Guys,
A few days back i flashed this rom "Lang HD2 Pdaimatejam Rom Wp7.8 OS 7.10.8858.136 RMT v8.7 >FULLY UNLOCKED> " on my hd2. After this my phone keeps on rebooting. I have tried flashing back windows 6.5 and it reboots on windows 6.5. I tried flashing recovery but as soon as i select ad recovery it reboots. i have too boot it up with usb cable. If i remove my usb cable it stopd booting. I checked my battery which is like new since i bought it a few days ago with a LED bulb and it works perfectly fine so i dont thinks its the battery drained or charging issue.
I have also tried restoring the HSPL to 2.08 and hacking it again but it just won boot. Please help me
thank you
no need to post same post in different topics... this is called as SPAM..
Related
Hey guys.
Got some issues during installing WP7.
After flashing MAGLDR1,12 and the newest radio rom 2.15.50.14, i flashed WP7 and watched my HD2 booting. After DFT screen, there should be Windows Phone Screen. But i got a graphic that shows i have to connect my phone to computer. I ve given it just some time, but it does reboot after 30sec. --> Bootloop. Does someone have these problems too?
So, I have installed HSPL 2.08. I flashed ChuckyDroid and it worked fine but I wanted more. So I flashed an Omega rom and it was cool but now I want to Flash Magldr1.3 and try wm7 or a nand android. The problem I am having is, when I start to flash the new rom, I get the HTC screen and 0% and it stays there forever. I end up pulling the battery and resetting the phone. I first tried with Mgldr then a few other wm6.5 roms with the same problem. Why can't I flash roms anymore?
I searched the thread and had no luck. I apologize in advance ir this has been covered before.
Try to flash stock Rom from tricolor or even from Your microSD card. And then hspl, magldr etc.
AzOutlaw said:
So, I have installed HSPL 2.08. I flashed ChuckyDroid and it worked fine but I wanted more. So I flashed an Omega rom and it was cool but now I want to Flash Magldr1.3 and try wm7 or a nand android. The problem I am having is, when I start to flash the new rom, I get the HTC screen and 0% and it stays there forever. I end up pulling the battery and resetting the phone. I first tried with Mgldr then a few other wm6.5 roms with the same problem. Why can't I flash roms anymore?
I searched the thread and had no luck. I apologize in advance ir this has been covered before.
Click to expand...
Click to collapse
How about this way.
Assuming you still can reach Boot Loader and You still have SPL 2.08 HSPL installed.
Go into bootloader screen and connect your phone using usb, and let the word: "serial" in the below of phone (the white color bar) changed to: "USB". If you fails, retry it using different ports, and dont forget to turn off your antivirus, firewall and internet connection, or even your screen saver.
While in bootloader, do "task 29", flash radio 2.15.xxx, install magldr 1.13 (all in sequence).
Assuming you succeed it. Now, we go into flashing NAND WP7 (or NAND Android).
Assuming that you already have NAND WP7 (or NAND ANDROID).
Go into magldr screen, you know how to do it right?
There, select option 5 (USB Flasher) and confirm it by pressing the phone call (green) button and connect your phone using usb to pc.
Run your NAND WP7 (or NAND ANDROID) rom.
Finish.
Good luck
Hey
I used the search button, but didn't find something that resembled my problem.
This is my problem:
*When I want to update my magdlr 1.11 to 1.13 through bootloader (I have
usb connection) the program keeps getting stucks at 0%
I have radio (Leo_RADIO_2.15.50.14) that support 576mb Ram and I use "ROMUpdateUtility", which I start as adminastrator.
