[Q] Problem on start up ! [ClockworkMod 5.5.0.4] - Huawei Ideos X5 U8800

Hi ...
I have a big problem , my device does not work !
I wanted to install the new ICS 4.0.3 from here (http://forum.xda-developers.com/showthread.php?t=1475687) so I have I installed ClockworkMod 5.5.0.4 (from hear) on my IDEOS x5 , kernel : 2.6.23.9-perf
But after it finish installing the system and restart the phone , start up interface taking a lot of time then reboots itself, restart , restart ....
And tried to restore my old recovery.img , it is recovered successfully but when I reboot it ,
it still reboots itself !
Please help me !
(I am sorry because my English is weak)

Sorry , my kernel version is : 2.6.32.9

From my cwm thread and Aurora ICS, it's said that you have to update your phone to 2.3 first (B517-B526). It does not work on old ROMs.
Sent from my U8800

my god ,you need update the 35 kernel ,then install the ICS 4.0.3 . now try the huawei's 2.2 rom .

Thanks guys !
so , how can I update my kernel to .35 ?

I've downloaded this file ( fileserve. com/file/MJ65g2c )

Please help me , I am waiting .....

Ahmad Ramadan said:
Please help me , I am waiting .....
Click to expand...
Click to collapse
Can you access to your phones internal memory? if you can, put dload folder there. If you cant, just put dload folder to sdcard. Then boot your phone while holding both volume buttons down. Your phone should start updatng after it. when it's ready, your on .35 kernel.

julle131 said:
Can you access to your phones internal memory? if you can, put dload folder there. If you cant, just put dload folder to sdcard. Then boot your phone while holding both volume buttons down. Your phone should start updatng after it. when it's ready, your on .35 kernel.
Click to expand...
Click to collapse
Did you mean the folder "dload", which exists in this file (fileserve. com/file/MJ65g2c)?
and after installing it , what should I do to get good ICS 4.0.3 ROM (support Arabic Language) ?

Ahmad Ramadan said:
Did you mean the folder "X", which exists in this file (fileserve. com/file/MJ65g2c)?
and after installing it , what should I do to get good ICS 4.0.3 ROM (support Arabic Language) ?
Click to expand...
Click to collapse
What is inside in this "x" folder? If there is update.app, then create dload folder to sdcard and put the file there.
Sent from my Derp using XDA Herp

julle131 said:
What is inside in this "x" folder? If there is update.app, then create dload folder to sdcard and put the file there.
Sent from my Derp using XDA Herp
Click to expand...
Click to collapse
correction : Did you mean the folder "dload", which exists in this file (fileserve. com/file/MJ65g2c)?
and after installing it , what should I do to get good ICS 4.0.3 ROM (support Arabic Language) ?

Once you have put the dload folder on, followed instructions to upgrade in previous posts, then follow this thread to put CWM on and install ICS:
http://forum.xda-developers.com/showthread.php?t=1420728

PaulMilbank said:
Once you have put the dload folder on, followed instructions to upgrade in previous posts, then follow this thread to put CWM on and install ICS:
http://forum.xda-developers.com/showthread.php?t=1420728
Click to expand...
Click to collapse
Thanks , Can you tell me good ics room without problems to install it on my device ?

Aurora ics by Dzo is the only choise. Others are far behind it.
Sent from my Derp using XDA Herp

