Hi, how can i overclock my tf300t (Clean rom 2.5 oveclock 1.6ghz) to 2.0 Ghz? i read something in the forum but there isn't any kind of guide, i want know if the tablet is stable with this frequency, and if i risk something.
thanks
anthraxx90 said:
Hi, how can i overclock my tf300t (Clean rom 2.5 oveclock 1.6ghz) to 2.0 Ghz? i read something in the forum but there isn't any kind of guide, i want know if the tablet is stable with this frequency, and if i risk something.
thanks
Click to expand...
Click to collapse
Why would you need to overclock so high? Do you want it to explode! xD
Seriously though, would probably advise against it. It's like a whole 700/800 MHz higher than it's meant to run at stock. I'd say it would be very unstable, and probably wouldn't get very far battery-life-wise. 1.6GHz really not enough :/
mozyman said:
Why would you need to overclock so high? Do you want it to explode! xD
Seriously though, would probably advise against it. It's like a whole 700/800 MHz higher than it's meant to run at stock. I'd say it would be very unstable, and probably wouldn't get very far battery-life-wise. 1.6GHz really not enough :/
Click to expand...
Click to collapse
1.6ghz is ok? or i'll risk something?
I did that speed already. But it is very very unstable. random reboots within 10 minutes of use. also the battery life is very low. and the whole tablet is to hot.
i only was using it to see how fast it could go. that was the max. i am at Cutom Rom - 07/10/2012 - [email protected] Edition V02 - The Ultra Fast Rom - based on last Asus Firmware 10.4.2.13 at this moment.
this is very stable. balanced speed is 1.3 and thats oke. Normal performance speed is 1.6 but i only use that when playing games. You dont need those high speeds for daily use.
If you have the financial means to buy a new tablet - you can try all the time to work on this frequency.
With 1,6ghz i'll risk to break the tablet?
i used 2.0ghz about a week daily use. But now im lowered it to 1.8ghz and it is stable my everyday use. and battery lenght is very good maybe better than stock (i made undervoltage, so cpu uses -50mv less power in any speed than normaly/stock )1.8ghz use 1150mv and lowest speed use 775 mv)
Niksunen said:
i used 2.0ghz about a week daily use. But now im lowered it to 1.8ghz and it is stable my everyday use. and battery lenght is very good maybe better than stock (i made undervoltage, so cpu uses -50mv less power in any speed than normaly/stock )1.8ghz use 1150mv and lowest speed use 775 mv)
Click to expand...
Click to collapse
on tf300t? what kernel?
anthraxx90 said:
on tf300t? what kernel?
Click to expand...
Click to collapse
yep on tf300, and i compiled kernel myself, adding these features on it. So it is no downloadable this moment.
ok, and it's normal random reboot on 1,6 ghz? the problem is voltage or kernel?
anthraxx90 said:
ok, and it's normal random reboot on 1,6 ghz? the problem is voltage or kernel?
Click to expand...
Click to collapse
well, if you raise voltage up it may help, but i thing the problem is, that every tablet cpu is "diffrent" than other. This i mean, that these cpu is specsed in other speed than 1.6, 1,8 or 2.0ghz, and some invidiuals might work good in these higher speeds, some get randon reboots / freeze, or some of cpu:s dont even boot higher speeds. (i found out that when few people test my kernel, and it not even booted. And someone it will work fine.) This thing can "cross" by made kernel force cpu speed 1.0ghz at bootup (and i made this my kernel)
Also these tf300 tablet is manufactured atleast couple of diffrent cpu type /cpu id, so kernel have to had support all of these overclocking
It just like computers, some cpu can overclock higher than others, and if you go too high you need extra cooling, and in tablets, it is not possible, like normal pc's
*Most of this is my conclusion only, it may not be 100% accurate truth, but this how i see this thing. And if someone knows better etc, you can correct me *
Niksunen said:
well, if you raise voltage up it may help, but i thing the problem is, that every tablet cpu is "diffrent" than other. This i mean, that these cpu is specsed in other speed than 1.6, 1,8 or 2.0ghz, and some invidiuals might work good in these higher speeds, some get randon reboots / freeze, or some of cpu:s dont even boot higher speeds. (i found out that when few people test my kernel, and it not even booted. And someone it will work fine.) This thing can "cross" by made kernel force cpu speed 1.0ghz at bootup (and i made this my kernel)
Also these tf300 tablet is manufactured atleast couple of diffrent cpu type /cpu id, so kernel have to had support all of these overclocking
It just like computers, some cpu can overclock higher than others, and if you go too high you need extra cooling, and in tablets, it is not possible, like normal pc's
*Most of this is my conclusion only, it may not be 100% accurate truth, but this how i see this thing. And if someone knows better etc, you can correct me *
Click to expand...
