Hello guys,
I have problem. On my HTC HD2 was HSPL3 bootloader. I wanted to change it to official version, by using RUU Leo HTC WWE 1.66.405.2 Radio Signed 15.30.50.07U 2.06.51.07 Ship image on FAT32 2GB SD Card. When I was turned on bootloader it was starter downgrade, but then restarted with error.
Now when i start bootloader it shows this information:
RUUNBH
PB81100 HX-BC
SPL-3.03.0000
MicroP(LED) 0x05
MicroP(TOUCH) 0x30
Upgrade ROM code error
Please try again
USB
When I try downgrad again HTC shows Loading.. on grey screen and stay freezed.
When I try to setup HSPL3 again From my PC it "say":
CRITICAL ERROR
Flow: 00000005
Error code: 00000005
Description: Bad SPL version!
When i try to install ROM from PC it start flashing and phone restarts after 1% progress.
On PC I got error:
ERROR[294]: INVALID VENDER ID
On HTC:
Software update failed.
Please try again.
Have someone same problem. Can anyone helps fix it?
Don't know how to remove post. Problem will solved when I found correct version of ROM. After it was installed, I can install HSPL again.
Share your tutorial about this. Can Help others pers. who have the same problem
I have tried the problem
1)I want to remove HSPL to get my warranty back
2)I reset my phone during the downgrading process
3)I cant boot into WM!!!!ERROR show:
RUUNBH
PB81100 HX-BC
SPL-3.03.0000
MicroP(LED) 0x05
MicroP(TOUCH) 0x30
Upgrade ROM code error
Please try again4)Then I run HSPL3_PKG and PC shows
CRITICAL ERROR
Flow: 00000005
Error code: 00000005
Description: Bad SPL version!5)With some connection error, soon I got a error called like invalid device ID
6)SOLUTION!!!! FLASH THE STOCK ROM
7)RESULT: SPL 3.03
Fall back into Android and byebye WM
adamhonghong said:
I have tried the problem
1)I want to remove HSPL to get my warranty back
2)I reset my phone during the downgrading process
3)I cant boot into WM!!!!ERROR show:
RUUNBH
PB81100 HX-BC
SPL-3.03.0000
MicroP(LED) 0x05
MicroP(TOUCH) 0x30
Upgrade ROM code error
Please try again4)Then I run HSPL3_PKG and PC shows
CRITICAL ERROR
Flow: 00000005
Error code: 00000005
Description: Bad SPL version!5)With some connection error, soon I got a error called like invalid device ID
6)SOLUTION!!!! FLASH THE STOCK ROM
7)RESULT: SPL 3.03
Fall back into Android and byebye WM
Click to expand...
Click to collapse
i have the same problems, but i can`t flash the stock rom, it`s going to 1% then restart my phone. my phone its dead.
i would like to flash from sd card to wwe-3.14 rom stock rom, but its broken.
Hey jimbou42
You can try this method, i tried it and it worked for me and i had the same problem , may work for you:
1. Turn on the phone holding down the volume down key till you arrive at the bootloader screen.
2. Plug cable into phone and plug into your computer.
3. Flash a stock rom via the RUU method and the computer should recognise the phone without any errors and install a stock rom....try a WWE rom.
4. If you manage to get past the install and all goes well, run HSPL and from the HSPL menu you can restore or "remove" hslp by clicking on the other option in the dropdown box.
Hope that works for you!!
i have the same problem
Cant Restore HTC HD2
I've done almost everything to to my htc hd2 but still i cant restore it back to its stock rom, It's saying " error 294, Invalid Vender..
I also tried to flashing thru sd, renamed RUU_Signed_nbh with LEOIMG.nbh but it's stuck on "LOADING"..
Can someone please help me, please..
---------- Post added at 01:21 PM ---------- Previous post was at 01:08 PM ----------
Hi, are you able to fix your HTC HD2? can you please give the step by step process to fix mine.. Thank You
i guess you have to flash a stock rom that it is compatible with your phone.. first flash the compatible rom and then try to flash the downgraded hspl..
Hello, first sorry for weak English.
I have a HTC HD2 and installed Windows Phone 7.
