Database Users

official at&t callerID update bricked my phone.. :(

after my phone rebooted once the update was complete, it wont get passed the "at&T World Phone" white screen... SOMEONE PLEASE HELP ME!!!! i was using a stock at&t pure with the stock rom. i can not upgrade hardspl or ANYTHING any suggestions on how to get my phone to boot? hard-reset went through with no signs of failure but it still will not boot up after that finishes... sorry if its something im overlQQKing, but i just cant figure it out. n yes i have researched although obviously not enough at this point. Thanks to anyone who can help in advance. forgive my stupidity!!!

......
noone?????

The HTC Pure updates hosed my phone too, I had already applied hard-spl to my Pure and i've flashed it with dozens of roms. Since I was currently using one of the "Stock" AT&T roms posted on XDA I figured I could apply the updates. Unfortunately after applying the update my phone froze at the boot loader. I was forced to flash my rom using the memory card method and then restore a backup.
you could try putting the phone in SSPL mode manually, (reset button+volume down), the run hard-spl hard-spl in manual mode.
you can then flash your rom using the memory card method. (FAT32 formated memory card, rom file renamed to topaz.nbh copied to root of flash card, reset button+volume down to enter SSPL, power button to confirm flash).
All this assumes you've already tried to hard reset your Pure (reset button+vol up+vol down)

Thanks for the reply! Unfortunatly, i tried the manual method and after it hanging at 0% for about 5 minutes, i keep getting error [262] update error.. (communications error) is this becuase i can not sync with mobile device center (win7)? I really dont want to just have to toss the phone! I have had an at&t tilt, at&t fuze, and now the at&t pure, and this is the only phone i have had this problem with for some reason...

Try Unplugging Your Pure From the computer Take Out the Battery Put the Battery Back in Mean While Restart your computer and Press Power And Volume Down At the Same time on your Pure If its on the colored screen your good,..Make sure your system is online and your not downloading anything and plug in your Pure to the computer it give it about 2 minutes to download the HTC USB driver then once its done your phone will say USB on the bottom of the Red Green Blue And White four color screen Then open up one of your ROM's and Flash it,....Do You Have Windows Mobile Device Center Installed?
If Not here is the Link
http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/device-center-download.mspx
If you do already you need to uninstall the Driver update for windows mobile media center then install it again .

i can get the bootloader screen just fine! i just can not get hardspl to flash onto it. it sits at 0% every time. the phone will not boot so i can NOT get into mobile device center. The tri-colored screen comes up with no problem and it says USB on the bottom, so the drivers are already installed. I even tried hard-reset and still no luck

There was an additional cab file I needed to install to HSPL the Pure
"enablerapinew.cab"
basically the machine just would fail to load the HSPL without it
but it still functioned afterwards, does yours?
Do a search on XDA find and DL the cab (or I could attach a zipped copy)
If you can still access the device,
just copy enablerapinew.cab to any temp dir on the device
the execute it through fileexplorer
then go back to installing the HSPL (mine then worked fine)
If you haven't already, You should go to
http://forum.xda-developers.com/showthread.php?t=520312
you'll find troubleshooting info and a link to the extra cab there
If you really are bricked at this point , it sounds like nothing has actually
been changed on your device yet? its just frozen should be still under warrentee? Unless anyone else has a better suggestion you should be
able to return it for exchange to ATT
Good Luck
KJL

It sounds like Windows is not properly recognizing your device when it is plugged into the USB port while in SSPL mode.
Have you tried different ports?
Is there another computer you can use?

another thought about returning under warranty
on the boot page of the stock Pure it indicates HSPL 1.83.000
After you update the HSPL it will say HSPL "1.83.Olinex"
this normally an indication of a successful update,
but it will probably void your warranty if they just look at the boot screen
This is true for all Pure (and Tmobile Compact V) Rom upgrades
The Stock Pure came with 6.5 and therefore the 1.83.00 HSPL
The Diamond2s did not, so their solution which reverts to 1.63 <?>
will not correctly revert to 1.83.00 on the Pure.
No way to correct this yet as far as I know,?
All the "reverts" are geared toward the Diamond2s, not the Pure.
But If your boot screen indicates 1.83.00 before it freezes
I'm fairly sure its still entitled to a warranty repair/replace
How could they tell the cause of the failure
was a reburn as opposed to natural causes?
Good Luck
KJL

When you put the phone into a manual bootloader mode... Mobile Device Center becomes obsolete.
HardSPL is only needed for unofficial roms. Forget HardSPL for the time being. The goal here is to get your phone operational. Just download the official HTC WM6.5 WWE rom and flash that. Put phone in manual bootloader mode and run the Rom installer.
As long as your phone is in bootloader mode and says "USB"... then your set to go.
Another solution is to try another PC. You'd be surprised how often that will resolve your issues. Perhaps find an XP machine and install Activesync (so it loads the bootloader USB drivers). I had to do that on several occasions when my main PC refused to flash my mobile device.

I did both of the updates htc has for the pure. Both worked fine. I am on the origianal rom. It does reboot your phone and stays on the white screen for a min then it loads the update and the phone starts.

The offical ROM comes back with a wrong vender ID error I guess cause its a "pure" and not the HTC branded "topaz"... NOW what should i do??? Seems like i NEED hardspl so i can flash any ROM, as from what i researched, there IS NO AT&T Pure rom that has been released. I still cant figure out why a hard-reset will not work though.... This is REALLY starting to get me angry!!!

Just for reference, the Pure's ID is TOPA210 32M
SPL-1.83.0000
The official hotfixes worked fine for me as well. Did you apply the hotfixes on the original ROM that came with your Pure?
Also, does the official HTC Touch Diamond 2 ROM work for you? If so, the hotfixes for the Pure are irrelevant, as are any future updates released for the Pure. You should look for updates for the Touch Diamond 2 on the Worldwide HTC site.
If you needed to do a warranty claim, the closest you can get to returning your phone to stock/shipped form is to use the ROM dump using HardSPL and hope they don't notice that the SPL is different. Currently, there's no way to return the Pure back to completely official software.
A hard reset simply wipes everything off and restores everything back to what is contained in just the ROM you currently have on it. If you've flashed your phone at all, you've already wiped out the original ROM that came with it.

It is still the STOCK ROM. I have never flashed it yet.. The topaz rom will not flash due to a vender ID error. The spl is still stock also... i think thats is why i am having this problem. I bought the phone off craigslist so returning it to AT&T is NOT an option either way. My only solution is to find a fix. (or trash it) I really appreciate all of your suggestions and input so far. You guys are by far the best board around! I am a LONG time follower, but a few-time poster. Obviously i have little to contribute to the board.

Can I trouble you to dig up a few version numbers? It'd help evaluate your situation so we can see which options are best for your case.
ROM version? You can find this in Device Information. Start --> Settings --> System --> Device Information
Bootloader version? Do a soft reset while holding down the volume down button on the side until a screen with red, green, blue, and white, ordered top to bottom, shows up. It should be the second line starting with "SPL-..."

