Database Users

Error (262) for diamond2 wm 6.5

Hi,
Help me please just me and that happens to me the mistakes my God.... I had the original ROM version coming with my diamond2, put the upgrading and went well until the moment he arrived at 9% and restart the pda, re-install I think is normal, however the installation continued until k stopped in 18% and after a long time gave a notice of error (262) made the recovery as recommended and continues to give error ....
I do help me please

This just happened to me too
My phone was hardspl´d
It stuck at 18%, but no error message so far. Did you unplug your phone?

Read this:
http://forum.xda-developers.com/showthread.php?t=425913

I'm not sure. Have you flashed other roms before? Perhaps you have a bad download. I know the servers are overloaded from all of us geeks sucking down the WM6.5 rom... perhaps its bad.
What I normally do is put the phone in bootloader mode first by holding VolDown, while resetting the phone. This will give windows time to install the proper drivers and get situated. Once done, try flashing again.
I think 262 is a connection error. Probably driver related since you said you ran your stock rom. But check your cable. Make sure its secure and reliable. Next try another USB slot. If nothing else try a different computer... sometimes PCs just will not cooperate.

Thank you very much fighter, will try that.

I had Official 6.1 Asia WWE installed, HARDSPLed. Tried to upgrade to 6.5 on my computer and my laptop, nothing worked. Both stops at 9%, disconnects, comes back and stucks at 18% again. Had to go back to 6.1, this time it worked to bring phone to life.
My phone was bought in Taiwan.
Guess I am out of luck

I think the best way to upgrade is as follows:
1. Run the RUU_Topaz_S_HTC_WWE_2.16.405.4_Radio_Sign_Topaz_61.44tc.25.32_4.49.25.17_Ship.exe on your PC/laptop to extract and get the RUU-signed.nbh.
2. Copy the RUU-signed.nbh to topaz SD card and rename to topaimg.nbh
3. Upgrade new ROM from SD card.

I had the same 262 error as well, screen went blank for a second at 9% and finally freezez at 18% with the error message. Heres what you need to do:
Update your HardSPL to 1.83
Flash 6.5 again
????
Profit!

Hello,
already did everything you say and nothing. I liked to tell me where I can get the former Rom wm6.1 because meeting.
help me please

duongla said:
I think the best way to upgrade is as follows:
1. Run the RUU_Topaz_S_HTC_WWE_2.16.405.4_Radio_Sign_Topaz_61.44tc.25.32_4.49.25.17_Ship.exe on your PC/laptop to extract and get the RUU-signed.nbh.
2. Copy the RUU-signed.nbh to topaz SD card and rename to topaimg.nbh
3. Upgrade new ROM from SD card.
Click to expand...
Click to collapse
Would you be so kind as to enlighten me/us on how to extract the nbh file from the executable file.
Thanks

player911 said:
I'm not sure. Have you flashed other roms before? Perhaps you have a bad download. I know the servers are overloaded from all of us geeks sucking down the WM6.5 rom... perhaps its bad.
What I normally do is put the phone in bootloader mode first by holding VolDown, while resetting the phone. This will give windows time to install the proper drivers and get situated. Once done, try flashing again.
I think 262 is a connection error. Probably driver related since you said you ran your stock rom. But check your cable. Make sure its secure and reliable. Next try another USB slot. If nothing else try a different computer... sometimes PCs just will not cooperate.
Click to expand...
Click to collapse
How can u exit bootloader screen? Only by removing the battery or...?
Thanks!

I do not have with me the adapter card to do this
There is also a problem is that the pda now I do not go the menu with the three colors blue, green and red, until I have done a hardreset and nothing ....
at least I no longer ask the solution with the ROM 6.5 we only have as I had before ... and wanted my pda to work help me please

Little history for my friends with same problem here:
1. Bought Diamond in Taiwan with Chinese;
2. HARDSPL 1.33;
3. Install Asia WWE 6.1 ROM;
4. Try update Official WWE 6.5 ROM, no luck, remove battery and put back;
5. Reinstall Asia WWE 6.1 ROM, everything back to normal;
6. Update HARDSPL 1.83; Ask brother to donate
7. Install Duttys ROM or Official ROM works too

