Database Users

Error (262) for diamond2 wm 6.5

Hi,
Help me please just me and that happens to me the mistakes my God.... I had the original ROM version coming with my diamond2, put the upgrading and went well until the moment he arrived at 9% and restart the pda, re-install I think is normal, however the installation continued until k stopped in 18% and after a long time gave a notice of error (262) made the recovery as recommended and continues to give error ....
I do help me please

This just happened to me too
My phone was hardspl´d
It stuck at 18%, but no error message so far. Did you unplug your phone?

Read this:
http://forum.xda-developers.com/showthread.php?t=425913

I'm not sure. Have you flashed other roms before? Perhaps you have a bad download. I know the servers are overloaded from all of us geeks sucking down the WM6.5 rom... perhaps its bad.
What I normally do is put the phone in bootloader mode first by holding VolDown, while resetting the phone. This will give windows time to install the proper drivers and get situated. Once done, try flashing again.
I think 262 is a connection error. Probably driver related since you said you ran your stock rom. But check your cable. Make sure its secure and reliable. Next try another USB slot. If nothing else try a different computer... sometimes PCs just will not cooperate.

Thank you very much fighter, will try that.

I had Official 6.1 Asia WWE installed, HARDSPLed. Tried to upgrade to 6.5 on my computer and my laptop, nothing worked. Both stops at 9%, disconnects, comes back and stucks at 18% again. Had to go back to 6.1, this time it worked to bring phone to life.
My phone was bought in Taiwan.
Guess I am out of luck

I think the best way to upgrade is as follows:
1. Run the RUU_Topaz_S_HTC_WWE_2.16.405.4_Radio_Sign_Topaz_61.44tc.25.32_4.49.25.17_Ship.exe on your PC/laptop to extract and get the RUU-signed.nbh.
2. Copy the RUU-signed.nbh to topaz SD card and rename to topaimg.nbh
3. Upgrade new ROM from SD card.

I had the same 262 error as well, screen went blank for a second at 9% and finally freezez at 18% with the error message. Heres what you need to do:
Update your HardSPL to 1.83
Flash 6.5 again
????
Profit!

Hello,
already did everything you say and nothing. I liked to tell me where I can get the former Rom wm6.1 because meeting.
help me please

duongla said:
I think the best way to upgrade is as follows:
1. Run the RUU_Topaz_S_HTC_WWE_2.16.405.4_Radio_Sign_Topaz_61.44tc.25.32_4.49.25.17_Ship.exe on your PC/laptop to extract and get the RUU-signed.nbh.
2. Copy the RUU-signed.nbh to topaz SD card and rename to topaimg.nbh
3. Upgrade new ROM from SD card.
Click to expand...
Click to collapse
Would you be so kind as to enlighten me/us on how to extract the nbh file from the executable file.
Thanks

player911 said:
I'm not sure. Have you flashed other roms before? Perhaps you have a bad download. I know the servers are overloaded from all of us geeks sucking down the WM6.5 rom... perhaps its bad.
What I normally do is put the phone in bootloader mode first by holding VolDown, while resetting the phone. This will give windows time to install the proper drivers and get situated. Once done, try flashing again.
I think 262 is a connection error. Probably driver related since you said you ran your stock rom. But check your cable. Make sure its secure and reliable. Next try another USB slot. If nothing else try a different computer... sometimes PCs just will not cooperate.
Click to expand...
Click to collapse
How can u exit bootloader screen? Only by removing the battery or...?
Thanks!

I do not have with me the adapter card to do this
There is also a problem is that the pda now I do not go the menu with the three colors blue, green and red, until I have done a hardreset and nothing ....
at least I no longer ask the solution with the ROM 6.5 we only have as I had before ... and wanted my pda to work help me please

Little history for my friends with same problem here:
1. Bought Diamond in Taiwan with Chinese;
2. HARDSPL 1.33;
3. Install Asia WWE 6.1 ROM;
4. Try update Official WWE 6.5 ROM, no luck, remove battery and put back;
5. Reinstall Asia WWE 6.1 ROM, everything back to normal;
6. Update HARDSPL 1.83; Ask brother to donate
7. Install Duttys ROM or Official ROM works too

Hello,
I already installed the previous ROM with the 6.1 and everything was normal.
I tried to install again the OFFICIAL ROM 6.5 and the problem remains back to the error at 9% and 18% for the progress bar giving an error (262).
not understand some things as:
6. Update HARDSPL 1.83; Ask brother to donate
7. Install Duttys ROM or Official ROM works too
is there any solution?
can help me

