Related
I have WP7 working really well using magldr 1.12. Does anyone know if I can flash magldr 1.13 without having to reflash WP7.
Is it the same as flashing a new radio? Just enter bootloader and flash?
Yup, I've done this too, and it doesn't affect my WP7.
bleui said:
Yup, I've done this too, and it doesn't affect my WP7.
Click to expand...
Click to collapse
Yes you are fine to flash new magldr aslong as you havent enabled the "Use last 24mb of nand" option.
I upgraded my magldr yesterday:
As normal, hold volume down and power button it on bootloader, plug in usb, and flash it as normal, nothing in wp7 will get effected ( :
yep, hold vol down button, and power button then from there just flash 1.13 like you did with 1.12
bleui said:
Yup, I've done this too, and it doesn't affect my WP7.
Click to expand...
Click to collapse
Have you seen any change since in anyway since upgrading to 1.13?
hinds said:
Have you seen any change since in anyway since upgrading to 1.13?
Click to expand...
Click to collapse
aside from a slightly faster boot up, I haven't notice a thing so far, either that or I'm not playing more with my HD2
I can't upgrade magldr 1.12 to 1.13, the phone stays in 0%.
I have my hd2 with magldr 1.12 an wp7 and i'd like to flash a nand android.
i dont get the auto reboot issue when the USB cable is plugged in with 1.13
lordcoloso said:
I can't upgrade magldr 1.12 to 1.13, the phone stays in 0%.
I have my hd2 with magldr 1.12 an wp7 and i'd like to flash a nand android.
Click to expand...
Click to collapse
have you tried doing Task29
dazza9075 said:
i dont get the auto reboot issue when the USB cable is plugged in with 1.13
Click to expand...
Click to collapse
me neither, maybe it's only when you plug the cable while its off
bleui said:
have you tried doing Task29
me neither, maybe it's only when you plug the cable while its off
Click to expand...
Click to collapse
doing a task29 would remove it, therefore having to reinstall windows 7 again
on his phone.
are all the drivers installed? do you have your phone in tri color mode?
Windows Phone 7 + MAGLDR V1.13
I boot up. HTC screen. Then MAGLDR V1.13 screen. Then another HTC screen (Windows Phone 7 HTC screen). It blocks there for quite some time. Then restarts. It's all it ever does. I can access MAGLDR V1.13 menu, no problem there. It was working fine yesterday =\
What can i do? Help :S
Reinstall the ROM and tell me what happens
Sent from my HTC HD2 using XDA Premium App
What Radio have you got on your phone?
I would re-install your ROM as walidhazem suggested, but make sure that you do a task 29 first, then flash either radio 2.12.50 or 2.15.50 as these seem to be the 2 best radios for WP7.
What SD card have you got as your issue could be related to that. Do you have another SD card you could try? You could also try using SDFormatter to re-format your SD card and then try.
Let us know how you get on.
Thank you for both replies!
If the phone is connected to a power source while in the magldr screen, it charges right?
Just making sure phone could be at 50% more power or not. It's been charging all night.
as far as i remember it doesn't charge.. but even if it's less than 50% i usually do the flash.. just b sure it's not very low..
exhit said:
Thank you for both replies!
If the phone is connected to a power source while in the magldr screen, it charges right?
Just making sure phone could be at 50% more power or not. It's been charging all night.
Click to expand...
Click to collapse
If you still have the magldr screen then boot in the rom. The reason it getting stuck is that the phone is too hot. Remove the battery for 1/2 hour then try again.
Do wait as the HTC screen is showing for a while until it loads the rom.
FPM
sudeep, how can i be sure it's not very low since i can't go the Home Screen.
FlowerPotmen, it's been charging all night, but i tried before that. It wasn't hot then. Also, i don't restart when it stops at the HTC screen. It restarts itself =\
Should i flash another rom? I'm afraid it can brick. If i'm to flash, I'll flash the WM6.5 Official.
exhit said:
sudeep, how can i be sure it's not very low since i can't go the Home Screen.
