Related
oh i got a serious problem
after I install MAGLDR 1.11 my HD2 it succeed and did reboot and then it did stuck in white screen with hTC green log.
What to do? It cannot connect it to the sync with computer when it is with this screen. I tried so many time to reset it (with pressing long the power bottom) but I didn’t get MAGLDR 1.11 boot menu, so I cannot proceed to the next step which is installing NAND
My HTD looks like with no operating system only with white screen with hTC green log, What to do? Any help PlZzZzZzZzZzzzz?
Milan Geek said:
oh i got a serious problem
after I install MAGLDR 1.11 my HD2 it succeed and did reboot and then it did stuck in white screen with hTC green log.
What to do? It cannot connect it to the sync with computer when it is with this screen. I tried so many time to reset it (with pressing long the power bottom) but I didn’t get MAGLDR 1.11 boot menu, so I cannot proceed to the next step which is installing NAND
My HTD looks like with no operating system only with white screen with hTC green log, What to do? Any help PlZzZzZzZzZzzzz?
Click to expand...
Click to collapse
Did you try reading the flashing instructions. Refer to the Flashing NAND Android rom link in my signature. The problem is that you probably have the wrong radio. Also please don't start new threads to ask questions when threads already exist. This thread will soon be moved.
Milan Geek said:
oh i got a serious problem
after I install MAGLDR 1.11 my HD2 it succeed and did reboot and then it did stuck in white screen with hTC green log.
What to do? It cannot connect it to the sync with computer when it is with this screen. I tried so many time to reset it (with pressing long the power bottom) but I didn’t get MAGLDR 1.11 boot menu, so I cannot proceed to the next step which is installing NAND
My HTD looks like with no operating system only with white screen with hTC green log, What to do? Any help PlZzZzZzZzZzzzz?
Click to expand...
Click to collapse
remove battery
enter HSPL via bootloader (have you got HSPL 2.08)??
(long press volume down + briefly press power button)
btw wrong post here mate
Moved to HD2 Android Q&A and General
I got the same problem with SPL 2.08.HSPL, oficial ROM 3.14.412.2, RADIO 2.15.50.14. I've tried everything, wasting tons of hours, reinstaling diferent versions of MAGLDR and so, but unfortunatelly I've had to back to the oficial ROM.
Help Please!
sanroman said:
I got the same problem with HSPL 2.08, oficial ROM 3.14.412.2, RADIO 2.15.50.14. I've tried everything, wasting tons of hours, reinstaling diferent versions of MAGLDR and so, but unfortunatelly I've had to back to the oficial ROM.
Help Please!
Click to expand...
Click to collapse
Are you sure your spl version is 2.08.hspl and NOT 2.08.0000?
Completly!. SPL-2.08.HSPL as stated on tricolor screen. Thanks for the response.
And you also sure of the radio version? Really strange that it doesn't work. Where exactly does it get stuck, is it after or during the install of magldr?
Absolutely sure. All info is the one shown in the device. MAGDLR installs perfectly at 100%, it stucks at reboot, it shows the white htc screen and that's all, the device doen't work any more and I've to reinstall oficial rom.
Really weird - first one I've seen where 2.08.hspl and 2.15.50 radio doesn't get magldr to boot. Not sure what else to suggest apart from perhaps doing a Task29 to format the NAND area and starting all over.
I've tried one again, including task29 at begining. And i'm still the same, MAGLDR doesn't show the menu and stucks at login htc screen. I want to cry!. I'd appreciate any idea. All DFT needs MAGDLR, I need smthing that doesn´t need MAGDLR, is it possible?.
There are the Android versions that run off sd card which run as a dual boot with winmo.
sanroman said:
I've tried one again, including task29 at begining. And i'm still the same, MAGLDR doesn't show the menu and stucks at login htc screen. I want to cry!. I'd appreciate any idea. All DFT needs MAGDLR, I need smthing that doesn´t need MAGDLR, is it possible?.
Click to expand...
