Hi,
i was just about to calibrate my battery after flashing a rom ( http://forum.xda-developers.com/showthread.php?t=827355&highlight=Battery ) To do this, the phone has to be charged while shut down... The Problem:
Everytime i shut done the phone it instantly reboots when connected to AC power... Is there any way to change that? I am using EU Leo with aMAGLDR 1.13.
Thanks, cmoe
MAGLDR doesn't support charging while off, you have two options:
1-Use cLK.
2-Use WinMo ROM.
thanks a lot !
Related
Hello people.
I have tried running CM7 nightlies NAND and Typhoon's CM7 NAND, and in both cases when I turn off the phone it turns on again after second, especially when plugged to charge up the battery it turns on sooner.
I have Magldr 1.13 and CWM and a can of coke.
Ihaveatattoo said:
Hello people.
I have tried running CM7 nightlies NAND and Typhoon's CM7 NAND, and in both cases when I turn off the phone it turns on again after second, especially when plugged to charge up the battery it turns on sooner.
I have Magldr 1.13 and CWM and a can of coke.
Click to expand...
Click to collapse
search is a wonderful tool
its a magdlr 1.13 issue that is a bettor solution then haveing to take your battery out repeatedly in the earlier magdlrs
Windows Phone 7 + MAGLDR V1.13
I boot up. HTC screen. Then MAGLDR V1.13 screen. Then another HTC screen (Windows Phone 7 HTC screen). It blocks there for quite some time. Then restarts. It's all it ever does. I can access MAGLDR V1.13 menu, no problem there. It was working fine yesterday =\
What can i do? Help :S
Reinstall the ROM and tell me what happens
Sent from my HTC HD2 using XDA Premium App
What Radio have you got on your phone?
I would re-install your ROM as walidhazem suggested, but make sure that you do a task 29 first, then flash either radio 2.12.50 or 2.15.50 as these seem to be the 2 best radios for WP7.
What SD card have you got as your issue could be related to that. Do you have another SD card you could try? You could also try using SDFormatter to re-format your SD card and then try.
Let us know how you get on.
Thank you for both replies!
If the phone is connected to a power source while in the magldr screen, it charges right?
Just making sure phone could be at 50% more power or not. It's been charging all night.
as far as i remember it doesn't charge.. but even if it's less than 50% i usually do the flash.. just b sure it's not very low..
exhit said:
Thank you for both replies!
If the phone is connected to a power source while in the magldr screen, it charges right?
Just making sure phone could be at 50% more power or not. It's been charging all night.
Click to expand...
Click to collapse
If you still have the magldr screen then boot in the rom. The reason it getting stuck is that the phone is too hot. Remove the battery for 1/2 hour then try again.
Do wait as the HTC screen is showing for a while until it loads the rom.
FPM
sudeep, how can i be sure it's not very low since i can't go the Home Screen.
FlowerPotmen, it's been charging all night, but i tried before that. It wasn't hot then. Also, i don't restart when it stops at the HTC screen. It restarts itself =\
Should i flash another rom? I'm afraid it can brick. If i'm to flash, I'll flash the WM6.5 Official.
exhit said:
sudeep, how can i be sure it's not very low since i can't go the Home Screen.
FlowerPotmen, it's been charging all night, but i tried before that. It wasn't hot then. Also, i don't restart when it stops at the HTC screen. It restarts itself =\
Should i flash another rom? I'm afraid it can brick. If i'm to flash, I'll flash the WM6.5 Official.
Click to expand...
Click to collapse
No need to flash wm6 just use task 29, then flash-in maglder 113 again, then flash your favourite rom again. But make sure to re-format you micro sd card first.
FPM
I can't instal Windows Mobile Center since "i don't have" a Windows Mobile device. I need the Active Sync feature needed for the RUU files. Without that i can't sync Task 29 or any new rom. What can i do?
Go to bootloader and install Roms like you used to do when using ActiveSync.
(Bootloader: Power off phone > Hold volume down button and boot > when you see a tri-colour screen connect the USB and wait until "Serial" to "USB" )
^^
That was the answer to your previous post. But to answer your original question :
Restarting in WP7 is a common, incompatible sd card, issue, try to use another sd-card and reinstall WP7 again.
Guys, i managed to Flash the official rom again. I'm gonna stick with Android SD for now.
Thanks for all the help and tips. I really appreciate the help.
exhit said:
Guys, i managed to Flash the official rom again. I'm gonna stick with Android SD for now.
