Related
Hi all ^^
I'm new here, and I just received my HD2 and wanted to flash it with one of the cool ROMs you have on this forum.
I flashed the HSPL with HSPL2 and everything went smoothly. Then I downloaded one of CleanEX DSE Core Rom (the 6.5 Maniless FRE) to be precise.
I flashed it, all was good, at the end the phone rebooted and i was stuck at the boot screen written "HTC CleanEX UDT DsE Series". I thought maybe it was because I didn't do a hard reset yet. So i did one, everything initialyze and when it's done same thing, the phone reboot and I'm stuck at the same boot screen...
I'm starting to get a bit stressed out because if I can't connect to Activesync I can't even put an original Rom or an other twinked one ><
Does anybody know what I did wrong or why it's not working ?
Thanks in advance for your answers.
PS: My phone is a french phone.
radio - go back and reread that roms thread for recommendation, however 2.07.50.x or higher should do it.
boot to bootloader, connect usb, flash radio, phone will now boot
Connect your phone to PC and turn it on while holding volume down, bootloader menu should apear (red,green,blue,white) then you can run Rom flashing tool on your PC
but i recomend flashing newer RADIO because this may be the reason for your current issue.
That was a really quick and effective answer !!
Thanks a lot to both of you !!!! *hugs*
its seriously the radio
DN41
I tried to install HSPL but unfotunately it stops & my phone is not working. My HD2 hangs when HTC logo comes. I also try to copy stock ROM in SD card whilst pressing voldown & power keys, tricolour screen appeared & says:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x40
Then the phone hangs.
Could anyone tell me what is ROM flashing tool & what version should I install.
Please help me.
smrazi said:
I tried to install HSPL but unfotunately it stops & my phone is not working. My HD2 hangs when HTC logo comes. I also try to copy stock ROM in SD card whilst pressing voldown & power keys, tricolour screen appeared & says:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x40
Then the phone hangs.
Could anyone tell me what is ROM flashing tool & what version should I install.
Please help me.
Click to expand...
Click to collapse
are you flashing the ROM on a different micro sd card? you cant use a 8GB or 16GB. Try a smaller card like a 1GB or 2GB.
also rename the stock ROM to LEOIMG.nbh.
put that ROM file on a smaller card and go into bootloader should come right up. worked for me when i had to re-install stock to return defective unit.
Hello guys,
I have problem. On my HTC HD2 was HSPL3 bootloader. I wanted to change it to official version, by using RUU Leo HTC WWE 1.66.405.2 Radio Signed 15.30.50.07U 2.06.51.07 Ship image on FAT32 2GB SD Card. When I was turned on bootloader it was starter downgrade, but then restarted with error.
Now when i start bootloader it shows this information:
RUUNBH
PB81100 HX-BC
SPL-3.03.0000
MicroP(LED) 0x05
MicroP(TOUCH) 0x30
Upgrade ROM code error
Please try again
USB
When I try downgrad again HTC shows Loading.. on grey screen and stay freezed.
When I try to setup HSPL3 again From my PC it "say":
CRITICAL ERROR
Flow: 00000005
Error code: 00000005
Description: Bad SPL version!
When i try to install ROM from PC it start flashing and phone restarts after 1% progress.
On PC I got error:
ERROR[294]: INVALID VENDER ID
On HTC:
Software update failed.
Please try again.
Have someone same problem. Can anyone helps fix it?
Don't know how to remove post. Problem will solved when I found correct version of ROM. After it was installed, I can install HSPL again.
