Database Users

Flashing HD2 with WWE ROM

Hello,
I want to flash my device with 1.66.707.1 rom. I can't download it via HTC official page.
Now I have few questions. According to that I couldn't download it from HTC official page in my country because I've got inappropriate S/N. May I install it on my radio if I supply good (fake) S/N to official HTC page?
I even didn't tray to do this because I'm afraid I can turn my HD2 a into brick.
I don't care about language. I think that after flashing ROM I can download a proper language pack.
Greats.

invalid serial means your phone is vendor locked. (eg t mobile, vodafone or whatever)
even if you download using a different serial the upgrade will fail saying "vendor id mismatch" or something similar.
in theory you need to wait for your vendor to release the update, however in reality installing hspl will allow you to instal the update without getting the error.
go read the hspl threads.

Easy to sey .
It's my first Windows Mobile based phone. I've never installed rom, and yet a cooked one.
I've have some bugs about which I've read on this forum. Those are:
* lack of virtual keyboard while creating a new text message (or any app which need it)
* error while starting digital camera.
All of that disappear after soft reset. That's why I want to install the newest rom.
To not start a new thread is there any way to find out if the rom which I downloaded from HTC suits to my phone? S/N is correct. If I start RUU it will start flashing my device, yes?
Another question. Is it true that every HTC Leo has 576MB RAM but it is locked down?

read this then, it has all the info you need on flashing your phone...
http://forum.xda-developers.com/showthread.php?t=609477
once HSPL is installed you can download an official WWE ROM from this thread and run it as if it were an official ROM for your phone...
http://forum.xda-developers.com/showthread.php?t=623283

y0yster said:
Easy to sey .
It's my first Windows Mobile based phone. I've never installed rom, and yet a cooked one.
I've have some bugs about which I've read on this forum. Those are:
* lack of virtual keyboard while creating a new text message (or any app which need it)
* error while starting digital camera.
All of that disappear after soft reset. That's why I want to install the newest rom.
To not start a new thread is there any way to find out if the rom which I downloaded from HTC suits to my phone? S/N is correct. If I start RUU it will start flashing my device, yes?
Another question. Is it true that every HTC Leo has 576MB RAM but it is locked down?
Click to expand...
Click to collapse
As EddyOS stated, go read my flashing guide THOROUGHLY!!
1. Install HardSPL on your device (best done using WindowsXP or Windows7 32bit).
2. Download the Rom you require from the download site provided and flash using the instructions provided in my guide.
3. Enjoy your new phone
Once you have HardSPL on your phone it will be protected from bad flashes and you will be able to flash stock or custom roms or radios as and when you require. HardSPL is definitely reccommended as it has probably saved hundreds of phone from being turned into paperweights when flashing a bad rom or flashing incorrectly.
If you want to try a custom rom then I would definitely recommend the one in my signature but its totally upto you what you decide to put on your device.
With regards to the 576MB Ram it does seem that its actually accessible but only using the newer 2.02 Roms with specific Radios. This has been tested and verified. It wont be accessible on a 1.66 stock rom though.

Hello,
I tried to flash my device witch rom which is on htc official page.
When I was flashing something went wrong and on 24% upgrade have broken. I did what was write on the program but all the time I have 4 strips red, green, blue and white. Before I turn on the device I have sign of warning.
What I have to do now? Is my phone dead now?
Please answer as soon as you can.

y0yster said:
Hello,
I tried to flash my device witch rom which is on htc official page.
When I was flashing something went wrong and on 24% upgrade have broken. I did what was write on the program but all the time I have 4 strips red, green, blue and white. Before I turn on the device I have sign of warning.
What I have to do now? Is my phone dead now?
Please answer as soon as you can.
Click to expand...
Click to collapse
- What ROM were you trying to flash and what ROM version (and language) do you have on your device?
- Is your device Branded?
- Did you flash HSPL?
- Did you see a progress bar on screen when flashing, or just the colored bars?
- When you get to the tricolor-screen (bootloader) and you connect to your PC, does it say USB after a few seconds, or does it say Serial?
- What went wrong at 24%? Did you unplug the phone, did your system crash, or were you just being inpatient?
If you answer the above questions, someone may be able to help you. Also, start by reading the stickies.