Click to collapse
ok when do you release ur kernel's download? i wanna try
anthraxx90 said:
ok when do you release ur kernel's download? i wanna try
Click to expand...
Click to collapse
Well im not home right now, so i dont have any 2.0ghz or 1,8ghz kernel with me, i have only 1.7ghz oc kernel, so you can test it if you want. But just like always, im not taking any responsibility, so test /use it with own risk. https://www.dropbox.com/s/vvmti4knwkeflde/Nixu_Kernel_OC_1700_v0.1_alpha.zip
i'm afraid now loool, what would happen exactly?
after flashing the kernel is locked to the screen asus, does not want to start
That won't happen I flashed it
Sent from my SGH-T989 using xda app-developers app
Related
hi guyz, i have a little question for you
does someone have an hd2 with android witch is overclocked to over 1ghz? 1.5ghz too? and, is it a warried operation or cpu has a low overhead in that situation?
3rd and last question, if i put my hd2 in 1.5ghz mode, and force a bench test, may i broke my hd2 with going upper than cpu Tjunction or there's a system protection witch shuts down all the hardware else the cpu is too close to Tjunction? (like normally pc cpu)
i don't know if snapdragon has system protection, so, i don't want to try to fuse my hd2 (it's my main phone)
and, for users who whant to know, yep, i'm using wp7 because it's smoother than android, but, if i try to use android with that overlock, may it can be smooth like wp7, maybe
and, please, don't say that android is smooth, because it has some micro freeze in the continuity of the animation, and i hate that
thank you for your answers
iba21 said:
hi guyz, i have a little question for you
does someone have an hd2 with android witch is overclocked to over 1ghz? 1.5ghz too? and, is it a warried operation or cpu has a low overhead in that situation?
3rd and last question, if i put my hd2 in 1.5ghz mode, and force a bench test, may i broke my hd2 with going upper than cpu Tjunction or there's a system protection witch shuts down all the hardware else the cpu is too close to Tjunction? (like normally pc cpu)
i don't know if snapdragon has system protection, so, i don't want to try to fuse my hd2 (it's my main phone)
and, for users who whant to know, yep, i'm using wp7 because it's smoother than android, but, if i try to use android with that overlock, may it can be smooth like wp7, maybe
and, please, don't say that android is smooth, because it has some micro freeze in the continuity of the animation, and i hate that
thank you for your answers
Click to expand...
Click to collapse
I have used setcpu, overlocked to max, didnt brick my hd2
yz.hd said:
I have used setcpu, overlocked to max, didnt brick my hd2
Click to expand...
Click to collapse
are you using it now? in 1.5ghz mode?
yz.hd said:
I have used setcpu, overlocked to max, didnt brick my hd2
Click to expand...
Click to collapse
thank you so much
You can set your clock to max, but make a profile to downclock your cpu speed to ~500 MHZ when it heats up.
Dr.Move said:
You can set your clock to max, but make a profile to downclock your cpu speed to ~500 MHZ when it heats up.
Click to expand...
Click to collapse
oh, you could make a profile with downlcloking when cpu goes to a specific temperature?
nice, what's the tjunction of snapdragon? is 50°C too hight?
not sure, to be honest, I don't overclock my device. too scared to do so :/
but when I did overclock it I set the temperature to 41-42 Celsius.
you can tell that I got a lot of high temp warnings, safe is better than sorry.
iba21 said:
are you using it now? in 1.5ghz mode?
Click to expand...
Click to collapse
no, not using it, uninstalled it, because it makes my phone randomly reboot + it can brick your phone (little chance for that) but me no like overheating
How to get to 1.5?
SetCPU only let's me go till 1.2 ghz..
Delano.888 said:
SetCPU only let's me go till 1.2 ghz..
Click to expand...
Click to collapse
You need a kernel that allows overclocking
Delano.888 said:
SetCPU only let's me go till 1.2 ghz..