Hello,
I already installed the previous ROM with the 6.1 and everything was normal.
I tried to install again the OFFICIAL ROM 6.5 and the problem remains back to the error at 9% and 18% for the progress bar giving an error (262).
not understand some things as:
6. Update HARDSPL 1.83; Ask brother to donate
7. Install Duttys ROM or Official ROM works too
is there any solution?
can help me

Sorry:
1. install Hard-SPL 1.83.OliNex (http://forum.xda-developers.com/showthread.php?t=520312)
2. install 6.5 ROM or Cooked Rom.
It resets 9% again in Official ROM, but reconnects and go to 100% (no stop 18% again).
Dutty ROM no stop at 9% or 18%.

problem solved
thanks for the great help amazing
thank you very much

hello
the memory card is not me out with the official wm 6.5 ROM
what can I do to boot the card?? I have a diamond2
ah no problem of card pk started the card with the adapter to the PC and read it perfectly.
pesquisar

AntonyWatson said:
Would you be so kind as to enlighten me/us on how to extract the nbh file from the executable file.
Thanks
Click to expand...
Click to collapse
When you run the RUU, the RUU-signed.nbh will be extract temporarily to a folder in driver C:
(For me: C:\Users\Duongla\AppData\Local\Temp\pft51D9.tmp)
Just do a search and you'll find it.
And remember to HSPL to 1.83.

i have the same problem too
hello
i have a diamond 2
ihave olinex 1.83 from here http://forum.xda-developers.com/showthread.php?t=520312 and i can not install ANY wm6.5 rom!!! on the other hand EVERY 6.1 rom i have trie (5 different greek and english) work perfect?!?!??
any suggestions?
thanks

i had the same issue
i was running 6.1 (stock rom) which was hard spl'd
i had the same error kept going to 262 and haviong to be recovered
so i re hard spl'd with the latest one, and it worked fine after that,

HTC Surround OEM cabs

Hey I just wanted to share the (2) OEM updates for the Surround.
1st was included with the 7392 update:
http://download.windowsupdate.com/m..._e9a01966f3fe897b61f9f0712b2746adb067bfd1.cab
Brings the following up to:
Firmware revision # 2250.21.15204.502
Radio software version 5.66.09.09_22.46.50.21H
Bootloader version 1.5.2.2250.4
2nd was included with the 7720 update:
http://download.windowsupdate.com/m..._9dc85b25de5f2e11d7649ce4fbc0a30a6918fab9.cab
Brings the following up to:
Firmware revision # 2250.21.40300.502
Radio software version 5.69.09.05a_22.50.50.21H
Bootloader version 4.3.2.2250.0
I traced these earlier using wireshark, enjoy!

donjulio0088 said:
Hey I just wanted to share the (2) OEM updates for the Surround.
1st was included with the 7392 update:
http://download.windowsupdate.com/m..._e9a01966f3fe897b61f9f0712b2746adb067bfd1.cab
Brings the following up to:
Firmware revision # 2250.21.15204.502
Radio software version 5.66.09.09_22.46.50.21H
Bootloader version 1.5.2.2250.4
2nd was included with the 7720 update:
http://download.windowsupdate.com/m..._9dc85b25de5f2e11d7649ce4fbc0a30a6918fab9.cab
Brings the following up to:
Firmware revision # 2250.21.40300.502
Radio software version 5.69.09.05a_22.50.50.21H
Bootloader version 4.3.2.2250.0
I traced these earlier using wireshark, enjoy!
Click to expand...
Click to collapse
Hmm, my Surround is running different Firmware and Bootloader versions:
Firmware: 2250.21.40500.502
Bootloader: 4.5.2250.0(129685)
Running Mango OS: 7.10.7720.68 - No forced updates.

I am not sure why yours are different, I flashed a pre-NODO AT&T ROM to the device and I let Zune take it from there all the way to 7720. This is what was downloaded and installed to my Surround. I already downloaded those cabs manually and applied them to my wife's phone with no issues via cab sender. She missed the OEM updates alnog the way somehow.