Click to collapse
Check your radio version - I had the same issue but after updating my radio everything was fine!
sanroman said:
I've tried one again, including task29 at begining. And i'm still the same, MAGLDR doesn't show the menu and stucks at login htc screen. I want to cry!. I'd appreciate any idea. All DFT needs MAGDLR, I need smthing that doesn´t need MAGDLR, is it possible?.
Click to expand...
Click to collapse
well, maybe its kinda "stupid" question, but do you press the power (red) button while booting? I mean, you have to press it long enough, till the magldr menu comes up..
Believe me that i've tested that way, and another ones, so as to get it work, but no luck.
I got stuck on the htc logo screen while trying to boot to a previous NAND version I had. I flashed it right away for the first time but now I jsut got stuck on the logo screen an than its reboots, again and again. any help as now I stuck with the MJD CyanogenMod which I have few problams with and I am trying to boot again to hd2one CyanogenMod .
mikelt89 said:
I got stuck on the htc logo screen while trying to boot to a previous NAND version I had. I flashed it right away for the first time but now I jsut got stuck on the logo screen an than its reboots, again and again. any help as now I stuck with the MJD CyanogenMod which I have few problams with and I am trying to boot again to hd2one CyanogenMod .
Click to expand...
Click to collapse
Format the sd card. I would also suggest flashing back to a winmo rom and then starting over.
chpelle said:
Check your radio version - I had the same issue but after updating my radio everything was fine!
Click to expand...
Click to collapse
Rerereinstalled and no luck. Why me?
I have the same problem. I have checked the radio and everything to make sure it is fine but still getting stuck at htc screen??
Can someone help me please
Thanks
cwm recovery
flashed cwm recovery update for hd2 no my phone wont charge nor register when plugged into the computer. is there a way to fix this
Hello, I am in need of some help. My htc hd2 got stuck on the MAGDLR loader and everytime I try to load android it goes through all steps, tells me it completes, Phone restarts, and then goes back to the MAGDLR loader. If somebody could get me out that would be great
[email protected] said:
Hello, I am in need of some help. My htc hd2 got stuck on the MAGDLR loader and everytime I try to load android it goes through all steps, tells me it completes, Phone restarts, and then goes back to the MAGDLR loader. If somebody could get me out that would be great
Click to expand...
Click to collapse
It would help someone help you if you gave more info on the problem... like what exactly are you trying to load? Android from SD or nand? What build? What steps does it go through and complete?
first take the SD card out and back up your data i.e. sounds, photos, etc
1. go into bootloader (the screen with the red background, you can do this by holding the power on button down and the volume down button both together at the same time)
2. install task29 you can do this from the bootloader screen
3. reinstall magldr
4. reinstall a nand ROM
How to finish with that stcuking thing !
Hi,
I hope the following may help you :
The most important thing to notice is to flash a Radio ROM that supports 576RAM (don't ask me... :-D ).
The Good news are that the HTC Leo Radio 2.15.50.14 will.
So you can flash that radio right after running HSPL3.
MAGDL1.13 should work for as it did for me.
Good luck.
The post above mine seems to be the best route good luck.
I have a Vodafone HD2, and tried to run NAND Android on it many times, to no avail. I installed Hyperdroid GBX on MAGLDR, and made sure to follow the instructions carefully. It worked fine, and after a few days, when I tried powering on, it got stuck on the white Android logo. I took out the battery, booted into MAGLDR, recovered to a backup, but it still wouldn't boot, it was just stuck at the Android logo. So I did Task 27, flashed radio (Radio Leo 2.15.50.14), HSPL (2.08.HSPL), installed magldr 1.13, cwm 150MB partition, and the same rom (Hyperdroid GBX Magldr), and the same thing happened. It worked fine for a couple of days, then wouldn't boot. I tried the same process, with different roms. (Typhoon CM7, and Hyperdroid CM7) and the same thing keeps happening. I even tried installing CLK, but with CLK, I didn't even get the rom to boot the first time, it just sat there at the white Android logo.
This is getting to be very frustrating.
