Hello all together,
currently I'm having trouble with flashing ICS to a HD2. On that device there was a gingerbread version installed before.
The device is flashed with 2.08.HSPL and Radio 2.15.50.14. (These versions were already installed before).
I reflashed magldr 1.13 with Clockword mod 5.0.2.6. (After short trying CLK Loader). magldr is loading and I'm
selecting AD Recovery. Now I'm having the issue that the recovery is loading and rebooting direcly or rebooting
after showing the recovery screen for one second.
Absolutley weird is that if I plug out the usb cable the HD2 imediatly goes off and I'm not able to power it on again.
If I plug in the cable again the device is powering on automatically.
Could it be that the accumulator is empty (maybe it's weak and I tried several flashs). Will that produce my issues with the
recovery ?
Hope you could help me...
greetings Chris
cmueller85 said:
Hello all together,
currently I'm having trouble with flashing ICS to a HD2. On that device there was a gingerbread version installed before.
The device is flashed with 2.08.HSPL and Radio 2.15.50.14. (These versions were already installed before).
I reflashed magldr 1.13 with Clockword mod 5.0.2.6. (After short trying CLK Loader). magldr is loading and I'm
selecting AD Recovery. Now I'm having the issue that the recovery is loading and rebooting direcly or rebooting
after showing the recovery screen for one second.
Absolutley weird is that if I plug out the usb cable the HD2 imediatly goes off and I'm not able to power it on again.
If I plug in the cable again the device is powering on automatically.
Could it be that the accumulator is empty (maybe it's weak and I tried several flashs). Will that produce my issues with the
recovery ?
Hope you could help me...
greetings Chris
Click to expand...
Click to collapse
You're battery is probably flat, and you can't charge the phone when it's off in MAGLDR, so when you plug it in it powers on, but then when it can't charge it powers off again, as it doesn't have any power, causing a bootloop. Basically you'll have to cut open a Micro USB cable and charge the phone manually, or if you have a spare HD2/a friend's HD2 running cLK or WinMo charge it in their phone. Then follow the guides as normal to flash Android.
or it could be a bent battery pin...?
Related
Hi there,
I usually am able to fix things on my own, but I'm a bit stuck here...
Here are the symptoms:
Android rom = unable to boot up my HD2 beyond the GO GO GO! screen
Win 7 Rom = after GO GO GO!, screen flashes to the DFT logo, then reboots
Stock TMO rom = stuck after the "Get Together" screen
Phone = TMOUS HD2
SPL-2.08.HSPL 8G XE
I did the following a few different ways:
Task29 the phone
Install MAGLDR 1.13
I have tried to install clockworkmod 1.3 but cannot access it after selecting AD Recovery (stuck at GO GO GO again!)
Load a custom ROM using the USB Flasher - everything goes well!
Reboot - one of the above symptoms kicks in. Phone no go.
I have tried wiping the device, removing HSPL, reinstalling HSPL, using various ROMs and it won't boot beyond the MAGLDR.
This will be the second LEO to flake out on me in the past six months.
Is it doomed?
Thanks in advance for your help...
You forgot to mention one important information, What radio are you using ?
It could be the problem, and did you try to flash a different one ?
also dont try and boot to an OS with the USB cable attached, always restarts for me, same goes for charging it via a USB cable in to a power adaptor.
Yeah!
kawazaki said:
You forgot to mention one important information, What radio are you using ?
It could be the problem, and did you try to flash a different one ?
Click to expand...
Click to collapse
Bingo!
I don't know what version I had, but I upped it to 2.09.50.29_2 and I'm up and running!!
Huge thanks!
same problem
I had same problem. I installed android and got this GO GO GO! error. I took out the battery and reinsert like 10 times and finnaly got it working. If I turn of the phone then Im fu*ck*d again
i have the same problem.
My hd2 is also stucked in go go go.
Just flashed radio: Leo_RADIO_2.15.50.14
MAGLDR 150MB System/5MB Cache (ClockworkMod Recovery v3.0.2.5)
and the rom: TyphooN CyanogenMod 7
Everything seems ok, but now won´t start.
Can someone help, please?
So i'm pretty new to the HD2, but have flashed various ROMS etc in the past. A friend gave me his HD2 to flash Android onto, and I'm having a few problems with it.
Basically, After trying to install the MAGLDR, the phone will not boot at all. It loads up, and just sticks at the "HTC" screen. I can get into the "tri-colour" boot loader screen by doing Vol-down at startup, but whenever I try to run MAGLDR again the status bar on both the PC and the phone stay at 0%, then it errors out :\.
Any ideas how I can get this back to working? Thanks guys.