Dunno. Purchased on launch day, and stock all the way. I did have the Beta 1&2 versions of Mango on my device (Developer Unlocked), but did a hard reset just before updating to the official Mango. No updates since then, although I did get three updates that day; pre-Mango cleanup, Mango and HTC firmware.

jimski said:
Dunno. Purchased on launch day, and stock all the way. I did have the Beta 1&2 versions of Mango on my device (Developer Unlocked), but did a hard reset just before updating to the official Mango. No updates since then, although I did get three updates that day; pre-Mango cleanup, Mango and HTC firmware.
Click to expand...
Click to collapse
jimski, I think you just explained why yours are different. You applied the beta versions of Mango to your phone which altered the "stock" ROM you had on your device. I had the same versions as your phone before I reflashed to stock and allowed Zune to do all the work this time. Even though you had a pre mango cleanup your ROM wasn't noticed as stock anymore. Anyone that has never applied the beta mango on their AT&T device and is up to todays specs please post what versions you have compared to those listed above. Thanks!

donjulio0088 said:
jimski, I think you just explained why yours are different. You applied the beta versions of Mango to your phone which altered the "stock" ROM you had on your device. I had the same versions as your phone before I reflashed to stock and allowed Zune to do all the work this time. Even though you had a pre mango cleanup your ROM wasn't noticed as stock anymore. Anyone that has never applied the beta mango on their AT&T device and is up to todays specs please post what versions you have compared to those listed above. Thanks!
Click to expand...
Click to collapse
Actually, his firmware and bootloader version are the same as mine, and I haven't tampered with my phone at all. Our firmware and bootloader versions are newer than yours. There's something wrong. By the way, do you by any chance use a Zune subscription?? The HTC Surround has been locking up while playing songs on battery power ever since the Mango Update.

israel.lopez217 said:
Actually, his firmware and bootloader version are the same as mine, and I haven't tampered with my phone at all. Our firmware and bootloader versions are newer than yours. There's something wrong. By the way, do you by any chance use a Zune subscription?? The HTC Surround has been locking up while playing songs on battery power ever since the Mango Update.
Click to expand...
Click to collapse
I dont subscribe to the Zune service. However I did state that I had the same versions as you before I recently reflashed the stock AT&T ROM and let Zune do all the updating. Now I wonder why the current updates dont match the older updates. P.S. My phone performs much better with these lower versions that I now have compared to the versions that I had before(which you currently have). No lockups, no hesitations, no restarts. Everything has been flawless since reflashing and reupdating.

I did experience lockups (alarm bug), restarts, and quirky volume changes when plugging anything into the 3.5m jack literally from the day I got my Surround (on launch day), and through the NoDo update. After NoDo, without any noticable bug improvements, I did my first hard reset (last March) and all the issues dissapeared. I wrote it off as something getting screwed up during manufacture, although the underlying ROM seemed to be fine. You might be experiencing the same thing with your recent stock ATT ROM flash. Did you try a hard reset prior to flashing?
BTW, for israel.lopez217, I do have Zune Pass, but don't stream music very often. Been playing streamed tracks for the past 20 minutes though (5 or 6 so far) and no lockups. On battery, and the screen is sleeping.

How to install the CABs
Please, can you tell me how to install the CABs, I tried copying the cabs on the "WP7 Update Cab Sender" folder and then launch the bat file, but the tools states: Error: No update files.
Thanks.

dach said:
Please, can you tell me how to install the CABs, I tried copying the cabs on the "WP7 Update Cab Sender" folder and then launch the bat file, but the tools states: Error: No update files.
Thanks.
Click to expand...
Click to collapse
Please read this thread, it explains everything.
http://forum.xda-developers.com/showthread.php?t=1306415

SOLVED Error: No updates files
dach said:
Please, can you tell me how to install the CABs, I tried copying the cabs on the "WP7 Update Cab Sender" folder and then launch the bat file, but the tools states: Error: No update files.
Thanks.
Click to expand...
Click to collapse
The problem was that I was right clicking the BAT file then Run as Admin, for it to work I had to open an elevated command prompt (run as admin) and then launch the BAT file from the cmd.
Hope this helps someone.

I'm not able to use the second cab to update the bootloader to version 4.3.2.2250.0 with the NT cab provided by Ansar for HTC Surround. It goes through the entire procedure and then gives an error msg at the end, saying that the update was unsuccessful.

mangojain said:
I'm not able to use the second cab to update the bootloader to version 4.3.2.2250.0 with the NT cab provided by Ansar for HTC Surround. It goes through the entire procedure and then gives an error msg at the end, saying that the update was unsuccessful.
Click to expand...
Click to collapse
I think you misunderstood what OEM meant. You need to check with Ansar about updating his ROM.