Share your tutorial about this. Can Help others pers. who have the same problem
I have tried the problem
1)I want to remove HSPL to get my warranty back
2)I reset my phone during the downgrading process
3)I cant boot into WM!!!!ERROR show:
RUUNBH
PB81100 HX-BC
SPL-3.03.0000
MicroP(LED) 0x05
MicroP(TOUCH) 0x30
Upgrade ROM code error
Please try again4)Then I run HSPL3_PKG and PC shows
CRITICAL ERROR
Flow: 00000005
Error code: 00000005
Description: Bad SPL version!5)With some connection error, soon I got a error called like invalid device ID
6)SOLUTION!!!! FLASH THE STOCK ROM
7)RESULT: SPL 3.03
Fall back into Android and byebye WM
adamhonghong said:
I have tried the problem
1)I want to remove HSPL to get my warranty back
2)I reset my phone during the downgrading process
3)I cant boot into WM!!!!ERROR show:
RUUNBH
PB81100 HX-BC
SPL-3.03.0000
MicroP(LED) 0x05
MicroP(TOUCH) 0x30
Upgrade ROM code error
Please try again4)Then I run HSPL3_PKG and PC shows
CRITICAL ERROR
Flow: 00000005
Error code: 00000005
Description: Bad SPL version!5)With some connection error, soon I got a error called like invalid device ID
6)SOLUTION!!!! FLASH THE STOCK ROM
7)RESULT: SPL 3.03
Fall back into Android and byebye WM
Click to expand...
Click to collapse
i have the same problems, but i can`t flash the stock rom, it`s going to 1% then restart my phone. my phone its dead.
i would like to flash from sd card to wwe-3.14 rom stock rom, but its broken.
Hey jimbou42
You can try this method, i tried it and it worked for me and i had the same problem , may work for you:
1. Turn on the phone holding down the volume down key till you arrive at the bootloader screen.
2. Plug cable into phone and plug into your computer.
3. Flash a stock rom via the RUU method and the computer should recognise the phone without any errors and install a stock rom....try a WWE rom.
4. If you manage to get past the install and all goes well, run HSPL and from the HSPL menu you can restore or "remove" hslp by clicking on the other option in the dropdown box.
Hope that works for you!!
i have the same problem
Cant Restore HTC HD2
I've done almost everything to to my htc hd2 but still i cant restore it back to its stock rom, It's saying " error 294, Invalid Vender..
I also tried to flashing thru sd, renamed RUU_Signed_nbh with LEOIMG.nbh but it's stuck on "LOADING"..
Can someone please help me, please..
---------- Post added at 01:21 PM ---------- Previous post was at 01:08 PM ----------
Hi, are you able to fix your HTC HD2? can you please give the step by step process to fix mine.. Thank You
i guess you have to flash a stock rom that it is compatible with your phone.. first flash the compatible rom and then try to flash the downgraded hspl..
Ever since I went to wp7 and back to android, my amazing hd2 has never been the same since. For weeks I have had freezing, so wanted to get a clean slate and start over. I did the following
Task29
Magldr 1.3
wanted to install nexushd2 so had to install
CWM_Recovery_for_NexusHD2_135M
it crashed towards the end of the install, ok I try to go back to magldr...but even tho I hold the button I dont get the options. I try it all again...same problem. I heard going back to stock 3.14 will fix most problems...it also hangs but at 8%?
Its now 6am and I need sleep...can anybody help...I really need a phone for tomorrow.
Thanks in advance
PS - Currently
PB81100 HX-BC
SPL-2.08.HSPL 8G EX
0X45
0X40
CotuallaHSPL
RUUNBH
Upgraed ROM code error, Please try again
Is that ok?
I got a quick question, did you reformat your SD card after you removed Windows Phone 7? If not this is probably your pro.lemons as WP7 cormates your card in a funky way so the phone tvinls the SD card is the enternal memory, I forget what it is called. But this is the same in WP7 native devices as they actually use SD card for memory and not enternal chips.
The best way to do this is to either vet an adapter and put your card in a digital camera and format it. Then reformat it again to Fat with your computer. Are you can just use your computer, but I suggest the digital camera as it will 100% remove the funky format.
Go into bootloader and flash a correct stock rom from USB. If it doesn't take confirm it's correct for your phone and try again.
sticking at 8% means a problem with installing the radio.
Put it in a plastic bag and pop it in the fridge for 30 minutes. remove and reflash.
I would recommend extracting the 3.14 installation file (using winrar).
Rename the RUU_signed.nbh to 'LEOIMG.nbh'.
Copy this file into the root of your SD Card, and pop the card in the phone.
