stock rom help! - Huawei Ideos X5 U8800

trying to find U8800 V100R001C00B136SP02CUSTC205D001 (Finland Elisa)
to download no links on huawei homepage works so.
need .zip file found a rar but says (bad) when i try to install
getting black screen after my SIM-card provider image dissapears.
thanks in advance

You've got a PM >
Remember, you CANNOT install the stock Roms from within the recovery.
To install a stock ROM, all you have to do is:
- Create a folder on the SD card named "dload"
- Get the contents (usually 2 big files) of the stock Rom archive and place them on the "dload" folder.
- Switch off the phone and press Vol+, Vol- and Power.
The stock Rom installation is automatic and you don't have to do anything during installation.

oh ok, good to know.
problem solved already tried to install older version of miui. the new version was messing with my phone nothing worked with it.
thanks anyway saving this for the future <3 !

katu2006 said:
You've got a PM >
Remember, you CANNOT install the stock Roms from within the recovery.
To install a stock ROM, all you have to do is:
- Create a folder on the SD card named "dload"
- Get the contents (usually 2 big files) of the stock Rom archive and place them on the "dload" folder.
- Switch off the phone and press Vol+, Vol- and Power.
The stock Rom installation is automatic and you don't have to do anything during installation.
Click to expand...
Click to collapse
Where can i find this rom archive? I'd like to have a rom backup of my phone U8800 V100R001C00B135SP01CUSTNLDC253D001 (The Netherlands) before i flash anything. Is this the latest stock rom for my country? If i would resize data will this be a problem when restoring the stock rom?

morgoth12 said:
Where can i find this rom archive? I'd like to have a rom backup of my phone U8800 V100R001C00B135SP01CUSTNLDC253D001 (The Netherlands) before i flash anything. Is this the latest stock rom for my country? If i would resize data will this be a problem when restoring the stock rom?
Click to expand...
Click to collapse
I would advise against resizing the partitions, as it's difficult to restore them in case you need the phone for warranty.
I've sent you a PM with some info, let me know if you need more.

Related

[Q]Xrecovery Question

sorry, my english is poor...so, if any mistake....lol....I download the [ROM]Stable 2.2.1 ROM for X8 | Based on miniCM, put in my sdcard xrecovery/backup, but in xrecovery choose backup/restore can't find it....why, i put it in sdcard root change it name to update.zip could find it, buy can't flash.........install update.zip , it so fast finish, and after reboot, the system not be changed...
so need help.....
are u sure no change to the system? chack out in the phone status, are the firmware version still the old firmware?
if so, do factory reset in xrecovery then re-install it
You must extract downloaded zip to /xrecovery/backup and then in xrecovery select restore
Extract???...let me have a try....Yeah, you are right, extract it follow you told, it success, thanks a lot, buy most people said that just .zip put in the folder just ok....why i can't......

[Q] flashing failed :/

I tried to flash my HTC HD2 with this guide
http://forum.xda-developers.com/showthread.php?t=893948
after installing Hardspl 2.08 i used MAGLDR1.13
but now the phone just boots with white screen and HTC logo
i guess i forgot to install the radio?
but what now?
cant reach bootloader
just comes up for one second when i try hardreset
then asks for restoring to factory setting but that doesnt work neither
is it possible to autoflash with some sort of sd card
or do i have a chance to get at least usb connection up again ?
Thanks for help
edit
ive read that its possible to boot from sd card, using some sort of LEOIMG.nbh at root directory
extracted exe file and renamed "RUU_signed.nbh" to LEOIMG.nbh
ill try next step tommorow
gn8 ^^
You know the keys to get into bootloader isn't the same as for a hard reset, right?
Hold volume down only, tap and release power, release vol down only when stripey screen appears.
uhm, thanks ...
i swear it didnt work but for some reason now works
ive read in that guide
"3. Browse to the folder you extracted your NAND Android Package files to on your pc, right click on Run DAF.exe (or Install.exe if DAF.exe isnt present) and select Run as Administrator"
but in "Tyween's Typhoon CM7 v3.6.3" rom is neither daf or install.exe?
Do i have to launch magldr from pc and preload rom into it, befor transfering it into htc?
sorry ... im still confused
well okay i think i hav eto upload some files into it, but which? all of zip or do i have to upload the original zip?
inside that zip theres "boot, meta-inf and system"
Copy the whole zip to SD and install it from cwm.
ive done it, thanks

