Database Users

Can't seem to instal ROM

Hey guys & gals,
Prob been asked many times but I can't find the right answer anywhere.
My friend has a HD2 on O2 network in the UK, we have installed SPL 2.08.HSPL
We then set the Radio to 2.07.50 as stated in the 'energy' rom thread.
We downloaded the Energy Dinik Glass ROM but every time we try to install this ROM we get 'error 244 "Invalid Model ID" '
Any ideas on what we are doing wrong?
thanks
Darren

wrong thread sorry

double check you 'really' installed 2.08.hspl. Many people choose '2.08.0000' in the hspl dropdown instead of 2.08.hspl
.0000 means stock.
.hspl means hacked
Boot into bootloader and see what it says next to 'spl'.
If it ends .0000 then hspl isn't installed.

Removed, wrong thred responded to

samsamuel said:
double check you 'really' installed 2.08.hspl. Many people choose '2.08.0000' in the hspl dropdown instead of 2.08.hspl
.0000 means stock.
.hspl means hacked
Boot into bootloader and see what it says next to 'spl'.
If it ends .0000 then hspl isn't installed.
Click to expand...
Click to collapse
Yup definatley 2.08.HSPL, I checked this morning because I didn't believe he had done it by himself (hes not technical minded & gets me to do all his dirty work)
After HSPL I changed his radio as it was runing something like 2.07.51xxxxx
I was thinking maybe its a American ROM and he has a UK phone?

drunken_prozac said:
I was thinking maybe its a American ROM and he has a UK phone?
Click to expand...
Click to collapse
wouldn't matter, tmous roms work fine on euro leo, just not the other way around.
not sure what to suggest. if anything occurs I'll be sure and post it.
in the meantime, i think I'd go back to stock (stock rom through sd card) and start over.

ok,
I downloaded the standard energy ROM and that worked first time!
he wanted the Glass version so I will look into it.
Thanks for your help and I will let you know if it is the glass ROM
Darren

MAGDLR 1.12 and android

Hi im using android from my sd card and i woud like to try nand as i never use winmo
so my question is, is my radio 2.12 compatible with magdlr and android from nand?
and i have HARDSPL 2

anyone? i need to know before i try something stupid and brick my phone

go ahead enjoy. any radio above 2.08 is ok..since you already have hspl, flash magldr 1.12 and then android, enjoy you have hspl, now its brick proof...go on

pakure said:
go ahead enjoy. any radio above 2.08 is ok..since you already have hspl, flash magldr 1.12 and then android, enjoy you have hspl, now its brick proof...go on
Click to expand...
Click to collapse
Nearly right - any radio above 2.08, but must be a .50 version, NOT a .51. Just be sure about that

my leo is a 512mb t8585 so im fine right?

Yes mate. You'll need to get HSPL installed in order to use magldr though. You can get that here...
http://forum.xda-developers.com/showthread.php?t=611433
See post 2 for HSPL3 (2.08)

i already have it HSPL2
radio version 2.12.50.02_2
and one more question in my contry somtimes the power goes of and if it does while installing android on nand any chance of brick?

metko said:
and one more question in my contry somtimes the power goes of and if it does while installing android on nand any chance of brick?
Click to expand...
Click to collapse
unlikely. most flashing errors that result in serious problems happen when the fail occurs whilst the spl or the radio portion are being flashed.
neither of these parts are flashed when flashing a nand rom, cos they're already set.
If a bad nand flash occurs, just go into bootloader/magldr and you should be able to flash again.
Changing radio, and flashing stock wm roms are the ones you wanna be carefull of. If your power is shakey, don't flash these too often.

ok thnx will try most likely mdj's cynanogen mod 7 today

BIG THNX to everyone i can not click thnx that many times
instaled MAGLDR1.12 then md'j cynanogen mod 7 2.3 gingerbread, i did al of this for about 10 min soo fast ,again thnx to everyone

HD2 Nandflash

Hi guys, i am new to the HD2 phone flash! i'm used to the Rhodium, but resently bought this HD2, and now i'm flashing the the phone to a NAND flash of android and i'm, folowing the "how to flash" guide but everytime i try to flash the magldr113 the setup said, setup complete phone will now reboot into magldr113 menu, but it doesnt.
the phone has a HardSPL flash and i ran task29 did i do annything wrong?

lord-whiskey said:
Hi guys, i am new to the HD2 phone flash! i'm used to the Rhodium, but resently bought this HD2, and now i'm flashing the the phone to a NAND flash of android and i'm, folowing the "how to flash" guide but everytime i try to flash the magldr113 the setup said, setup complete phone will now reboot into magldr113 menu, but it doesnt.
the phone has a HardSPL flash and i ran task29 did i do annything wrong?
Click to expand...
Click to collapse
You need flash MAGLDR, then flash CWM Recovery with right size, after that flash which Rom you like.
Search in Box, many topic guide you do that or go to Thread of Rom you want also have guide
Sent from my HTC HD2 using XDA App

there's a problem i cant get the phone into MAGLDR i flashed it a zillion times

Which HSPL do you have?
You have to have HSPL3 installed, not HSPL4, that one does not work with MAGLDR.
And please post your questions in the Q&A Forum not in the development forum.

