Related
I have a Vodafone HD2, and tried to run NAND Android on it many times, to no avail. I installed Hyperdroid GBX on MAGLDR, and made sure to follow the instructions carefully. It worked fine, and after a few days, when I tried powering on, it got stuck on the white Android logo. I took out the battery, booted into MAGLDR, recovered to a backup, but it still wouldn't boot, it was just stuck at the Android logo. So I did Task 27, flashed radio (Radio Leo 2.15.50.14), HSPL (2.08.HSPL), installed magldr 1.13, cwm 150MB partition, and the same rom (Hyperdroid GBX Magldr), and the same thing happened. It worked fine for a couple of days, then wouldn't boot. I tried the same process, with different roms. (Typhoon CM7, and Hyperdroid CM7) and the same thing keeps happening. I even tried installing CLK, but with CLK, I didn't even get the rom to boot the first time, it just sat there at the white Android logo.
This is getting to be very frustrating.
Please help me, if you can.
zyxw121 said:
I have a Vodafone HD2, and tried to run NAND Android on it many times, to no avail. I installed Hyperdroid GBX on MAGLDR, and made sure to follow the instructions carefully. It worked fine, and after a few days, when I tried powering on, it got stuck on the white Android logo. I took out the battery, booted into MAGLDR, recovered to a backup, but it still wouldn't boot, it was just stuck at the Android logo. So I did Task 27, flashed radio (Radio Leo 2.15.50.14), HSPL (2.08.HSPL), installed magldr 1.13, cwm 150MB partition, and the same rom (Hyperdroid GBX Magldr), and the same thing happened. It worked fine for a couple of days, then wouldn't boot. I tried the same process, with different roms. (Typhoon CM7, and Hyperdroid CM7) and the same thing keeps happening. I even tried installing CLK, but with CLK, I didn't even get the rom to boot the first time, it just sat there at the white Android logo.
This is getting to be very frustrating.
Please help me, if you can.
Click to expand...
Click to collapse
Hi,
Which version of MAGLDR are you using?
I'm using MAGLDR 1.13.
zyxw121 said:
I'm using MAGLDR 1.13.
Click to expand...
Click to collapse
Hi,
Sorry,which version of CWM?
I've been using 3.0.2.5, but I'll try with 3.0.2.4. I'll get back to you on it in a couple of days.
Thanks!
EDIT: The link you gave me downloads a 120MB partition size, but Typhoon CM7 requires a 150MB partition. Is it still going to work?
zyxw121 said:
I've been using 3.0.2.5, but I'll try with 3.0.2.4. I'll get back to you on it in a couple of days.
Thanks!
EDIT: The link you gave me downloads a 120MB partition size, but Typhoon CM7 requires a 150MB partition. Is it still going to work?
Click to expand...
Click to collapse
Hi,
Try KSUBEDI's TOOLKIT (Don't forget to thank him)
There is the ability to downgrade CWM
UPDATE
My phone froze, and then rebooted, however, it gut stuck at the white android logo. I waited for a few minutes, then took the battery out. I ran task 29, then LEOIMG. After that, I installed HSPL 2.08.HSPL, and tried to install MAGLDR 1.13. However, it was unsuccesful. It seemed to have flashed fine, with the progress bar going to 100, then rebooting, but after that, it got stuck at the white HTC screen. I tried taking out the battery, and holding down the power button while booting, but nothing works. I haven't yet got around to flashing CWM.
Do you think that perhaps cLK would work better?
Any help would be appreciated.
zyxw121 said:
UPDATE
My phone froze, and then rebooted, however, it gut stuck at the white android logo. I waited for a few minutes, then took the battery out. I ran task 29, then LEOIMG. After that, I installed HSPL 2.08.HSPL, and tried to install MAGLDR 1.13. However, it was unsuccesful. It seemed to have flashed fine, with the progress bar going to 100, then rebooting, but after that, it got stuck at the white HTC screen. I tried taking out the battery, and holding down the power button while booting, but nothing works. I haven't yet got around to flashing CWM.
Do you think that perhaps cLK would work better?