Boot the phone whilst holding in the volume down button and let it flash.
If cooling the phone helped, send it back under warranty (you have got rid of HSPL, so all is good now.
I got mircosdhc to usb today, copied LEOIMG.NBH to sd, tried to flash but getting 28002 error not allowed
i then throws me back to spl 1.42
I have tried both 3.14 and 1.66 official roms...both sdflash and romupdateutility.
When I try sdflash with leoimg.nbg it gets to 1% then shuts down.
Is my hd2 dead? it doesnt even get orange led charge :-/
Tri colour screen now says
hx-bc
spl 1.42.0000 xe
micro (led) 0x05
microP(TOUCH) 0X40
Is that ok, I dont remember if being that
update
cant flash radios either, shows the progress bar then restarts.
I tried :
2.15.50.14
Gutted, its my best phone ever
hmm, quite a rash of stuck radios this past week or so, , hardware coming to the end of its flashable life?
@OP, some people are recommending (myself included it seems, by passing it on) chilling the phone in a sealed bag in fridge freezer, no sim no sd, then when its cool, put sd in and try to flash real quick, try a few times, keeping it sealed and cool.
Aparently the theory is that the hardware is overheating, and the cooling lets it work well enough for a little while.
There are one or two what look like success stories, it has to be said, but i wouldn't put a bet on it myself just yet.
Good luck.
(oh and i wouldnt put the phone in the bag in a warm room either, , take it outside for a while first, let it be cool before it goes in teh bag, less chance of condensation.)
It doesnt look good...either get a black screen with a triangle!
or if I get into the tri colour bootloader it says:
upgrade rom code error please try again
everytime i try flash a radio it goes either 0% or 8% reboots phone.
I wish I stayed on sd...never had any problems ever...ever since win7 my phone hasnt been the same.
Any more advice or links would be great, keep em coming. I dont want to give up on my hd2 just yet...Im mean its still (imo) one of the best android phones about
@ samsamuel
I cant flash via sd...keeps giving me
upgrade rom code error please try again
should i change my spl or something? its currently:
hx-bc
spl 1.42.0000 xe
micro (led) 0x05
microP(TOUCH) 0X40
do you know if that is ok?
this might be overstating an obvious that you've thought of, but are you sure you are using the correct stock ROM for your region? Have you tried flashing a custom ROM just to see what happens?
fracmo2000 said:
@ samsamuel
I cant flash via sd...keeps giving me
upgrade rom code error please try again
should i change my spl or something? its currently:
hx-bc
spl 1.42.0000 xe
micro (led) 0x05
microP(TOUCH) 0X40
do you know if that is ok?
Click to expand...
Click to collapse
flash back to hspl 3 and try again,if no succes ur bootloader is damaged and that will be problem
fracmo2000 said:
@ samsamuel
I cant flash via sd...keeps giving me
upgrade rom code error please try again
should i change my spl or something? its currently:
hx-bc
spl 1.42.0000 xe
micro (led) 0x05
microP(TOUCH) 0X40
do you know if that is ok?
Click to expand...
Click to collapse
that would be a stock spl then,, and with the rom update error, that means you have flashed the wrong stock rom from sd card. It has removed hspl, then the flash failed because you had (have) stock 1.42.0000 spl.
enter bootloader - usb - hspl4 - 2.08.hspl HSPL not 0000 - into bootloader again, has the spl changed? if not, then flashing is stuck, and you are in the stuck radio situation, if it HAS changed, now try flashing a rom or radio, , , flash from usb, see what happens.
orangekid said:
this might be overstating an obvious that you've thought of, but are you sure you are using the correct stock ROM for your region? Have you tried flashing a custom ROM just to see what happens?
Click to expand...
Click to collapse
not at all, keep me coming...I honestly dont see any other phone just now that I want (in the uk at least)...maybe the artrix but thats not for a few months...so need to get this baby back working!
I tried both 1.66 and 3.14 wwe (i couldnt see a uk one...
_HTC HD2_RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
Are they ok?
