Related
sorry, my english is poor...so, if any mistake....lol....I download the [ROM]Stable 2.2.1 ROM for X8 | Based on miniCM, put in my sdcard xrecovery/backup, but in xrecovery choose backup/restore can't find it....why, i put it in sdcard root change it name to update.zip could find it, buy can't flash.........install update.zip , it so fast finish, and after reboot, the system not be changed...
so need help.....
are u sure no change to the system? chack out in the phone status, are the firmware version still the old firmware?
if so, do factory reset in xrecovery then re-install it
You must extract downloaded zip to /xrecovery/backup and then in xrecovery select restore
Extract???...let me have a try....Yeah, you are right, extract it follow you told, it success, thanks a lot, buy most people said that just .zip put in the folder just ok....why i can't......
I'm trying to install the Urukdroid but is not going well , the last step transfer the Urukdroid 1.0 installation framework and pressing the power ..after that getting the error file of a corrupt or wrong file and the device is asking for another transfer "please transfer proper installation file" ..what can be wrong , I did downloaded the file many times from different file locations?
Hope someone knows the solution
Thanks
paterdamiaan said:
I'm trying to install the Urukdroid but is not going well , the last step transfer the Urukdroid 1.0 installation framework and pressing the power ..after that getting the error file of a corrupt or wrong file and the device is asking for another transfer "please transfer proper installation file" ..what can be wrong , I did downloaded the file many times from different file locations?
Hope someone knows the solution
Thanks
Click to expand...
Click to collapse
Hey,
Did you extracted the installation file out of the downloaded zip file?
Inside the downloaded file there is a archive file again (forgot what format), this file you have to extract out and copy that file onto your archos
Good luck!
Lenn said:
Hey,
Did you extracted the installation file out of the downloaded zip file?
Inside the downloaded file there is a archive file again (forgot what format), this file you have to extract out and copy that file onto your archos
Good luck!
Click to expand...
Click to collapse
Yes , thats the thing I did , file named UrukDroid-install.tgz copied to the device like it written in the installation procedure ....no need to unzip that one also
Try to download this file:
http://sauron.pourix.com/UrukDroid/UrukDroid-1.0/EI/UrukDroid-install.tgz
It is directly and no need to extract any more.. maybe your archive manager does something wrong..
Lenn said:
Try to download this file:
http://sauron.pourix.com/UrukDroid/UrukDroid-1.0/EI/UrukDroid-install.tgz
It is directly and no need to extract any more.. maybe your archive manager does something wrong..
Click to expand...
Click to collapse
Lenn same thing ...please transfer proper installation file , and ask for another transfer
paterdamiaan said:
Lenn same thing ...please transfer proper installation file , and ask for another transfer
Click to expand...
Click to collapse
drives me crazy ... ..the very last phase is going wrong ..so close....
Okey... me too
Maybe tjeres something wrong with the kernel
Download the zImage and the initramfs as single files from here:
http://sauron.pourix.com/UrukDroid/UrukDroid-1.0/EI/
Then flash the kernel again, like you did it before (via the recovery menu)
After try the installation with the as single file downloaded installation file
Lenn said:
Okey... me too
Maybe tjeres something wrong with the kernel
Download the zImage and the initramfs as single files from here:
http://sauron.pourix.com/UrukDroid/UrukDroid-1.0/EI/
Then flash the kernel again, like you did it before (via the recovery menu)
After try the installation with the as single file downloaded installation file
Click to expand...
Click to collapse
Lenn, this is different , another problem ...after flashing the kernel with the "let's say " new files , what is going fast then going into the developer menu ..archos needs to reboot in that menu and I should get UrukDroid 1.0 Installation framework and select simple installation ..but does not get to that boot ....the original archos kernel completely starts up .