Related

Urukdroid install problem: please transfer proper installation file

I'm trying to install the Urukdroid but is not going well , the last step transfer the Urukdroid 1.0 installation framework and pressing the power ..after that getting the error file of a corrupt or wrong file and the device is asking for another transfer "please transfer proper installation file" ..what can be wrong , I did downloaded the file many times from different file locations?
Hope someone knows the solution
Thanks
paterdamiaan said:
I'm trying to install the Urukdroid but is not going well , the last step transfer the Urukdroid 1.0 installation framework and pressing the power ..after that getting the error file of a corrupt or wrong file and the device is asking for another transfer "please transfer proper installation file" ..what can be wrong , I did downloaded the file many times from different file locations?
Hope someone knows the solution
Thanks
Click to expand...
Click to collapse
Hey,
Did you extracted the installation file out of the downloaded zip file?
Inside the downloaded file there is a archive file again (forgot what format), this file you have to extract out and copy that file onto your archos
Good luck!
Lenn said:
Hey,
Did you extracted the installation file out of the downloaded zip file?
Inside the downloaded file there is a archive file again (forgot what format), this file you have to extract out and copy that file onto your archos
Good luck!
Click to expand...
Click to collapse
Yes , thats the thing I did , file named UrukDroid-install.tgz copied to the device like it written in the installation procedure ....no need to unzip that one also
Try to download this file:
http://sauron.pourix.com/UrukDroid/UrukDroid-1.0/EI/UrukDroid-install.tgz
It is directly and no need to extract any more.. maybe your archive manager does something wrong..
Lenn said:
Try to download this file:
http://sauron.pourix.com/UrukDroid/UrukDroid-1.0/EI/UrukDroid-install.tgz
It is directly and no need to extract any more.. maybe your archive manager does something wrong..
Click to expand...
Click to collapse
Lenn same thing ...please transfer proper installation file , and ask for another transfer
paterdamiaan said:
Lenn same thing ...please transfer proper installation file , and ask for another transfer
Click to expand...
Click to collapse
drives me crazy ... ..the very last phase is going wrong ..so close....
Okey... me too
Maybe tjeres something wrong with the kernel
Download the zImage and the initramfs as single files from here:
http://sauron.pourix.com/UrukDroid/UrukDroid-1.0/EI/
Then flash the kernel again, like you did it before (via the recovery menu)
After try the installation with the as single file downloaded installation file
Lenn said:
Okey... me too
Maybe tjeres something wrong with the kernel
Download the zImage and the initramfs as single files from here:
http://sauron.pourix.com/UrukDroid/UrukDroid-1.0/EI/
Then flash the kernel again, like you did it before (via the recovery menu)
After try the installation with the as single file downloaded installation file
Click to expand...
Click to collapse
Lenn, this is different , another problem ...after flashing the kernel with the "let's say " new files , what is going fast then going into the developer menu ..archos needs to reboot in that menu and I should get UrukDroid 1.0 Installation framework and select simple installation ..but does not get to that boot ....the original archos kernel completely starts up .
Let me know tomorrow ....we need some sleep being busy with this whole day
I wanted to thank you for the given support for now ..hope someone will know the answer
paterdamiaan said:
Lenn, this is different , another problem ...after flashing the kernel with the "let's say " new files , what is going fast then going into the developer menu ..archos needs to reboot in that menu and I should get UrukDroid 1.0 Installation framework and select simple installation ..but does not get to that boot ....the original archos kernel completely starts up .
Let me know tomorrow ....we need some sleep being busy with this whole day
I wanted to thank you for the given support for now ..hope someone will know the answer
Click to expand...
Click to collapse
Lenn , any new ideas about a solution since yesterday ?
paterdamiaan said:
Lenn , any new ideas about a solution since yesterday ?
Click to expand...
Click to collapse
I may didnt uhderstand you right,but:
Did you boot into the Developer Edition after flashing the new kernel?
You have to, urukdroid is the "new" SDE after the installation
Lenn said:
I may didnt uhderstand you right,but:
Did you boot into the Developer Edition after flashing the new kernel?
You have to, urukdroid is the "new" SDE after the installation
Click to expand...
Click to collapse
