and the only thing it does is make my tablet really warm and unstable. All you really need for improving system performance is I/O tweaks to speed up app and page loading, and a little bit of GPU overclocking to help with the transitional effects.
and, to be honest, depending which trinity kernel im using, im using either 1100 or 1150mhz mostly. on a111 im using 1100mhz and on a96 i used 1150mhz. with those speeds everything is still fast but a bit better on battery
Overclocking
If you want a little more information about the the overclocking if you havent already you might want to check out http://forum.xda-developers.com/showthread.php?t=1788759 its the official thread of the trinity kernel for grouper.
Hi, how can i overclock my tf300t (Clean rom 2.5 oveclock 1.6ghz) to 2.0 Ghz? i read something in the forum but there isn't any kind of guide, i want know if the tablet is stable with this frequency, and if i risk something.
thanks
anthraxx90 said:
Hi, how can i overclock my tf300t (Clean rom 2.5 oveclock 1.6ghz) to 2.0 Ghz? i read something in the forum but there isn't any kind of guide, i want know if the tablet is stable with this frequency, and if i risk something.
thanks
Click to expand...
Click to collapse
Why would you need to overclock so high? Do you want it to explode! xD
Seriously though, would probably advise against it. It's like a whole 700/800 MHz higher than it's meant to run at stock. I'd say it would be very unstable, and probably wouldn't get very far battery-life-wise. 1.6GHz really not enough :/
mozyman said:
Why would you need to overclock so high? Do you want it to explode! xD
Seriously though, would probably advise against it. It's like a whole 700/800 MHz higher than it's meant to run at stock. I'd say it would be very unstable, and probably wouldn't get very far battery-life-wise. 1.6GHz really not enough :/
Click to expand...
Click to collapse
1.6ghz is ok? or i'll risk something?
I did that speed already. But it is very very unstable. random reboots within 10 minutes of use. also the battery life is very low. and the whole tablet is to hot.
i only was using it to see how fast it could go. that was the max. i am at Cutom Rom - 07/10/2012 - [email protected] Edition V02 - The Ultra Fast Rom - based on last Asus Firmware 10.4.2.13 at this moment.
this is very stable. balanced speed is 1.3 and thats oke. Normal performance speed is 1.6 but i only use that when playing games. You dont need those high speeds for daily use.
If you have the financial means to buy a new tablet - you can try all the time to work on this frequency.
With 1,6ghz i'll risk to break the tablet?
i used 2.0ghz about a week daily use. But now im lowered it to 1.8ghz and it is stable my everyday use. and battery lenght is very good maybe better than stock (i made undervoltage, so cpu uses -50mv less power in any speed than normaly/stock )1.8ghz use 1150mv and lowest speed use 775 mv)
Niksunen said:
i used 2.0ghz about a week daily use. But now im lowered it to 1.8ghz and it is stable my everyday use. and battery lenght is very good maybe better than stock (i made undervoltage, so cpu uses -50mv less power in any speed than normaly/stock )1.8ghz use 1150mv and lowest speed use 775 mv)
Click to expand...
Click to collapse
on tf300t? what kernel?
anthraxx90 said:
on tf300t? what kernel?
Click to expand...
Click to collapse
yep on tf300, and i compiled kernel myself, adding these features on it. So it is no downloadable this moment.
ok, and it's normal random reboot on 1,6 ghz? the problem is voltage or kernel?
anthraxx90 said:
ok, and it's normal random reboot on 1,6 ghz? the problem is voltage or kernel?
Click to expand...