Let me know tomorrow ....we need some sleep being busy with this whole day
I wanted to thank you for the given support for now ..hope someone will know the answer
paterdamiaan said:
Lenn, this is different , another problem ...after flashing the kernel with the "let's say " new files , what is going fast then going into the developer menu ..archos needs to reboot in that menu and I should get UrukDroid 1.0 Installation framework and select simple installation ..but does not get to that boot ....the original archos kernel completely starts up .
Let me know tomorrow ....we need some sleep being busy with this whole day
I wanted to thank you for the given support for now ..hope someone will know the answer
Click to expand...
Click to collapse
Lenn , any new ideas about a solution since yesterday ?
paterdamiaan said:
Lenn , any new ideas about a solution since yesterday ?
Click to expand...
Click to collapse
I may didnt uhderstand you right,but:
Did you boot into the Developer Edition after flashing the new kernel?
You have to, urukdroid is the "new" SDE after the installation
Lenn said:
I may didnt uhderstand you right,but:
Did you boot into the Developer Edition after flashing the new kernel?
You have to, urukdroid is the "new" SDE after the installation
Click to expand...
Click to collapse
Lenn, the files you send me separately did not worked at all , same problem as before invalid file . Flashing the kernel is working , the install zip file Urukdroid transfer at the very last step still gives invalid file ans ask for re-sending a correct file , no matter what I do no file seems to be ok
paterdamiaan said:
Lenn, the files you send me separately did not worked at all , same problem as before invalid file . Flashing the kernel is working , the install zip file Urukdroid transfer at the very last step still gives invalid file ans ask for re-sending a correct file , no matter what I do no file seems to be ok
Click to expand...
Click to collapse
... unfortunality i have no idea atm....
Maybe your disk has a failure... try to completly wipe your archos again install the newest archos firmware directly after the update and try it again...
Sorry, i think but i dont see any solution yet...
paterdamiaan said:
Lenn, the files you send me separately did not worked at all , same problem as before invalid file . Flashing the kernel is working , the install zip file Urukdroid transfer at the very last step still gives invalid file ans ask for re-sending a correct file , no matter what I do no file seems to be ok
Click to expand...
Click to collapse
recap
Flash initramfs.cpio.gz and zImage from SDE boot menu is working fine
after going into
Boot to SDE:
power on (2) Archos, hold up/+ volume key (1) until you see "Archos AXXXX - Boot Menu",
choose "Developer edition" is also working
You should see "UrukDroid 1.0 Installation framework" title. Please choose simple install method. is working well
When asked to, connect Archos to PC (5) once again and copy UrukDroid-install.tgz,
This step is working...transfert can be done
disconnect Archos from PC properly (umount, safely remove device etc.) and press power button (2)
at this point the device saying that there is an invalid file
Try it with advanced install
Choose the recommended values (on the top) but also select that you want to format the partitions and create new ones
Lenn said:
Try it with advanced install
Choose the recommended values (on the top) but also select that you want to format the partitions and create new ones
Click to expand...
Click to collapse
Hmmm tried that already many times , i will give that another try and let you now
paterdamiaan said:
Hmmm tried that already many times , i will give that another try and let you now
Click to expand...
Click to collapse
lenn, did the advanced install , on SD , 512 rootfs ,and 1.5 g for data
Format of all partitions went ok , the transfer of the 140,3 meg file to install ok until the step to press power button once to start the install ..again the invalid file error message
just thinking could it be something with the sd card ?
paterdamiaan said:
lenn, did the advanced install , on SD , 512 rootfs ,and 1.5 g for data
Format of all partitions went ok , the transfer of the 140,3 meg file to install ok until the step to press power button once to start the install ..again the invalid file error message
just thinking could it be something with the sd card ?
Click to expand...
Click to collapse
Aah you installed it on a external sd card?
if yes please give some informations about it (size,speed,class,...)
Lenn said:
Aah you installed it on a external sd card?
if yes please give some informations about it (size,speed,class,...)[/QUO
kingston 32 GB sdc n0214-001 made in taiwan off course
Just one question , if i have choosen most of the time the simple install ..is the Urukdroid also installing on the SD Card?