U8800Pro - Last russian ROM 2.3 (1C00B552CUSTC10D001) 2.6.35 kernel

link to the ROM on www.narod.ru. Type digit code, press "скачать", and have a link.
original post here.
If you have Android 2.2 on your phone:
1. Download the archive;
2. Create in the root of SD-card folder "dload";
3. Write to the new folder, all files from step1/dload (UPDATE.APP and UPDATE_g.APP);
4. Insert a memory card into the phone (if not already inserted) and pull out the battery;
5. Turn on the phone, holding down the volume up and down;
6. Once the firmware is installed, delete the folder dload all the files and write files from step2/dload;
7. Repeat the procedure for the folder step3/dload.
If you have Android 2.3 on your phone:
1. Download the archive;
2. Delete a file UPDATE.APP from folder step1/dload;
3. Rename a file UPDATE_g.APP to UPDATE.APP;
4. Create in the root of SD-card folder "dload";
5. Write to the new folder the renamed file UPDATE.APP from a folder step1/dload;
6. Insert a memory card into the phone (if not already inserted) and pull out the battery;
7. Turn on the phone, holding down the volume up and down;
8. Once the firmware is installed, delete the folder dload all the files and write files from step2/dload;
9. Repeat the procedure for the folder step3/dload.
* If any of the processes will not start - log-in and run the installation manual settings-memory-upgrade software.
* If some of the processes of updating the device hanging - wait 10 minutes then remove the battery. After 10 seconds, reinsert.
On my phone firmware write good. First run language is english, and you must manually configure APN.
any fixes???
Hi,
thank you very much for sharing this great news.
Anyway I would like to know if this new firmware is fixing the sdcard mount problem, the multitouch bug and the accelerometer.
Another thing: can you enter in pink screen mode with this new base-rom?
Regards,
kalo86
akalos said:
any fixes???
Click to expand...
Click to collapse
Unfortunately I no have information about any fixes.
Most likely, it`s the last firmware on 2.3, no more updates. OTA is not expected - install manually. About the ICS no any information yet.
First personal experience - a better camera and battery life. Still testing.
kalo86 said:
Hi,
Another thing: can you enter in pink screen mode with this new base-rom?
Regards,
kalo86
Click to expand...
Click to collapse
Yes, pink screen work normally. No have any mount, multitouch, accelerometer and proximity sensor problems yet.. little time has passed
FPS locked?
try neocore please
step 2 for what??
to large rom any way....
bobsido said:
Yes, pink screen work normally. No have any mount, multitouch, accelerometer and proximity sensor problems yet.. little time has passed
Click to expand...
Click to collapse
Thank you for the quick answer!
Since you are able to enter in pink screen mode, can you upload the original/stock boot.img?
I just extracted the rom from UPDATE_g.APP but I can only manage the system.img and the only way to extract the boot.img is the pink screen.
Thank you in advance!
akalos said:
FPS locked?
try neocore please
step 2 for what??
to large rom any way....
Click to expand...
Click to collapse
This is a clear original ROM, no patch or root. I make standard root procedure, it's work.
Sent from my U8800Pro using xda premium
kalo86 said:
Thank you for the quick answer!
Since you are able to enter in pink screen mode, can you upload the original/stock boot.img?
Click to expand...
Click to collapse
I do this tomorrow, too late
Sent from my U8800Pro using xda premium
B552 = B540 + Pink Screen Mode, nothing more
Ok, thank you always, but I flashed the update and copied the boot.img file through the pink screen.
The ROM has FPS limit and the compass mode in Google Maps Street View doesn't work, maybe with a reboot the compass mode will work fine.
