Database Users

HSPL Back to original SPL anyone succeed it ?

Hi,
I have a little issue: I HSPL my HD2 no problem with . It's just my phone have a hardware problem & I wanna go back to Original SPL 1.42000. I found the original rom made for my branded handy
extract and rename the .nbh
format sdcard in proper format.
neither in sync nor in bootloader mode. Invalid vendor ID. Rom Upgrade issue for me.
How can I uninstall the HSPL ?
PS/ I tried all words given by bepe and other's concerning issues. I didn't found it. I must sent back my phone soon for warrantly reason...

Did you try to install the ROM from HTC website or did you find an Orange specific ROM?

It is an orange specific rom. cause it is a branded handy.
I even try from HTC website one but no satisfaction. I think it is normal by this one ?

I have a non branded "german" device.
I decided to go back from the HSPL to the stock SPL.
I wanted to flash with the Turkey 1.61 rom to have after this procedure the newest radio 2.07 on it.
I have followed the steps from bepe
But my SD card has a "goldcard" file on it.
Go to the HSPL thread and see my post #383
http://forum.xda-developers.com/showthread.php?t=611433
I have noted down all outputs during flashing.
At least I would give it a try and use a "Goldcard" to get back your original rom.
Hope it helps & Good luck!
dingolino
doudaix said:
Hi,
I have a little issue: I HSPL my HD2 no problem with . It's just my phone have a hardware problem & I wanna go back to Original SPL 1.42000. I found the original rom made for my branded handy
extract and rename the .nbh
format sdcard in proper format.
neither in sync nor in bootloader mode. Invalid vendor ID. Rom Upgrade issue for me.
How can I uninstall the HSPL ?
PS/ I tried all words given by bepe and other's concerning issues. I didn't found it. I must sent back my phone soon for warrantly reason...
Click to expand...
Click to collapse

In addition to what the previous poster described:
One can definitely flash the original ROM using the SD card to uninstall HSPL.
Many people do it by accident...
That being said, one question: Are you sure you have the correct ROM file?
You know, the error you mention only arises if you have to answer "no" to that question.

doudaix said:
Hi,
I have a little issue: I HSPL my HD2 no problem with . It's just my phone have a hardware problem & I wanna go back to Original SPL 1.42000. I found the original rom made for my branded handy
extract and rename the .nbh
format sdcard in proper format.
neither in sync nor in bootloader mode. Invalid vendor ID. Rom Upgrade issue for me.
How can I uninstall the HSPL ?
PS/ I tried all words given by bepe and other's concerning issues. I didn't found it. I must sent back my phone soon for warrantly reason...
Click to expand...
Click to collapse
SD card should be formated FAT32. The original one is FAT16

What does it exactly mean: "One can definitely flash the original ROM using the SD card to uninstall HSPL"
We can uninstall HSPL by loading the .nbh from the official ROM from htc website from fat32 formated sd card ?
If the answer is yes, I have done it many times but no satisfaction.
Yes I use the proper and official htc and/or orange .nbh.
How to get out please.
tictac0566 said:
In addition to what the previous poster described:
One can definitely flash the original ROM using the SD card to uninstall HSPL.
Many people do it by accident...
That being said, one question: Are you sure you have the correct ROM file?
You know, the error you mention only arises if you have to answer "no" to that question.
Click to expand...
Click to collapse

doudaix said:
What does it exactly mean: "One can definitely flash the original ROM using the SD card to uninstall HSPL"
We can uninstall HSPL by loading the .nbh from the official ROM from htc website from fat32 formated sd card ?
If the answer is yes, I have done it many times but no satisfaction.
Yes I use the proper and official htc and/or orange .nbh.
How to get out please.
Click to expand...
Click to collapse
looks like the good way. is the nbh file calla LEOING.nbg in your SD card ?

doudaix said:
What does it exactly mean: "One can definitely flash the original ROM using the SD card to uninstall HSPL"
We can uninstall HSPL by loading the .nbh from the official ROM from htc website from fat32 formated sd card ?
If the answer is yes, I have done it many times but no satisfaction.
Yes I use the proper and official htc and/or orange .nbh.
How to get out please.
Click to expand...
Click to collapse
If you do all steps in the correct way, flashing the original nbh with the SD card will definitely overwrite HSPL with stock SPL.
It has happened to quite a lot of people who were not aware of the fact that this happens when flashing a stock ROM with this method.
When you get a wrong carrier ID error message, you don´t have the right ROM, as the device will only allow to flash ROMs with the correct CID, be it HTC or operator stock ROMs.
Did you check the SPL version after the process with the SD card? If it says 1.42.0000, why don´t you try flashing with the original RUU?