Can I choose to install on the memory of the archos?
Click to expand...
Click to collapse
paterdamiaan said:
Lenn said:
Aah you installed it on a external sd card?
if yes please give some informations about it (size,speed,class,...)[/QUO
kingston 32 GB sdc n0214-001 made in taiwan off course
Just one question , if i have choosen most of the time the simple install ..is the Urukdroid also installing on the SD Card?
Can I choose to install on the memory of the archos?
Click to expand...
Click to collapse
Lenn, I have choosen for an install on internal memory , now it is working !!!!!!!!!!!!
where can I find the Urukdroid 1.5 ?
Click to expand...
Click to collapse
paterdamiaan said:
Lenn said:
Aah you installed it on a external sd card?
if yes please give some informations about it (size,speed,class,...)
Click to expand...
Click to collapse
kingston 32 GB sdc n0214-001 made in taiwan off course
Just one question , if i have choosen most of the time the simple install ..is the Urukdroid also installing on the SD Card?
Can I choose to install on the memory of the archos?
Click to expand...
Click to collapse
Maybe the sd card is to big for urukdroid... and the sd card have to be formatted to fat32 ad have to be clear..
Normally urukdroid installs on external sd card
You can in the advanced install method
link to the ROM on www.narod.ru. Type digit code, press "скачать", and have a link.
original post here.
If you have Android 2.2 on your phone:
1. Download the archive;
2. Create in the root of SD-card folder "dload";
3. Write to the new folder, all files from step1/dload (UPDATE.APP and UPDATE_g.APP);
4. Insert a memory card into the phone (if not already inserted) and pull out the battery;
5. Turn on the phone, holding down the volume up and down;
6. Once the firmware is installed, delete the folder dload all the files and write files from step2/dload;
7. Repeat the procedure for the folder step3/dload.
If you have Android 2.3 on your phone:
1. Download the archive;
2. Delete a file UPDATE.APP from folder step1/dload;
3. Rename a file UPDATE_g.APP to UPDATE.APP;
4. Create in the root of SD-card folder "dload";
5. Write to the new folder the renamed file UPDATE.APP from a folder step1/dload;
6. Insert a memory card into the phone (if not already inserted) and pull out the battery;
7. Turn on the phone, holding down the volume up and down;
8. Once the firmware is installed, delete the folder dload all the files and write files from step2/dload;
9. Repeat the procedure for the folder step3/dload.
* If any of the processes will not start - log-in and run the installation manual settings-memory-upgrade software.
* If some of the processes of updating the device hanging - wait 10 minutes then remove the battery. After 10 seconds, reinsert.
On my phone firmware write good. First run language is english, and you must manually configure APN.
any fixes???
Hi,
thank you very much for sharing this great news.
Anyway I would like to know if this new firmware is fixing the sdcard mount problem, the multitouch bug and the accelerometer.
Another thing: can you enter in pink screen mode with this new base-rom?
Regards,
kalo86
akalos said:
any fixes???
Click to expand...
Click to collapse
Unfortunately I no have information about any fixes.
Most likely, it`s the last firmware on 2.3, no more updates. OTA is not expected - install manually. About the ICS no any information yet.
First personal experience - a better camera and battery life. Still testing.
kalo86 said:
Hi,
Another thing: can you enter in pink screen mode with this new base-rom?
Regards,
kalo86
Click to expand...
Click to collapse
Yes, pink screen work normally. No have any mount, multitouch, accelerometer and proximity sensor problems yet.. little time has passed
FPS locked?
try neocore please
step 2 for what??
to large rom any way....
bobsido said:
Yes, pink screen work normally. No have any mount, multitouch, accelerometer and proximity sensor problems yet.. little time has passed
Click to expand...
Click to collapse
Thank you for the quick answer!
Since you are able to enter in pink screen mode, can you upload the original/stock boot.img?
