Hi all,
Three weeks ago I decided to make a switch from wm 6.5 to wp7 (hd2o 1.25 rom), installed magdlr 1.13 and
flashed the rom without, any problems.
I really started to like WP7 so I decided to built my own rom based on the latest build 8773, rom building wasn't a big problem
so it was time to flash my own rom, but there it went wrong, everytime I wanna flash the rom I
received an connection error, so I thought I must have done something wrong when I built my rom, so I switched
back to HD2O 1.25 rom but unfortunly I'm receiving the same connection error.
So I decided to go back to wm 6.5 and flash the original rom and install magdlr again to see if that makes
any difference, but I also received a connection error when I was trying to flash the original rom.
The next option I could try was flashing through usb, so I renamed the ruu and copied leoimg.nbh on my sd-card
but the phone doesn't recognized the nbh file, I tried several sd-cards but still the same problem.
But I still have magdlr on my device so I decided to try wp7 again, but still no luck, but I noticed that when dwi
is searching for usb it can't find the phone so while dwi was searching I unplugged and plugged my phone to my computer,
this time wp7 was going to flash but unfortunally it stops by partition 0.
The last option I could give a try was to flash Android, but still a connection error, but when I unplugged and
plugged my phone while dwi was waiting for usb flasher, the rom started to flash, so now I'm having Android on my
phone, but that is not what I want.
I checked my sd-cards on Android and noticed that 2 cards aren't recognized anymore, but the others are still working.
I can try the HD2Toolkit but what worries me is that I can't flash wm 6.5 on sd.
So I'm hoping someone can guide me into the right direction,
Greetz,
try reinstall ActiveSync (if you have XP) or WMDC (Vista/Win7)
Thanks buddy, that solved the problem
Greetz,
Related
Hi, I have installed HSPL and attempted to load android on my HD2 Leo phone with the latest version. Once to Flashed the ROM my phone booted to a very basic Windows Mobile Energy O/S which keeps trying to boot to android. Once it starts booting android I just get a blank screen and everything freezes.
I am trying to restore my original O/S but even when I do a hard reset it still loads up Windows Energy. If I try and flash my original Windows Mobile ROM HSPL loads on the screen but it gives me a USB error connections.
So basically, Im stuck with this basic Windows Mobile Energy. Can anyone help (step-by-step if possible) with how I can restore the original Windows Mobile ROM onto my HD2 Leo. This problem is really stressing me out!!!
Thank you so much!
You should really make sure you know what your doing before you do it.
Ok, first check on your bootloader screen to make sure your device has hspl installed correctly.
download the normal windows mobile rom for your device, put your device in bootloader mode and connect it to the pc using the usb cable.
Run the ruu program.
When I load up the HSPL screen and connect through USB it just gives me a USB connection error. That's part of the problem
I am getting the same error too..Did any find got a solution for this????/
flash rom from SD card be easier if ur having USB problems,
yes try flashing the phone from the micro sd card but you need to use a smaller size card like a 1GB or so. enter bootloader and the flash will automatically start.
have you tried a hard reset?
You can find the method in here!
http://forum.xda-developers.com/showthread.php?t=611433
First post, how to uninstall
Its very easy!
hello all,i am having a problem with wmdc on my pc running windows7 64 bit system,flashed dft wp7 the other night and activesync was working and my phone connecteto pc but since i flashed wp7 wmdc won't load and it keeps saying content not supported...please help.
You need Zune for WP7, not WMDC.
my phone automatically loads zune when i connect to computer and it says phone update available and goes thru the process but gives me and error that it didn't update.how can i get it to flash another wp7 rom?
Update doesn't work for HD2. To flash another ROM: boot into Magldr, select USB-Flash and flash the other ROM...
For detailed instructions use the search, this has been asked 1000 times before...
thanks,i have another rom downloade to my pc but it won't flash??????
Try to flash a stock ROM via the sdcard-method, this wipes magldr and WP7. Then try to flash your newly downloaded ROM again
thanks,will look up how to try that.
HI everyone,
This is the first time for me posting a thread here...thanks in advance.
