link to the ROM on www.narod.ru. Type digit code, press "скачать", and have a link.
original post here.
If you have Android 2.2 on your phone:
1. Download the archive;
2. Create in the root of SD-card folder "dload";
3. Write to the new folder, all files from step1/dload (UPDATE.APP and UPDATE_g.APP);
4. Insert a memory card into the phone (if not already inserted) and pull out the battery;
5. Turn on the phone, holding down the volume up and down;
6. Once the firmware is installed, delete the folder dload all the files and write files from step2/dload;
7. Repeat the procedure for the folder step3/dload.
If you have Android 2.3 on your phone:
1. Download the archive;
2. Delete a file UPDATE.APP from folder step1/dload;
3. Rename a file UPDATE_g.APP to UPDATE.APP;
4. Create in the root of SD-card folder "dload";
5. Write to the new folder the renamed file UPDATE.APP from a folder step1/dload;
6. Insert a memory card into the phone (if not already inserted) and pull out the battery;
7. Turn on the phone, holding down the volume up and down;
8. Once the firmware is installed, delete the folder dload all the files and write files from step2/dload;
9. Repeat the procedure for the folder step3/dload.
* If any of the processes will not start - log-in and run the installation manual settings-memory-upgrade software.
* If some of the processes of updating the device hanging - wait 10 minutes then remove the battery. After 10 seconds, reinsert.
On my phone firmware write good. First run language is english, and you must manually configure APN.
any fixes???
Hi,
thank you very much for sharing this great news.
Anyway I would like to know if this new firmware is fixing the sdcard mount problem, the multitouch bug and the accelerometer.
Another thing: can you enter in pink screen mode with this new base-rom?
Regards,
kalo86
akalos said:
any fixes???
Click to expand...
Click to collapse
Unfortunately I no have information about any fixes.
Most likely, it`s the last firmware on 2.3, no more updates. OTA is not expected - install manually. About the ICS no any information yet.
First personal experience - a better camera and battery life. Still testing.
kalo86 said:
Hi,
Another thing: can you enter in pink screen mode with this new base-rom?
Regards,
kalo86
Click to expand...
Click to collapse
Yes, pink screen work normally. No have any mount, multitouch, accelerometer and proximity sensor problems yet.. little time has passed
FPS locked?
try neocore please
step 2 for what??
to large rom any way....
bobsido said:
Yes, pink screen work normally. No have any mount, multitouch, accelerometer and proximity sensor problems yet.. little time has passed
Click to expand...
Click to collapse
Thank you for the quick answer!
Since you are able to enter in pink screen mode, can you upload the original/stock boot.img?
I just extracted the rom from UPDATE_g.APP but I can only manage the system.img and the only way to extract the boot.img is the pink screen.
Thank you in advance!
akalos said:
FPS locked?
try neocore please
step 2 for what??
to large rom any way....
Click to expand...
Click to collapse
This is a clear original ROM, no patch or root. I make standard root procedure, it's work.
Sent from my U8800Pro using xda premium
kalo86 said:
Thank you for the quick answer!
Since you are able to enter in pink screen mode, can you upload the original/stock boot.img?
Click to expand...
Click to collapse
I do this tomorrow, too late
Sent from my U8800Pro using xda premium
B552 = B540 + Pink Screen Mode, nothing more
Ok, thank you always, but I flashed the update and copied the boot.img file through the pink screen.
The ROM has FPS limit and the compass mode in Google Maps Street View doesn't work, maybe with a reboot the compass mode will work fine.
The external sdcard is not correctly mounted after a full shutdown, so the bug persists still now.
The multitouch bug after the lockscreen is also in life...
Then I have a question: what did Huawei do on this new B552 base?
The only thing I see like a "news" is Google Music, nothing more.
I have a conclusion:
B552 = B540 + pink screen
Regards,
kalo86
downloading it now
tomorrow i will extract the zip and i will update to this stock firmware.
then i will copy the boot.img on my pc, i will extract the system.img from updata_g.app and i will cook the new version of my Countach
Hi Matteo,
yes, I did the same procedure, you can extract only system.img with dsixda kitchen, if you want boot.img you need to install with the dload folder procedure the original firmware and then put your U8800 Pro in pink screen mode.