Click to collapse
well, if you raise voltage up it may help, but i thing the problem is, that every tablet cpu is "diffrent" than other. This i mean, that these cpu is specsed in other speed than 1.6, 1,8 or 2.0ghz, and some invidiuals might work good in these higher speeds, some get randon reboots / freeze, or some of cpu:s dont even boot higher speeds. (i found out that when few people test my kernel, and it not even booted. And someone it will work fine.) This thing can "cross" by made kernel force cpu speed 1.0ghz at bootup (and i made this my kernel)
Also these tf300 tablet is manufactured atleast couple of diffrent cpu type /cpu id, so kernel have to had support all of these overclocking
It just like computers, some cpu can overclock higher than others, and if you go too high you need extra cooling, and in tablets, it is not possible, like normal pc's
*Most of this is my conclusion only, it may not be 100% accurate truth, but this how i see this thing. And if someone knows better etc, you can correct me *
Niksunen said:
well, if you raise voltage up it may help, but i thing the problem is, that every tablet cpu is "diffrent" than other. This i mean, that these cpu is specsed in other speed than 1.6, 1,8 or 2.0ghz, and some invidiuals might work good in these higher speeds, some get randon reboots / freeze, or some of cpu:s dont even boot higher speeds. (i found out that when few people test my kernel, and it not even booted. And someone it will work fine.) This thing can "cross" by made kernel force cpu speed 1.0ghz at bootup (and i made this my kernel)
Also these tf300 tablet is manufactured atleast couple of diffrent cpu type /cpu id, so kernel have to had support all of these overclocking
It just like computers, some cpu can overclock higher than others, and if you go too high you need extra cooling, and in tablets, it is not possible, like normal pc's
*Most of this is my conclusion only, it may not be 100% accurate truth, but this how i see this thing. And if someone knows better etc, you can correct me *
Click to expand...
Click to collapse
ok when do you release ur kernel's download? i wanna try
anthraxx90 said:
ok when do you release ur kernel's download? i wanna try
Click to expand...
Click to collapse
Well im not home right now, so i dont have any 2.0ghz or 1,8ghz kernel with me, i have only 1.7ghz oc kernel, so you can test it if you want. But just like always, im not taking any responsibility, so test /use it with own risk. https://www.dropbox.com/s/vvmti4knwkeflde/Nixu_Kernel_OC_1700_v0.1_alpha.zip
i'm afraid now loool, what would happen exactly?
after flashing the kernel is locked to the screen asus, does not want to start
That won't happen I flashed it
Sent from my SGH-T989 using xda app-developers app
So I was wondering about the truth behind the risks of frying your cpu through overclocking or the chip itself degrading faster over time, and if there are such risks do they apply to a simple 2.5 ghz overclocking ?
There isn't any risk like that, unless you are using extremely high voltage, or are at terribly hot place.
I have tested all the overclockable kernels, and haven't found a single one which is steady at 2.6 or 2.8 GHz. Only Faux's kernel at 2490 MHz is stable.
Don't be scared, there's no risk.
PS: I personally use Performance governor by the way, so the CPU is always at max frequency, against all advice I keep using that for past three years, never had a problem, and you can understand where I live the temperature reaches extremely high in summer, so...
devilsdouble said:
There isn't any risk like that, unless you are using extremely high voltage, or are at terribly hot place.
I have tested all the overclockable kernels, and haven't found a single one which is steady at 2.6 or 2.8 GHz. Only Faux's kernel at 2490 MHz is stable.
Don't be scared, there's no risk.
PS: I personally use Performance governor by the way, so the CPU is always at max frequency, against all advice I keep using that for past three years, never had a problem, and you can understand where I live the temperature reaches extremely high in summer, so...
Click to expand...
Click to collapse
That's actually comforting I too am using fauxclock and I live in Egypt so the temperature gets pretty high here, but I'm constantly monitoring the cpu's temperature so I will give the 2.5 ghz overclock a try for a while and see how it goes.
MohamedOMostafa said:
That's actually comforting I too am using fauxclock and I live in Egypt so the temperature gets pretty high here, but I'm constantly monitoring the cpu's temperature so I will give the 2.5 ghz overclock a try for a while and see how it goes.
Click to expand...
Click to collapse
Yeah do that. Just to see if the OC is stable run that damn Antutu benchmark. If the device doesn't reboot/stuck then OC is stable
Best of luck.
devilsdouble said:
Yeah do that. Just to see if the OC is stable run that damn Antutu benchmark. If the device doesn't reboot/stuck then OC is stable
Best of luck.
Click to expand...
Click to collapse
That's the first thing I did actually
MohamedOMostafa said:
That's the first thing I did actually
Click to expand...