yes confirm
tictac0566 said:
If you do all steps in the correct way, flashing the original nbh with the SD card will definitely overwrite HSPL with stock SPL.
It has happened to quite a lot of people who were not aware of the fact that this happens when flashing a stock ROM with with this method.
When you get a wrong carrier ID error message, you don´t have the right ROM, as the device will only allow to flash ROMs with the correct CID, be it HTC or operator stock ROMs.
Did you check the SPL version after the process with the SD card? If it says 1.42.0000, why don´t you try flashing with the original RUU?
Click to expand...
Click to collapse
I confirm: it happends to me: when I flashed the 1.61 HTC official rom from my SD, it replace the HSPL by the original SPL of HTC.

hi all, just want to share..
stock spl is 1.42 and after hspl 1.42hspl or 1.42.6666 if i'm not mistaken.
if to unsintall this hspl, i use flash using sd card method and it will re write radio and spl back to 1.42.
i also using turkey stock rom, but we cannot flash turkey stock rom using sd card method as it will rewrite spl and will give you error. wrong region. if this happen, in 3 colour mode, run you hspl. when it restart, make sure you push volume down button to get back in tricolour mode. if you not pushing vol down button, it will also boot in tricolour but hspl wont work, happen to me, spl back to 1.42.000. the flash using custom ruu.
just sharing with you guys.

Steve0007 said:
looks like the good way. is the nbh file calla LEOING.nbg in your SD card ?
Click to expand...
Click to collapse
It should be LEOIMG.nbh.

dont forget you might want to use MTTY to do task29 to format the device instead of CustomRUU.exe
tbh you can probably use the RUU from HTC if you have HSPL anyway.
p.s. yeah LEOIMG.nbh - LEOING.nbg made me smile - finger-twister

Okay I have tested restoring SPL1.42.0000 on a vendor-id'd phone.
Tried 2 ways of formatting the SD card:
a. formatting the sd card to FAT32 via Diskdrive mode connected to pc
b. Formatted in HD2 using onboard utility in HD2.
Tried 2 images but not the vendor-id image since I do not have that image.
a. Vendor ROM but in different language
b. Stock ROM HTC
Tried 2 ways of changing SPL back to 1.42.0000
a. Reset + vol down shows a 1 second message "Checking.", after that it immediately goes to the blue-green-red bootscreen showing bootloader 1.42.HSPL
b. From bootloader connect USB to pc and flash using stock RUU.
All combinations of above I can not restore SPL. Must be because HD2 requires correct ROM image + correct vendor-id.
Is there possibly a way to remove HSPL in some way without the original vendor image? Goldcard?

Check out my video on reverting back to stock spl
Its in my signature.
Not sure if its the same for locked devices though, just have a look

[★] said:
Check out my video on reverting back to stock spl
Its in my signature.
Not sure if its the same for locked devices though, just have a look
Click to expand...
Click to collapse
very good manual that is. In video manual is exactly the procedure I did. However the vendor-id'd HD2 won't get to the point where the image can be flashed. It gets to the point up to 1:37-1:38 in your video where the word "Checking..." blinks in an instant. After that it returns to bootloader screen.
So no luck yet

htc12345 said:
very good manual that is. In video manual is exactly the procedure I did. However the vendor-id'd HD2 won't get to the point where the image can be flashed. It gets to the point up to 1:37-1:38 in your video where the word "Checking..." blinks in an instant. After that it returns to bootloader screen.
So no luck yet
Click to expand...
Click to collapse
Oh sorry man

Goldcard also tried and no luck.
Every time I reboot to bootloader it gives the colored screen, proceeds to white screen with blue letters, in an instant shows: "Loading..." ..followed by: "Checking..." ..and then returns to colored bootloader main screen.
edit:
I keep thinking whether it is normal or not that the white screen doesn't show any kind of confirmation that it did actually find any nbh file whether it is valid or not. Maybe it just exits when the nbh is not valid, that may be the case.
However I have now ran the routine a whole lot of times and make zero progress.
Maybe better continue the search for the correct ROM to flash with.

just try one of the official roms posted in the official roms thread. don't try 1.61 - only 1.43/48

I have tried all official roms posted including 1.43 and 1.48 and up without success. The bootloader wouldn't go further after having checked the SD card contents. It did not work at all.
Finally now I bricked (I hope temporarily) my HD2 by trying to install the latest official 2.02 from the RUU.
Strange things have happened here.
I had earlier copied an 148 or so nbh to sd card. Bootloader would't work out as explained in posts above. So after all (with card with 148 nbh still inside) I figured it was time to check what ROM 2.02 would do, since I believe it would overwrite all SPL including HSPL since it is a v2 SPL. At least I hoped.
When I opened the RUU, it did reboot the phone as it is supposed to do with RUU.
Few things happened:
a. The phone booted in bootloader and showed me the white step screen which indicated there was a nbh about to be flashed. This was the nbh on the card!
b. The RUU errored with error 260 that the connection was lost. I have never lost a connection, must be because file on sd card took control.
c. Since connection was lost and the phone wanted a flash from the sd card I pressed vol up to continue update. it did start updating... but at about 9% I got a big triangle /exclamation mark, and HD2 stopped updating.
Reboot. Guess what??? SPL 1.42.0000 in bootloader now. From the nbh on the card.
But NO boot, NO radio .... After all I managed to destroy phone and HSPL.
Had to goldcard my way back in. However, problem solved!