If you trust in me, you can take my boot.img, it's the same of the original one but I only added root permission and init.d run-script.
Hoping to help, this is the file for you and other people:
kalo86 said:
Hi Matteo,
yes, I did the same procedure, you can extract only system.img with dsixda kitchen, if you want boot.img you need to install with the dload folder procedure the original firmware and then put your U8800 Pro in pink screen mode.
If you trust in me, you can take my boot.img, it's the same of the original one but I only added root permission and init.d run-script.
Hoping to help, this is the file for you and other people:
Click to expand...
Click to collapse
Thanks
Anyway i prefer to update to the official fw and then cook it because i want to analyse changes in this new fw.
Btw...i have looked for it on huawei site but i have not found it.
Inviato dal mio U8800Pro usando Tapatalk
recovery mode?
i just can't,volume +,power do nothing,after change recovery img with CWM Recovery 5.0.2.7
akalos said:
recovery mode?
i just can't,volume +,power do nothing,after change recovery img with CWM Recovery 5.0.2.7
Click to expand...
Click to collapse
just now replaces the original recovery.img file with attached, everything works fine, without any problems.
is ROOT for this ROM?
Just trying, but have many problems with install.
Format you sd card with windows 7 . FAT32.
SD formater is not working good for me.
just installed this official update. it is really similar to the B512 and B540.
already extracted boot.img and system.img, i have already cooked the Countach RC1. i will upload it tomorrow.
Ramucio said:
is ROOT for this ROM?
Just trying, but have many problems with install.
Format you sd card with windows 7 . FAT32.
SD formater is not working good for me.
Click to expand...
Click to collapse
Standard root:
1. Go to pink screen.
2. Replace original boot.img with patched, save original.
3. Reboot, wait when phone fully load .
4. Go to pink screen again and recover original boot.img, reboot.
5. When phone load wipe factory settings.
6. Done, your phone rooted.
For me it's work without problem.
Sent from my U8800Pro using xda premium
pure
on SD card make directory named "dload"
copy the UPDATE_g.APP into (approx 370 MB)
rename the UPDATE_g.APP to UPDATE.APP
update via SD card update (no pinkscreen), but if you want, use pinkscreen, it is the same
immediately after first reboot, pull out the battery, insert the batt. go to pinkscreen, delete the ****ty cust.img, reboot and continue with installation.
you will get pure gingerbread without any customizations (yes, there is the huawei launcher and beyond the sky theme, i like it)
for root, oc, use geno´s boot.img, for HDR edit the build.prop
if you like huawei´s boot animation, copy it to system/media folder (files bootanimation.zip and bootanimationex.zip)
step 2 and step 3 is not needed
Missed call problem exist? When someone want's to call he heards that you are unavailable/not on network or the phone is turned off.
Sent from my ragelis
Related
trying to find U8800 V100R001C00B136SP02CUSTC205D001 (Finland Elisa)
to download no links on huawei homepage works so.
need .zip file found a rar but says (bad) when i try to install
getting black screen after my SIM-card provider image dissapears.
thanks in advance
You've got a PM >
Remember, you CANNOT install the stock Roms from within the recovery.
To install a stock ROM, all you have to do is:
- Create a folder on the SD card named "dload"
- Get the contents (usually 2 big files) of the stock Rom archive and place them on the "dload" folder.
- Switch off the phone and press Vol+, Vol- and Power.
The stock Rom installation is automatic and you don't have to do anything during installation.
oh ok, good to know.
problem solved already tried to install older version of miui. the new version was messing with my phone nothing worked with it.
thanks anyway saving this for the future <3 !
katu2006 said:
You've got a PM >
Remember, you CANNOT install the stock Roms from within the recovery.
To install a stock ROM, all you have to do is:
- Create a folder on the SD card named "dload"
- Get the contents (usually 2 big files) of the stock Rom archive and place them on the "dload" folder.
- Switch off the phone and press Vol+, Vol- and Power.
The stock Rom installation is automatic and you don't have to do anything during installation.