The external sdcard is not correctly mounted after a full shutdown, so the bug persists still now.
The multitouch bug after the lockscreen is also in life...
Then I have a question: what did Huawei do on this new B552 base?
The only thing I see like a "news" is Google Music, nothing more.
I have a conclusion:
B552 = B540 + pink screen
Regards,
kalo86
downloading it now
tomorrow i will extract the zip and i will update to this stock firmware.
then i will copy the boot.img on my pc, i will extract the system.img from updata_g.app and i will cook the new version of my Countach
Hi Matteo,
yes, I did the same procedure, you can extract only system.img with dsixda kitchen, if you want boot.img you need to install with the dload folder procedure the original firmware and then put your U8800 Pro in pink screen mode.
If you trust in me, you can take my boot.img, it's the same of the original one but I only added root permission and init.d run-script.
Hoping to help, this is the file for you and other people:
kalo86 said:
Hi Matteo,
yes, I did the same procedure, you can extract only system.img with dsixda kitchen, if you want boot.img you need to install with the dload folder procedure the original firmware and then put your U8800 Pro in pink screen mode.
If you trust in me, you can take my boot.img, it's the same of the original one but I only added root permission and init.d run-script.
Hoping to help, this is the file for you and other people:
Click to expand...
Click to collapse
Thanks
Anyway i prefer to update to the official fw and then cook it because i want to analyse changes in this new fw.
Btw...i have looked for it on huawei site but i have not found it.
Inviato dal mio U8800Pro usando Tapatalk
recovery mode?
i just can't,volume +,power do nothing,after change recovery img with CWM Recovery 5.0.2.7
akalos said:
recovery mode?
i just can't,volume +,power do nothing,after change recovery img with CWM Recovery 5.0.2.7
Click to expand...
Click to collapse
just now replaces the original recovery.img file with attached, everything works fine, without any problems.
is ROOT for this ROM?
Just trying, but have many problems with install.
Format you sd card with windows 7 . FAT32.
SD formater is not working good for me.
just installed this official update. it is really similar to the B512 and B540.
already extracted boot.img and system.img, i have already cooked the Countach RC1. i will upload it tomorrow.
Ramucio said:
is ROOT for this ROM?
Just trying, but have many problems with install.
Format you sd card with windows 7 . FAT32.
SD formater is not working good for me.
Click to expand...
Click to collapse
Standard root:
1. Go to pink screen.
2. Replace original boot.img with patched, save original.
3. Reboot, wait when phone fully load .
4. Go to pink screen again and recover original boot.img, reboot.
5. When phone load wipe factory settings.
6. Done, your phone rooted.
For me it's work without problem.
Sent from my U8800Pro using xda premium
pure
on SD card make directory named "dload"
copy the UPDATE_g.APP into (approx 370 MB)
rename the UPDATE_g.APP to UPDATE.APP
update via SD card update (no pinkscreen), but if you want, use pinkscreen, it is the same
immediately after first reboot, pull out the battery, insert the batt. go to pinkscreen, delete the ****ty cust.img, reboot and continue with installation.
you will get pure gingerbread without any customizations (yes, there is the huawei launcher and beyond the sky theme, i like it)
for root, oc, use geno´s boot.img, for HDR edit the build.prop
if you like huawei´s boot animation, copy it to system/media folder (files bootanimation.zip and bootanimationex.zip)
step 2 and step 3 is not needed
Missed call problem exist? When someone want's to call he heards that you are unavailable/not on network or the phone is turned off.
Sent from my ragelis