The ROM is the STOCK AT&T ROM (again...) I CAN NOT go to start;.... because if you noticed in the first post, the phone will not boot past the white "AT&T WorldPhone" screen... the spl is stock also incase you missed that part. (1.33.0000) I have never flashed the divice. EVERYTHING IS HOW AT&T SELLS THE PURE OUT OF THE BOX! NO MODS. NO FLASHED ROMS. NO HardSPL... NOTHING! STOCK!!! (for those overlooking the details in my previous posts) I have no doubt you guys (n hopefully a few girls ) will help me fix my issue. I'm just REALLY anxious for it to happen sooner than later!

Have you tried downloading the official rom here on xda and renaming it to TOPAIMG.nbh and update using the sd card method?
Here is the thread:
http://forum.xda-developers.com/showthread.php?t=600339
The download is in post #1

I have downloaded the official ROM. Although I thought it is still concidered "custom" and that you need spl updated to install it... Am I wrong about this? Also, by using the SDcard to flash, do I NEED to have hardspl on the device? If yes, I can not use this method, as I have stated before that the spl is still stock and NOT updated in any kind of way. NOTHING on the phone has been updated or flashed. Will this method still work then???? I am at work for 3 more hours and then will go home and try it either way and come back to update you all on the results. Again, THANK YOU for your continued support in helping me out!! At this point, I will send a donation via paypal to whoever can get me out of this hole!

jromeo350 said:
I have downloaded the official ROM. Although I thought it is still concidered "custom" and that you need spl updated to install it... Am I wrong about this? Also, by using the SDcard to flash, do I NEED to have hardspl on the device? If yes, I can not use this method, as I have stated before that the spl is still stock and NOT updated in any kind of way. NOTHING on the phone has been updated or flashed. Will this method still work then???? I am at work for 3 more hours and then will go home and try it either way and come back to update you all on the results. Again, THANK YOU for your continued support in helping me out!! At this point, I will send a donation via paypal to whoever can get me out of this hole!
Click to expand...
Click to collapse
You can flash hard SPL the same way by renaming the .nbh file to
TOPAIMG.nbh

jromeo350 said:
I have downloaded the official ROM. Although I thought it is still concidered "custom" and that you need spl updated to install it... Am I wrong about this? Also, by using the SDcard to flash, do I NEED to have hardspl on the device? If yes, I can not use this method, as I have stated before that the spl is still stock and NOT updated in any kind of way. NOTHING on the phone has been updated or flashed. Will this method still work then???? I am at work for 3 more hours and then will go home and try it either way and come back to update you all on the results. Again, THANK YOU for your continued support in helping me out!! At this point, I will send a donation via paypal to whoever can get me out of this hole!
Click to expand...
Click to collapse
Actually that is supposed to be an officially signed rom. If that is true it will work with the stock spl. It will either work or it won't. Also, as stated in the response after yours, you can apply the hardspl via SD as well.

[TUT] Flashing your First GSM 512LEO Rom - With HSPL4 (For Noobs)