Thanks for all the help and tips. I really appreciate the help.
Click to expand...
Click to collapse
how did you manage to flash it!!!
Hallo,
I want to flash the original Rom wmo 6.5.
So i thought that i have to make a HSPL downgreat from 2.08 to 1.44.
And after that nothing.
No chance to get into the Bootloader or start it normaly.
Befor this i tried to install Android [JDMS Ultimate Nand Rom] but everytime i become the ERROR 262 From the PDA Upgread Utility. It stans still it 0%.
2 times of 200 replays it works but than MAGDLR 1.13 give me the fatal error 1 message.
Now i thougt my htc hd2 is brick or not?
What can i do that it never happens again?
Hope you can Help me
tmous or regular hd2?
tmous - its probably dead from flashing any rom that uses spl 1.42, , is it a tmous? (green send key, red end key)
regular - need more info,,, what rom did you flash? exact filename please,
I Thought i have the regular HD 2.
First of all HSPL 2.08 was installed on my HD 2 after that i installed a new Radio Rom Leo_RADIO_2.15.50.14 after that i installed magdlr 1.13.
All works fine but it dont boot.
go go go .... only fatal error1.
JDMS v1.6.2 Ultimate [Kernel: Hastarin 8.6N] NAND ROM
But then everytime i use PDA Rom Upgrade utility i stuck by 0% and i get the error 262 but it sometimes happend that i got the 100%.
After JDMS install that never boot up, i installed a Stock Rom (Original Rom)
from HTC
RUU_Leo_S_HTC_GER_3.14.407.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
But after 20 % it stuck.
I test Task29 and it works.
Then i installed HSPL2_RUN and installed HSPL 1.42.
And now i cant boot, i cant startup bootloader, i cant connect to pc.
Its totaly dead.
Fr3shGy said:
I Thought i have the regular HD 2.
First of all HSPL 2.08 was installed on my HD 2 after that i installed a new Radio Rom Leo_RADIO_2.15.50.14 after that i installed magdlr 1.13.
All works fine but it dont boot.
go go go .... only fatal error1.
JDMS v1.6.2 Ultimate [Kernel: Hastarin 8.6N] NAND ROM
But then everytime i use PDA Rom Upgrade utility i stuck by 0% and i get the error 262 but it sometimes happend that i got the 100%.
After JDMS install that never boot up, i installed a Stock Rom (Original Rom)
from HTC
RUU_Leo_S_HTC_GER_3.14.407.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
But after 20 % it stuck.
I test Task29 and it works.
Then i installed HSPL2_RUN and installed HSPL 1.42.
And now i cant boot, i cant startup bootloader, i cant connect to pc.
Its totaly dead.
Click to expand...
Click to collapse
so you're saying it DOES NOT have a green send key and red end key?
No its the Regular HD2 from Germany
Fr3shGy said:
No its the Regular HD2 from Germany
Click to expand...
Click to collapse
flashing that SPL should not have bricked your phone afaik. Did you do any battery pulls? (ben pins maybe?)
Yes, i thought 100 times in 2 days ...because everytime i got the 262 Error with 0% i had to pull the battery.
I ve looked at the pins but they looks fine.
hmmm ...but i dont get any led signal while im loading the battery?
Could i kill the battery? At the beginning everytime i loading the battery i got a Orange Led signal that it loads.
Fr3shGy said:
Yes, i thought 100 times in 2 days ...because everytime i got the 262 Error with 0% i had to pull the battery.
I ve looked at the pins but they looks fine.
hmmm ...but i dont get any led signal while im loading the battery?
Could i kill the battery? At the beginning everytime i loading the battery i got a Orange Led signal that it loads.
Click to expand...
Click to collapse
look again and make 100% sure none of the pins are even a little bent, because they may just not be connecting to all 3 battery slots, then put in the battery and plug in the phone and see if it gives a yellow charge light.
Could simply be a flat battery,,,magldr doesn't allow charging when the phone is off.
If you have an old USB cable, mini or micro, cut the end off, bare the red and black, battery out, hold red to + black to - on the battery for a minute or two, see what happens when you plug back in.
samsamuel said:
Could simply be a flat battery,,,magldr doesn't allow charging when the phone is off.
If you have an old USB cable, mini or micro, cut the end off, bare the red and black, battery out, hold red to + black to - on the battery for a minute or two, see what happens when you plug back in.
Click to expand...