Was working perfectly, but didn't like him and decided go back to WM 6.5.
I put a ROM with the name "leoimg.nbh" on my SD card and started my phone.
Gave an error in the installation and now my screen looks like this (screen in 4 colors)
PB81100 HX-BC
SPL-3.03.0000 XE
Microp (LED) 0x05
Microp (TOUTCH) 0x40
Upgrade ROM code error
Please try again
I connect the USB cable, and I try to install from Windows, but the installation stops at 1% and appears a "ERROR [294] sell Invalid ID"
My cell phone is European, and behind Vodafone says.
Do not know if it's useful, but the S/N is HT04SNW024 ...
Could someone help me??
What can I do?
try to put it in bootloader mode, then connect to your pc and flash back WM.
Note: http://forum.xda-developers.com/forumdisplay.php?f=980
chk out the above link for more instructions for HD2 WM.
good luck.
I also tried but always the error.
Tried by Task29, but for the installation stop in 4% showing ERROR [294] sell Invalid ID
in order to work this thing out, can you pm me with these details?:
windows 7 rom you flashed
windows 6.5 rom you decided to use after windows 7
your hspl version
some screen of the error (if you can do it, use a camera or whatever you can)
Sounds like you need to reload the original leo image for your euro hd2. The original rom must be loaded from your SD card. This will revert you back to the original bootloader. You will have to reload hspl after you have the original rom back on the device. Sounds like you loaded the wrong carrier rom.
hello,
got an hd2 with "upgrade rom code error please try again" message.
i've noticed that the phone has hspl 2.08 installed. tried to install magldr, but got only a black screen without options. tried to install several stock rom's, but without luck, i don't know the region and i don't find s/n, imei, etc. every stock rom installed stuck at 8-9%. i can remove hspl 2.08 and install spl 2.08, but that's all.... tried to install other radio, but i have only radio 2.15.50.14 and stuck on 96%. can't find other radios's, because on topic with radio's all links are to megaupload...
tried even to install custom rom, like "energy", installation goes well, but when restart vibrate 7 times and that's all.
what else can i do? tried switching os, computers, usb ports, usb cables, batteries, stooping all other apps on computers, but nothing helps!...
PLEASE HELP!....
it's not my first flash...
nobody?...
try reflashing the radio 2.15.50, or a CORRECT stock rom, but this time chill teh phone in teh freezer first, for about half an hour. try it a few times, , report back.
tried to reflash radio 2.15.50, but no luck, as i already told before... as for the correct stock rom: i don't know the imei or s/n. it's any method to find out?
imei will be on the regulation label under battery.
Trying the freezer trick as mentioned samsamuel is recommended as if boots fine while chilled you know it probably hardware failure in BGA
but after freezing i must wait to defreeze because of condens, right?
Put it in an air tight bag & put it in sensible location in fridge icebox for good 30 minutes then take it out & use it straight away before it warms up too much.
If it manages to boot or progress further than before you can assume heat related BGA failure.
I have actually done this & also had the HD2 laying on an ice pack while flashing/booting to keep temps down & prove mainboard hardware bad .
tried also freeze method, but no chance... all radio's that i tried stopped to 96-99%, as before freezing...
i have another hd2 that is working, can i try to make some gold card?
it is any possibility to install or change the radio? or, it's any software that say which radio i have installed on phone?
did gold card helps somehow?
one more question: tried to install a lot of radios (2.07, 2.08, 2.10, 2.11, 2.12, 2.14, 2.15) and a lot of stock rom, but the result is the same. it is possible to have a hd2 with 1024 ram? i don't know what to do else, really!...
strange thing, after task 29 i don't have on tri-color screen the message aboutupgrade error, but magldr won't install well (just black screen without options)
my guess is that its a hardware failure. used hd2's are cheap though, ad its fairly easy to get parts and there are a ton of video's that show you how to disassemble the phone and replace parts.
tried today something: installed hspl 2.08, task29, downgraded to spl 1.66, and then
-tried to install HTC HD2-RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.0 7U_2.06.51.07_Ship.exe, but got the error: 294 invalid vender id; also on the window from the utility got some number: OBI3-PC:45567-HUEbc568-PC:455670!