Lenn, the files you send me separately did not worked at all , same problem as before invalid file . Flashing the kernel is working , the install zip file Urukdroid transfer at the very last step still gives invalid file ans ask for re-sending a correct file , no matter what I do no file seems to be ok
paterdamiaan said:
Lenn, the files you send me separately did not worked at all , same problem as before invalid file . Flashing the kernel is working , the install zip file Urukdroid transfer at the very last step still gives invalid file ans ask for re-sending a correct file , no matter what I do no file seems to be ok
Click to expand...
Click to collapse
... unfortunality i have no idea atm....
Maybe your disk has a failure... try to completly wipe your archos again install the newest archos firmware directly after the update and try it again...
Sorry, i think but i dont see any solution yet...
paterdamiaan said:
Lenn, the files you send me separately did not worked at all , same problem as before invalid file . Flashing the kernel is working , the install zip file Urukdroid transfer at the very last step still gives invalid file ans ask for re-sending a correct file , no matter what I do no file seems to be ok
Click to expand...
Click to collapse
recap
Flash initramfs.cpio.gz and zImage from SDE boot menu is working fine
after going into
Boot to SDE:
power on (2) Archos, hold up/+ volume key (1) until you see "Archos AXXXX - Boot Menu",
choose "Developer edition" is also working
You should see "UrukDroid 1.0 Installation framework" title. Please choose simple install method. is working well
When asked to, connect Archos to PC (5) once again and copy UrukDroid-install.tgz,
This step is working...transfert can be done
disconnect Archos from PC properly (umount, safely remove device etc.) and press power button (2)
at this point the device saying that there is an invalid file
Try it with advanced install
Choose the recommended values (on the top) but also select that you want to format the partitions and create new ones
Lenn said:
Try it with advanced install
Choose the recommended values (on the top) but also select that you want to format the partitions and create new ones
Click to expand...
Click to collapse
Hmmm tried that already many times , i will give that another try and let you now
paterdamiaan said:
Hmmm tried that already many times , i will give that another try and let you now
Click to expand...
Click to collapse
lenn, did the advanced install , on SD , 512 rootfs ,and 1.5 g for data
Format of all partitions went ok , the transfer of the 140,3 meg file to install ok until the step to press power button once to start the install ..again the invalid file error message
just thinking could it be something with the sd card ?
paterdamiaan said:
lenn, did the advanced install , on SD , 512 rootfs ,and 1.5 g for data
Format of all partitions went ok , the transfer of the 140,3 meg file to install ok until the step to press power button once to start the install ..again the invalid file error message
just thinking could it be something with the sd card ?
Click to expand...
Click to collapse
Aah you installed it on a external sd card?
if yes please give some informations about it (size,speed,class,...)
Lenn said:
Aah you installed it on a external sd card?
if yes please give some informations about it (size,speed,class,...)[/QUO
kingston 32 GB sdc n0214-001 made in taiwan off course
Just one question , if i have choosen most of the time the simple install ..is the Urukdroid also installing on the SD Card?
Can I choose to install on the memory of the archos?
Click to expand...
Click to collapse
paterdamiaan said:
Lenn said:
Aah you installed it on a external sd card?
if yes please give some informations about it (size,speed,class,...)[/QUO
kingston 32 GB sdc n0214-001 made in taiwan off course
Just one question , if i have choosen most of the time the simple install ..is the Urukdroid also installing on the SD Card?
Can I choose to install on the memory of the archos?
Click to expand...
Click to collapse
Lenn, I have choosen for an install on internal memory , now it is working !!!!!!!!!!!!
where can I find the Urukdroid 1.5 ?
Click to expand...
Click to collapse
paterdamiaan said:
Lenn said:
Aah you installed it on a external sd card?
if yes please give some informations about it (size,speed,class,...)
Click to expand...
Click to collapse
kingston 32 GB sdc n0214-001 made in taiwan off course
Just one question , if i have choosen most of the time the simple install ..is the Urukdroid also installing on the SD Card?
Can I choose to install on the memory of the archos?
Click to expand...
Click to collapse
Maybe the sd card is to big for urukdroid... and the sd card have to be formatted to fat32 ad have to be clear..
Normally urukdroid installs on external sd card
You can in the advanced install method