FlowerPotmen, it's been charging all night, but i tried before that. It wasn't hot then. Also, i don't restart when it stops at the HTC screen. It restarts itself =\
Should i flash another rom? I'm afraid it can brick. If i'm to flash, I'll flash the WM6.5 Official.
Click to expand...
Click to collapse
No need to flash wm6 just use task 29, then flash-in maglder 113 again, then flash your favourite rom again. But make sure to re-format you micro sd card first.
FPM
I can't instal Windows Mobile Center since "i don't have" a Windows Mobile device. I need the Active Sync feature needed for the RUU files. Without that i can't sync Task 29 or any new rom. What can i do?
Go to bootloader and install Roms like you used to do when using ActiveSync.
(Bootloader: Power off phone > Hold volume down button and boot > when you see a tri-colour screen connect the USB and wait until "Serial" to "USB" )
^^
That was the answer to your previous post. But to answer your original question :
Restarting in WP7 is a common, incompatible sd card, issue, try to use another sd-card and reinstall WP7 again.
Guys, i managed to Flash the official rom again. I'm gonna stick with Android SD for now.
Thanks for all the help and tips. I really appreciate the help.
exhit said:
Guys, i managed to Flash the official rom again. I'm gonna stick with Android SD for now.
Thanks for all the help and tips. I really appreciate the help.
Click to expand...
Click to collapse
how did you manage to flash it!!!
I just got a HD2 from a guy on craigslist for $10.00. He said he thinks he bricked it trying to put Android on instead of Windows. Hasn't been used in over 2 months and I have the battery charging I hope. The light is not on showing that it is charging.
IF I can get a charge to the battery would anyone have any pointers on how to get this thing working again? Please let me know. Have a great day. And thanks in advance!
mahgninnuc93 said:
I just got a HD2 from a guy on craigslist for $10.00. He said he thinks he bricked it trying to put Android on instead of Windows. Hasn't been used in over 2 months and I have the battery charging I hope. The light is not on showing that it is charging.
IF I can get a charge to the battery would anyone have any pointers on how to get this thing working again? Please let me know. Have a great day. And thanks in advance!
Click to expand...
Click to collapse
when you are able to charge the battery...
press the volume button down (keep it pressed) and turn on the phone
if you see a reg blue green color screen....report back here !!
mahgninnuc93 said:
I just got a HD2 from a guy on craigslist for $10.00. He said he thinks he bricked it trying to put Android on instead of Windows. Hasn't been used in over 2 months and I have the battery charging I hope. The light is not on showing that it is charging.
IF I can get a charge to the battery would anyone have any pointers on how to get this thing working again? Please let me know. Have a great day. And thanks in advance!
Click to expand...
Click to collapse
Well if the guy truly bricked it there is only two fixes for it. It will have to have either a new main board installed or have the SPL resurrected with a JTAG. No other options there.
If it is not brick which it is a good chance it is not cause as far as I know flashing Android to NAND on the HD2 can not brick the HD2 cause you are running a secondary custom bootloader for the Android while the original SPL bootloader is completely unchanged and operational. The only thing that can truly brick a HD2 is if it some how it came unplugged while flashing MAGLDR or cLK before installing the actual Android ROM. Or if it is a TMOUS HD2 it can be bricked by flashing a non compatible radio version to it, but that is uncommon as you have to have a 3.14 radio version for MAGLDR to even function and the same radio is recommended for cLK also.
Also just to let you know if it has MAGLDR flashed to it for the Android bootloader, the HD2 will not charge while it is off. This is the one major downfall in my opinion of MAGLDR.
T-Macgnolia said:
Well if the guy truly bricked it there is only two fixes for it. It will have to have either a new main board installed or have the SPL resurrected with a JTAG. No other options there.
If it is not brick which it is a good chance it is not cause as far as I know flashing Android to NAND on the HD2 can not brick the HD2 cause you are running a secondary custom bootloader for the Android while the original SPL bootloader is completely unchanged and operational. The only thing that can truly brick a HD2 is if it some how it came unplugged while flashing MAGLDR or cLK before installing the actual Android ROM. Or if it is a TMOUS HD2 it can be bricked by flashing a non compatible radio version to it, but that is uncommon as you have to have a 3.14 radio version for MAGLDR to even function and the same radio is recommended for cLK also.