*When I try to update to magdlr 1.12, the exact same thing happens :s
*Hopin' to start from the beginning: I use Task29, that aswell gets stuck at 0%
*When I want to start from the BEGINNING (back to 6.5 winm), I use the stock 1.66 NDL HTC HD2 which I used to downgrade my firmware. That also gets stuck at 0%
UPDATE:
I JUST DISCOVERED WHEN I USE THE "THE PDA PHONE ROM UPDATE UTILITY" i SEE THIS:
FROM: IMAGE VERSION: (NOTHING,COMPLETELY EMPTY)
TO: IMAGE VERSION: 2.0.00.00
I use the bootloader with spl-2.08.0000 with a WINDOWS 7 laptop 64bit in administrator mode and tried with 2 different usb cabels with/without a microsd card of 1GB. I flashed steps 1-6 (see below) with no problems and I tried several usb ports and rebooted the laptop several times.
I just bought a 2 week old HTC HD2.
I didn't remove Winm 6.5, when I installed Magdlr, WinM didnn't come up
These where my exact steps and all the files came from this site:
1) I downgraded the htc hd2 firmware to have spl to 1.6 from 3.03(something)
2) I used Hspl to Hspl 2.08 (something) (with windows center mobile 6.1 (update))
3) I updated the radio to Leo_RADIO_2.15.50.14
4) I used magdlr 1.11
5) I went to usb mass storage on magdlr and put "TyphooN_CM7_v2.5.1" (from this site) on the SDcard
6) I then went to USB flasher and went to the "Recovery 135M" (from this site) and executed DAF.exe and followed the steps
7) my phone rebooted
8) FROM THIS MOMENT ON,I REALISED I NEEDED MAGLDR 1.13 INSTEAD 1.11 AND FROM THIS MOMENT the HTC keeps at 0% when I try to do anything.
I hope you understand my ramblings.
Could you please help out, got this as a birthday gift and my dad is going to get pissed after using an iphone 2G for 5 years long :-(
2.08.0000 is stock, any spl in Bootloader that ends. 0000 is stock. Task29, magldr, all need hspl, 2.08.0000 is not hspl. Whenever you flash stock from SD card, hspl is gone.
Re apply hspl.
Man, If I were gay, you wouldn't know what I would do to you !!
I love you man, seriously, I'm staling you now
Hartendief said:
Hey
I used the search button, but didn't find something that resembled my problem.
This is my problem:
*When I want to update my magdlr 1.11 to 1.13 through bootloader (I have
usb connection) the program keeps getting stucks at 0%
I have radio (Leo_RADIO_2.15.50.14) that support 576mb Ram and I use "ROMUpdateUtility", which I start as adminastrator.
*When I try to update to magdlr 1.12, the exact same thing happens :s
*Hopin' to start from the beginning: I use Task29, that aswell gets stuck at 0%
*When I want to start from the BEGINNING (back to 6.5 winm), I use the stock 1.66 NDL HTC HD2 which I used to downgrade my firmware. That also gets stuck at 0%
UPDATE:
I JUST DISCOVERED WHEN I USE THE "THE PDA PHONE ROM UPDATE UTILITY" i SEE THIS:
FROM: IMAGE VERSION: (NOTHING,COMPLETELY EMPTY)
TO: IMAGE VERSION: 2.0.00.00
I use the bootloader with spl-2.08.0000 with a WINDOWS 7 laptop 64bit in administrator mode and tried with 2 different usb cabels with/without a microsd card of 1GB. I flashed steps 1-6 (see below) with no problems and I tried several usb ports and rebooted the laptop several times.
I just bought a 2 week old HTC HD2.
I didn't remove Winm 6.5, when I installed Magdlr, WinM didnn't come up
These where my exact steps and all the files came from this site:
1) I downgraded the htc hd2 firmware to have spl to 1.6 from 3.03(something)
2) I used Hspl to Hspl 2.08 (something) (with windows center mobile 6.1 (update))
3) I updated the radio to Leo_RADIO_2.15.50.14
4) I used magdlr 1.11
5) I went to usb mass storage on magdlr and put "TyphooN_CM7_v2.5.1" (from this site) on the SDcard
6) I then went to USB flasher and went to the "Recovery 135M" (from this site) and executed DAF.exe and followed the steps
7) my phone rebooted
8) FROM THIS MOMENT ON,I REALISED I NEEDED MAGLDR 1.13 INSTEAD 1.11 AND FROM THIS MOMENT the HTC keeps at 0% when I try to do anything.