I just extracted the rom from UPDATE_g.APP but I can only manage the system.img and the only way to extract the boot.img is the pink screen.
Thank you in advance!
akalos said:
FPS locked?
try neocore please
step 2 for what??
to large rom any way....
Click to expand...
Click to collapse
This is a clear original ROM, no patch or root. I make standard root procedure, it's work.
Sent from my U8800Pro using xda premium
kalo86 said:
Thank you for the quick answer!
Since you are able to enter in pink screen mode, can you upload the original/stock boot.img?
Click to expand...
Click to collapse
I do this tomorrow, too late
Sent from my U8800Pro using xda premium
B552 = B540 + Pink Screen Mode, nothing more
Ok, thank you always, but I flashed the update and copied the boot.img file through the pink screen.
The ROM has FPS limit and the compass mode in Google Maps Street View doesn't work, maybe with a reboot the compass mode will work fine.
The external sdcard is not correctly mounted after a full shutdown, so the bug persists still now.
The multitouch bug after the lockscreen is also in life...
Then I have a question: what did Huawei do on this new B552 base?
The only thing I see like a "news" is Google Music, nothing more.
I have a conclusion:
B552 = B540 + pink screen
Regards,
kalo86
downloading it now
tomorrow i will extract the zip and i will update to this stock firmware.
then i will copy the boot.img on my pc, i will extract the system.img from updata_g.app and i will cook the new version of my Countach
Hi Matteo,
yes, I did the same procedure, you can extract only system.img with dsixda kitchen, if you want boot.img you need to install with the dload folder procedure the original firmware and then put your U8800 Pro in pink screen mode.
If you trust in me, you can take my boot.img, it's the same of the original one but I only added root permission and init.d run-script.
Hoping to help, this is the file for you and other people:
kalo86 said:
Hi Matteo,
yes, I did the same procedure, you can extract only system.img with dsixda kitchen, if you want boot.img you need to install with the dload folder procedure the original firmware and then put your U8800 Pro in pink screen mode.
If you trust in me, you can take my boot.img, it's the same of the original one but I only added root permission and init.d run-script.
Hoping to help, this is the file for you and other people:
Click to expand...
Click to collapse
Thanks
Anyway i prefer to update to the official fw and then cook it because i want to analyse changes in this new fw.
Btw...i have looked for it on huawei site but i have not found it.
Inviato dal mio U8800Pro usando Tapatalk
recovery mode?
i just can't,volume +,power do nothing,after change recovery img with CWM Recovery 5.0.2.7
akalos said:
recovery mode?
i just can't,volume +,power do nothing,after change recovery img with CWM Recovery 5.0.2.7
Click to expand...
Click to collapse
just now replaces the original recovery.img file with attached, everything works fine, without any problems.
is ROOT for this ROM?
Just trying, but have many problems with install.
Format you sd card with windows 7 . FAT32.
SD formater is not working good for me.
just installed this official update. it is really similar to the B512 and B540.
already extracted boot.img and system.img, i have already cooked the Countach RC1. i will upload it tomorrow.
Ramucio said:
is ROOT for this ROM?
Just trying, but have many problems with install.
Format you sd card with windows 7 . FAT32.
SD formater is not working good for me.
Click to expand...
Click to collapse
Standard root:
1. Go to pink screen.
2. Replace original boot.img with patched, save original.
3. Reboot, wait when phone fully load .
4. Go to pink screen again and recover original boot.img, reboot.
5. When phone load wipe factory settings.
6. Done, your phone rooted.
For me it's work without problem.
Sent from my U8800Pro using xda premium
pure
on SD card make directory named "dload"
copy the UPDATE_g.APP into (approx 370 MB)
rename the UPDATE_g.APP to UPDATE.APP
update via SD card update (no pinkscreen), but if you want, use pinkscreen, it is the same
immediately after first reboot, pull out the battery, insert the batt. go to pinkscreen, delete the ****ty cust.img, reboot and continue with installation.
you will get pure gingerbread without any customizations (yes, there is the huawei launcher and beyond the sky theme, i like it)
for root, oc, use geno´s boot.img, for HDR edit the build.prop
if you like huawei´s boot animation, copy it to system/media folder (files bootanimation.zip and bootanimationex.zip)
step 2 and step 3 is not needed
Missed call problem exist? When someone want's to call he heards that you are unavailable/not on network or the phone is turned off.