Rom was 1.48.479.1 and I wanted to replace it with 1.48.479.1 because some bugs were annoying me which I mentioned earlier.
Yes my device is branded but it doesn't have simlock.
No I didn't used HSPL because I downloaded rom from HTC using my own original S/N.
When I was flashing I saw brogress bar with HTC logo.
I have those tri-colour screen when I power on the device, but before that I have warning triangle. No it doesn't say Serial nor USB.
What went wrong. I swear I don't know. No, no, no I wasn't impatient. After it hanged on 24% I got error message from the program on PC with UPGRADE ERROR. I've tried to resume like the program said me. But without any effect. What I did was unplug; put aut battery; wait 3 seconds; put battery in; power on and plug in. I'm sure that I was doing everything right because I was following the program.

help
samsamuel said:
invalid serial means your phone is vendor locked. (eg t mobile, vodafone or whatever)
even if you download using a different serial the upgrade will fail saying "vendor id mismatch" or something similar.
in theory you need to wait for your vendor to release the update, however in reality installing hspl will allow you to instal the update without getting the error.
go read the hspl th
hi there i really need help
i have a htc hd2 uk on t-mobile tried to rom update and messed it up , things dont work , i would like to ind software to rom update even htc.com s/n not right message comes up . please help
Click to expand...
Click to collapse

If i have 1.48 and with my serial can`t download 1.66... it is recommended to install WWE 1.66 with serials posted here without HSPL? my device is also WWE and was only sim locked Vodafone. (non-branded)

If you have questions regarding rom or hardspl flashing please ask in the correct thread.

if,when you put your serial into htc website, it doesn't allow you to download, then you MUST use hspl to flash an unbranded rom.
@y0ystet. your phone is branded. sim lock its not connected to vendor lock.instal hspl and try again, same rom.
@lakhbeer, did you flash hspl first? more detail please, messed up? doesn't work?
@rayman your phone is vodafone locked.
I repeat, the htc website doesn't accept your serial, you are provider locked and that is not connected to sim lock/unlock.

I sent an e-mail to HTC about that. They said I can send the phone to them.
I found sth out. If I hold the volume down and connect the usb cable I have a message on my screen. On screen which have three colours on green I have: "Upgrade Rom code error. Please try again" And on the white I have: "Serial".
Is there anything I can do about that?
But don't say me to flash witch the HSPL. I won't do that on two reasons:
I've never do that
If I send it to service I'll void my warranty.
What would you suggest to do?

I've solved the problem .

you going to let people know for future use?

How to fix ROM error on VODAFONE UK solution
I also have a HTC HD2 bought from Vodafone.
I flashed my mobile and installed Pandora 1.4 ROM...it was always freezing my Leo every time I looked at docs tab, so I decided to install shipped Leo ROM 1.66 and that is when things went wrong, same problem as you have now, so I downloaded h**p://w w w .4shared.com/file/205652004/1bf6c7ce/RUU_Leo_Vodafone_UK_1434051_Ra.html
aka the original ROM from Vodafone UK and it is working now....but now I am no sure if I wanna try more roms because next time I can be stuck with error screen forever.....

Cannot uninstall HSPL after installing 1.66 wwe rom

My hd2 bricks after i tried uninstalling hspl with the help of stock rru_signed.nbh file. it is not working now. just a traingle with ! this coming.
any help.. hd2 i have is a vodafone uk stock rom.

mon_money said:
My hd2 bricks after i tried uninstalling hspl with the help of stock rru_signed.nbh file. it is not working now. just a traingle with ! this coming.
any help.. hd2 i have is a vodafone uk stock rom.
Click to expand...
Click to collapse
You must use a vodafone stock ROM then - the 1.66 HTC ROM flashes the stock SPL
which does not fit your CID, therefore you get the triangle.

thx for replying.
I had stock rom 1.48 before and then i installed HSPL so that i can install Stock 1.66 wwe rom into my hd2. It was a successful action. Rom installed and worked correctly without any problem.
But problem arise when I tried to uninstall the HSPL to original spl. I renamed the 1.66 rom .nbh file to LEOIMG.nbh and converted the card format into fat32 also.
when i inserted the card into hd2 and turned it on whilst pressing down volume button. its started into boot loader program and den asked me to press power button to start the process.
And then it ended with an error.. 00028002 NOT ALLOW something like that. which is for Invalid vendor ID..
Please help..
how to return to original spl with the latest 1.66 wwe rom.
thx in advance..
tictac0566 said:
You must use a vodafone stock ROM then - the 1.66 HTC ROM flashes the stock SPL
which does not fit your CID, therefore you get the triangle.
Click to expand...
Click to collapse

don't think you can, HSPL has to stay on...could be wrong though...
why do you want to take it off?