Well I have a HTC HD2 that is a friends of mines. He was trying to change the radio so it could work in another country and managed to brick the phone. He got tired of trying to fix the phone so he gave it to me. I have tried fixing it with a tool kit I downloaded in another thread here. I managed to get it to boot butt it wouldn't get past T-Mobile screen...I kept on messing with it trying to install a ROM and different radios but non will work and wont turn on anymore but still is able to be recognize but PC(not mobile media center) and the last thing I did was task29. It stopped at 99%...still can load bootloader 3 colors but having a harder time getting the phone recognize by PC. Can anyone help me before I get into a deeper hole? If your need any more detail please ask me...btw the phone is running SPL- 3.03 HSPL in boot loader.
to the rescue !!
Jaimelebrone said:
HI everyone,
This is the first time for me posting a thread here...thanks in advance.
Well I have a HTC HD2 that is a friends of mines. He was trying to change the radio so it could work in another country and managed to brick the phone. He got tired of trying to fix the phone so he gave it to me. I have tried fixing it with a tool kit I downloaded in another thread here. I managed to get it to boot butt it wouldn't get past T-Mobile screen...I kept on messing with it trying to install a ROM and different radios but non will work and wont turn on anymore but still is able to be recognize but PC(not mobile media center) and the last thing I did was tasIt29. It stopped at 99%...still can load bootloader 3 colors but having a harder time getting the phone recognize by PC. Can anyone help me before I get into a deeper hole? If your need any more detail please ask me...btw the phone is running SPL- 3.03 HSPL in boot loader.
Click to expand...
Click to collapse
your friend shouldnt have flashed the radio without proper info !!
radio is the only thing which bricks the device !!!
dont worry we'll try to sort something out !!
firstly start with flashing a proper radio !!
http://forum.xda-developers.com/showthread.php?t=611787
download the radio 2.15.50.14 from this thread and flash it !!
NOTE : if you cant flash radio from ur pc, via nbh installer or the toolkit, you can flash it from a memory card !!
just format a normal memory card, put the radio on the card, rename the radio file to LEOIMG.nbh and get to the bootloader screen !!
follow the instructions from there and flash the radio !!
secondly if you want android or wp7-7.5 on ur device !! hspl 3.03 wont work !!
so install hspl 2.08 for that !!
for winmo6.5 3.03 is ok !!
do a task 29 once and flash any rom or magldr(for android or wp7-7.5)!!
good luck .....
thanks for quick reply
I am trying to do what you instructed me.
Didn't work
I tried it on the PC and it sadly stopped @ 96%, now it wont turn on volume down+power. Battery was charged and i didn't turn off. It displayed error 262. as soon as I can I will try it on sd card. Thanks though.
I was not able to install the radio but did in fact get to task29 successfully and MAGLDR Version-1.13. Now my phone is stuck in the Stick together screen. Can anyone help me from here what should I do. thanks I will be waiting for a responce.
Do you still need help cos its really easy to unbrick your phone and I say this because once I flashed 5 different roms in 2 hours or less and my phone wouldn't even turn on and when it did it would get stuck on the tmObile splash screen and restart but I fixed it and now I'm running the best Rom out there lol... reply to this thread and I'll tell you what to do
Sent from my HTC HD2 using xda premium
The thing is that I can't get any ROM's to finish installing...in the SD card the power button does not work...and in the computer the fartest I gotten was 99% but always stops and gives me error ussualy Error 262. Ireally don't know what to do. MY friend said he took it to an Asian Guy...I noticed that the battery S/N does not match the phone...can this have an effect...I haven't been able to flash any ROMS successfully not even the debranded stock. I flashed several phones and installed many different custom firmwares but this phone has been a real challenge...I'm over 2 weeks in...Thanks for the help thus far you guys are the best...
leoimg.nbh won't start to install
Hi everyone,
I have a severe problem with my HTC HD2 after installing a NAND version of android which did not work very well, than wanting to reinstall winmob 6.5 (vodafone) it startet "loading" the leoimg.nbh from the SD-card, but than stayed in this status neverending. So I interrupted (was that the mistake?? :-( }. Now I'm able to start MAGLDR 1.13, am also able to install another NAND version, but with every version I get the message: problem with android.xxx and so on.
I can start the bootloader modus (SPL-2.08.HSPL 8G XE), also connect by USB, but if I try to reload any leoimg.nbh from SD card - it does nothing, just stays in the bootloader modus.
Did I destroy any hardware by interrupting the non functioning "loading"?
Please help, if you can, what I could do now to get a functioning NAND android again!
