Related
Okay, so I'm an idiot. I'm completely lost now. Here's the basic facts:
Hard-SPL install was unsuccessful, but I didn't notice. So I'm still with original SPL.
I started upgrading the ROM with original SPL, which of course crashes at 3 percent.
Now I can't get back into WM. It's stuck at the 'smart mobility screen'.
So the problem is: it won't let me install any ROMs because original SPL is still on there. I can't change to hard-SPL anymore either. The ROM that's on the machine doesn't seem to work anymore. When I try to install an original ROM it says I can't use this utility. I think I need to download an official ROM + installer, but I can't find any from HTC.
Alright, so skip all the noob and idiot comments please, I already know. But where do I go from here?
Please help!
Bricked Cruise
hansdekker said:
Okay, so I'm an idiot. I'm completely lost now. Here's the basic facts:
Hard-SPL install was unsuccessful, but I didn't notice. So I'm still with original SPL.
I started upgrading the ROM with original SPL, which of course crashes at 3 percent.
Now I can't get back into WM. It's stuck at the 'smart mobility screen'.
So the problem is: it won't let me install any ROMs because original SPL is still on there. I can't change to hard-SPL anymore either. The ROM that's on the machine doesn't seem to work anymore. When I try to install an original ROM it says I can't use this utility. I think I need to download an official ROM + installer, but I can't find any from HTC.
Alright, so skip all the noob and idiot comments please, I already know. But where do I go from here?
Please help!
Click to expand...
Click to collapse
First you can try a hard reset!
Here you can download the original shipped rom with installer.
ftp://xda:[email protected]_radio_sign_25.65.30.04_1.58.21.23_Ship.exe
kr.,
Frepke
Update
Update
Okay, so I did the hard reset as described here. No luck.
So I went back to the bootloader screen (original SPL) and tried the original rom and installer from the download link. Again, no luck. It says "Error [294] Invalid Vender ID. This utility cannot be used for your PDA phone. Please check your update utility." The phone was unlocked when I bought it, it's HTC branded. Is there another installer out there?
I've also tried loading several roms by putting them on SD, renamed as POLAIMG.nbh. (including the orginal rom, extracted from the downloaded installer). For the original Rom, it will say 'loading...', then 'checking...' and then it will tell me: "00028002 - not allow". Then it goes back to the three colour spl screen.
There's also a link here on the forum which I'm not sure is good advice.
Three colour screen info
Pola100
Spl-1.25.0000
Cpld-2
hansdekker said:
Update
Okay, so I did the hard reset as described here. No luck.
So I went back to the bootloader screen (original SPL) and tried the original rom and installer from the download link. Again, no luck. It says "Error [294] Invalid Vender ID. This utility cannot be used for your PDA phone. Please check your update utility." The phone was unlocked when I bought it, it's HTC branded. Is there another installer out there?
I've also tried loading several roms by putting them on SD, renamed as POLAIMG.nbh. (including the orginal rom, extracted from the downloaded installer). For the original Rom, it will say 'loading...', then 'checking...' and then it will tell me: "00028002 - not allow". Then it goes back to the three colour spl screen.
There's also a link here on the forum which I'm not sure is good advice.
Click to expand...
Click to collapse
Hi
Ths info I posted relates to the Kaiser (kaiser [nearly] equals Polaris in terms of hardware) and the MTTY is from the ELF forum.
"set 16 0" to tell bootloader to boot the OS after reset.
"task 8" to get your device formatted
I suggest the set 16 0 and a reset to see if that helps, I do advocate you searching for these commands and checking they are applicable.
The info was from this KAISER thread
http://forum.xda-developers.com/showthread.php?p=2103884
HTH
Leon
MTTY
Thanks for your advice guys.
I tried the "set 16 0" command + reset. Still same situation.
Any other tips anyone?
Darn
No more reponses?
It is probably bricked then.
So what's my next move...trash it?
hansdekker said:
No more reponses?
It is probably bricked then.
So what's my next move...trash it?
Click to expand...
Click to collapse
try flashing using sd card
Tupac_Shakur said:
try flashing using sd card
Click to expand...
Click to collapse
I think he wrote already that he tried to flash some ROMS using SD card... (POLAIMG.NBH). Not sure though if he tried re Hard-SPL'ing using the SD flash method...
So I would suggest to retry the HardSPL using the POLAIMG.NBH method (just as if the HardSPL's .NBH file was a normal ROM) if this hasn't been tried yet...