HD2 bricked ? Attempted to install UK WWE 1.66 onto Voda HD2 with HPSL

Help!
First time attempt at using HPSL and may have bricked my HD2 :-(
I have a Voda supplied HD2 so can't install the stock ROMs directly...I thought I would be able to do so via HPSL, but it seems not. I was trying to install 1.66 (UK WWE) following the HPSL for dummies guide, and did the following:
- installed HPSL onto HD2, confirmed by going into bootloader
- put nbh file (extracted from stock .exe) onto SD card, named LEOIMG.nbh
- entered bootloader and chose flash option via power button
- flash started (minimal progress)
- within 2mins error showed
- now going into bootloader shows
00028002
Not allow
then..
SPL-1.42.0000 :-(
Upgrade ROM code error Please try again
If I start normally I get a warning triangle.
How can I get my HD2 back from the dead, ideally with 1.66 rather than the crummy Voda 1.43? (can anyone point me at a stock ROM for the voda 1.43, perhaps that would at least unbrick it?)
Help!!!!
*EDIT* Currently downloading the Voda 1.43 image, hoping I can at least get that back and running...if that works will still be keen to find out how to apply stock 1.66 via HPSL (bearing in mind that the CID lock(?) means I can't apply 1.66 on my voda device thru normal means)

CraigBruce said:
(can anyone point me at a stock ROM for the voda 1.43, perhaps that would at least unbrick it?)Help!!!!
Click to expand...
Click to collapse
The 3rd sticky down in the HD2 ROM Development thread is titled, "[REF]Leo Official ROMs" - Click that.
Then click, "Shared folder for shipped Leo ROMs".
The first "box" will have the title "Leo 1.43" under it. Click the hand carrying the folder icon.
You'll be greeted with 3 ROM's, select RUU_Leo_Vodafone_UK_1.43.405.1_Radio_Signed_15.26. 50.07U_2.04.50.22_2_Ship.exe and download it.
Hope that helps.
Good luck with getting your phone back up and running.

Your device is not bricked. I think you have not installed HSPL properly.
Try installing HSPL again. As it seems your HSPL is not installed properly. Follow the following instructions very carefully :
Connect your phone to USB
I think when you boot in by default your device goes into bootloader if not press volume down + power butoon on the same time, your phone will enter tri color bootloader mode.
At the bottom of your screen it shoul show "USB"
Now download the HSPL.zip file(I have attached it here)
Now run HSPL.exe and follow the onscreen insteuctions.(Mostly you have nothing to do it will start installing automatically)
After a while on the screen of your phone a text will appear saying "We hacked it". If this text is displayed then everything went ok. Now confirm by clicking yes on the computer screen and it will finish the process.
All done.
Your phone will restart.
If you want to check that your fone has HSPL then press volume down+power key at the same time. The phone will enter into bootloader and should show "cotullaHSPL".
Now you can install any ROM and it will run properly.

Thanks - had just found that and started downloading as you posted this..fingers crossed! If this works will still be keen on ways to apply 1.66 (stock) to my voda CID locked device.

ankush1492 said:
Your device is not bricked. I think you have not installed HSPL properly.
<snip>
After a while on the screen of your phone a text will appear saying "We hacked it". If this text is displayed then everything went ok. Now confirm by clicking yes on the computer screen and it will finish the process.
All done.
Your phone will restart.
If you want to check that your fone has HSPL then press volume down+power key at the same time. The phone will enter into bootloader and should show "cotullaHSPL".
Click to expand...
Click to collapse
This is exactly what happened 1st time I installed HSPL...however trying it again did get the phone back and apparenty healthy again....thanks!
So - 2nd attempt to flash the 1.66 ROM, same as before. Confirmed HSPL installed via tri-colour bootloader screen, selected (via power button) option to flash from SD. Progress bar gets to (max) 10%, Warning triangle briefly shows then phone goes back to tricolour bootloader (but with std. SPL version) and nothing more happens.
Should I be waiting longer ? i.e. is the phone potentially still flashing when on the tricolour, std. SPL, screen ? Not flashed an HD2 before so not 100% sure I'm doing this right..will double check videos on this site, sure I'm just being stupid/impatient/not read enough....may try downloading the ROM again incase corrupted.
Anyway, HSPL installed for 3rd time and phone appears fine back running with 1.43.