Also just to let you know if it has MAGLDR flashed to it for the Android bootloader, the HD2 will not charge while it is off. This is the one major downfall in my opinion of MAGLDR.
Click to expand...
Click to collapse
Interesting. This will not charge at all. Was thinking of buying a battery on Amazon, but if it wont charge then maybe I should get a charging dock, put the battery in there and let it charge and then see what I get. Dang, wish I had a battery for this on hand LOL. Gonna have to wait a day to get something to work with. I will keep you in the loop!
If it is the latter and I can get the battery charged with an external charger is there any way to save the phone?
mahgninnuc93 said:
Interesting. This will not charge at all. Was thinking of buying a battery on Amazon, but if it wont charge then maybe I should get a charging dock, put the battery in there and let it charge and then see what I get. Dang, wish I had a battery for this on hand LOL. Gonna have to wait a day to get something to work with. I will keep you in the loop!
If it is the latter and I can get the battery charged with an external charger is there any way to save the phone?
Click to expand...
Click to collapse
I seem to recall (I don't use Android on my HD2) that Android only charges if the phone is turned on. So an external charger may help.
If it has magldr 1.13 flashed it should turn on as soon as you plug it in.
Otherwise it may be as stated above.
I finally found an external battery charger and have plugged it in.
Should I let the batterycharge fully before I attempt to do anything?
Hell I don't even know if the battery is any goodsince it sat for 2 months.
Thoughts?
Well, I got the battery fully charged. At least according to the wall charger. Put it in and nothing. I"m gonna go to a store tomorrow and try a new battery. If that doesn't work any other suggestions?
And I have no idea which ROM the guy tried to put on.
I think the phone is dead.... you might be putting money into a hopeless cause.
Sent from my HD2 using XDA Premium App
Any vibration when you try to turn it on?
HTC HD2 Miui 1.7.8
[email protected]
Nope it does absolutely nothing. I did try the battery charger again.
When I put Tue battery on it showed no charge. I'm leaning towards the battery being toast. So ill go see if the local repair shop has a good charged battery. Might call HTC tech support and see if I can get them to hook me up lol.
So got a fresh battery and nothing.
Looks like I may have to jtag to save it. Anyone know how to jyag or have any links? I also read that putting it in the freezer could save it. Anyone ever heard of this and us there any validity?
Sent from my LG-P999 using XDA App
WOW...I had it in the freezer since this afternoon. Took it out plugged it in and got the welcome screen then a screen with red, green and some writing on it.
Once I get to that screen what do I need to do next. I"m totally new to the HD2 scene. For the moment I don't care if it has Android or Windows (the original OS).
I just want to get it to working again. If there a firmware I can download to put on?
When IO booted it up I held the volume button down and the power button.
mahgninnuc93 said:
WOW...I had it in the freezer since this afternoon. Took it out plugged it in and got the welcome screen then a screen with red, green and some writing on it.
Once I get to that screen what do I need to do next. I"m totally new to the HD2 scene. For the moment I don't care if it has Android or Windows (the original OS).
I just want to get it to working again. If there a firmware I can download to put on?
When IO booted it up I held the volume button down and the power button.
Click to expand...
Click to collapse
Ok first off if you do have to JTAG your HD2 in the end, just PM me and I will point you in the right direction to get that done.
Now seeing that you can get to the bootloader you need to download the HD2 NAND Toolkit v4.1. This toolkit by recognized developer ksubedi is a all in one NAND flashing toolkit for the HTC HD2. It makes flashing anything very simple just make sure to read ksubedi's instructions on how to use the toolkit in post #2 and the FAQ in post #3. You can literally flash anything to NAND with this toolkit. You can flash Windows Mobile ROMs custom and stock, you can flash MAGLDR and cLK, it can flash Clockwork Mod Recovery for MAGLDR and cLK, you can flash different splash screens, you can flash HSPL, you can run a Task 29, and it can repartition your NAND also.