You could go to HTC's website, and search for HD2, and then go to downloads, and try downloading the newest rom that the site offers. You need to enter your serial number which is located under the battery. With some luck you will end up having a shipped rom, which has the same cid as your phone, and you will then be able to flash your phone via usb cable (from the tricolor screen).
If for some reason the HTC website won't accept your srial number, try to select another country from the top right part of the website.
I live in Serbia, and the Serbian HTC page has no rom downloads for HD2, the International page won't accept my serial, but the polish page did accept it. So keep trying, until the webpage accepts your sn.
If you are in no luck, you could try downloading roms from http://www.shipped-roms.com/.
Hope you will succeed in your quest to resurrect your phone.
Best of luck
d3m0n
d3m0n1 said:
You could go to HTC's website, and search for HD2, and then go to downloads, and try downloading the newest rom that the site offers. You need to enter your serial number which is located under the battery. With some luck you will end up having a shipped rom, which has the same cid as your phone, and you will then be able to flash your phone via usb cable (from the tricolor screen).
If for some reason the HTC website won't accept your srial number, try to select another country from the top right part of the website.
I live in Serbia, and the Serbian HTC page has no rom downloads for HD2, the International page won't accept my serial, but the polish page did accept it. So keep trying, until the webpage accepts your sn.
If you are in no luck, you could try downloading roms from http://www.shipped-roms.com/.
Hope you will succeed in your quest to resurrect your phone.
Best of luck
d3m0n
Click to expand...
Click to collapse
Ha, funny you should say mention that about HTCs site...but my S/N didnt work either. I wasnt sure if it was something to do with me/my phone or just the site was rubbish!
Im currently downloading an o2 rom frmo shippedroms (great site, thanks) so all my fingers and toes are crossed.
Funny thing is, I can flash hspl and hspl2, I managed to flash radio but not rom...keeps rebooting.
Did u take out sim and SD and try flashing?
@samsamuel
Well, I managed to get hspl4 on ok (2.08hspl) and then flashed a win6.5 rom it worked...but doesnt boot (stuck at flash screen)
When I downloaded official roms from both htc and shippedroms...they are corrupt. I used winrar, 7zip and tried to just run the packaged exe file...doesnt open.
Can anybody help me test these files and see if its me or have a good office rom they can upload?
@milli
when i managed to get an win6.5 rom flashed, sd was in, sim was out (i used hspl usb flash method)
EDIT - Found some o2 shipped roms on xda...extracted and going to try usb flash via hspl4
well i can flash radios and roms via hspl4 usb flash method AND usb via pc...but still cannot boot. Stuck at inital splash screen.
Any ideas now? We have made progress
edit - i have tried both custom roms and shipped o2 (uk) roms
Did you try hard reset after you'd flashed the rom(s)??
tried it once or twice, but not everytime. redownloading another rom
RUU_Le2_UK_1.43.206.4_Radio_Signed_15.26.50.07U_2.04.50.22_2_Ship_WORKING.exe (191,374 KB)
i hope this works...im getting desperate. Im still unsure at whats went wrong. Is it something wrong with my nand memory?
I can now flash radio, roms but yet cannot boot (Stuck at white htc splash...the red text sometimes appears...sometimes it doesnt).
edit - that rom failed to flash
My HTC HD2 doesn't pass the white-green HTC screen anymore. I am able to flash it (when I flashed HSPL it said We hacked it) but still not able to go through the HTC screen. I tried flashing an original WM6 ROM, but the device still hangs at the HTC screen...
Can anyone help me? Is my phone bricked?
bartjakobs said:
My HTC HD2 doesn't pass the white-green HTC screen anymore. I am able to flash it (when I flashed HSPL it said We hacked it) but still not able to go through the HTC screen. I tried flashing an original WM6 ROM, but the device still hangs at the HTC screen...
Can anyone help me? Is my phone bricked?
Click to expand...
Click to collapse
Hi,
Your phone is not bricked.
What are you trying to install?
What radio do you have installed?
Flashing an original WM ROM should be done via sd card and it will remove HSPL.
Please give more information.