stock rom help!

trying to find U8800 V100R001C00B136SP02CUSTC205D001 (Finland Elisa)
to download no links on huawei homepage works so.
need .zip file found a rar but says (bad) when i try to install
getting black screen after my SIM-card provider image dissapears.
thanks in advance
You've got a PM >
Remember, you CANNOT install the stock Roms from within the recovery.
To install a stock ROM, all you have to do is:
- Create a folder on the SD card named "dload"
- Get the contents (usually 2 big files) of the stock Rom archive and place them on the "dload" folder.
- Switch off the phone and press Vol+, Vol- and Power.
The stock Rom installation is automatic and you don't have to do anything during installation.
oh ok, good to know.
problem solved already tried to install older version of miui. the new version was messing with my phone nothing worked with it.
thanks anyway saving this for the future <3 !
katu2006 said:
You've got a PM >
Remember, you CANNOT install the stock Roms from within the recovery.
To install a stock ROM, all you have to do is:
- Create a folder on the SD card named "dload"
- Get the contents (usually 2 big files) of the stock Rom archive and place them on the "dload" folder.
- Switch off the phone and press Vol+, Vol- and Power.
The stock Rom installation is automatic and you don't have to do anything during installation.
Click to expand...
Click to collapse
Where can i find this rom archive? I'd like to have a rom backup of my phone U8800 V100R001C00B135SP01CUSTNLDC253D001 (The Netherlands) before i flash anything. Is this the latest stock rom for my country? If i would resize data will this be a problem when restoring the stock rom?
morgoth12 said:
Where can i find this rom archive? I'd like to have a rom backup of my phone U8800 V100R001C00B135SP01CUSTNLDC253D001 (The Netherlands) before i flash anything. Is this the latest stock rom for my country? If i would resize data will this be a problem when restoring the stock rom?
Click to expand...
Click to collapse
I would advise against resizing the partitions, as it's difficult to restore them in case you need the phone for warranty.
I've sent you a PM with some info, let me know if you need more.