Now you can download and try to flash what ever you want with this toolkit you just have to put your HD2 into bootloader and connect the HD2 to your computer and wait for the serial in the white bar of bootloader to change to USB. This means you have the HTC USB Sync you need to flash via bootloader and USB.
You can also flash via SD card be it Windows Mobile, MAGLDR, or cLK. Just check this thread to learn how to do this with Windows Mobile ROMs. Check out this thread to learn how to flash MAGLDR and cLK via SD card.
Remember if you go the Android route then you need to flash Clockwork Mod Recovery to flash Android ROMs via SD card and not just the the DAF for option #4 USB Flasher in MAGLDR.
Hope this helps some.
OK. So I finally got it on Tue "stick together " screen. I was also able to hold up and down volume and hit powerm it said it restored to factotum but is now in the stick together screen and nothing else has happened.
This time I also got the yellow charge light on while connected to USB. Its coming around but still now fully alive. How long should it stick on the stick together screen.
And windows can't find the drivers to actually read it's connected.
Thanks for all the help.
Sent from my LG-P999 using XDA App
mahgninnuc93 said:
OK. So I finally got it on Tue "stick together " screen. I was also able to hold up and down volume and hit powerm it said it restored to factotum but is now in the stick together screen and nothing else has happened.
This time I also got the yellow charge light on while connected to USB. Its coming around but still now fully alive. How long should it stick on the stick together screen.
And windows can't find the drivers to actually read it's connected.
Thanks for all the help.
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
The "Stick Together" screen is the default splash screen for the T-MOUS HD2 (T-Mobile US HD2). The factory reset you tried did not work because you did not have a Windows Mobile ROM on the HD2. All the reset did was maybe restore the custom bootloader on the HD2 be it MAGLDR or cLK. But if it was MAGLDR it should altleast show the MAGLDR main menu. That is unless the HD2 does not have a 3.14.51.12 radio flashed to in in which case MAGLDR would not load.
What does iot sasy on the HD2 screen while you are in the bootloader? This will tell you if you have the proper HSPL flashed to use MAGLDR or if HSPL is on the HD2.
You will have to have HSPL to go Andriod or to flash a custom Windows Mobile ROM.
Sorry for the double post but I see you are online now so I figure it is better to make another post than to edit my last one.
Any you mentioned drivers, try downloading and installing Windows Mobile Device Center. This should give you the drivers for the HTC USB connection.
I can't tell if I'm in turn bootloader screen or not. What does it look like? Weird thing is....it wont turn in or off unless I put it in Tue damn freezer first for a spell LOL. What the heck would cause that
Sent from my LG-P999 using XDA App
OK I have it on the multi colored screen and it says USB. Now what?
It says:
PB81120 HX-B3
SPL-2.08.HSPL 8G XE
RIFFBOX 0x05
RESURRECTED! 0x50
What do I do next
Sent from my LG-P999 using XDA App
This us where I am stuck and the message I am getting is "USB device not recognized" on both of my computers. Suggestions? At least I know its not totally shot.
Sent from my LG-P999 using XDA App
After flashing HSPL 2.08, i installed magldr on my device. But when i install an Android or Clockworkmod Recovery, the installer repartitions the device. But after this step there stand "reboot" but it wont reboot. I must then pull off the battery and restart the phone. But ten the phone is stuck in Magldr or in Clk.
Plss heeelp me!
Thank youu
XxxXxx896 said:
After flashing HSPL 2.08, i installed magldr on my device. But when i install an Android or Clockworkmod Recovery, the installer repartitions the device. But after this step there stand "reboot" but it wont reboot. I must then pull off the battery and restart the phone. But ten the phone is stuck in Magldr or in Clk.
Plss heeelp me!
Thank youu
Click to expand...
Click to collapse
Well first clockwork mod recovery must be installed to install android in both clk and magldr ..
Sent from my Transformer TF101 using xda premium
kylew1212 said:
Well first clockwork mod recovery must be installed to install android in both clk and magldr ..