Hey you must careffuly read mtty in kaiser thread.....mtty can brick your device for entire life.....my advice to you is pm GSLEON3
he's the master of using mtty and lot of kaiser user saved by him...
Hope this can help you
cheers
The Facts
When I try to hard-spl through the SD-card, it just says "Loading..." and that's where it stays - Even if I leave it till the battery dies. I tried the 2.10 and 1.10 versions on this page.
Are you sure? This Hard SPL suit for Hermes. You have to use this: http://forum.xda-developers.com/showthread.php?t=375338
TB
Hard-SPL through SD
You're right; I did notice that - however
I had to take an nbh from this page. The reason is that the HTC Cruise Hard-SPL program I found on this page won't let me extract the rom.
I need the rom file to put in on SD!
The Hermes one probably wouldn't work anyway though, thats a good point Where to get the Polaris separate rom nbh? I haven't found it on the forums. Maybe I'm going blind...
How to flash your Polaris using the microSD card [Guide]
hansdekker said:
You're right; I did notice that - however
I had to take an nbh from this page. The reason is that the HTC Cruise Hard-SPL program I found on this page won't let me extract the rom.
I need the rom file to put in on SD!
The Hermes one probably wouldn't work anyway though, thats a good point Where to get the Polaris separate rom nbh? I haven't found it on the forums. Maybe I'm going blind...
Click to expand...
Click to collapse
Hi,
Try this thread :
http://forum.xda-developers.com/showthread.php?t=384084
How to flash your Polaris using the microSD card [Guide]
TB
It's starting to seem really hopeless
Thanks.
Same result. The screen just says "Loading..." and stays there.
hansdekker said:
Thanks.
Same result. The screen just says "Loading..." and stays there.
Click to expand...
Click to collapse
unplug usb and replug it
hansdekker said:
You're right; I did notice that - however
I had to take an nbh from this page. The reason is that the HTC Cruise Hard-SPL program I found on this page won't let me extract the rom.
I need the rom file to put in on SD!
The Hermes one probably wouldn't work anyway though, thats a good point Where to get the Polaris separate rom nbh? I haven't found it on the forums. Maybe I'm going blind...
Click to expand...
Click to collapse
1. You can not flash hard-spl with microSD method! (hard-spl flash use jumpspl to ignore cid-lock. But with microSD card method you will not use jumpspl, so you can not flash hard-spl! (and to use microSD method you have to have hard-spl on your pda)
2. If you unzip hard-spl on your pc will be an RUU_signed.nbh. This is the rom file, but you can not to flash it with microSD.
3. Your device is bricked, I think. Take it to repair!
after an unsuccessful flash, u shud never try to flash again, high chance of permanently bricking your pda. go contact GSLEON3, he saved my kaiser from bricking when i made the same mistake as u. helpful fellow. make sure u donate lol
Accepted Defeat
Hi
I accepted defeat and exchanged the unit.
Thanks for all the help.
H
Hello,
I want to flash my device with 1.66.707.1 rom. I can't download it via HTC official page.
Now I have few questions. According to that I couldn't download it from HTC official page in my country because I've got inappropriate S/N. May I install it on my radio if I supply good (fake) S/N to official HTC page?
I even didn't tray to do this because I'm afraid I can turn my HD2 a into brick.
I don't care about language. I think that after flashing ROM I can download a proper language pack.
Greats.
invalid serial means your phone is vendor locked. (eg t mobile, vodafone or whatever)
even if you download using a different serial the upgrade will fail saying "vendor id mismatch" or something similar.
in theory you need to wait for your vendor to release the update, however in reality installing hspl will allow you to instal the update without getting the error.
go read the hspl threads.
Easy to sey .
It's my first Windows Mobile based phone. I've never installed rom, and yet a cooked one.
I've have some bugs about which I've read on this forum. Those are:
* lack of virtual keyboard while creating a new text message (or any app which need it)
* error while starting digital camera.
All of that disappear after soft reset. That's why I want to install the newest rom.
To not start a new thread is there any way to find out if the rom which I downloaded from HTC suits to my phone? S/N is correct. If I start RUU it will start flashing my device, yes?
Another question. Is it true that every HTC Leo has 576MB RAM but it is locked down?
read this then, it has all the info you need on flashing your phone...
http://forum.xda-developers.com/showthread.php?t=609477
once HSPL is installed you can download an official WWE ROM from this thread and run it as if it were an official ROM for your phone...
http://forum.xda-developers.com/showthread.php?t=623283
y0yster said:
Easy to sey .