People please read the HSPL thread properly, once you have installed the HSPL you CANNOT install from SD card you HAVE TO USE THE PC to install any rom images that are not original HTC.

CraigBruce said:
This is exactly what happened 1st time I installed HSPL...however trying it again did get the phone back and apparenty healthy again....thanks!
So - 2nd attempt to flash the 1.66 ROM, same as before. Confirmed HSPL installed via tri-colour bootloader screen, selected (via power button) option to flash from SD. Progress bar gets to (max) 10%, Warning triangle briefly shows then phone goes back to tricolour bootloader (but with std. SPL version) and nothing more happens.
Should I be waiting longer ? i.e. is the phone potentially still flashing when on the tricolour, std. SPL, screen ? Not flashed an HD2 before so not 100% sure I'm doing this right..will double check videos on this site, sure I'm just being stupid/impatient/not read enough....may try downloading the ROM again incase corrupted.
Anyway, HSPL installed for 3rd time and phone appears fine back running with 1.43.
Click to expand...
Click to collapse
Yeah, the 1.66 ROM you've downloaded may be corrupted. And next time, try installing the ROM with USB connection and the ROM's .exe file. You SPL is reverting back to stock, so it's possible that the culprit is flashing with SD.

OK, problem solved...
Rather than installing the stock ROM via HSPL bootloader I installed HSPL and then ran the RUU exe for the stock ROM. Phone now upgraded

dragon_soft said:
People please read the HSPL thread properly, once you have installed the HSPL you CANNOT install from SD card you HAVE TO USE THE PC to install any rom images that are not original HTC.
Click to expand...
Click to collapse
Thats not true, you can flash custom roms with hspl from an sd card
see my video *here*

dragon_soft said:
People please read the HSPL thread properly, once you have installed the HSPL you CANNOT install from SD card you HAVE TO USE THE PC to install any rom images that are not original HTC.
Click to expand...
Click to collapse
[★] said:
Thats not true, you can flash custom roms with hspl from an sd card
see my video *here*
Click to expand...
Click to collapse
I believe Dragon Soft was possibly referring to not using a stock ROM from SD? If I remember correctly flashing a Stock ROM from SD with HSPL on will remove HSPL.
So in other words, if you have HSPL and want to have a stock ROM, it is best install it from the PC when connected via ActiveSync as this won't affect the HSPL.
Custom ROM absolutely no probs with flashing from SD, the HSPL will stay intact, good work on the video ★

CraigBruce said:
OK, problem solved...
Rather than installing the stock ROM via HSPL bootloader I installed HSPL and then ran the RUU exe for the stock ROM. Phone now upgraded
Click to expand...
Click to collapse
Ok. I think you were trying to install official ROM. When you install an official rom your bootloader will revert back to SPL...
dragon_soft said:
People please read the HSPL thread properly, once you have installed the HSPL you CANNOT install from SD card you HAVE TO USE THE PC to install any rom images that are not original HTC.
Click to expand...
Click to collapse
thats not true. After HSPL you can intall directly from sd card..I have done it almost 100 times.

Ibb1982 said:
I believe Dragon Soft was possibly referring to not using a stock ROM from SD? If I remember correctly flashing a Stock ROM from SD with HSPL on will remove HSPL.
So in other words, if you have HSPL and want to have a stock ROM, it is best install it from the PC when connected via ActiveSync as this won't affect the HSPL.
Custom ROM absolutely no probs with flashing from SD, the HSPL will stay intact, good work on the video ★
Click to expand...
Click to collapse
Well if he does mean that then fair enough, I just thought that he meant custom when he said "that are not official" but whatever, sorry for the mis understanding

Ibb1982 said:
So in other words, if you have HSPL and want to have a stock ROM, it is best install it from the PC when connected via ActiveSync as this won't affect the HSPL.
Click to expand...
Click to collapse
I got my Leo two days ago, went home, put HSPL on it in the first place, wanted to upgrade the stock ROM, and ended up same as CraigBruce. Really frustrating, thought I'd bricked it. So I re-flashed HSPL and this time a custom ROM and it was back up again.
Now I know that I should have flashed the stock ROM via ActiveSync and not SD card which would have left the HSPL intact. I will definitely remember that for the future

just remember that some people WANT to remove HSPL when installing a stock ROM - e.g. when returning device.
tbh it should have worked with stock ROM and sdcard as leoimg.nbh - it is the way listed in HSPL thread to uninstall after all!!! we dont always want to use customRUU!!!
As from the noob flashing thread
NOTE: The only way to remove the HSPL is to flash an original SPL from microSD card
* You can also use this method to flash back your Stock Rom and Stock SPL that you originally had on your phone*
VIDEO TUTORIAL: [★] has made a YouTube video to walk people through flashing a Stock SPL via activesync. Find it *HERE*
- Download a shipped Rom from *HERE*
- Rename the extension to .zip
- open it with winzip and extract the RUU_signed.nbh file to a folder
- Rename it to LEOIMG.nbh and copy it to the root of a microSD card thats been formatted to FAT32
- Insert your storage card into your phone
- Enter Bootloader and follow onscreen instructions to flash
Click to expand...
Click to collapse