Sorry:
1. install Hard-SPL 1.83.OliNex (http://forum.xda-developers.com/showthread.php?t=520312)
2. install 6.5 ROM or Cooked Rom.
It resets 9% again in Official ROM, but reconnects and go to 100% (no stop 18% again).
Dutty ROM no stop at 9% or 18%.

problem solved
thanks for the great help amazing
thank you very much

hello
the memory card is not me out with the official wm 6.5 ROM
what can I do to boot the card?? I have a diamond2
ah no problem of card pk started the card with the adapter to the PC and read it perfectly.
pesquisar

AntonyWatson said:
Would you be so kind as to enlighten me/us on how to extract the nbh file from the executable file.
Thanks
Click to expand...
Click to collapse
When you run the RUU, the RUU-signed.nbh will be extract temporarily to a folder in driver C:
(For me: C:\Users\Duongla\AppData\Local\Temp\pft51D9.tmp)
Just do a search and you'll find it.
And remember to HSPL to 1.83.

i have the same problem too
hello
i have a diamond 2
ihave olinex 1.83 from here http://forum.xda-developers.com/showthread.php?t=520312 and i can not install ANY wm6.5 rom!!! on the other hand EVERY 6.1 rom i have trie (5 different greek and english) work perfect?!?!??
any suggestions?
thanks

i had the same issue
i was running 6.1 (stock rom) which was hard spl'd
i had the same error kept going to 262 and haviong to be recovered
so i re hard spl'd with the latest one, and it worked fine after that,

rom re boot steps

Hi XDA developer
I need help as my HTC HD2 MOBILE is not reboot I have tried the hard reboot and nothing happens.
two questions;
1. if i was to install a new verison of the rom Altermis v 26. which i have downloaded there is a another software called SSLD that I also need to download where is this. And how do i do this.
2. what happens if i cannot reboot the phone TOTALLY - in order to get to the operating screen where i can restore factory settings. I have also done a soft reset and still cannot getting into the phone.
THE MOBILE IS STUCK ON THE "HTC" PRE BOOT UP SCREEN AND NOT PROGRESSING FORWARD FROM THIS POINT.
HELP!!!!!!!!!!!!!!!!! PLEASE

keilah said:
THE MOBILE IS STUCK ON THE "HTC" PRE BOOT UP SCREEN AND NOT PROGRESSING FORWARD FROM THIS POINT.
Click to expand...
Click to collapse
did you flash a custom rom before this happened? If so, it is likely that you forgot to update to a compatible radi. Look through the thread for the rom you downloaded for details.

Hi
oK I under stand but if you was intsalling Altermis v26 on your phone.....there is a additional file where youy down load the software before transferring to your phone what is that software??????
please callled and where can i downlaod this

do you mean hspl? see my sig

yes
if that allows you to download "software" to the HTC HD2 device....and can you kindly please post the link here. and any steps i need to be aware off as i am new to this site.
Once again may thanks for all your feedback and assistance.....

the link is in my signature
"One HSPL3 to rule them all - all leo's supported, all spl inc tmous 2.10.0000"

[Q] having some issues

im currently new to XDA and HD2.
im having problems downloading the android 2.2 nand, i have the magldr 1.11 downloaded but the android nand download like is to rapidshare.
when i go to download the file it gives me a error message.
i got the link from techburrows video tutorial..
any help would be appreciated.
sorry if i posted this in the wrong place.

i think i found the download somewhere else.
i have a t-mobile usa hd2 with a 3.14 rom.
i know i have to install hardspl to flash the android rom.
im just not sure what i have to do to get hardspl on to my device.

In order to flash HSPL you need to downgrade to 2.08 spl first then you can flash the Rom of your choice. Here's a link as to how to do it for W.M. the steps are the same except that you'd use the android rom of your choice and it's loading instructions
http://forum.xda-developers.com/showthread.php?t=653614

i downloaded hspl but when i connect my phone and hit install it says...
RAPI.dll isnt installed, reinstalling might fix this problem. idk what that means.

is that activesync?

so i got everything to work.
downloaded hspl.
downloaded magldr.
downloaded android nand.
booted up magldr, put it in usb flasher mode, ran the dft android application but got this error.
Error happen
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (723)
even tho my phone was connected. any help?

now magldr isnt working, at first the wait usb...usb showed up when i connected it.
but now its not doing it.
so now what?

I have been trying to load NAND on my tester HD2 since it was posted and never have gotten it to load once I'm running the DFT program. Doesn't matter which MAGDLR version I have used it never connects but in bootloader mode it shows im connected. It's crazy because the DFT WP7 loaded perfectly. I've about given up because Android works perfect from the SD for me so I'm just working on keeping the dual boot but am gonna use WP7 and run Android from the SD so I get the best of both worlds.
Sent from my HTC Desire using XDA App

So I was able to get everything loaded up properly. Im just having problems with my internet connection.
Any help?