Click to expand...
Click to collapse
Where can i find this rom archive? I'd like to have a rom backup of my phone U8800 V100R001C00B135SP01CUSTNLDC253D001 (The Netherlands) before i flash anything. Is this the latest stock rom for my country? If i would resize data will this be a problem when restoring the stock rom?
morgoth12 said:
Where can i find this rom archive? I'd like to have a rom backup of my phone U8800 V100R001C00B135SP01CUSTNLDC253D001 (The Netherlands) before i flash anything. Is this the latest stock rom for my country? If i would resize data will this be a problem when restoring the stock rom?
Click to expand...
Click to collapse
I would advise against resizing the partitions, as it's difficult to restore them in case you need the phone for warranty.
I've sent you a PM with some info, let me know if you need more.
Hi ...
I have a big problem , my device does not work !
I wanted to install the new ICS 4.0.3 from here (http://forum.xda-developers.com/showthread.php?t=1475687) so I have I installed ClockworkMod 5.5.0.4 (from hear) on my IDEOS x5 , kernel : 2.6.23.9-perf
But after it finish installing the system and restart the phone , start up interface taking a lot of time then reboots itself, restart , restart ....
And tried to restore my old recovery.img , it is recovered successfully but when I reboot it ,
it still reboots itself !
Please help me !
(I am sorry because my English is weak)
Sorry , my kernel version is : 2.6.32.9
From my cwm thread and Aurora ICS, it's said that you have to update your phone to 2.3 first (B517-B526). It does not work on old ROMs.
Sent from my U8800
my god ,you need update the 35 kernel ,then install the ICS 4.0.3 . now try the huawei's 2.2 rom .
Thanks guys !
so , how can I update my kernel to .35 ?
I've downloaded this file ( fileserve. com/file/MJ65g2c )
Please help me , I am waiting .....
Ahmad Ramadan said:
Please help me , I am waiting .....
Click to expand...
Click to collapse
Can you access to your phones internal memory? if you can, put dload folder there. If you cant, just put dload folder to sdcard. Then boot your phone while holding both volume buttons down. Your phone should start updatng after it. when it's ready, your on .35 kernel.
julle131 said:
Can you access to your phones internal memory? if you can, put dload folder there. If you cant, just put dload folder to sdcard. Then boot your phone while holding both volume buttons down. Your phone should start updatng after it. when it's ready, your on .35 kernel.
Click to expand...
Click to collapse
Did you mean the folder "dload", which exists in this file (fileserve. com/file/MJ65g2c)?
and after installing it , what should I do to get good ICS 4.0.3 ROM (support Arabic Language) ?
Ahmad Ramadan said:
Did you mean the folder "X", which exists in this file (fileserve. com/file/MJ65g2c)?
and after installing it , what should I do to get good ICS 4.0.3 ROM (support Arabic Language) ?
Click to expand...
Click to collapse
What is inside in this "x" folder? If there is update.app, then create dload folder to sdcard and put the file there.
Sent from my Derp using XDA Herp
julle131 said:
What is inside in this "x" folder? If there is update.app, then create dload folder to sdcard and put the file there.
Sent from my Derp using XDA Herp
Click to expand...
Click to collapse
correction : Did you mean the folder "dload", which exists in this file (fileserve. com/file/MJ65g2c)?
and after installing it , what should I do to get good ICS 4.0.3 ROM (support Arabic Language) ?
Once you have put the dload folder on, followed instructions to upgrade in previous posts, then follow this thread to put CWM on and install ICS:
http://forum.xda-developers.com/showthread.php?t=1420728
PaulMilbank said:
Once you have put the dload folder on, followed instructions to upgrade in previous posts, then follow this thread to put CWM on and install ICS:
http://forum.xda-developers.com/showthread.php?t=1420728
Click to expand...
Click to collapse
Thanks , Can you tell me good ics room without problems to install it on my device ?
Aurora ics by Dzo is the only choise. Others are far behind it.
Sent from my Derp using XDA Herp
YOU MUST BE ON OFFICIAL GB FOR THIS TO WORK!!!
