Hey, my sister got a HD2 off ebay, and asked me to flash it to android, so i got to the point of installing MAGLDR, and after it successfully flashes, it doesn't boot into it, it just hangs on the HTC boot logo. I used to have a HD2, but it came pre-flashed with android.
I have flashed it with HardSPL too, before you ask.
how long did you wait? sometimes it takes 10+minutes before it boots.
did you try an SD version? it also boots via Magldr.
What steps did you take?
Did you task29 before flashing magldr?
My advice get the hd2 nand toolkit and Task29 before Flashing magldr
http://forum.xda-developers.com/showthread.php?t=1090783
Symptom - Flashed magldr folowed by hanging at splashscreen and not entering magldr menu.
Cause - nearly always caused by forgetting that magldr WILL ONLY start when spl =2.08.hspl -AND- radio is tmous compatible (meaning 2.07.50 or higher, where the .50 is not. 51,,, 2.08.50 will work 2.08.51 wont)
Go flash radio 2.15.50 and whilst you are in bootloader check what the spl line says.
I think i forgot the radio flash, will try it tomorrow.
You have to be careful with the Radio flashing. It is a good way of bricking your phone. I have had the same radio on my HD2 since I got it and never needed to change it. I have ICS running on it now and I am still on the same radio. You may have used the wrong version of HSPL when you flashed that portion. I would make it stock and start from scratch...follow this guide to make it stock and start from the begining.
http://www.jayceooi.com/2011/08/15/how-to-restore-stock-rom-on-htc-hd2-video/
You only need to worry about flashing an incompatible radio with TMOUS phones, and as far as I know you shouldn't ever need to change the radio of those for Android anyway, so everything should be fine.
Sent from my HTC HD2 using XDA
Nigeldg said:
You only need to worry about flashing an incompatible radio with TMOUS phones, and as far as I know you shouldn't ever need to change the radio of those for Android anyway, so everything should be fine.
Sent from my HTC HD2 using XDA
Click to expand...
Click to collapse
Actually, I don't think the OP mentioned the type of HD2. It could be either us or int.
Sent from my HTC View in LALA land.
Updated the radio, worked fine.
thanks for the help guys
stevedebi said:
Actually, I don't think the OP mentioned the type of HD2. It could be either us or int.
Sent from my HTC View in LALA land.
Click to expand...
Click to collapse
We can safely assume he's got an EU phone as not only is he from the UK but he's got a .51 radio (Android isn't booting), and I think that all of the TMOUS phones come stock with a .50 radio (or bricked )
Same Problem
I know...I know I'm about to get a beat-down for not reading the forums properly on xda but, there's soo much information that I don't know where to start! It will be much appreciated if someone can help:
I got a HTC HD2 on T-Mobile (UK) - I have the one that reads 448mb of RAM
It has the latest official ROM since it was downloaded from the HTC site (site link no longer available)
The radio version is 2.15.50.14
I have also installed HSPL (it reads SPL-3.03.HSPL)
Tried to install MAGLDR via the HD2 Android NAND Toolkit
Now my phone wont bootup....just stuck at the loading screen (the pink circle arrow)
What do I do? :-s
You need hspl 2.08 to do install magldr!
clk works with 3.03.
I
Sent from my NexusHD2 using xda premium
If you know you're going to get flamed for not reading properly, surely the logical thing to do would be to go back and start reading properly? As shanman said, MAGLDR requires HSPL2.08 which you would have realised if you read any one of the numerous guides available (e.g. the one in my sig).
Nigeldg said:
MAGLDR requires HSPL2.08 which you would have realised if you read any one of the numerous guides available (e.g. the one in my sig).
Click to expand...
Click to collapse
or even sentence 4 of post 1 in the magldr thread, , , nice bold lettering.
Related
Since my HTC HD2 from Tmobile the SPL is 2.1
Is it possible to use a cooked rom without HSPL? Or is there another HSPL 2.1 hack.
Also, I searched the forum on downgrading it, which involves microsd. I'm not sure how to do it, anyone care to explain it to me? Thanks ^^
As long as you have one of these SPLs currently on the device - SPL 1.42.0000, SPL 1.62.0000, SPL 1.66.0000, SPL 2.07.0000, SPL 2.08.0000, SPL 2.10.000 you can flash HSPL3.