Please help me, if you can.
zyxw121 said:
I have a Vodafone HD2, and tried to run NAND Android on it many times, to no avail. I installed Hyperdroid GBX on MAGLDR, and made sure to follow the instructions carefully. It worked fine, and after a few days, when I tried powering on, it got stuck on the white Android logo. I took out the battery, booted into MAGLDR, recovered to a backup, but it still wouldn't boot, it was just stuck at the Android logo. So I did Task 27, flashed radio (Radio Leo 2.15.50.14), HSPL (2.08.HSPL), installed magldr 1.13, cwm 150MB partition, and the same rom (Hyperdroid GBX Magldr), and the same thing happened. It worked fine for a couple of days, then wouldn't boot. I tried the same process, with different roms. (Typhoon CM7, and Hyperdroid CM7) and the same thing keeps happening. I even tried installing CLK, but with CLK, I didn't even get the rom to boot the first time, it just sat there at the white Android logo.
This is getting to be very frustrating.
Please help me, if you can.
Click to expand...
Click to collapse
Hi,
Which version of MAGLDR are you using?
I'm using MAGLDR 1.13.
zyxw121 said:
I'm using MAGLDR 1.13.
Click to expand...
Click to collapse
Hi,
Sorry,which version of CWM?
I've been using 3.0.2.5, but I'll try with 3.0.2.4. I'll get back to you on it in a couple of days.
Thanks!
EDIT: The link you gave me downloads a 120MB partition size, but Typhoon CM7 requires a 150MB partition. Is it still going to work?
zyxw121 said:
I've been using 3.0.2.5, but I'll try with 3.0.2.4. I'll get back to you on it in a couple of days.
Thanks!
EDIT: The link you gave me downloads a 120MB partition size, but Typhoon CM7 requires a 150MB partition. Is it still going to work?
Click to expand...
Click to collapse
Hi,
Try KSUBEDI's TOOLKIT (Don't forget to thank him)
There is the ability to downgrade CWM
UPDATE
My phone froze, and then rebooted, however, it gut stuck at the white android logo. I waited for a few minutes, then took the battery out. I ran task 29, then LEOIMG. After that, I installed HSPL 2.08.HSPL, and tried to install MAGLDR 1.13. However, it was unsuccesful. It seemed to have flashed fine, with the progress bar going to 100, then rebooting, but after that, it got stuck at the white HTC screen. I tried taking out the battery, and holding down the power button while booting, but nothing works. I haven't yet got around to flashing CWM.
Do you think that perhaps cLK would work better?
Any help would be appreciated.
zyxw121 said:
UPDATE
My phone froze, and then rebooted, however, it gut stuck at the white android logo. I waited for a few minutes, then took the battery out. I ran task 29, then LEOIMG. After that, I installed HSPL 2.08.HSPL, and tried to install MAGLDR 1.13. However, it was unsuccesful. It seemed to have flashed fine, with the progress bar going to 100, then rebooting, but after that, it got stuck at the white HTC screen. I tried taking out the battery, and holding down the power button while booting, but nothing works. I haven't yet got around to flashing CWM.
Do you think that perhaps cLK would work better?
Any help would be appreciated.
Click to expand...
Click to collapse
Try to:
Install MAGLDR 1.13
Download CWR 4.0 and flash it in MAGLDR: http://www.multiupload.com/VZ1WB57AOY
Download this rom: http://www.multiupload.com/8UPNV5WUZU and install it in CWR.
Thanks, but I CAN'T install MAGLDR.
I flash it, and then my phone reboots and gets stuck at the white HTC screen.
ANOTHER UPDATE
I ran LEOIMG again, and this time tried to install cLK. It flashed fine, rebooted, and then got stuck at the white HTC screen, just as with MAGLDR.
I really am lost here. Does anyone have any ideas?
Thanks.
zyxw121 said:
ANOTHER UPDATE
I ran LEOIMG again, and this time tried to install cLK. It flashed fine, rebooted, and then got stuck at the white HTC screen, just as with MAGLDR.