NOOBS Tutorial on updating to official ICS and getting CM10 by Ivan UPDATED

YOU MUST BE ON OFFICIAL GB FOR THIS TO WORK!!!
1)download official 4.0 ics from huawei website. you can find the link here :http://www.huaweidevice.com/worldwi...=toDownloadFile&flay=software&softid=NDY1NTY=
2)format your sd card. i recommend using a 4gb one.
3)extract rar file you downloaded.
4)go to folder step one. inside it you will find a folder named dload.copy that folder.
5)turn off your device.
6)paste the dload folder you just copied to you root of sd card.
7)make sure you have only the dload folder in your sd card.
8)put the sd card in your device and then press power button and volume + and volume -
9)you should see the updating and then update complete. then pull of your battery.
10)format the sd card again and repeat the steps with dload folder that can be found in folder step 2 from the 4.0 ics you download and extracted.
11)when done all three updates unlock pink screen(instructions can be found here: http://forum.xda-developers.com/showthread.php?t=1736650 )
12)download recovery by ivan that can be found here : http://forum.xda-developers.com/showthread.php?t=1948309 .
13)delete dload folder from sd card if you still have it there.turn off your device.
14)press power button and vol + and vol -. the pink screen should come up then.
15)connect your phone to the pc.
16) install drivers and open the folder image that will come up.
17)inside folder image you will find a recovery.img file. then rename the recoveryivan.img you downloaded to recovery.img and replace the existing one in image folder with it.
18)download a CM10 ROM (mauro,gadana,frozenpika or the one by ivan.)
19)place the rar file of CM10 to your sd card and make sure device is off.
20)press vol+ and power button and recovery should come up.
21)do all 4 wipes.(battery stats wipe, cache partition wipe, data wipe, dalvik cache wipe)
22)then click install from sd card and you are done
Happy Flashing!
i have also made a fix to the panorama here : http://forum.xda-developers.com/showthread.php?t=1951481&page=15
staca said:
YOU MUST BE ON OFFICIAL GB FOR THIS TO WORK!!!
1)download official 4.0 ics from huawei website. you can find the link here :http://www.huaweidevice.com/worldwid...oftid=NDY1NTY=
2)format your sd card. i recommend using a 4gb one.
3)extract rar file you downloaded.
4)go to folder step one. inside it you will find a folder named dload.copy that folder.
5)turn off your device.
6)paste the dload folder you just copied to you root of sd card.
7)make sure you have only the dload folder in your sd card.
8)put the sd card in your device and then press power button and volume + and volume -
9)you should see the updating and then update complete. then pull of your battery.
10)format the sd card again and repeat the steps with dload folder that can be found in folder step 2 from the 4.0 ics you download and extracted.
11)when done all three updates unlock pink screen(instructions can be found here: http://forum.xda-developers.com/show....php?t=1736650 )
12)download recovery by ivan that can be found here : http://forum.xda-developers.com/show....php?t=1948309.
13)delete dload folder from sd card if you still have it there.turn off your device.
14)press power button and vol + and vol -. the pink screen should come up then.
15)connect your phone to the pc.
16) install drivers and open the folder image that will come up.
17)inside folder image you will find a recovery.img file. then rename the recoveryivan.img you downloaded to recovery.img and replace the existing one in image folder with it.
18)download a CM10 ROM (mauro,gadana,frozenpika or the one by ivan.)
19)place the rar file of CM10 to your sd card and make sure device is off.
20)press vol+ and power button and recovery should come up.
21)do all 4 wipes.
22)then click install from sd card and you are done
Happy Flashing!
i have also made a fix to the panorama here : http://forum.xda-developers.com/showthread.php?t=1951481&page=15
Click to expand...
Click to collapse
this guide works for U8800-51?
cesarparra27 said:
this guide works for U8800-51?
Click to expand...
Click to collapse
No, the U8800-51 is more complicated and I will eventually make a guide.
Somcom3X said:
No, the U8800-51 is more complicated and I will eventually make a guide.
thanks for the work
I will look to this publication
Click to expand...
Click to collapse
Thread Cleaned​
Show some respect for this users efforts! if anybody feels something is in the wrong place, please report it for the moderation teams attention, we will make the decision.​
Download link in step 1 is invalid?
Sokko said:
Download link in step 1 is invalid?
Click to expand...
Click to collapse
Well here is the link, unless you got it downloaded link
OP the links are not working except for the last one can you fix them please? Kindly also be more elaborative e.g. what does do all 4 wipes mean etc.
nayneshdev said:
OP the links are not working except for the last one can you fix them please? Kindly also be more elaborative e.g. what does do all 4 wipes mean etc.
Click to expand...
Click to collapse
ok done.
Where can I find an Official GB 2.3.5 rom?
PLease help,,,
Thanks ^^
Edited: I've found it
Thanks anyway ^^
Somcom3X said:
No, the U8800-51 is more complicated and I will eventually make a guide.
Click to expand...
Click to collapse
Thank for all the work, I am still eagerly waiting for U8800-51 CM10 installation guide
an.dro.id said:
Thank for all the work, I am still eagerly waiting for U8800-51 CM10 installation guide
Click to expand...
Click to collapse
Eager hmmm. It has a 17kb/s WiFi problems
Sent from my U8800-51 using xda premium