And you should always have hspl when flashing cooked ROMs
Dude I'm pretty sure there is no spl 2.1....
Sent from my HTC HD2 using XDA App
It's actually a 2.10.000
http://forum.xda-developers.com/showpost.php?p=6891358&postcount=1893
So I download HSPL3 and do it? Edit: For installing HSPL3, do I have to enter the tri color screen than do it or no? And also, is HSPL3 compatible with TMOBILE?
Also, how do I find out of it's a LEO512 or LEO1024? Like how does it know the HSPL is compatible with me HTC HD2 Tmoible? I know the SPL is 2.10.000
But I read that there is 3 different kind of Leo. So I dont know if it will be compatible
Edit: Let's say I bricked it, how would I enter boot loader?
Bump. need help ASAP ><
To confirm the instruction
1. Run HSPL3 (Do I have to be in the tri color screen in order to install it?)
2. Run the rom I want using CUSTOMRUU (It's a Miri HD2 WM6.5.X (23133) V18) (Do I have to be in the tri color screen? Or can I just plug in the phone and run the custom RUU?
3. After I flashed it, and I want to install Android on it, do I have to do anything about radio version or no? < I am asking this because on my current build, I hear robot voices... After I install the V18 everything should be fine and I don't have to worry about the radio right? Thanks again ^^
Bump! I really need help >< I really want Android on this phone and I keep hearing robot voice when calling..
I don't use the Miri ROM but I would search his thread for all instances of "Android" and see what other users are doing. Sorry I couldn't help more.
Dude... so there's a post in this section, actually one of the first ones in the area... stickyed close to the top (4th thread actually), that talks about EVERYTHING you just asked... and it's specificly for our 1024LEO (T-Mobile HD2)
give it a glance... it also provides the links to HSPL3 and instructions on how to install it.
I ran though this the 2nd day I had my T-Mobile HD2, first phone I've EVER customized, and it's all really straight forward & easy.... just be sure to RTFM
Also, as a bit of help....
when installing a ROM, the RUU will reboot the phone into the Tri-Color to perform the flash... however, if it's the first time the phone has been plugged into the computer while at the TRI-Color... the flash process will time out before the computer finishes installing the drivers required to see the device.... so I suggest going to the TRI-Color manually and pluging the phone into the computer... let the computer install the drivers (when finished, you will see the words change from SERIAL to USB in the white area of the Tri-Color screen) then run the ROM install. The RUU can be run both from the OS and from the Tri-Color
Oh, thanks!
Last question. Currently I have a official ROM from HTC, and when I boot up android, everything works fine except that when I make call I hear a robot voice.
Will flashing to custom rom fix this problem? Or do I have to update the radio? :|
nitrogen618 said:
Oh, thanks!
Last question. Currently I have a official ROM from HTC, and when I boot up android, everything works fine except that when I make call I hear a robot voice.
Will flashing to custom rom fix this problem? Or do I have to update the radio? :|
Click to expand...
Click to collapse
Official T-Mobile ROM? it's possible... both my Fiancee and I have the HD2, I flashed to the Energy ROM, and she used a kitchen and made a custom version of the T-Mobile ROM... when running Android mine works fine on voice, she however gets the robot...
we both flashed to the radio to Leo_Radio_2.12.50.02_2
I recall seeing something about formatting the SD card and trying again to fix the robot voice issue... but I would suggest doing some searches in the HD2 Android Development section first (found in the "other" HD2 section )... I know a lot of people were reporting that issue, so I'm sure someone has "The Fix" for it.
last bit... remember to ALWAYS check if a ROM is TMOUS supported before you flash... getting a ROM from this section is a safe bet (and i think a lot of the custom ROM cooks are starting to cook the Android loader in... I know the Energy ROMs have it) but when you start going to ROMs in the Android Development section made specifically for running Android you need to make sure.