It's my first Windows Mobile based phone. I've never installed rom, and yet a cooked one.
I've have some bugs about which I've read on this forum. Those are:
* lack of virtual keyboard while creating a new text message (or any app which need it)
* error while starting digital camera.
All of that disappear after soft reset. That's why I want to install the newest rom.
To not start a new thread is there any way to find out if the rom which I downloaded from HTC suits to my phone? S/N is correct. If I start RUU it will start flashing my device, yes?
Another question. Is it true that every HTC Leo has 576MB RAM but it is locked down?
Click to expand...
Click to collapse
As EddyOS stated, go read my flashing guide THOROUGHLY!!
1. Install HardSPL on your device (best done using WindowsXP or Windows7 32bit).
2. Download the Rom you require from the download site provided and flash using the instructions provided in my guide.
3. Enjoy your new phone
Once you have HardSPL on your phone it will be protected from bad flashes and you will be able to flash stock or custom roms or radios as and when you require. HardSPL is definitely reccommended as it has probably saved hundreds of phone from being turned into paperweights when flashing a bad rom or flashing incorrectly.
If you want to try a custom rom then I would definitely recommend the one in my signature but its totally upto you what you decide to put on your device.
With regards to the 576MB Ram it does seem that its actually accessible but only using the newer 2.02 Roms with specific Radios. This has been tested and verified. It wont be accessible on a 1.66 stock rom though.
Hello,
I tried to flash my device witch rom which is on htc official page.
When I was flashing something went wrong and on 24% upgrade have broken. I did what was write on the program but all the time I have 4 strips red, green, blue and white. Before I turn on the device I have sign of warning.
What I have to do now? Is my phone dead now?
Please answer as soon as you can.
y0yster said:
Hello,
I tried to flash my device witch rom which is on htc official page.
When I was flashing something went wrong and on 24% upgrade have broken. I did what was write on the program but all the time I have 4 strips red, green, blue and white. Before I turn on the device I have sign of warning.
What I have to do now? Is my phone dead now?
Please answer as soon as you can.
Click to expand...
Click to collapse
- What ROM were you trying to flash and what ROM version (and language) do you have on your device?
- Is your device Branded?
- Did you flash HSPL?
- Did you see a progress bar on screen when flashing, or just the colored bars?
- When you get to the tricolor-screen (bootloader) and you connect to your PC, does it say USB after a few seconds, or does it say Serial?
- What went wrong at 24%? Did you unplug the phone, did your system crash, or were you just being inpatient?
If you answer the above questions, someone may be able to help you. Also, start by reading the stickies.
Rom was 1.48.479.1 and I wanted to replace it with 1.48.479.1 because some bugs were annoying me which I mentioned earlier.
Yes my device is branded but it doesn't have simlock.
No I didn't used HSPL because I downloaded rom from HTC using my own original S/N.
When I was flashing I saw brogress bar with HTC logo.
I have those tri-colour screen when I power on the device, but before that I have warning triangle. No it doesn't say Serial nor USB.
What went wrong. I swear I don't know. No, no, no I wasn't impatient. After it hanged on 24% I got error message from the program on PC with UPGRADE ERROR. I've tried to resume like the program said me. But without any effect. What I did was unplug; put aut battery; wait 3 seconds; put battery in; power on and plug in. I'm sure that I was doing everything right because I was following the program.
help
samsamuel said:
invalid serial means your phone is vendor locked. (eg t mobile, vodafone or whatever)
even if you download using a different serial the upgrade will fail saying "vendor id mismatch" or something similar.
in theory you need to wait for your vendor to release the update, however in reality installing hspl will allow you to instal the update without getting the error.
go read the hspl th
hi there i really need help
i have a htc hd2 uk on t-mobile tried to rom update and messed it up , things dont work , i would like to ind software to rom update even htc.com s/n not right message comes up . please help
Click to expand...
Click to collapse
If i have 1.48 and with my serial can`t download 1.66... it is recommended to install WWE 1.66 with serials posted here without HSPL? my device is also WWE and was only sim locked Vodafone. (non-branded)
If you have questions regarding rom or hardspl flashing please ask in the correct thread.
if,when you put your serial into htc website, it doesn't allow you to download, then you MUST use hspl to flash an unbranded rom.
@y0ystet. your phone is branded. sim lock its not connected to vendor lock.instal hspl and try again, same rom.