U8800Pro - Last russian ROM 2.3 (1C00B552CUSTC10D001) 2.6.35 kernel

link to the ROM on www.narod.ru. Type digit code, press "скачать", and have a link.
original post here.
If you have Android 2.2 on your phone:
1. Download the archive;
2. Create in the root of SD-card folder "dload";
3. Write to the new folder, all files from step1/dload (UPDATE.APP and UPDATE_g.APP);
4. Insert a memory card into the phone (if not already inserted) and pull out the battery;
5. Turn on the phone, holding down the volume up and down;
6. Once the firmware is installed, delete the folder dload all the files and write files from step2/dload;
7. Repeat the procedure for the folder step3/dload.
If you have Android 2.3 on your phone:
1. Download the archive;
2. Delete a file UPDATE.APP from folder step1/dload;
3. Rename a file UPDATE_g.APP to UPDATE.APP;
4. Create in the root of SD-card folder "dload";
5. Write to the new folder the renamed file UPDATE.APP from a folder step1/dload;
6. Insert a memory card into the phone (if not already inserted) and pull out the battery;
7. Turn on the phone, holding down the volume up and down;
8. Once the firmware is installed, delete the folder dload all the files and write files from step2/dload;
9. Repeat the procedure for the folder step3/dload.
* If any of the processes will not start - log-in and run the installation manual settings-memory-upgrade software.
* If some of the processes of updating the device hanging - wait 10 minutes then remove the battery. After 10 seconds, reinsert.
On my phone firmware write good. First run language is english, and you must manually configure APN.
any fixes???
Hi,
thank you very much for sharing this great news.
Anyway I would like to know if this new firmware is fixing the sdcard mount problem, the multitouch bug and the accelerometer.
Another thing: can you enter in pink screen mode with this new base-rom?
Regards,
kalo86
akalos said:
any fixes???
Click to expand...
Click to collapse
Unfortunately I no have information about any fixes.
Most likely, it`s the last firmware on 2.3, no more updates. OTA is not expected - install manually. About the ICS no any information yet.
First personal experience - a better camera and battery life. Still testing.
kalo86 said:
Hi,
Another thing: can you enter in pink screen mode with this new base-rom?
Regards,
kalo86
Click to expand...
Click to collapse
Yes, pink screen work normally. No have any mount, multitouch, accelerometer and proximity sensor problems yet.. little time has passed
FPS locked?
try neocore please
step 2 for what??
to large rom any way....
bobsido said:
Yes, pink screen work normally. No have any mount, multitouch, accelerometer and proximity sensor problems yet.. little time has passed
Click to expand...
Click to collapse
Thank you for the quick answer!
Since you are able to enter in pink screen mode, can you upload the original/stock boot.img?
I just extracted the rom from UPDATE_g.APP but I can only manage the system.img and the only way to extract the boot.img is the pink screen.
Thank you in advance!
akalos said:
FPS locked?
try neocore please
step 2 for what??
to large rom any way....
Click to expand...
Click to collapse
This is a clear original ROM, no patch or root. I make standard root procedure, it's work.
Sent from my U8800Pro using xda premium
kalo86 said:
Thank you for the quick answer!
Since you are able to enter in pink screen mode, can you upload the original/stock boot.img?
Click to expand...
Click to collapse
I do this tomorrow, too late
Sent from my U8800Pro using xda premium
B552 = B540 + Pink Screen Mode, nothing more
Ok, thank you always, but I flashed the update and copied the boot.img file through the pink screen.
The ROM has FPS limit and the compass mode in Google Maps Street View doesn't work, maybe with a reboot the compass mode will work fine.