Hi im using android from my sd card and i woud like to try nand as i never use winmo
so my question is, is my radio 2.12 compatible with magdlr and android from nand?
and i have HARDSPL 2
anyone? i need to know before i try something stupid and brick my phone
go ahead enjoy. any radio above 2.08 is ok..since you already have hspl, flash magldr 1.12 and then android, enjoy you have hspl, now its brick proof...go on
pakure said:
go ahead enjoy. any radio above 2.08 is ok..since you already have hspl, flash magldr 1.12 and then android, enjoy you have hspl, now its brick proof...go on
Click to expand...
Click to collapse
Nearly right - any radio above 2.08, but must be a .50 version, NOT a .51. Just be sure about that
my leo is a 512mb t8585 so im fine right?
Yes mate. You'll need to get HSPL installed in order to use magldr though. You can get that here...
http://forum.xda-developers.com/showthread.php?t=611433
See post 2 for HSPL3 (2.08)
i already have it HSPL2
radio version 2.12.50.02_2
and one more question in my contry somtimes the power goes of and if it does while installing android on nand any chance of brick?
metko said:
and one more question in my contry somtimes the power goes of and if it does while installing android on nand any chance of brick?
Click to expand...
Click to collapse
unlikely. most flashing errors that result in serious problems happen when the fail occurs whilst the spl or the radio portion are being flashed.
neither of these parts are flashed when flashing a nand rom, cos they're already set.
If a bad nand flash occurs, just go into bootloader/magldr and you should be able to flash again.
Changing radio, and flashing stock wm roms are the ones you wanna be carefull of. If your power is shakey, don't flash these too often.
ok thnx will try most likely mdj's cynanogen mod 7 today
BIG THNX to everyone i can not click thnx that many times
instaled MAGLDR1.12 then md'j cynanogen mod 7 2.3 gingerbread, i did al of this for about 10 min soo fast ,again thnx to everyone
Hey everyone, this is my first post.
So, i recently attempted to put magdlr and the android nand on my hd2. But when the dft application to get android gave me an error. I found out that it was my ROM that was the problem. So, I flashed my Rom and bricked it. I have a new hd2 today with
ROM version 3.14
Radio 2.15
I still want that android rom and I ask if anyone can give me step by step processes on how to get it?
silentdea said:
Hey everyone, this is my first post.
So, i recently attempted to put magdlr and the android nand on my hd2. But when the dft application to get android gave me an error. I found out that it was my ROM that was the problem. So, I flashed my Rom and bricked it. I have a new hd2 today with
ROM version 3.14
Radio 2.15
I still want that android rom and I ask if anyone can give me step by step processes on how to get it?
Click to expand...
Click to collapse
i
If you can get it to the bootloader tben it is not bricked. While the phone is ocf gold down the volume button and tap the power(end) button and the tri color bootloader should come up. let me know if you can do this and I will guide you further.
The phone won't turn on, charge, or even show a screen.
I can't go into bootloader, can't go into hard reset mode.
When I go into usb mode, all I see on my computer screen is something about Qualcomm. Nothing else, I can't even access the harddrive space.
I'm pretty sure its fully bricked.
the problem i have right now isn't returning the phone, I already have the phone in hand right now. The question i'm asking is..how do I put android nand on my phone right now? My ROM is the newest right now.
silentdea said:
The phone won't turn on, charge, or even show a screen.
I can't go into bootloader, can't go into hard reset mode.
When I go into usb mode, all I see on my computer screen is something about Qualcomm. Nothing else, I can't even access the harddrive space.
I'm pretty sure its fully bricked.
Click to expand...
Click to collapse
Oh yeah it is bricked then.
A few questions though. Do you have a T-Mobile HD2, I think you do. What exactly did you try to flash to it, I want spacifics like ROM name and Radio version. I ask this cause I garantee you that you flashed wrong radio version.
Using a JTAG and a ORT iz the only way to fix a bricked HD2. Go here to learn more.
silentdea said:
the problem i have right now isn't returning the phone, I already have the phone in hand right now. The question i'm asking is..how do I put android nand on my phone right now? My ROM is the newest right now.
Click to expand...