I hope you understand my ramblings.
Could you please help out, got this as a birthday gift and my dad is going to get pissed after using an iphone 2G for 5 years long :-(
Click to expand...
Click to collapse
You're useless not the hd2 lol do your homework before doing anything would be a good idea.
Hartendief said:
Man, If I were gay, you wouldn't know what I would do to you !!
I love you man, seriously, I'm staling you now
Click to expand...
Click to collapse
Hehe, just put in a good word for me if judgement day arrives or alien overlords come a'conquering.
Thank you, thank you thank you SAMSAMUEL!!!!
Hey guys,
I use a android ROM for a couple of months. Last month it was a bit buggy, freezes suddenly but a restart fixed the problem. Today I had the same problem, but a restart gets me stuck in MAGLDR. I only get the title screen info on top.
I performed task29 and installed magldr again. Same problem, not able to get in the menu screen to flash a new rom.
What to do? Is my device bricked?
Just performed task 29 again, flash 2.15 radio and tried to flash with artemis rom. Get stuck on white HTC screen and it loops over en over.
What to do?!
Did you try reflashing the ROM?
I've tried to flash with artemis and I can't flash via magldr cause I get stuck on the title screen. There are no options on magldr, and yes I hold my powerbutton down.
Help is appreciated!
YES!
It boots on stock rom and everything is working fine. Can I install hspl 2.08 + mgldr again to flash an android rom? Or do I have to stuck with winmo?
I would try an SD ROM first just to see if Android will function.
Not sure if this will help. Sounds like the same issue.
http://forum.xda-developers.com/showthread.php?t=915839
everything is ok, sorry for opening a thread so soon but I was worried death.
For al people who have the same and read this tread:
-Performed task29
-Installed STOCK rom
-Performed task 29 again
-Installed radio 2.15
-Installed HSPL 2.08
-Installed MAGLDR
-Installed CWM
-Flashed android rom (on NAND)
Working like a charm!
I'm having the same problem... freeze when reading a message. Pulled out battery, starting HD2 and stuck on MAGLDR 1.13 forever.
Isn't this a MAGLDR issue ?
Hi all,
Three weeks ago I decided to make a switch from wm 6.5 to wp7 (hd2o 1.25 rom), installed magdlr 1.13 and
flashed the rom without, any problems.
I really started to like WP7 so I decided to built my own rom based on the latest build 8773, rom building wasn't a big problem
so it was time to flash my own rom, but there it went wrong, everytime I wanna flash the rom I
received an connection error, so I thought I must have done something wrong when I built my rom, so I switched
back to HD2O 1.25 rom but unfortunly I'm receiving the same connection error.
So I decided to go back to wm 6.5 and flash the original rom and install magdlr again to see if that makes
any difference, but I also received a connection error when I was trying to flash the original rom.
The next option I could try was flashing through usb, so I renamed the ruu and copied leoimg.nbh on my sd-card
but the phone doesn't recognized the nbh file, I tried several sd-cards but still the same problem.
But I still have magdlr on my device so I decided to try wp7 again, but still no luck, but I noticed that when dwi
is searching for usb it can't find the phone so while dwi was searching I unplugged and plugged my phone to my computer,
this time wp7 was going to flash but unfortunally it stops by partition 0.
The last option I could give a try was to flash Android, but still a connection error, but when I unplugged and
plugged my phone while dwi was waiting for usb flasher, the rom started to flash, so now I'm having Android on my
phone, but that is not what I want.
I checked my sd-cards on Android and noticed that 2 cards aren't recognized anymore, but the others are still working.
I can try the HD2Toolkit but what worries me is that I can't flash wm 6.5 on sd.
So I'm hoping someone can guide me into the right direction,
Greetz,
try reinstall ActiveSync (if you have XP) or WMDC (Vista/Win7)
Thanks buddy, that solved the problem
Greetz,