Cheech1976 said:
Which HSPL do you have?
You have to have HSPL3 installed, not HSPL4, that one does not work with MAGLDR.
And please post your questions in the Q&A Forum not in the development forum.
Click to expand...
Click to collapse
Sorry sir, but you are wrong. HSPL4 will work untill and unless you select "2.08.HSPL" during installation, there is as such nothing called "HSPL4". The latest spl is 3.03 for use with 3.14 roms.
Just grab any HSPL binary and select "2.08.HSPL" to install and you should be fine, the recommended radio is "2.15.50.4" atleast that's what i use.

Rick_1995 said:
Sorry sir, but you are wrong. HSPL4 will work untill and unless you select "2.08.HSPL" during installation, there is as such nothing called "HSPL4". The latest spl is 3.03 for use with 3.14 roms.
Just grab any HSPL binary and select "2.08.HSPL" to install and you should be fine, the recommended radio is "2.15.50.4" atleast that's what i use.
Click to expand...
Click to collapse
Yes you are right
What i meant with HSPL3 and HSPL4 as a matter of fact were the file names themselves (http://forum.xda-developers.com/showthread.php?t=611433).

i've got HSPL 2.08 but the flash setup sais 100% complete your phone will reboot but it only reboot to its splashscreen

lord-whiskey said:
i've got HSPL 2.08 but the flash setup sais 100% complete your phone will reboot but it only reboot to its splashscreen
Click to expand...
Click to collapse
I´d try going way back to WinMo stock Rom and starting fresh with hspl2.08, task29, radio 2.15... (or 2.12 you´d have to try which one works better and uses less power), maybe a first splash screen, magldr113, cwm 4.0.1.4....

Rick_1995 said:
Sorry sir, but you are wrong. HSPL4 will work untill and unless you select "2.08.HSPL" during installation, there is as such nothing called "HSPL4". The latest spl is 3.03 for use with 3.14 roms.
Just grab any HSPL binary and select "2.08.HSPL" to install and you should be fine, the recommended radio is "2.15.50.4" atleast that's what i use.
Click to expand...
Click to collapse
Sorry could you explain a bit more? I flashed HSPL 2.08 via HSPL4 package and also flashed a custom WinMo ROM, so I'll be fine to flash MAGLDR right? Your post has slightly confused me, so any explanation would help.

Nigeldg said:
Sorry could you explain a bit more? I flashed HSPL 2.08 via HSPL4 package and also flashed a custom WinMo ROM, so I'll be fine to flash MAGLDR right? Your post has slightly confused me, so any explanation would help.
Click to expand...
Click to collapse
At First you need hspl 2.08 installed and than you need a radio rom which supports the 576mb ram this are the radio roms above 2.07 .The radio roms you can find in this thread http://forum.xda-developers.com/showthread.php?t=611787
and than flash magldr if it stucks at the splash screen it means that you have no 576mb ram radio rom installed after you succesfull installation of magldr install the cwm there are a lot of threads where an how to is download the tool from ksubedi it is easier for newbies.
EDIT: ksubedis toolkit you can find here http://forum.xda-developers.com/showthread.php?t=1090783

[Q] Not booting after MAGLDR flash

Hey, my sister got a HD2 off ebay, and asked me to flash it to android, so i got to the point of installing MAGLDR, and after it successfully flashes, it doesn't boot into it, it just hangs on the HTC boot logo. I used to have a HD2, but it came pre-flashed with android.
I have flashed it with HardSPL too, before you ask.

how long did you wait? sometimes it takes 10+minutes before it boots.
did you try an SD version? it also boots via Magldr.

What steps did you take?
Did you task29 before flashing magldr?
My advice get the hd2 nand toolkit and Task29 before Flashing magldr
http://forum.xda-developers.com/showthread.php?t=1090783

Symptom - Flashed magldr folowed by hanging at splashscreen and not entering magldr menu.
Cause - nearly always caused by forgetting that magldr WILL ONLY start when spl =2.08.hspl -AND- radio is tmous compatible (meaning 2.07.50 or higher, where the .50 is not. 51,,, 2.08.50 will work 2.08.51 wont)
Go flash radio 2.15.50 and whilst you are in bootloader check what the spl line says.

I think i forgot the radio flash, will try it tomorrow.