1)download official 4.0 ics from huawei website. you can find the link here :http://www.huaweidevice.com/worldwi...=toDownloadFile&flay=software&softid=NDY1NTY=
2)format your sd card. i recommend using a 4gb one.
3)extract rar file you downloaded.
4)go to folder step one. inside it you will find a folder named dload.copy that folder.
5)turn off your device.
6)paste the dload folder you just copied to you root of sd card.
7)make sure you have only the dload folder in your sd card.
8)put the sd card in your device and then press power button and volume + and volume -
9)you should see the updating and then update complete. then pull of your battery.
10)format the sd card again and repeat the steps with dload folder that can be found in folder step 2 from the 4.0 ics you download and extracted.
11)when done all three updates unlock pink screen(instructions can be found here: http://forum.xda-developers.com/showthread.php?t=1736650 )
12)download recovery by ivan that can be found here : http://forum.xda-developers.com/showthread.php?t=1948309 .
13)delete dload folder from sd card if you still have it there.turn off your device.
14)press power button and vol + and vol -. the pink screen should come up then.
15)connect your phone to the pc.
16) install drivers and open the folder image that will come up.
17)inside folder image you will find a recovery.img file. then rename the recoveryivan.img you downloaded to recovery.img and replace the existing one in image folder with it.
18)download a CM10 ROM (mauro,gadana,frozenpika or the one by ivan.)
19)place the rar file of CM10 to your sd card and make sure device is off.
20)press vol+ and power button and recovery should come up.
21)do all 4 wipes.(battery stats wipe, cache partition wipe, data wipe, dalvik cache wipe)
22)then click install from sd card and you are done
Happy Flashing!
i have also made a fix to the panorama here : http://forum.xda-developers.com/showthread.php?t=1951481&page=15
staca said:
YOU MUST BE ON OFFICIAL GB FOR THIS TO WORK!!!
1)download official 4.0 ics from huawei website. you can find the link here :http://www.huaweidevice.com/worldwid...oftid=NDY1NTY=
2)format your sd card. i recommend using a 4gb one.
3)extract rar file you downloaded.
4)go to folder step one. inside it you will find a folder named dload.copy that folder.
5)turn off your device.
6)paste the dload folder you just copied to you root of sd card.
7)make sure you have only the dload folder in your sd card.
8)put the sd card in your device and then press power button and volume + and volume -
9)you should see the updating and then update complete. then pull of your battery.
10)format the sd card again and repeat the steps with dload folder that can be found in folder step 2 from the 4.0 ics you download and extracted.
11)when done all three updates unlock pink screen(instructions can be found here: http://forum.xda-developers.com/show....php?t=1736650 )
12)download recovery by ivan that can be found here : http://forum.xda-developers.com/show....php?t=1948309.
13)delete dload folder from sd card if you still have it there.turn off your device.
14)press power button and vol + and vol -. the pink screen should come up then.
15)connect your phone to the pc.
16) install drivers and open the folder image that will come up.
17)inside folder image you will find a recovery.img file. then rename the recoveryivan.img you downloaded to recovery.img and replace the existing one in image folder with it.
18)download a CM10 ROM (mauro,gadana,frozenpika or the one by ivan.)
19)place the rar file of CM10 to your sd card and make sure device is off.
20)press vol+ and power button and recovery should come up.
21)do all 4 wipes.
22)then click install from sd card and you are done
Happy Flashing!
i have also made a fix to the panorama here : http://forum.xda-developers.com/showthread.php?t=1951481&page=15
Click to expand...
Click to collapse
this guide works for U8800-51?
cesarparra27 said:
this guide works for U8800-51?
Click to expand...
Click to collapse
No, the U8800-51 is more complicated and I will eventually make a guide.
Somcom3X said:
No, the U8800-51 is more complicated and I will eventually make a guide.
thanks for the work
I will look to this publication
Click to expand...
Click to collapse
Thread Cleaned
Show some respect for this users efforts! if anybody feels something is in the wrong place, please report it for the moderation teams attention, we will make the decision.
Download link in step 1 is invalid?
Sokko said:
Download link in step 1 is invalid?