PLEASE READ THE *FAQ* BEFORE ASKING QUESTIONS OR LOOK AT *THIS* THREAD THANKS TO RZASHARP
ALSO DEFINITELY CHECK OUT THE COMPLETE VIDEO GUIDE TO EVERYTHING *HERE* THANKS TO [★]
This Guide is designed ONLY for HD2 with 512 Mbytes ROM. If you are unsure then goto Settings, System, Device Information, Hardware Information and look at the Flash Size.
If you have a LEO with 1024MB ROM then please use *THIS* guide.
Before starting, backup anything you might want to keep after the new Rom has been flashed as all contacts, emails, texts, notes, Internet BookMarks WILL be lost!!
PimBackup is good and free (copy any mms attachments to your storage card or computer seperately)
*ONCE YOU HAVE FLASHED A HARDSPL ITS PERMANENT. YOU DONT NEED TO DO IT AGAIN WHEN FLASHING NEW ROMS OR RADIOS*
*DO NOT start another process while the flashing process is taking place*
*DO NOT click off of the status bar... Let it stay in the foreground*
*DO NOT let the Screensaver (on your pc) activate*
Any of these can lead to a bad flash and possibly brick your phone
*FLASH HARDSPL BEFORE FLASHING ANY CUSTOM ROMS OR RADIOS*
1. YOUR DEVICE MUST HAVE AT LEAST 50% BATTERY POWER FIRST BEFORE ATTEMPTING EACH STAGE
--------------------------------------------------------------
--------------------------------------------------------------
2. FLASH HARDSPL (REQUIRED!! DO THIS BEFORE ANYTHING ELSE)
The Original HardSPL Thread is *HERE*
NOTE: If you have Vista or Windows 7, update WMDC to v6.1 *HERE* first
NOTE: Turn OFF any AntiVirus Program first as it WILL interefere with the flash (there is NO harmful code in the program)
Installing HardSPL4 via ActiveSync with USB Lead (thanks to Bepe)
Note: HardSPL CANNOT be installed via microSD Card.
IMPORTANT: To install/uninstall this HSPL3 there must be any SPL version from this list on your device:
SPL 1.42.0000, SPL 1.62.0000, SPL 1.66.0000, SPL 2.07.0000, SPL 2.08.0000, SPL 2.10.0000, SPL 3.03.000
To Uninstall you can flash a Stock ROM via SD card or use HSPL3 application (You need select 2.08.0000 or 3.03.0000 in the choose screen)
1. Download HardSPL4 package from *HERE* and extract to an empty folder
2. Synch Phone with PC in Windows Mobile!!! It has to be connected to activesync or WMDC via USB cable
3. Run HSPL4.exe from your pc and read all the text carefully
4. When finished reading click next in the HardSPL program
5. The program will now check the usb connection and enter bootloader screen (tri colour)
*You can select between 2.08.HSPL 2.08.0000 HSPL3.03.0000 or 3.03.HSPL. This is to avoid people with 1024LEO's installing an incompatable version and bricking their device*
Android / WP7 / MAGLDR don't support HSPL3.03/OSPL3.03.
You need HSPL2.08 to run Android / WP7 / MAGLDR
6. Select 2.08.HSPL OR 3.03HSPL for HardSPL and click NEXT.
7. Your choice will be flashed to your phone.
8. When its finished the phone will reboot.
9. Click ok to terminate program.
10. Congrats, you just flashed HardSPL.
NOTE: You can also install HARDSPL by entering Bootloader mode manually, then running the HSPL4.exe program once you see 'USB' at the bottom of the tri-colour screen.
*Go into BootLoader Mode (turn off phone, then press and hold the VOLUME DOWN then Press and hold the POWER button. After about 3 seconds the tri-coloured screen should appear). Verify the screen shows the SPL or HardSPL you installed*
--------------------------------------------------------------
--------------------------------------------------------------
To Remove HardSPL from your Device or Flash back a Stock Rom and Stock SPL for Warranty Purposes
You can remove the HSPL by flashing an original SPL from microSD card OR by running the HSPL4 application (You need select 2.08.0000 or 3.03.0000 in the choose screen).
* You can also use the microSD Card method to flash back your Stock Rom and Stock SPL that you originally had on your phone*
- Download a shipped Rom from *HERE*
- Rename the extension to .zip
- open it with winzip and extract the RUU_signed.nbh file to a folder
- Rename it to LEOIMG.nbh and copy it to the root of a microSD card thats been formatted to FAT32
- Insert your storage card into your phone
- Enter Bootloader and follow onscreen instructions to flash
--------------------------------------------------------------
--------------------------------------------------------------
3. DOWNLOAD AND FLASH YOUR PREFERED ROM
NOTE: Check the Roms Thread for any specific Flashing instructions. If there arent any then you can use the following guide.
Flashing Via ActiveSync
1. Download your prefered Rom from the LEO Rom Develpoment Page and unzip/unrar it to your computer
2. REMOVE SIM and microSD CARDS!! (this is a precautionary measure and is not compulsory)
3. Turn phone back on and wait until it syncs with your PC
4a. If your Rom is a .exe (customRUU.exe is already included in the Rom file) then run the file
4b. If your Rom is a .nbh file then run the CustomRUU.exe from the Roms Folder (if one isnt included then download it *HERE*)
5. Follow onscreen instructions to set up your New Rom
6. Once phone has gone through the customisation procedure then replace Sim and microSD Cards
7. Perform a Hard Reset to clear any leftover data from your previous Rom (see intructions at bottom).
8. Set up phone as required and job done.
Flashing Via MicroSD Card
NOTE (PLEASE READ): If you flash a Stock Rom via microSD Card then it will overwrite your HardSPL with a stock SPL included in the nbh file. This does not apply to custom roms as they do not include an SPL. BE CAREFUL!!
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the LEO Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the .nbh file to LEOIMG.nbh
4. Copy the LEOIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Reset the device while pressing the volume down button to enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.
--------------------------------------------------------------
--------------------------------------------------------------
4. FLASH PREFERED RADIO (OPTIONAL)
For more information about compatible Radios go *HERE*
Flashing Via ActiveSync
1. Download your required Radio and rename the extracted file to RUU_Signed.nbh
2. Sync your phone with the PC
3. Run CustomRUU.exe from the Radio's Folder and follow the instructions (if one isnt included then download it *HERE*)
Flashing via MicroSD Card
Use same method as Flashing a Rom via MicroSD Card
--------------------------------------------------------------
--------------------------------------------------------------
5. JOB DONE. Well Done YOU DID IT!!
Useful Information
How to get into your Bootloader
1. Turn your phone off
2. Press and hold the VOLUME DOWN then Press and hold the POWER button. After about 3 seconds the tri-coloured screen should appear.
3. To exit Bootloader you need to remove your back cover and pull the battery out for a few seconds, then replace it and press the power button to reboot your phone.
How to perform a HardReset
Hard Resetting deletes ALL personal data and settings and restores your phone to factory default conditions as if you turned on the phone for the first time after purchasing.
1. With the device turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then briefly press the POWER button.
2. Continue pressing the VOLUME UP and VOLUME DOWN buttons until you see this message on the screen:
"This operation will delete all your personal data, and reset all settings to the manufacturer default settings. Press VolUp to restore manufacturer defaults, or press other keys to cancel."
3. Release the VOLUME UP and VOLUME DOWN buttons.
4. Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
You can also use Clear Storage to reset your device back to factory default settings.
1. On the Home screen, slide to the Settings tab and then tap Menu > All Settings.
2. On the System tab, tap Clear Storage.
3. Enter “1234” and then tap Yes.
Make sure you back up all your data such as Contacts, Appointments, messages etc or they will be gone forever.
*DISCLAIMER*
I take no responsibility for any fault or damage caused by any procedures within this guide. No warranties of any kind are given.

FAQ FOR FLASHING HTC HD2 (LEO)
Q. I can't get it working I need help.
A. If you need help you do need to provide as much detailed information as possible or we cant do anything.
What process are you trying to do? Installing HardSPL? Flashing Radio? Flashing Rom?
List each step you completed and where you got the error with the exact error code you was given if you got one.
Also exactly what operating system do you have on your pc?
If you do not provide this and just leave a message saying "I cant get it working, what do I do?" then I will know you havent looked at the FAQ before posting and you will be referred here.
--------------------------
Q. What is a Radio?
A: The Radio is the Firmware that works between the Operating System and the Cellular Hardware. It handles the Sound, Camera, GPS, Bluetooth, Wifi, Phone Calls, etc. The Radio must be compatable with the ROM's Operating System or you may experience problems with your sound and camera.
--------------------------
Q: What is the difference between SPL, SSPL and HardSPL?
A: SPL (secondary program loader) is part of the firmware that allows your phone to flash Roms, Radios, Splash Screens. Carrier locked so you can only use it to flash Roms from your own carrier.
SSPL (soft secondary program loader) is a temporary way to allow your phone to flash custom roms only (not radios). This doesnt give your phone the protection that HardSPL gives you.
HardSPL (as the name sugests) is installed permanently and allows you to flash anything to your phone. Its patched to protect you against bricking in the event of a bad flash and will let you get back into the bootloader to restore your system when a stock SPL wont. Always the best thing to have.
---------------------------
Q: What is the difference between ROM and RADIO?
A: The Rom is the operating system and included patches, tweaks and programs. The Radio is a seperate part of the firmware on the phone that handles all communation related matters such as signal, gps, bluetooth, camera, wifi and sound. Newer Radios to include improvements or fixes in older version, or even just to compliment an existing Rom or network so a newer Radio isnt neccessarily better. Radios also need to be matched to the correct Rom so you cant just put any Radio and Rom together.
---------------------------
Q: How do Stock ROMS differ from Cooked ROMS?
A: Stock Roms usually have extra 'bloatware' added which take up extra space on the phone. Custom Roms are stripped down to provide more space and most are tweaked to provide a faster more stable Operating System. Every chef is different so you have to look around the forums to see which Rom is best for your needs.
---------------------------
Q: What happens if I flash a Stock Rom via microSD Card?
A: Flashing a stock rom via microsd card will overwrite your rom, radio, splashscreen and SPL with the ones included on the stock rom. With previous devices I believe the HardSPL couldnt be overwritten this way but as bepe developed this version it must have been done differently. Stock Roms can safely be flashed via activesync and this method will flash the Rom, Radio and SPlashscreen but will not overwrite the HardSPL with a Stock SPL.
---------------------------
Q: Can I download official roms from the HTC Website?
A: Use the following serial number on the respective HTC site (thanks to mooooooa):
World Wide English (WWE) - Serial: HT9AZNW00968
South East Asia (Asian WWE) - Serial:HT01XNW03437
Denmark: (DAN) - Serial: HT9B6NW00167
Norway: (NOR) - Serial: HT9C7NW01234
France: (FRA) - Serial: HT9BLNW00122
Spain: (SPA) - Serial: HT9BDNW00592
Italy: (ITA) - Serial: HT9BCNW00722
Greek: (ELL) - Serial: HT9BMNW00059
Germany: (GER) - Serial: HT9B9NW00374
Netherlands: (NLD) - Serial: HT9AVNW01232
Russian: (RUS) - Serial: HT9BCNW00012
Turkey: (TUR) - Serial: HT9CMNW05766
East Europe: (WWE_EastEurope) - Serial: HT9B3NW02204
---------------------------