Guys, I had reached the exact same issue with the NOT ALLOW problem. And people, we do read some times (the newbies) and nowhere but here you say that AFTER HSPL YOU MUST NOT UGPRADE FROM MEMORY CARD!!!! And NO it is not included inhere: http://forum.xda-developers.com/showthread.php?t=609477
Cheers,
and thanks to all the smart people inhere!
D

thug_life_inc said:
Guys, I had reached the exact same issue with the NOT ALLOW problem. And people, we do read some times (the newbies) and nowhere but here you say that AFTER HSPL YOU MUST NOT UGPRADE FROM MEMORY CARD!!!! And NO it is not included inhere: http://forum.xda-developers.com/showthread.php?t=609477
Cheers,
and thanks to all the smart people inhere!
D
Click to expand...
Click to collapse
With hspl installed you CAN flash CUSTOM roms using sd card, it is only flashing OFFICIAL roms through sd card that removes hspl.

sorry to crash this thread but...
i have flashed HSPL on to my HD2 and am now wanting to install HTC's new 1.66 rom.
i have a VF hd2 so i am a little worried i will hit the same issues as the OP did.
can some one hold my hand through flashing the ROM as im a complete noob to this.. i have read the FAQs and im a bit like with all the acronyms etc

adam_r said:
sorry to crash this thread but...
i have flashed HSPL on to my HD2 and am now wanting to install HTC's new 1.66 rom.
i have a VF hd2 so i am a little worried i will hit the same issues as the OP did.
can some one hold my hand through flashing the ROM as im a complete noob to this.. i have read the FAQs and im a bit like with all the acronyms etc
Click to expand...
Click to collapse
Use the custom ruu to flash it. Do not put the nbh on the sd. I quote from the "[HSPL]How to flash everything" thread:
4) Uninstallation
Only way to remove the HSPL is to flash an original SPL from SD card.
- Take any "RUU_signed.nbh" from a ship ROM and copy it to SD card.
- Rename it to "leoimg.nbh"
- Reset the device while pressing the volume down button.
Click to expand...
Click to collapse
Why people cant read? refering to the person who started this thread.

No Problem Flashhing to 1.66 on a Voda HD2 with HSPL
I have a voda HD2 and being a total Newbie to the HTC / WM .. I followed the Dummie guide.. (thanx to all, for that.. fantastic..) installed HSPL..and then installed the latest 1.66 from the HTC site using a boggus serial number.. As actual would not let me download it. No problemo..
Feeling a bit more adventureous.. any suggestions for the best 'cooked Rom' ??

From my understanding, you can flash away Stock ROMS using activesync. No need for HSPL.

Telstra Rom - not flashing

Folks,
HD2 from Telstra ( 2nd May ) running 1.66. Tried flashing it with 1.48 and 1.43 Rom's -- so I could then go to HSPL and a custom Rom, but no luck.
The Rom Update Utility starts and tells me I have image version 1.72.841.0, I click to update to 1.43.405.1 ( or 1.48 - have tried both ), then the 4 colour screen which notes 1.66. Then it goes to a HTC screen with a deployment bar, gets to only 1%.......then boom - error 294 invalid vendor id.......
What am I missing here ??

you need to flash thedowngrade from sd card, then you can hspl, and THEN flash from usb

At least your effort got that far.... i couldnt even see the zip open.
OS 5.2.21869
Manila 2.5.20121431.1
Rom 1.72.841.0
If someone can confirm what I need to do with what i'd REALLY appreciate it.
Have the backup rom just incase already.

you missed out all the important info.
what zip can't you open? what phone? what you trying to achieve?
assuming telstra like the op,
1 right click the telstra 1.4 rom .exe choose unzip here, or extract here
2 find ruu signed.nbh copy it to sd card rename it leoimg.nbh
3 phone off hold vol down, tap and release power, keep holding voldown till you see three coloured screen, should quickly change grey and start a card flash.
4 when complete and phone restarts hold vol down to re enter bootloader
5 run hspl as administrator using a usb port round the back of the pc,
6 when it completes, and phone reboots, enter bootloader yet again, and check that it says spl 1.42.hspl.
now, so long as you don't sd card flash hspl will stay and protect against bad flashes, flash what you like.