Click to expand...
Click to collapse
different builds use different kernels, and each support different max CPU speeds. If the kernel supports overclocking, the developer usually mentions than in the first post. Note that Some kernels/builds do not support any kind of overclocking, so the max CPU speed would be ~988 MHz
Hey everyone...I tell ya, I sure am enjoying all these awesome custom roms and kernels. Great job to all the developers here, putting in the blood, sweat, and tears for the advancement of the community, thank you so much. One feature that I saw in a Xoom build was the GPU overclocked, and while I'm sure it won't interest everyone, and there is probably only little gain to be had from it, I would love to have the option to oc the CPU and the GPU for the highest performance possible...please. Well I think that covers it unless someone else shares my desire to see this feature. Thanks for all your work and consideration XDA and have a great day.
if ur CPU OC than GPU too
Apparently not so on the Motorola Xoom as there are two versions of Tiamat 1.4.4... with and without GPU OC. Tiamat 1.4.4 Full Throttle
cq842000 said:
Apparently not so on the Motorola Xoom as there are two versions of Tiamat 1.4.4... with and without GPU OC. Tiamat 1.4.4 Full Throttle
Click to expand...
Click to collapse
oc-ing the gpu doesnt get you anything... gpu is default 200mhz 2d with 300mhz in 3d and it can be uped to 250mhz 2d and 400mhz 3d but it cant be software controlled and it will eat more power...
and no oc-ing the cpu doesn't oc the gpu, its a separate part of the tegra2 processor
Hey Thor, thanks for joining the conversation. Based on what youve seen so far, how well are the tegra GPU cores being utilized? Suffice to say I've pulled off insane desktop GPU overclocks that showed almost nill gain with drivers that werent mature in which the GPU cores werent being loaded past 50% . I realize that the tegra is a horse of a different color, but isnt it still affected by the specific driver optimizations, hence the THD enhancements? Just out of curiosity as I very much trust your experience. I am still interested in trying it with definitive comparisons to follow...well about as definitive as synthetic benchmarks can be anyway.
I just saw that you have a new beta... Yay. I cant wait to give it a whirl.
I have been over locked for a little while. Max I have done is 1506 but it tends to be slightly unstable. I run 1400 now and haven't had any issues. biggest difference I notice is home screen transitions load fast and don't lag and programs load much quicker. there doesnt seem to be any games that will push the CPU hard so I don't notice much of a difference there.
.
specd_out said:
I have been over locked for a little while. Max I have done is 1506 but it tends to be slightly unstable. I run 1400 now and haven't had any issues. biggest difference I notice is home screen transitions load fast and don't lag and programs load much quicker. there doesnt seem to be any games that will push the CPU hard so I don't notice much of a difference there.
.
Click to expand...
Click to collapse
I've had 1600mhz going strong with no instability, benchmark after benchmark, the only issue I've had is the device shutting down when left alone for too long, but I consider that a useful standard function. Otherwise 1600 performance has been rock solid. I decided to take it upon myself to take this girl apart' clean the CPU off, remove the thermal pad, and apply some as5....though the chip didnt really run very hot to begin with. Now until I have the option to go for 1800mhz, I'd like to see where the max threshold is for cpu/gpu oc.
I have mine overclocked also at 1600.. Runs very stable at this speed and benchmarks not too bad:
http://imageshack.us/photo/my-images/20/device20110712225412.png/
I have had higher speeds, but very unstable...
thor2002ro said:
oc-ing the gpu doesnt get you anything... gpu is default 200mhz 2d with 300mhz in 3d and it can be uped to 250mhz 2d and 400mhz 3d but it cant be software controlled and it will eat more power...
and no oc-ing the cpu doesn't oc the gpu, its a separate part of the tegra2 processor
Click to expand...
Click to collapse
Can only the 3D Clocks be altered without touching 2D? If yes can you make such a version of the ........... that "nobody" knows anything about?
Trinnity66 said:
I have mine overclocked also at 1600.. Runs very stable at this speed and benchmarks not too bad:
http://imageshack.us/photo/my-images/20/device20110712225412.png/
I have had higher speeds, but very unstable...
Click to expand...