I am not allowed to post on the development forum yet, else i would ask Ansar there. Hope he reads these posts too. Updating the bootloader is hardly important, but i wish he would provide a solution for Internet Sharing not working on his NT rom.

donjulio0088 - the 2nd cab updated my stock rom yesterday. any idea where i can lay my hands on a cab for the latest firmware (2250.21.40500.502 at least) . . . Zune is not showing any updates available . . . am really desperate for ICS, my broadband connection often goes down and with my Windows 6.5 device i used to have a fallback option.

mangojain said:
donjulio0088 - the 2nd cab updated my stock rom yesterday. any idea where i can lay my hands on a cab for the latest firmware (2250.21.40500.502 at least) . . . Zune is not showing any updates available . . . am really desperate for ICS, my broadband connection often goes down and with my Windows 6.5 device i used to have a fallback option.
Click to expand...
Click to collapse
Unfortunately I didn't get that one to my phone. I haven't seen anyone else post any other cabs for the Surround either. If you manage to locate please post your findings.

It is here somewhere in the forum, as I downloaded it. I will try to find it and post it.

donjulio0088 said:
Unfortunately I didn't get that one to my phone. I haven't seen anyone else post any other cabs for the Surround either. If you manage to locate please post your findings.
Click to expand...
Click to collapse
Yeah, I'm on 2250.21.40200.661 and would like to update it, too.
Sent from my A100 using Tapatalk

i m on 7713.wm7_main(DFT) rom when i connect to zune it says update is available from htc but m not able to update since in DFT zune update doesnt work....so can someone plz help how to update my phone via zune? or else how do i revert to stock rom so tht i can update my phone via zune.... plz helpme.

HTC HD2 Update to Windows 7 Phone Mango

HI,
I have been attempting to update my HTC HD2 Phone from Windows 6.5 to Windows Phone 7 Mango. I have got as far as flasing the Mango Rom but cannot download it via the multiupload link which has been put down. Can anyone advise where I can download this WINDOWS PHONE 7 MANGO from now as I cannot now use my phone.
Any help would be much appreciated.
Thanks

Sorry I'm confused, you say you've flashed it already but can't download it, how did you flash it then, are you saying you need to download it again?

Sorry No haven't flashed that part yet.
Have completed:
1. Hard SPL
2. Radio which supports 576 MB RAM
3. MAGLDR 1.3
But unable to download Windows Phone 7 Mango ROM so I can flash it? So this is why I am looking a link to this so I can download and get my phone up and running again.

Have you tried all these:
http://forum.xda-developers.com/forumdisplay.php?f=977

Yes tried those. All the links to multiupload are dead. This is why I require someone to point me in direction of where I can get this downloaded from besides Multiupload.

Try here m8: http://www.rhiffsta.ch/HD2O_Roms/listwp7.html

[Q] HD2 resetting after WP7 7004

Hi,
I just installed WP 7 7004 on my way to Mango installation.
However, the phone is constantly resetting.
What could be the problem?

It could be caused by the SD card. Last time I went this route to load Mango, I left the SD card until I got the first two updates installed. There is some info on this in other posts.

appa73 said:
Hi,
I just installed WP 7 7004 on my way to Mango installation.
However, the phone is constantly resetting.
What could be the problem?
Click to expand...
Click to collapse
If you are starting out from 7004, do not reboot after the initial flash. Go straight into flashing the next set of cabs. Sounds like you're flashing Yuki/XBmod'a ROM.

hjhjhj said:
If you are starting out from 7004, do not reboot after the initial flash. Go straight into flashing the next set of cabs. Sounds like you're flashing Yuki/XBmod'a ROM.
Click to expand...
Click to collapse
yes, i am. thank you. i removed the SD card and re-flashed the ROM. Its working. However, I am trying to upgrade from 7004 to 7720 directly but unable to find
WP7-7004-7720-Patch.zip anywhere. The old multiupload locations are not working.
Do you know anywhere else i can find it?

appa73 said:
yes, i am. thank you. i removed the SD card and re-flashed the ROM. Its working. However, I am trying to upgrade from 7004 to 7720 directly but unable to find
WP7-7004-7720-Patch.zip anywhere. The old multiupload locations are not working.
Do you know anywhere else i can find it?
Click to expand...
Click to collapse
You can find all of Yuki/XBmod's cabs and xaps here.
http://xboxmod.sylvester20007.com
Go to http://xboxmod.sylvester20007.com/CABS/OSBUILD.CAB/ and use the 7004 to 8107 autoinstaller. This is a nonstop update installer except for a pause after the first set of installs...follow screen instructions once the installation starts.
Don't forget to flash SP1 cab once the above is completed.