tmenyweather said:
Folks,
HD2 from Telstra ( 2nd May ) running 1.66. Tried flashing it with 1.48 and 1.43 Rom's -- so I could then go to HSPL and a custom Rom, but no luck.
The Rom Update Utility starts and tells me I have image version 1.72.841.0, I click to update to 1.43.405.1 ( or 1.48 - have tried both ), then the 4 colour screen which notes 1.66. Then it goes to a HTC screen with a deployment bar, gets to only 1%.......then boom - error 294 invalid vendor id.......
What am I missing here ??
Click to expand...
Click to collapse
What 1.48 and 1.43 roms did you try? They need to be Telstra roms, as you can't just use any 1.48 or 1.43 rom and this is what is causing the invalid vendor id error. Once you are back to 1.42.0000 spl (after flashing a telstra rom) you can then run hspl and are then free to flash what ever your heart desires.

I have a Telstra HD2 as well (1.66)...got it recently and will flash it soon.
I don't understand the original poster's concern - why go through all that to flash HSPL, when apparently HSPL2 can be easily flashed over 1.66...which allows you to further flash any ROM ??? Is there a benefit of HSPL over HSPL2 that I am missing?
Thanks in advance
edit: my bad, just read in the HSPL thread that HSPL2 does not work with the telstra hd2.

TyII said:
I have a Telstra HD2 as well (1.66)...got it recently and will flash it soon.
I don't understand the original poster's concern - why go through all that to flash HSPL, when apparently HSPL2 can be easily flashed over 1.66...which allows you to further flash any ROM ??? Is there a benefit of HSPL over HSPL2 that I am missing?
Thanks in advance
Click to expand...
Click to collapse
keep reading, you still have lots to learn, hspl2 doesn't work on telstra.

Oh, my spl is 1.66.0000
I understand I must use HSPL (not HSPL2) on a Telstra ph. but can anyone recommend which rom to use? I've been reading for two days solid and can't decide!
I've copied all the guides etc so hopefully won't have a prob'... am just worried about warranty protection etc if it all goes pear shaped... i just want all this B.S. bloatware OFF MY phone!!!
Thanx in advance once again

I am in the same position, my Telstra ROM is 1.72 running SPL 1.66.0000.
HSPL utility tells me that "Model ID is invalid" or something like that.

okay, one more time.....
only the original hspl works on telstra,
hspl2 does not work. (bad model ID)
you need to downgrade to a 1.4 rom with spl 1.42.0000.
so, get the original telstra 1.49.8xx rom from HERE (registration required)
when its downloaded, move it to its own folder somewhere, then right click the .exe file and choose extract here. (if that option isnt available, install winrar)
when it has extracted, find teh file RUU_Signed.nbh, copy it to your sd card and rename it leoimg.nbh
restart your phone in bootloader mode, it should detect the leoimg.nbh and start to flash
this will reset your spl to 1.42.0000 and now you can use HSPL, and then flash any rom you like.

Thanks for the link to HTCpedia mate. I'd actually just found it myself by performing a thread search on the "Official HTC ROM's" thread. Downloading now.
Stupidly I've had problems after problems trying to get HSPL on my device. I actually started out on this ROM (1.49.x with SPL 1.42.0000). First I tried flashing from my Vista x64 machine, both HSPL2 and HSPL with errors, in my haste I thought I might need update to the latest Telstra ROM 1.72.x with SPL 1.66.0000 so I could use HSPL2 when in actual fact I just had the x64 USB driver problem, of course then the upgrade still didn't allow me to flash and made my situation harder as I had to find this original ROM again to downgrade.
Anyways I hope this works!

It works!
- flash rom back to 1.49.x with SPL 1.42.0000
- run HSPL with device connected via USB
- flash radio using CustomRUU
- flash ROM using CustomRUU

@rainey06au what Radio do you use with your Telstra HD2?

Got my Telstra HD2 running 1.49 last week and it's my first play with Windows Mobile .. couldn't wait to clear the Telstra image from the phone as my provider is Three.
Did plenty of reading and all the posts said to use the original HSPL first, this worked perfect first go.
Once done I tried the new Artemis_v110 rom, was very impressed except experienced 2 to 3 random reboots a day, even more while in YouTube player. Everything else woked well, reception, battery life, and clarity while on calls.
Decided yesterday to try another rom, first cleared all using Task29 format, then loaded HyperROM Ultimate v9.00 WM6.5.X but this didn't get through the first boot .. possibly due to radio required.
Now have flashed back to 1.48.4052 until I research some more.
Anyone recommend a rom and suitable radio for the Telstra HD2, anyone with Three?
Thankx