@lakhbeer, did you flash hspl first? more detail please, messed up? doesn't work?
@rayman your phone is vodafone locked.
I repeat, the htc website doesn't accept your serial, you are provider locked and that is not connected to sim lock/unlock.
I sent an e-mail to HTC about that. They said I can send the phone to them.
I found sth out. If I hold the volume down and connect the usb cable I have a message on my screen. On screen which have three colours on green I have: "Upgrade Rom code error. Please try again" And on the white I have: "Serial".
Is there anything I can do about that?
But don't say me to flash witch the HSPL. I won't do that on two reasons:
I've never do that
If I send it to service I'll void my warranty.
What would you suggest to do?
I've solved the problem .
you going to let people know for future use?
How to fix ROM error on VODAFONE UK solution
I also have a HTC HD2 bought from Vodafone.
I flashed my mobile and installed Pandora 1.4 ROM...it was always freezing my Leo every time I looked at docs tab, so I decided to install shipped Leo ROM 1.66 and that is when things went wrong, same problem as you have now, so I downloaded h**p://w w w .4shared.com/file/205652004/1bf6c7ce/RUU_Leo_Vodafone_UK_1434051_Ra.html
aka the original ROM from Vodafone UK and it is working now....but now I am no sure if I wanna try more roms because next time I can be stuck with error screen forever.....
made this video for anyone whos unsure on how to do it, hope this helps someone.. feedback apreciated
INFO FROM VIDEO DESCRIPTION INCASE ANYONE NEEDS IT
In this video i show you how to install windows phone 7 to your htc hd2.
DO THIS AT YOUR OWN RISK
WP7 STOCK ROM + MAGLDR 1.12 + LATEST LEO512/1024 RADIO
http://www.mediafire.com/?dx3k459a2k3m3dr
ZUNE Software (Sync Music, Video, Pictures & Apps)
http://www.mediafire.com/?pesqg3asdoghea3
____________________________________
POSSIBLE WIFI FIX: PULL OUT your SD CARD and RESTART your PHONE
IF YOUR HAVING ISSUES WITH MOBILE DATA (INTERNET) NOT WORKING THEN CHECK OUT MY POST ON XDA, I HAVE TRIED TO INCLUDE AS MANY CARRIERS AS I COULD, IF YOU HAVE ANY THAT I COULD ADD THEN PLEASE LEAVE THEM IN THE COMMENTS
http://forum.xda-developers.com/showpost.php?p=10635210&postcount=1
____________________________________
HOW TO INSTALL HSPL
NOTE:To install this HSPL there must be SPL 1.42.0000 on your device. Otherwise the installation will fail! To check your SPL version, hold the Volume Down button and do a reset.
It is possible to downgrade to this SPL, by just flashing to an Official ROM with this SPL version.
1. Download HardSPL package from http://www.mediafire.com/?44nvdoc45zykmen and extract to an empty folder
2. Synch Phone with PC in Windows Mobile!!! It has to be connected to activesync or WMDC via USB cable
3. Run HSPL3_PKG.exe from your pc and read all the text carefully
4. When finished reading click next in the HardSPL program
5. The program will now check the usb connection and enter bootloader screen (tri colour)
*You can select between SPL2.08.0000 or 2.08.HSPL. This is to avoid people with 1024LEO's installing an incompatable version and bricking their device*
6. Select 2.08.HSPL for HardSPL and click NEXT.
7. Your choice will be flashed to your phone.
8. When its finished the HardSPL program will pop up a box saying "Successfully Done" and the phone will reboot.
9. Click ok to terminate program.
10. Congrats, you just flashed HardSPL.
____________________________________
Visit this site for information on dual booting android and WP7, the site is in Chinese so it has to be translated but the instructions are clear enough.
http://translate.google.com/transla...rcesteam.com.cn/thread-25910-1-1.html&act=url
Thank u - good guide!
Sent from my HTC HD2 using XDA App
can i flash back to wm mobile if i flashed wp7?
peeewee said:
can i flash back to wm mobile if i flashed wp7?
Click to expand...
Click to collapse
yes, just flash a stock or custom rom back to your phone
Download
Hi where do i get to download it? please...
Thanks!
Can you post the link?
TheAgent1982 said:
Hi where do i get to download it? please...
Thanks!
Can you post the link?
Click to expand...
Click to collapse
its in the description
thanks, i needed this guide!