Click to collapse
Very nice quadrant score man, I used to score alot higher until I updated to stock 3.1+ updates. It seems like the higher my OS version number gets, the lower my synthetic performance gets overall.
cq842000 said:
I've had 1600mhz going strong with no instability, benchmark after benchmark, the only issue I've had is the device shutting down when left alone for too long, but I consider that a useful standard function. Otherwise 1600 performance has been rock solid. I decided to take it upon myself to take this girl apart' clean the CPU off, remove the thermal pad, and apply some as5....though the chip didnt really run very hot to begin with. Now until I have the option to go for 1800mhz, I'd like to see where the max threshold is for cpu/gpu oc.
Click to expand...
Click to collapse
that's what mine did. it would reboot while sleeping. sometimes it would be 3 or 4 times in an hour.
Trinnity66 said:
I have mine overclocked also at 1600.. Runs very stable at this speed and benchmarks not too bad:
I have had higher speeds, but very unstable...
Click to expand...
Click to collapse
Wow!
Umm, what rom do you guys run for this? I'm on rooted and CWMd stock 3.1 rom. Can't find a OC kernel for it. Only one I can find is for ASUS based roms. I prefer to keep stock rom if it's possible.
ME: Asus A500 Iconia USA wifi only. HC 3.1
nexgenasian said:
Wow!
Umm, what rom do you guys run for this? I'm on rooted and CWMd stock 3.1 rom. Can't find a OC kernel for it. Only one I can find is for ASUS based roms. I prefer to keep stock rom if it's possible.
ME: Asus A500 Iconia USA wifi only. HC 3.1
Click to expand...
Click to collapse
You should try richardtrip's kernel. His kernel is keep updating Very good performance and stability.
thats the kernel i am using o/c 1400 works very well. you can find it in the development thread.
ardatdat said:
You should try richardtrip's kernel. His kernel is keep updating Very good performance and stability.
Click to expand...
Click to collapse
Thanks! Works great. Do you feel the HoneyVillian rom runs faster with the v2.4 Kernel or about the same as stock Acer 3.1 HC rom with v2.4 Kernel?
So far I can keep stable at 1.5 after 2 hours of use. It's also slept for 30 mins and seems ok at that too.
Also what kind of Scaling do you guys use? Ondeman, Interactive? On my phone I use ondemand.
So in CM7 there is an option to overclock the Desire Z.
Now my question is if I can do this without having to worry about damaging my phone?
For example, the desire Z has a 800MHZ processor, so will it damage my phone to overclock it to 1000MHZ? Or maybe 1200 MHZ?
whitis said:
So in CM7 there is an option to overclock the Desire Z.
Now my question is if I can do this without having to worry about damaging my phone?
For example, the desire Z has a 800MHZ processor, so will it damage my phone to overclock it to 1000MHZ? Or maybe 1200 MHZ?
Click to expand...
Click to collapse
well it depends if your kernel allows overclocking to that speeds. if it dosent its very risky but if it does support it then its not that risky. for me i have e kernel that goes to 1.7 ghz so i safely clocked it to 1.5 ghz
Sorry, I'm really a noob, but what kernel do I have with CM7?
And where can I get other kernels?
whitis said:
Sorry, I'm really a noob, but what kernel do I have with CM7?
And where can I get other kernels?
Click to expand...
Click to collapse
sorry but i dont sure CM7, im using virtuous unity rom so i wouldnt know. but im sure your using the stock kernel that comes with cm7. just ask someone who has cm7. also there are a wide variety of kernels that you can use. just search them up on google or the xda developer forums
The CM 7 Kernal will allow you to overclock up to 1.5ghz (which for the DZ/G2 seems to be the consensus of a 'safe' overclock)
One thing to remember is that not all processors are created equal. Meaning that although we all have the same processor in our phone, some processors are able to handle overclocking better than others. It also depends on what you use your phone for and how much you need the overclock for what you are doing. I ran my device at 1.2 ghz for a while and now run it at 1ghz as it feels plenty fast to me. When playing some graphic intensive games, a higher overclock may help performance as well.
If you overclock and your phone starts to act up, then dial it down a bit. 1.5ghz is fast as hell but will alter voltage and affect battery life as well. Just play around with and see where you like your CPU speed to be at. But you shouldn't have to worry about damaging the processor by overclocking. If its more than it can handle, you will know quickly and can tone it down.