Any help would be appreciated.
Click to expand...
Click to collapse
Try to:
Install MAGLDR 1.13
Download CWR 4.0 and flash it in MAGLDR: http://www.multiupload.com/VZ1WB57AOY
Download this rom: http://www.multiupload.com/8UPNV5WUZU and install it in CWR.
Thanks, but I CAN'T install MAGLDR.
I flash it, and then my phone reboots and gets stuck at the white HTC screen.
ANOTHER UPDATE
I ran LEOIMG again, and this time tried to install cLK. It flashed fine, rebooted, and then got stuck at the white HTC screen, just as with MAGLDR.
I really am lost here. Does anyone have any ideas?
Thanks.
zyxw121 said:
ANOTHER UPDATE
I ran LEOIMG again, and this time tried to install cLK. It flashed fine, rebooted, and then got stuck at the white HTC screen, just as with MAGLDR.
I really am lost here. Does anyone have any ideas?
Thanks.
Click to expand...
Click to collapse
I would say do a task 29 and install wm6.5 first. then start the process from scratch.
Install this ROM this time.
http://forum.xda-developers.com/showthread.php?t=915159
This is a closest rom as wm 6. Let me know how it went if everything is fine then you can rule out that your phone is fine. also make sure
your anti-virus is turned off. Taking this simple steps will help you a lot in the future.
Good luck
PROBLEM SOLVED
It seems the problem is, I was forgetting to flash the radio . So I did that, and MAGLDR installed perfectly, as did CWM. I'm just installing the ROM (Hyperdroid GBX) now, but everything seems to be fine.
Thanks for all your help guys!
Glad you figure it out. Please press thanks
Sent from my Nexus One using XDA App
Hallo,
I want to flash the original Rom wmo 6.5.
So i thought that i have to make a HSPL downgreat from 2.08 to 1.44.
And after that nothing.
No chance to get into the Bootloader or start it normaly.
Befor this i tried to install Android [JDMS Ultimate Nand Rom] but everytime i become the ERROR 262 From the PDA Upgread Utility. It stans still it 0%.
2 times of 200 replays it works but than MAGDLR 1.13 give me the fatal error 1 message.
Now i thougt my htc hd2 is brick or not?
What can i do that it never happens again?
Hope you can Help me
tmous or regular hd2?
tmous - its probably dead from flashing any rom that uses spl 1.42, , is it a tmous? (green send key, red end key)
regular - need more info,,, what rom did you flash? exact filename please,
I Thought i have the regular HD 2.
First of all HSPL 2.08 was installed on my HD 2 after that i installed a new Radio Rom Leo_RADIO_2.15.50.14 after that i installed magdlr 1.13.
All works fine but it dont boot.
go go go .... only fatal error1.
JDMS v1.6.2 Ultimate [Kernel: Hastarin 8.6N] NAND ROM
But then everytime i use PDA Rom Upgrade utility i stuck by 0% and i get the error 262 but it sometimes happend that i got the 100%.
After JDMS install that never boot up, i installed a Stock Rom (Original Rom)
from HTC
RUU_Leo_S_HTC_GER_3.14.407.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
But after 20 % it stuck.
I test Task29 and it works.
Then i installed HSPL2_RUN and installed HSPL 1.42.
And now i cant boot, i cant startup bootloader, i cant connect to pc.
Its totaly dead.
Fr3shGy said:
I Thought i have the regular HD 2.
First of all HSPL 2.08 was installed on my HD 2 after that i installed a new Radio Rom Leo_RADIO_2.15.50.14 after that i installed magdlr 1.13.
All works fine but it dont boot.
go go go .... only fatal error1.
JDMS v1.6.2 Ultimate [Kernel: Hastarin 8.6N] NAND ROM
But then everytime i use PDA Rom Upgrade utility i stuck by 0% and i get the error 262 but it sometimes happend that i got the 100%.
After JDMS install that never boot up, i installed a Stock Rom (Original Rom)
from HTC
RUU_Leo_S_HTC_GER_3.14.407.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
But after 20 % it stuck.