Click to collapse
Ha ha. Good. That's on Faux right? I got almost same score (44.7k) when I was checking.
Now if you want more then flash one of those 2.6 or 2.8 GHz kernels, and do the test, and message me if Antutu finishes the benchmark even once
devilsdouble said:
Ha ha. Good. That's on Faux right? I got almost same score (44.7k) when I was checking.
Now if you want more then flash one of those 2.6 or 2.8 GHz kernels, and do the test, and message me if Antutu finishes the benchmark even once
Click to expand...
Click to collapse
will do.
If you want higher you should try out Ultimate Kernel. Although it is removed from XDA, you can still find it on some foreign language site. It's the highest and most stable OC kernel I have used (3.0GHz).
Graffiti Exploit said:
If you want higher you should try out Ultimate Kernel. Although it is removed from XDA, you can still find it on some foreign language site. It's the highest and most stable OC kernel I have used (3.0GHz).
Click to expand...
Click to collapse
3.0 GHz
any benchmark screenshots ??
Graffiti Exploit said:
If you want higher you should try out Ultimate Kernel. Although it is removed from XDA, you can still find it on some foreign language site. It's the highest and most stable OC kernel I have used (3.0GHz).
Click to expand...
Click to collapse
Hmm, just found the topic, and it's mentioned that the topic was close due to non-compliance with the GNU GPLv2 and XDA forum rules, now what's the former thing?
Anyone has the latest version, if it's still updated outside XDA? Want to try it.
djak272 said:
3.0 GHz
any benchmark screenshots ??
Click to expand...
Click to collapse
Sorry cleaned up my screenshots folder as it was taking up a lot of space. Besides Antutu has been constantly getting updates so it may not be accurate.
devilsdouble said:
Hmm, just found the topic, and it's mentioned that the topic was close due to non-compliance with the GNU GPLv2 and XDA forum rules, now what's the former thing?
Anyone has the latest version, if it's still updated outside XDA? Want to try it.
Click to expand...
Click to collapse
I don't know if this is allowed but here it is.
v72
http://www.android-hilfe.de/custom-...ernel-kitkat-tw-only-ultimate-kernel-v72.html
v73
https://www.androidsource.club/foru...kernel-ultimate-kernel-v73-galaxy-note-3.html
Last one I used was v63. So do test it out more because I cannot vouch for the updates. But based from experience, I have never gotten an unstable update from that kernel.
Graffiti Exploit said:
Sorry cleaned up my screenshots folder as it was taking up a lot of space. Besides Antutu has been constantly getting updates so it may not be accurate.
I don't know if this is allowed but here it is.
v72
http://www.android-hilfe.de/custom-...ernel-kitkat-tw-only-ultimate-kernel-v72.html
v73
https://www.androidsource.club/foru...kernel-ultimate-kernel-v73-galaxy-note-3.html
Last one I used was v63. So do test it out more because I cannot vouch for the updates. But based from experience, I have never gotten an unstable update from that kernel.
Click to expand...
Click to collapse
Thanks a lot for the link mate. Downloaded and flashed v73, but I can't get it past the stock clock rate of 2265 MHz! I mean I have tried to set higher frequency than that in S Tweaks, even downloaded Trickstar, SetCPU, but the it'd just stuck at 2265 MHz! I can go lower than 2265 but not higher! Weird!
devilsdouble said:
Thanks a lot for the link mate. Downloaded and flashed v73, but I can't get it past the stock clock rate of 2265 MHz! I mean I have tried to set higher frequency than that in S Tweaks, even downloaded Trickstar, SetCPU, but the it'd just stuck at 2265 MHz! I can go lower than 2265 but not higher! Weird!
Click to expand...
Click to collapse
I think it comes with 2 apps for customization. You apply frequency on the first one and open the other and select apply changes. I'm not sure if it was this kernel or was it AEL. Lol. Anyways good luck. Maybe your ROM doesn't support a certain "stuff". I'm sorry but I really forgot about those terminologies. You can read up on the closed thread if you want. I'm sure you'll have a clue or on that link I gave you. *Google Translate ftw*