So just for example if I'm going to use Virtious(I quit because it's lagging on the Desire Z) and install this kernel and overclock my desire z up to 1,500 mhz, virtious should run way smoother, right?
evilcuber said:
well it depends if your kernel allows overclocking to that speeds. if it dosent its very risky but if it does support it then its not that risky. for me i have e kernel that goes to 1.7 ghz so i safely clocked it to 1.5 ghz
Click to expand...
Click to collapse
if your kernel doesn't support overclocking, you can't overclock no matter what... there is nothing "unsafe" about overclocking without an overclocking kernel because it cannot be done.
OP: cyanogen has its own overclocking kernel (with capability up to 1516mhz) built-in. as far as safety, it depends on your device, but the most common worst-case scenario is random restarting issues or waking issues.
on CM7, with a launcher other than the bundled ADW launcher which is choppy and slow no matter how high you're clocked, you should be able to have a smooth experience at stock speeds. I am clocked at between 1017 and 1209mhz at any given point as I have been since January and I haven't ever experienced wake or random reboot issues. YMMV but I think the general consensus for the Vision is that a mild overclock is very safe.
HELP!
I overclocked my DZ, but didn't really notice any difference, since CM7 is pretty smooth without overclocking, but know suddenly my device begins to lag very very bad. I put the CPU limit back to 245MHZ to 806MHZ but it keeps lagging:-(
whitis said:
HELP!
I overclocked my DZ, but didn't really notice any difference, since CM7 is pretty smooth without overclocking, but know suddenly my device begins to lag very very bad. I put the CPU limit back to 245MHZ to 806MHZ but it keeps lagging:-(
Click to expand...
Click to collapse
which governor are you using? which launcher? have you rebooted?
hey folks,
I would like to know what is the maximum stable overclock possibe for zte blade.
Im using cm7 nightlies and the max overclock frequency i can see is 864MHz. But my device will be stable only upto 691MHz or 710MHz.
What is your blade's max stable overclock.?
I heard some other android devices can be overclocked to their maximum value and remain stable at that value. What about ZTE blade. I think blade gets a lot of performance if it reaches stable at 864MHz. I don't bother the battery life or overheating really.
Is there any hack or something like that.?
672 max stable for me, my old one did 748. depends on your phone.
Has anybody had it over 800 stable?
wbaw said:
672 max stable for me, my old one did 748. depends on your phone.
Has anybody had it over 800 stable?
Click to expand...
Click to collapse
once i used the userspace governor and got it to 806mhz and it was absolutely stable.
saaransh9 said:
once i used the userspace governor and got it to 806mhz and it was absolutely stable.
Click to expand...
Click to collapse
I think it doesn't really change the speed with that governor, it's designed so you use a program to set the speed yourself, except none exist, I assume it doesn't work at all without it. It needs something to write the desired speed to a system device, if nothing does that then it'll just stay at the same speed.
Test new speeds with performance governor, that keeps the cpu at it's maximum speed, it's not ideal for battery life but you can see if it really is stable at that speed.
I got my blade to 806 mhz, too. I stress tested it with setCPU, and it was stable.
I didn't have the guts to test higher than 806, though.
and I don't leave my phone on overclock.
cowscrubber said:
I got my blade to 806 mhz, too. I stress tested it with setCPU, and it was stable.
I didn't have the guts to test higher than 806, though.
and I don't leave my phone on overclock.
Click to expand...
Click to collapse
Just make sure that it isn't set to overclock on boot when you're testing higher speeds. Then the worst that can happen is it crashes & you know it doesn't work. Needs to be done in the name of science, so I know if it's worth enabling 864mhz & above in my kernels, or if nobody can ever get that high.
Nobody has managed to overvolt our cpu (msm7227) yet, I checked Google, it's probably not realistic to hope for it. I'm not sure it's possible at all. So whatever the maximum stable speed for your phone is, you're stuck with it, it'll never get any faster.
wbaw said:
Just make sure that it isn't set to overclock on boot when you're testing higher speeds. Then the worst that can happen is it crashes & you know it doesn't work. Needs to be done in the name of science, so I know if it's worth enabling 864mhz & above in my kernels, or if nobody can ever get that high.
Nobody has managed to overvolt our cpu (msm7227) yet, I checked Google, it's probably not realistic to hope for it. I'm not sure it's possible at all. So whatever the maximum stable speed for your phone is, you're stuck with it, it'll never get any faster.