Click to collapse
So are you saying you have yhe replacement HD2 right now? A working HD2 I mean. if so I can help you out just need to know this fitst............I am a little confused lol.
lol sorry if I was being really unclear. I have a working replacement hd2 right now. I already sent T-mobile my bricked phone. I just want to know how to get android nand on my phone right now.
go to android section fro htc hd2 or search on youtube there is 1 million of tutorials
silentdea said:
lol sorry if I was being really unclear. I have a working replacement hd2 right now. I already sent T-mobile my bricked phone. I just want to know how to get android nand on my phone right now.
Click to expand...
Click to collapse
Ok no problem just download HSPL 3 or HSPL 4. Run wich ever one you download and install HSPL 2.08 as this is the highest HSPL that MAGLDR supports right now. Next download MAGLDR 1.13. Afteryou have both of these installed pick out a NAND Andriod ROM from here and follow the instructioms of the ROMs' developer to install it to your HD2 as there is two different ways to install now via computer and USB flash or via SD card flash. For a great dtep by step guide got to XDA member MSkip's guide it is a really good giude.
Hope tbis is what you are looking for
are you guys sure that hspling my phone to 2.08 is okay even if I have rom 3.14??
silentdea said:
are you guys sure that hspling my phone to 2.08 is okay even if I have rom 3.14??
Click to expand...
Click to collapse
Yes you are totally cool. Besides if you are going to flash a NAND Andriod ROM to your HD2 your Windows Mobile will be wiped from the phone and become a Andriod only device unless you flash something else to it.
The things you have to fear is flashing a non compatible radio for your HD2. Sense you have a TMOUS HD2 like me you have to make sure your radio is a TMOUS radio. Easiest way to do this is look at the third set of numbers. Example.
Radio version 2.15.50.14 Yes Radio version 2.07.51.22 No
Click to expand...
Click to collapse
As long as you have a 50 in that spot you are good with two exzemptions. Do not use radios that look like this.
2.04.50.xx or 2.05.50.xx They will brick your TMOUS HD2
Click to expand...
Click to collapse
so i have read here and there about how to put an android on my htc hd2. I decided to root my phone sometime this week and chose to follow :AmeriCanAndroid AOSP HD2 GB234 CM71|bkup2sdext234 [KERNEL:AmCanAndroid r516]. While following this guide, im under the impression that my radio and stuff wont automatically be flashed or am i wrong? Or will following the guide put my phone where it needs to be? Thanks for working with a noob appreciate it
sheikubaba said:
so i have read here and there about how to put an android on my htc hd2. I decided to root my phone sometime this week and chose to follow :AmeriCanAndroid AOSP HD2 GB234 CM71|bkup2sdext234 [KERNEL:AmCanAndroid r516]. While following this guide, im under the impression that my radio and stuff wont automatically be flashed or am i wrong? Or will following the guide put my phone where it needs to be? Thanks for working with a noob appreciate it
Click to expand...
Click to collapse
None of the Android ROMs will automatically flash a radio on your phone.
You have to manually do that using the radio thread. The "r" in the kernel name does not mean radio, it is just the revision number of the kernel so you can keep track of version.
Edit:
and FYI, American Android is an SD only ROM, which means you can actually run it without modifying anything on your phone and keeping it completely stock, you'd just have to launch it from WinMo first.
You can flash HSPL, MAGLDR, then run it from that (which means you would not have to load up WinMo first), but it is still not ever "flashed" to your phone, it is only run off the SD card.
alright understood thank you very much, so for that build i do not need to see which version of hspl i need as it does not require one. I would check which hspl i'd need if i wanted to auto book into android itself correct? anything else to worry about besides radio and hspl that i may have over looked?
sheikubaba said:
alright understood thank you very much, so for that build i do not need to see which version of hspl i need as it does not require one. I would check which hspl i'd need if i wanted to auto book into android itself correct? anything else to worry about besides radio and hspl that i may have over looked?
Click to expand...
Click to collapse
Nope,
Any questions on that ROM just ask in thread.
If you are running the latest WinMo ROM, then your radio is 12.15.50 and you are good to go, since that's the radio most custom ROM users use anyways.
your "SPL" (secondary program loader) will be stock and it does not matter. If you want to boot straight into Android from the bootloader, flash WP7, or flash Android to your internal storage, you will need to flash HSPL 2.08, which is very easy and takes a grand total of about 30 seconds.