Click to expand...
Click to collapse
Well here is the link, unless you got it downloaded link
OP the links are not working except for the last one can you fix them please? Kindly also be more elaborative e.g. what does do all 4 wipes mean etc.
nayneshdev said:
OP the links are not working except for the last one can you fix them please? Kindly also be more elaborative e.g. what does do all 4 wipes mean etc.
Click to expand...
Click to collapse
ok done.
Where can I find an Official GB 2.3.5 rom?
PLease help,,,
Thanks ^^
Edited: I've found it
Thanks anyway ^^
Somcom3X said:
No, the U8800-51 is more complicated and I will eventually make a guide.
Click to expand...
Click to collapse
Thank for all the work, I am still eagerly waiting for U8800-51 CM10 installation guide
an.dro.id said:
Thank for all the work, I am still eagerly waiting for U8800-51 CM10 installation guide
Click to expand...
Click to collapse
Eager hmmm. It has a 17kb/s WiFi problems
Sent from my U8800-51 using xda premium
Sir, I Need a Internal Image files(From PINK SCREEN) If you have rom used base B526, please upload it sir, i very need that all files,bcoz with old amss from b526 my X5 can be boot normally, can be shutdown normally. Now i'm using OLD (if it corrects, i see in the thread it's image files from B160, i think that's not compatible with B526 Image) before i do update from external sd card, it was a word "Unpacking blablabla" but after changing the amss and the other, it's looks like this http://www.7ayak.com/up/uploads/13425105111.jpg
so please help me sir, without all of you, my x5 can't be turned on like a normal x5, just reboot, reboot, and reboot every 1-3 minutes
Check my mega drive (signature), you should be able to find them.
Sent from my U8800
Blefish said:
Check my mega drive (signature), you should be able to find them.
Sent from my U8800
Click to expand...
Click to collapse
Ya sir i have download it before. But it didn't work sir, changing the amss and other files still got reboot automatically (in 1-5 mins my X5 will get autoreboot)
I have do partition before about 1GB SD and 1.4GB APP, but i need to install a stock rom, never get completed, always get at 1/2 and failed (no words says 'update blablalba'
When i install a stock partition, never successfull. hmm, after i click emmc unlock boot for my friend l7 , my phone turns like that sir . vie my thread before for details . i have go to huawei centre, but they ask me to pay Rp.2.000.000 for changing the engine inside (WTF! I Have buy it only Rp.1.600.000) :crying:
i see my x5 partition via minitool partition wizard , see that picture sir, are my X5 internal partition was bad or it's okay ?
Blefish said:
Check my mega drive (signature), you should be able to find them.
Sent from my U8800
Click to expand...
Click to collapse
Just need to know something Blefish. In your mega drive, under Cust Partition, there are two files: hw-cust_data.zip and elisa-cust_data.zip. What are these files for?
I think they are both for custom partitioning the data, and none of them return you to stock partition. I think what the OP has done is accidentally flash one of them, and then flash the second one as well. Which has caused his partitions to be messed up.
But, please kindly confirm what these files are for?
Thanks.
Blefish, i've downloaded B526 Image files from your mega, but i think its not correct amss.mbn for B526, it size same as i downloaded before (23,5mb) before i replacing the amss, my amss original size upper than 23mb and my phone never get reboot automatically
rqmok said:
Just need to know something Blefish. In your mega drive, under Cust Partition, there are two files: hw-cust_data.zip and elisa-cust_data.zip. What are these files for?
I think they are both for custom partitioning the data, and none of them return you to stock partition. I think what the OP has done is accidentally flash one of them, and then flash the second one as well. Which has caused his partitions to be messed up.
But, please kindly confirm what these files are for?
Thanks.
Click to expand...
Click to collapse
Sir, i think my phone always get auto reboot its not causing by the partition. first time i got the problem in my other thread is my x5 working like normal but my x5 can;t detect a simcard, and now it can (i'm not fixing it, just maybe it has fixed by itself ) . but my stupid i do change the amss.mbn , before i got amss.mbn size is more than 23,5mb sir
So, the problem may causing my phone auto reboot is need to change the correct amss from the base B526
If someone can't upload the amss, i need to unpack update.app based on B526 and find the amss.mbn . but i don't know how to
rqmok said:
Just need to know something Blefish. In your mega drive, under Cust Partition, there are two files: hw-cust_data.zip and elisa-cust_data.zip. What are these files for?