mon_money said:
thx for replying.
I had stock rom 1.48 before and then i installed HSPL so that i can install Stock 1.66 wwe rom into my hd2. It was a successful action. Rom installed and worked correctly without any problem.
But problem arise when I tried to uninstall the HSPL to original spl. I renamed the 1.66 rom .nbh file to LEOIMG.nbh and converted the card format into fat32 also.
when i inserted the card into hd2 and turned it on whilst pressing down volume button. its started into boot loader program and den asked me to press power button to start the process.
And then it ended with an error.. 02800 something like that. which is for Invalid vendor ID..
Please help..
how to return to original spl with the latest 1.66 wwe rom.
thx in advance..
Click to expand...
Click to collapse
Actually, you did everything correctly... except that you should use the stock ROM for your device, which is vodafone branded, isn´t it?
BTW, did you check the SPL version already? Because it might be already back to stock SPL, but then, you won´t be able to flash an original HTC ROM.
Being back at stock SPL (with vodafone CID) and trying to flash/launch an official HTC ROM on the branded device results in what you write!

Hmm.. is there any harm if i don't remove HSPL??? as m still trying to make my HD2 working..
error coming is 00028002 NOT ALLOW
EddyOS said:
don't think you can, HSPL has to stay on...could be wrong though...
why do you want to take it off?
Click to expand...
Click to collapse

mon_money said:
Hmm.. is there any harm if i don't remove HSPL??? as m still trying to make my HD2 working..
error coming is 00028002 NOT ALLOW
Click to expand...
Click to collapse
Get the original 1.43 vodafone UK ROM from here, and repeat what you did.
Follow the first link, select 1.43, then obviously the vodafone ROM.
EDIT PS:
In case you want to keep the stock SPL, but upgrade to the 1.66 HTC ROM, you must do this using SSPL (search for this here in the forum).
As of today, there is no other way of getting the stock SPL back than flashing your original ROM.

BIG thank you .. it is working now with the stock 1.43 rom.. and yes u are right.. it was showing me again 1.42 spl after uninstalling the HSPL.
u saved my hd2.. thx once again for ur great help..
tictac0566 said:
Get the original 1.43 vodafone UK ROM from here, and repeat what you did.
Follow the first link, select 1.43, then obviously the vodafone ROM.
EDIT PS:
In case you want to keep the stock SPL, but upgrade to the 1.66 HTC ROM, you must do this using SSPL (search for this here in the forum).
As of today, there is no other way of getting the stock SPL back than flashing your original ROM.
Click to expand...
Click to collapse

tictac0566 said:
Get the original 1.43 vodafone UK ROM from here, and repeat what you did.
Follow the first link, select 1.43, then obviously the vodafone ROM.
EDIT PS:
In case you want to keep the stock SPL, but upgrade to the 1.66 HTC ROM, you must do this using SSPL (search for this here in the forum).
As of today, there is no other way of getting the stock SPL back than flashing your original ROM.
Click to expand...
Click to collapse
Hi
Thanks for the link, however the 1.43 ROM is corrupt, I have tried downloading several times. I try to extra the RUU_Signed.nbh with winrar but it fails, the 1.66 and 1.72 Vodafone ROMs extract fine.
Basically I am trying to restore a Vodafone HD2 to stock ROM+SPL, reason being the phone they sent on an insurance replacement is rubbish e.g. the touchscreen isn't responsive. I tried changing to a custom ROM also Vodafone 1.66 and 1.72 to see if the problem would be fixed but it didn't help.
Now I just need to send the phone back for another replacement.
Does anyone have an alternative link for this 1.43 ROM?