Hi Guys. I posted the text below a few days ago in the general section/questions thread but it seams the thread is not so popular .
I just got my hands on the pre-production LEO device (demo device I guess) and I have a couple of questions (this is my first WiMo phone, I have experience with Android and Symbian devices).
Pre-production devices seem to be "unlocked". Besides being SIM unlocked it seems to be SuperCID-ed as well. The latter obviously allows me to flash stock ROMs regardless of the county signature, right?
Now how about cooked ROMs? I persume I would need HardSPL as any other production device? Or does SuperCID have anything to do with the HardSPL?
or
Having the SuperCID-ed device I don't need the GoldCard?
I have tried searching the forum but I believe that my lack of WiMo terminology is slowing me down.
Thanks for any input in advance.

Hi I was hoping you could answer a few of my queries on flashing ect
1. SSPL seems like a better path to go down as it stops any warranty voiding, which means I can still get my phone repaired in the future - good . However how come most people always wait for HSPL? Im guessing its because HSPL only has to be ran once or something, so everytime you want a new rom from then on, theres no need to flash so no risk of bricking? Whats the pro's and con's of using HSPL or SSPL ? ( I personally was more keen on SSPL as my warranty isnt affected )
2. How come some rom chefs say that their roms cant be used with SSPL and you have to wait for HSPL ???
3. What are the possible errors/outcomes when something goes wrong when flashing with SSPL? how does a phone become bricked and are there any ways to recover it?
4. Whats with goldcard? is that only when someone needs to flash official roms if there particular leo is branded to a particular GSM? Mine is an unbranded, unlocked model so will I never have to worry about goldcard?
5. If my device does become bricked and there are no ways to unbrick it, what can I do to get a repair ect? someone suggested bunging it in a microwave for 10 seconds and then sending it off under my warraty claiming that I turned the phone off one day, and the next it wouldnt turn on (seems quite a clever idea, but a little extreme)
6. Can someone explain to me all about the radio? it seems to be a key part in flashing. What is it exactly, Im guessing its more complex than the fm radio lol, but I dont understand what it does to the phone, and I see only certain radio versions and compatible with certain rom versions. Also I see that flashing wih SSPL means you can only change OS's and splash screens, so will that create certain problems if you want change the radio version?
7. Im planning on flashing to THIS rom, for speed and performance while keeping some eye candy (Also I want to try windows mobile 6.5.3) is this a good choice?
Thanks all my questions for now, I would be SO appreciative if you guys could help me out as flashing is quite a scary concept for a £500 device

I hope someone will help me

GregorVucajnk said:
Hi Guys. I posted the text below a few days ago in the general section/questions thread but it seams the thread is not so popular .
I just got my hands on the pre-production LEO device (demo device I guess) and I have a couple of questions (this is my first WiMo phone, I have experience with Android and Symbian devices).
Pre-production devices seem to be "unlocked". Besides being SIM unlocked it seems to be SuperCID-ed as well. The latter obviously allows me to flash stock ROMs regardless of the county signature, right?
Now how about cooked ROMs? I persume I would need HardSPL as any other production device? Or does SuperCID have anything to do with the HardSPL?
or
Having the SuperCID-ed device I don't need the GoldCard?
I have tried searching the forum but I believe that my lack of WiMo terminology is slowing me down.
Thanks for any input in advance.
Click to expand...
Click to collapse
If your phone has been CID Unlocked (SuperCID) then you will be able to flash Stock Roms from other carriers but I think you will still need to use SSPL to flash Cooked Roms.
Hope that helps.

[★] said:
Hi I was hoping you could answer a few of my queries on flashing ect
1. SSPL seems like a better path to go down as it stops any warranty voiding, which means I can still get my phone repaired in the future - good . However how come most people always wait for HSPL? Im guessing its because HSPL only has to be ran once or something, so everytime you want a new rom from then on, theres no need to flash so no risk of bricking? Whats the pro's and con's of using HSPL or SSPL ? ( I personally was more keen on SSPL as my warranty isnt affected )
2. How come some rom chefs say that their roms cant be used with SSPL and you have to wait for HSPL ???
3. What are the possible errors/outcomes when something goes wrong when flashing with SSPL? how does a phone become bricked and are there any ways to recover it?
4. Whats with goldcard? is that only when someone needs to flash official roms if there particular leo is branded to a particular GSM? Mine is an unbranded, unlocked model so will I never have to worry about goldcard?
5. If my device does become bricked and there are no ways to unbrick it, what can I do to get a repair ect? someone suggested bunging it in a microwave for 10 seconds and then sending it off under my warraty claiming that I turned the phone off one day, and the next it wouldnt turn on (seems quite a clever idea, but a little extreme)
6. Can someone explain to me all about the radio? it seems to be a key part in flashing. What is it exactly, Im guessing its more complex than the fm radio lol, but I dont understand what it does to the phone, and I see only certain radio versions and compatible with certain rom versions. Also I see that flashing wih SSPL means you can only change OS's and splash screens, so will that create certain problems if you want change the radio version?
7. Im planning on flashing to THIS rom, for speed and performance while keeping some eye candy (Also I want to try windows mobile 6.5.3) is this a good choice?
Thanks all my questions for now, I would be SO appreciative if you guys could help me out as flashing is quite a scary concept for a £500 device
Click to expand...
Click to collapse
1. HardSPL is always the best way to go if available as once you have it on your phone theres minimal chance of bricking than flashing without it as you will always be able to get back into the bootloader to flash a stock rom if anything goes wrong. Even if you put HardSPL on your phone you can always flash back a stock SPL in the event you need to return it for warantee purposes.
2. I would guess that those Roms include maybe a Splash Screen or Radio which cant be flashed using SSPL.
3. Theres always a chance that something can go wrong in whatever you do. HardSPL gives you the ability to get back into the bootloader and flash a stock rom if you need to recover your device.
4. GoldCard is for flashing Stock Roms from other carriers. If your phone is unlocked then that means it is sim unlocked and not carrier unlocked (SuperCID) therefore you would still need to use goldcard if you wanted to flash a Rom that isnt directly from your carrier.
5. If your phone does become bricked and you dont have HardSPL to recover it then there are many ways you can try to get a new one under warantee. My favourite is pouring sulphuric acid over it and saying aliens broke into your house and tried mating with it but you can go with your own idea if you want to lol.
6. The Radio really isnt a radio haha. Its a seperate firmware that handles all the communication related parts of the phone. This includes the signal, bluetooth, wifi, sound, camera and gps. Until HardSPL is released the only way to change the Radio is to flash a stock rom which always includes a radio via goldcard method.
7. Thats the cooked Rom I flashed on my phone yesterday and its a very fast and stable Rom with no bugs that I can see. The download exe file includes the SSPL so unless you want to change the radio first its just a case of synching and flashing.
Hope these answers helped and good luck with your flash. The first one is always the hardest but do everything by the book and you shouldnt have any problems