I really am lost here. Does anyone have any ideas?
Thanks.
Click to expand...
Click to collapse
I would say do a task 29 and install wm6.5 first. then start the process from scratch.
Install this ROM this time.
http://forum.xda-developers.com/showthread.php?t=915159
This is a closest rom as wm 6. Let me know how it went if everything is fine then you can rule out that your phone is fine. also make sure
your anti-virus is turned off. Taking this simple steps will help you a lot in the future.
Good luck
PROBLEM SOLVED
It seems the problem is, I was forgetting to flash the radio . So I did that, and MAGLDR installed perfectly, as did CWM. I'm just installing the ROM (Hyperdroid GBX) now, but everything seems to be fine.
Thanks for all your help guys!
Glad you figure it out. Please press thanks
Sent from my Nexus One using XDA App
HI there so i bought a used HD2 wich came with ICS installed when it arrived i turned it on and loaded MAGLDR then it tried to load Android but got stuck at the GO GO GO! line. As i dont have any drivers installed and Windows doesnt recognize the HD2 in MAGLDR i cant flash a new rom. I wanted to do a Task 29 but that requires drivers too.
So my question is how do i perform a full wipe so i can get a working rom since the phone turns on, shows the TMobile splash screen then goes into Magldr and tries to boot android immediately then get sutck in GO GO GO!.
hold power button until magldr menu appear
in ad recovery you can wipe anything
Pentuni said:
HI there so i bought a used HD2 wich came with ICS installed when it arrived i turned it on and loaded MAGLDR then it tried to load Android but got stuck at the GO GO GO! line. As i dont have any drivers installed and Windows doesnt recognize the HD2 in MAGLDR i cant flash a new rom. I wanted to do a Task 29 but that requires drivers too.
So my question is how do i perform a full wipe so i can get a working rom since the phone turns on, shows the TMobile splash screen then goes into Magldr and tries to boot android immediately then get sutck in GO GO GO!.
Click to expand...
Click to collapse
good to know u want to start from scratch...u ll never know wats been put it that device... ....here is wat you can do
i had put out these steps in another thread to help out a fellow XDAian... try
files you need: (if you need pm me)
-task29
-Radio Leo 2.15.50.14
-DFT_LEO_MAGLDR113_DAF
-Recovery_150M_system_5M_cache
-rom zip (dont alter/extract zip if you done know wat to do with this)
do these: (from your current WP7 rom)
-restart device
-get into tricolor bootloader
-plug usb...hd2 should say 'USB'
-do a task 29
-get into bootloader again
-plug usb...hd2 should say 'USB'
-install radio by running 'CustomRUU.exe'
-get into tricolor bootloader
-plug usb...hd2 should say 'USB'
-run DAF.exe for installing MAGLDR
-reboot
-get into MAGLDR by holing power/end key while booting
-go to 'usb flasher' in the menu and press green/call button
-plug usb...hd2 should say 'USB'
-wait till it say 'wait usb...usb'
-get into your recovery folder
-run daf.exe
-reboot post completion
-get into MAGLDR by holing power/end key while booting
-get into ad-recovery
-get into mount storage
-activate usb mass storage
-now put the rom zip files into sd card
-press power to get back to recovery menu
-select install rom from sdcard
-choose rom file
-select install
this should typically install nandroid into your hd2...
if you face any issues, share the step and the error scenario/msg
I tried to get task29 but my PC doesn't recognize the hd2 even on bootloader.
Sent from my MB860 using xda premium
Edit: So i managed to get the drivers and got the phone recognized, so i performed task 29, worked perfectly. Followed the steps but when i try to install a radio it fails and gets stuck at 96%. I tried flashing the radio several times but no luck... What am i doing wrong?
It's better if you download the drivers because it's useful for later needs...
Best regards
Sam Razzy...
Sent from my HD2 using xda premium
Pentuni said:
Edit: So i managed to get the drivers and got the phone recognized, so i performed task 29, worked perfectly. Followed the steps but when i try to install a radio it fails and gets stuck at 96%. I tried flashing the radio several times but no luck... What am i doing wrong?