Sent from my ragelis
Hi,
I have a problem with my P8 lite I bought today from some guy. It's stuck on boot logo, I tried wipe cache, factory reset, nothing helps. Tried fastboot, but my phone is locked in a nice green color. Can't unlock it since I don't know any numbers (IMEI, serial, firmware, etc), neither do I have the original package, so basically I'm stuck there. Tried the 3 button method with a 4Gb SD card and a "dload" folder on it with an "UPDATE.APP", still nothing, at 5% it says "Software update failed! Get help from ..... ". Maybe I'm doing something wrong? I watched some youtube videos and saw some guy putting the "dload" folder in the internal memory but since the phone is bricked I can't access it. Maybe that's the issue? Or do I have to use a card adapter instead of my old android phone for data transfers? Pardon my English, I'm more of a speaker than a writer. Any help will be appreciated.
Update: tried software b895(vodafone), now it said "incompatibility with current version" instead of "get help". Am I getting any closer?
Plikenz said:
Hi,
I have a problem with my P8 lite I bought today from some guy. It's stuck on boot logo, I tried wipe cache, factory reset, nothing helps. Tried fastboot, but my phone is locked in a nice green color. Can't unlock it since I don't know any numbers (IMEI, serial, firmware, etc), neither do I have the original package, so basically I'm stuck there. Tried the 3 button method with a 4Gb SD card and a "dload" folder on it with an "UPDATE.APP", still nothing, at 5% it says "Software update failed! Get help from ..... ". Maybe I'm doing something wrong? I watched some youtube videos and saw some guy putting the "dload" folder in the internal memory but since the phone is bricked I can't access it. Maybe that's the issue? Or do I have to use a card adapter instead of my old android phone for data transfers? Pardon my English, I'm more of a speaker than a writer. Any help will be appreciated.
Update: tried software b895(vodafone), now it said "incompatibility with current version" instead of "get help". Am I getting any closer?
Click to expand...
Click to collapse
FIrst you need the rollback ROM, after flash it then you can try a ROM
Google it
.
persona78 said:
FIrst you need the rollback ROM, after flash it then you can try a ROM
Google it
.
Click to expand...
Click to collapse
Tried it too, doesn't work. Gives me the same error. And "google it" isn't an answer, I wouldn't be here, thanks.
Plikenz said:
Tried it too, doesn't work. Gives me the same error. And "google it" isn't an answer, I wouldn't be here, thanks.
Click to expand...
Click to collapse
rollback rom fails to flash?
.
persona78 said:
rollback rom fails to flash?
.
Click to expand...
Click to collapse
If you're talking about downgrading, then yes, it fails... As far as I understand, it doesn't need downgrading. Now trying every single one of the firmwares .....
Plikenz said:
If you're talking about downgrading, then yes, it fails... As far as I understand, it doesn't need downgrading. Now trying every single one of the firmwares .....
Click to expand...
Click to collapse
The rollback rom just unlock your cust so you can flash some other rom...
Do you flash the update.zip or the update.app file?
.
persona78 said:
The rollback rom just unlock your cust so you can flash some other rom...
Do you flash the update.zip or the update.app file?
.
Click to expand...
Click to collapse
I tried UPDATE.APP, because if I get it right, UPDATE.ZIP is only flashable through TWRP, is that correct? I'm doing everything with the 3 button method, anything I try just fails. And upload to SD takes so long that I'm starting to lose patience... Maybe there's some custom ROM that can be flashed through UPDATE.APP? Maybe it's possible to make (convert) one? I'm new to this phone and I swear, this has got to be the most annoying phone ever... I've never encountered such problems with Samsung or Sony phones. Thank you for trying to help because I don't have a single clue of what is going on, since it just says "get help".... Yea, I'm trying to. What about the Vodafone firmwares, why is it telling me that the version is incompatible with my current software? Does it mean that I have to find another version of Vodafone firmware or that I have to use something other than that?