I test Task29 and it works.
Then i installed HSPL2_RUN and installed HSPL 1.42.
And now i cant boot, i cant startup bootloader, i cant connect to pc.
Its totaly dead.
Click to expand...
Click to collapse
so you're saying it DOES NOT have a green send key and red end key?
No its the Regular HD2 from Germany
Fr3shGy said:
No its the Regular HD2 from Germany
Click to expand...
Click to collapse
flashing that SPL should not have bricked your phone afaik. Did you do any battery pulls? (ben pins maybe?)
Yes, i thought 100 times in 2 days ...because everytime i got the 262 Error with 0% i had to pull the battery.
I ve looked at the pins but they looks fine.
hmmm ...but i dont get any led signal while im loading the battery?
Could i kill the battery? At the beginning everytime i loading the battery i got a Orange Led signal that it loads.
Fr3shGy said:
Yes, i thought 100 times in 2 days ...because everytime i got the 262 Error with 0% i had to pull the battery.
I ve looked at the pins but they looks fine.
hmmm ...but i dont get any led signal while im loading the battery?
Could i kill the battery? At the beginning everytime i loading the battery i got a Orange Led signal that it loads.
Click to expand...
Click to collapse
look again and make 100% sure none of the pins are even a little bent, because they may just not be connecting to all 3 battery slots, then put in the battery and plug in the phone and see if it gives a yellow charge light.
Could simply be a flat battery,,,magldr doesn't allow charging when the phone is off.
If you have an old USB cable, mini or micro, cut the end off, bare the red and black, battery out, hold red to + black to - on the battery for a minute or two, see what happens when you plug back in.
samsamuel said:
Could simply be a flat battery,,,magldr doesn't allow charging when the phone is off.
If you have an old USB cable, mini or micro, cut the end off, bare the red and black, battery out, hold red to + black to - on the battery for a minute or two, see what happens when you plug back in.
Click to expand...
Click to collapse
looks like he's not running magldr, from what I read he flashed task29 then HSPL 1.42, so he actually doesn't have anything on NAND atm
orangekid said:
looks like he's not running magldr, from what I read he flashed task29 then HSPL 1.42, so he actually doesn't have anything on NAND atm
Click to expand...
Click to collapse
task29 only flashes the rom memory area, not teh spl/splash/radio areas. HSPL only affects the spl memory area, magldr exists in teh secondary splash screen area, so isn't touched by either of those. Magldr of course wont start since spl is no longer 2.08.x, but i suspect the non charge bug will still be in effect.
(Just for the record, and since there are so many posts recommending it, i personally believe in 99% of cases where task29 is run, there is no benefit at all. it just adds yet another write cycle to our already overstretched nand memory. flashing a new cwm partition will have the same effect.)
samsamuel said:
task29 only flashes the rom memory area, not teh spl/splash/radio areas. HSPL only affects the spl memory area, magldr exists in teh secondary splash screen area, so isn't touched by either of those. Magldr of course wont start since spl is no longer 2.08.x, but i suspect the non charge bug will still be in effect.
(Just for the record, and since there are so many posts recommending it, i personally believe in 99% of cases where task29 is run, there is no benefit at all. it just adds yet another write cycle to our already overstretched nand memory. flashing a new cwm partition will have the same effect.)
Click to expand...
Click to collapse
weird, last time I flashed task29 even with 2.08 I thought magldr didn't start and it didn't go past the splash, maybe I was wrong.
@ OP. have you tried to use a different battery?
Hi,
i was just about to calibrate my battery after flashing a rom ( http://forum.xda-developers.com/showthread.php?t=827355&highlight=Battery ) To do this, the phone has to be charged while shut down... The Problem:
Everytime i shut done the phone it instantly reboots when connected to AC power... Is there any way to change that? I am using EU Leo with aMAGLDR 1.13.
Thanks, cmoe
MAGLDR doesn't support charging while off, you have two options:
1-Use cLK.
2-Use WinMo ROM.
thanks a lot !
Please i know that i am a noob but i need help really
OK so when i turn off my HD2 and put it in charger it only boots up to android and doesn't charge as usual with cLK.