Click to expand...
Click to collapse
can u provide more details....actually as much details on the hd2 (eu/us), hspl, radio version, your process on how u tried etc...we will help you solve this.
gdsbalaji said:
can u provide more details....actually as much details on the hd2 (eu/us), hspl, radio version, your process on how u tried etc...we will help you solve this.
Click to expand...
Click to collapse
Their is a guide in my signature, its got basically everything you need to know. If you have problems post on there or pm me. I will gladly help.
Sent from my HD2 using xda premium
gdsbalaji said:
can u provide more details....actually as much details on the hd2 (eu/us), hspl, radio version, your process on how u tried etc...we will help you solve this.
Click to expand...
Click to collapse
I have the T Mobile US version, HSPL SPL-2.08.HSPL 8G XE COtullaHSPL 0x05 0x50(what it says on tricolor bootloader). The radio i tried to install is 2.15.50.14.
I got the drivers, my PC finally got a connection with the HD2 so i performed a task29 and wiped the phone then i followed your guide tried to install the radio but the process with CustomRUU.exe got stuck at 96% and said there was an error "this update utility can not be used on your device." and now the phone shows an Update Fail screen without a radio i cant install MAGLDr then install WP7 on it so what can i do?
kylew1212 said:
Their is a guide in my signature, its got basically everything you need to know. If you have problems post on there or pm me. I will gladly help.
Sent from my HD2 using xda premium
Click to expand...
Click to collapse
Thank you i read your guide. So can i instal clK without a radio? Also can i install ICS beta10 or Windows Phone 7 with cLK and witout going through the radio installation?
Another thing... the came with almost no battery and i cant charge the phone with the update failed screen i saw that i need at least 50% of battery but i dont think the phone has that much.
Pentuni said:
Thank you i read your guide. So can i instal clK without a radio? Also can i install ICS beta10 or Windows Phone 7 with cLK and witout going through the radio installation?
Another thing... the came with almost no battery and i cant charge the phone with the update failed screen i saw that i need at least 50% of battery but i dont think the phone has that much.
Click to expand...
Click to collapse
Okay sorry I should've explained more..
yes you have to have a radio.
Yes you can install ics beta 10 with clk.
No you cannot install wp7 with clk magldr is required for that.
If your phone is getting close to running out of battery I would flash clk 1.5 via SD card and then charge the phone up
Sent from my HD2 using xda premium
Ok so i got the radio installled and proceeded with the process with magldr installed fine and i followed this guide to get WP7.
http://forum.xda-developers.com/showthread.php?t=1246040
After the installation the phone syas reboot now! but doesnt do anything i had to pull out the battery and now it wont boot. ts stuck in a blank magldr menu.
EDIT: I managed to get magldr to show something, it tries to boot WPH but says 1eFATAL HIT 1. Did i scre up the installation? If i hold the power button it keeps doing the same thing without showing the options menu how do i wipe the rom so i can flash a new one?
Edit 2: flashed wp7 again boots magldr then sticks on GO GO GO! again.
I'm having the same problem until today.
Did a task29, installed magldr, cwm, then a rom, radio is 2.15.50.14.
It can boot to CWM, it can reinstall the rom but it's gets stuck in the go go go after restarting.
Please help
TIA
I know how to use magldr, but not tons about it.. also I think you guys should post in the wp forums someone there may be better help
Sent from my HD2 using xda premium
Pentuni said:
Ok so i got the radio installled and proceeded with the process with magldr installed fine and i followed this guide to get WP7.
http://forum.xda-developers.com/showthread.php?t=1246040
After the installation the phone syas reboot now! but doesnt do anything i had to pull out the battery and now it wont boot. ts stuck in a blank magldr menu.
EDIT: I managed to get magldr to show something, it tries to boot WPH but says 1eFATAL HIT 1. Did i scre up the installation? If i hold the power button it keeps doing the same thing without showing the options menu how do i wipe the rom so i can flash a new one?