Thanks for all the help, Im glad I didnt flash with SSPL just yet, I think I will wait for HSPL as it seems that I can still get my warranty back with it (but I just thought, what if you had to send it in for it not turning on or something, and they found a way to get it running, they would then see the spl was changed as I would not have had the chance to change it back)
mskip said:
1.
4. GoldCard is for flashing Stock Roms from other carriers. If your phone is unlocked then that means it is sim unlocked and not carrier unlocked (SuperCID) therefore you would still need to use goldcard if you wanted to flash a Rom that isnt directly from your carrier.
Click to expand...
Click to collapse
that isnt directly from your carrier? what do you mean, mines totally unbranded and sim free ect, so It doesnt come from a carrier, meaning I dont need goldcard right?
(Heres another question while your around, I went to send a massive text to all my contacts, ( I changed it in the registry so I could have more than 10 recipetents so thats not the problem) wishing them a happy new year, and It appears that it is not working, even after applying the hotfix some messages are in the outbox and some in the sent items folder. Whats with that?
Thanks so much for answering, especially this early in the year/morning (haha) happy new year to you sir!

[★] said:
Thanks for all the help, Im glad I didnt flash with SSPL just yet, I think I will wait for HSPL as it seems that I can still get my warranty back with it (but I just thought, what if you had to send it in for it not turning on or something, and they found a way to get it running, they would then see the spl was changed as I would not have had the chance to change it back)
that isnt directly from your carrier? what do you mean, mines totally unbranded and sim free ect, so It doesnt come from a carrier, meaning I dont need goldcard right?
(Heres another question while your around, I went to send a massive text to all my contacts, ( I changed it in the registry so I could have more than 10 recipetents so thats not the problem) wishing them a happy new year, and It appears that it is not working, even after applying the hotfix some messages are in the outbox and some in the sent items folder. Whats with that?
Thanks so much for answering, especially this early in the year/morning (haha) happy new year to you sir!
Click to expand...
Click to collapse
If it was sim free then you might be ok flashing any stock rom but I cant garentee it. It will soon tell you if you cant so give it a go.
Might just be overloaded as there are quite a few people texting at this time and I havent been able to send a text on my phone for the last hour lol. Thats why I always send mine out early to beat the queue
Happy new year to you too I hope you have a great one

So many thanks
So many thanks.Happy new year....

mskip said:
If it was sim free then you might be ok flashing any stock rom but I cant garentee it. It will soon tell you if you cant so give it a go.
Might just be overloaded as there are quite a few people texting at this time and I havent been able to send a text on my phone for the last hour lol. Thats why I always send mine out early to beat the queue
Happy new year to you too I hope you have a great one
Click to expand...
Click to collapse
ok maybe thats it but whatever, I might try and apply some fixes for the sms ive seen around here. Hey when do you think the HSPL will be out, Im itching to flash my device

Official ROM upgrade - error 260
I have downloaded the official 1.48 upgrade exe from HTC. I have a choice of computers, win 7 64 bit or win xp 32 bit on which to do the update. I have tried both following the instructions within the package and both get to the verification stage and stop with error 260 - no connection. Can anyone tell me precisely what to do to get around this?
My HTC is a purchased unlocked device and I can explore the 16 GB card via Explorer on either PC

dixie dean said:
I have downloaded the official 1.48 upgrade exe from HTC. I have a choice of computers, win 7 64 bit or win xp 32 bit on which to do the update. I have tried both following the instructions within the package and both get to the verification stage and stop with error 260 - no connection. Can anyone tell me precisely what to do to get around this?
My HTC is a purchased unlocked device and I can explore the 16 GB card via Explorer on either PC
Click to expand...
Click to collapse
I would recommend using the windows xp system to flash as its more stable.
What method did you use to flash the Rom? You need to do it via GoldCard method described just follow the link in the first post and follow all the instructions to the letter.

mikashakira said:
So many thanks.Happy new year....
Click to expand...
Click to collapse
Happy new year to you too and the best for 2010

MSkip
I was following the instructions given in the ROM Upgrade software downloaded from the HTC site. It undertakes a verification of your phone software, but for some reason keeps saying it cannot connect with it. I had it connected via a USB cable. Maybe I need to speak with HTC on Monday.
I thought it might be Kaspersky stopping it, but switching that off didn't fix it. Perhaps I haven't got the computer sync'd correctly with the phone. Its not very obvious.

dixie dean said:
MSkip
I was following the instructions given in the ROM Upgrade software downloaded from the HTC site. It undertakes a verification of your phone software, but for some reason keeps saying it cannot connect with it. I had it connected via a USB cable. Maybe I need to speak with HTC on Monday.
I thought it might be Kaspersky stopping it, but switching that off didn't fix it. Perhaps I haven't got the computer sync'd correctly with the phone. Its not very obvious.
Click to expand...
Click to collapse
Even if you have an unlocked phone you may still have to use the goldcard method to flash a stock rom.

SOLVED
Simply needed to instal WMDC.

dixie dean said:
SOLVED
Simply needed to instal WMDC.
Click to expand...
Click to collapse
yh that would help lol

Has anyone got any ideas on when a hspl is coming out?

[★] said:
Has anyone got any ideas on when a hspl is coming out?
Click to expand...
Click to collapse
No set date you will just have to be patient like the rest of us

Help!! Uninstall HARDSPL goes wrong.