Any suggestions???
do a clean install starting by Task29...
silly question, but there are some really silly people about,,, are you SURE its cLK and not magldr? not confusing cLK and cwm are you? (you wouldn't be the first)
no sir i am not stupid i know what is clk and i installed the stable 1.5 version but i can't charge
also i did task 29 maybe 5 times
Check the battery pins!
shanman-2 said:
Check the battery pins!
Click to expand...
Click to collapse
I cheked them and it is not a solution. No matter what i did it won't charge when it is off
Can you enter clk by holding back button while powering on?
Sent from the pub...
shanman-2 said:
Can you enter clk by holding back button while powering on?
Sent from the pub...
Click to expand...
Click to collapse
Yes i can and also repartion nand from it directly but it won't charge it just boots up
midoBB said:
Yes i can and also repartion nand from it directly but it won't charge it just boots up
Click to expand...
Click to collapse
Try changing usb cable, is it a genuine htc cable?
I had problems with spurious cables before!!
I take it it charges when booted?
Yes it charges when booted and no it is not an official htc cable but it used to charge it before ( i had cLK and then i flashed WP7 and when i reverted to cLK it can't charge when off)
midoBB said:
Yes it charges when booted and no it is not an official htc cable but it used to charge it before ( i had cLK and then i flashed WP7 and when i reverted to cLK it can't charge when off)
Click to expand...
Click to collapse
Are you using a different sdcard?
if not try a different sdcard as wp7 messes around with the sdcard which can also cause strange issues!!
Otherwise get a htc cable, 5 euro on e-bay.
What is the recovery that you use, what version?
Swyped from my HTC HD2 using XDA Premium
cwm 5.0.2.7
Edit: not paying attention...tis not me you were asking. lol
With clk 1.5 rc1 it is either 5.0.2.6 or 7 not really sure, anyway the OP seems to be gone walkabout.
Sent from my HTC HD2 using xda premium
Hello all together,
currently I'm having trouble with flashing ICS to a HD2. On that device there was a gingerbread version installed before.
The device is flashed with 2.08.HSPL and Radio 2.15.50.14. (These versions were already installed before).
I reflashed magldr 1.13 with Clockword mod 5.0.2.6. (After short trying CLK Loader). magldr is loading and I'm
selecting AD Recovery. Now I'm having the issue that the recovery is loading and rebooting direcly or rebooting
after showing the recovery screen for one second.
Absolutley weird is that if I plug out the usb cable the HD2 imediatly goes off and I'm not able to power it on again.
If I plug in the cable again the device is powering on automatically.
Could it be that the accumulator is empty (maybe it's weak and I tried several flashs). Will that produce my issues with the
recovery ?
Hope you could help me...
greetings Chris
cmueller85 said:
Hello all together,
currently I'm having trouble with flashing ICS to a HD2. On that device there was a gingerbread version installed before.
The device is flashed with 2.08.HSPL and Radio 2.15.50.14. (These versions were already installed before).
I reflashed magldr 1.13 with Clockword mod 5.0.2.6. (After short trying CLK Loader). magldr is loading and I'm
selecting AD Recovery. Now I'm having the issue that the recovery is loading and rebooting direcly or rebooting
after showing the recovery screen for one second.
Absolutley weird is that if I plug out the usb cable the HD2 imediatly goes off and I'm not able to power it on again.
If I plug in the cable again the device is powering on automatically.
Could it be that the accumulator is empty (maybe it's weak and I tried several flashs). Will that produce my issues with the
recovery ?
Hope you could help me...
greetings Chris
Click to expand...
Click to collapse
You're battery is probably flat, and you can't charge the phone when it's off in MAGLDR, so when you plug it in it powers on, but then when it can't charge it powers off again, as it doesn't have any power, causing a bootloop. Basically you'll have to cut open a Micro USB cable and charge the phone manually, or if you have a spare HD2/a friend's HD2 running cLK or WinMo charge it in their phone. Then follow the guides as normal to flash Android.
or it could be a bent battery pin...?