You have to be careful with the Radio flashing. It is a good way of bricking your phone. I have had the same radio on my HD2 since I got it and never needed to change it. I have ICS running on it now and I am still on the same radio. You may have used the wrong version of HSPL when you flashed that portion. I would make it stock and start from scratch...follow this guide to make it stock and start from the begining.
http://www.jayceooi.com/2011/08/15/how-to-restore-stock-rom-on-htc-hd2-video/

You only need to worry about flashing an incompatible radio with TMOUS phones, and as far as I know you shouldn't ever need to change the radio of those for Android anyway, so everything should be fine.
Sent from my HTC HD2 using XDA

Nigeldg said:
You only need to worry about flashing an incompatible radio with TMOUS phones, and as far as I know you shouldn't ever need to change the radio of those for Android anyway, so everything should be fine.
Sent from my HTC HD2 using XDA
Click to expand...
Click to collapse
Actually, I don't think the OP mentioned the type of HD2. It could be either us or int.
Sent from my HTC View in LALA land.

Updated the radio, worked fine.
thanks for the help guys

stevedebi said:
Actually, I don't think the OP mentioned the type of HD2. It could be either us or int.
Sent from my HTC View in LALA land.
Click to expand...
Click to collapse
We can safely assume he's got an EU phone as not only is he from the UK but he's got a .51 radio (Android isn't booting), and I think that all of the TMOUS phones come stock with a .50 radio (or bricked )

Same Problem
I know...I know I'm about to get a beat-down for not reading the forums properly on xda but, there's soo much information that I don't know where to start! It will be much appreciated if someone can help:
I got a HTC HD2 on T-Mobile (UK) - I have the one that reads 448mb of RAM
It has the latest official ROM since it was downloaded from the HTC site (site link no longer available)
The radio version is 2.15.50.14
I have also installed HSPL (it reads SPL-3.03.HSPL)
Tried to install MAGLDR via the HD2 Android NAND Toolkit
Now my phone wont bootup....just stuck at the loading screen (the pink circle arrow)
What do I do? :-s

You need hspl 2.08 to do install magldr!
clk works with 3.03.
I
Sent from my NexusHD2 using xda premium

If you know you're going to get flamed for not reading properly, surely the logical thing to do would be to go back and start reading properly? As shanman said, MAGLDR requires HSPL2.08 which you would have realised if you read any one of the numerous guides available (e.g. the one in my sig).

Nigeldg said:
MAGLDR requires HSPL2.08 which you would have realised if you read any one of the numerous guides available (e.g. the one in my sig).
Click to expand...
Click to collapse
or even sentence 4 of post 1 in the magldr thread, , , nice bold lettering.

[Q] HD2 Problems

I bought a used HD2 running CM10(NexusHD2-JellyBean v1.3a). I want to run WP7.8 on it so I looked up the ways to do that. Tutorials like http://forum.xda-developers.com/show...postcount=1193 say to flash a stock winmo6.5 rom before moving to WP7. I tried to do that by trying to flash RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2. 15.50.14_LEO_S_Ship. The normal RUU Updat Utility came up with lots or errors, but mostly connection or no response from device issues. So upon further reading i found out an alternate way to go about it by renaming the nbh and putting it in an sd card. I used 2GB microSD card and tried to flash it. But mid-way it stopped and upon reboot it said software update failed with a triangle. I went into the 3-color screen and there the message was present as well with two other messages microp led and microp touch. I tried the sd flash method again but it stopped by giving a not allow 00028002 error every time. I flashed HSPL 2.08.000 from the HSPL4 executable and Android booted up again.
i also tried RUU_Leo_S_TMO_UK_3.14.110.1_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship_2 but the same update error(266, i think) came up
Can i now go to a stock rom and then to WP7?
Thanks, in advance
Device details:
Boots with purple "stick together" logo(Weird, google search says this is tmobile america slogan yet this device is not US)
S/N:ht04anw01415
HTC HD2 T8585 P81100 (from the back)

Anyone?

follow the links below & your ready togo

mengfei said:
follow the links below & your ready togo
Click to expand...
Click to collapse
thanks for the reply but i want to go back to the stock rom which it seems i'm unable to do. i tried the usb flash and microsd flash methods with both RUUs. if i get to stock then i can proceed to wp7 with a clean slate. ATM i've flashed energy rom (Energy.Leo.29022.Sense2.5.Reference.Jul.05) with radio 2.15.50.14 in an attempt to see if doing this would help flash stock rom but no success.

IF you want WP7 no need to go back to stock ROM, I guess you haven't take a look at this link
http://forum.xda-developers.com/showthread.php?p=25781675#post25781675
once you have Magldr in your HD2, next steps would be easy as pushing a button

got windows phone 7.8 on it, thanks. But what if i want to later on return to stock rom? even when i was trying to wipe with task29 it was giving same error 266 and as of yet i haven't successfully flashed anything by the RUU method.