Plikenz said:
I tried UPDATE.APP, because if I get it right, UPDATE.ZIP is only flashable through TWRP, is that correct? I'm doing everything with the 3 button method, anything I try just fails. And upload to SD takes so long that I'm starting to lose patience... Maybe there's some custom ROM that can be flashed through UPDATE.APP? Maybe it's possible to make (convert) one? I'm new to this phone and I swear, this has got to be the most annoying phone ever... I've never encountered such problems with Samsung or Sony phones. Thank you for trying to help because I don't have a single clue of what is going on, since it just says "get help".... Yea, I'm trying to. What about the Vodafone firmwares, why is it telling me that the version is incompatible with my current software? Does it mean that I have to find another version of Vodafone firmware or that I have to use something other than that?
Click to expand...
Click to collapse
Wait!
The update.zip can be flash with the 3 keys to, only need to be in internal or external memory. Only need to delete the dload folder.
Try rollback update.zip, you need it to unlock cust.
Tell me if you made it.
.
persona78 said:
Wait!
The update.zip can be flash with the 3 keys to, only need to be in internal or external memory. Only need to delete the dload folder.
Try rollback update.zip, you need it to unlock cust.
Tell me if you made it.
.
Click to expand...
Click to collapse
Could you explain more thoroughly please? I tried changing UPDATE.APP extension to UPDATE.ZIP just by renaming the file, put it on a blank SD card (deleted dload folder), but no luck... I read somewhere that this phone could have had a custom firmware installed and that's why it won't budge? Is it possible for example to install TWRP or any custom firmware like AICP and etc. with this method? Then I wouldn't have any issues.
Plikenz said:
Could you explain more thoroughly please? I tried changing UPDATE.APP extension to UPDATE.ZIP just by renaming the file, put it on a blank SD card (deleted dload folder), but no luck... I read somewhere that this phone could have had a custom firmware installed and that's why it won't budge? Is it possible for example to install TWRP or any custom firmware like AICP and etc. with this method? Then I wouldn't have any issues.
Click to expand...
Click to collapse
Don't change the extension... Don't extract the update.app from the zip, just let the zip like it is and paste it into internal or external storage, is a flashebel zip and works like update.app.
.
persona78 said:
Don't change the extension... Don't extract the update.app from the zip, just let the zip like it is and paste it into internal or external storage, is a flashebel zip and works like update.app.
.
Click to expand...
Click to collapse
The contents of the zip file are usually a dload folder with some pdf and word files and something like that, so, I need to have just the update.app in the zip file?
Plikenz said:
The contents of the zip file are usually a dload folder with some pdf and word files and something like that, so, I need to have just the update.app in the zip file?
Click to expand...
Click to collapse
Hi!
Doesn´t have a META-INF folder inside the zip?
.
persona78 said:
Hi!
Doesn´t have a META-INF folder inside the zip?
.
Click to expand...
Click to collapse
Hi, no, it just has a dload folder and a pdf file for instructions. Do I need to rename the zip to update.zip with all of its inside contents or do I just put the update.app file in an archive?
Plikenz said:
Hi, no, it just has a dload folder and a pdf file for instructions. Do I need to rename the zip to update.zip with all of its inside contents or do I just put the update.app file in an archive?
Click to expand...
Click to collapse
If don't have mata-inf file is not a flash zip...
I will check it tomorrow, ok?
.
persona78 said:
If don't have mata-inf file is not a flash zip...
I will check it tomorrow, ok?
.
Click to expand...
Click to collapse
Okay, sure, thank you!
bump
Plikenz said:
bump
Click to expand...