P8 Lite bricked, need a solution

Hi,
I have a problem with my P8 lite I bought today from some guy. It's stuck on boot logo, I tried wipe cache, factory reset, nothing helps. Tried fastboot, but my phone is locked in a nice green color. Can't unlock it since I don't know any numbers (IMEI, serial, firmware, etc), neither do I have the original package, so basically I'm stuck there. Tried the 3 button method with a 4Gb SD card and a "dload" folder on it with an "UPDATE.APP", still nothing, at 5% it says "Software update failed! Get help from ..... ". Maybe I'm doing something wrong? I watched some youtube videos and saw some guy putting the "dload" folder in the internal memory but since the phone is bricked I can't access it. Maybe that's the issue? Or do I have to use a card adapter instead of my old android phone for data transfers? Pardon my English, I'm more of a speaker than a writer. Any help will be appreciated.
Update: tried software b895(vodafone), now it said "incompatibility with current version" instead of "get help". Am I getting any closer?
Plikenz said:
Hi,
I have a problem with my P8 lite I bought today from some guy. It's stuck on boot logo, I tried wipe cache, factory reset, nothing helps. Tried fastboot, but my phone is locked in a nice green color. Can't unlock it since I don't know any numbers (IMEI, serial, firmware, etc), neither do I have the original package, so basically I'm stuck there. Tried the 3 button method with a 4Gb SD card and a "dload" folder on it with an "UPDATE.APP", still nothing, at 5% it says "Software update failed! Get help from ..... ". Maybe I'm doing something wrong? I watched some youtube videos and saw some guy putting the "dload" folder in the internal memory but since the phone is bricked I can't access it. Maybe that's the issue? Or do I have to use a card adapter instead of my old android phone for data transfers? Pardon my English, I'm more of a speaker than a writer. Any help will be appreciated.
Update: tried software b895(vodafone), now it said "incompatibility with current version" instead of "get help". Am I getting any closer?
Click to expand...
Click to collapse
FIrst you need the rollback ROM, after flash it then you can try a ROM
Google it
.
persona78 said:
FIrst you need the rollback ROM, after flash it then you can try a ROM
Google it
.
Click to expand...
Click to collapse
Tried it too, doesn't work. Gives me the same error. And "google it" isn't an answer, I wouldn't be here, thanks.
Plikenz said:
Tried it too, doesn't work. Gives me the same error. And "google it" isn't an answer, I wouldn't be here, thanks.
Click to expand...
Click to collapse
rollback rom fails to flash?
.
persona78 said:
rollback rom fails to flash?
.
Click to expand...
Click to collapse
If you're talking about downgrading, then yes, it fails... As far as I understand, it doesn't need downgrading. Now trying every single one of the firmwares .....
Plikenz said:
If you're talking about downgrading, then yes, it fails... As far as I understand, it doesn't need downgrading. Now trying every single one of the firmwares .....
Click to expand...
Click to collapse
The rollback rom just unlock your cust so you can flash some other rom...
Do you flash the update.zip or the update.app file?
.
persona78 said:
The rollback rom just unlock your cust so you can flash some other rom...
Do you flash the update.zip or the update.app file?
.
Click to expand...
Click to collapse
I tried UPDATE.APP, because if I get it right, UPDATE.ZIP is only flashable through TWRP, is that correct? I'm doing everything with the 3 button method, anything I try just fails. And upload to SD takes so long that I'm starting to lose patience... Maybe there's some custom ROM that can be flashed through UPDATE.APP? Maybe it's possible to make (convert) one? I'm new to this phone and I swear, this has got to be the most annoying phone ever... I've never encountered such problems with Samsung or Sony phones. Thank you for trying to help because I don't have a single clue of what is going on, since it just says "get help".... Yea, I'm trying to. What about the Vodafone firmwares, why is it telling me that the version is incompatible with my current software? Does it mean that I have to find another version of Vodafone firmware or that I have to use something other than that?
Plikenz said:
I tried UPDATE.APP, because if I get it right, UPDATE.ZIP is only flashable through TWRP, is that correct? I'm doing everything with the 3 button method, anything I try just fails. And upload to SD takes so long that I'm starting to lose patience... Maybe there's some custom ROM that can be flashed through UPDATE.APP? Maybe it's possible to make (convert) one? I'm new to this phone and I swear, this has got to be the most annoying phone ever... I've never encountered such problems with Samsung or Sony phones. Thank you for trying to help because I don't have a single clue of what is going on, since it just says "get help".... Yea, I'm trying to. What about the Vodafone firmwares, why is it telling me that the version is incompatible with my current software? Does it mean that I have to find another version of Vodafone firmware or that I have to use something other than that?
Click to expand...
Click to collapse
Wait!
The update.zip can be flash with the 3 keys to, only need to be in internal or external memory. Only need to delete the dload folder.