Is the phone switching to USB from SERIAL when plugged in at the SPL? Put the ROM on a SDCARD and rename it to LEOIMG.nbh then enter the SPL, it will see the ROM and allow you to flash via SDCARD. You may have a dead usb port on your hands if it's not switching to USB. Also try multiple ports on the computer and multiple computers to confirm this switch.
connexion2005 said:
Is the phone switching to USB from SERIAL when plugged in at the SPL? Put the ROM on a SDCARD and rename it to LEOIMG.nbh then enter the SPL, it will see the ROM and allow you to flash via SDCARD. You may have a dead usb port on your hands if it's not switching to USB. Also try multiple ports on the computer and multiple computers to confirm this switch.
Click to expand...
Click to collapse
Thanks for the speedy reply!
It is switching to USB when plugged in, which is good o guess. When I try to use RUU or task29, it sits at 0% for a while then goes to "Error 262". When the phone switches on (NOT into bootloader) it just sits at the "HTC" screen, and I notice the R, G, D lines are not shown at the bottom of the screen like they used to be.
I don't have an SD with me at the minute, which ROM exactly would I need to place on there?
thanks again
First enter bootloader, if spl doesn't say 2.08.hspl then magldr wont start.
Radio. radio must be a ..50.. of 2.07.50.x or higher or magldr wont start.
Hanging at 0% is either no hspl, or USB error. USB ports in front of PC generally wont work, USB hubs wont work either, ,only use USB ports around back of the PC.
samsamuel said:
First enter bootloader, if spl doesn't say 2.08.hspl then magldr wont start.
Radio. radio must be a ..50.. of 2.07.50.x or higher or magldr wont start.
Hanging at 0% is either no hspl, or USB error. USB ports in front of PC generally wont work, USB hubs wont work either, ,only use USB ports around back of the PC.
Click to expand...
Click to collapse
Guys, thanks so much. I got her to boot into MAGLDR and I *think* I got Clockwork Mod Recovery installed. I can now boot to the MAGLDR screen.
As I don't have the SD card from the phone (or any other SD at the moment), can anyone suggest a stable gingerbread ROM I can flash via USB Flasher? (ie it will need to come with the installer exe bundled right?). I'd prefer stock Android over a Sense ROM if possible, but I'll take whatever I can get
Thanks again!!
Hi,
i was just about to calibrate my battery after flashing a rom ( http://forum.xda-developers.com/showthread.php?t=827355&highlight=Battery ) To do this, the phone has to be charged while shut down... The Problem:
Everytime i shut done the phone it instantly reboots when connected to AC power... Is there any way to change that? I am using EU Leo with aMAGLDR 1.13.
Thanks, cmoe
MAGLDR doesn't support charging while off, you have two options:
1-Use cLK.
2-Use WinMo ROM.
thanks a lot !
My HD2 died today - was stuck on booting logo, MAGLDR menu wasn't coming up. I booted the phone to HSPL and attempted to flash the 2.15.50.14 radio (was temporarily using 2.12.50.02 earlier due to poor network coverage in my area). During the flash the phone's screen went black with the backlight still on and I got the flashing error in CustomRUU. I booted the HSPL again and discovered a strange issue: the HSPL screen goes black after a few seconds and the USB connection gets lost. HSPL obviously shows the ROM update error now but I can't flash the radio as the HSPL dies after a few seconds... In all occasions the backlight is still left on but nothing on the screen. Tried two batteries, both fully charged.
Please help...
P.S. Earlier configuration: HSPL 2.08, radio 2.12.50.02, MAGLDR 1.13, ClockworkMod 3.0.0.5 and Typhoon CM7 in NAND
UPDATE: I tested the phone further and it seems that until I connect the USB cable the HSPL stays on. Right after connecting the USB cable the screen goes blank. Tested using different cables, different PCs with different OSs (Win7 and Ubuntu Natty). I attempted to flash Stock ROM 1.66 from SD card (renamed extracted nbh file to leoimg.nbh) but the HSPL blinks "no image file".
Hi
I just borrowed a vater-damaged HD2 from a mate, so I could use it as a "Lab-rat". But one of it's damages was, that the volume- didn't work.
So to get the phone in boot-loader mode, I started an Officel ROM upgrade, and as soon as the phone started in boot-loader mode, I unplugged the USB cable, forced exited the update, re-plugged the USB cable and installed HSPL 2.08.
Booted to WINMO6.5 again, started the ROM upgrade again, installed the MAGLDR 1.13.
Now the phone just boots the white background with the green HTC logo, and just stalls there.
What can I do? - I can't get the phone into bootloader again as the VOL- aint working.
Anyone any idears?
Regards Lars Mortensen
Well... now the only thing you can do is fix that button. There is no other way around to get into bootloader (except for that WinMo enterbootloader.exe thing). And you can't flash anything without it.