Hello!
Like the title says: HARDSPL goes wrong.
I need to uninstall hardspl so i can use my warranty.
I have follow the tutorial in this thread how to uninstall it http://forum.xda-developers.com/showthread.php?t=611433
When the flash is compleated and its time for reboot i got this message http://www.youtube.com/watch?v=hWWpBbQTPb8
If i take out the memorycard and reboot i got this message http://www.youtube.com/watch?v=O4S-Rcqwlsc
If i try to reflash i getting the same message as the firs plus it says "upgrade ROM code error please try agen"
Can some one please help me out with this?
And yes i have done a hard reset.
And yes i have try to boot via usb to reflash.
If its to any help i used a ROM from this thread http://forum.xda-developers.com/showthread.php?t=577717 tha one called "LEO2.07"

I think you have to find official ROM which was installed on you HD2 before you changed HARDSPL and installed cooked ROM. You'll find all official ROM's in Leo Official ROMs thread. When you find the right one install it from your SD card. Hope this helps

mitja12 said:
I think you have to find official ROM which was installed on you HD2 before you changed HARDSPL and installed cooked ROM. You'll find all official ROM's in Leo Official ROMs thread. When you find the right one install it from your SD card. Hope this helps
Click to expand...
Click to collapse
Like I said. I have used a rom from official rom thread=) I also tryed the rom from htc.com with same resoult.
Can I uninstall a bad flash or something and start from the beginning ? Cuz now im stockt in my situation.

Like I said you have to find the "right" one. It's not just any official ROM. I my case I had to install some really old ROM. Unfortunately I don't know how to find the right one, just use the trial and error method.

mitja12 said:
Like I said you have to find the "right" one. It's not just any official ROM. I my case I had to install some really old ROM. Unfortunately I don't know how to find the right one, just use the trial and error method.
Click to expand...
Click to collapse
Okej! Sorry for missunderstanding. So the only way out is to try everyone ?
I was lucky to get the first released hd2 in my city, so i bett its a old one =)
Does it have to be the same language release to ?

In official ROMs thread is link to Shared folder for shipped Leo ROMs. In there are very well organised ROMs by country and carrier, you should find it quick enough. Just start with 1.43 and 1.48 and only those which matches your country and/or carrier.

or just to HTCs website and get it from there (assuming its not a vendor locked device)

mitja12 said:
In official ROMs thread is link to Shared folder for shipped Leo ROMs. In there are very well organised ROMs by country and carrier, you should find it quick enough. Just start with 1.43 and 1.48 and only those which matches your country and/or carrier.
Click to expand...
Click to collapse
I have trayd every rom that compatibility with my region "SVE" and its not working. I still get the message "upgrade rom code error please try agen". In the 1.43 i cant find my region, does that meens that is it impossible that i could have been that release of rom ?
Does sombody knows if there any way to cheack the stock ROM from a serialnumber or somthning like that?

lovenvik said:
I have trayd every rom that compatibility with my region "SVE" and its not working. I still get the message "upgrade rom code error please try agen". In the 1.43 i cant find my region, does that meens that is it impossible that i could have been that release of rom ?
Does sombody knows if there any way to cheack the stock ROM from a serialnumber or somthning like that?
Click to expand...
Click to collapse
Thinks getting better!
I find a new SD card, so i use this insted of the stock SD card.
No a white screen with a blue "Loading..." text appers.
BUT. its always a BUT. In this screen the phone freeze.

lovenvik said:
Thinks getting better!
I find a new SD card, so i use this insted of the stock SD card.
No a white screen with a blue "Loading..." text appers.
BUT. its always a BUT. In this screen the phone freeze.
Click to expand...
Click to collapse
does it freeze on the HTC splash screen?

djchubbs said:
does it freeze on the HTC splash screen?
Click to expand...
Click to collapse
Dont realy know what that its. But I press vol down and start bottom. Then the tri-colored screen shows up "bootloader" for about 1 second. Then i got this screen http://img405.imageshack.us/i/20090607028.jpg/
I have let it load for about 20min, then i gave up.

I'm afraid to say this, but you have SPL 2.07, which means you are on 'official SPL' and can only flash TMOS Official ROM (since the only SPL 2.07 is tied to US ROM)
I think the only way is to use goldcard, to flash your country's official ROM via sdcard (although I'm not sure if that will work, because I read some folks have problem with that)

Its seems i also have a problem flashing a stock rom for warranty reasons.
I did the following steps:
1. Get an official stock rom. (in my case it would me a NLD ROm 1.48)
2. Put it on storage card en change to LEOIMG.nbh
3. Turn of phone, press volume down en power up unntil tri color screen apears.
4. Follow steps on sreen.
But. I dont get step 4. On step it says for 1 sec ''loading''. After that, it goes back to the trii colour HARDSPL screen.
Does anyone know what im doing wrong?
I tried two different SD cards. A 2 gb version and a 4 gb version (both from Scandisk formatted as FAT32)
Is there a way/possible to flash a stock rom using activesync?

zenkinz said:
I'm afraid to say this, but you have SPL 2.07, which means you are on 'official SPL' and can only flash TMOS Official ROM (since the only SPL 2.07 is tied to US ROM)
I think the only way is to use goldcard, to flash your country's official ROM via sdcard (although I'm not sure if that will work, because I read some folks have problem with that)
Click to expand...
Click to collapse
Okej :O. Im not 100% sure what you meen, but is my warranty valid then?
Im gona send my hd2 in to htc cuz my display is broke. So i perhaps get a new phone. So the only thing im intrested in is to get my warranty valid.

lovenvik said:
Okej :O. Im not 100% sure what you meen, but is my warranty valid then?
Im gona send my hd2 in to htc cuz my display is broke. So i perhaps get a new phone. So the only thing im intrested in is to get my warranty valid.
Click to expand...
Click to collapse
hehe thats the same reason i want to sent my phone back.. its probably cost 213,- euro for me

You flashed it using the SD card method?
People with the same problem in this thread:
http://forum.xda-developers.com/showthread.php?t=630843
In post #64 fards helped XMOO get the device working again, only with SPL 2.07... maybe the rest of the thread provides more info or solutions. I didn't read any further.

lovenvik said:
Hello!
Like the title says: HARDSPL goes wrong.
I need to uninstall hardspl so i can use my warranty.
I have follow the tutorial in this thread how to uninstall it http://forum.xda-developers.com/showthread.php?t=611433
When the flash is compleated and its time for reboot i got this message http://www.youtube.com/watch?v=hWWpBbQTPb8
If i take out the memorycard and reboot i got this message http://www.youtube.com/watch?v=O4S-Rcqwlsc
If i try to reflash i getting the same message as the firs plus it says "upgrade ROM code error please try agen"
Can some one please help me out with this?
And yes i have done a hard reset.
And yes i have try to boot via usb to reflash.
If its to any help i used a ROM from this thread http://forum.xda-developers.com/showthread.php?t=577717 tha one called "LEO2.07"
Click to expand...
Click to collapse
why dont you try out from this thread ,it has videos to how uninstall hspl
http://forum.xda-developers.com/showthread.php?t=621930

lovenvik said:
Okej :O. Im not 100% sure what you meen, but is my warranty valid then?
Im gona send my hd2 in to htc cuz my display is broke. So i perhaps get a new phone. So the only thing im intrested in is to get my warranty valid.
Click to expand...
Click to collapse
No, your warranty is invalid as you're using an SPL/ROM not for your region - hence why you shouldn't flash a ROM from the SD card as this is the issue you have. You're now stuck with a broken HD2 until HSPL can be used on SPL 2.x

EddyOS said:
No, your warranty is invalid as you're using an SPL/ROM not for your region - hence why you shouldn't flash a ROM from the SD card as this is the issue you have. You're now stuck with a broken HD2 until HSPL can be used on SPL 2.x
Click to expand...
Click to collapse
Okej. Thats not good Hope some one release a HSPL 2.xx then =) But now i can't even use my phone anymore.