The external sdcard is not correctly mounted after a full shutdown, so the bug persists still now.
The multitouch bug after the lockscreen is also in life...
Then I have a question: what did Huawei do on this new B552 base?
The only thing I see like a "news" is Google Music, nothing more.
I have a conclusion:
B552 = B540 + pink screen
Regards,
kalo86
downloading it now
tomorrow i will extract the zip and i will update to this stock firmware.
then i will copy the boot.img on my pc, i will extract the system.img from updata_g.app and i will cook the new version of my Countach
Hi Matteo,
yes, I did the same procedure, you can extract only system.img with dsixda kitchen, if you want boot.img you need to install with the dload folder procedure the original firmware and then put your U8800 Pro in pink screen mode.
If you trust in me, you can take my boot.img, it's the same of the original one but I only added root permission and init.d run-script.
Hoping to help, this is the file for you and other people:
kalo86 said:
Hi Matteo,
yes, I did the same procedure, you can extract only system.img with dsixda kitchen, if you want boot.img you need to install with the dload folder procedure the original firmware and then put your U8800 Pro in pink screen mode.
If you trust in me, you can take my boot.img, it's the same of the original one but I only added root permission and init.d run-script.
Hoping to help, this is the file for you and other people:
Click to expand...
Click to collapse
Thanks
Anyway i prefer to update to the official fw and then cook it because i want to analyse changes in this new fw.
Btw...i have looked for it on huawei site but i have not found it.
Inviato dal mio U8800Pro usando Tapatalk
recovery mode?
i just can't,volume +,power do nothing,after change recovery img with CWM Recovery 5.0.2.7
akalos said:
recovery mode?
i just can't,volume +,power do nothing,after change recovery img with CWM Recovery 5.0.2.7
Click to expand...
Click to collapse
just now replaces the original recovery.img file with attached, everything works fine, without any problems.
is ROOT for this ROM?
Just trying, but have many problems with install.
Format you sd card with windows 7 . FAT32.
SD formater is not working good for me.
just installed this official update. it is really similar to the B512 and B540.
already extracted boot.img and system.img, i have already cooked the Countach RC1. i will upload it tomorrow.
Ramucio said:
is ROOT for this ROM?
Just trying, but have many problems with install.
Format you sd card with windows 7 . FAT32.
SD formater is not working good for me.
Click to expand...
Click to collapse
Standard root:
1. Go to pink screen.
2. Replace original boot.img with patched, save original.
3. Reboot, wait when phone fully load .
4. Go to pink screen again and recover original boot.img, reboot.
5. When phone load wipe factory settings.
6. Done, your phone rooted.
For me it's work without problem.
Sent from my U8800Pro using xda premium
pure
on SD card make directory named "dload"
copy the UPDATE_g.APP into (approx 370 MB)
rename the UPDATE_g.APP to UPDATE.APP
update via SD card update (no pinkscreen), but if you want, use pinkscreen, it is the same
immediately after first reboot, pull out the battery, insert the batt. go to pinkscreen, delete the ****ty cust.img, reboot and continue with installation.
you will get pure gingerbread without any customizations (yes, there is the huawei launcher and beyond the sky theme, i like it)
for root, oc, use geno´s boot.img, for HDR edit the build.prop
if you like huawei´s boot animation, copy it to system/media folder (files bootanimation.zip and bootanimationex.zip)
step 2 and step 3 is not needed
Missed call problem exist? When someone want's to call he heards that you are unavailable/not on network or the phone is turned off.
Sent from my ragelis