I am having a similar issue.
I am trying remove HSPL, I have copied the .nbh file over to the SD already formatted as FAT 32 - I'm using my original ROM.
(RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Shp )
Also tried with ( RUU_Leo_HTC_WWE_1.43.405.1_Radio_Signed_15.26.50.07U_2.04.50_22_2_Ship )
When I start with volume down pressed, I get a message saying " Upgrade ROM code error please try again " then the multi coloured screen with SPL-1.42.0000 XE.
Please help, I fear I have broken my phone ...

chrisukhd2 said:
(RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Shp )
Also tried with ( RUU_Leo_HTC_WWE_1.43.405.1_Radio_Signed_15.26.50.07U_2.04.50_22_2_Ship )
Click to expand...
Click to collapse
Then your phone is probably provider rom locked.
SPL-1.42.0000 XE.
Click to expand...
Click to collapse
HSPL is already removed, which is why the WWE roms don't work. You need to find your provider released rom, or (far easier) run hspl2, choose 1.42.hspl, flash either of teh roms you mentioned above by USB, run hspl2 again, choose 1.42.0000 and done.

samsamuel
Thanks for the reply.
I can't use HSPL2 as the phone doesn't sink to my PC as it's stuck on the tri colour screen. Unless there is a way of doing this from the memory card.
I'm pretty sure my stock ROM was 1.43, which I have downloaded but can't re flash?.
I guess I need to download a 1.42 O2 ROM from somewhere?

chrisukhd2 said:
samsamuel
Thanks for the reply.
I can't use HSPL2 as the phone doesn't sink to my PC as it's stuck on the tri colour screen. Unless there is a way of doing this from the memory card.
I'm pretty sure my stock ROM was 1.43, which I have downloaded but can't re flash?.
I guess I need to download a 1.42 O2 ROM from somewhere?
Click to expand...
Click to collapse
No need to sync to pc. In bootloader, connect usb cable - when USB shows on the screen then run HSPL2

ClydeB1 said:
No need to sync to pc. In bootloader, connect usb cable - when USB shows on the screen then run HSPL2
Click to expand...
Click to collapse
pre - and indeed - cisely

OK this is using the 1.48 ROM
Used HSPL2 and hacked to 1.42.hspl, pressed power to start update image, and the ROM loaded but then goes back to the tri colour screen again. So I ran flashed through USB 1.48 ROM and got " Invalid Vendor ID " ?
I tried HSPL2 again to hack to 1.42.0000 and then re-flash through USB and got " invalid vendor ID again "
I even tried with HSPL I had before and the same result.
Argghhhhhh
What can I be doing wrong here ?

Working now
I downloaded the latest O2 ROM 1.72.0 etc and it's working now.
Thanks again guys, you helped me a lot
Once more thing my phone now say's it has SPL-1.66 - I guess when unlocking using HSPL2, I now need to choose 1.66.000?

mon_money said:
My hd2 bricks after i tried uninstalling hspl with the help of stock rru_signed.nbh file. it is not working now. just a traingle with ! this coming.
any help.. hd2 i have is a vodafone uk stock rom.
Click to expand...
Click to collapse
1. download stock ROM
2. unpack/unzip and place ruu_signed.nbh and ROMUpdateUtility in sd card
3. make sure you have >50% battery life
4. with the device turned off, put sd card in
5. enter boot loader, device will automatically detect ROM file in sd card and
then will install this, it will install stock spl as well so hspl will be removed

chrisukhd2 said:
OK this is using the 1.48 ROM
Used HSPL2 and hacked to 1.42.hspl, pressed power to start update image, and the ROM loaded but then goes back to the tri colour screen again. So I ran flashed through USB 1.48 ROM and got " Invalid Vendor ID " ?
Click to expand...
Click to collapse
sounds like you tried to flash over sd card, which as any fule kno first thing it does is resets the spl, so hspl is no longer installed so the rest of the flash fails.
I tried HSPL2 again to hack to 1.42.0000 and then re-flash through USB and got " invalid vendor ID again "
Click to expand...
Click to collapse
because its .0000
I even tried with HSPL I had before and the same result.
Argghhhhhh
Click to expand...
Click to collapse
used sd card again eh?
1 - boot the phone to bootloader. (Three coloured screen)
2 - run hspl2, choose whatever spl you like SO LONG AS it ends HSPL.
3 - when the phone reboots, keep volume down pressed to re enter bootloader
4 - run your rom flash over USB
5 - phone should now boot normally.
6 - if you now want to remove hspl again, re run HSPL2 and choose the spl you want, ENDING IN .0000

samsamuel
Yes Doh - I was flashing from SD and then trying to flash through USB. It all makes sense now. I got around it though by using the new O2 ROM that's just been released so I didn't need to unlock to bring my phone back to life.
Anyway it's all working fine now with the stock 1.72 O2 ROM, just flashed with HSPL2 and re-installed the Energy ROM.
Thanks again for all the help.

ahh good.
Its a good idea if you flash fairly regularly to do your flashing from bootloader, that way you are visually aware of your spl at every step. just get used to holding vol down as it reboots and you can do the whole thing, hspl, rom, radio, without ever having to pull the battery. just keep booting to tri colour till its done.