Click to expand...
Click to collapse
i dont think then galaxy 3 1ghz is possible that someone was talking about without overvolting
My blade can go to 748, over its reboot after 10min at performance governor
saaransh9 said:
i dont think then galaxy 3 1ghz is possible that someone was talking about without overvolting
Click to expand...
Click to collapse
Idk, but my brother have a galaxy 3 and it's satble at 1.3Ghz..., when you read thread about kernel there is no OV
Send from my awsome ZTE Blade!
saaransh9 said:
i dont think then galaxy 3 1ghz is possible that someone was talking about without overvolting
Click to expand...
Click to collapse
It's a totally different cpu to the blade. I could add an option to make your phone run at 1ghz if you want, but it'll just crash straight away, the samsung has a faster & different cpu. We'd need more volts to even attempt it.
Your phone will never run faster than 710mhz stable, if that's what you can get. There is no possible way, other than buying a different phone, to make it run any faster.
I'm still interested to see if anybody can actually run their phone at 864mhz without it crashing, for those few people, they might be able to go faster.
@wbaw , thanks for the info.
Surprised to hear that no one attempted to overvolt msm7227 . I feel it is still a great cpu with adreno 200 included and many current low end phones are having it.
i can get 748 on performance i had it for about half an hour with no reboots
I saw on Antutu benchmark that some people got their blades to 1.5 ghz.
It's probably a hoax.
cowscrubber said:
I saw on Antutu benchmark that some people got their blades to 1.5 ghz.
It's probably a hoax.
Click to expand...
Click to collapse
Yeah, had see some with 3000 points, but its a build prop hack or somethings like this
Send from my awsome ZTE Blade!
Hm... The highest CPU rate without crashing was 710 Mhz for my Blade. Any higher values causes a unstable work or just rebooting.
My blade can handle 748 with sd writing but without 806 (but if you write to sd it crashes)
Sent from my GT-I9100 using XDA App
My blade have 710Mhz as most stable overclock, if i try 748Mhz Blade freeze.
Sent from my LG-P970 using XDA App
729MHz is stable. 748MHz used to freeze sometimes.
729 Mhz with SmartAssV2 & CM7.
748 is stable with Performance governor for me,even on reboot. Haven't tried 768 and above.
Sent from my Blade using XDA app
My device runs at 748M and stable, but crash if faster.
So I was wondering about the truth behind the risks of frying your cpu through overclocking or the chip itself degrading faster over time, and if there are such risks do they apply to a simple 2.5 ghz overclocking ?
There isn't any risk like that, unless you are using extremely high voltage, or are at terribly hot place.
I have tested all the overclockable kernels, and haven't found a single one which is steady at 2.6 or 2.8 GHz. Only Faux's kernel at 2490 MHz is stable.
Don't be scared, there's no risk.
PS: I personally use Performance governor by the way, so the CPU is always at max frequency, against all advice I keep using that for past three years, never had a problem, and you can understand where I live the temperature reaches extremely high in summer, so...
devilsdouble said:
There isn't any risk like that, unless you are using extremely high voltage, or are at terribly hot place.
I have tested all the overclockable kernels, and haven't found a single one which is steady at 2.6 or 2.8 GHz. Only Faux's kernel at 2490 MHz is stable.
Don't be scared, there's no risk.
PS: I personally use Performance governor by the way, so the CPU is always at max frequency, against all advice I keep using that for past three years, never had a problem, and you can understand where I live the temperature reaches extremely high in summer, so...
Click to expand...
Click to collapse
That's actually comforting I too am using fauxclock and I live in Egypt so the temperature gets pretty high here, but I'm constantly monitoring the cpu's temperature so I will give the 2.5 ghz overclock a try for a while and see how it goes.
MohamedOMostafa said:
That's actually comforting I too am using fauxclock and I live in Egypt so the temperature gets pretty high here, but I'm constantly monitoring the cpu's temperature so I will give the 2.5 ghz overclock a try for a while and see how it goes.
Click to expand...
Click to collapse
Yeah do that. Just to see if the OC is stable run that damn Antutu benchmark. If the device doesn't reboot/stuck then OC is stable
Best of luck.
devilsdouble said:
Yeah do that. Just to see if the OC is stable run that damn Antutu benchmark. If the device doesn't reboot/stuck then OC is stable
Best of luck.