Any chance you want to make a video of how to get the market working?
saw the video and i must say it's pretty straight forward, well done mate! this should be a sticky topic i reckon. although i'm quite happy with my hd2 running android and have no plans of flashing to w7, i'll keep this in mind should i decide to take the plunge. much appreciated.
Dear People
i was trying to install WP7 on my HD2. I did not check my HSPL version I guess it is 1.42
I downloaded the rom and installed MAGLDR112
It iis displaying white screen with a message this operation will delete all your personal data and reset all setting to manufacture default Press volume UP and all
It is not entering in bootlegger mode what shall I do please help me guys
Thanks.. it's a great vid!!! juz a question, how do i go about flashing back to WM6.5 custom ROM??
isit the usual way by entering boot mode and use customRUU to flash any workable ROM??
blacker87 said:
Thanks.. it's a great vid!!! juz a question, how do i go about flashing back to WM6.5 custom ROM??
isit the usual way by entering boot mode and use customRUU to flash any workable ROM??
Click to expand...
Click to collapse
yep that is it.
Thanks....!!
deadman_walking1 said:
Dear People
i was trying to install WP7 on my HD2. I did not check my HSPL version I guess it is 1.42
I downloaded the rom and installed MAGLDR112
It iis displaying white screen with a message this operation will delete all your personal data and reset all setting to manufacture default Press volume UP and all
It is not entering in bootlegger mode what shall I do please help me guys
Click to expand...
Click to collapse
You need to only hold volume down (not both Up and Down) and then switch device on
Could someone please HELP !!!!
i flashed the WP7 ROM from DFT everything works fine except for my memory card, the phone seems like it dsnt read anything from the SD card as if it wasnt there ?
What should i do
windows live id?
having trouble signing in with windows live id everytime i try it says my windows phone needs to be activated is this right or am i doing something wrong?
Thanks in advance mimic
cd78 said:
Thank u - good guide!
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
just can not run a 1.12 on his MAGLRD HTC HD2. I uploaded all HSPL as explained in the post to install WM7, but could not go. Does anyone know where I go wrong? MAGLRD start, the screen on the HTC HD2 blacks, but not to go to load is about 5 minutes to 0%.
Thx. Nice guide, worked perfecly for being the first time flasher
Only have the problem that i cant connect with my 3g.
Dukan91 said:
Could someone please HELP !!!!
i flashed the WP7 ROM from DFT everything works fine except for my memory card, the phone seems like it dsnt read anything from the SD card as if it wasnt there ?
What should i do
Click to expand...
Click to collapse
Many sd cards are not recognised/compatible with WP7. You'll see a thread in this forum dealing with the compatibility issue and trying to identify which sd card types do work.
mimicuk said:
having trouble signing in with windows live id everytime i try it says my windows phone needs to be activated is this right or am i doing something wrong?
Thanks in advance mimic
Click to expand...
Click to collapse
That's right you need to get a Windows live activation code from MS. There is a hack that needs to be applied to "trick" the market into thinking the device is an HD7, but you still will need the activation code. See here
saletije said:
just can not run a 1.12 on his MAGLRD HTC HD2. I uploaded all HSPL as explained in the post to install WM7, but could not go. Does anyone know where I go wrong? MAGLRD start, the screen on the HTC HD2 blacks, but not to go to load is about 5 minutes to 0%.
Click to expand...
Click to collapse
Do you have hspl of 2.08.hspl or 2.08.0000. You need the hspl bit at the end. Also do you have a 50 series radio of at least 2.08.50 installed?
idono said:
Thx. Nice guide, worked perfecly for being the first time flasher
Only have the problem that i cant connect with my 3g.
Click to expand...
Click to collapse
You will need to manually enter your APN details.
idono said:
Thx. Nice guide, worked perfecly for being the first time flasher
Only have the problem that i cant connect with my 3g.
Click to expand...
Click to collapse
you need to use APN settings, google your apn settings for your operator then enter them into the settings menu
Hi every one. I had a problems with HD2, my original ROM was with a lot of problems, it restarted without no reason and so on. My colleage suugested to flash with another ROM, so I tride to flash a new ROM, did a Hardspl2 and now my HD is bricked, with triangle and no ROM also shiped (donwloaded from HTC web page by serial) is not working. Anybody help me? I tried lot of ROMs and no luck at least .... Triad also flash with original ROM via Micro SD no luck... Please help me!!!! URGENT!
prieditis said:
Hi every one. I had a problems with HD2, my original room was with a lot of problems, it restarted without no reason and so on. My colleage suugested to flash with another room, so I tride to flash a new room, did a Hardspl2 and now my HD is bricked, with triangle and no room also shiped (donwloaded from HTC web page by serial) is not working. Anybody help me? I tried lot of rooms and no luck at least .... Triad also flash with original room via Micro SD no luck... Please help me!!!! URGENT!