Thanks. Works a treat!
I knew I had to downgrade but couldn't find an old Telstra ROM.
samsamuel said:
you missed out all the important info.
what zip can't you open? what phone? what you trying to achieve?
assuming telstra like the op,
1 right click the telstra 1.4 rom .exe choose unzip here, or extract here
2 find ruu signed.nbh copy it to sd card rename it leoimg.nbh
3 phone off hold vol down, tap and release power, keep holding voldown till you see three coloured screen, should quickly change grey and start a card flash.
4 when complete and phone restarts hold vol down to re enter bootloader
5 run hspl as administrator using a usb port round the back of the pc,
6 when it completes, and phone reboots, enter bootloader yet again, and check that it says spl 1.42.hspl.
now, so long as you don't sd card flash hspl will stay and protect against bad flashes, flash what you like.
Click to expand...
Click to collapse

I am also using Telstra HD2 and recently flashed it with Miri Rom. I like Miri because it doesn't have any customization. It has many versions to choose from, with and without Sense UI. It also retain all the original WM icons and themes which I like.
But like all ROMs, I do experience reboot but only once so far with the new version of Miri v17. One thing to note is the Radio version for the ROM. Make sure you flash the exact correct radio version, down to the sub version, e.g. 2.07.50 is recommended for Miri and not 2.07.51 (which is the Telstra radio version).
Another advise is always flash from pc, not SD card as I have experienced bad flash using SD card.
Hope this helps. Miri is only available from the HTCPedia site.

Yep my radio version is also 2.07.50. I get good battery life out of it using CleanEX_UDT HyperROM Ultra v9.00 (6.5).

I use Lia Glass ROM and FallOut Theme.
Interestingly this ROM and radio has only unlocked 455.54MB RAM, not the full 576MB. There are threads about this and getting the right combo will unlock the remaining RAM and/or improve battery performance.
I am using Radio 2.08.50.05.
Anyone else have the same experience?

ajt320 said:
I use Lia Glass ROM and FallOut Theme.
Interestingly this ROM and radio has only unlocked 455.54MB RAM, not the full 576MB. There are threads about this and getting the right combo will unlock the remaining RAM and/or improve battery performance.
I am using Radio 2.08.50.05.
Anyone else have the same experience?
Click to expand...
Click to collapse
look in settings about phone hardware info ram size.
I bet it says 576
that's cos the hardware takes 128 for graphics.
look st a standard rom and hardware will show 448 whilst total available will show 336

Thanks samsamuel.
Hardware info does in fact say 576MB RAM
Thanks for the explanation - slowly but surely getting my head around the intricacies of the device

Unable to Flash Roms with all versions of HSPL

hi,
a little fusrated here, Ive been trying to get my hd2 (originaly purchased from vodaphone in greece) to boot into windows.
i have tried flashing all diffrent ROMS with including, with HSPL installed (all versions from HSPL2):
from SD: original greek ROM from htc site, successful once but still no boot
usb: original WWE rom and UK vodaphone updated rom (1.77), also several cooked roms with radio version 2.08.50.05 and TASK29 flashed before attempting.
Even after several successful flashes from HTC offical ROM (which include radios if im not mistaken) the phone still doesnt boot, white htv screen or silver warning sign on black backround appear.
am i making a total noob mistake here, i have in my mind followed every combination of HSPL number, radio, HTC offical ROMS and even the HTC_ELL (greek rom) from SD. the only one i havent managed to find is the vodaphone GREEK rom from vodaphone.gr
any help at all would be excellent, its been a week of sleepless nights here, i really lossing hope.
this is hell! please help.

Have you tried flashing ur stock rom with use of a goldcard?
Else flash HSPL 1.42/1.66 and try this ROM: http://www.vbnfiles.com/xda/xmoo/Le...Radio_Signed_15.14.50.07U_2.02.50.21_Test.zip

hi, thanks for fast response. no i have not tried using the goldcard. i havent been able to figure that one out exactly where i download it
ok, im trying that rom now with hspl 1.66 xe

im at work now and think ive got XP usb driver issues from here (win7 from home works fine), although hspl flash works ROM flashing stays at 0%
any ideas about usb drivers? (active sync not installed)

302 error, got to 7%. do you think usb error.

djgknight said:
302 error, got to 7%. do you think usb error.
Click to expand...
Click to collapse
Is that the rom I gave you?
7/9% is most of the times CID Lock or the Radio.
Have you tried flashing stock rom trough SD-Card??

hi, yes have tried HTC stock ELL ROM through SD:
RUU_Leo_HTC_ELL_1.48.482.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship.exe
doesnt boot either.

djgknight said:
hi, yes have tried HTC stock ELL ROM through SD:
RUU_Leo_HTC_ELL_1.48.482.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship.exe
doesnt boot either.
Click to expand...
Click to collapse
Well urs has a Vodafone CID lock.
So flash the stock Vodafone ELL rom using sd-card, or flash HTC ELL using goldcard!

i though that there was no need to CID unlock if you have a version of HSPL on your device, i never even though of that.
I still cannot locate the the offical vodaphone ELL ROM (which i dont really want as it is in greek).
back to the start i suppose ?