-tried to install RUU_Leo_HTC_WWE_EastEurope_1.66.479.2_Radio_15.32.50.07U_2.07.51.22_2_Signed_LEO_Ship.exe, but got the error: 294 invalid vender id; also on the window from the utility got some number: OBI3-PC:45567-HUEbc599-PC:455670!
-tried to install RUU_Leo_HTC_FRA_1.66.406.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship.exe, but got the error: 294 invalid vender id; also on the window from the utility got some number: OBI3-PC:45567-HUEbc76C:455670!
-tried to install RUU_Leo_HTC_ELL_1.66.482.1_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship.exe, but got the error: 294 invalid vender id; also on the window from the utility got some number: OBI3-PC:45567-HUEbcS9;PC:455670!
-tried to install RUU_Leo_HTC_NLD_1.66.404.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship.exe, but got the error: 294 invalid vender id; also on the window from the utility got some number: OBI3-PC:45567-HUEbcJ78-PC:455670!
very interesting!... do you know what that means?
klinutzu said:
tried today something: installed hspl 2.08, task29, downgraded to spl 1.66, and then
-tried to install HTC HD2-RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.0 7U_2.06.51.07_Ship.exe, but got the error: 294 invalid vender id; also on the window from the utility got some number: OBI3-PC:45567-HUEbc568-PC:455670!
-tried to install RUU_Leo_HTC_WWE_EastEurope_1.66.479.2_Radio_15.32.50.07U_2.07.51.22_2_Signed_LEO_Ship.exe, but got the error: 294 invalid vender id; also on the window from the utility got some number: OBI3-PC:45567-HUEbc599-PC:455670!
-tried to install RUU_Leo_HTC_FRA_1.66.406.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship.exe, but got the error: 294 invalid vender id; also on the window from the utility got some number: OBI3-PC:45567-HUEbc76C:455670!
-tried to install RUU_Leo_HTC_ELL_1.66.482.1_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship.exe, but got the error: 294 invalid vender id; also on the window from the utility got some number: OBI3-PC:45567-HUEbcS9;PC:455670!
-tried to install RUU_Leo_HTC_NLD_1.66.404.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship.exe, but got the error: 294 invalid vender id; also on the window from the utility got some number: OBI3-PC:45567-HUEbcJ78-PC:455670!
very interesting!... do you know what that means?
Click to expand...
Click to collapse
yes, it means none of those roms are accepted because they don't match the vendor and/or region that the phone was released to, and it also means that you don't have HSPL installed, otherwise it would skip checking the vendor id.
OR
it could mean your ID is damaged, , , in bootloader (stripey screen) type EXACTLY what every line says.
Also, when you say 'installed hspl 2.08' you arent telling us teh usefull information, , , 2,08 can refer to 2.08.0000 or 2.08.hspl, , which is it? because one is hspl, one isnt.
ok, i saw that with hspl i can change between spl 1.42.0000 - 3.03.000 and 1.42.hspl - 3.03.hspl.
right now, as i mentioned, i have installed 1.42.0000 and tried several roms, but all of them stop at 1% and restart the device.
when on 1.xx.hspl or 2.08.hspl, goes to 8-10% and error (the bar become red).
on the tri-color it says:
PB81100 HX-BC
SPL-1.42.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
and serial or usb, depending on cable in or out.
one more thing: when i try to task 29 it shows me that it have 1.66.405.2 ?!?!?!?!
magldr no longer wants to install or i can't see this: even if the installer say done, it not appear after tri-color....
it seems i don't have the proper radio, but tried a lot of radio's and none will install; unfortunately can't install stock rom as i don't know imei, s/n or something else... all radio's failed at 96% or 99%!...
can someone tell me step-by-step what to do , i feel i've forgot something or do something wrong...
p.s.: i almost quit! i will send my phone to someone who knows to jtag...
when the spl ends .0000 you CANNOT task 29, flash radios, flash roms (except the correct stock rom only), cant flash magldr, nothing at all.