(just to double check)when you boot to bootloader, what does it say next to spl?
if it says spl 2.x then the above posts are correct, and you are stuck with spl2 until hspl2 is released.
You CAN get your phone working again, even with spl 2.
You need a goldcard, and you can then flash the 2.x official rom which will at least get your phone working. Once it is working, you can then flash custom roms using sspl BUT ONLY roms based on the 2.x official rom, and you won't be able to change radios using sspl. The only way you can change your radio is flashing a 2.x official rom with the goldcard.

New ROM for T-Mobile (UK) help needed

Hello.
This is my first post, so please be kind to me!
I've spent the past few weeks trying to get my head around what to do in order to flash my HD2 which is on the t_mobile network
The original rom 1.43 i think is driving me crazy and I now dont care if I change the rom and it invalidates the warenty!
In order to HSPL I need to SPL first, but will my device allow this?
I've read through so many threads that I am completely confused and dont know which way to turn, never mind which thread to re-read.
Can someone point me to the sspl, HSPL to upgrade to 1.66
Thanks
Glyn
oh its the 512 version

you are over confusing yourself.
download hspl 2
instal it - choose whichever hspl you like (may as well go for 2.08.hspl)
flash whatever rom you like from usb. (don't forget to flash a compatible radio either before or straight after.)

Thanks for your reply......
so downloan the HSPL from here?
'forum.xda-developers.com/showthread.php?t=609477'
and as I run the program I'll get the option of which version to install?
What should I look for to make sure that the radio is compatible with the rom?
Thanks again and sorry for my ignorance
Glyn

best thing you can do is to read a lot. No need to do enerything in one mad dash.
get HSPL2 from HERE - end of the first post (but read the post, dont just skip to download, )
run it as administrator (right click, run as administrator)
for best results use a usb port on the back of your PC (i.e one directly on teh motherboard, not an external usb slot) it will ask what version you want to install. just go for 2.08.hspl (not 2.08.0000) and let it do its thing. the authors say you should match the version to the rom (so 1.43.hspl for roms that are 1.43 or 1.48, 1.66.HSPL for 1.6 based roms, etc, but it isn't critical, most will run on any HSPL, so dont go changing every time you flash a new rom, no need. If it doesnt work then change it.)
As for radio tips, a radio with .51. in the number, (eg 2.09.51.03) will NOT work with any rom that has the 576meg ram, enabled.
If you flash a rom and all you get when you restart is a grey screen, chances are the radio doesnt match. Boot to bootloader and flash the radio.
But most of all, read stuff.

What about shipped rom's that are .exe files? Do they include radios with it? Also, is there a post you can point me to that has a list of compatible radios with different rom's?

that's where reading comes in. the whole process has so many variants that there is no simple "a b c" that covers everything.
yes the exe includes radio (and also spl if you use sd card to flash -stay away from sd card, use usb and if anything goes wrong you just boot to bootloader and re flash)
the chefs give you all the infoyou need in the first couple of posts. the sticky threads in the rom development section will tell you how to do everything, and any problem you encounter has beenwritten about already. so read,search and read.

I suggest you flash Stock WWE 1.66 ROM first so you can have a feel of how much improvement
has been done from 1.43
you can download it in HTC website.

Thanks for your help so far..
I would like to go for the 1.66 official ROM first, so I'll find that on here first and find the exe file so I dont have to mess about with compatible radio's.
Just before I HSPL it, I would like a copy of the original 1.43 T-Mobile ROM, so better get searching.
Thanks again
Glyn

the original 1.43 T-Mobile ROM is on HTCs website so get it from there as a backup

THANKYOU!!
Thankyou so much for your help and guidance.
Last night I decided to just do it - the phone was so poor I couldn't take it anymore.
3 hours from start of backing up, to installing HSPL2, to flashing with 1.66, anf then restoring data
I cant believe the transformation - I am so pleased I didnt throw it at a wall!!!
So a massive thanks to the members of this community

im in the same boat... got a stock uk hd2 on tmobile and wasn't to flash a new rom but the information is overwhelming and im scared I will flash a wrong rom and kill my phone :0)

Chivalryyyy said:
im in the same boat... got a stock uk hd2 on tmobile and wasn't to flash a new rom but the information is overwhelming and im scared I will flash a wrong rom and kill my phone :0)
Click to expand...
Click to collapse
theres nothing to it. the 'normal' hd2 which you do have, is about the safest phone to flash in the world today, with HSPL2. The 'radios killing phones' problem that started last week is specific to the t mobile US model only, , the one with 1 gig rom.
If you install HSPL on your phone, and then only flash over USB, the very worst that will happen (from a software point of view) is that the phone stops at a grey screen, and/or only boots into bootloader, so you boot into bootloader, you flash something else, and it's fixed.
The T Mo UK stock rom is available to download as backup, (as is o2 and voda for anyone looking) in the 'LEO official roms' thread in rom development, first post, first link, first folder (1.43)
At any time, you can flash that rom from sd card (look it up if you need to) and restore everything, spl, radio and rom, , to factory settings.
In all honesty, so long as you are careful, methodical, don't pull out USB cables halfway through, laptop battery dies, etc , then you are more likely to get bricked from some freak incident, like , umm, battery dieing, heh.
Fear not! be smart, be careful, try to understand what you are doing and why at each step, read up on what an spl is, and the job is , as they say, sorted.