Click to expand...
Click to collapse
That's the first thing I did actually
MohamedOMostafa said:
That's the first thing I did actually
Click to expand...
Click to collapse
Ha ha. Good. That's on Faux right? I got almost same score (44.7k) when I was checking.
Now if you want more then flash one of those 2.6 or 2.8 GHz kernels, and do the test, and message me if Antutu finishes the benchmark even once
devilsdouble said:
Ha ha. Good. That's on Faux right? I got almost same score (44.7k) when I was checking.
Now if you want more then flash one of those 2.6 or 2.8 GHz kernels, and do the test, and message me if Antutu finishes the benchmark even once
Click to expand...
Click to collapse
will do.
If you want higher you should try out Ultimate Kernel. Although it is removed from XDA, you can still find it on some foreign language site. It's the highest and most stable OC kernel I have used (3.0GHz).
Graffiti Exploit said:
If you want higher you should try out Ultimate Kernel. Although it is removed from XDA, you can still find it on some foreign language site. It's the highest and most stable OC kernel I have used (3.0GHz).
Click to expand...
Click to collapse
3.0 GHz
any benchmark screenshots ??
Graffiti Exploit said:
If you want higher you should try out Ultimate Kernel. Although it is removed from XDA, you can still find it on some foreign language site. It's the highest and most stable OC kernel I have used (3.0GHz).
Click to expand...
Click to collapse
Hmm, just found the topic, and it's mentioned that the topic was close due to non-compliance with the GNU GPLv2 and XDA forum rules, now what's the former thing?
Anyone has the latest version, if it's still updated outside XDA? Want to try it.
djak272 said:
3.0 GHz
any benchmark screenshots ??
Click to expand...
Click to collapse
Sorry cleaned up my screenshots folder as it was taking up a lot of space. Besides Antutu has been constantly getting updates so it may not be accurate.
devilsdouble said:
Hmm, just found the topic, and it's mentioned that the topic was close due to non-compliance with the GNU GPLv2 and XDA forum rules, now what's the former thing?
Anyone has the latest version, if it's still updated outside XDA? Want to try it.
Click to expand...
Click to collapse
I don't know if this is allowed but here it is.
v72
http://www.android-hilfe.de/custom-...ernel-kitkat-tw-only-ultimate-kernel-v72.html
v73
https://www.androidsource.club/foru...kernel-ultimate-kernel-v73-galaxy-note-3.html
Last one I used was v63. So do test it out more because I cannot vouch for the updates. But based from experience, I have never gotten an unstable update from that kernel.
Graffiti Exploit said:
Sorry cleaned up my screenshots folder as it was taking up a lot of space. Besides Antutu has been constantly getting updates so it may not be accurate.
I don't know if this is allowed but here it is.
v72
http://www.android-hilfe.de/custom-...ernel-kitkat-tw-only-ultimate-kernel-v72.html
v73
https://www.androidsource.club/foru...kernel-ultimate-kernel-v73-galaxy-note-3.html
Last one I used was v63. So do test it out more because I cannot vouch for the updates. But based from experience, I have never gotten an unstable update from that kernel.
Click to expand...
Click to collapse
Thanks a lot for the link mate. Downloaded and flashed v73, but I can't get it past the stock clock rate of 2265 MHz! I mean I have tried to set higher frequency than that in S Tweaks, even downloaded Trickstar, SetCPU, but the it'd just stuck at 2265 MHz! I can go lower than 2265 but not higher! Weird!
devilsdouble said:
Thanks a lot for the link mate. Downloaded and flashed v73, but I can't get it past the stock clock rate of 2265 MHz! I mean I have tried to set higher frequency than that in S Tweaks, even downloaded Trickstar, SetCPU, but the it'd just stuck at 2265 MHz! I can go lower than 2265 but not higher! Weird!
Click to expand...
Click to collapse
I think it comes with 2 apps for customization. You apply frequency on the first one and open the other and select apply changes. I'm not sure if it was this kernel or was it AEL. Lol. Anyways good luck. Maybe your ROM doesn't support a certain "stuff". I'm sorry but I really forgot about those terminologies. You can read up on the closed thread if you want. I'm sure you'll have a clue or on that link I gave you. *Google Translate ftw*