It sounds to me like you have what i call a stuck radio, which basically flashes at 8%-10%, which is why the process is hanging there, or at 97%-99% when flashing only a radio.
Problem is all you can do is try the freezer trick, again and again, preferably using the CORRECT stock rom, , flashing from sd card (you can make a goldcard, that may help)
heres what id do.(assuming it ISNT a t mobile us phone ((green send key))
1 use hspl2 to set 1.66.0000
2 get my correct stock rom and load the nbh to sd card ready to flash, an sd card 4gb or smaller, no ext partitions or anything, just for simplicity.
3 id freeze the heck outa the phone, and try flashing it, then id try again, and again, freezing as necessary.
if after 20 or so attempts, id try it with a different version correct stock rom if i could find one.
failing that, id make the sd card a goldcard (2gb cards are best) and try it all again.
if all that fails, id cry a bit and give up.
i know the differences between .0000 and hspl!... ok, what if a tmous? with 3.03hspl seems that radio 2.08.50.05 charge at 99.9% (bar remain green at 100%, but a mark is near bar and error message got to the cutom ruu app.
the problem is that i don't know if my mainboard is EU or TMOUS, as i buyed only the mainboard and don't have any label, stamp or something else.... thats why i don't know the correct rom, the correct radio.
i have also an other hd2, which works. can i use it to make a goldcard and try to use the image to the faulty hd2? it is possible to erase everything on the faulty hd2 and install the image from the good one hd2 with goldcard method??
one last thought: i have an other hd2 motherboard with some trouble to the touch (it is a mb with sim slot changed, but unsuccessful repair and touch won't work anymore). successful installed on this mb magldr and wp7.
now, it is possible to take the nand chipset from the mb with touch fault and put on the mb which don't want to install nothing - NAND physically replacement? it will work? please answer me.
klinutzu said:
the problem is that i don't know if my mainboard is EU or TMOUS, as i buyed only the mainboard and don't have any label, stamp or something else.... thats why i don't know the correct rom, the correct radio.
Click to expand...
Click to collapse
TMOUS board is a little longer on bottom edge than the EU one & does not straight fit in EU housing.
Hi everybody,
I have installed on my vodafone SFR htc trophy, RSPL and then HSPL, after that i tried to install some cooked roms by ansar, after the flash process the phone did reboot to stuck in a black screen, pulling out the battery and placing in again the phone now stuck in the bootloader and went from being PC40100 as a Model ID to be like:
SPAR100 SS-BC (4K)
HSPL-1.10.2250.1(112663)
MicroP(LED) 0x09
Touch A1(v10,20)
and everytime i try to install any firmware even the phone's original stock ones i get the error INVALID MODEL ID [244], i've tried also to flash it using a Y-cable and a Goldcard and when i plug the micro usb cable in the phone while this later in the USB HOST MODE the phone stuck forever in CHECKING.., anybody has any idea how to fix this SPAR100 bootloader problem? thanks in advance.
--------------------------------------------------------------update-----------------------------------------------------
it did work the hex editing and i could bypass the invalid model id error, but now i'm stuck in the [266] error every time i try to install some stock firmware, and i get Radio Update Fail when trying it using the Y-cable, and when flashing a custom rom the flash process goes well until the phone reboots to stuck in htc logo with the 7 vibrates, and searching the [266] error they said about it, it caused when flashing a custom rom that erases a partition the stock firmwares use to install their bloatware so i'm trying more custom roms hopping that one of them finally successfully boots the phone, have you any idea what could be done to bypass the [266] error?
yakie47 said:
Hi everybody,
I have installed on my vodafone SFR htc trophy, RSPL and then HSPL, after that i tried to install some cooked roms by ansar, after the flash process the phone did reboot to stuck in a black screen, pulling out the battery and placing in again the phone now stuck in the bootloader and went from being PC40100 as a Model ID to be like:
SPAR100 SS-BC (4K)
HSPL-1.10.2250.1(112663)
MicroP(LED) 0x09
Touch A1(v10,20)
and everytime i try to install any firmware even the phone's original stock ones i get the error INVALID MODEL ID [244], i've tried also to flash it using a Y-cable and a Goldcard and when i plug the micro usb cable in the phone while this later in the USB HOST MODE the phone stuck forever in CHECKING.., anybody has any idea how to fix this SPAR100 bootloader problem? thanks in advance.