Just check the HSPL thread in WinMo upgrades, use HSPL4 and flash version 2.08
hi guys i hvae flashed wp7 rom on hd2 tmo i have done every thing that is needed to run the wp7 but when ever i boot it stucks on htc logo boot screen please help
does any one has answer for it help guys i m waiting
Did you really follow everything step by step?
With the problem you describe, people usually forgot to flash the correct HSPL or Radio ROM.
It must be 2.08.HSPL and Radio ROM 2.15.50.xx, before installing MAGLDR 1.13.
Sometimes, incompatible SD cards make trouble, too.
tictac0566 said:
Did you really follow everything step by step?
With the problem you describe, people usually forgot to flash the correct HSPL or Radio ROM.
It must be 2.08.HSPL and Radio ROM 2.15.50.xx, before installing MAGLDR 1.13.
Sometimes, incompatible SD cards make trouble, too.
Click to expand...
Click to collapse
i tried but its still the same i tried flashing it with three diff memory card but it still stuck on htc boot screen
TMOUS?
If you've got the "other" (US 1024) HD2 you might have properly screwed your phone up
If you've got the European (512) non-TMOUS version then you've done something wrong on one of the steps. No more than pointers here though. You will have to search for yourself in the Development Pages.
1.HSPL
2.Correct Radio
3.MagLdr
4.ROM
In any case this Forum will help solve your issues.
stepthehen said:
If you've got the "other" (US 1024) HD2 you might have properly screwed your phone up
If you've got the European (512) non-TMOUS version then you've done something wrong on one of the steps. No more than pointers here though. You will have to search for yourself in the Development Pages.
1.HSPL
2.Correct Radio
3.MagLdr
4.ROM
In any case this Forum will help solve your issues.
Click to expand...
Click to collapse
i did every thing i m using tmo usa i did t9,hspl,correct radio,magldr,and try to install 3 roms all the roms stucking at boot screen i also tried to change the sd cards but still the same results i m try to solve it from past 3 days guys help me
Stickies
Read the stickies in development forum. I think you need seperate ROMs for TMOUS. Maybe also different HSPL, and MagLdr. I don't know what you flashed or what you should have flashed, so you need to read everything the people in the know have written.
Stuck on HTC screen as well!
I have tried it all!
Task 29, reinstall HSPL, reinstalled stock Winmo 6.5, reinstall MAGDLR 1.13, Radio 2.15, etc...
Stock 6.5 rom boots run fine.
Win 7 ROM install fine but then hangs on HTC screen forever! Been looking at it for 30 mins now!
This is highly annoying as everything was working fine last week!
Weirrrrrdddd.
Anybody got tips on this?
Peace.
This is on a EU HD2.
aesarius said:
I have tried it all!
Task 29, reinstall HSPL, reinstalled stock Winmo 6.5, reinstall MAGDLR 1.13, Radio 2.15, etc...
Stock 6.5 rom boots run fine.
Win 7 ROM install fine but then hangs on HTC screen forever! Been looking at it for 30 mins now!
This is highly annoying as everything was working fine last week!
Weirrrrrdddd.
Anybody got tips on this?
Peace.
This is on a EU HD2.
Click to expand...
Click to collapse
What version of HSPL did you install?
And about WP7, did you installed from the bootloader or MAGDLR USB Flash?
Hey @xsi!
Got 2.08.HSPL
Flashed WP7 through MAGDLR. Everything is going smooth, partitions ok but reboot stuck on HTC logo for ever!
Tried to reinstall Android through Clk no problems, Android boots fine and all, flashed WP7 through MAGDLR after but same thing happens!
Maybe a problem with Clk NAND partitions?
Cheers!
aesarius said:
Hey @xsi!
Got 2.08.HSPL
Flashed WP7 through MAGDLR. Everything is going smooth, partitions ok but reboot stuck on HTC logo for ever!
Tried to reinstall Android through Clk no problems, Android boots fine and all, flashed WP7 through MAGDLR after but same thing happens!
Maybe a problem with Clk NAND partitions?
Cheers!
Click to expand...
Click to collapse
No my friend i will go with sd card problem ... i had same problem it will stock at htc logo ... tried couple sd card 7 of them and i works with 1 gig sd card memory