Try rollback update.zip, you need it to unlock cust.
Tell me if you made it.
.
persona78 said:
Wait!
The update.zip can be flash with the 3 keys to, only need to be in internal or external memory. Only need to delete the dload folder.
Try rollback update.zip, you need it to unlock cust.
Tell me if you made it.
.
Click to expand...
Click to collapse
Could you explain more thoroughly please? I tried changing UPDATE.APP extension to UPDATE.ZIP just by renaming the file, put it on a blank SD card (deleted dload folder), but no luck... I read somewhere that this phone could have had a custom firmware installed and that's why it won't budge? Is it possible for example to install TWRP or any custom firmware like AICP and etc. with this method? Then I wouldn't have any issues.
Plikenz said:
Could you explain more thoroughly please? I tried changing UPDATE.APP extension to UPDATE.ZIP just by renaming the file, put it on a blank SD card (deleted dload folder), but no luck... I read somewhere that this phone could have had a custom firmware installed and that's why it won't budge? Is it possible for example to install TWRP or any custom firmware like AICP and etc. with this method? Then I wouldn't have any issues.
Click to expand...
Click to collapse
Don't change the extension... Don't extract the update.app from the zip, just let the zip like it is and paste it into internal or external storage, is a flashebel zip and works like update.app.
.
persona78 said:
Don't change the extension... Don't extract the update.app from the zip, just let the zip like it is and paste it into internal or external storage, is a flashebel zip and works like update.app.
.
Click to expand...
Click to collapse
The contents of the zip file are usually a dload folder with some pdf and word files and something like that, so, I need to have just the update.app in the zip file?
Plikenz said:
The contents of the zip file are usually a dload folder with some pdf and word files and something like that, so, I need to have just the update.app in the zip file?
Click to expand...
Click to collapse
Hi!
Doesn´t have a META-INF folder inside the zip?
.
persona78 said:
Hi!
Doesn´t have a META-INF folder inside the zip?
.
Click to expand...
Click to collapse
Hi, no, it just has a dload folder and a pdf file for instructions. Do I need to rename the zip to update.zip with all of its inside contents or do I just put the update.app file in an archive?
Plikenz said:
Hi, no, it just has a dload folder and a pdf file for instructions. Do I need to rename the zip to update.zip with all of its inside contents or do I just put the update.app file in an archive?
Click to expand...
Click to collapse
If don't have mata-inf file is not a flash zip...
I will check it tomorrow, ok?
.
persona78 said:
If don't have mata-inf file is not a flash zip...
I will check it tomorrow, ok?
.
Click to expand...
Click to collapse
Okay, sure, thank you!
bump
Plikenz said:
bump
Click to expand...
Click to collapse
Link to the update.zip you're trying to flash please.
Grazmeister said:
Link to the update.zip you're trying to flash please.
Click to expand...
Click to collapse
Hi, I've tried alot of them, just googling and downloading everything that says "ALE-L21", eventhough I'm not even 100% sure about that. For example this one:
Huawei P8 Lite Rollback Package (ALE-L21 C900B500, Android 6.0 to Android 5.0
I don't think this is the right one, Update.app doesn't work, these zips don't work, persona78 mentioned something about META-INF folder, but I can't find a rollback package like that anywhere, I saw some firmwares with that folder inside but they don't seem to work. If I knew exactly what I need to find and do then there would be no problem at all.
Plikenz said:
Hi, I've tried alot of them, just googling and downloading everything that says "ALE-L21", eventhough I'm not even 100% sure about that. For example this one:
Huawei P8 Lite Rollback Package (ALE-L21 C900B500, Android 6.0 to Android 5.0
I don't think this is the right one, Update.app doesn't work, these zips don't work, persona78 mentioned something about META-INF folder, but I can't find a rollback package like that anywhere, I saw some firmwares with that folder inside but they don't seem to work. If I knew exactly what I need to find and do then there would be no problem at all.
Click to expand...
Click to collapse
You P8 Lite is dual-sim, correct?
If so, try this link https://forum.xda-developers.com/showpost.php?p=73230358&postcount=2
Put it on a folder inside the SD card:
1- Try creating a "dload" folder with just the update.app AND the update.zip
2- If you have space or with doesn't work, delete the previous and just put the update.app AND the update.zip in the SD CARD main folder.
Let us see if you have luck
Grazmeister said:
You P8 Lite is dual-sim, correct?
If so, try this link https://forum.xda-developers.com/showpost.php?p=73230358&postcount=2
Put it on a folder inside the SD card:
1- Try creating a "dload" folder with just the update.app AND the update.zip
2- If you have space or with doesn't work, delete the previous and just put the update.app AND the update.zip in the SD CARD main folder.
Let us see if you have luck
Click to expand...
Click to collapse
Yea, it is dual sim. The last time I tried b895 it said "incompatibility with current version". And the others just don't seem to work. But I will try once more the way you told me.

Categories

Resources