Click to expand...
Click to collapse
Firstly its "ROM" not "room".
What do you mean "with triangle" ??
Which HD2 do you have and which ROM did you try flashing?
Can you get into tri-color bootloader mode?
Sorry i post my thread quickly. Yes i tried to flash a ROM, i have HD2 512MB. I tried to flash a 3.14.405 rom. triangle - i can get in tri-color bootloader mode, but when i try also flash original rom there is no result, it crashes on 9 or 17%. Triangle is a sign when i switch on a device, i believe it means ther eis no windows/rom on device
prieditis said:
Sorry i post my thread quickly. Yes i tried to flash a ROM, i have HD2 512MB. I tried to flash a 3.14.405 rom. triangle - i can get in tri-color bootloader mode, but when i try also flash original rom there is no result, it crashes on 9 or 17%. Triangle is a sign when i switch on a device, i believe it means ther eis no windows/rom on device
Click to expand...
Click to collapse
your device is not bricked... get into bootloader and do a task 29 (LOOK IT UP)...
Then start from scratch... Magldr, then whatever ROM you want.
Can you explain me? Please step by step... Thanks in advance
prieditis said:
Can you explain me? Please step by step... Thanks in advance
Click to expand...
Click to collapse
you need to take a leap and search for it... Here is something on youtube i found.
http://www.youtube.com/watch?v=DtTDuc4V4cU
EVERYTHING you need is on XDA if you look for it...
prieditis said:
, my original room was with a lot of problems, it restarted without no reason and so on. ..with triangle and no room aURGENT!
Click to expand...
Click to collapse
... OK, no room = homeless!
If you can't pay rent, I'm afraid I'll have to ask you vacate the area.
Possible fix stuck bricked hd2 radio no rsa information
Please read the whole post first sorry about the mess it is my first post thanks to everyone here on xda who came up with everything i used to do this There is guides for this xda has a lovely list of tmous roms if you are on t mobile in the us http://www.xdafil.es/index.php?path=HD2/TMOUS/
i would start with the RUU_Leo_1_5_TMOUS_2.02.531.MASD_S__Radio_Signed_15.29.50.07U_2.06.50.04_TeleNav-5.5.42.zip
extract the .exe file if it has one than extract the RUU_signed.nbh from the .exe file using win war or 7 zip than rename it to LEOIMG.nbh and place it on a newly formatted microsd not a microsdhc and i had problems with anything over class 4
place it in your phone and hold the volume down button and power button as loading comes up let off volume down power button will start the flash(i was only able to do complete flashes in the freezer if not it would hang or get radio errors)
i also had a tmous which did not want to flash the radio i would get an an error and rsa fail it sounds crazy but i wrapped it in plastic and stuck it in the freezer for a while before and during the flash this was the only way i could install the radio and actually see rgd information on boot screen after this first one you will have an old test rom with an old spl you cannot change to hspl from here i also was not able to go straight to 2.10, i had to step up from RUU_Leo_1_5_TMOUS_2.03.531.6_Radio_Signed_15.30.50.07U_2.06.50.23_3_Test.zip, to RUU_Leo_1_5_TMOUS_2.03.531.6_Radio_Signed_15.30.50.07U_2.06.50.23_3_Test.zip the same way i did the first one,hard resetting after each one and let it open windows completely to know it is working. than i believe there is an hspl3 file somewhere out there with all thanks to DarkForces Team HardSPL3 by bepe and Cotulla i will try to attach it that will work with spl 2.02 wich you should now be on now you can download your radio in the master radio thread http://forum.xda-developers.com/showthread.php?t=611787
i also just renamed the ruu_signed.nbh to LEOIMG.nbh and ran through sd i seem to have problems through usb and i was trying to be careful with the radio
once you got the radio you want you could flash the rom preferably running task 29 before or get yourself magldr to install through nand i also stuck my laptop an the freezer with the phone to get wp7 completely installed i did all this mess with a phone that had a broken screen i think there is like thermal compound over the processor to the case that is not on right and overheats when not in the operating system like a crappy old laptop with its fans full of stuff trying to install xp. and while a stock rom was being installed the usb was pulled during the radio installation i hope this helps i belive i saw one post to stick it in the freezer out of everything that i think helped the most.i also notice i have to put it in the freezer at boot too sometimes or i will get a fatal hit error i think its just over heating..... i also have an hd2 which has never been opened before that i have never had to stick in the freezer it gets flashed quite abit right now running gingerbread on normal hd2 and wp7 dual boot android 2.2 on the one i had to freeze i hope this helps i was here for weeks reading reading i was stumped cus my first hd2 and g1 were so eazy i will update this post once i stop being lazy and open the phone again to replace the goop to see if that is the problem
Thank you for reading my jumble and thanks again to all you phone heads here on xda which without you none of this would be possible and i would not have wp7 and gingerbread on my hd2 : D
I did a task29, flash a ROM succesfully, but now it' s stucked in HTC loading mode (Shows a HTC and nothing happens)
prieditis said:
I did a task29, flash a ROM succesfully, but now it' s stucked in HTC loading mode (Shows a HTC and nothing happens)
Click to expand...