So I got everything working. I'm loving it. Thanks for the help.
Sent from my HTC HD2 using XDA App

Cannot get my hd2 to run android

Guys, am trying to downgrade my SPL from 3.03.0000 but I cannot manage. Am running a vodafone locked hd2 on windows, but cannot find anything for this... help am kind of new to this...

Thread moved to Q&A in Android HD2.

Hi This is what i did
Flash a Stock HTC ROM 1.66 (Since its HTC ROM it installs when u run CustomRUU
SPL will get downgraded automatically
Now Install HSPL3 (option to choose - HSPL 2.08)
Now u can get Magldr, NAND Android flashed
Please look at my signature link if you are looking to get a SD build for instructions.
Good luck

question, where do i get Stock HTC ROM 1.66 from? Ive been downloading roms but none seem to work. My phone gets stuck after the rainbow screen. i get the loading screen which says that might take ten minutes but nothing happens...

xlinu said:
question, where do i get Stock HTC ROM 1.66 from? Ive been downloading roms but none seem to work. My phone gets stuck after the rainbow screen. i get the loading screen which says that might take ten minutes but nothing happens...
Click to expand...
Click to collapse
Maybe your radio needs updating? That was my problem when I first starting flashing roms around. Do you have the most recent?

DOWNLOAD:
Task 29
radio: Leo_RADIO_2.15.50.14 (http://forum.xda-developers.com/showthread.php?t=611787)
HSPL3
MAGLARD 1.13
ANDROID NAND ROM
enter bootloader mode.. flash task 29.
enter bootloader mode.. flash hspl (2.08
enter bootloader mode. flash radio
enter bootload mode.. flash maglard.
wait for maglard to open. Click on usb flasher. Flash your rom. I hope this works

xlinu said:
question, where do i get Stock HTC ROM 1.66 from? Ive been downloading roms but none seem to work. My phone gets stuck after the rainbow screen. i get the loading screen which says that might take ten minutes but nothing happens...
Click to expand...
Click to collapse
You can't just download any 1.66 rom and hope it works. The roms are split according to regions and you need to find the correct one for your device. Go to HTC for your area and enter your s/n and you should then be able to download the correct rom for your phone.

I got this message when trying to download the software:
Sorry, this software download is not suitable for your device.

xlinu said:
I got this message when trying to download the software:
Sorry, this software download is not suitable for your device.
Click to expand...
Click to collapse
HardSPL your phone, this will allow you to put any ROM on your phone.
Go to the windows 6.5 developement section of XDA, there you will find S/Numbers that you can enter in the HTC web site that will allow you to dowload a stock ROM for your part of the world.
Energy ROMs are fast and stable.
Read the NOOB threds at the start of all sections they are full of help, links and walkthroughs

is it too much to ask for a direct link for the thread to hardspl the hd2? mine is not tmobile, but a vodafone malta locked leo... am kinda stuck...

xlinu said:
is it too much to ask for a direct link for the thread to hardspl the hd2? mine is not tmobile, but a vodafone malta locked leo... am kinda stuck...
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=611433

thanks a lot!!

new update 7.10.8862.144

yesterday released new update 7.10.8862.144
just information for all :good:
I have custom ROM and update run OK by ZUNE without any change or lock back.

i'm trying to update but i GOT 80180042 error

Currently I am using a rooted custom ROM - will I loose my root when updating via Zune? Or will my phone still be rooted after the regular update via Zune?

jupp99 said:
Currently I am using a rooted custom ROM - will I loose my root when updating via Zune? Or will my phone still be rooted after the regular update via Zune?
Click to expand...
Click to collapse
mine stayed rooted

and new think discovered
B/T start working ( is visible for laptop and can add device to laptop but no another services as push or serial port)
HEUREKA MICROSOFT

Error with updating: 80180048
I got error 80180048 when I try to update. Does anyone know how I can fix this problem. Ican't rollback with Zune . I have Win 8 installed on my computer lately. A hard reset does'nt work neighter.
I have solved the problem by installing another rom : Dynamics. After that there were 2 updates to 8862.142 and than to 8862.144.
Everything oke now!