Well ur bootloader seems to be corrupted. So we need to go back to the roots. And then start again, so that's why we need stock rom, or flash stock rom using goldcard!

xmoo said:
Well ur bootloader seems to be corrupted. So we need to go back to the roots. And then start again, so that's why we need stock rom, or flash stock rom using goldcard!
Click to expand...
Click to collapse
ahh, like the sound of that. it seems to make sense. ill do that now and get back to you. thanks muchly for the help btw.
/djgknight

xmoo said:
Have you tried flashing ur stock rom with use of a goldcard?
Else flash HSPL 1.42/1.66 and try this ROM: http://www.vbnfiles.com/xda/xmoo/Le...Radio_Signed_15.14.50.07U_2.02.50.21_Test.zip
Click to expand...
Click to collapse
i've had no luck with flashing the stock ROM with SD, none of the HSPL2 versions will load from SD anymore (just a double flash of the screen).
i did try now to flash the ROM you gave me today (above) and get that rom's splash screen "not for sale" appear but still no boot.
should i try a task29 again? what to do if wont even boot leoimg from SD ??

[Q] Flashing phone to stock ROM ?

Hi how do i go about flashing my HD2 back to stock English: 3.14.405.2 ROM ?! as i'd like to sell it now. i have an artemis rom, cotulla HSPL 2.08 and a splash screen from an old chucky ROm i'd like to get rid of !!
so how do i do this safely ?cheers dom
p.s will i still be able to boot into an sd build of android from a stock rom ??

into bootloader, 'serial' --> 'USB'
run hspl4 choose 2.08.0000 (or 3.03.0000, or in fact any that end .0000, teh next step will upgrade it anyway, so long as it ends .0000)
into bootloader, 'serial' --> 'USB'
run 3.14 rom .exe
done.
(this assumes you have the correct 3.14 rom, not just the default stock rom. i.e if your phone is from o2 you need the o2 3.14 rom)
PS yes

Oh right thank you for your quick reply! I think I'll just flash a stock rom so I can sell the phone as unlocked! Thanks again for your help! !!
Sent from my HTC Desire using XDA App

onisuk said:
so I can sell the phone as unlocked!
Click to expand...
Click to collapse
you cant relock an unlocked phone anyway, no matter what you flash.
Dont confuse sim lock and rom lock, Totally unconnected.
a sim unlocked phone will still need hspl to flash, and a flashed phone isn't sim unlocked.

samsamuel said:
into bootloader, 'serial' --> 'USB'
run hspl4 choose 2.08.0000 (or 3.03.0000, or in fact any that end .0000, teh next step will upgrade it anyway, so long as it ends .0000)
into bootloader, 'serial' --> 'USB'
run 3.14 rom .exe
done.
(this assumes you have the correct 3.14 rom, not just the default stock rom. i.e if your phone is from o2 you need the o2 3.14 rom)
PS yes
Click to expand...
Click to collapse
oh crap.
i just flashed straight back to stock without doing any of this... have i screwed up?
Also i did it because it keeps crashing and overheating so i was going to try it on stock and if it kept doing it i was going to send it back to htc - will they be able to tell i tried a custom rom?
(seems to be working fine though)
EDIT:
another question - will this have changed my radio back to stock too - or do I have to do this manually?

where can i download the new stock rom as the HTC site says its now for my phone....(probably because it was an O2 branded rom before)

theres an O2 update as well on the HTC website?
Otherwise the latest ones are on here:
http://forum.xda-developers.com/showthread.php?t=623283
I managed to sort mine - turns out you have to do it via SD and it does everything bootloader, ROM and radio. (although it failed the first time and i almost made a mess in my trousers)
If anyones interested the instructions are (taken from HSPL4 app):
- Take any "RUU_signed.nbh" from a ship ROM and copy it to SD card.
- Rename it to "leoimg.nbh"
- Reset the device while pressing the volume down button.
I also formatted the SD before copying it over.

No there was only one for t mobile !
cheers for the link matey

yea its odd that, the o2 3.14 rom is there via direct link, has been since saturday, but still doesn't show if you navigate to the rom updates page on htc.uk

ok updated the hspl fine...but when i try to flash the new WWE rom i get an "invalid vendor id" at 1% and the flash fails

righty all sorted ! the O2 rom was on the UK site i was being dumb and look on htc Europe site !
all flashed and working fine now