Sent from my Transformer TF101 using xda premium
Click to expand...
Click to collapse
Yes I did this, but it wont reboot, the device cant exit magldr. i must pull of the battery, but then it stuck on htc splash
i think u have the same issue as me ...i cant reboot too ...in magldr it stuck on 123456 go go go ...and in clk it gives an error ...but the probleme disapear on windows ...try to flash wm ...if it's ok than its soething with android and u cant do nothing about ...i tried everything ...and no solution ...
mootmetal said:
i think u have the same issue as me ...i cant reboot too ...in magldr it stuck on 123456 go go go ...and in clk it gives an error ...but the probleme disapear on windows ...try to flash wm ...if it's ok than its soething with android and u cant do nothing about ...i tried everything ...and no solution ...
Click to expand...
Click to collapse
another problem is that I cant flash back to WM. It is stuck at the HTC Logo.
I flashed with sd-card and bootloader and with the installer on the pc, but no way it wont boot and theres no R G D at the buttom of the screen when the htc logo appears. pls help me ...
Is it possible that my memory blocks are damaged ?? because clk says: "Error cannot read recovery Header" and then it is stuck .
What radio are you using?
Sent from my NexusHD2 using xda premium
have you tried the "task29" with hd2 toolkit?
Same problem over here Impossible to reinstall WM, because task29 stops installing at 96%
kylew1212 said:
What radio are you using?
Sent from my NexusHD2 using xda premium
Click to expand...
Click to collapse
Iam using Radio Leo 2.15.50.14
ericw13 said:
have you tried the "task29" with hd2 toolkit?
Click to expand...
Click to collapse
Yees very often... i used task 29 every time before i flashed a new rom.
When you are using "task29", you stay still stuck on 96%??
if so, I suggest you try another USB port on your pc.
otherwise, your menu "magldr", it is functional?
Already tried to put it in another USB Magldr is functional, but I don't know what to do with it.
ericw13 said:
When you are using "task29", you stay still stuck on 96%??
if so, I suggest you try another USB port on your pc.
otherwise, your menu "magldr", it is functional?
Click to expand...
Click to collapse
No at me task 29 isnt stuck. and yes magldr is functional. but i need recovery to flash rom. first i entered usb flasher and all works fine, but then there stands: "Resetting phone" But it wont reset i must pull off battery !
XxxXxx896 said:
No at me task 29 isnt stuck. and yes magldr is functional. but i need recovery to flash rom. first i entered usb flasher and all works fine, but then there stands: "Resetting phone" But it wont reset i must pull off battery !
Click to expand...
Click to collapse
are you sure to have applied the correct partition settings. false if the rom is stuck on a screen. what is the rom you want to flash?
ericw13 said:
are you sure to have applied the correct partition settings. false if the rom is stuck on a screen. what is the rom you want to flash?
Click to expand...
Click to collapse
So far no rom because i cant flash the clockworkmod. there it wont reboot
XxxXxx896 said:
So far no rom because i cant flash the clockworkmod. there it wont reboot
Click to expand...
Click to collapse
by flashing with hd2 toolkit, you have errors that appears in the application?
ericw13 said:
by flashing with hd2 toolkit, you have errors that appears in the application?
Click to expand...
Click to collapse
No all is fine there is no error... the phone dont want reset... and i tried mtty (cubexe said to me) and there stands that the phone has some bad blocks but no way to erase them or to mark them, i really tried all tipps i have read...
i think the nand memory (hardware) is totally damaged...
searching on the net, I came across this software YAFFS nand explore. it is apparently able to correct the problem of "bad block" on Android phone, a view!!
Sent from my NexusHD2 using XDA App
ericw13 said:
searching on the net, I came across this software YAFFS nand explore. it is apparently able to correct the problem of "bad block" on Android phone, a view!!
Sent from my NexusHD2 using XDA App
Click to expand...