NOOBS Tutorial on updating to official ICS and getting CM10 by Ivan UPDATED

YOU MUST BE ON OFFICIAL GB FOR THIS TO WORK!!!
1)download official 4.0 ics from huawei website. you can find the link here :http://www.huaweidevice.com/worldwi...=toDownloadFile&flay=software&softid=NDY1NTY=
2)format your sd card. i recommend using a 4gb one.
3)extract rar file you downloaded.
4)go to folder step one. inside it you will find a folder named dload.copy that folder.
5)turn off your device.
6)paste the dload folder you just copied to you root of sd card.
7)make sure you have only the dload folder in your sd card.
8)put the sd card in your device and then press power button and volume + and volume -
9)you should see the updating and then update complete. then pull of your battery.
10)format the sd card again and repeat the steps with dload folder that can be found in folder step 2 from the 4.0 ics you download and extracted.
11)when done all three updates unlock pink screen(instructions can be found here: http://forum.xda-developers.com/showthread.php?t=1736650 )
12)download recovery by ivan that can be found here : http://forum.xda-developers.com/showthread.php?t=1948309 .
13)delete dload folder from sd card if you still have it there.turn off your device.
14)press power button and vol + and vol -. the pink screen should come up then.
15)connect your phone to the pc.
16) install drivers and open the folder image that will come up.
17)inside folder image you will find a recovery.img file. then rename the recoveryivan.img you downloaded to recovery.img and replace the existing one in image folder with it.
18)download a CM10 ROM (mauro,gadana,frozenpika or the one by ivan.)
19)place the rar file of CM10 to your sd card and make sure device is off.
20)press vol+ and power button and recovery should come up.
21)do all 4 wipes.(battery stats wipe, cache partition wipe, data wipe, dalvik cache wipe)
22)then click install from sd card and you are done
Happy Flashing!
i have also made a fix to the panorama here : http://forum.xda-developers.com/showthread.php?t=1951481&page=15
staca said:
YOU MUST BE ON OFFICIAL GB FOR THIS TO WORK!!!
1)download official 4.0 ics from huawei website. you can find the link here :http://www.huaweidevice.com/worldwid...oftid=NDY1NTY=
2)format your sd card. i recommend using a 4gb one.
3)extract rar file you downloaded.
4)go to folder step one. inside it you will find a folder named dload.copy that folder.
5)turn off your device.
6)paste the dload folder you just copied to you root of sd card.
7)make sure you have only the dload folder in your sd card.
8)put the sd card in your device and then press power button and volume + and volume -
9)you should see the updating and then update complete. then pull of your battery.
10)format the sd card again and repeat the steps with dload folder that can be found in folder step 2 from the 4.0 ics you download and extracted.
11)when done all three updates unlock pink screen(instructions can be found here: http://forum.xda-developers.com/show....php?t=1736650 )
12)download recovery by ivan that can be found here : http://forum.xda-developers.com/show....php?t=1948309.
13)delete dload folder from sd card if you still have it there.turn off your device.
14)press power button and vol + and vol -. the pink screen should come up then.
15)connect your phone to the pc.
16) install drivers and open the folder image that will come up.
17)inside folder image you will find a recovery.img file. then rename the recoveryivan.img you downloaded to recovery.img and replace the existing one in image folder with it.
18)download a CM10 ROM (mauro,gadana,frozenpika or the one by ivan.)
19)place the rar file of CM10 to your sd card and make sure device is off.
20)press vol+ and power button and recovery should come up.
21)do all 4 wipes.
22)then click install from sd card and you are done
Happy Flashing!
i have also made a fix to the panorama here : http://forum.xda-developers.com/showthread.php?t=1951481&page=15
Click to expand...
Click to collapse
this guide works for U8800-51?
cesarparra27 said:
this guide works for U8800-51?
Click to expand...
Click to collapse
No, the U8800-51 is more complicated and I will eventually make a guide.
Somcom3X said:
No, the U8800-51 is more complicated and I will eventually make a guide.
thanks for the work
I will look to this publication
Click to expand...
Click to collapse
Thread Cleaned​
Show some respect for this users efforts! if anybody feels something is in the wrong place, please report it for the moderation teams attention, we will make the decision.​
Download link in step 1 is invalid?
Sokko said:
Download link in step 1 is invalid?
Click to expand...
Click to collapse
Well here is the link, unless you got it downloaded link
OP the links are not working except for the last one can you fix them please? Kindly also be more elaborative e.g. what does do all 4 wipes mean etc.
nayneshdev said:
OP the links are not working except for the last one can you fix them please? Kindly also be more elaborative e.g. what does do all 4 wipes mean etc.
Click to expand...
Click to collapse
ok done.
Where can I find an Official GB 2.3.5 rom?
PLease help,,,
Thanks ^^
Edited: I've found it
Thanks anyway ^^
Somcom3X said:
No, the U8800-51 is more complicated and I will eventually make a guide.
Click to expand...
Click to collapse
Thank for all the work, I am still eagerly waiting for U8800-51 CM10 installation guide
an.dro.id said:
Thank for all the work, I am still eagerly waiting for U8800-51 CM10 installation guide
Click to expand...
Click to collapse
Eager hmmm. It has a 17kb/s WiFi problems
Sent from my U8800-51 using xda premium