I think they are both for custom partitioning the data, and none of them return you to stock partition. I think what the OP has done is accidentally flash one of them, and then flash the second one as well. Which has caused his partitions to be messed up.
But, please kindly confirm what these files are for?
Thanks.
Click to expand...
Click to collapse
Under cust/image, there is also cust_data folder. This is not really used in the 2.3 I believe, but it contains some carrier specific bits to Android. Not really necessary though.
VickySullivan said:
Blefish, i've downloaded B526 Image files from your mega, but i think its not correct amss.mbn for B526, it size same as i downloaded before (23,5mb) before i replacing the amss, my amss original size upper than 23mb and my phone never get reboot automatically
Click to expand...
Click to collapse
The B528, B526 all use the B522 amss if I am not mistaken, so there is no difference.
Blefish said:
Under cust/image, there is also cust_data folder. This is not really used in the 2.3 I believe, but it contains some carrier specific bits to Android. Not really necessary though.
The B528, B526 all use the B522 amss if I am not mistaken, so there is no difference.
Click to expand...
Click to collapse
Maybe
*Update
Now i repartitioning the system again with minitool partition wizard
- Ext 3 (system ) : 220mB
- Ext 3 (app) : 700mB+
- U8800-MMC (SD Internal) : 1.9gB
But when i trying to install stock rom, it always fails
I have more fun with my x5 since my x5 goes like a crazy phone
*It's same as before, gets auto reboot.
*I Have changed the Date and Time, but after my phone auto reboot IT'S DATE BACK AGAIN TO JAUNARY 1980 and TIME BACK TO THE 07:00 AGAIN , WHEN I NOT CHANGE IT, THE TIME WILL WORK ONLY ON 07:00 AND UO, Whats wrong with my phone sir>?
Always restart and restart. did u know what is the problem sir ?>
Hi!
i hope this help you!
You have a phone locked to a provider, like Vodafone, etc, etc and you had installed a ROM that give you the BalongC**B*** issue in build number insted of of the rom build number is because your vendor is missing in that rom and your installation is not completed!!!
Is easy to fix it, you need to have Huawei recovery, doesn´t work with TWRP, just extract the dload folder to your sd card from this zip bellow and install like a default ROM, this will change your vendor to hw/eu, the vendor that came in provider free ROMs!
Just do a factory resete after flash! :fingers-crossed:
how im supposed to instal it? i dont know , help pls
zaszas said:
how im supposed to instal it? i dont know , help pls
Click to expand...
Click to collapse
Download the file
Reboot into TWRP recovery
Tap install
Find the file you just downloaded normally in Download folder select it
Swipe
Wait for finish
Reboot into system
ndg_2000 said:
Download the file
Reboot into TWRP recovery
Tap install
Find the file you just downloaded normally in Download folder select it
Swipe
Wait for finish
Reboot into system
Click to expand...
Click to collapse
right up top it says that it wont work with twrp
zaszas said:
right up top it says that it wont work with twrp
Click to expand...
Click to collapse
Sorry my bad
Download the file to your device
Unzip to a new folder named Dload in the root / of your SD card or the internal memory
Switch off phone
Restart to huawei recovery power and volume up
It should automatically detect file and flash
ndg_2000 said:
Sorry my bad
Download the file to your device
Unzip to a new folder named Dload in the root / of your SD card or the internal memory
Switch off phone
Restart to huawei recovery power and volume up
It should automatically detect file and flash
Click to expand...
Click to collapse
it give me " sofware install failed" ..
zaszas said:
it give me " sofware install failed" ..
Click to expand...
Click to collapse
Try renaming folder to DLOAD
It's not working.
Hello, i'm having the same problem, like zaszas, it won't install, dosen't matter how i rename the folder..any ideas?
why I can't install by usig twrp?