RE: Please Help
rockthebus said:
Thankyou so much for your help and guidance.
Last night I decided to just do it - the phone was so poor I couldn't take it anymore.
3 hours from start of backing up, to installing HSPL2, to flashing with 1.66, anf then restoring data
I cant believe the transformation - I am so pleased I didnt throw it at a wall!!!
So a massive thanks to the members of this community
Click to expand...
Click to collapse
Hi Guys
Can you help me...
How do i back up the phone before adding HSPL?
is this neccesary and where do i get the stock rom copy from.
i got the phone this week and hate it in its present form... can't even watch youtube.
looking to update to avoid sending back
Regards
mkhonat

re:
samsamuel said:
theres nothing to it. the 'normal' hd2 which you do have, is about the safest phone to flash in the world today, with HSPL2. The 'radios killing phones' problem that started last week is specific to the t mobile US model only, , the one with 1 gig rom.
If you install HSPL on your phone, and then only flash over USB, the very worst that will happen (from a software point of view) is that the phone stops at a grey screen, and/or only boots into bootloader, so you boot into bootloader, you flash something else, and it's fixed.
The T Mo UK stock rom is available to download as backup, (as is o2 and voda for anyone looking) in the 'LEO official roms' thread in rom development, first post, first link, first folder (1.43)
At any time, you can flash that rom from sd card (look it up if you need to) and restore everything, spl, radio and rom, , to factory settings.
In all honesty, so long as you are careful, methodical, don't pull out USB cables halfway through, laptop battery dies, etc , then you are more likely to get bricked from some freak incident, like , umm, battery dieing, heh.
Fear not! be smart, be careful, try to understand what you are doing and why at each step, read up on what an spl is, and the job is , as they say, sorted.
Click to expand...
Click to collapse
Hi samsamuel,
Sorry to msg you like this.
i have purchased a T mobile HTC HD2 which came with the stock 1.43 ROM.
I want to put 1.66 on but don't know how.
I've read the forum and looked on youtube but confused.
Do you have an idiots guide?... i really am an idiot when it comes to stuff like this!
I have downloaded HSPL2 file.
I have downloaded the back up 1.43 Stock Rom
Do i need to download the 1.66 ROM now and how do i update?
please excuse my ignorance and i am happy to donate if you can help.
Kind regards
Mkhonat

RE:
Hi Samsamuel,
Thanks.. just one more thing.
Saw on youtube that i have to format my SC card
youtube.com/watch?v=nrmlqrfCvas[/url]
is this so and is this referring to the sd card in the HTC or my own sd card used to download the 1.66 onto?
regards
mkhonat
PS. why won't this forum allow me to send you a PM?.. i can't send any msg's at all.

[Q] Device bricked after attempt to flash official firmware

The firmware on it was 1.48.405.2, S/N HT9CSNW01982
Couldn't download the update from the HTC site with this serial, it said that the download is not suitable for this device.
Tried to flash using the exe and active sync, but at 1% would say "error [294] invalid vendor id"
Tried to install HARDSPL, but it was unable to connect to the device, though it was connected to active sync, and HSPL did manage to bring out the bootloader.
So I used mtty without HARDSPL, which bricked it.
Now it doesn't boot, it just stops at the first screen with the green HTC on white background
I've tried hard factory reset, but it's no help
If I try to flash from SD with any stock ROM, it displays "00028002 not allow"
It boots the bootloader, as follows:
PB81100 HX-BC
SPL-1.42.0000 XE
MicroP(Led) 0x05
MicroP(touch) 0x30
I don't know if it was branded and then unlocked, the guy I've bought it from said he got it retail and it was never locked. I can't be shure about that, all I know is that it's bought from UK
Can anything be done or should I start using it as a paperweight?

mtty has removed your operating system so of course it won't boot.
enter bootloader, flash a rom, fixed.

I tried to flash from SD with stock ROM, but it displays "00028002 not allow"
I used 1.48.405.2 from the HTC site (which was supposed to be it's original version), but nothing
Any ideas?

sounds like you are using teh wrong stock rom.
You cant just flash any stock rom, it must be the correct rom for your phone. So if your phone was originaly vodaphone germany, you must use a vodaphone germany rom, else it wont flash.
If you use hspl2, then you can flash anything you like.
Example
get the 1.66 wwe rom from official roms thread.
boot phone into bootloader.
connect usb.
when 'serial' changes to 'usb' right click hspl.exe and choose run as administrator
when it runs choose 1.66.hspl
when it completes, return to bootloader again
connect usb
when 'serial' changes to 'usb' run the 1.66 wwe.exe file.

I know what happened... I followed the MTTY thread and changed the default win7 active sync drivers with the ones from the thread. So that's why hspl would not connect...
Can I use 2.08.HSPL from HSPL3 to flash the latest 3.14.405.2 stock update from HTC?
And another thing... how can I find what's the original firmware for my phone? Because I know it was bought from the UK and the firmware on it was 1.48.405.2

i think the 1st port of call for you is to get the correct update updat for your phone , if there is one. o2 and other providers have not yet had updates (3.14) for their branded phones . go to htc uk , put your s/number in and see if they have an update for you , if you get the "this update is not suitable for your phone" or similar , message , this means that you have a branded phone that the generic update is not suitable for

Yes it does say that, but my problem is that I don't know from what provider it is, since I bought it second hand. Is there any way to find this out?

Slothb said:
The firmware on it was 1.48.405.2, S/N HT9CSNW01982
Couldn't download the update from the HTC site with this serial, it said that the download is not suitable for this device.
Click to expand...
Click to collapse
?? That should have been a pretty good indicator that it wasnt going to work.......
I think some reading is in order before you attempt this again.............

I did read, that's why I tried to use HARDSPL
I managed in the end to install 2.08.HSPL, but if I try to flash any stock ROM, it stops after (presumedly) it flashes the bootloader and displays "not allow" again
I am able though to flash custom roms.
Is there any way to find what was the original (branded?) firmware, so I can track it down? Or maybe to strip the bootloader off a stock ROM, so I can use it with HSPL?

only "method" i know is to take your s/n and try to download offical roms on htc's site.
if you can download a vodafone one, its vdf branded, if you can download a o2 one, its o2 branded and so on..
DN41

Slothb said:
Yes it does say that, but my problem is that I don't know from what provider it is, since I bought it second hand. Is there any way to find this out?
Click to expand...
Click to collapse
Call HTC support and tell them you want to upgrade your phone, but bought it unbranded and don't know which country it belongs to. That's what I did and they told me without any issues.
Once you have it, download and run.
Also, try some of the more esoteric regions. My phone was from Czech and although the website is not in English, the ROM upgrades were, so I was able to flash stock w/o issues

my phone is vodafone (i removed the simlock) and the HTC website told me no update for you.
so i used a custom rom.

Slothb said:
I did read, that's why I tried to use HARDSPL
I managed in the end to install 2.08.HSPL, but if I try to flash any stock ROM, it stops after (presumedly) it flashes the bootloader and displays "not allow" again
I am able though to flash custom roms.
Is there any way to find what was the original (branded?) firmware, so I can track it down? Or maybe to strip the bootloader off a stock ROM, so I can use it with HSPL?
Click to expand...
Click to collapse
are you sure you got it unlocked? Did you see the "we unlocked it" screen? Also, flashing a stock ROM from the sd card locks the hspl again so that may be your problem. Don't flash a stock ROM from your sd card unless you want it locked.

Indeed, I tried to flash it from the SD card, because I had no OS to boot to. So I flashed a custom ROM from th SD, then flashed a stock ROM via active sync and now the stock ROM runs happily on HSPL
Big thanks to all who answered my post and helped me to revive my phone!