HD2 not turning on after custom fROM flashing

Hi all,
I know how often these threads come up and I'm sorry to be posting one myself. I have used the search function to help me sort the problem out, but I just seem to be stuck.
Ok, so I had 1.48 official WWE ROM on my HD2 and thought of upgrading to a custom ROM unlocking the 576mb RAM.I used the following 'Lost in Asia Preloaded' ROM.
I did a HSPL before this and went on to install the ROM. The installation was unsuccessful and all I was getting was the white HTC screen from startup. Even after taking the battery out/red button reset, the problem was not fixed. I searched around a bit and did the following:
'you should get your stock rom, ONLY your stock rom, extract the file ruu_signed.nbh. copy that file to your sd card formatted to fat 32 rename the file to leoimg.nbh. phone off. hold volume down. tap power (keep volume held). phone should boot to three colors screen and start to flash.
this will ONLY work with original rom.'
This installation was unsuccessful as well and now the phone will not turn on and I'm getting an exclamation mark in a black screen.
Could anyone please help me out? Sorry for being a noob at this, I don't get the chance to keep myself updated about all the advancements in ROM development.
Thanks in advance for your help.

heh, seeing as you are quoting me I'll have a go at helping.
my first thought is that you didn't use the correct stock rom.
where is the phone from? did you buy it outright or on contract?
what country are you (was it bought) in?

Question 2 - can you get in to bootloader? (power off, making sure there is NOT a leoimg file on sd card, hold down volume, tap power, keeping down vol pressed till it starts to three coloured screen)
If you can get to that screen, look for the SPL bit, what does it say?
Hopefully something like 1.42.0000 or 1.42.HSPL?

Hey thanks for the quick reply. Yeah I did use your advice from a different thread.
Answer to the first question: I got this on contract from T Mobile UK in November.
Answer to the second question: I had a look again on the initial advice by you, saying that I should use the original ROM file. as stated before it was 1.48 and I was using 1.66 to fix the phone. Using the 1.48 image file has now brought the phone back to life and it now seems to be working fine. But I am stuck on 1.48.
About the SPL: Volume button held down and tapping the power button brings up a screen showing SPL-1.42.0000 XE
I wanted to upgrade to a more recent version of the ROM namely 1.66.707.1 with a more recent Radio version as well. Though flashing a recent custom ROM would be the answer. more ram would not hurt as well! Any help about how I might be able to go about this? a link to the right guide would be helpful as well.

Heh, glad its sorted. Heres a few pointers.
Your stock rom is the T Mo uk wwe 1.48 rom. Keep a copy of that handy just in case you ever break it again. That one will always (well, nearly always) take your phone back to stock if you do the sd card method with the leoimg file.
When you are flashing, you should idealy always use USB method, NOT sd card method - Reason? because flashing an official (eg 1.66) rom using sd card will not only overwrite your original rom, but also overwrite the phones SPL (including HSPL, thats how to uninstal HSPL for warranty purposes).
For flashing both official roms, or cooked roms, you should instal HSPL and then use USB method to flash the rom.(Same goes for flashing radios)
The only time you need to use sd card method is when you want to go back to factory default, and then you should only do so with that T Mo UK file.
If you flash a bad rom that wont boot, no problem, because HSPL will still be installed, because you used USB method, , , so just pick a different ROM and flash again from the pc, over USB, job done.
SD card flashing is risky unless you are absolutely sure what you are doing.

To move to 1.66 (or in fact any rom you like) do this
Instal HSPL
run the 1,66 installer from the PC (NOT SD CARD!)
wait for it to flash
Done.

Great thread guys!
Do we really install HSPL? because if the installed one is the official 1.48... the official 1.66 should be instalable by USB, right?. this is my case and I'm a little confused...
Qq

In my opinion it is best to install HSPL, and then instal the updated (or cooked) rom using USB, that way your SPL is protected by HSPL.
Put simply, you want to protect your SPL, and the best way to do that is to avoid flashing using sd card. With HSPL installed you CAN install any cooked rom, and you CAN install the official updates (1.66) with no effect to your SPL.
I should point out that if you do NOT have your original stock rom available you won't be able to uninstal HSPL in the event of needing to return the phone, but if you DO have it available, (or you dont mind the possible warranty void) then go for it.

quiquevich said:
Great thread guys!
Do we really install HSPL? because if the installed one is the official 1.48... the official 1.66 should be instalable by USB, right?. this is my case and I'm a little confused...
Qq
Click to expand...
Click to collapse
If your phone lets you instal 1.66 via usb without HSPL then go right ahead, using USB will not affect your SPL. If you are provider locked, and there is no provider 1.66 available (example o2 uk havent released a 1.66) then you can instal HSPL and then use the HTC 1.66.