flippolino said:
I got error 80180048 when I try to update. Does anyone know how I can fix this problem. Ican't rollback with Zune . I have Win 8 installed on my computer lately. A hard reset does'nt work neighter.
I have solved the problem by installing another rom : Dynamics. After that there were 2 updates to 8862.142 and than to 8862.144.
Everything oke now!
Click to expand...
Click to collapse
Interesting, I'm looking for custom ROM 8862.144 for my Omnia7 but I don't understand/find how to get this build.
Do I have to install Dynamics Rom (build number??) and then?
What is the procedure to get 2 updates 862.142 and 8862.144?
I have Win8 x64 on my PC and Zune latest version, but when I installed my old custom ROM Mi7Rom Nokia Ed WP 7.5 I had Windows 7 on my PC.
Thank you very much

Mousexx74 said:
Interesting, I'm looking for custom ROM 8862.144 for my Omnia7 but I don't understand/find how to get this build.
Do I have to install Dynamics Rom (build number??) and then?
What is the procedure to get 2 updates 862.142 and 8862.144?
I have Win8 x64 on my PC and Zune latest version, but when I installed my old custom ROM Mi7Rom Nokia Ed WP 7.5 I had Windows 7 on my PC.
Thank you very much
Click to expand...
Click to collapse
With my Phone :Samsung Omnia 7,I worked this way out : With the rom from Ansar installed on it no way! installation failed. After a hint I found, I installed the Dynamics rom (see elswhere here on the site and how to do) and after that with the latest Zune I could install the 2 updates from Microsoft and the Phone is now really oke with the new Microsoft build.
My Phone was English With the dynamic rom I could choose Dutch and quess, with the update from Microsoft the possibility for Dutch is there now officially. With the dynamic rom on it : open Zune ,look for updates and wait.... and then the first 142 update comes.

I've done the same. I installed the rom Dynamics and Iwas connect the mobile to PC. When starting Zune, found an update, the 8860 and then another: the 8862. Now, I have the latest fw. Good rom, the rom Dynamics!

lomax50 said:
I've done the same. I installed the rom Dynamics and Iwas connect the mobile to PC. When starting Zune, found an update, the 8860 and then another: the 8862. Now, I have the latest fw. Good rom, the rom Dynamics!
Click to expand...
Click to collapse
Wow great news.
I find post about "Dynamics v2.0 - WP7.8 RTM and much more"
I've downloaded txt files under links section where I find ROM download URL.
But I cannot find anything about installation instruction.
On my Omnia 7 I've already installaed Mi7Rom Nokia Ed (WP 7.5)...
Can I use same instructions for Dynamics v2.0?
Thank you

Okay.
Short instr.
1.You have to install the Samsung usbdriver 5.2
2.Set your Omnia Phone in downloadmode : press and hold Camera button, volume + and the power button. ( on your screen you see a yellow triangle)
3. Magdldr_2.00 .Open DFT_MLI_SAM1, select Omnia 7 and Magdldr V200 will be installed.After that put Phone off.
4.Extract the Dynamic rom . You find in the directory DFT_WPI_SAM1.exe.
5Put the Phone in MAGDLDR mode by pressing and hold the camera button, volume - and the power button. You see a little yellow triangle.
6.Push the back button on your Phone connect to the pce and start DFT_WPI_SAM1. exe. The download start.
7. After installing and setting your Phone, connect to your pc, start Zune and look for updates. I found the first directly and the second cam afther that right away!
Succes!

Great... Everything goes right.
Now I have latest version.
But I have another quesion. How can I clear storage afetr flashing Rom?
I remember that I made something after my first 'rom flash' but I don't remember what I made :-S
Is it an important or optional step?
Thank you
Sent from my SAMSUNG using Board Express

Mousexx74 said:
Great... Everything goes right.
Now I have latest version.
But I have another quesion. How can I clear storage afetr flashing Rom?
I remember that I made something after my first 'rom flash' but I don't remember what I made :-S
Is it an important or optional step?
Thank you
Sent from my SAMSUNG using Board Express
Click to expand...
Click to collapse
Boot into format mode (Volume down + camera + power), and press home twice (format)

The best ROM available
flippolino said:
I got error 80180048 when I try to update. Does anyone know how I can fix this problem. Ican't rollback with Zune . I have Win 8 installed on my computer lately. A hard reset does'nt work neighter.
I have solved the problem by installing another rom : Dynamics. After that there were 2 updates to 8862.142 and than to 8862.144.
Everything oke now!
Click to expand...
Click to collapse
Dynamics v2 is the best ROM around for Omnia 7. Simple installation, powerful Apps. The only tip for those how want a smooth flashing, use a Windows 7 x86 machine. I had troubles using Windows 8 x64.
Download MAGLDR: HERE
Download OMNIA 7 ROM: HERE (Download Omnia__8858_Release.rar file)
Regards!