Many thanks in advance!!!
freak just try the task 29 and u might return everything to normal condition
and for future never interrupt the installation process as u can brick ur device
for the main topic, i can say that ur device is fully bricked and the only way is taking it to the service center or try flashing directly into the hardware, but thats dangerous and requires professional skills
Plz help!
bigtobitobs said:
Do you still need help cos its really easy to unbrick your phone and I say this because once I flashed 5 different roms in 2 hours or less and my phone wouldn't even turn on and when it did it would get stuck on the tmObile splash screen and restart but I fixed it and now I'm running the best Rom out there lol... reply to this thread and I'll tell you what to do
Sent from my HTC HD2 using xda premium
Click to expand...
Click to collapse
Please can you help me.. I did the same thing.. it kept getting stuck at 0% and then i had to wait like an hour and then i tried again.. now its completely dead!
Please tell me what to do..
Thanks
First of all; This steps can solve your problem. But first of all(don't forget to check 2.08.HSL) try to use "Task29" and if it is success, load Radio ROM 2.15.50.14, and load original Winmo 6.5 ROM (Tmous or EU which phone do you use).
If you are stuck somewhere, then;
Download an original ROM for your HTC device from HTC webside.
- Format your SD card like FAT32 primary.
- Take "RUU_signed.nbh" from an original ROM and copy it to your SD card.
- Rename to "leoimg.nbh"
- Reset your device while pressing the volume down button.
Radio ROM 2.15.50.14;
Radio ROM 2.15.50.14
HD2 Toolkit 4.2.0.1; ( contains task 29, magldr and recovery and also HSPL)
HD2 Toolkit 4.2.0.1
it's revived!
powerofthink said:
First of all; This steps can solve your problem. But first of all(don't forget to check 2.08.HSL) try to use "Task29" and if it is success, load Radio ROM 2.15.50.14, and load original Winmo 6.5 ROM (Tmous or EU which phone do you use).
If you are stuck somewhere, then;
Download an original ROM for your HTC device from HTC webside.
- Format your SD card like FAT32 primary.
- Take "RUU_signed.nbh" from an original ROM and copy it to your SD card.
- Rename to "leoimg.nbh"
- Reset your device while pressing the volume down button.
After several attempts to switch on the phone it finally turned on so I immediately installed stock ROM and it didn't get stuck on 0%.. it worked!!
Do you think I should perform a task 29 now or I can just proceed with installing a new radio and then installing a new ROM?
Thanks again mate!
Apparently I need to install SPL 2.08 before trying to install HSPL and then run android.. anyone know where I can find it?
Nevermind figured everything out Thanks anyway
Click to expand...
Click to collapse
If you want to change your ROM with one another like Android NAND ROM or Windows 6.5 ROM, then use this procedures.
For NAND Android ROM; You must flollow this sequence;
first check your device if it is 2.08.HSPL, and format your sdcard ext3 or ext4 and 1gb (which one you must use is pointed out by your Android chief). Copy new Android ROM into your sdcard's FAT32 section. insert it into your HTC device.
1. do task29
2. instal radio rom 2.15.50.14
3. install magldr 1.13
4. do recovery 5.0.2.6
5. do clear cache and dalvik cache.
6. Choose your android ROM .zip file on sdcard, load and enjoy...
For Windows 6.5 Follow this sequence;
first check your device if it is 2.08.HSPL, Format your sdcard like FAT 32 primary partition. insert it into your HTC device.
1. do Task29
2. Install Radio ROM 2.15.50.14
3. Run LeoCustomRUU.exe like "Run as Administrator" which Windows 6.5 rom you chose to use.
Radio ROM 2.15.50.14;
Radio ROM 2.15.50.14
HD2 Toolkit 4.2.0.1; ( contains task 29, magldr and recovery and also HSPL)
HD2 Toolkit 4.2.0.1
ActiveSync
Hi..
I am new here...
I would like to ask about my htc hd2..
I ve installed android 2.3 and yesterday i tried to update to android 4.0 but something went wrong and now my phone can't load anything...
when i tried to install ROM, it shows phone is not connected...
My ActiveSync also doesn't detect my phone... I can't enter to phone settings coz the phone won't load...
Any ideas ?
Thanks...
Zerocool_uia said:
Hi..
I am new here...
I would like to ask about my htc hd2..
I ve installed android 2.3 and yesterday i tried to update to android 4.0 but something went wrong and now my phone can't load anything...
when i tried to install ROM, it shows phone is not connected...