I installed RUU_Leo_HTC_NLD_1.66.404.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
(that didn't work, if I only install this one I get a black screen after the HTC screen)
The tricolorscreen says:
PB81100 HX-BC
SPL-2.08 HSP: 8G XE
0X05
CotullaHSP 0X50
I will try to flash the original rom via sd card, but that is where it started.. The last time I flashed it (I had WP7 and wanted to try WM6.x) it stopped working. I flashed it via sd card and the second time I tried (when it already had stopped) it was hanging at 'Loading...'.
Any ideas?
bartjakobs said:
I installed RUU_Leo_HTC_NLD_1.66.404.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
(that didn't work, if I only install this one I get a black screen after the HTC screen)
The tricolorscreen says:
PB81100 HX-BC
SPL-2.08 HSP: 8G XE
0X05
CotullaHSP 0X50
I will try to flash the original rom via sd card, but that is where it started.. The last time I flashed it (I had WP7 and wanted to try WM6.x) it stopped working. I flashed it via sd card and the second time I tried (when it already had stopped) it was hanging at 'Loading...'.
Any ideas?
Click to expand...
Click to collapse
Hi,
I take it from the ROM you tried to install that you are in the Netherlands.
Did you get the serial number from your phone and feed it into HTC support site?
Go to HTC site>support>download>ROM upgrade and choose appropriate ROM upgrade for your phone
Change the .exe to .zip and
Extract with winrar or 7z the RUU_Leo_HTC_****************************_Ship.zip
find the larger *.nbh file and rename it to leoimg.nbh and place this file on an sd card that is 4gb or less
and reboot to bootloader (the one with 4 colors,hold volume down button until you see "SEARCHING")
follow the instructions from there.
If you had WM7 on your phone ,you should reformat your sd card to fat 32 before putting on the leoimg.nbh
Backup your data first.
I flashed the original nbh file (from HTC site with my serial number) via sd card. Now it hangs at a black screen after the HTC screen.
On the HTC screen, there now is this:
R 2.15.50.14
G 14.42.50.11U
D 3.14.04666
But after that, the screen goes black (first black lines, than black screen). The backlight stays on.
The colored screen now says this:
Pb81100 HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
What can I do now?
bartjakobs said:
I flashed the original nbh file (from HTC site with my serial number) via sd card. Now it hangs at a black screen after the HTC screen.
On the HTC screen, there now is this:
R 2.15.50.14
G 14.42.50.11U
D 3.14.04666
But after that, the screen goes black (first black lines, than black screen). The backlight stays on.
The colored screen now says this:
Pb81100 HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
What can I do now?
Click to expand...
Click to collapse
Hi,
I think the problem is the SPL-3.03.
Did you get a choice of original ROMS to download?
Try to get 1.43 and 1.48 roms that come with spl 1.42.0000
I tried flashing 1.48 EU English (RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship)
It says
00028002
Not allowed
when starting. After this it goes back to tricolor screen
bartjakobs said:
I tried flashing 1.48 EU English (RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship)
It says
00028002
Not allowed
when starting. After this it goes back to tricolor screen
Click to expand...
Click to collapse
Hi,
ROM code error usually means that official ROM is not for that HD2.
Other than that ,are you using 4GB or less sd card?
Is the phone charged to more than 50%?
I downloaded the original Dutch 1.48 rom
(RUU_Leo_HTC_NLD_1.48.404.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship)
from the HTC website and installed it via SD card.
Now the tricolor screen is:
PB81100 HX-BC
SPL-1.42.0000
etc.
When I start the phone, I see the HTC logo
A few seconds later this appears:
R 2.05.51.05^^^2
G 15.28.50.07U
D 1.48.71294
then, about a minute later, lines and a black screen.
Is there any hope?
bartjakobs said:
I downloaded the original Dutch 1.48 rom
(RUU_Leo_HTC_NLD_1.48.404.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship)
from the HTC website and installed it via SD card.
Now the tricolor screen is:
PB81100 HX-BC
SPL-1.42.0000
etc.