Click to collapse
succesfull only one time, now i tried reflash an original rom once again and no results, still stucked in triangle. It's a first time when something like this happens
P.S. Sorry for my english..
spyderman33 said:
you need to take a leap and search for it... Here is something on youtube i found.
http://www.youtube.com/watch?v=DtTDuc4V4cU
EVERYTHING you need is on XDA if you look for it...
Click to expand...
Click to collapse
no luck at all I tried it once and have succesfull rom update, but it stucks when started with HTC logo, i tried second time and still no luck. Please help me.. all the time now also for original rom it says that this room is not for that device
original rom
you have to find the original rom shipped with your phone like here i am tmobile usa roms you have to find your carrier and country and start with one of the first ones i started with my second one RUU_Leo_1_5_TMOUS_2.02.531.MASD_S__Radio_Signed_15.29.50.07U_2.06.50.04_TeleNav-5.5.42.zip and i kept getting stuck screens when it was hot turn it off maby find some silica gel (lil rocks that come with everything to absorb water) wrap it in plastic and throw it in the freezer does the back of the phone get real hot during flash
i have shipped original rom, still no luck
not the newest one
you need one of the first test roms this was the only way i got mine to work i had to go from 2.02 to 2.03 to 2.05 hard resetting after each install making sure they completely went in what carrier are you and where are you
Still stuck?
Download HSPL 3.zip from page 1,
Run the program;
a) select 2.08.000 (not HSPL) and you can flash stock (HTC) ROM with no damage or aftermarket changes on your phone.
b) select 2.08.HSPL and you can flash whatever you want
Install MAGLDR 1.13
Flash ROM
Make sure you follow the instructions EXACTLY. You can find these all over XDA, look at all of my posts if you need to.
stepthehen said:
Download HSPL 3.zip from page 1,
Run the program;
a) select 2.08.000 (not HSPL) and you can flash stock (HTC) ROM with no damage or aftermarket changes on your phone.
b) select 2.08.HSPL and you can flash whatever you want
Install MAGLDR 1.13
Flash ROM
Make sure you follow the instructions EXACTLY. You can find these all over XDA, look at all of my posts if you need to.
Click to expand...
Click to collapse
Hi, thanks a lot. Only, SPL for original rom was 1.42000 is it ok to flash with 2.08.000 ? And why i should install MAGLDR 1.3 ? Thanks in advance,
Ok, now i dont understand anything. My original SPL was 1.42, i did Hardspl 3, after that tried flash original rom, process stuck on 96%, after that i tried once again stuck on 9% and says rom not compatible with device. And its like a hidden circle, my phone is acting like that all the time. I tried task29, tried all HSPL, also 1.4200, 1.66 and so on. Can anybody help me? my skype nick is martins.prieditis , maybe someone can assist me?
Ok now its fixed. I did a HSPL4, due to which original rom freeze on 0%, but 3.14 didnt start up on loading OS (white screen with HTC logo))or freeze on 99%. Than went back to shipped 1.42, stock room succesfylly flashed and did a SSPL_RUU. Now the only problem is that my LEO restarts when it gets hot. Any ideas how to fix it?
Thanks all for youre help (regarding my previous issue) !
Overheating??
As mrpoe stated in post 9, One of his phone had to be put in the freezer to be able to flash anything otherwise it will get hot and freeze.