HD 2 Problems Win7
hi guys
Yesterday I tried to install HD2 WP7 ... and install a new Radio ROM my phone off, and since I did not start .... no reset button under the battery cover does not work .... it happened to anyone of you?? ... I had previously installed the official 6.5

Ralph79 said:
hi guys
Yesterday I tried to install HD2 WP7 ... and install a new Radio ROM my phone off, and since I did not start .... no reset button under the battery cover does not work .... it happened to anyone of you?? ... I had previously installed the official 6.5
Click to expand...
Click to collapse
Nope but then again, i never had to flash another radio. Try to follow the tutorial in mengfei's signature and if it doesn't work create a separate thread for others to weigh in.

geforceonline said:
Nope but then again, i never had to flash another radio. Try to follow the tutorial in mengfei's signature and if it doesn't work create a separate thread for others to weigh in.
Click to expand...
Click to collapse
If you want stock windows mobile (with HSPL) > Use HSPL to flash windows mobile using the RUU.
If you want stock winmo AND stock spl > Install winmo using HSPL, then use HSPL package to uninstall HSPL (i.e. install stock SPL).
That's the only way I can think of since you're getting lots of errors doing anything without HSPL.

Marvlesz said:
If you want stock windows mobile (with HSPL) > Use HSPL to flash windows mobile using the RUU.
If you want stock winmo AND stock spl > Install winmo using HSPL, then use HSPL package to uninstall HSPL (i.e. install stock SPL).
That's the only way I can think of since you're getting lots of errors doing anything without HSPL.
Click to expand...
Click to collapse
I presume you're talking about the regular USB>3-color screen>RUU(on pc) method. Well, i've been doing that for stock roms and other stuff(splashes, etc.) too but i almost always seem to get error 266 update error.

geforceonline said:
I presume you're talking about the regular USB>3-color screen>RUU(on pc) method. Well, i've been doing that for stock roms and other stuff(splashes, etc.) too but i almost always seem to get error 266 update error.
Click to expand...
Click to collapse
If you don't have HSPL, you will get an error when trying to flash almost anything.
You said you flashed HSPL, but in fact you didn't
geforceonline said:
.. I flashed HSPL 2.08.000 from the HSPL4 ..
Click to expand...
Click to collapse
From HSPL4 you can flash the stock SPL, which is what you did. HSPL 2.08.0000 is stock SPL. With that, you can't do much.
You need 2.08.HSPL.
Try again and report back.

Marvlesz said:
If you don't have HSPL, you will get an error when trying to flash almost anything.
You said you flashed HSPL, but in fact you didn't
From HSPL4 you can flash the stock SPL, which is what you did. HSPL 2.08.0000 is stock SPL. With that, you can't do much.
You need 2.08.HSPL.
Try again and report back.
Click to expand...
Click to collapse
I just tried the USB RUU(with WWE and TMOUK versions) method with 2.08.HSPL and it gave the same error 266

geforceonline said:
I just tried the USB RUU(with WWE and TMOUK versions) method with 2.08.HSPL and it gave the same error 266
Click to expand...
Click to collapse
Try this easy fix:
http://forum.xda-developers.com/showthread.php?t=993472
To sum it up:
*Try a different port.
*Install ActiveSync/WMDC.
*If already installed, uninstall then re-install, or simply try a different computer if you have.

Marvlesz said:
Try this easy fix:
http://forum.xda-developers.com/showthread.php?t=993472
To sum it up:
*Try a different port.
*Install ActiveSync/WMDC.
*If already installed, uninstall then re-install, or simply try a different computer if you have.
Click to expand...
Click to collapse
have WMDC/Zune and drivers(also had activesync but deleted it because even then it didnt work)
tried all three ports
reinstalled it as well but unfortunatly no other pc is available atm

geforceonline said:
have WMDC/Zune and drivers(also had activesync but deleted it because even then it didnt work)
tried all three ports
reinstalled it as well but unfortunatly no other pc is available atm
Click to expand...
Click to collapse
Well, I am sorry then. I am out of ideas; you have wait for other members with greater knowledge.
Edit:
Maybe the USB cable? Although I highly doubt it, there is no harm in trying. Try a different cable and see what happens.

Marvlesz said:
Well, I am sorry then. I am out of ideas; you have wait for other members with greater knowledge.
Edit:
Maybe the USB cable? Although I highly doubt it, there is no harm in trying. Try a different cable and see what happens.
Click to expand...
Click to collapse
well, thanks for trying!
edit: IT WORKED! I tried another cable and while recognizing the pc went to some qualcomm drivers that i used to have and reverted to htc ones and the RUU picked it up and the flashing commenced. Thanks a ton!