Click to collapse
Thank you for your answer. but i cant use this because its a app and i cant boot into android.. there is no OS on my htc hd2. i cant install any OS the bad blocks are at the beginning, in the middle and at the end of the nand memory i think there is no system which is so small to boot into. a tool for pc which correct the bad blocks would be very usefull but i tried it already with mtty and i think its made for htc devices and this tool cant erase / repair /mark the blocks... i dont know if there i another tool which can repair this... but if you know some other tools for pc pls tell me ))
Hi people,
I have the opportunity to buy a HD2 for only 10 euro,
only problem is broken usb connector in the phone itself.
Is it possible at all to flash recovery and roms, or do i have to repair it?
Thanks in advance
Re: [Q] broken usb
Check the version of hspl and radio.
With clk 1.5 + you can partition your nand!
It can also be installed via sdcard!
Have a read of the clk 1.5 thread for the hd2...
Sent from my NexusHD2 using xda premium
Magldr
I have aMagldr 1.13 installed, with a cm9 rom.
How can i flash android and windows phone roms without the use of the usb/computer?
thanks :angel:
michiel1995 said:
I have aMagldr 1.13 installed, with a cm9 rom.
How can i flash android and windows phone roms without the use of the usb/computer?
thanks :angel:
Click to expand...
Click to collapse
To be able to change android :
Get the clk 1.5 nbh file and put it on the root of your sd card (as you will not be able to partition nand with magldr.).
Restart the phone and hold down vol down button, when asked to continue push power button and wait for installation to complete.
Then to boot to clk, power on the phone holding the back button.
From the settings menu you can partition your nand, it will have installed with a default partition size of 150mb.
After partitioning your nand with the correct size for your chosen rom ( I recommend NexusHD2-JellyBean! by tytung) boot to recovery by holding home button on power up.
From there select Install zip from sdcard and install the rom by selecting the rom zip file, which of course you have already put on your sdcard!!
Read the rom thread for details of partition size etc etc..
To install windows phone - not sure .
Win mobile 6.5 place nbh on root of sdcard and reboot holding vol down etc. ( this will wipe clk).
Edit: Custom WM6.5 roms are ok,( not tested by me).
Also wanted to add a list of apps that help to survive without USB port...
WiF iADB,
RootExplorer
AirDroid
And TWRP Extended recovery for the HD2
Good luck...
shanman-2 said:
To be able to change android :
Get the clk 1.5 nbh file and put it on the root of your sd card (as you will not be able to partition nand with magldr.).
Restart the phone and hold down vol down button, when asked to continue push power button and wait for installation to complete.
Then to boot to clk, power on the phone holding the back button.
From the settings menu you can partition your nand, it will have installed with a default partition size of 150mb.
After partitioning your nand with the correct size for your chosen rom ( I recommend NexusHD2-JellyBean! by tytung) boot to recovery by holding home button on power up.
From there select Install zip from sdcard and install the rom by selecting the rom zip file, which of course you have already put on your sdcard!!
Read the rom thread for details of partition size etc etc..
To install windows phone - not sure .
Win mobile 6.5 place nbh on root of sdcard and reboot holding vol down etc. ( this will wipe clk).
Good luck...
Click to expand...
Click to collapse
Thank you very much, very clear explanation!
Now running jelly bean
I had to do NAND install because some error occured when installing on ext4
thanks a lot!
edit: now I have data on ext, formatted and repartitioned sd card :good:
michiel1995 said:
Thank you very much, very clear explanation!
Now running jelly bean
I had to do NAND install because some error occured when installing on ext4
thanks a lot!
Click to expand...
Click to collapse
How do you charge the phone?
Re: [Q] broken usb
jvzijp said:
How do you charge the phone?
Click to expand...
Click to collapse
With a battery charger, see image below.
Sent from my LG-P990 using xda app-developers app
michiel1995 said:
With a battery charger, see image below.
Click to expand...
Click to collapse
Ah yes, nice one.
I can also get my hands on a cheap HD2 with a broken USB port, but having an unavailable phone while charging is not an option for me. Also i charge a lot in my car. Maybe if i can get my hands on some spare batteries...
jvzijp said:
Ah yes, nice one.