[Q] Flashing phone to stock ROM ?

Hi how do i go about flashing my HD2 back to stock English: 3.14.405.2 ROM ?! as i'd like to sell it now. i have an artemis rom, cotulla HSPL 2.08 and a splash screen from an old chucky ROm i'd like to get rid of !!
so how do i do this safely ?cheers dom
p.s will i still be able to boot into an sd build of android from a stock rom ??

into bootloader, 'serial' --> 'USB'
run hspl4 choose 2.08.0000 (or 3.03.0000, or in fact any that end .0000, teh next step will upgrade it anyway, so long as it ends .0000)
into bootloader, 'serial' --> 'USB'
run 3.14 rom .exe
done.
(this assumes you have the correct 3.14 rom, not just the default stock rom. i.e if your phone is from o2 you need the o2 3.14 rom)
PS yes

Oh right thank you for your quick reply! I think I'll just flash a stock rom so I can sell the phone as unlocked! Thanks again for your help! !!
Sent from my HTC Desire using XDA App

onisuk said:
so I can sell the phone as unlocked!
Click to expand...
Click to collapse
you cant relock an unlocked phone anyway, no matter what you flash.
Dont confuse sim lock and rom lock, Totally unconnected.
a sim unlocked phone will still need hspl to flash, and a flashed phone isn't sim unlocked.

samsamuel said:
into bootloader, 'serial' --> 'USB'
run hspl4 choose 2.08.0000 (or 3.03.0000, or in fact any that end .0000, teh next step will upgrade it anyway, so long as it ends .0000)
into bootloader, 'serial' --> 'USB'
run 3.14 rom .exe
done.
(this assumes you have the correct 3.14 rom, not just the default stock rom. i.e if your phone is from o2 you need the o2 3.14 rom)
PS yes
Click to expand...
Click to collapse
oh crap.
i just flashed straight back to stock without doing any of this... have i screwed up?
Also i did it because it keeps crashing and overheating so i was going to try it on stock and if it kept doing it i was going to send it back to htc - will they be able to tell i tried a custom rom?
(seems to be working fine though)
EDIT:
another question - will this have changed my radio back to stock too - or do I have to do this manually?

where can i download the new stock rom as the HTC site says its now for my phone....(probably because it was an O2 branded rom before)

theres an O2 update as well on the HTC website?
Otherwise the latest ones are on here:
http://forum.xda-developers.com/showthread.php?t=623283
I managed to sort mine - turns out you have to do it via SD and it does everything bootloader, ROM and radio. (although it failed the first time and i almost made a mess in my trousers)
If anyones interested the instructions are (taken from HSPL4 app):
- Take any "RUU_signed.nbh" from a ship ROM and copy it to SD card.
- Rename it to "leoimg.nbh"
- Reset the device while pressing the volume down button.
I also formatted the SD before copying it over.

No there was only one for t mobile !
cheers for the link matey

yea its odd that, the o2 3.14 rom is there via direct link, has been since saturday, but still doesn't show if you navigate to the rom updates page on htc.uk

ok updated the hspl fine...but when i try to flash the new WWE rom i get an "invalid vendor id" at 1% and the flash fails

righty all sorted ! the O2 rom was on the UK site i was being dumb and look on htc Europe site !
all flashed and working fine now

28002 not allow message from an rom update

Hello.
I have an HD2 with broken usb port, without hspl, so i must flash an official rom. I bought it used from UK, so i've downloaded all official roms from HTC UK (wwe,tm, O2, Vod). renamed every one as leoimg.nbh and tried to flash from SD card. Every time i get an 28002 not allow message. As far as i know, hspl cannot be installed without USB, so i'm stuck to the bootloader screen.
Is there any solution or any idea how to move on?
Thank you anyway...

Call HTC support and have them confirm which rom you need from the serial.
What shows in bootloader? Especially the top line?