hjhjhj said:
You can find all of Yuki/XBmod's cabs and xaps here.
Go to and use the 7004 to 8107 autoinstaller. This is a nonstop update installer except for a pause after the first set of installs...follow screen instructions once the installation starts.
Don't forget to flash SP1 cab once the above is completed.
Click to expand...
Click to collapse
Thanks once again, i did that and it worked fine till i flashed SP1 after 7720. I should have first got to 7740, but i flashed SP1 a step earlier.
Can I now go to 7740 and again flash SP1? Else how to undo SP1?

appa73 said:
Thanks once again, i did that and it worked fine till i flashed SP1 after 7720. I should have first got to 7740, but i flashed SP1 a step earlier.
Can I now go to 7740 and again flash SP1? Else how to undo SP1?
Click to expand...
Click to collapse
nope...have to start over again and flash from scratch...just flash sp1 last after 8107 mango finishes. you should not stop the flash going from 7004 to 8107...DO NOT INTERRUPT THE AUTOINSTALLER...JUST PRESS ANY KEY WHEN IT SAYS 'PRESS ANY KEY TO CONTINUE' TO FINISH THE INSTALL TO 8107.
THE TOTAL TIME TAKES ABOUT 1.5 HRS.
READ THE SUGGESTED FLASH ON THE 1ST POST ON YUKI'S FORUM.

[Q] Win 6.5 rom helppppp

hello
I need a rom of windows mobile 6.5 it was in english and it seemed like one of these
http://forum.xda-developers.com/showthread.php?t=801481 here but at the button of home had one andorid logo not home it had 9slides like andorid do but i cant find it because flashed the rom withot making a back up does any one where to find it.
it had some extras like i could set musicplayer on the first screen,basicly i could set every thing on the desktop. can anyone help me?

I'm not certain, if you are looking for a custom ROM or just Cookies Home Tab CHT , which mainly is the tool to do all the setup, you mentioned.
Greets

yes i think that was a costum rom couse i bought the phone like that.. but now ill try to add this app..thank you

Or you can install nsourm's beautifull rom with CHT included from here

By the way, I'm using nsourm's custom ROM too

Im trying to install one of these roms but it can not be installed. i tryed from sd card too but it says loading...
and i cant install cht too and cookies because the clock and others become to big..

Can you describe the error a little more detailed? I was able to install nsourm's ROM without problems. Did you see the tri-colored screen already?

I tryed to install nsourm_rom_0409.nbh and all of them and cant be installed, i can install roms from shipped roms and those can be installed but this can not...it stuck at 0% and the rom from http://www.filefactory.com/ can not be downloaded Ive downloaded a old one .. couse this says: "All free download slots are in use. You can download this file immediately by upgrading to FileFactory Premium. Otherwise, please feel free to try again shortly. "

You gotta try multiple times, until you get a slot to download a newer version. I tried at least for half a day
The flashing itself worked, but I remember it took more than 10 minutes to finish.
Did I understood right, that you have flashed custom ROM's before?
Greets

I've downloaded the rom and when i try to install it gives me error 262 and it does not continues to be installed stays at 0% ..yes I'have flashed before... but i did not made a backup of that rom
thank you!

so can anyone help me how to put the rom couse it cant be upgraded

Just to be sure i understood your problem: Did you used SSPL with a custom ROM and it didn't work ? What OS do you have on PC ?

yes that is right...im using windows 7 ultimate .It can not be upgradet stays at 0% and then gives an error :S

EROR 262 you can solve this way
- Make shure battery is over 50%
- Soft-reset the device - Don't Skip This Step !
- If is on your PC installed Software-Firewall, Deactivate it (temporery,just to be sure, Reactivate FW later)
- Use orignal USB Kable. (usb data link cable)
- Right click on the RUU.EXE and click on Run as Administrator

- make sure, you choose ActiveSync profile upon connecting the phone to PC
- ActiveSync should be set up completely and Sync connections with Win7 PC should be working without problems before starting with a new ROM

okay thank you guys