Edit 2: flashed wp7 again boots magldr then sticks on GO GO GO! again.
Click to expand...
Click to collapse
Its happened to me before. Make sure as soon as you flash magldr, thats you clear mbr on sd card and use last 24 nand, and you will be fine, otherwise you will stay stuck on go go go go
good luck!
Yep.. thats a problem for you, but also for me, i have HTC HD2 fully working, just replaced digitzier soon, WinMo just works flawless thought it sucks ballls, and whenever i try to do task 29 then install radio then install magldr then install cwm with the required partition, i get stuck on GO GO GO! ..
Hello everyone,
I'm new here posting, but was reading XDA a lot .
I have a poblem that I cannot solve:
I have HTC HD2 and wanted to flash MIUI instead of stock OS.
I'm not new to custom ROM, and use custom ROMs on Motorola DEFY and Galaxy Ace.
For HD2 I used guide below:
http://forum.xda-developers.com/showthread.php?t=1402975
I was able to change SPL to 2.08 HSPL, but for some reason mine shows PB81110 HX-BC instead of PB81120 etc in top line and 0x40 instead of 0X50 in the bottom line.
Than I run Task 29 successfully. Than I've flashed cKL,1.4.0.1, it was 100% and looks good.
Than phone was supposed to boot to cKL menu and instead it stuck on HTC green letters logo on white screen.
I took battery out and tried press power button, no luck same HTC logo.
I went to three color screen, run Task 29 again and tried installing Magldr same thing says 100%, doesn't boot to Magldr screen, battery out, HTC logo and that's it. Tried multiple times, with different usb cables, nothing works. Didn't do stock back up, so cannot go back to stock, battery is getting low and I out of ideas.
Could someone PLEASE help, and explain what am I doing wrong? At this stage I'll be happy with any working ROM even stock.
Thank you so much in advance!!!
did you update teh radio? flash 2.15.50 from bootloader (stripey screen) and reboot, see if magldr appears.
Oh and stop task29ing, its not necessary.
PB81110 means it is a telstra version. (Same as regular version except for the 3g frequencies)
samsamuel said:
did you update teh radio? flash 2.15.50 from bootloader (stripey screen) and reboot, see if magldr appears.
Oh and stop task29ing, its not necessary.
PB81110 means it is a telstra version. (Same as regular version except for the 3g frequencies)
Click to expand...
Click to collapse
Thank you very much for prompt reply.
Hope it doesn't sound very annoying, but what is 2.15.50? I would appreciate just a reference or link to the right thread.
Edit: If this thread below is the correct , which one to pick?
http://forum.xda-developers.com/showthread.php?t=611787
the one that starts 2.15.50 would be the one. (the top one)
samsamuel said:
the one that starts 2.15.50 would be the one. (the top one)
Click to expand...
Click to collapse
@samsamuel: OK, that was a great help, thank you so much, after flashing 2.15.50 I've managed to install CWM via cLK. Much appreciated!
But problem again:
I've flashed tytung R14 kernel, than MIUI and it looks good, says congrats on the screen, but when I go to 'reboot system' in CWM it boots back to cLK screen looks like step 14 of this guide:
http://forum.xda-developers.com/showthread.php?t=1402975
I think I'm very close ( have CWM installed and able to flash kernel and MIUI), but obviously doing something wrong.
Is there any step I'm missing? Any ideas? Help please!
please use nand tookit
Sent from my HTC HD2 using xda premium
Hi!
My phone has the same problem. I think it has to do with corrupt internal memory blocks. I was able to flash a few times by altering system size partition, but now I can not flash clk on my phone anymore.
I ended up installing using magldr method, instead of clk. Use the hd2 toolkit to:
-Wipe task29
-Install magldr
-Magldr repartition (Usb flasher option in magldr)
-Install zip from sd card in ad recovery
I chose dataonext because I don't trust my nand memory.
Good luck!
Sent from my NexusHD2 using xda app-developers app