My ActiveSync also doesn't detect my phone... I can't enter to phone settings coz the phone won't load...
Any ideas ?
Thanks...
Click to expand...
Click to collapse
Are you booting into bootloader and connecting the device to your computer so you can get the HTC Sync connection. Just boot into bootloader by holding the volume down button down and poewering on your device. Connect it to your computer via USB and when you see Serial in the white bar of boo5tloader change to USB you have the HTC Sync connection and can flash your device.
I face a very odd problem with my HD2 EU. After years of 2 different versions of Android on nand I decided to reset it to stock(Vol down+power with leoimg.nbh in root of a FAT32 formatted microsd). When I get in bootloader mode there seem to be 2 instances of bootloader. The first 3 colour screen with all the right wordings lasts a second or two then I get a second 3 colour screen with the same wordings. With my Verbatim 8Gb class4 microsd formatted FAT32 and leoimg.nbh (obtained from the original RUU_Leo_HTC_ITA_1.66.408.1_Radio_15.32.50.07U_2.07.51.22_2_Signed_LEO_Ship.exe) in the root directory, the device does not recognize the file and it's not possible to restore the phone to stock, but I can only get into usb connection.
Being able to get in usb mode with the various versions of HSPL (1-2-3-4) I can still change the bootloader. With the HD2 Android toolkit 4.2.0.1 I can install cLK, Magldr, do a Task29 and repartition.
When I use the RUU installer I can install the RUU_signed.nbh that I used to get the leoimg.nbh BUT when I do it, and it does finish gracefully, on the screen that states the currently installed image THE INDICATION OF SUCH AN IMAGE IS BLANK whilst the name of the image to install is the one I am flashing.If I reflash the same image AGAIN (so I know what's on the device) the info of the installed image is never displayed.So after trying the various bootloaders HSPL and SPL and getting the same result you are my only resort.
Has anybody experienced such a problem? It is as if the the bootloader goes through a script that then starts a second "identical" bootloader (I understand that I may seem crazy) that is not capable of recognizing a leoimg.nbh. All my buttons are still working so it's definitely not a button problem. Therefore in a nutshell the question is: if I can't get the device to recognize a leoimg.nbh is there any other way to make it do so, given that I can communicate via usb without problems ?
have android 4.0 on HD2 and it sucks bad..
how do I restore back to original OS windows 6.5
1. Download any WM 6.5 ROM for your phone you like,
2. power off your phone,
3. power it on while holding vol-down button (you should see 4-colour "matress"),
4. connect hd2 with usb cable to your desktop PC, run WM6.5 flasher.
5. Done... ))
i do that but the flasher says this after it recognize the phone and start flashing it stops and says this error{226} the update utility cannot get response from your PDA phone. please check that your ubs craddle/cable is connected properly between the pc and your pda phone and also check your pda phone.
i tried several times and i cant, even with stock rom, the ics rom it have in it is nand anybody help
Try this one.
http://forum.xda-developers.com/showpost.php?p=6933055&postcount=14111
For custom rom. try this.
http://forum.xda-developers.com/showthread.php?t=591784
I flash my hd2 using energy rom dinik. with radio 2.12.50.02_2.
So far I have not encountered any bug like freezing of lcd.
Thanks NRGZ28 for the rom and PG101 for the detailed instructions to install custom rom to my phone.
Yeh I would recomend NRG wm6.5 roms too, best wm6.5.3 experience available & it works perfect.
Try flashing via sd & check you current HSPL & radio are suitable too ...
yeah im actually trying to flash a wm6 from NGR but then again this phone have nand android installed and when i try to flash the wm6 ruu the flasher stops at 0% and says that the phone its not connected, after it showed it did before i pressed next, do i need any kind of drivers?
i have ht drivers from my sensation are they the same? i am a total noob for this phone and i dont like the ics thats why i wanna go stock while i learn little by little how to do things with it.
Flash via SD card method is probably way to go but take care with radio versions if a TMOUS HD2 or you will brick it.