Click to collapse
looks like he's not running magldr, from what I read he flashed task29 then HSPL 1.42, so he actually doesn't have anything on NAND atm
orangekid said:
looks like he's not running magldr, from what I read he flashed task29 then HSPL 1.42, so he actually doesn't have anything on NAND atm
Click to expand...
Click to collapse
task29 only flashes the rom memory area, not teh spl/splash/radio areas. HSPL only affects the spl memory area, magldr exists in teh secondary splash screen area, so isn't touched by either of those. Magldr of course wont start since spl is no longer 2.08.x, but i suspect the non charge bug will still be in effect.
(Just for the record, and since there are so many posts recommending it, i personally believe in 99% of cases where task29 is run, there is no benefit at all. it just adds yet another write cycle to our already overstretched nand memory. flashing a new cwm partition will have the same effect.)
samsamuel said:
task29 only flashes the rom memory area, not teh spl/splash/radio areas. HSPL only affects the spl memory area, magldr exists in teh secondary splash screen area, so isn't touched by either of those. Magldr of course wont start since spl is no longer 2.08.x, but i suspect the non charge bug will still be in effect.
(Just for the record, and since there are so many posts recommending it, i personally believe in 99% of cases where task29 is run, there is no benefit at all. it just adds yet another write cycle to our already overstretched nand memory. flashing a new cwm partition will have the same effect.)
Click to expand...
Click to collapse
weird, last time I flashed task29 even with 2.08 I thought magldr didn't start and it didn't go past the splash, maybe I was wrong.
@ OP. have you tried to use a different battery?
Hello all together,
currently I'm having trouble with flashing ICS to a HD2. On that device there was a gingerbread version installed before.
The device is flashed with 2.08.HSPL and Radio 2.15.50.14. (These versions were already installed before).
I reflashed magldr 1.13 with Clockword mod 5.0.2.6. (After short trying CLK Loader). magldr is loading and I'm
selecting AD Recovery. Now I'm having the issue that the recovery is loading and rebooting direcly or rebooting
after showing the recovery screen for one second.
Absolutley weird is that if I plug out the usb cable the HD2 imediatly goes off and I'm not able to power it on again.
If I plug in the cable again the device is powering on automatically.
Could it be that the accumulator is empty (maybe it's weak and I tried several flashs). Will that produce my issues with the
recovery ?
Hope you could help me...
greetings Chris
cmueller85 said:
Hello all together,
currently I'm having trouble with flashing ICS to a HD2. On that device there was a gingerbread version installed before.
The device is flashed with 2.08.HSPL and Radio 2.15.50.14. (These versions were already installed before).
I reflashed magldr 1.13 with Clockword mod 5.0.2.6. (After short trying CLK Loader). magldr is loading and I'm
selecting AD Recovery. Now I'm having the issue that the recovery is loading and rebooting direcly or rebooting
after showing the recovery screen for one second.
Absolutley weird is that if I plug out the usb cable the HD2 imediatly goes off and I'm not able to power it on again.
If I plug in the cable again the device is powering on automatically.
Could it be that the accumulator is empty (maybe it's weak and I tried several flashs). Will that produce my issues with the
recovery ?
Hope you could help me...
greetings Chris
Click to expand...
Click to collapse
You're battery is probably flat, and you can't charge the phone when it's off in MAGLDR, so when you plug it in it powers on, but then when it can't charge it powers off again, as it doesn't have any power, causing a bootloop. Basically you'll have to cut open a Micro USB cable and charge the phone manually, or if you have a spare HD2/a friend's HD2 running cLK or WinMo charge it in their phone. Then follow the guides as normal to flash Android.
or it could be a bent battery pin...?
Guys,
A few days back i flashed this rom "Lang HD2 Pdaimatejam Rom Wp7.8 OS 7.10.8858.136 RMT v8.7 >FULLY UNLOCKED> " on my hd2. After this my phone keeps on rebooting. I have tried flashing back windows 6.5 and it reboots on windows 6.5. I tried flashing recovery but as soon as i select ad recovery it reboots. i have too boot it up with usb cable. If i remove my usb cable it stopd booting. I checked my battery which is like new since i bought it a few days ago with a LED bulb and it works perfectly fine so i dont thinks its the battery drained or charging issue.
I have also tried restoring the HSPL to 2.08 and hacking it again but it just won boot. Please help me
thank you
no need to post same post in different topics... this is called as SPAM..