When I start the phone, I see the HTC logo
A few seconds later this appears:
R 2.05.51.05^^^2
G 15.28.50.07U
D 1.48.71294
then, about a minute later, lines and a black screen.
Is there any hope?
Click to expand...
Click to collapse
Try task29- it will erase rom in your hd2 ( it needs hspl )
or
You could try android or wp7 just to see if it works ( other than this i dont know what to say - sorry ).
I tried that (Android & WP7 won't work, because I can't get into MAGLDR. I do get it installed but I can't boot into it).
Tomorrow I'll try task 29.
Run Task 29 after flashing HSPL. This will clean out your system, then flash the 1.48 ROM by SD card method again.
Was there not a 1.66 Netherlands ROM version you could have downloaded?
thanks guys
I flashed HSPL and did task 29. After this, when I flashed the original rom, it stopped with an !.
The second time I tried installing the rom, it just installed but it doesn't start. Only lines and black screen.
during flashing procces does your phone gets hot ?
If yes thats hardware problem ( + software )... in this case to make sure try this:
Take out battery, simcard, sdcard and put it in a fridge for 5-10 min ( put phone in a bag to protect from watter), then take your phone and try to flash rom with sdcard method and post results.
The phone doesn't get hot. An update only fails the first time after a Task 29. The second update succeeds, but then it hangs at HTC or black screen.
I have same problem but not can fix it Many Thanks for all information.
Up new ROM via SD Card.
RUUNBH
PB81100 SS-BC
SPL-3.03.0000 XE
MicroP(LED) 0X05
MicroP(TOUCH) 0X50
UPGRADE ROM CODE ERROR PLEASE TRY AGAIN
help me in this case
trying from last 3 hours but cannot find useful information on this error
I used to have android on my htc hd2 before I wanted to roll back to windows so I tried to follow the steps
downloaded the rom from htc site and I found it is wrong
my hd2 is not t mobile
its model number is T8585
made in taiwan
hspl4 does not recognise the phone
gives out connectivity error
but my phone shows usb in white boot loader
when i tried with other rom it gives out 00028002 dont allow message
so if any one can help me please.......
You need to download the correct RUU or LEOIMG.nbh for your HD2.HSPL on your HD2, this means your HD2 will only flash the correct stock ROM for your HD2. I am not really sure why HSPL 4 is giving you trouble. I would find the correct ROM for the device and flash it first, then try to run HSPL 4 again. I will be monitoring this thread today so post back if you need further help.
Also please refrain from double posting threads on the same question as it is against the rules to do so.
thank you for the reply
I don't know how to find the correct stock rom for my phone
its model number is T8585
windows mobile 6.5 professional patform
512mb rom
can you help me where to download the stock rom for this one...
when i try to do hspl it says waiting for usb connection and after sometime it gives out critical error
usb connect failed
my pc recognises my phone as qualcom technologies cdma msm
serial number of my phone is
HT097NW00014
I dont know where to enter serial number to download stock rom from htc website
You need a RUU that was for the carrier the de ice wad originally with and the area that the device came from. The name of the RUU file will have the information on what carrier it is for and what region it is for. Start looking through the HD2 Windows Mobile 6.5 ROM development forum to find kinks to stock ROMs as I can not find any of the stick ROMs on HTC.com. If you have s T-Moile HD2 look for the stock ROM in the T-Mobile Windows Mobile 6.5 ROM development.
Same problem
I've crying for three days, last night didnt sleep... Ive flashed few roms im my HD2, my problems started when I flashed Windows Phone7, first it locked my SD card but I solved it... After that I decided roll back to Ice Cream Sandwich... Did a task 29 sucessfully and put back the ICS, and my fall down started, my micro USB port stopped working in bootloader and the phone dont charge anymore, strangelly it works through magldr as usb mass storage. That means I cant flash HSPL, Ive been trying official stock roms vis SD, 6 by now and all of them failed saying "00028002 Not allow" I dont know wich one is the correct rom... In the HTC web site cant find any option to insert the serial number in order to get the stock rom.
In advance... Thanks
My Serial number: HT039NW01068
Please help us, Ive been solving my problem through xda since my HTC gene