[TUTORIAL] How to Fix RTL (Arabic, Ardu, Farsi & Hebrew) Stock & Custom ROMs GT-S5830

[TUTORIAL] How to Fix RTL (Arabic, Ardu, Farsi & Hebrew) Stock & Custom ROMs GT-S5830
This Patch will only fix RTL (Right to left Languages) and connect letters So you can read correctly.
This Patch Wont Add Arabic or other language to your rom Settings.​Please make a nandroid backup of your system before attempting to apply this patch.​
Requirements:
1- Your device needs to be rooted.
2- Your Android version is 2.1 or newer
3- Your ROM needs to be deodexed.
4- Your rom is not based on MIUI.
Steps to apply the patch:
1- Download the patch arabic_script_0.907_windows.zip from Attachments and extract it to a folder on your computer.
2- Pull these 3 files from your phone /system using any explorer and place it in the subfolder "input" that you extracted in step 1
a) /system/framework/framework.jar
b) /system/lib/libandroid_runtime.so
c) /system/lib/libwebcore.so
3- Double click on commands.exe. Do not close the black cmd screens that will pop up. Once the patch is done, you should get a flashable file in subfolder "output".
4- Go into recovery mod, mount system and flash the file.
If flashing through recovery didn’t work for some reason, you’ll need to do the following manually:
Put /framework.jar in your phone at /system/framework/
Put /libandroid_runtime.so in your phone at /system/lib/
Put /libicuuc-arabic.so in your phone at /system/lib/
Put /libwebcore.so in your phone at /system/lib/
Put /lib__bcore.so in your phone at /system/lib/
5- Downlod & Extract DroidSansArabic.zip from attachments and replace DroidSansArabic.ttf with the arabic font located in /system/fonts and reboot
Sometimes permissions and xml data doesn’t get updated correctly resulting in corrupted data entries. If you receive a bunch of Force Closes after a reboot, you’ll need to Factory Reset.
Credits:
- Madmack Original Thread
Ahmed hamouda said:
This Patch will only fix RTL (Right to left Languages) and connect letters So you can read correctly.
This Patch Wont Add Arabic or other language to your rom Settings.​Please make a nandroid backup of your system before attempting to apply this patch.​
Requirements:
1- Your device needs to be rooted.
2- Your Android version is 2.1 or newer
3- Your ROM needs to be deodexed.
4- Your rom is not based on MIUI.
Steps to apply the patch:
1- Download the patch arabic_script_0.907_windows.zip from Attachments and extract it to a folder on your computer.
2- Pull these 3 files from your phone /system using any explorer and place it in the subfolder "input" that you extracted in step 1
a) /system/framework/framework.jar
b) /system/lib/libandroid_runtime.so
c) /system/lib/libwebcore.so
3- Double click on commands.exe. Do not close the black cmd screens that will pop up. Once the patch is done, you should get a flashable file in subfolder "output".
4- Go into recovery mod, mount system and flash the file.
If flashing through recovery didn’t work for some reason, you’ll need to do the following manually:
Put /framework.jar in your phone at /system/framework/
Put /libandroid_runtime.so in your phone at /system/lib/
Put /libicuuc-arabic.so in your phone at /system/lib/
Put /libwebcore.so in your phone at /system/lib/
Put /lib__bcore.so in your phone at /system/lib/
5- Downlod & Extract DroidSansArabic.zip from attachments and replace DroidSansArabic.ttf with the arabic font located in /system/fonts and reboot
Sometimes permissions and xml data doesn’t get updated correctly resulting in corrupted data entries. If you receive a bunch of Force Closes after a reboot, you’ll need to Factory Reset.
Credits:
- Madmack Original Thread
Click to expand...
Click to collapse
thank you ahmad ^_^
Sent from my GT-S5830 using Tapatalk 2
Now its working sory
Sent from my GT-S5830 using xda app-developers app
mother abdulsamad said:
thank you ahmad ^_^
Sent from my GT-S5830 using Tapatalk 2
Click to expand...
Click to collapse
Please don't quote the whole post
Thanks a lot Sir,
It was hard for me becuase the zip didn't flashed, but yeah I did it. You always supported the world base on RTL
flash file not work for me
and while replacing libandroid_runtime.so my mobile hanged
Ramyelbadry said:
flash file not work for me
and while replacing libandroid_runtime.so my mobile hanged
Click to expand...
Click to collapse
حط الملفات في ملف الروم قبل ما تفلشه وبعدها فلش الروم
الطريقه جربتها على Stocklite V8 والحين شغال عليه
Sent from my GT-S5830 using xda app-developers app
Did you restart i mean pull battery and restart again then fix permessions i was having the same after restart it works
i have a problem with the webbrowser
otherwise all good .. expect i can't make arabic my phone language which is fine by me i use it in english
but anytime i open the web it crash without even give me the force close message ...
also this happens with both the 3rd party web browsers and the main one
MiZoSpaDe said:
i have a problem with the webbrowser
otherwise all good .. expect i can't make arabic my phone language which is fine by me i use it in english
but anytime i open the web it crash without even give me the force close message ...
also this happens with both the 3rd party web browsers and the main one
Click to expand...
Click to collapse
Browser language is related to /libwebcore.so So try to replace this file from any other rom and run the patch again. it should be fine :fingers-crossed:
try it on lg e400 deodexed rom ... ang get flashable zip .. and replace the files .. then flash zip file ,,, get bootloops .. so many time
Napst3r88 said:
try it on lg e400 deodexed rom ... ang get flashable zip .. and replace the files .. then flash zip file ,,, get bootloops .. so many time
Click to expand...
Click to collapse
Replace files from the flashable.zip with the rom.zip and flash the whole rom again. this is the safest method to avoid any bootloops
I've been looking for this long time ago...
I'll give it a try...
Sent from my GT-S5830 using Tapatalk 2
How can see iPhone or others emo. I means font.
Sent from my GT-S5830 using Tapatalk 2

Categories

Resources