I can also get my hands on a cheap HD2 with a broken USB port, but having an unavailable phone while charging is not an option for me. Also i charge a lot in my car. Maybe if i can get my hands on some spare batteries...
Click to expand...
Click to collapse
Spare batteries are very useful, charge one while using one.
I don't use my hd2 as a primary phone, only for fun, and backup if something happens to my o2x
Re: [Q] broken usb
Yeah I got 1 spare battery for my current hd2 (main phone) even though the usb port is working.
The hd2 with broken port I can get my hands on is still running stock wm6.5 so I think it's not flashable.
Sent from my NexusHD2 using xda app-developers app
michiel1995 said:
Thank you very much, very clear explanation!
Now running jelly bean
I had to do NAND install because some error occured when installing on ext4
thanks a lot!
edit: now I have data on ext, formatted and repartitioned sd card :good:
Click to expand...
Click to collapse
That's great.
Just a reminder that if you flash stock WM6.5 you will loose clk AND HSPL!!!
So best to stick with android and clk 1.5+ (there are other versions available which include twrp extended recovery thru' the great work of kokotas).
Actually even with stock wm6.5 you can run android using nativesd ext4 and haret.
Me thinks..
---------- Post added at 06:53 PM ---------- Previous post was at 06:50 PM ----------
I have also a broken usb device and solved charging by doing the powermat wireless charging mod, using the back under battery connector.
Re: [Q] broken usb
shanman-2 said:
That's great.
Just a reminder that if you flash stock WM6.5 you will loose clk AND HSPL!!!
So best to stick with android and clk 1.5+ (there are other versions available which include twrp extended recovery thru' the great work of kokotas).
Click to expand...
Click to collapse
And I will not be able to flash clk again? :/
Sent from my LG-P990 using xda app-developers app
@OP
Maybe changing thread's title would be more clear about its content...
My 0.02$ opinion...
pavlos46 said:
I have also a broken usb device and solved charging by doing the powermat wireless charging mod, using the back under battery connector.
Click to expand...
Click to collapse
Wait, what? Wireless charging on hd2? Without usb! Can I get some more info on that please?
Sent from my LG-P990 using xda app-developers app
pavlos46 said:
Actually even with stock wm6.5 you can run android using nativesd ext4 and haret.
Me thinks..
---------- Post added at 06:53 PM ---------- Previous post was at 06:50 PM ----------
I have also a broken usb device and solved charging by doing the powermat wireless charging mod, using the back under battery connector.
Click to expand...
Click to collapse
AFAIK flashing wm6.5 from sdcard will wipe hspl.
From pc it can be done.
Correct me if I am wrong...
shanman-2 said:
AFAIK flashing wm6.5 from sdcard will wipe hspl.
From pc it can be done.
Correct me if I am wrong...
Click to expand...
Click to collapse
This happens if you flash original stock wm6.5 rom , and if you flash custom wm6.5 roms you do not lose hspl. (via SDCard)
michiel1995 said:
Wait, what? Wireless charging on hd2? Without usb! Can I get some more info on that please?
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
About wireless charging its all up to whether your auxiliary back connector is live or not (unfortunately it's not on all models)
I actually stripped open a usb cable and attached the black and red cables on the back connector and device immediately fired up USB connected /charging.
Actually there is a powermat hd2 product that replaces your back plate and connects to that connector. Just make sure it works before hand.
pavlos46 said:
About wireless charging its all up to whether your auxiliary back connector is live or not (unfortunately it's not on all models)
I actually stripped open a usb cable and attached the black and red cables on the back connector and device immediately fired up USB connected /charging.
Actually there is a powermat hd2 product that replaces your back plate and connects to that connector. Just make sure it works before hand.
Click to expand...
Click to collapse
ehmm, what do you exactly mean by the auxiliary back connector?
the yellow or the red parts in beneath image?
yellow, they were intended (or so rumour has it) for use with a car kit that never made it to sale.
The red ones seem to mainly be sprung to keep the back tight, and also perhaps to ground the internal electronics, since they rest against bare metal on the cover.