[Q] HOW to Flash Orange SPL 1.12 - Touch HD General

Hi Guys,
I cant find a solution how can i falsh my Blackstone. I found out i have to use Hard SPL. But when i downloaded it i get RUU Error [294] : INVALID VENDOR ID. I unlocked this phone alreay with buying code online and it seems to work fine with T-Mobile CZ sim card.
this is my boot loader:
BLAC100 32M
SPL-1.12.0000
MicroP-BlackStone (LED) v6
Im totaly new to flashing and ROMS. Can any kind person give me some advices?
Thanx in advance!

You could try starting here http://forum.xda-developers.com/showthread.php?t=505377
This is where we all "got going" Steep learning curve but worth it

I found that, but its mentioning "flashing 1.56+ roms". Thats no problem? I have 1.12

Related

Bootloader... But nothing else!

Hi guys,
my Orbit failed in the middle of a flash (in Windows with RomUpdateUtility).
Now I can only get to the bootloader, nothing else.
I think the CID unlock must have failed somehow, because using the SDcard method I cannot flash any cooked ROM. In fact I cannot flash ANY ROM now! I have tried the default shipped 02 ROM's but they all fail at 5% in RomUpdateUtility.exe thru windows, and also fail via the SDcard method (it sits there forever saying reading SD card).
Any ideas? Any other O2 ROM's I should try? Or can I send it for repair to any one off this forum? Should I bin it, maybe the flash chip is faulty?
IPL 1.25.0001
SPL 1.25.0000
Tried (and failed) ROM list:
HTC_P3300_WWE_3.13.405.1_4.1.13.44_02.94.90_Ship_R.exe
RUU_Artemis_O2_UK_3.4.206.2_4.1.13.28_02.67.90_Ship.exe
HTC P3300_SPA_3.13.412.1_4.1.13.44_02.94.90_Ship_R.exe g
Arteimg.nbh from http://rapidshare.com/files/41614347/OrbitO2UK.rar
art_htcwwe_11240501_026790_wwe_ship from http://www.expansys.com/ft.aspx?k=79618
Vanilla 4.01
Black & Blue 5.0
Thanks for reading, underzone
I have the exact same problem only mine is stuck with IPL 3.04.0001 and SPL 3.04.0000
When i try the original rom (o2 factory) it goes at 4% into Error 226 (something with the Extrom), any other rom wont work since no USPL... damn it.
Any Ideas on this?

Update error - help please

Last night i tried to update rom on my HTC touch HD and since then it is only on boot screen... i says
RUUNBH
BLAC100 32M
SPL-1.54.0000
MicroP-Blackstone (LED) v6
Upgrade ROM code error
please try again
and then if i put the rom on my SD card i try to update it
it says LOADING..... Checking... NOT ALLOW error 00028002.
I was trying to upgrade to stock rom, but i can not find the right one..
My phone serial number is HT93LKD00115.
if anyone knows stock rom for this device.. please help...
Deni_N said:
Last night i tried to update rom on my HTC touch HD and since then it is only on boot screen... i says
RUUNBH
BLAC100 32M
SPL-1.54.0000
MicroP-Blackstone (LED) v6
Upgrade ROM code error
please try again
and then if i put the rom on my SD card i try to update it
it says LOADING..... Checking... NOT ALLOW error 00028002.
I was trying to upgrade to stock rom, but i can not find the right one..
My phone serial number is HT93LKD00115.
if anyone knows stock rom for this device.. please help...
Click to expand...
Click to collapse
You need to use either USPL or HSPL to flash a rom, follow this guide and you'll be fine, and post further flashing queries within that thread.
Thread closed

stuck on bootloader screen

Hi,
I have tried to flash a wiza200 that was already flashed with a manila rom, I checked that it is a G4. I used TNT.20273 Professional Wizard HTC Home FREE ROM, it seems to work , romupdate utility indicated that the device was flashed successfully but it reboots on bootloader screen. I tried to reflash it it gave the same result, I tried another rom but impossible to flash it with other roms. So I downloaded the official one from the operator O2 but I got "invalid vendor" message. I searched all the possible solutions but none of them worked( wizard love also). Is there a savior here ? someone who can give me the right procedure to follow.
initially the IPL was 2.21.0001 and spl 2.21 Olipr
now the IPL is 2.21.0001 and spl 2.21
Thanks
Best regards.
You must replace the Update.exe with a MaUpgradeUT_NoID.exe . Found here in Forum . Look in "Blue Angel" for it. Be sure that you flash the right ROM with it . It will no ask...

Pleasee, help me, please help me

My Gene (older Gene) had this configuration:
ONBL 1.11.0000
SPL 1.10.Olip
It worked very well with WM6.5
But when I downloaded the orefkov spl to unlock it will not turn over and just enter bootloader mode
Now this:
ONBL: 1.11.0000
SPL: 1.07.Oref
Please help me, I do not know what to do
Everytime I try to install the new rom, even as a unique, does not work and displays the error 300 in ROM Update Utility
Help me
please!!
I redid all the method described by Orefkov
I tried several roms, but when it comes time to write the rom on the device, is at 0% and the RUU gives error 300
I do not know what else to do.
This happened after I try to unlock CID.
Somebody help me, please, this phone is not mine.
Show me some topic, whatever.
I also tried the method to make it boot from the SD CARD, but I could not make it work, maybe cuz this is the old gene.
Help me ..... please!

[Q] Htc Trophy Need Help

Hi everyone
I'm having a problem with my htc Trophy,when I try to do HSPL always I'm getting this information:
[Error Description]:
Invalid ModelID. This means that your phone not supported.
This installer supports only limited number of the phones.
SPARK, MOZART, MONDRIAN, GOLD, SCHUBERT.
If you have phone from this list, but still have this error, please contact with DFT team.
[Info]: USBWorkRSPL.cpp (235)
[Error Description]:
ModelID is 'SPAR1000'. Please report this info to DFT.
[Info]: USBWorkRSPL.cpp (234)
At this moment phone stuck in HTC logo and can't go any further.
My Model id is: PC40100
My bootloader says:
SPAR100 SS-BC (4K)
SPL-1.10.2250.1(112663)
MicroP(LED) 0x09
Touch A1(v10,20)
SD SANDISK 75800MB Class0
Partition Info-v211v413
I don't know even which ship rom I could install,because I try few of original one,and always i get information: INVALID VENDOR ID
I would be grateful for any help.
First you need to start RSPL, chose your SPL, reboot to RSPL and then start flashing HSPL. Thats all...
I did choose first RSPL and get same error
setings
about
more info
write FIRMWARE REVISION NUMBER
you might need goldcard to unbrand your Trophy
Phone just hang at HTC logo,so I'm unable to check Firmware Revision Number
Maybe it helps when I provide my P/N 99HKM001-00
http://forum.xda-developers.com/showthread.php?t=892601
this is how to unbrand your phone... after that flash(RUU_Spark_HTC_Europe_1.10.401.04_Spark_5.52.09_RELEASE) you can flash HSPL
Thanks for help,is working on my friend Trophy,but not on my one,so maybe is totally bricked,anyway thanks for help
I'm not giving up that easy ... you should install Windows Phone 7 Support Tools and follow what program asks from you... It suppose to have options to restore your OS... should try that too before quiting
or you should try HTC Asia rom... not over 1.20 SPL

Categories

Resources