Also the motherboard is most likely broken and you cannot get it to work without freezing or it will keep rebooting...
The best thing to do if you still have warranty is to Keep stock SPL and stock WM6.5 and return for warranty.
It will not function the same again.
Hello everyone!
First off I'd like to start by telling you I'm new here and I don't know much about rooting so I'm reffering to you for help... Here is what happened... I have a G2 Hero, running android 2.1. So one day I decided to root it and install a custom rom. I downloaded Universal Androot-1.6.2-beta5 and ran it on my mobile.
Afterwards I formatted my sd card then restarted the device and downloaded rom manager from the market and flashed Clockwork. After this I put CyanogenMod-6.1.0-RC1 in the root dir of my sd card, tried to install it from [HOME] + [PWR] buttons menu and an error saying [status 7] showed up... Now im stuck in an endless bootloop... I cannot sync the device with my computer, cannot hard reset.. I can access Hboot menu but there isnt anything I can do...
What should I do to restore it to stock and then try the whole thing again but with a new rom? Thanks in advance!
Anyone?
Have you tried running an official HTC RUU? They can be found in a thread on the development page
Sent from my HTC Hero using XDA App
you have to search for "RUU for htc hero gsm". There's an official website for that. Download RUU (about 80-90mbytes as i remember) and start it. As i remember you should power your phone in HBOOT mode (VOL DOWN + POWER), connct to PC and run RUU and follow the wizard.
It will flash stock 1.5 android.
After reeboot it should inform you that there's an update, but if you want to flash different recovery, you shouldn't update your phone.
Then you should follow "How To - Root Your HTC Hero in One Click" (can't post links yet).
Ok first of all thank you guys for the help! So I downloaded RUU_Hero_HTC_WWE_2.73.405.66_WWE_test_signed_NoDri ver.exe from the main thread. At first I had some connection problems but then I switched the front panel USB to one of the rear which are 2.0 and continued. Now I'm stuck at a later step. Tried to update it but an error message saying "ERROR[131]: CUSTOMER ID ERROR Please get the correct ROM UPDATE UTILITY and try again" displays. Which RUU would you recommend?
I used official RUU from htc.com site. It just worked for me.
This one is in Polish, but i believe, you will find one in your language or in English
http://www.htc.com/pl/supportdownload.aspx?p_id=283&cat=2&dl_id=671
//edit
You must provide a valid serial number from sticker behind the battery and select a corresponding file. It will be only one i think
//edit2
There's something more about this error 131:
http://androidforums.com/707610-post16.html
Apparently you just used wrong RUU... Try one from prev link.
Ok, soI downloaded RUU_Hero_HTC_WWE_2.73.405.5_WWE_release_signed_NoDriver from the official HTC website and go past last error but afterwards I encounter another one. This time it is "ERROR[140] BOOTLOADER VERSION ERROR, Please get the correct ROM Update Utility and try again"
Any suggestions this time?
hskiller said:
Ok, soI downloaded RUU_Hero_HTC_WWE_2.73.405.5_WWE_release_signed_NoDriver from the official HTC website and go past last error but afterwards I encounter another one. This time it is "ERROR[140] BOOTLOADER VERSION ERROR, Please get the correct ROM Update Utility and try again"
Any suggestions this time?
Click to expand...
Click to collapse
You could try the carrier one if you got it from Orange flash the ruu which is for Orange uk
Nope, my phone is from Europe but I dont think I got my cd... I'll sure search for it. Any other suggestions?
Maybe you can find a workaround there:
http://forum.xda-developers.com/showthread.php?t=684504
I am currently trying with this one:RUU_Hero_HTC_WWE_2.73.405.38_WWE_release_signed_NoDriver. But it seems to be stuck on "Sending.....Updating the ROM image on your Android phone" The progress bar on the phone's display is almost complete but wont move anymore. I have waited for 20 minutes now...
EDIT: I finally fixed it! I didn't realise I had to have the same RUU version like my software version. Thought I had to downgrade. Nevermind it's all OK now and it's time to try the whole rooting and custom ROM process again
I want to thank all of you guys that helped me!
Good for you man
Just out of pure couriosity, what rom will U use afrer your phone get rooted?
You have to use your carrier related stock rom/exe. What is your carrier?
Perdita2000
Sent from my Hero using XDA App
I havent decided yet. It will definitely be some Android 2.2 ROM Maybe Elelinux Speedmachine.