Click to collapse
Link to the update.zip you're trying to flash please.
Grazmeister said:
Link to the update.zip you're trying to flash please.
Click to expand...
Click to collapse
Hi, I've tried alot of them, just googling and downloading everything that says "ALE-L21", eventhough I'm not even 100% sure about that. For example this one:
Huawei P8 Lite Rollback Package (ALE-L21 C900B500, Android 6.0 to Android 5.0
I don't think this is the right one, Update.app doesn't work, these zips don't work, persona78 mentioned something about META-INF folder, but I can't find a rollback package like that anywhere, I saw some firmwares with that folder inside but they don't seem to work. If I knew exactly what I need to find and do then there would be no problem at all.
Plikenz said:
Hi, I've tried alot of them, just googling and downloading everything that says "ALE-L21", eventhough I'm not even 100% sure about that. For example this one:
Huawei P8 Lite Rollback Package (ALE-L21 C900B500, Android 6.0 to Android 5.0
I don't think this is the right one, Update.app doesn't work, these zips don't work, persona78 mentioned something about META-INF folder, but I can't find a rollback package like that anywhere, I saw some firmwares with that folder inside but they don't seem to work. If I knew exactly what I need to find and do then there would be no problem at all.
Click to expand...
Click to collapse
You P8 Lite is dual-sim, correct?
If so, try this link https://forum.xda-developers.com/showpost.php?p=73230358&postcount=2
Put it on a folder inside the SD card:
1- Try creating a "dload" folder with just the update.app AND the update.zip
2- If you have space or with doesn't work, delete the previous and just put the update.app AND the update.zip in the SD CARD main folder.
Let us see if you have luck
Grazmeister said:
You P8 Lite is dual-sim, correct?
If so, try this link https://forum.xda-developers.com/showpost.php?p=73230358&postcount=2
Put it on a folder inside the SD card:
1- Try creating a "dload" folder with just the update.app AND the update.zip
2- If you have space or with doesn't work, delete the previous and just put the update.app AND the update.zip in the SD CARD main folder.
Let us see if you have luck
Click to expand...
Click to collapse
Yea, it is dual sim. The last time I tried b895 it said "incompatibility with current version". And the others just don't seem to work. But I will try once more the way you told me.
Hi guys, can anyone help me with the fota folder path? I mean where does it get downloaded , received pie update on 3gb model yesterday.
lanisshrup said:
Hi guys, can anyone help me with the fota folder path? I mean where does it get downloaded , received pie update on 3gb model yesterday.
Click to expand...
Click to collapse
Just download it and put it in internal storage not in any folder just place the zip file no need extract ( as far as i remember)
reboot
You'll get a notification about software update
Personally I'll suggest to unlock camera2api before upgrading as some people are saying it can't be done in pie
Abir legend said:
Just download it and put it in internal storage not in any folder just place the zip file no need extract ( as far as i remember)
reboot
You'll get a notification about software update
Personally I'll suggest to unlock camera2api before upgrading as some people are saying it can't be done in pie
Click to expand...
Click to collapse
Thanks Abir, but this isn't something I'm looking for.
I get proper notifications for updates .
Need the path where official fota zip gets download by default.
Do let me know if there's any path you're aware of.
lanisshrup said:
Need the path where official fota zip gets download by default.
Click to expand...
Click to collapse
If you're manually updating then it should be in download folder in your phone if not then
UL-ASUS_X00T-WW-16.2017.1903.050-user.zip
Copy this file name and search in es file explorer
If you got the update automatically then it'll be in system storage and can't be access without root
Abir legend said:
If you're manually updating then it should be in download folder in your phone if not then
UL-ASUS_X00T-WW-16.2017.1903.050-user.zip
Copy this file name and search in es file explorer
If you got the update automatically then it'll be in system storage and can't be access without root
Click to expand...
Click to collapse
Thanks this worked... Used fx file manager though.
So, where is it?
Delete