Click to expand...
Click to collapse
Sounds like you flashed the HSPL for the Verizon version of the trophy. The Spar100 is a name change so as not to flash roms not specific to the Verizon Trophy. All you should have to do is revert back to OSPL using the HSPL software which should allow you to flash a stock rom. See this post for more info http://forum.xda-developers.com/showthread.php?t=1195647. Hope this helps!!!
tonbonz said:
Sounds like you flashed the HSPL for the Verizon version of the trophy. The Spar100 is a name change so as not to flash roms not specific to the Verizon Trophy. All you should have to do is revert back to OSPL using the HSPL software which should allow you to flash a stock rom. See this post for more info http://forum.xda-developers.com/showthread.php?t=1195647. Hope this helps!!!
Click to expand...
Click to collapse
thanks man for your replay, but that's what i get every time i try to revert back to OSPL using DFT RSPL HSPL tool:
-------------------------------------------------------------
[Error Description]:
Invalid ModelID. This means that your phone not supported.
This installer supports only limited number of the phones.
SPARK, MOZART, MONDRIAN, GOLD, SCHUBERT.
If you have phone from this list, but still have this error, please contact with DFT team.
[Info]: USBWorkHSPL.cpp (301)
[Error Description]:
ModelID is 'SPAR1000'. Please report this info to DFT.
---------------------------------------------------------------
any idea how to change that SPAR100 to PC401000?
yakie47 said:
thanks man for your replay, but that's what i get every time i try to revert back to OSPL using DFT RSPL HSPL tool:
-------------------------------------------------------------
[Error Description]:
Invalid ModelID. This means that your phone not supported.
This installer supports only limited number of the phones.
SPARK, MOZART, MONDRIAN, GOLD, SCHUBERT.
If you have phone from this list, but still have this error, please contact with DFT team.
[Info]: USBWorkHSPL.cpp (301)
[Error Description]:
ModelID is 'SPAR1000'. Please report this info to DFT.
---------------------------------------------------------------
any idea how to change that SPAR100 to PC401000?
Click to expand...
Click to collapse
Honestly I don't but if it's a matter of just getting a rom on the phone you can change the model ID in the signed .nbh file to SPAR10000 using a hex editing tool and it should flash. Is it SPAR10000 or SPAW10000? My Verizon Trophy changes to SPAW10000. Regardless, the model ID is right there on the 4th line in the hex editor. Beyond that PM'ing one of the dev's, Cotulla or mwang from DFT, would be your best bet. Since the arrival of WP8 the experts seems to have abandoned this forum and it's just us noobs :silly: Sorry!!!
The bootloader will show 4 characters and only the first 4 numbers of the model ID, like SPAR1000 or P0401000. If you do use the hex editor only change the first 4 but leave remaining numbers as they are.
tonbonz said:
Honestly I don't but if it's a matter of just getting a rom on the phone you can change the model ID in the signed .nbh file to SPAR10000 using a hex editing tool and it should flash. Is it SPAR10000 or SPAW10000? My Verizon Trophy changes to SPAW10000. Regardless, the model ID is right there on the 4th line in the hex editor. Beyond that PM'ing one of the dev's, Cotulla or mwang from DFT, would be your best bet. Since the arrival of WP8 the experts seems to have abandoned this forum and it's just us noobs :silly: Sorry!!!
The bootloader will show 4 characters and only the first 4 numbers of the model ID, like SPAR1000 or P0401000. If you do use the hex editor only change the first 4 but leave remaining numbers as they are.
Click to expand...
Click to collapse
man i really appreciate for you your care, i had read about the hex editing in the DFT team's chines forum concerning the same issue i'm facing, and since i don't understand chines it remained not that clear for me what should be hex edited in the .nbh file, and now as you have shaded some light about it i'll give it a try,
I've already tried to PM some developers out there but they don't respond, may be too busy to do so..., anyway i'll try the hex editing thing and i'll let you know the result.
thanks.