You could install ActiveSync if XP or WMDC6.1 for Vista/W7 as it has drivers.
you can do a factory reset which should fix the problem
Dear Dev's / members
I have problem with this HD2 and cannot find a solution yet!
first thing first. is this a Tmobile of Eu mobile?
i tried flashing factory RUU but after 1% it gives an error saying Radio failed.
tried flash quite a few radio's but still after 100% it says radio fail.
tried flashing from USB cable
tried flashing from SD with leoimg.nbh
no luck.
the guy was using android on it until yesterday. may be he tried to flash a wrong Rom which brick the phone. now only white screen appears.
i can go to bootloader mode but no luck in flashing any thing at all.
Looks like EU model as no logo near earpiece.
if also has white markings on call & end key that would help confirm EU.
If trying to install .nbh file from SD it will overwrite HSPL so check current SPL status in bootloader.
If still on HSPL 2.08 try flashing an NRG WM6.5 ROM & see what happens (they have no radio so if completes then try radio flash if needed, try via USB them SD if USB fails.
Do you get an error code when it fails via RUU ?
thanks for helping mr. B
the error i get is (270) and yes it have white markings on all the buttons. so its confirm EU model. by NRG rom you mean Energy Roms? i tried earlier the energy Rom but no luck. after 1% it gives error.
cannot try mtty method as i'm on windows 7 and in windows 7, it's not showing the USB port. it's radio is corrupted. i think someone must have flashed a wrong Rom.
What standard ROM have you got ? if it a 3.14 rom try connecting HD2 via USB & use HSPL4 toolkit to install HSPL 3.03 & if that installs then try the 3.14 ROM via USB & RUU.
Also eliminate simple issues such as lead & USB port by switching port & using a different USB lead.
Windows 7 64bit ? worth trying another PC & 32bit if can as WMDC drivers on 64bit can be a pain for flashing ...
windows 7 32bit. tried flashing hspl 4 and it says complete but in bootloader it shows 2.08 only. i guess gold card method will solve the problem but it's too complicated. any other suggestions?
i would search for task29 and format the phone back to virgin default then download a windows rom from htc via the downloads page on there website for the phone ,then if it works re task29 it then put android on it with the htc hd2 tool kit witch has every thing other than rom (all u need to do is task29 it then go back to the boot loader and run the ruu rom)
samuel79 said:
i would search for task29 and format the phone back to virgin default then download a windows rom from htc via the downloads page on there website for the phone ,then if it works re task29 it then put android on it with the htc hd2 tool kit witch has every thing other than rom (all u need to do is task29 it then go back to the boot loader and run the ruu rom)
Click to expand...
Click to collapse
No do not run a Task 29 the device. I say this for two reasons, one if you flash the Stock Windows Mobile ROM via RUU the RUU will run a Task 28 before installing the ROM witch is pretty much the same as a Task 29. The second reason is that if you run a Task 29 it will remove the current ROM on the device so it will not have a working ROM anymore. If after the Task 29 you can not get another ROM installed on it the you will not be able to use the device at all anymore.
why not he thinks its bricked so there is no difference if he cant get a rom on it
samuel79 said:
why not he thinks its bricked so there is no difference if he cant get a rom on it
Click to expand...
Click to collapse
No the device is not bricked, a bricked device will not even turn on at all, no vibrations no nothing.
At jacktackle, try to find the earliest stock Rom RUU for your HD2 and try to flash it. It is possible you have what is reffered to as a stuck radio.The only fixI have seen for this is to flash a older ROM version with a older SPL version. If the earliest ROM version does not work start working your way up one version at a time and you might get lucky and get one that will flash.
thanks for all the help guys. but nothing worked. tried flashed old ruu's but reboots at 1% this radio is screwed up. hspl 2.08 is not upgrading nor downgrading. sd card update not working. i guess thats it. will give it back to him so that he can showcase it
first time ever i'm un successful. bad luck! may this LEO rest in peace. 'amen'
jacktackle said:
thanks for all the help guys. but nothing worked. tried flashed old ruu's but reboots at 1% this radio is screwed up. hspl 2.08 is not upgrading nor downgrading. sd card update not working. i guess thats it. will give it back to him so that he can showcase it
first time ever i'm un successful. bad luck! may this LEO rest in peace. 'amen'
Click to expand...
Click to collapse
Before you give it back you can find some of the old test ROMs for the EU or for the TMOUS depending on which version of the HD2 it is. Just make sure if it is a TMOUS that you do not flash a rom version that has a 51 radio with it. Just look at the RUU name and the radio version is in the name. If that does not work then the only fix will be to replace the mainboard cause JTAG would not fix the problem.